3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 7ee06cb2f840a96be46233181ed4557901a74385 ]

The classic PC rtc-coms driver has a workaround for broken ACPI device nodes for it which lack an irq resource. This workaround used to unconditionally hardcode the irq to 8 in these cases.

This was causing irq conflict problems on systems without a legacy-pic so a recent patch added an if (nr_legacy_irqs()) guard to the workaround to avoid this irq conflict.

nr_legacy_irqs() uses the legacy_pic symbol under the hood causing an undefined symbol error if the rtc-cmos code is build as a module.

This commit exports the legacy_pic symbol to fix this.

Cc: rtc-linux@googlegroups.com Cc: alexandre.belloni@free-electrons.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Alexandre Belloni alexandre.belloni@free-electrons.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kernel/i8259.c | 1 + 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -405,6 +405,7 @@ struct legacy_pic default_legacy_pic = { };

struct legacy_pic *legacy_pic = &default_legacy_pic; +EXPORT_SYMBOL(legacy_pic);

static int __init i8259A_init_ops(void) {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner tglx@linutronix.de

[ Upstream commit 8153f9ac43897f9f4786b30badc134fcc1a4fb11 ]

acpi_processor_get_throttling() requires to invoke the getter function on the target CPU. This is achieved by temporarily setting the affinity of the calling user space thread to the requested CPU and reset it to the original affinity afterwards.

That's racy vs. CPU hotplug and concurrent affinity settings for that thread resulting in code executing on the wrong CPU and overwriting the new affinity setting.

acpi_processor_get_throttling() is invoked in two ways:

1) The CPU online callback, which is already running on the target CPU and obviously protected against hotplug and not affected by affinity settings.

2) The ACPI driver probe function, which is not protected against hotplug during modprobe.

Switch it over to work_on_cpu() and protect the probe function against CPU hotplug.

Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Fenghua Yu fenghua.yu@intel.com Cc: Tony Luck tony.luck@intel.com Cc: Herbert Xu herbert@gondor.apana.org.au Cc: "Rafael J. Wysocki" rjw@rjwysocki.net Cc: Peter Zijlstra peterz@infradead.org Cc: Benjamin Herrenschmidt benh@kernel.crashing.org Cc: Sebastian Siewior bigeasy@linutronix.de Cc: Lai Jiangshan jiangshanlai@gmail.com Cc: linux-acpi@vger.kernel.org Cc: Viresh Kumar viresh.kumar@linaro.org Cc: Michael Ellerman mpe@ellerman.id.au Cc: Tejun Heo tj@kernel.org Cc: "David S. Miller" davem@davemloft.net Cc: Len Brown lenb@kernel.org Link: http://lkml.kernel.org/r/20170412201042.785920903@linutronix.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/acpi/processor_driver.c | 7 +++- drivers/acpi/processor_throttling.c | 62 ++++++++++++++++++++---------------- 2 files changed, 42 insertions(+), 27 deletions(-)

--- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -231,11 +231,16 @@ static int __acpi_processor_start(struct static int acpi_processor_start(struct device *dev) { struct acpi_device *device = ACPI_COMPANION(dev); + int ret;

if (!device) return -ENODEV;

- return __acpi_processor_start(device); + /* Protect against concurrent CPU hotplug operations */ + get_online_cpus(); + ret = __acpi_processor_start(device); + put_online_cpus(); + return ret; }

static int acpi_processor_stop(struct device *dev) --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -66,8 +66,8 @@ struct acpi_processor_throttling_arg { #define THROTTLING_POSTCHANGE (2)

static int acpi_processor_get_throttling(struct acpi_processor *pr); -int acpi_processor_set_throttling(struct acpi_processor *pr, - int state, bool force); +static int __acpi_processor_set_throttling(struct acpi_processor *pr, + int state, bool force, bool direct);

static int acpi_processor_update_tsd_coord(void) { @@ -886,7 +886,8 @@ static int acpi_processor_get_throttling ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid throttling state, reset\n")); state = 0; - ret = acpi_processor_set_throttling(pr, state, true); + ret = __acpi_processor_set_throttling(pr, state, true, + true); if (ret) return ret; } @@ -896,36 +897,31 @@ static int acpi_processor_get_throttling return 0; }

-static int acpi_processor_get_throttling(struct acpi_processor *pr) +static long __acpi_processor_get_throttling(void *data) { - cpumask_var_t saved_mask; - int ret; + struct acpi_processor *pr = data; + + return pr->throttling.acpi_processor_get_throttling(pr); +}

+static int acpi_processor_get_throttling(struct acpi_processor *pr) +{ if (!pr) return -EINVAL;

if (!pr->flags.throttling) return -ENODEV;

- if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL)) - return -ENOMEM; - /* - * Migrate task to the cpu pointed by pr. + * This is either called from the CPU hotplug callback of + * processor_driver or via the ACPI probe function. In the latter + * case the CPU is not guaranteed to be online. Both call sites are + * protected against CPU hotplug. */ - cpumask_copy(saved_mask, &current->cpus_allowed); - /* FIXME: use work_on_cpu() */ - if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) { - /* Can't migrate to the target pr->id CPU. Exit */ - free_cpumask_var(saved_mask); + if (!cpu_online(pr->id)) return -ENODEV; - } - ret = pr->throttling.acpi_processor_get_throttling(pr); - /* restore the previous state */ - set_cpus_allowed_ptr(current, saved_mask); - free_cpumask_var(saved_mask);

- return ret; + return work_on_cpu(pr->id, __acpi_processor_get_throttling, pr); }

static int acpi_processor_get_fadt_info(struct acpi_processor *pr) @@ -1075,8 +1071,15 @@ static long acpi_processor_throttling_fn arg->target_state, arg->force); }

-int acpi_processor_set_throttling(struct acpi_processor *pr, - int state, bool force) +static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct) +{ + if (direct) + return fn(arg); + return work_on_cpu(cpu, fn, arg); +} + +static int __acpi_processor_set_throttling(struct acpi_processor *pr, + int state, bool force, bool direct) { int ret = 0; unsigned int i; @@ -1125,7 +1128,8 @@ int acpi_processor_set_throttling(struct arg.pr = pr; arg.target_state = state; arg.force = force; - ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, &arg); + ret = call_on_cpu(pr->id, acpi_processor_throttling_fn, &arg, + direct); } else { /* * When the T-state coordination is SW_ALL or HW_ALL, @@ -1158,8 +1162,8 @@ int acpi_processor_set_throttling(struct arg.pr = match_pr; arg.target_state = state; arg.force = force; - ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, - &arg); + ret = call_on_cpu(pr->id, acpi_processor_throttling_fn, + &arg, direct); } } /* @@ -1177,6 +1181,12 @@ int acpi_processor_set_throttling(struct return ret; }

+int acpi_processor_set_throttling(struct acpi_processor *pr, int state, + bool force) +{ + return __acpi_processor_set_throttling(pr, state, force, false); +} + int acpi_processor_get_throttling_info(struct acpi_processor *pr) { int result = 0;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 ]

When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction flags get filled with the trigger type from the irq_data:

if (!(new->flags & IRQF_TRIGGER_MASK)) new->flags |= irqd_get_trigger_type(&desc->irq_data);

On the first setup_irq() the trigger type in irq_data is NONE when the above code executes, then the irq is started up for the first time and then the actual trigger type gets established, but that's too late to fix up new->flags.

When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE its irqaction's triggertype gets set to the actual trigger type and the following check fails:

if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))

Resulting in the request_irq failing with -EBUSY even though both users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE

Fix this by comparing the new irqaction's trigger type to the trigger type stored in the irq_data which correctly reflects the actual trigger type being used for the irq.

Suggested-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Marc Zyngier marc.zyngier@arm.com Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/irq/manage.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1058,8 +1058,10 @@ __setup_irq(unsigned int irq, struct irq * set the trigger type must match. Also all must * agree on ONESHOT. */ + unsigned int oldtype = irqd_get_trigger_type(&desc->irq_data); + if (!((old->flags & new->flags) & IRQF_SHARED) || - ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) || + (oldtype != (new->flags & IRQF_TRIGGER_MASK)) || ((old->flags ^ new->flags) & IRQF_ONESHOT)) goto mismatch;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Ahern dsa@cumulusnetworks.com

[ Upstream commit 4a6e3c5def13c91adf2acc613837001f09af3baa ]

ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is set to 1, gratuitous arp requests are sent when the device is brought up. The same is expected when ndisc_notify is set to 1 (per ndisc_notify in Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP event; add it.

Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by: David Ahern dsa@cumulusnetworks.com Acked-by: Hannes Frederic Sowa hannes@stressinduktion.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/ndisc.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1646,6 +1646,8 @@ static int ndisc_netdev_event(struct not case NETDEV_CHANGEADDR: neigh_changeaddr(&nd_tbl, dev); fib6_run_gc(0, net, false); + /* fallthrough */ + case NETDEV_UP: idev = in6_dev_get(dev); if (!idev) break;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Marek Vasut marex@denx.de

[ Upstream commit 400c18e3dc86e04ef5afec9b86a8586ca629b9e9 ]

The dw_mmio driver disables the block clock before unregistering the host. The code unregistering the host may access the SPI block registers. If register access happens with block clock disabled, this may lead to a bus hang. Disable the clock after unregistering the host to prevent such situation.

This bug was observed on Altera Cyclone V SoC.

Signed-off-by: Marek Vasut marex@denx.de Cc: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Mark Brown broonie@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/spi/spi-dw-mmio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -118,8 +118,8 @@ static int dw_spi_mmio_remove(struct pla { struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);

- clk_disable_unprepare(dwsmmio->clk); dw_spi_remove_host(&dwsmmio->dws); + clk_disable_unprepare(dwsmmio->clk);

return 0; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Gibson david@gibson.dropbear.id.au

[ Upstream commit 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 ]

Passed through SCSI targets may have transfer limits which come from the host SCSI controller or something on the host side other than the target itself.

To make this work properly, the hypervisor can adjust the target's VPD information to advertise these limits. But for that to work, the guest has to look at the VPD pages, which we won't do by default if it is an SPC-2 device, even if it does actually support it.

This adds a workaround to address this, forcing devices attached to a virtio-scsi controller to always check the VPD pages. This is modelled on a similar workaround for the storvsc (Hyper-V) SCSI controller, although that exists for slightly different reasons.

A specific case which causes this is a volume from IBM's IPR RAID controller (which presents as an SPC-2 device, although it does support VPD) passed through with qemu's 'scsi-block' device.

[mkp: fixed typo]

Signed-off-by: David Gibson david@gibson.dropbear.id.au Acked-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/virtio_scsi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)

--- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -28,6 +28,7 @@ #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_tcq.h> +#include <scsi/scsi_devinfo.h> #include <linux/seqlock.h>

#define VIRTIO_SCSI_MEMPOOL_SZ 64 @@ -664,6 +665,28 @@ static int virtscsi_device_reset(struct return virtscsi_tmf(vscsi, cmd); }

+static int virtscsi_device_alloc(struct scsi_device *sdevice) +{ + /* + * Passed through SCSI targets (e.g. with qemu's 'scsi-block') + * may have transfer limits which come from the host SCSI + * controller or something on the host side other than the + * target itself. + * + * To make this work properly, the hypervisor can adjust the + * target's VPD information to advertise these limits. But + * for that to work, the guest has to look at the VPD pages, + * which we won't do by default if it is an SPC-2 device, even + * if it does actually support it. + * + * So, set the blist to always try to read the VPD pages. + */ + sdevice->sdev_bflags = BLIST_TRY_VPD_PAGES; + + return 0; +} + + /** * virtscsi_change_queue_depth() - Change a virtscsi target's queue depth * @sdev: Virtscsi target whose queue depth to change @@ -752,6 +775,7 @@ static struct scsi_host_template virtscs .change_queue_depth = virtscsi_change_queue_depth, .eh_abort_handler = virtscsi_abort, .eh_device_reset_handler = virtscsi_device_reset, + .slave_alloc = virtscsi_device_alloc,

.can_queue = 1024, .dma_boundary = UINT_MAX,

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet edumazet@google.com

[ Upstream commit 0f9fa831aecfc297b7b45d4f046759bcefcf87f0 ]

When using TCP FastOpen for an active session, we send one wakeup event from tcp_finish_connect(), right before the data eventually contained in the received SYNACK is queued to sk->sk_receive_queue.

This means that depending on machine load or luck, poll() users might receive POLLOUT events instead of POLLIN|POLLOUT

To fix this, we need to move the call to sk->sk_state_change() after the (optional) call to tcp_rcv_fastopen_synack()

Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: Yuchung Cheng ycheng@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp_input.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5322,10 +5322,6 @@ void tcp_finish_connect(struct sock *sk, else tp->pred_flags = 0;

- if (!sock_flag(sk, SOCK_DEAD)) { - sk->sk_state_change(sk); - sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT); - } }

static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack, @@ -5380,6 +5376,7 @@ static int tcp_rcv_synsent_state_process struct tcp_sock *tp = tcp_sk(sk); struct tcp_fastopen_cookie foc = { .len = -1 }; int saved_clamp = tp->rx_opt.mss_clamp; + bool fastopen_fail;

tcp_parse_options(skb, &tp->rx_opt, 0, &foc); if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr) @@ -5482,10 +5479,15 @@ static int tcp_rcv_synsent_state_process

tcp_finish_connect(sk, skb);

- if ((tp->syn_fastopen || tp->syn_data) && - tcp_rcv_fastopen_synack(sk, skb, &foc)) - return -1; + fastopen_fail = (tp->syn_fastopen || tp->syn_data) && + tcp_rcv_fastopen_synack(sk, skb, &foc);

+ if (!sock_flag(sk, SOCK_DEAD)) { + sk->sk_state_change(sk); + sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT); + } + if (fastopen_fail) + return -1; if (sk->sk_write_pending || icsk->icsk_accept_queue.rskq_defer_accept || icsk->icsk_ack.pingpong) {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikhail Paulyshka me@mixaill.tk

[ Upstream commit fc7438b1eb12b6c93d7b7a62423779eb5dfc673c ]

Headset microphone does not work out of the box on ASUS Nx51 laptops. This patch fixes it.

Patch tested on Asus N551 laptop. Asus N751 part is not tested, but according to [1] this laptop uses the same audiosystem.

1. https://bugzilla.kernel.org/show_bug.cgi?id=117781

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437 Signed-off-by: Mikhail Paulyshka me@mixaill.tk Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6493,6 +6493,7 @@ enum { ALC668_FIXUP_DELL_DISABLE_AAMIX, ALC668_FIXUP_DELL_XPS13, ALC662_FIXUP_ASUS_Nx50, + ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE, ALC668_FIXUP_ASUS_Nx51, };

@@ -6740,14 +6741,21 @@ static const struct hda_fixup alc662_fix .chained = true, .chain_id = ALC662_FIXUP_BASS_1A }, + [ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_headset_mode_alc668, + .chain_id = ALC662_FIXUP_BASS_CHMAP + }, [ALC668_FIXUP_ASUS_Nx51] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { - {0x1a, 0x90170151}, /* bass speaker */ + { 0x19, 0x03a1913d }, /* use as headphone mic, without its own jack detect */ + { 0x1a, 0x90170151 }, /* bass speaker */ + { 0x1b, 0x03a1113c }, /* use as headset mic, without its own jack detect */ {} }, .chained = true, - .chain_id = ALC662_FIXUP_BASS_CHMAP, + .chain_id = ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE, }, };

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 3026050179a3a9a6f5c892c414b5e36ecf092081 ]

If skb_pad() fails then it frees skb and we don't need to free it again at the end of the function.

Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Sebastian Reichel sre@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hsi/clients/ssi_protocol.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/hsi/clients/ssi_protocol.c +++ b/drivers/hsi/clients/ssi_protocol.c @@ -976,7 +976,7 @@ static int ssip_pn_xmit(struct sk_buff * goto drop; /* Pad to 32-bits - FIXME: Revisit*/ if ((skb->len & 3) && skb_pad(skb, 4 - (skb->len & 3))) - goto drop; + goto inc_dropped;

/* * Modem sends Phonet messages over SSI with its own endianess... @@ -1028,8 +1028,9 @@ static int ssip_pn_xmit(struct sk_buff * drop2: hsi_free_msg(msg); drop: - dev->stats.tx_dropped++; dev_kfree_skb(skb); +inc_dropped: + dev->stats.tx_dropped++;

return 0; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit ec5ab8933772c87f24ad62a4a602fe8949f423c2 ]

devm_pinctrl_get() returns error pointers, it never returns NULL.

Fixes: 455e5cd6f736 ("mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/omap_hsmmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1757,8 +1757,8 @@ static int omap_hsmmc_configure_wake_irq */ if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) { struct pinctrl *p = devm_pinctrl_get(host->dev); - if (!p) { - ret = -ENODEV; + if (IS_ERR(p)) { + ret = PTR_ERR(p); goto err_free_irq; } if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pan Bian bianpan2016@163.com

[ Upstream commit 91ec701a553cb3de470fd471c6fefe3ad1125455 ]

Function pci_find_ext_capability() may return 0, which is an invalid address. In function qlcnic_sriov_virtid_fn(), its return value is used without validation. This may result in invalid memory access bugs. This patch fixes the bug.

Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -126,6 +126,8 @@ static int qlcnic_sriov_virtid_fn(struct return 0;

pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) + return 0; pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset); pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pan Bian bianpan2016@163.com

[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function rndis_wlan_bind(), its return value is not checked. This may cause NULL dereference bugs. This patch fixes it.

Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/rndis_wlan.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -3425,6 +3425,10 @@ static int rndis_wlan_bind(struct usbnet

/* because rndis_command() sleeps we need to use workqueue */ priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + if (!priv->workqueue) { + wiphy_free(wiphy); + return -ENOMEM; + } INIT_WORK(&priv->work, rndis_wlan_worker); INIT_DELAYED_WORK(&priv->dev_poller_work, rndis_device_poller); INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach emmanuel.grumbach@intel.com

[ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ]

ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration.

When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted.

Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted.

Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Signed-off-by: Luca Coelho luciano.coelho@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/status.c | 1 + 1 file changed, 1 insertion(+)

--- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -194,6 +194,7 @@ static void ieee80211_frame_acked(struct }

if (ieee80211_is_action(mgmt->frame_control) && + !ieee80211_has_protected(mgmt->frame_control) && mgmt->u.action.category == WLAN_CATEGORY_HT && mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS && ieee80211_sdata_running(sdata)) {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kishon Vijay Abraham I kishon@ti.com

[ Upstream commit 2c949ce38f4e81d7487f165fa3b8f77d74a2a6c4 ]

The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC mode. However in EP mode, the host system is not able to access the MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it.

Acked-by: Tony Lindgren tony@atomide.com Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -524,7 +524,7 @@ static struct clockdomain pcie_7xx_clkdm .dep_bit = DRA7XX_PCIE_STATDEP_SHIFT, .wkdep_srcs = pcie_wkup_sleep_deps, .sleepdep_srcs = pcie_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, };

static struct clockdomain atl_7xx_clkdm = {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Scott Wood swood@redhat.com

[ Upstream commit 9b70de6d0266888b3743f03802502e43131043c8 ]

The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics.

Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses.

This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops:

Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761da) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160

Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2024,6 +2024,7 @@ static void bnx2x_set_rx_buf_size(struct ETH_OVREHEAD + mtu + BNX2X_FW_RX_ALIGN_END; + fp->rx_buf_size = SKB_DATA_ALIGN(fp->rx_buf_size); /* Note : rx_buf_size doesn't take into account NET_SKB_PAD */ if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE) fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shaohua Li shli@fb.com

[ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ]

Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores a case in reshape, the first rdev could be a spare disk, which shouldn't be accounted as the first disk since it doesn't include the offset info.

Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop) Cc: Guoqing Jiang gqjiang@suse.com Cc: NeilBrown neilb@suse.com Signed-off-by: Shaohua Li shli@fb.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/raid10.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -4132,6 +4132,7 @@ static int raid10_start_reshape(struct m diff = 0; if (first || diff < min_offset_diff) min_offset_diff = diff; + first = 0; } }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov khoroshilov@ispras.ru

[ Upstream commit dc85e9a87420613b3129d5cc5ecd79c58351c546 ]

If fbmem iomemory mapping failed, sm501fb_start() breaks off initialization, deallocates resources, but returns zero. As a result, double deallocation can happen in sm501fb_stop().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov khoroshilov@ispras.ru Cc: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/fbdev/sm501fb.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/video/fbdev/sm501fb.c +++ b/drivers/video/fbdev/sm501fb.c @@ -1600,6 +1600,7 @@ static int sm501fb_start(struct sm501fb_ info->fbmem = ioremap(res->start, resource_size(res)); if (info->fbmem == NULL) { dev_err(dev, "cannot remap framebuffer\n"); + ret = -ENXIO; goto err_mem_res; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Prakash Kamliya pkamliya@codeaurora.org

[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ]

get_pages doesn't keep a reference of the pages allocated when it fails later in the code path. This can lead to a memory leak. Keep reference of the allocated pages so that it can be freed when msm_gem_free_object gets called later during cleanup.

Signed-off-by: Prakash Kamliya pkamliya@codeaurora.org Signed-off-by: Sharat Masetty smasetty@codeaurora.org Signed-off-by: Rob Clark robdclark@gmail.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/msm/msm_gem.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -83,14 +83,17 @@ static struct page **get_pages(struct dr return p; }

+ msm_obj->pages = p; + msm_obj->sgt = drm_prime_pages_to_sg(p, npages); if (IS_ERR(msm_obj->sgt)) { + void *ptr = ERR_CAST(msm_obj->sgt); + dev_err(dev->dev, "failed to allocate sgt\n"); - return ERR_CAST(msm_obj->sgt); + msm_obj->sgt = NULL; + return ptr; }

- msm_obj->pages = p; - /* For non-cached buffers, ensure the new pages are clean * because display controller, GPU, etc. are not coherent: */ @@ -113,7 +116,10 @@ static void put_pages(struct drm_gem_obj if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED)) dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl, msm_obj->sgt->nents, DMA_BIDIRECTIONAL); - sg_free_table(msm_obj->sgt); + + if (msm_obj->sgt) + sg_free_table(msm_obj->sgt); + kfree(msm_obj->sgt);

if (iommu_present(&platform_bus_type))

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ron Economos w6rz@comcast.net

[ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ]

On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.

Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.

Signed-off-by: Ron Economos w6rz@comcast.net Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/dvb-frontends/si2168.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/media/dvb-frontends/si2168.c +++ b/drivers/media/dvb-frontends/si2168.c @@ -14,6 +14,8 @@ * GNU General Public License for more details. */

+#include <linux/delay.h> + #include "si2168_priv.h"

static const struct dvb_frontend_ops si2168_ops; @@ -380,6 +382,7 @@ static int si2168_init(struct dvb_fronte if (ret) goto err;

+ udelay(100); memcpy(cmd.args, "\x85", 1); cmd.wlen = 1; cmd.rlen = 1;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Erez Shitrit erezsh@mellanox.com

[ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ]

The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions.

Ensure the database key does not change after the SA query completes.

Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory.

Signed-off-by: Erez Shitrit erezsh@mellanox.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -488,6 +488,22 @@ static void path_rec_completion(int stat spin_lock_irqsave(&priv->lock, flags);

if (!IS_ERR_OR_NULL(ah)) { + /* + * pathrec.dgid is used as the database key from the LLADDR, + * it must remain unchanged even if the SA returns a different + * GID to use in the AH. + */ + if (memcmp(pathrec->dgid.raw, path->pathrec.dgid.raw, + sizeof(union ib_gid))) { + ipoib_dbg( + priv, + "%s got PathRec for gid %pI6 while asked for %pI6\n", + dev->name, pathrec->dgid.raw, + path->pathrec.dgid.raw); + memcpy(pathrec->dgid.raw, path->pathrec.dgid.raw, + sizeof(union ib_gid)); + } + path->pathrec = *pathrec;

old_ah = path->ah;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas bhelgaas@google.com

[ Upstream commit c82084117f79bcae085e40da526253736a247120 ]

Set the resource type when we reserve VGA-related I/O port resources.

The resource code doesn't actually look at the type, so it inserts resources without a type in the tree correctly even without this change. But if we ever print a resource without a type, it looks like this:

vga+ [??? 0x000003c0-0x000003df flags 0x0]

Setting the type means it will be printed correctly as:

vga+ [io 0x000003c0-0x000003df]

Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/alpha/kernel/console.c | 1 + drivers/video/console/vgacon.c | 34 ++++++++++++++++++++++++++-------- 2 files changed, 27 insertions(+), 8 deletions(-)

--- a/arch/alpha/kernel/console.c +++ b/arch/alpha/kernel/console.c @@ -20,6 +20,7 @@ struct pci_controller *pci_vga_hose; static struct resource alpha_vga = { .name = "alpha-vga+", + .flags = IORESOURCE_IO, .start = 0x3C0, .end = 0x3DF }; --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -409,7 +409,10 @@ static const char *vgacon_startup(void) vga_video_port_val = VGA_CRT_DM; if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) { static struct resource ega_console_resource = - { .name = "ega", .start = 0x3B0, .end = 0x3BF }; + { .name = "ega", + .flags = IORESOURCE_IO, + .start = 0x3B0, + .end = 0x3BF }; vga_video_type = VIDEO_TYPE_EGAM; vga_vram_size = 0x8000; display_desc = "EGA+"; @@ -417,9 +420,15 @@ static const char *vgacon_startup(void) &ega_console_resource); } else { static struct resource mda1_console_resource = - { .name = "mda", .start = 0x3B0, .end = 0x3BB }; + { .name = "mda", + .flags = IORESOURCE_IO, + .start = 0x3B0, + .end = 0x3BB }; static struct resource mda2_console_resource = - { .name = "mda", .start = 0x3BF, .end = 0x3BF }; + { .name = "mda", + .flags = IORESOURCE_IO, + .start = 0x3BF, + .end = 0x3BF }; vga_video_type = VIDEO_TYPE_MDA; vga_vram_size = 0x2000; display_desc = "*MDA"; @@ -441,15 +450,21 @@ static const char *vgacon_startup(void) vga_vram_size = 0x8000;

if (!screen_info.orig_video_isVGA) { - static struct resource ega_console_resource - = { .name = "ega", .start = 0x3C0, .end = 0x3DF }; + static struct resource ega_console_resource = + { .name = "ega", + .flags = IORESOURCE_IO, + .start = 0x3C0, + .end = 0x3DF }; vga_video_type = VIDEO_TYPE_EGAC; display_desc = "EGA"; request_resource(&ioport_resource, &ega_console_resource); } else { - static struct resource vga_console_resource - = { .name = "vga+", .start = 0x3C0, .end = 0x3DF }; + static struct resource vga_console_resource = + { .name = "vga+", + .flags = IORESOURCE_IO, + .start = 0x3C0, + .end = 0x3DF }; vga_video_type = VIDEO_TYPE_VGAC; display_desc = "VGA+"; request_resource(&ioport_resource, @@ -493,7 +508,10 @@ static const char *vgacon_startup(void) } } else { static struct resource cga_console_resource = - { .name = "cga", .start = 0x3D4, .end = 0x3D5 }; + { .name = "cga", + .flags = IORESOURCE_IO, + .start = 0x3D4, + .end = 0x3D5 }; vga_video_type = VIDEO_TYPE_CGA; vga_vram_size = 0x2000; display_desc = "*CGA";

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ]

In case a platform only defaults a "default" set of pins, but not a "sleep" set of pins, and this particular platform suspends and resumes in a way that the pin states are not preserved by the hardware, when we resume, we would call pinctrl_single_resume() -> pinctrl_force_default() -> pinctrl_select_state() and the first thing we do is check that the pins state is the same as before, and do nothing.

In order to fix this, decouple the actual state change from pinctrl_select_state() and move it pinctrl_commit_state(), while keeping the p->state == state check in pinctrl_select_state() not to change the caller assumptions. pinctrl_force_sleep() and pinctrl_force_default() are updated to bypass the state check by calling pinctrl_commit_state().

[Linus Walleij] The forced pin control states are currently only used in some pin controller drivers that grab their own reference to their own pins. This is equal to the pin control hogs: pins taken by pin control devices since there are no corresponding device in the Linux device hierarchy, such as memory controller lines or unused GPIO lines, or GPIO lines that are used orthogonally from the GPIO subsystem but pincontrol-wise managed as hogs (non-strict mode, allowing simultaneous use by GPIO and pin control). For this case forcing the state from the drivers' suspend()/resume() callbacks makes sense and should semantically match the name of the function.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/core.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -977,19 +977,16 @@ struct pinctrl_state *pinctrl_lookup_sta EXPORT_SYMBOL_GPL(pinctrl_lookup_state);

/** - * pinctrl_select_state() - select/activate/program a pinctrl state to HW + * pinctrl_commit_state() - select/activate/program a pinctrl state to HW * @p: the pinctrl handle for the device that requests configuration * @state: the state handle to select/activate/program */ -int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state) +static int pinctrl_commit_state(struct pinctrl *p, struct pinctrl_state *state) { struct pinctrl_setting *setting, *setting2; struct pinctrl_state *old_state = p->state; int ret;

- if (p->state == state) - return 0; - if (p->state) { /* * For each pinmux setting in the old state, forget SW's record @@ -1053,6 +1050,19 @@ unapply_new_state:

return ret; } + +/** + * pinctrl_select_state() - select/activate/program a pinctrl state to HW + * @p: the pinctrl handle for the device that requests configuration + * @state: the state handle to select/activate/program + */ +int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state) +{ + if (p->state == state) + return 0; + + return pinctrl_commit_state(p, state); +} EXPORT_SYMBOL_GPL(pinctrl_select_state);

static void devm_pinctrl_release(struct device *dev, void *res) @@ -1221,7 +1231,7 @@ void pinctrl_unregister_map(struct pinct int pinctrl_force_sleep(struct pinctrl_dev *pctldev) { if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_sleep)) - return pinctrl_select_state(pctldev->p, pctldev->hog_sleep); + return pinctrl_commit_state(pctldev->p, pctldev->hog_sleep); return 0; } EXPORT_SYMBOL_GPL(pinctrl_force_sleep); @@ -1233,7 +1243,7 @@ EXPORT_SYMBOL_GPL(pinctrl_force_sleep); int pinctrl_force_default(struct pinctrl_dev *pctldev) { if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_default)) - return pinctrl_select_state(pctldev->p, pctldev->hog_default); + return pinctrl_commit_state(pctldev->p, pctldev->hog_default); return 0; } EXPORT_SYMBOL_GPL(pinctrl_force_default);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky leonro@mellanox.com

commit 7688f2c3bbf55e52388e37ac5d63ca471a7712e1 upstream.

The attempt to join multicast group without ensuring that CMA device exists will lead to the following crash reported by syzkaller.

[ 64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0 [ 64.076797] Read of size 8 at addr 00000000000000b0 by task join/691 [ 64.076797] [ 64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.076803] Call Trace: [ 64.076809] dump_stack+0x5c/0x77 [ 64.076817] kasan_report+0x163/0x380 [ 64.085859] ? rdma_join_multicast+0x26e/0x12c0 [ 64.086634] rdma_join_multicast+0x26e/0x12c0 [ 64.087370] ? rdma_disconnect+0xf0/0xf0 [ 64.088579] ? __radix_tree_replace+0xc3/0x110 [ 64.089132] ? node_tag_clear+0x81/0xb0 [ 64.089606] ? idr_alloc_u32+0x12e/0x1a0 [ 64.090517] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.091768] ? tracing_record_taskinfo+0x10/0xc0 [ 64.092340] ? idr_alloc+0x76/0xc0 [ 64.092951] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.093632] ? ucma_process_join+0x23d/0x460 [ 64.094510] ucma_process_join+0x23d/0x460 [ 64.095199] ? ucma_migrate_id+0x440/0x440 [ 64.095696] ? futex_wake+0x10b/0x2a0 [ 64.096159] ucma_join_multicast+0x88/0xe0 [ 64.096660] ? ucma_process_join+0x460/0x460 [ 64.097540] ? _copy_from_user+0x5e/0x90 [ 64.098017] ucma_write+0x174/0x1f0 [ 64.098640] ? ucma_resolve_route+0xf0/0xf0 [ 64.099343] ? rb_erase_cached+0x6c7/0x7f0 [ 64.099839] __vfs_write+0xc4/0x350 [ 64.100622] ? perf_syscall_enter+0xe4/0x5f0 [ 64.101335] ? kernel_read+0xa0/0xa0 [ 64.103525] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.105510] ? syscall_exit_register+0x2a0/0x2a0 [ 64.107359] ? __switch_to+0x351/0x640 [ 64.109285] ? fsnotify+0x899/0x8f0 [ 64.111610] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.113876] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.115813] ? ring_buffer_record_is_on+0xd/0x20 [ 64.117824] ? __fget+0xa8/0xf0 [ 64.119869] vfs_write+0xf7/0x280 [ 64.122001] SyS_write+0xa1/0x120 [ 64.124213] ? SyS_read+0x120/0x120 [ 64.126644] ? SyS_read+0x120/0x120 [ 64.128563] do_syscall_64+0xeb/0x250 [ 64.130732] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.132984] RIP: 0033:0x7f5c994ade99 [ 64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.151060] [ 64.153703] Disabling lock debugging due to kernel taint [ 64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 [ 64.159066] IP: rdma_join_multicast+0x26e/0x12c0 [ 64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0 [ 64.164442] Oops: 0000 [#1] SMP KASAN PTI [ 64.166817] CPU: 1 PID: 691 Comm: join Tainted: G B 4.16.0-rc1-00219-gb97853b65b93 #23 [ 64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4 [ 64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0 [ 64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282 [ 64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522 [ 64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297 [ 64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7 [ 64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000 [ 64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400 [ 64.196105] FS: 00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000 [ 64.199211] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0 [ 64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 64.211554] Call Trace: [ 64.213464] ? rdma_disconnect+0xf0/0xf0 [ 64.216124] ? __radix_tree_replace+0xc3/0x110 [ 64.219337] ? node_tag_clear+0x81/0xb0 [ 64.222140] ? idr_alloc_u32+0x12e/0x1a0 [ 64.224422] ? __fprop_inc_percpu_max+0x150/0x150 [ 64.226588] ? tracing_record_taskinfo+0x10/0xc0 [ 64.229763] ? idr_alloc+0x76/0xc0 [ 64.232186] ? idr_alloc_u32+0x1a0/0x1a0 [ 64.234505] ? ucma_process_join+0x23d/0x460 [ 64.237024] ucma_process_join+0x23d/0x460 [ 64.240076] ? ucma_migrate_id+0x440/0x440 [ 64.243284] ? futex_wake+0x10b/0x2a0 [ 64.245302] ucma_join_multicast+0x88/0xe0 [ 64.247783] ? ucma_process_join+0x460/0x460 [ 64.250841] ? _copy_from_user+0x5e/0x90 [ 64.253878] ucma_write+0x174/0x1f0 [ 64.257008] ? ucma_resolve_route+0xf0/0xf0 [ 64.259877] ? rb_erase_cached+0x6c7/0x7f0 [ 64.262746] __vfs_write+0xc4/0x350 [ 64.265537] ? perf_syscall_enter+0xe4/0x5f0 [ 64.267792] ? kernel_read+0xa0/0xa0 [ 64.270358] ? perf_sched_cb_inc+0xc0/0xc0 [ 64.272575] ? syscall_exit_register+0x2a0/0x2a0 [ 64.275367] ? __switch_to+0x351/0x640 [ 64.277700] ? fsnotify+0x899/0x8f0 [ 64.280530] ? fsnotify_unmount_inodes+0x170/0x170 [ 64.283156] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 64.286182] ? ring_buffer_record_is_on+0xd/0x20 [ 64.288749] ? __fget+0xa8/0xf0 [ 64.291136] vfs_write+0xf7/0x280 [ 64.292972] SyS_write+0xa1/0x120 [ 64.294965] ? SyS_read+0x120/0x120 [ 64.297474] ? SyS_read+0x120/0x120 [ 64.299751] do_syscall_64+0xeb/0x250 [ 64.301826] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 64.304352] RIP: 0033:0x7f5c994ade99 [ 64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99 [ 64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015 [ 64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000 [ 64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0 [ 64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0 [ 64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8 [ 64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860 [ 64.332979] CR2: 00000000000000b0 [ 64.335550] ---[ end trace 0c00c17a408849c1 ]---

Reported-by: syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support") Signed-off-by: Leon Romanovsky leonro@mellanox.com Reviewed-by: Sean Hefty sean.hefty@intel.com Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/core/cma.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -3350,6 +3350,9 @@ int rdma_join_multicast(struct rdma_cm_i struct cma_multicast *mc; int ret;

+ if (!id->device) + return -EINVAL; + id_priv = container_of(id, struct rdma_id_private, id); if (!cma_comp(id_priv, RDMA_CM_ADDR_BOUND) && !cma_comp(id_priv, RDMA_CM_ADDR_RESOLVED))