From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 960cdd50ca9fdfeb82c2757107bcb7f93c8d7d41 ]
HID made of either Wolfson/CirrusLogic PCI ID + 8804 identifier.
This helps enumerate the HifiBerry Digi+ HAT boards on the Up2 platform.
The scripts at https://github.com/thesofproject/acpi-scripts can be used to add the ACPI initrd overlays.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/soc/codecs/wm8804-i2c.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wm8804-i2c.c b/sound/soc/codecs/wm8804-i2c.c index f27464c2c5ba..79541960f45d 100644 --- a/sound/soc/codecs/wm8804-i2c.c +++ b/sound/soc/codecs/wm8804-i2c.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h> +#include <linux/acpi.h>
#include "wm8804.h"
@@ -40,17 +41,29 @@ static const struct i2c_device_id wm8804_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8804_i2c_id);
+#if defined(CONFIG_OF) static const struct of_device_id wm8804_of_match[] = { { .compatible = "wlf,wm8804", }, { } }; MODULE_DEVICE_TABLE(of, wm8804_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id wm8804_acpi_match[] = { + { "1AEC8804", 0 }, /* Wolfson PCI ID + part ID */ + { "10138804", 0 }, /* Cirrus Logic PCI ID + part ID */ + { }, +}; +MODULE_DEVICE_TABLE(acpi, wm8804_acpi_match); +#endif
static struct i2c_driver wm8804_i2c_driver = { .driver = { .name = "wm8804", .pm = &wm8804_pm, - .of_match_table = wm8804_of_match, + .of_match_table = of_match_ptr(wm8804_of_match), + .acpi_match_table = ACPI_PTR(wm8804_acpi_match), }, .probe = wm8804_i2c_probe, .remove = wm8804_i2c_remove,
From: Danny Smith danny.smith@axis.com
[ Upstream commit 5ea752c6efdf5aa8a57aed816d453a8f479f1b0a ]
Fixed range in safeload conditional to allow safeload to up to 20 bytes, without a lower limit.
Signed-off-by: Danny Smith dannys@axis.com Acked-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/soc/codecs/sigmadsp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/soc/codecs/sigmadsp.c b/sound/soc/codecs/sigmadsp.c index d53680ac78e4..6df158669420 100644 --- a/sound/soc/codecs/sigmadsp.c +++ b/sound/soc/codecs/sigmadsp.c @@ -117,8 +117,7 @@ static int sigmadsp_ctrl_write(struct sigmadsp *sigmadsp, struct sigmadsp_control *ctrl, void *data) { /* safeload loads up to 20 bytes in a atomic operation */ - if (ctrl->num_bytes > 4 && ctrl->num_bytes <= 20 && sigmadsp->ops && - sigmadsp->ops->safeload) + if (ctrl->num_bytes <= 20 && sigmadsp->ops && sigmadsp->ops->safeload) return sigmadsp->ops->safeload(sigmadsp, ctrl->addr, data, ctrl->num_bytes); else
From: Lei Yang Lei.Yang@windriver.com
[ Upstream commit 53cf59d6c0ad3edc4f4449098706a8f8986258b6 ]
add config file
Signed-off-by: Lei Yang Lei.Yang@windriver.com Signed-off-by: Shuah Khan (Samsung OSG) shuah@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- tools/testing/selftests/efivarfs/config | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/efivarfs/config
diff --git a/tools/testing/selftests/efivarfs/config b/tools/testing/selftests/efivarfs/config new file mode 100644 index 000000000000..4e151f1005b2 --- /dev/null +++ b/tools/testing/selftests/efivarfs/config @@ -0,0 +1 @@ +CONFIG_EFIVAR_FS=y
From: Tony Lindgren tony@atomide.com
[ Upstream commit 10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 ]
It currently only works if the parent bus uses "simple-bus". We currently try to probe children with non-existing compatible values. And we're missing .probe.
I noticed this while testing devices configured to probe using ti-sysc interconnect target module driver. For that we also may want to rebind the driver, so let's remove __init and __exit.
Signed-off-by: Tony Lindgren tony@atomide.com Acked-by: Roger Quadros rogerq@ti.com Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/mfd/omap-usb-host.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1d924d1533c0..b9dc2fcd8f26 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -548,8 +548,8 @@ static int usbhs_omap_get_dt_pdata(struct device *dev, }
static const struct of_device_id usbhs_child_match_table[] = { - { .compatible = "ti,omap-ehci", }, - { .compatible = "ti,omap-ohci", }, + { .compatible = "ti,ehci-omap", }, + { .compatible = "ti,ohci-omap3", }, { } };
@@ -875,6 +875,7 @@ static struct platform_driver usbhs_omap_driver = { .pm = &usbhsomap_dev_pm_ops, .of_match_table = usbhs_omap_dt_ids, }, + .probe = usbhs_omap_probe, .remove = usbhs_omap_remove, };
@@ -884,9 +885,9 @@ MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
-static int __init omap_usbhs_drvinit(void) +static int omap_usbhs_drvinit(void) { - return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); + return platform_driver_register(&usbhs_omap_driver); }
/* @@ -898,7 +899,7 @@ static int __init omap_usbhs_drvinit(void) */ fs_initcall_sync(omap_usbhs_drvinit);
-static void __exit omap_usbhs_drvexit(void) +static void omap_usbhs_drvexit(void) { platform_driver_unregister(&usbhs_omap_driver); }
From: Yu Zhao yuzhao@google.com
[ Upstream commit b61749a89f826eb61fc59794d9e4697bd246eb61 ]
In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in.
Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization.
Reviewed-by: Takashi Iwai tiwai@suse.de Signed-off-by: Yu Zhao yuzhao@google.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/hda/hdac_controller.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index b5a17cb510a0..4727f5b80e76 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -40,6 +40,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus) */ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) { + WARN_ON_ONCE(!bus->rb.area); + spin_lock_irq(&bus->reg_lock); /* CORB set up */ bus->corb.addr = bus->rb.addr; @@ -377,13 +379,15 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) /* reset controller */ azx_reset(bus, full_reset);
- /* initialize interrupts */ + /* clear interrupts */ azx_int_clear(bus); - azx_int_enable(bus);
/* initialize the codec command I/O */ snd_hdac_bus_init_cmd_io(bus);
+ /* enable interrupts after CORB/RIRB buffers are initialized above */ + azx_int_enable(bus); + /* program the position buffer */ if (bus->use_posbuf && bus->posbuf.addr) { snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr);
From: Jongsung Kim neidhard.kim@lge.com
[ Upstream commit edf2ef7242805e53ec2e0841db26e06d8bc7da70 ]
Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition.
Signed-off-by: Jongsung Kim neidhard.kim@lge.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index d02691ba3d7f..20aa34f45f07 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -71,7 +71,7 @@ static int dwmac1000_validate_mcast_bins(int mcast_bins) * Description: * This function validates the number of Unicast address entries supported * by a particular Synopsys 10/100/1000 controller. The Synopsys controller - * supports 1, 32, 64, or 128 Unicast filter entries for it's Unicast filter + * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter * logic. This function validates a valid, supported configuration is * selected, and defaults to 1 Unicast address if an unsupported * configuration is selected. @@ -81,8 +81,7 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) int x = ucast_entries;
switch (x) { - case 1: - case 32: + case 1 ... 32: case 64: case 128: break;
From: Nicolas Ferre nicolas.ferre@microchip.com
[ Upstream commit eb4ed8e2d7fecb5f40db38e4498b9ee23cddf196 ]
Create a new configuration for the sama5d3-macb new compatibility string. This configuration disables scatter-gather because we experienced lock down of the macb interface of this particular SoC under very high load.
Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/net/ethernet/cadence/macb.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 8d54e7b41bbf..4dabbe44008e 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2743,6 +2743,13 @@ static const struct macb_config at91sam9260_config = { .init = macb_init, };
+static const struct macb_config sama5d3macb_config = { + .caps = MACB_CAPS_SG_DISABLED + | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII, + .clk_init = macb_clk_init, + .init = macb_init, +}; + static const struct macb_config pc302gem_config = { .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE, .dma_burst_length = 16, @@ -2801,6 +2808,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,gem", .data = &pc302gem_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config }, + { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config }, { .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config }, { .compatible = "cdns,at91rm9200-emac", .data = &emac_config }, { .compatible = "cdns,emac", .data = &emac_config },
From: Nicolas Ferre nicolas.ferre@microchip.com
[ Upstream commit 321cc359d899a8e988f3725d87c18a628e1cc624 ]
We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- Documentation/devicetree/bindings/net/macb.txt | 1 + arch/arm/boot/dts/sama5d3_emac.dtsi | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index b5d79761ac97..410c044166e2 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -8,6 +8,7 @@ Required properties: Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. + Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi index 7cb235ef0fb6..6e9e1c2f9def 100644 --- a/arch/arm/boot/dts/sama5d3_emac.dtsi +++ b/arch/arm/boot/dts/sama5d3_emac.dtsi @@ -41,7 +41,7 @@ };
macb1: ethernet@f802c000 { - compatible = "cdns,at91sam9260-macb", "cdns,macb"; + compatible = "atmel,sama5d3-macb", "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default";
From: Andy Whitcroft apw@canonical.com
[ Upstream commit 65eea8edc315589d6c993cf12dbb5d0e9ef1fe4e ]
The final field of a floppy_struct is the field "name", which is a pointer to a string in kernel memory. The kernel pointer should not be copied to user memory. The FDGETPRM ioctl copies a floppy_struct to user memory, including this "name" field. This pointer cannot be used by the user and it will leak a kernel address to user-space, which will reveal the location of kernel code and data and undermine KASLR protection.
Model this code after the compat ioctl which copies the returned data to a previously cleared temporary structure on the stack (excluding the name pointer) and copy out to userspace from there. As we already have an inparam union with an appropriate member and that memory is already cleared even for read only calls make use of that as a temporary store.
Based on an initial patch by Brian Belleville.
CVE-2018-7755 Signed-off-by: Andy Whitcroft apw@canonical.com
Broke up long line.
Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/block/floppy.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 331363e7de0f..2daa5b84abbc 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3459,6 +3459,9 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int (struct floppy_struct **)&outparam); if (ret) return ret; + memcpy(&inparam.g, outparam, + offsetof(struct floppy_struct, name)); + outparam = &inparam.g; break; case FDMSGON: UDP->flags |= FTD_MSG;
From: Amber Lin Amber.Lin@amd.com
[ Upstream commit caaa4c8a6be2a275bd14f2369ee364978ff74704 ]
A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit.
Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Amber Lin Amber.Lin@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c index b233cf8436b0..2e1e84c98034 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c @@ -504,7 +504,7 @@ static int kgd_hqd_sdma_destroy(struct kgd_dev *kgd, void *mqd,
while (true) { temp = RREG32(sdma_base_addr + mmSDMA0_RLC0_CONTEXT_STATUS); - if (temp & SDMA0_STATUS_REG__RB_CMD_IDLE__SHIFT) + if (temp & SDMA0_RLC0_CONTEXT_STATUS__IDLE_MASK) break; if (timeout == 0) return -ETIME;
From: Richard Weinberger richard@nod.at
[ Upstream commit 37f31b6ca4311b94d985fb398a72e5399ad57925 ]
The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition.
Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- fs/ubifs/super.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 0bb6de356451..7968b7a5e787 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1918,6 +1918,9 @@ static struct ubi_volume_desc *open_ubi(const char *name, int mode) int dev, vol; char *endptr;
+ if (!name || !*name) + return ERR_PTR(-EINVAL); + /* First, try to open using the device node path method */ ubi = ubi_open_volume_path(name, mode); if (!IS_ERR(ubi))
linux-stable-mirror@lists.linaro.org
-
Sasha Levin