From: Jarod Wilson jarod@redhat.com

[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ]

Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface.

Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types.

Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh j.vosburgh@gmail.com CC: Veaceslav Falico vfalico@gmail.com CC: Andy Gospodarek andy@greyhouse.net CC: "David S. Miller" davem@davemloft.net CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh jay.vosburgh@canonical.com Signed-off-by: Jarod Wilson jarod@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/bonding/bond_main.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4132,13 +4132,23 @@ static netdev_tx_t bond_start_xmit(struc return ret; }

+static u32 bond_mode_bcast_speed(struct slave *slave, u32 speed) +{ + if (speed == 0 || speed == SPEED_UNKNOWN) + speed = slave->speed; + else + speed = min(speed, slave->speed); + + return speed; +} + static int bond_ethtool_get_settings(struct net_device *bond_dev, struct ethtool_cmd *ecmd) { struct bonding *bond = netdev_priv(bond_dev); - unsigned long speed = 0; struct list_head *iter; struct slave *slave; + u32 speed = 0;

ecmd->duplex = DUPLEX_UNKNOWN; ecmd->port = PORT_OTHER; @@ -4150,8 +4160,13 @@ static int bond_ethtool_get_settings(str */ bond_for_each_slave(bond, slave, iter) { if (bond_slave_can_tx(slave)) { - if (slave->speed != SPEED_UNKNOWN) - speed += slave->speed; + if (slave->speed != SPEED_UNKNOWN) { + if (BOND_MODE(bond) == BOND_MODE_BROADCAST) + speed = bond_mode_bcast_speed(slave, + speed); + else + speed += slave->speed; + } if (ecmd->duplex == DUPLEX_UNKNOWN && slave->duplex != DUPLEX_UNKNOWN) ecmd->duplex = slave->duplex;

From: Cong Wang xiyou.wangcong@gmail.com

[ Upstream commit 47733f9daf4fe4f7e0eb9e273f21ad3a19130487 ]

__tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit().

tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path.

Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit().

This bug exists since day 1, but the recent commit 6ea67769ff33 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear.

Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy jmaloy@redhat.com Cc: Ying Xue ying.xue@windriver.com Cc: Richard Alpe richard.alpe@ericsson.com Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Acked-by: Ying Xue ying.xue@windriver.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/tipc/netlink_compat.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -250,8 +250,9 @@ err_out: static int tipc_nl_compat_dumpit(struct tipc_nl_compat_cmd_dump *cmd, struct tipc_nl_compat_msg *msg) { - int err; + struct nlmsghdr *nlh; struct sk_buff *arg; + int err;

if (msg->req_type && (!msg->req_size || !TLV_CHECK_TYPE(msg->req, msg->req_type))) @@ -280,6 +281,15 @@ static int tipc_nl_compat_dumpit(struct return -ENOMEM; }

+ nlh = nlmsg_put(arg, 0, 0, tipc_genl_family.id, 0, NLM_F_MULTI); + if (!nlh) { + kfree_skb(arg); + kfree_skb(msg->rep); + msg->rep = NULL; + return -EMSGSIZE; + } + nlmsg_end(arg, nlh); + err = __tipc_nl_compat_dumpit(cmd, msg, arg); if (err) { kfree_skb(msg->rep);

From: Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz

[ Upstream commit 272502fcb7cda01ab07fc2fcff82d1d2f73d43cc ]

When receiving an IPv4 packet inside an IPv6 GRE packet, and the IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would get corrupted. This is due to the common ip6_tnl_rcv() function assuming that the inner header is always IPv6. This patch checks the tunnel protocol for IPv4 inner packets, but still defaults to IPv6.

Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Mark Tomlinson mark.tomlinson@alliedtelesis.co.nz Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/ip6_tunnel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -871,7 +871,15 @@ int ip6_tnl_rcv(struct ip6_tnl *t, struc struct metadata_dst *tun_dst, bool log_ecn_err) { - return __ip6_tnl_rcv(t, skb, tpi, NULL, ip6ip6_dscp_ecn_decapsulate, + int (*dscp_ecn_decapsulate)(const struct ip6_tnl *t, + const struct ipv6hdr *ipv6h, + struct sk_buff *skb); + + dscp_ecn_decapsulate = ip6ip6_dscp_ecn_decapsulate; + if (tpi->proto == htons(ETH_P_IP)) + dscp_ecn_decapsulate = ip4ip6_dscp_ecn_decapsulate; + + return __ip6_tnl_rcv(t, skb, tpi, NULL, dscp_ecn_decapsulate, log_ecn_err); } EXPORT_SYMBOL(ip6_tnl_rcv);

From: Qiushi Wu wu000273@umn.edu

[ Upstream commit deca195383a6085be62cb453079e03e04d618d6e ]

Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Qiushi Wu wu000273@umn.edu Reviewed-by: Jon Hunter jonathanh@nvidia.com Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/tegra/tegra30_ahub.c | 4 +++- sound/soc/tegra/tegra30_i2s.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c index fef3b9a21a667..e441e23a37e4f 100644 --- a/sound/soc/tegra/tegra30_ahub.c +++ b/sound/soc/tegra/tegra30_ahub.c @@ -656,8 +656,10 @@ static int tegra30_ahub_resume(struct device *dev) int ret;

ret = pm_runtime_get_sync(dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(dev); return ret; + } ret = regcache_sync(ahub->regmap_ahub); ret |= regcache_sync(ahub->regmap_apbif); pm_runtime_put(dev); diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c index 8e55583aa104e..516f37896092c 100644 --- a/sound/soc/tegra/tegra30_i2s.c +++ b/sound/soc/tegra/tegra30_i2s.c @@ -552,8 +552,10 @@ static int tegra30_i2s_resume(struct device *dev) int ret;

ret = pm_runtime_get_sync(dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(dev); return ret; + } ret = regcache_sync(i2s->regmap); pm_runtime_put(dev);

From: Jia-Ju Bai baijiaju@tsinghua.edu.cn

[ Upstream commit 6499a0db9b0f1e903d52f8244eacc1d4be00eea2 ]

The value av7110->debi_virt is stored in DMA memory, and it is assigned to data, and thus data[0] can be modified at any time by malicious hardware. In this case, "if (data[0] < 2)" can be passed, but then data[0] can be changed into a large number, which may cause buffer overflow when the code "av7110->ci_slot[data[0]]" is used.

To fix this possible bug, data[0] is assigned to a local variable, which replaces the use of data[0].

Signed-off-by: Jia-Ju Bai baijiaju@tsinghua.edu.cn Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/ttpci/av7110.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/ttpci/av7110.c b/drivers/media/pci/ttpci/av7110.c index 382caf200ba16..c313f51688f44 100644 --- a/drivers/media/pci/ttpci/av7110.c +++ b/drivers/media/pci/ttpci/av7110.c @@ -426,14 +426,15 @@ static void debiirq(unsigned long cookie) case DATA_CI_GET: { u8 *data = av7110->debi_virt; + u8 data_0 = data[0];

- if ((data[0] < 2) && data[2] == 0xff) { + if (data_0 < 2 && data[2] == 0xff) { int flags = 0; if (data[5] > 0) flags |= CA_CI_MODULE_PRESENT; if (data[5] > 5) flags |= CA_CI_MODULE_READY; - av7110->ci_slot[data[0]].flags = flags; + av7110->ci_slot[data_0].flags = flags; } else ci_get_data(&av7110->ci_rbuffer, av7110->debi_virt,

From: Robin Murphy robin.murphy@arm.com

[ Upstream commit d3e3d2be688b4b5864538de61e750721a311e4fc ]

Unlike the other instances which represent a complete loss of consistency within the rcache mechanism itself, or a fundamental and obvious misconfiguration by an IOMMU driver, the BUG_ON() in iova_magazine_free_pfns() can be provoked at more or less any time in a "spooky action-at-a-distance" manner by any old device driver passing nonsense to dma_unmap_*() which then propagates through to queue_iova().

Not only is this well outside the IOVA layer's control, it's also nowhere near fatal enough to justify panicking anyway - all that really achieves is to make debugging the offending driver more difficult. Let's simply WARN and otherwise ignore bogus PFNs.

Reported-by: Prakash Gupta guptap@codeaurora.org Signed-off-by: Robin Murphy robin.murphy@arm.com Reviewed-by: Prakash Gupta guptap@codeaurora.org Link: https://lore.kernel.org/r/acbd2d092b42738a03a21b417ce64e27f8c91c86.159110329... Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iova.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index f106fd9782bfb..99c36a5438a75 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -676,7 +676,9 @@ iova_magazine_free_pfns(struct iova_magazine *mag, struct iova_domain *iovad) for (i = 0 ; i < mag->size; ++i) { struct iova *iova = private_find_iova(iovad, mag->pfns[i]);

- BUG_ON(!iova); + if (WARN_ON(!iova)) + continue; + private_free_iova(iovad, iova); }

From: Aditya Pakki pakki001@umn.edu

[ Upstream commit 6f2e8acdb48ed166b65d47837c31b177460491ec ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

Signed-off-by: Aditya Pakki pakki001@umn.edu Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/radeon/radeon_connectors.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index efa875120071a..9e6c2be0cc7d4 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -892,8 +892,10 @@ radeon_lvds_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

if (encoder) { @@ -1038,8 +1040,10 @@ radeon_vga_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

encoder = radeon_best_single_encoder(connector); @@ -1176,8 +1180,10 @@ radeon_tv_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

encoder = radeon_best_single_encoder(connector); @@ -1260,8 +1266,10 @@ radeon_dvi_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

if (radeon_connector->detected_hpd_without_ddc) { @@ -1701,8 +1709,10 @@ radeon_dp_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

if (!force && radeon_check_hpd_status_unchanged(connector)) {

From: Navid Emamdoost navid.emamdoost@gmail.com

[ Upstream commit 5509ac65f2fe5aa3c0003237ec629ca55024307c ]

in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index e0890deccb2fe..7cae10fec78de 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -633,11 +633,12 @@ long amdgpu_drm_ioctl(struct file *filp, dev = file_priv->minor->dev; ret = pm_runtime_get_sync(dev->dev); if (ret < 0) - return ret; + goto out;

ret = drm_ioctl(filp, cmd, arg);

pm_runtime_mark_last_busy(dev->dev); +out: pm_runtime_put_autosuspend(dev->dev); return ret; }

From: Navid Emamdoost navid.emamdoost@gmail.com

[ Upstream commit f79f94765f8c39db0b7dec1d335ab046aac03f20 ]

The call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index e9311eb7b8d9f..694f631d9c90d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -734,8 +734,10 @@ amdgpu_connector_lvds_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

if (encoder) { @@ -872,8 +874,10 @@ amdgpu_connector_vga_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

encoder = amdgpu_connector_best_single_encoder(connector); @@ -996,8 +1000,10 @@ amdgpu_connector_dvi_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

if (!force && amdgpu_connector_check_hpd_status_unchanged(connector)) { @@ -1371,8 +1377,10 @@ amdgpu_connector_dp_detect(struct drm_connector *connector, bool force)

if (!drm_kms_helper_is_poll_worker()) { r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) + if (r < 0) { + pm_runtime_put_autosuspend(connector->dev->dev); return connector_status_disconnected; + } }

if (!force && amdgpu_connector_check_hpd_status_unchanged(connector)) {

From: Desnes A. Nunes do Rosario desnesn@linux.ibm.com

[ Upstream commit 3337bf41e0dd70b4064cdf60acdfcdc2d050066c ]

An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per- formed when count_pmc() is used to reset PMCs on a few selftests. This extra pmc_count can occasionally invalidate results, such as the ones from cycles_test shown hereafter. The ebb_check_count() failed with an above the upper limit error due to the extra value on ebb_state.stats.pmc_count.

Furthermore, this extra count is also indicated by extra PMC1 trace_log on the output of the cycle test (as well as on pmc56_overflow_test):

========== ... [21]: counter = 8 [22]: register SPRN_MMCR0 = 0x0000000080000080 [23]: register SPRN_PMC1 = 0x0000000080000004 [24]: counter = 9 [25]: register SPRN_MMCR0 = 0x0000000080000080 [26]: register SPRN_PMC1 = 0x0000000080000004 [27]: counter = 10 [28]: register SPRN_MMCR0 = 0x0000000080000080 [29]: register SPRN_PMC1 = 0x0000000080000004

...

[30]: register SPRN_PMC1 = 0x000000004000051e

PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e) [FAIL] Test FAILED on line 52 failure: cycles ==========

Signed-off-by: Desnes A. Nunes do Rosario desnesn@linux.ibm.com Tested-by: Sachin Sant sachinp@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c | 2 -- tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c | 2 -- .../selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c | 2 -- .../selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c | 2 -- tools/testing/selftests/powerpc/pmu/ebb/ebb.c | 2 -- .../selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c | 2 -- .../selftests/powerpc/pmu/ebb/lost_exception_test.c | 1 - .../testing/selftests/powerpc/pmu/ebb/multi_counter_test.c | 7 ------- .../selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c | 2 -- .../testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c | 2 -- .../selftests/powerpc/pmu/ebb/pmc56_overflow_test.c | 2 -- 11 files changed, 26 deletions(-)

diff --git a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c index 94110b1dcd3d8..031baa43646fb 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c @@ -91,8 +91,6 @@ int back_to_back_ebbs(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

event_close(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c index 7c57a8d79535d..361e0be9df9ae 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c @@ -42,8 +42,6 @@ int cycles(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

event_close(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c index ecf5ee3283a3e..fe7d0dc2a1a26 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c @@ -99,8 +99,6 @@ int cycles_with_freeze(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

printf("EBBs while frozen %d\n", ebbs_while_frozen); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c index c0faba520b35c..b9b30f974b5ea 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c @@ -71,8 +71,6 @@ int cycles_with_mmcr2(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

event_close(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c index 46681fec549b8..2694ae161a84a 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c @@ -396,8 +396,6 @@ int ebb_child(union pipe read_pipe, union pipe write_pipe) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

event_close(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c index a991d2ea8d0a1..174e4f4dae6c0 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c @@ -38,8 +38,6 @@ static int victim_child(union pipe read_pipe, union pipe write_pipe) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

FAIL_IF(ebb_state.stats.ebb_count == 0); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c index eb8acb78bc6c1..531083accfcad 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c @@ -75,7 +75,6 @@ static int test_body(void) ebb_freeze_pmcs(); ebb_global_disable();

- count_pmc(4, sample_period); mtspr(SPRN_PMC4, 0xdead);

dump_summary_ebb_state(); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c index 6ff8c8ff27d66..035c02273cd49 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c @@ -70,13 +70,6 @@ int multi_counter(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - count_pmc(2, sample_period); - count_pmc(3, sample_period); - count_pmc(4, sample_period); - count_pmc(5, sample_period); - count_pmc(6, sample_period); - dump_ebb_state();

for (i = 0; i < 6; i++) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c index 037cb6154f360..3e9d4ac965c85 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c @@ -61,8 +61,6 @@ static int cycles_child(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_summary_ebb_state();

event_close(&event); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c index c5fa64790c22e..d90891fe96a32 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c @@ -82,8 +82,6 @@ static int test_body(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(1, sample_period); - dump_ebb_state();

if (mmcr0_mismatch) diff --git a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c index 30e1ac62e8cb4..8ca92b9ee5b01 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c @@ -76,8 +76,6 @@ int pmc56_overflow(void) ebb_global_disable(); ebb_freeze_pmcs();

- count_pmc(2, sample_period); - dump_ebb_state();

printf("PMC5/6 overflow %d\n", pmc56_overflowed);

From: Qiushi Wu wu000273@umn.edu

[ Upstream commit 8a94644b440eef5a7b9c104ac8aa7a7f413e35e5 ]

kobject_init_and_add() takes a reference even when it fails. If it returns an error, kobject_put() must be called to clean up the memory associated with the object.

When kobject_init_and_add() fails, call kobject_put() instead of kfree().

b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") fixed a similar problem.

Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/slot.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 429d34c348b9f..01a343ad7155c 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -303,13 +303,16 @@ placeholder: slot_name = make_slot_name(name); if (!slot_name) { err = -ENOMEM; + kfree(slot); goto err; }

err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL, "%s", slot_name); - if (err) + if (err) { + kobject_put(&slot->kobj); goto err; + }

INIT_LIST_HEAD(&slot->list); list_add(&slot->list, &parent->slots); @@ -328,7 +331,6 @@ out: mutex_unlock(&pci_slot_mutex); return slot; err: - kfree(slot); slot = ERR_PTR(err); goto out; }

From: Peng Fan fanpeng@loongson.cn

[ Upstream commit a859647b4e6bfeb192284d27d24b6a0c914cae1d ]

Close "fd" before the return of map_vdso() and close "out_file" in main().

Signed-off-by: Peng Fan fanpeng@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/vdso/genvdso.c | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/arch/mips/vdso/genvdso.c b/arch/mips/vdso/genvdso.c index 530a36f465ced..afcc86726448e 100644 --- a/arch/mips/vdso/genvdso.c +++ b/arch/mips/vdso/genvdso.c @@ -126,6 +126,7 @@ static void *map_vdso(const char *path, size_t *_size) if (fstat(fd, &stat) != 0) { fprintf(stderr, "%s: Failed to stat '%s': %s\n", program_name, path, strerror(errno)); + close(fd); return NULL; }

@@ -134,6 +135,7 @@ static void *map_vdso(const char *path, size_t *_size) if (addr == MAP_FAILED) { fprintf(stderr, "%s: Failed to map '%s': %s\n", program_name, path, strerror(errno)); + close(fd); return NULL; }

@@ -143,6 +145,7 @@ static void *map_vdso(const char *path, size_t *_size) if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0) { fprintf(stderr, "%s: '%s' is not an ELF file\n", program_name, path); + close(fd); return NULL; }

@@ -154,6 +157,7 @@ static void *map_vdso(const char *path, size_t *_size) default: fprintf(stderr, "%s: '%s' has invalid ELF class\n", program_name, path); + close(fd); return NULL; }

@@ -165,6 +169,7 @@ static void *map_vdso(const char *path, size_t *_size) default: fprintf(stderr, "%s: '%s' has invalid ELF data order\n", program_name, path); + close(fd); return NULL; }

@@ -172,15 +177,18 @@ static void *map_vdso(const char *path, size_t *_size) fprintf(stderr, "%s: '%s' has invalid ELF machine (expected EM_MIPS)\n", program_name, path); + close(fd); return NULL; } else if (swap_uint16(ehdr->e_type) != ET_DYN) { fprintf(stderr, "%s: '%s' has invalid ELF type (expected ET_DYN)\n", program_name, path); + close(fd); return NULL; }

*_size = stat.st_size; + close(fd); return addr; }

@@ -284,10 +292,12 @@ int main(int argc, char **argv) /* Calculate and write symbol offsets to <output file> */ if (!get_symbols(dbg_vdso_path, dbg_vdso)) { unlink(out_path); + fclose(out_file); return EXIT_FAILURE; }

fprintf(out_file, "};\n"); + fclose(out_file);

return EXIT_SUCCESS; }

From: Aditya Pakki pakki001@umn.edu

[ Upstream commit bfad51c7633325b5d4b32444efe04329d53297b2 ]

nouveau_fbcon_open() calls calls pm_runtime_get_sync() that increments the reference count. In case of failure, decrement the ref count before returning the error.

Signed-off-by: Aditya Pakki pakki001@umn.edu Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 275abc424ce25..40da9143f7220 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -183,8 +183,10 @@ nouveau_fbcon_open(struct fb_info *info, int user) struct nouveau_fbdev *fbcon = info->par; struct nouveau_drm *drm = nouveau_drm(fbcon->dev); int ret = pm_runtime_get_sync(drm->dev->dev); - if (ret < 0 && ret != -EACCES) + if (ret < 0 && ret != -EACCES) { + pm_runtime_put(drm->dev->dev); return ret; + } return 0; }

From: Chris Wilson chris@chris-wilson.co.uk

[ Upstream commit a7ef9b28aa8d72a1656fa6f0a01bbd1493886317 ]

Though the number of lock-acquisitions is tracked as unsigned long, this is passed as the divisor to div_s64() which interprets it as a s32, giving nonsense values with more than 2 billion acquisitons. E.g.

acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg ------------------------------------------------------------------------- 2350439395 0.07 353.38 649647067.36 0.-32

Signed-off-by: Chris Wilson chris@chris-wilson.co.uk Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: https://lore.kernel.org/r/20200725185110.11588-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/locking/lockdep_proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/locking/lockdep_proc.c b/kernel/locking/lockdep_proc.c index 75d80809c48c9..09bad6cbb95cf 100644 --- a/kernel/locking/lockdep_proc.c +++ b/kernel/locking/lockdep_proc.c @@ -425,7 +425,7 @@ static void seq_lock_time(struct seq_file *m, struct lock_time *lt) seq_time(m, lt->min); seq_time(m, lt->max); seq_time(m, lt->total); - seq_time(m, lt->nr ? div_s64(lt->total, lt->nr) : 0); + seq_time(m, lt->nr ? div64_u64(lt->total, lt->nr) : 0); }

static void seq_stats(struct seq_file *m, struct lock_stat_data *data)

From: Xiubo Li xiubli@redhat.com

[ Upstream commit fa9967734227b44acb1b6918033f9122dc7825b9 ]

Make sure the delayed work stopped before releasing the resources.

cancel_delayed_work_sync() will only guarantee that the work finishes executing if the work is already in the ->worklist. That means after the cancel_delayed_work_sync() returns, it will leave the work requeued if it was rearmed at the end. That can lead to a use after free once the work struct is freed.

Fix it by flushing the delayed work instead of trying to cancel it, and ensure that the work doesn't rearm if the mdsc is stopping.

URL: https://tracker.ceph.com/issues/46293 Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/mds_client.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 3139fbd4c34e3..4ec5a109df82b 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -3386,6 +3386,9 @@ static void delayed_work(struct work_struct *work) dout("mdsc delayed_work\n"); ceph_check_delayed_caps(mdsc);

+ if (mdsc->stopping) + return; + mutex_lock(&mdsc->mutex); renew_interval = mdsc->mdsmap->m_session_timeout >> 2; renew_caps = time_after_eq(jiffies, HZ*renew_interval + @@ -3717,7 +3720,16 @@ void ceph_mdsc_force_umount(struct ceph_mds_client *mdsc) static void ceph_mdsc_stop(struct ceph_mds_client *mdsc) { dout("stop\n"); - cancel_delayed_work_sync(&mdsc->delayed_work); /* cancel timer */ + /* + * Make sure the delayed work stopped before releasing + * the resources. + * + * Because the cancel_delayed_work_sync() will only + * guarantee that the work finishes executing. But the + * delayed work will re-arm itself again after that. + */ + flush_delayed_work(&mdsc->delayed_work); + if (mdsc->mdsmap) ceph_mdsmap_destroy(mdsc->mdsmap); kfree(mdsc->sessions);

From: Jason Baron jbaron@akamai.com

[ Upstream commit 709ed1bcef12398ac1a35c149f3e582db04456c2 ]

The Intel uncore driver may claim some of the pci ids from ie31200 which means that the ie31200 edac driver will not initialize them as part of pci_register_driver().

Let's add a fallback for this case to 'pci_get_device()' to get a reference on the device such that it can still be configured. This is similar in approach to other edac drivers.

Signed-off-by: Jason Baron jbaron@akamai.com Cc: Borislav Petkov bp@suse.de Cc: Mauro Carvalho Chehab mchehab@kernel.org Cc: linux-edac linux-edac@vger.kernel.org Signed-off-by: Tony Luck tony.luck@intel.com Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.co... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/edac/ie31200_edac.c | 50 ++++++++++++++++++++++++++++++++++--- 1 file changed, 47 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/ie31200_edac.c b/drivers/edac/ie31200_edac.c index 1c88d97074951..3438b98e60948 100644 --- a/drivers/edac/ie31200_edac.c +++ b/drivers/edac/ie31200_edac.c @@ -145,6 +145,8 @@ (n << (28 + (2 * skl) - PAGE_SHIFT))

static int nr_channels; +static struct pci_dev *mci_pdev; +static int ie31200_registered = 1;

struct ie31200_priv { void __iomem *window; @@ -512,12 +514,16 @@ fail_free: static int ie31200_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - edac_dbg(0, "MC:\n"); + int rc;

+ edac_dbg(0, "MC:\n"); if (pci_enable_device(pdev) < 0) return -EIO; + rc = ie31200_probe1(pdev, ent->driver_data); + if (rc == 0 && !mci_pdev) + mci_pdev = pci_dev_get(pdev);

- return ie31200_probe1(pdev, ent->driver_data); + return rc; }

static void ie31200_remove_one(struct pci_dev *pdev) @@ -526,6 +532,8 @@ static void ie31200_remove_one(struct pci_dev *pdev) struct ie31200_priv *priv;

edac_dbg(0, "\n"); + pci_dev_put(mci_pdev); + mci_pdev = NULL; mci = edac_mc_del_mc(&pdev->dev); if (!mci) return; @@ -574,17 +582,53 @@ static struct pci_driver ie31200_driver = {

static int __init ie31200_init(void) { + int pci_rc, i; + edac_dbg(3, "MC:\n"); /* Ensure that the OPSTATE is set correctly for POLL or NMI */ opstate_init();

- return pci_register_driver(&ie31200_driver); + pci_rc = pci_register_driver(&ie31200_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + ie31200_registered = 0; + for (i = 0; ie31200_pci_tbl[i].vendor != 0; i++) { + mci_pdev = pci_get_device(ie31200_pci_tbl[i].vendor, + ie31200_pci_tbl[i].device, + NULL); + if (mci_pdev) + break; + } + if (!mci_pdev) { + edac_dbg(0, "ie31200 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + pci_rc = ie31200_init_one(mci_pdev, &ie31200_pci_tbl[i]); + if (pci_rc < 0) { + edac_dbg(0, "ie31200 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + return 0; + +fail1: + pci_unregister_driver(&ie31200_driver); +fail0: + pci_dev_put(mci_pdev); + + return pci_rc; }

static void __exit ie31200_exit(void) { edac_dbg(3, "MC:\n"); pci_unregister_driver(&ie31200_driver); + if (!ie31200_registered) + ie31200_remove_one(mci_pdev); }

module_init(ie31200_init);

From: David Brazdil dbrazdil@google.com

[ Upstream commit b38b298aa4397e2dc74a89b4dd3eac9e59b64c96 ]

__hyp_call_panic_nvhe contains inline assembly which did not declare its dependency on the __hyp_panic_string symbol.

The static-declared string has previously been kept alive because of a use in __hyp_call_panic_vhe. Fix this in preparation for separating the source files between VHE and nVHE when the two users land in two different compilation units. The static variable otherwise gets dropped when compiling the nVHE source file, causing an undefined symbol linker error later.

Signed-off-by: David Brazdil dbrazdil@google.com Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20200625131420.71444-2-dbrazdil@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kvm/hyp/switch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index 115b0955715f3..ed7e3a288b4e5 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -412,7 +412,7 @@ static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par, * making sure it is a kernel address and not a PC-relative * reference. */ - asm volatile("ldr %0, =__hyp_panic_string" : "=r" (str_va)); + asm volatile("ldr %0, =%1" : "=r" (str_va) : "S" (__hyp_panic_string));

__hyp_do_panic(str_va, spsr, elr,

From: Changming Liu charley.ashbringer@gmail.com

[ Upstream commit 2b53a19284f537168fb506f2f40d7fda40a01162 ]

The char buffer buf, receives data directly from user space, so its content might be negative and its elements are left shifted to form an unsigned integer.

Since left shifting a negative value is undefined behavior, thus change the char to u8 to elimintate this UB.

Signed-off-by: Changming Liu charley.ashbringer@gmail.com Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/misc/sisusbvga/sisusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 895e8c0288cf9..30b3bdc4e6761 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -762,7 +762,7 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, u8 swap8, fromkern = kernbuffer ? 1 : 0; u16 swap16; u32 swap32, flag = (length >> 28) & 1; - char buf[4]; + u8 buf[4];

/* if neither kernbuffer not userbuffer are given, assume * data in obuf

From: Zhi Chen zhichen@codeaurora.org

[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ]

This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs.

For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved

With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1.

Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040

Signed-off-by: Zhi Chen zhichen@codeaurora.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/hw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 6038b7486f1db..e04e0260035ad 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -558,7 +558,7 @@ ath10k_rx_desc_get_l3_pad_bytes(struct ath10k_hw_params *hw,

#define TARGET_10_4_TX_DBG_LOG_SIZE 1024 #define TARGET_10_4_NUM_WDS_ENTRIES 32 -#define TARGET_10_4_DMA_BURST_SIZE 0 +#define TARGET_10_4_DMA_BURST_SIZE 1 #define TARGET_10_4_MAC_AGGR_DELIM 0 #define TARGET_10_4_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1 #define TARGET_10_4_VOW_CONFIG 0

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 07c8434150f4eb0b65cae288721c8af1080fde17 ]

If a memory allocation fails within a 'usb_ep_alloc_request()' call, the already allocated memory must be released.

Fix a mix-up in the code and free the correct requests.

Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/f_tcm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index d2351139342f6..7e8e262b36297 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -751,12 +751,13 @@ static int uasp_alloc_stream_res(struct f_uas *fu, struct uas_stream *stream) goto err_sts;

return 0; + err_sts: - usb_ep_free_request(fu->ep_status, stream->req_status); - stream->req_status = NULL; -err_out: usb_ep_free_request(fu->ep_out, stream->req_out); stream->req_out = NULL; +err_out: + usb_ep_free_request(fu->ep_in, stream->req_in); + stream->req_in = NULL; out: return -ENOMEM; }

From: zhangyi (F) yi.zhang@huawei.com

[ Upstream commit c044f3d8360d2ecf831ba2cc9f08cf9fb2c699fb ]

If we free a metadata buffer which has been failed to async write out in the background, the jbd2 checkpoint procedure will not detect this failure in jbd2_log_do_checkpoint(), so it may lead to filesystem inconsistency after cleanup journal tail. This patch abort the journal if free a buffer has write_io_error flag to prevent potential further inconsistency.

Signed-off-by: zhangyi (F) yi.zhang@huawei.com Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/transaction.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)

diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index 1478512ecab3e..cfbf5474bccab 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -1990,6 +1990,7 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal, { struct buffer_head *head; struct buffer_head *bh; + bool has_write_io_error = false; int ret = 0;

J_ASSERT(PageLocked(page)); @@ -2014,11 +2015,26 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal, jbd_unlock_bh_state(bh); if (buffer_jbd(bh)) goto busy; + + /* + * If we free a metadata buffer which has been failed to + * write out, the jbd2 checkpoint procedure will not detect + * this failure and may lead to filesystem inconsistency + * after cleanup journal tail. + */ + if (buffer_write_io_error(bh)) { + pr_err("JBD2: Error while async write back metadata bh %llu.", + (unsigned long long)bh->b_blocknr); + has_write_io_error = true; + } } while ((bh = bh->b_this_page) != head);

ret = try_to_free_buffers(page);

busy: + if (has_write_io_error) + jbd2_journal_abort(journal, -EIO); + return ret; }

From: Vineeth Vijayan vneethv@linux.ibm.com

[ Upstream commit 0b8eb2ee9da1e8c9b8082f404f3948aa82a057b2 ]

The scanning through subchannels during the time of an event could take significant amount of time in case of platforms with lots of known subchannels. This might result in higher scheduling latencies for other tasks especially on systems with a single CPU. Add cond_resched() call, as the loop in slow_eval_known_fn() can be executed for a longer duration.

Reviewed-by: Peter Oberparleiter oberpar@linux.ibm.com Signed-off-by: Vineeth Vijayan vneethv@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/css.c | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 39a2b0cde9e42..d81fdcd6a1fe0 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -529,6 +529,11 @@ static int slow_eval_known_fn(struct subchannel *sch, void *data) rc = css_evaluate_known_subchannel(sch, 1); if (rc == -EAGAIN) css_schedule_eval(sch->schid); + /* + * The loop might take long time for platforms with lots of + * known devices. Allow scheduling here. + */ + cond_resched(); } return 0; }

From: Adrian Hunter adrian.hunter@intel.com

[ Upstream commit 127d5f7c4b653b8be5eb3b2c7bbe13728f9003ff ]

For shared interrupts, the interrupt status might be zero, so check that first.

Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com Reviewed-by: Avri Altman avri.altman@wdc.com Signed-off-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 9916c574e8b80..ad5f2e2b4cbaf 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -4400,7 +4400,7 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) */ static irqreturn_t ufshcd_intr(int irq, void *__hba) { - u32 intr_status, enabled_intr_status; + u32 intr_status, enabled_intr_status = 0; irqreturn_t retval = IRQ_NONE; struct ufs_hba *hba = __hba; int retries = hba->nutrs; @@ -4414,7 +4414,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba) * read, make sure we handle them by checking the interrupt status * again in a loop until we process all of the reqs before returning. */ - do { + while (intr_status && retries--) { enabled_intr_status = intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); if (intr_status) @@ -4425,7 +4425,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba) }

intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); - } while (intr_status && --retries); + }

spin_unlock(hba->host->host_lock); return retval;

From: Athira Rajeev atrajeev@linux.vnet.ibm.com

[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]

Performance monitor interrupt handler checks if any counter has overflown and calls record_and_restart() in core-book3s which invokes perf_event_overflow() to record the sample information. Apart from creating sample, perf_event_overflow() also does the interrupt and period checks via perf_event_account_interrupt().

Currently we record information only if the SIAR (Sampled Instruction Address Register) valid bit is set (using siar_valid() check) and hence the interrupt check.

But it is possible that we do sampling for some events that are not generating valid SIAR, and hence there is no chance to disable the event if interrupts are more than max_samples_per_tick. This leads to soft lockup.

Fix this by adding perf_event_account_interrupt() in the invalid SIAR code path for a sampling event. ie if SIAR is invalid, just do interrupt check and don't record the sample information.

Reported-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Athira Rajeev atrajeev@linux.vnet.ibm.com Tested-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vn... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/perf/core-book3s.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index ba49ae6625f1b..a10b67df83bae 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -2042,6 +2042,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,

if (perf_event_overflow(event, &data, regs)) power_pmu_stop(event, 0); + } else if (period) { + /* Account for interrupt in case of invalid SIAR */ + if (perf_event_account_interrupt(event)) + power_pmu_stop(event, 0); } }

From: Filipe Manana fdmanana@suse.com

commit bbc37d6e475eee8ffa2156ec813efc6bbb43c06d upstream.

If a transaction aborts it can cause a memory leak of the pages array of a block group's io_ctl structure. The following steps explain how that can happen:

1) Transaction N is committing, currently in state TRANS_STATE_UNBLOCKED and it's about to start writing out dirty extent buffers;

2) Transaction N + 1 already started and another task, task A, just called btrfs_commit_transaction() on it;

3) Block group B was dirtied (extents allocated from it) by transaction N + 1, so when task A calls btrfs_start_dirty_block_groups(), at the very beginning of the transaction commit, it starts writeback for the block group's space cache by calling btrfs_write_out_cache(), which allocates the pages array for the block group's io_ctl with a call to io_ctl_init(). Block group A is added to the io_list of transaction N + 1 by btrfs_start_dirty_block_groups();

4) While transaction N's commit is writing out the extent buffers, it gets an IO error and aborts transaction N, also setting the file system to RO mode;

5) Task A has already returned from btrfs_start_dirty_block_groups(), is at btrfs_commit_transaction() and has set transaction N + 1 state to TRANS_STATE_COMMIT_START. Immediately after that it checks that the filesystem was turned to RO mode, due to transaction N's abort, and jumps to the "cleanup_transaction" label. After that we end up at btrfs_cleanup_one_transaction() which calls btrfs_cleanup_dirty_bgs(). That helper finds block group B in the transaction's io_list but it never releases the pages array of the block group's io_ctl, resulting in a memory leak.

In fact at the point when we are at btrfs_cleanup_dirty_bgs(), the pages array points to pages that were already released by us at __btrfs_write_out_cache() through the call to io_ctl_drop_pages(). We end up freeing the pages array only after waiting for the ordered extent to complete through btrfs_wait_cache_io(), which calls io_ctl_free() to do that. But in the transaction abort case we don't wait for the space cache's ordered extent to complete through a call to btrfs_wait_cache_io(), so that's why we end up with a memory leak - we wait for the ordered extent to complete indirectly by shutting down the work queues and waiting for any jobs in them to complete before returning from close_ctree().

We can solve the leak simply by freeing the pages array right after releasing the pages (with the call to io_ctl_drop_pages()) at __btrfs_write_out_cache(), since we will never use it anymore after that and the pages array points to already released pages at that point, which is currently not a problem since no one will use it after that, but not a good practice anyway since it can easily lead to use-after-free issues.

So fix this by freeing the pages array right after releasing the pages at __btrfs_write_out_cache().

This issue can often be reproduced with test case generic/475 from fstests and kmemleak can detect it and reports it with the following trace:

unreferenced object 0xffff9bbf009fa600 (size 512): comm "fsstress", pid 38807, jiffies 4298504428 (age 22.028s) hex dump (first 32 bytes): 00 a0 7c 4d 3d ed ff ff 40 a0 7c 4d 3d ed ff ff ..|M=...@.|M=... 80 a0 7c 4d 3d ed ff ff c0 a0 7c 4d 3d ed ff ff ..|M=.....|M=... backtrace: [<00000000f4b5cfe2>] __kmalloc+0x1a8/0x3e0 [<0000000028665e7f>] io_ctl_init+0xa7/0x120 [btrfs] [<00000000a1f95b2d>] __btrfs_write_out_cache+0x86/0x4a0 [btrfs] [<00000000207ea1b0>] btrfs_write_out_cache+0x7f/0xf0 [btrfs] [<00000000af21f534>] btrfs_start_dirty_block_groups+0x27b/0x580 [btrfs] [<00000000c3c23d44>] btrfs_commit_transaction+0xa6f/0xe70 [btrfs] [<000000009588930c>] create_subvol+0x581/0x9a0 [btrfs] [<000000009ef2fd7f>] btrfs_mksubvol+0x3fb/0x4a0 [btrfs] [<00000000474e5187>] __btrfs_ioctl_snap_create+0x119/0x1a0 [btrfs] [<00000000708ee349>] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] [<00000000ea60106f>] btrfs_ioctl+0x12c/0x3130 [btrfs] [<000000005c923d6d>] __x64_sys_ioctl+0x83/0xb0 [<0000000043ace2c9>] do_syscall_64+0x33/0x80 [<00000000904efbce>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Josef Bacik josef@toxicpanda.com Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/disk-io.c | 1 + fs/btrfs/free-space-cache.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)

--- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4432,6 +4432,7 @@ static void btrfs_cleanup_bg_io(struct b cache->io_ctl.inode = NULL; iput(inode); } + ASSERT(cache->io_ctl.pages == NULL); btrfs_put_block_group(cache); }

--- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1165,7 +1165,6 @@ int btrfs_wait_cache_io(struct btrfs_roo ret = update_cache_item(trans, root, inode, path, offset, io_ctl->entries, io_ctl->bitmaps); out: - io_ctl_free(io_ctl); if (ret) { invalidate_inode_pages2(inode->i_mapping); BTRFS_I(inode)->generation = 0; @@ -1314,6 +1313,7 @@ static int __btrfs_write_out_cache(struc * them out later */ io_ctl_drop_pages(io_ctl); + io_ctl_free(io_ctl);

unlock_extent_cached(&BTRFS_I(inode)->io_tree, 0, i_size_read(inode) - 1, &cached_state, GFP_NOFS);

From: Evgeny Novikov novikov@ispras.ru

commit 531412492ce93ea29b9ca3b4eb5e3ed771f851dd upstream.

lvs_rh_probe() can return some nonnegative value from usb_control_msg() when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as a failure. Make lvs_rh_probe() return -EINVAL in this case.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov novikov@ispras.ru Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ru Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/misc/lvstest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/lvstest.c +++ b/drivers/usb/misc/lvstest.c @@ -392,7 +392,7 @@ static int lvs_rh_probe(struct usb_inter USB_DT_SS_HUB_SIZE, USB_CTRL_GET_TIMEOUT); if (ret < (USB_DT_HUB_NONVAR_SIZE + 2)) { dev_err(&hdev->dev, "wrong root hub descriptor read %d\n", ret); - return ret; + return ret < 0 ? ret : -EINVAL; }

/* submit urb to poll interrupt endpoint */

From: George Kennedy george.kennedy@oracle.com

commit bc5269ca765057a1b762e79a1cfd267cd7bf1c46 upstream.

vc_resize() can return with an error after failure. Change VT_RESIZEX ioctl to save struct vc_data values that are modified and restore the original values in case of error.

Signed-off-by: George Kennedy george.kennedy@oracle.com Cc: stable stable@vger.kernel.org Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-2-git-send-email-george.kennedy@or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/vt/vt_ioctl.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -896,12 +896,22 @@ int vt_ioctl(struct tty_struct *tty, console_lock(); vcp = vc_cons[i].d; if (vcp) { + int ret; + int save_scan_lines = vcp->vc_scan_lines; + int save_font_height = vcp->vc_font.height; + if (v.v_vlin) vcp->vc_scan_lines = v.v_vlin; if (v.v_clin) vcp->vc_font.height = v.v_clin; vcp->vc_resize_user = 1; - vc_resize(vcp, v.v_cols, v.v_rows); + ret = vc_resize(vcp, v.v_cols, v.v_rows); + if (ret) { + vcp->vc_scan_lines = save_scan_lines; + vcp->vc_font.height = save_font_height; + console_unlock(); + return ret; + } } console_unlock(); }

From: Lukas Wunner lukas@wunner.de

commit 27afac93e3bd7fa89749cf11da5d86ac9cde4dba upstream.

If probing of a pl011 gets deferred until after free_initmem(), an oops ensues because pl011_console_match() is called which has been freed.

Fix by removing the __init attribute from the function and those it calls.

Commit 10879ae5f12e ("serial: pl011: add console matching function") introduced pl011_console_match() not just for early consoles but regular preferred consoles, such as those added by acpi_parse_spcr(). Regular consoles may be registered after free_initmem() for various reasons, one being deferred probing, another being dynamic enablement of serial ports using a DeviceTree overlay.

Thus, pl011_console_match() must not be declared __init and the functions it calls mustn't either.

Stack trace for posterity:

Unable to handle kernel paging request at virtual address 80c38b58 Internal error: Oops: 8000000d [#1] PREEMPT SMP ARM PC is at pl011_console_match+0x0/0xfc LR is at register_console+0x150/0x468 [<80187004>] (register_console) [<805a8184>] (uart_add_one_port) [<805b2b68>] (pl011_register_port) [<805b3ce4>] (pl011_probe) [<80569214>] (amba_probe) [<805ca088>] (really_probe) [<805ca2ec>] (driver_probe_device) [<805ca5b0>] (__device_attach_driver) [<805c8060>] (bus_for_each_drv) [<805c9dfc>] (__device_attach) [<805ca630>] (device_initial_probe) [<805c90a8>] (bus_probe_device) [<805c95a8>] (deferred_probe_work_func)

Fixes: 10879ae5f12e ("serial: pl011: add console matching function") Signed-off-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v4.10+ Cc: Aleksey Makarov amakarov@marvell.com Cc: Peter Hurley peter@hurleysoftware.com Cc: Russell King linux@armlinux.org.uk Cc: Christopher Covington cov@codeaurora.org Link: https://lore.kernel.org/r/f827ff09da55b8c57d316a1b008a137677b58921.159731555... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/amba-pl011.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2249,9 +2249,8 @@ pl011_console_write(struct console *co, clk_disable(uap->clk); }

-static void __init -pl011_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) +static void pl011_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) { if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, ibrd, fbrd; @@ -2284,7 +2283,7 @@ pl011_console_get_options(struct uart_am } }

-static int __init pl011_console_setup(struct console *co, char *options) +static int pl011_console_setup(struct console *co, char *options) { struct uart_amba_port *uap; int baud = 38400; @@ -2352,8 +2351,8 @@ static int __init pl011_console_setup(st * * Returns 0 if console matches; otherwise non-zero to use default matching */ -static int __init pl011_console_match(struct console *co, char *name, int idx, - char *options) +static int pl011_console_match(struct console *co, char *name, int idx, + char *options) { unsigned char iotype; resource_size_t addr;

From: Sergey Senozhatsky sergey.senozhatsky@gmail.com

commit 205d300aea75623e1ae4aa43e0d265ab9cf195fd upstream.

We have a number of "uart.port->desc.lock vs desc.lock->uart.port" lockdep reports coming from 8250 driver; this causes a bit of trouble to people, so let's fix it.

The problem is reverse lock order in two different call paths:

chain #1:

serial8250_do_startup() spin_lock_irqsave(&port->lock); disable_irq_nosync(port->irq); raw_spin_lock_irqsave(&desc->lock)

chain #2:

__report_bad_irq() raw_spin_lock_irqsave(&desc->lock) for_each_action_of_desc() printk() spin_lock_irqsave(&port->lock);

Fix this by changing the order of locks in serial8250_do_startup(): do disable_irq_nosync() first, which grabs desc->lock, and grab uart->port after that, so that chain #1 and chain #2 have same lock order.

Full lockdep splat:

====================================================== WARNING: possible circular locking dependency detected 5.4.39 #55 Not tainted ======================================================

swapper/0/0 is trying to acquire lock: ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57

but task is already holding lock: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&irq_desc_lock_class){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d __irq_get_desc_lock+0x65/0x89 __disable_irq_nosync+0x3b/0x93 serial8250_do_startup+0x451/0x75c uart_startup+0x1b4/0x2ff uart_port_activate+0x73/0xa0 tty_port_open+0xae/0x10a uart_open+0x1b/0x26 tty_open+0x24d/0x3a0 chrdev_open+0xd5/0x1cc do_dentry_open+0x299/0x3c8 path_openat+0x434/0x1100 do_filp_open+0x9b/0x10a do_sys_open+0x15f/0x3d7 kernel_init_freeable+0x157/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50

-> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d serial8250_console_write+0xa7/0x2a0 console_unlock+0x3b7/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 register_console+0x336/0x3a4 uart_add_one_port+0x51b/0x5be serial8250_register_8250_port+0x454/0x55e dw8250_probe+0x4dc/0x5b9 platform_drv_probe+0x67/0x8b really_probe+0x14a/0x422 driver_probe_device+0x66/0x130 device_driver_attach+0x42/0x5b __driver_attach+0xca/0x139 bus_for_each_dev+0x97/0xc9 bus_add_driver+0x12b/0x228 driver_register+0x64/0xed do_one_initcall+0x20c/0x4a6 do_initcall_level+0xb5/0xc5 do_basic_setup+0x4c/0x58 kernel_init_freeable+0x13f/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50

-> #0 (console_owner){-...}: __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 console_lock_spinning_enable+0x51/0x57 console_unlock+0x25d/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 ret_from_intr+0x0/0x1d cpuidle_enter_state+0x12f/0x1fd cpuidle_enter+0x2e/0x3d do_idle+0x1ce/0x2ce cpu_startup_entry+0x1d/0x1f start_kernel+0x406/0x46a secondary_startup_64+0xa4/0xb0

other info that might help us debug this:

Chain exists of: console_owner --> &port_lock_key --> &irq_desc_lock_class

Possible unsafe locking scenario:

CPU0 CPU1 ---- ---- lock(&irq_desc_lock_class); lock(&port_lock_key); lock(&irq_desc_lock_class); lock(console_owner);

*** DEADLOCK ***

2 locks held by swapper/0/0: #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181

stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55 Hardware name: XXXXXX Call Trace: <IRQ> dump_stack+0xbf/0x133 ? print_circular_bug+0xd6/0xe9 check_noncircular+0x1b9/0x1c3 __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 ? console_lock_spinning_enable+0x31/0x57 console_lock_spinning_enable+0x51/0x57 ? console_lock_spinning_enable+0x31/0x57 console_unlock+0x25d/0x528 ? console_trylock+0x18/0x4e vprintk_emit+0x111/0x17f ? lock_acquire+0x203/0x258 printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 common_interrupt+0xf/0xf </IRQ>

Signed-off-by: Sergey Senozhatsky sergey.senozhatsky@gmail.com Fixes: 768aec0b5bcc ("serial: 8250: fix shared interrupts issues with SMP and RT kernels") Reported-by: Guenter Roeck linux@roeck-us.net Reported-by: Raul Rangel rrangel@google.com BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800 Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDaf... Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Guenter Roeck linux@roeck-us.net Tested-by: Guenter Roeck linux@roeck-us.net Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200817022646.1484638-1-sergey.senozhatsky@gmail.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/tty/serial/8250/8250_port.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2205,6 +2205,10 @@ int serial8250_do_startup(struct uart_po

if (port->irq) { unsigned char iir1; + + if (port->irqflags & IRQF_SHARED) + disable_irq_nosync(port->irq); + /* * Test for UARTs that do not reassert THRE when the * transmitter is idle and the interrupt has already @@ -2214,8 +2218,6 @@ int serial8250_do_startup(struct uart_po * allow register changes to become visible. */ spin_lock_irqsave(&port->lock, flags); - if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(port->irq);

wait_for_xmitr(up, UART_LSR_THRE); serial_port_out_sync(port, UART_IER, UART_IER_THRI); @@ -2227,9 +2229,10 @@ int serial8250_do_startup(struct uart_po iir = serial_port_in(port, UART_IIR); serial_port_out(port, UART_IER, 0);

+ spin_unlock_irqrestore(&port->lock, flags); + if (port->irqflags & IRQF_SHARED) enable_irq(port->irq); - spin_unlock_irqrestore(&port->lock, flags);

/* * If the interrupt is not reasserted, or we otherwise

From: Jan Kara jack@suse.cz

commit 5afced3bf28100d81fb2fe7e98918632a08feaf5 upstream.

Inode's i_io_list list head is used to attach inode to several different lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker prepares a list of inodes to writeback e.g. for sync(2), it moves inodes to b_io list. Thus it is critical for sync(2) data integrity guarantees that inode is not requeued to any other writeback list when inode is queued for processing by flush worker. That's the reason why writeback_single_inode() does not touch i_io_list (unless the inode is completely clean) and why __mark_inode_dirty() does not touch i_io_list if I_SYNC flag is set.

However there are two flaws in the current logic:

1) When inode has only I_DIRTY_TIME set but it is already queued in b_io list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC) can still move inode back to b_dirty list resulting in skipping writeback of inode time stamps during sync(2).

2) When inode is on b_dirty_time list and writeback_single_inode() races with __mark_inode_dirty() like:

writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES) inode->i_state |= I_SYNC __writeback_single_inode() inode->i_state |= I_DIRTY_PAGES; if (inode->i_state & I_SYNC) bail if (!(inode->i_state & I_DIRTY_ALL)) - not true so nothing done

We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus standard background writeback will not writeback this inode leading to possible dirty throttling stalls etc. (thanks to Martijn Coenen for this analysis).

Fix these problems by tracking whether inode is queued in b_io or b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we know flush worker has queued inode and we should not touch i_io_list. On the other hand we also know that once flush worker is done with the inode it will requeue the inode to appropriate dirty list. When I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode to appropriate dirty list.

Reported-by: Martijn Coenen maco@android.com Reviewed-by: Martijn Coenen maco@android.com Tested-by: Martijn Coenen maco@android.com Reviewed-by: Christoph Hellwig hch@lst.de Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/fs-writeback.c | 17 ++++++++++++----- include/linux/fs.h | 8 ++++++-- 2 files changed, 18 insertions(+), 7 deletions(-)

--- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -162,6 +162,7 @@ static void inode_io_list_del_locked(str assert_spin_locked(&wb->list_lock); assert_spin_locked(&inode->i_lock);

+ inode->i_state &= ~I_SYNC_QUEUED; list_del_init(&inode->i_io_list); wb_io_lists_depopulated(wb); } @@ -1103,6 +1104,7 @@ static void redirty_tail_locked(struct i inode->dirtied_when = jiffies; } inode_io_list_move_locked(inode, wb, &wb->b_dirty); + inode->i_state &= ~I_SYNC_QUEUED; }

static void redirty_tail(struct inode *inode, struct bdi_writeback *wb) @@ -1178,8 +1180,11 @@ static int move_expired_inodes(struct li break; list_move(&inode->i_io_list, &tmp); moved++; + spin_lock(&inode->i_lock); if (flags & EXPIRE_DIRTY_ATIME) - set_bit(__I_DIRTY_TIME_EXPIRED, &inode->i_state); + inode->i_state |= I_DIRTY_TIME_EXPIRED; + inode->i_state |= I_SYNC_QUEUED; + spin_unlock(&inode->i_lock); if (sb_is_blkdev_sb(inode->i_sb)) continue; if (sb && sb != inode->i_sb) @@ -1354,6 +1359,7 @@ static void requeue_inode(struct inode * } else if (inode->i_state & I_DIRTY_TIME) { inode->dirtied_when = jiffies; inode_io_list_move_locked(inode, wb, &wb->b_dirty_time); + inode->i_state &= ~I_SYNC_QUEUED; } else { /* The inode is clean. Remove from writeback lists. */ inode_io_list_del_locked(inode, wb); @@ -2188,11 +2194,12 @@ void __mark_inode_dirty(struct inode *in inode->i_state |= flags;

/* - * If the inode is being synced, just update its dirty state. - * The unlocker will place the inode on the appropriate - * superblock list, based upon its state. + * If the inode is queued for writeback by flush worker, just + * update its dirty state. Once the flush worker is done with + * the inode it will place it on the appropriate superblock + * list, based upon its state. */ - if (inode->i_state & I_SYNC) + if (inode->i_state & I_SYNC_QUEUED) goto out_unlock_inode;

/* --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1954,6 +1954,10 @@ static inline bool HAS_UNMAPPED_ID(struc * wb stat updates to grab mapping->tree_lock. See * inode_switch_wb_work_fn() for details. * + * I_SYNC_QUEUED Inode is queued in b_io or b_more_io writeback lists. + * Used to detect that mark_inode_dirty() should not move + * inode between dirty lists. + * * Q: What is the difference between I_WILL_FREE and I_FREEING? */ #define I_DIRTY_SYNC (1 << 0) @@ -1971,9 +1975,9 @@ static inline bool HAS_UNMAPPED_ID(struc #define I_DIO_WAKEUP (1 << __I_DIO_WAKEUP) #define I_LINKABLE (1 << 10) #define I_DIRTY_TIME (1 << 11) -#define __I_DIRTY_TIME_EXPIRED 12 -#define I_DIRTY_TIME_EXPIRED (1 << __I_DIRTY_TIME_EXPIRED) +#define I_DIRTY_TIME_EXPIRED (1 << 12) #define I_WB_SWITCH (1 << 13) +#define I_SYNC_QUEUED (1 << 17)

#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES) #define I_DIRTY_ALL (I_DIRTY | I_DIRTY_TIME)

From: Thomas Gleixner tglx@linutronix.de

commit c330fb1ddc0a922f044989492b7fcca77ee1db46 upstream.

handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers.

This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer.

As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead.

A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that.

Cc: stable@vger.kernel.org Reported-by: Roman Shaposhnik roman@zededa.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Roman Shaposhnik roman@zededa.com Reviewed-by: Juergen Gross jgross@suse.com Link: https://lore.kernel.org/r/87lfi2yckt.fsf@nanos.tec.linutronix.de Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/xen/events/events_base.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/xen/events/events_base.c +++ b/drivers/xen/events/events_base.c @@ -155,7 +155,7 @@ int get_evtchn_to_irq(unsigned evtchn) /* Get info for IRQ */ struct irq_info *info_for_irq(unsigned irq) { - return irq_get_handler_data(irq); + return irq_get_chip_data(irq); }

/* Constructors for packed IRQ information. */ @@ -384,7 +384,7 @@ static void xen_irq_init(unsigned irq) info->type = IRQT_UNBOUND; info->refcnt = -1;

- irq_set_handler_data(irq, info); + irq_set_chip_data(irq, info);

list_add_tail(&info->list, &xen_irq_list_head); } @@ -433,14 +433,14 @@ static int __must_check xen_allocate_irq

static void xen_free_irq(unsigned irq) { - struct irq_info *info = irq_get_handler_data(irq); + struct irq_info *info = irq_get_chip_data(irq);

if (WARN_ON(!info)) return;

list_del(&info->list);

- irq_set_handler_data(irq, NULL); + irq_set_chip_data(irq, NULL);

WARN_ON(info->refcnt > 0);

@@ -610,7 +610,7 @@ EXPORT_SYMBOL_GPL(xen_irq_from_gsi); static void __unbind_from_irq(unsigned int irq) { int evtchn = evtchn_from_irq(irq); - struct irq_info *info = irq_get_handler_data(irq); + struct irq_info *info = irq_get_chip_data(irq);

if (info->refcnt > 0) { info->refcnt--; @@ -1114,7 +1114,7 @@ int bind_ipi_to_irqhandler(enum ipi_vect

void unbind_from_irqhandler(unsigned int irq, void *dev_id) { - struct irq_info *info = irq_get_handler_data(irq); + struct irq_info *info = irq_get_chip_data(irq);

if (WARN_ON(!info)) return; @@ -1148,7 +1148,7 @@ int evtchn_make_refcounted(unsigned int if (irq == -1) return -ENOENT;

- info = irq_get_handler_data(irq); + info = irq_get_chip_data(irq);

if (!info) return -ENOENT; @@ -1176,7 +1176,7 @@ int evtchn_get(unsigned int evtchn) if (irq == -1) goto done;

- info = irq_get_handler_data(irq); + info = irq_get_chip_data(irq);

if (!info) goto done;

From: Rafael J. Wysocki rafael.j.wysocki@intel.com

commit e3eb6e8fba65094328b8dca635d00de74ba75b45 upstream.

It has been reported that system-wide suspend may be aborted in the absence of any wakeup events due to unforseen interactions of it with the runtume PM framework.

One failing scenario is when there are multiple devices sharing an ACPI power resource and runtime-resume needs to be carried out for one of them during system-wide suspend (for example, because it needs to be reconfigured before the whole system goes to sleep). In that case, the runtime-resume of that device involves turning the ACPI power resource "on" which in turn causes runtime-resume requests to be queued up for all of the other devices sharing it. Those requests go to the runtime PM workqueue which is frozen during system-wide suspend, so they are not actually taken care of until the resume of the whole system, but the pm_runtime_barrier() call in __device_suspend() sees them and triggers system wakeup events for them which then cause the system-wide suspend to be aborted if wakeup source objects are in active use.

Of course, the logic that leads to triggering those wakeup events is questionable in the first place, because clearly there are cases in which a pending runtime resume request for a device is not connected to any real wakeup events in any way (like the one above). Moreover, it is racy, because the device may be resuming already by the time the pm_runtime_barrier() runs and so if the driver doesn't take care of signaling the wakeup event as appropriate, it will be lost. However, if the driver does take care of that, the extra pm_wakeup_event() call in the core is redundant.

Accordingly, drop the conditional pm_wakeup_event() call fron __device_suspend() and make the latter call pm_runtime_barrier() alone. Also modify the comment next to that call to reflect the new code and extend it to mention the need to avoid unwanted interactions between runtime PM and system-wide device suspend callbacks.

Fixes: 1e2ef05bb8cf8 ("PM: Limit race conditions between runtime PM and system sleep (v2)") Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Acked-by: Alan Stern stern@rowland.harvard.edu Reported-by: Utkarsh H Patel utkarsh.h.patel@intel.com Tested-by: Utkarsh H Patel utkarsh.h.patel@intel.com Tested-by: Pengfei Xu pengfei.xu@intel.com Cc: All applicable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/base/power/main.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1366,13 +1366,17 @@ static int __device_suspend(struct devic }

/* - * If a device configured to wake up the system from sleep states - * has been suspended at run time and there's a resume request pending - * for it, this is equivalent to the device signaling wakeup, so the - * system suspend operation should be aborted. + * Wait for possible runtime PM transitions of the device in progress + * to complete and if there's a runtime resume request pending for it, + * resume it before proceeding with invoking the system-wide suspend + * callbacks for it. + * + * If the system-wide suspend callbacks below change the configuration + * of the device, they must disable runtime PM for it or otherwise + * ensure that its runtime-resume callbacks will not be confused by that + * change in case they are invoked going forward. */ - if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) - pm_wakeup_event(dev, 0); + pm_runtime_barrier(dev);

if (pm_wakeup_pending()) { dev->power.direct_complete = false;

From: Alan Stern stern@rowland.harvard.edu

commit f176ede3a3bde5b398a6777a7f9ff091baa2d3ff upstream.

The syzbot fuzzer identified a bug in the yurex driver: It passes GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING:

do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000370c7c68>] prepare_to_wait+0xb1/0x2a0 kernel/sched/wait.c:247 WARNING: CPU: 1 PID: 340 at kernel/sched/core.c:7253 __might_sleep+0x135/0x190 kernel/sched/core.c:7253 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 340 Comm: syz-executor677 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 panic+0x2aa/0x6e1 kernel/panic.c:231 __warn.cold+0x20/0x50 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x41/0x80 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:__might_sleep+0x135/0x190 kernel/sched/core.c:7253 Code: 65 48 8b 1c 25 40 ef 01 00 48 8d 7b 10 48 89 fe 48 c1 ee 03 80 3c 06 00 75 2b 48 8b 73 10 48 c7 c7 e0 9e 06 86 e8 ed 12 f6 ff <0f> 0b e9 46 ff ff ff e8 1f b2 4b 00 e9 29 ff ff ff e8 15 b2 4b 00 RSP: 0018:ffff8881cdb77a28 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881c6458000 RCX: 0000000000000000 RDX: ffff8881c6458000 RSI: ffffffff8129ec93 RDI: ffffed1039b6ef37 RBP: ffffffff86fdade2 R08: 0000000000000001 R09: ffff8881db32f54f R10: 0000000000000000 R11: 0000000030343354 R12: 00000000000001f2 R13: 0000000000000000 R14: 0000000000000068 R15: ffffffff83c1b1aa slab_pre_alloc_hook.constprop.0+0xea/0x200 mm/slab.h:498 slab_alloc_node mm/slub.c:2816 [inline] slab_alloc mm/slub.c:2900 [inline] kmem_cache_alloc_trace+0x46/0x220 mm/slub.c:2917 kmalloc include/linux/slab.h:554 [inline] dummy_urb_enqueue+0x7a/0x880 drivers/usb/gadget/udc/dummy_hcd.c:1251 usb_hcd_submit_urb+0x2b2/0x22d0 drivers/usb/core/hcd.c:1547 usb_submit_urb+0xb4e/0x13e0 drivers/usb/core/urb.c:570 yurex_write+0x3ea/0x820 drivers/usb/misc/yurex.c:495

This patch changes the call to use GFP_ATOMIC instead of GFP_KERNEL.

Reported-and-tested-by: syzbot+c2c3302f9c601a4b1be2@syzkaller.appspotmail.com Signed-off-by: Alan Stern stern@rowland.harvard.edu CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200810182954.GB307778@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/misc/yurex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -502,7 +502,7 @@ static ssize_t yurex_write(struct file * prepare_to_wait(&dev->waitq, &wait, TASK_INTERRUPTIBLE); dev_dbg(&dev->interface->dev, "%s - submit %c\n", __func__, dev->cntl_buffer[0]); - retval = usb_submit_urb(dev->cntl_urb, GFP_KERNEL); + retval = usb_submit_urb(dev->cntl_urb, GFP_ATOMIC); if (retval >= 0) timeout = schedule_timeout(YUREX_WRITE_TIMEOUT); finish_wait(&dev->waitq, &wait);

From: Kai-Heng Feng kai.heng.feng@canonical.com

commit 5967116e8358899ebaa22702d09b0af57fef23e1 upstream.

There's another Raydium touchscreen needs the no-lpm quirk: [ 1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00 [ 1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.339151] usb 1-9: Product: Raydium Touch System [ 1.339152] usb 1-9: Manufacturer: Raydium Corporation ... [ 6.450497] usb 1-9: can't set config #1, error -110

BugLink: https://bugs.launchpad.net/bugs/1889446 Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200731051622.28643-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/core/quirks.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -299,6 +299,8 @@ static const struct usb_device_id usb_qu

{ USB_DEVICE(0x2386, 0x3119), .driver_info = USB_QUIRK_NO_LPM },

+ { USB_DEVICE(0x2386, 0x350e), .driver_info = USB_QUIRK_NO_LPM }, + /* DJI CineSSD */ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },

From: Tang Bin tangbin@cmss.chinamobile.com

commit 1d4169834628d18b2392a2da92b7fbf5e8e2ce89 upstream.

If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here.

Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju zhangshengju@cmss.chinamobile.com Cc: stable stable@vger.kernel.org Signed-off-by: Tang Bin tangbin@cmss.chinamobile.com Reviewed-by: Krzysztof Kozlowski krzk@kernel.org Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/host/ohci-exynos.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -166,9 +166,8 @@ skip_phy: hcd->rsrc_len = resource_size(res);

irq = platform_get_irq(pdev, 0); - if (!irq) { - dev_err(&pdev->dev, "Failed to get IRQ\n"); - err = -ENODEV; + if (irq < 0) { + err = irq; goto fail_io; }

From: Brooke Basile brookebasile@gmail.com

commit b1cd1b65afba95971fa457dfdb2c941c60d38c5b upstream.

size can potentially hold an overflowed value if its assigned expression is left unchecked, leading to a smaller than needed allocation when vla_group_size() is used by callers to allocate memory. To fix this, add a test for saturation before declaring variables and an overflow check to (n) * sizeof(type). If the expression results in overflow, vla_group_size() will return SIZE_MAX.

Reported-by: Ilja Van Sprundel ivansprundel@ioactive.com Suggested-by: Kees Cook keescook@chromium.org Signed-off-by: Brooke Basile brookebasile@gmail.com Acked-by: Felipe Balbi balbi@kernel.org Cc: stable stable@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/gadget/u_f.h | 38 +++++++++++++++++++++++++++----------- 1 file changed, 27 insertions(+), 11 deletions(-)

--- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -17,6 +17,7 @@ #define __U_F_H__

#include <linux/usb/gadget.h> +#include <linux/overflow.h>

/* Variable Length Array Macros **********************************************/ #define vla_group(groupname) size_t groupname##__next = 0 @@ -24,21 +25,36 @@

#define vla_item(groupname, type, name, n) \ size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = (n) * sizeof(type); \ - groupname##__next = offset + size; \ + size_t offset = 0; \ + if (groupname##__next != SIZE_MAX) { \ + size_t align_mask = __alignof__(type) - 1; \ + size_t offset = (groupname##__next + align_mask) \ + & ~align_mask; \ + size_t size = array_size(n, sizeof(type)); \ + if (check_add_overflow(offset, size, \ + &groupname##__next)) { \ + groupname##__next = SIZE_MAX; \ + offset = 0; \ + } \ + } \ offset; \ })

#define vla_item_with_sz(groupname, type, name, n) \ - size_t groupname##_##name##__sz = (n) * sizeof(type); \ - size_t groupname##_##name##__offset = ({ \ - size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) & ~align_mask;\ - size_t size = groupname##_##name##__sz; \ - groupname##__next = offset + size; \ - offset; \ + size_t groupname##_##name##__sz = array_size(n, sizeof(type)); \ + size_t groupname##_##name##__offset = ({ \ + size_t offset = 0; \ + if (groupname##__next != SIZE_MAX) { \ + size_t align_mask = __alignof__(type) - 1; \ + size_t offset = (groupname##__next + align_mask) \ + & ~align_mask; \ + if (check_add_overflow(offset, groupname##_##name##__sz,\ + &groupname##__next)) { \ + groupname##__next = SIZE_MAX; \ + offset = 0; \ + } \ + } \ + offset; \ })

#define vla_ptr(ptr, groupname, name) \

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

commit bfd08d06d978d0304eb6f7855b548aa2cd1c5486 upstream.

Inadvertently the commit b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one.

Fixes: b1cd1b65afba ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by: Marek Szyprowski m.szyprowski@samsung.com Tested-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Cc: Brooke Basile brookebasile@gmail.com Cc: stable stable@kernel.org Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.int... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/gadget/u_f.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -28,9 +28,9 @@ size_t offset = 0; \ if (groupname##__next != SIZE_MAX) { \ size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) \ - & ~align_mask; \ size_t size = array_size(n, sizeof(type)); \ + offset = (groupname##__next + align_mask) & \ + ~align_mask; \ if (check_add_overflow(offset, size, \ &groupname##__next)) { \ groupname##__next = SIZE_MAX; \ @@ -46,8 +46,8 @@ size_t offset = 0; \ if (groupname##__next != SIZE_MAX) { \ size_t align_mask = __alignof__(type) - 1; \ - size_t offset = (groupname##__next + align_mask) \ - & ~align_mask; \ + offset = (groupname##__next + align_mask) & \ + ~align_mask; \ if (check_add_overflow(offset, groupname##_##name##__sz,\ &groupname##__next)) { \ groupname##__next = SIZE_MAX; \

From: Josef Bacik josef@toxicpanda.com

[ Upstream commit fb2fecbad50964b9f27a3b182e74e437b40753ef ]

With my new locking code dbench is so much faster that I tripped over a transaction abort from ENOSPC. This turned out to be because btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this function sets err on error, and returns err. So instead of properly marking the inode as needing a full commit, we were returning -ENOSPC and aborting in __btrfs_unlink_inode. Fix this by checking the proper variable so that we return the correct thing in the case of ENOSPC.

The ENOENT needs to be checked, because btrfs_lookup_dir_item_index() can return -ENOENT if the dir item isn't in the tree log (which would happen if we hadn't fsync'ed this guy). We actually handle that case in __btrfs_unlink_inode, so it's an expected error to get back.

Fixes: 4a500fd178c8 ("Btrfs: Metadata ENOSPC handling for tree log") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com [ add note and comment about ENOENT ] Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/tree-log.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index c28ac9c464251..5bd1758f57b64 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -3191,11 +3191,13 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, btrfs_free_path(path); out_unlock: mutex_unlock(&BTRFS_I(dir)->log_mutex); - if (ret == -ENOSPC) { + if (err == -ENOSPC) { btrfs_set_log_full_commit(root->fs_info, trans); - ret = 0; - } else if (ret < 0) - btrfs_abort_transaction(trans, ret); + err = 0; + } else if (err < 0 && err != -ENOENT) { + /* ENOENT can be returned if the entry hasn't been fsynced yet */ + btrfs_abort_transaction(trans, err); + }

btrfs_end_log_trans(root);

From: Hector Martin marcan@marcan.st

commit 74a2a7de81a2ef20732ec02087314e92692a7a1b upstream.

As the recent fix addressed the channel swap problem more properly, update the comment as well.

Fixes: 1b7ecc241a67 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109") Signed-off-by: Hector Martin marcan@marcan.st Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.st Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/usb/quirks-table.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3331,8 +3331,8 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge * they pretend to be 96kHz mono as a workaround for stereo being broken * by that... * - * They also have swapped L-R channels, but that's for userspace to deal - * with. + * They also have an issue with initial stream alignment that causes the + * channels to be swapped and out of phase, which is dealt with in quirks.c. */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE |