From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]
When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8731.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 4f9a1eb28120..abe5e77ba171 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -604,7 +604,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731) ret = wm8731_reset(wm8731->regmap); if (ret < 0) { dev_err(dev, "Failed to issue reset: %d\n", ret); - goto err_regulator_enable; + goto err; }
/* Clear POWEROFF, keep everything else disabled */ @@ -621,10 +621,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
regcache_mark_dirty(wm8731->regmap);
-err_regulator_enable: - /* Regulators will be enabled by bias management */ - regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); - +err: return ret; }
@@ -768,21 +765,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(wm8731->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); - return ret; + goto err_regulator_enable; }
ret = wm8731_hw_init(&i2c->dev, wm8731); if (ret != 0) - return ret; + goto err_regulator_enable;
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8731, &wm8731_dai, 1); if (ret != 0) { dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); - return ret; + goto err_regulator_enable; }
return 0; + +err_regulator_enable: + /* Regulators will be enabled by bias management */ + regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); + + return ret; }
static int wm8731_i2c_remove(struct i2c_client *client)
From: Duoming Zhou duoming@zju.edu.cn
[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.
Signed-off-by: Duoming Zhou duoming@zju.edu.cn Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/hippi/rrunner.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 6f3519123eb6..0e1a422d9567 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -1354,7 +1354,9 @@ static int rr_close(struct net_device *dev)
rrpriv->fw_running = 0;
+ spin_unlock_irqrestore(&rrpriv->lock, flags); del_timer_sync(&rrpriv->timer); + spin_lock_irqsave(&rrpriv->lock, flags);
writel(0, ®s->TxPi); writel(0, ®s->IpRxPi);
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit aafa9f958342db36c17ac2a7f1b841032c96feb4 ]
Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error:
[ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] <TASK> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/pata_marvell.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index ff468a6fd8dd..677f582cf3d6 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -82,6 +82,8 @@ static int marvell_cable_detect(struct ata_port *ap) switch(ap->port_no) { case 0: + if (!ap->ioaddr.bmdma_addr) + return ATA_CBL_PATA_UNK; if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1) return ATA_CBL_PATA40; return ATA_CBL_PATA80;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin