[PATCH v2 1/1] mm/rmap: fix potential out-of-bounds page table access during batched unmap
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/a694398c-9f03-4737-81b9-7e49c857fcbe@redhat...
Fixes: 354dffd29575 ("mm: support batched unmap for lazyfree large folios during reclamation") Cc: stable@vger.kernel.org Suggested-by: David Hildenbrand david@redhat.com Suggested-by: Barry Song baohua@kernel.org Signed-off-by: Lance Yang lance.yang@linux.dev --- v1 -> v2: - Update subject and changelog (per Barry) - https://lore.kernel.org/linux-mm/20250627025214.30887-1-lance.yang@linux.dev
mm/rmap.c | 46 ++++++++++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/mm/rmap.c b/mm/rmap.c index fb63d9256f09..1320b88fab74 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -1845,23 +1845,32 @@ void folio_remove_rmap_pud(struct folio *folio, struct page *page, #endif }
-/* We support batch unmapping of PTEs for lazyfree large folios */ -static inline bool can_batch_unmap_folio_ptes(unsigned long addr, - struct folio *folio, pte_t *ptep) +static inline unsigned int folio_unmap_pte_batch(struct folio *folio, + struct page_vma_mapped_walk *pvmw, + enum ttu_flags flags, pte_t pte) { const fpb_t fpb_flags = FPB_IGNORE_DIRTY | FPB_IGNORE_SOFT_DIRTY; - int max_nr = folio_nr_pages(folio); - pte_t pte = ptep_get(ptep); + unsigned long end_addr, addr = pvmw->address; + struct vm_area_struct *vma = pvmw->vma; + unsigned int max_nr; + + if (flags & TTU_HWPOISON) + return 1; + if (!folio_test_large(folio)) + return 1;
+ /* We may only batch within a single VMA and a single page table. */ + end_addr = pmd_addr_end(addr, vma->vm_end); + max_nr = (end_addr - addr) >> PAGE_SHIFT; + + /* We only support lazyfree batching for now ... */ if (!folio_test_anon(folio) || folio_test_swapbacked(folio)) - return false; + return 1; if (pte_unused(pte)) - return false; - if (pte_pfn(pte) != folio_pfn(folio)) - return false; + return 1;
- return folio_pte_batch(folio, addr, ptep, pte, max_nr, fpb_flags, NULL, - NULL, NULL) == max_nr; + return folio_pte_batch(folio, addr, pvmw->pte, pte, max_nr, fpb_flags, + NULL, NULL, NULL); }
/* @@ -2024,9 +2033,7 @@ static bool try_to_unmap_one(struct folio *folio, struct vm_area_struct *vma, if (pte_dirty(pteval)) folio_mark_dirty(folio); } else if (likely(pte_present(pteval))) { - if (folio_test_large(folio) && !(flags & TTU_HWPOISON) && - can_batch_unmap_folio_ptes(address, folio, pvmw.pte)) - nr_pages = folio_nr_pages(folio); + nr_pages = folio_unmap_pte_batch(folio, &pvmw, flags, pteval); end_addr = address + nr_pages * PAGE_SIZE; flush_cache_range(vma, address, end_addr);
@@ -2206,13 +2213,16 @@ static bool try_to_unmap_one(struct folio *folio, struct vm_area_struct *vma, hugetlb_remove_rmap(folio); } else { folio_remove_rmap_ptes(folio, subpage, nr_pages, vma); - folio_ref_sub(folio, nr_pages - 1); } if (vma->vm_flags & VM_LOCKED) mlock_drain_local(); - folio_put(folio); - /* We have already batched the entire folio */ - if (nr_pages > 1) + folio_put_refs(folio, nr_pages); + + /* + * If we are sure that we batched the entire folio and cleared + * all PTEs, we can just optimize and stop right here. + */ + if (nr_pages == folio_nr_pages(folio)) goto walk_done; continue; walk_abort:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote:
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/a694398c-9f03-4737-81b9-7e49c857fcbe@redhat...
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Thanks Barry
On Fri, Jun 27, 2025 at 6:52 PM Barry Song 21cnbao@gmail.com wrote:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote:
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/a694398c-9f03-4737-81b9-7e49c857fcbe@redhat...
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Sorry, I meant that MADV_FREE typically splits large folios if the specified range doesn't cover the entire folio.
Thanks Barry
On 2025/6/27 14:55, Barry Song wrote:
On Fri, Jun 27, 2025 at 6:52 PM Barry Song 21cnbao@gmail.com wrote:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote:
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/a694398c-9f03-4737-81b9-7e49c857fcbe@redhat...
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Sorry, I meant that MADV_FREE typically splits large folios if the specified range doesn't cover the entire folio.
Hmm... I got it wrong as well :( It's the partial coverage that triggers the split.
how about this revised version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such boundary-straddling cases are rare in practice, as MADV_FREE will typically split a large folio if the advice range does not cover the entire folio.
On Fri, Jun 27, 2025 at 7:15 PM Lance Yang lance.yang@linux.dev wrote:
On 2025/6/27 14:55, Barry Song wrote:
On Fri, Jun 27, 2025 at 6:52 PM Barry Song 21cnbao@gmail.com wrote:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote:
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/a694398c-9f03-4737-81b9-7e49c857fcbe@redhat...
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Sorry, I meant that MADV_FREE typically splits large folios if the specified range doesn't cover the entire folio.
Hmm... I got it wrong as well :( It's the partial coverage that triggers the split.
how about this revised version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such boundary-straddling cases are rare in practice, as MADV_FREE will typically split a large folio if the advice range does not cover the entire folio.
I assume the out-of-bounds access must be fixed, even though it is very unlikely. It might occur after a large folio is marked with MADV_FREE and then remapped to an unaligned address, potentially crossing two PTE tables.
A batch size between 2 and nr_pages - 1 is practically rare, as we typically split large folios when MADV_FREE does not cover the entire folio range. Cases where a batch of size 2 or nr_pages - 1 occurs may only happen if a large folio is partially unmapped after being marked MADV_FREE, which is quite an unusual pattern in userspace.
Let's wait for David's feedback before preparing a new version :-)
Thanks Barry
On 27.06.25 09:36, Barry Song wrote:
On Fri, Jun 27, 2025 at 7:15 PM Lance Yang lance.yang@linux.dev wrote:
On 2025/6/27 14:55, Barry Song wrote:
On Fri, Jun 27, 2025 at 6:52 PM Barry Song 21cnbao@gmail.com wrote:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote:
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/a694398c-9f03-4737-81b9-7e49c857fcbe@redhat...
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Sorry, I meant that MADV_FREE typically splits large folios if the specified range doesn't cover the entire folio.
Hmm... I got it wrong as well :( It's the partial coverage that triggers the split.
how about this revised version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such boundary-straddling cases are rare in practice, as MADV_FREE will typically split a large folio if the advice range does not cover the entire folio.
I assume the out-of-bounds access must be fixed, even though it is very unlikely. It might occur after a large folio is marked with MADV_FREE and then remapped to an unaligned address, potentially crossing two PTE tables.
Right. If it can be triggered from userspace, it doesn't matter how likely/common/whatever it is. It must be fixed.
A batch size between 2 and nr_pages - 1 is practically rare, as we typically split large folios when MADV_FREE does not cover the entire folio range. Cases where a batch of size 2 or nr_pages - 1 occurs may only happen if a large folio is partially unmapped after being marked MADV_FREE, which is quite an unusual pattern in userspace.
I think the point is rather "Simplify the code by not special-casing for completely mapped folios, there is no real reason why we cannot batch ranges that don't cover the complete folio.".
On 2025/6/27 18:13, David Hildenbrand wrote:
On 27.06.25 09:36, Barry Song wrote:
On Fri, Jun 27, 2025 at 7:15 PM Lance Yang lance.yang@linux.dev wrote:
On 2025/6/27 14:55, Barry Song wrote:
On Fri, Jun 27, 2025 at 6:52 PM Barry Song 21cnbao@gmail.com wrote:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote:
From: Lance Yang lance.yang@linux.dev
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
[1] https://lore.kernel.org/linux-mm/ a694398c-9f03-4737-81b9-7e49c857fcbe@redhat.com
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Sorry, I meant that MADV_FREE typically splits large folios if the specified range doesn't cover the entire folio.
Hmm... I got it wrong as well :( It's the partial coverage that triggers the split.
how about this revised version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such boundary-straddling cases are rare in practice, as MADV_FREE will typically split a large folio if the advice range does not cover the entire folio.
I assume the out-of-bounds access must be fixed, even though it is very unlikely. It might occur after a large folio is marked with MADV_FREE and then remapped to an unaligned address, potentially crossing two PTE tables.
Right. If it can be triggered from userspace, it doesn't matter how likely/common/whatever it is. It must be fixed.
Agreed. It must be fixed regardless of how rare the scenario is ;)
A batch size between 2 and nr_pages - 1 is practically rare, as we typically split large folios when MADV_FREE does not cover the entire folio range. Cases where a batch of size 2 or nr_pages - 1 occurs may only happen if a large folio is partially unmapped after being marked MADV_FREE, which is quite an unusual pattern in userspace.
I think the point is rather "Simplify the code by not special-casing for completely mapped folios, there is no real reason why we cannot batch ranges that don't cover the complete folio.".
Yeah. That makes the code cleaner and more generic, as there is no strong reason to special-case for fully mapped folios ;)
Based on that, I think we're on the same page now. I'd like to post the following commit message for the next version:
``` As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table.
While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios. ```
So, wdyt?
Thanks, Lance
On 27.06.25 17:29, Lance Yang wrote:
On 2025/6/27 18:13, David Hildenbrand wrote:
On 27.06.25 09:36, Barry Song wrote:
On Fri, Jun 27, 2025 at 7:15 PM Lance Yang lance.yang@linux.dev wrote:
On 2025/6/27 14:55, Barry Song wrote:
On Fri, Jun 27, 2025 at 6:52 PM Barry Song 21cnbao@gmail.com wrote:
On Fri, Jun 27, 2025 at 6:23 PM Lance Yang ioworker0@gmail.com wrote: > > From: Lance Yang lance.yang@linux.dev > > As pointed out by David[1], the batched unmap logic in > try_to_unmap_one() > can read past the end of a PTE table if a large folio is mapped > starting at > the last entry of that table. It would be quite rare in practice, as > MADV_FREE typically splits the large folio ;) > > So let's fix the potential out-of-bounds read by refactoring the > logic into > a new helper, folio_unmap_pte_batch(). > > The new helper now correctly calculates the safe number of pages > to scan by > limiting the operation to the boundaries of the current VMA and > the PTE > table. > > In addition, the "all-or-nothing" batching restriction is removed to > support partial batches. The reference counting is also cleaned up > to use > folio_put_refs(). > > [1] https://lore.kernel.org/linux-mm/ > a694398c-9f03-4737-81b9-7e49c857fcbe@redhat.com >
What about ?
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such cases are rare in practice, as MADV_FREE typically splits large folios.
Sorry, I meant that MADV_FREE typically splits large folios if the specified range doesn't cover the entire folio.
Hmm... I got it wrong as well :( It's the partial coverage that triggers the split.
how about this revised version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio spans across two PMDs, particularly after being remapped with mremap(). This patch fixes the potential out-of-bounds access by capping the batch at vm_end and the PMD boundary.
It also refactors the logic into a new helper, folio_unmap_pte_batch(), which supports batching between 1 and folio_nr_pages. This improves code clarity. Note that such boundary-straddling cases are rare in practice, as MADV_FREE will typically split a large folio if the advice range does not cover the entire folio.
I assume the out-of-bounds access must be fixed, even though it is very unlikely. It might occur after a large folio is marked with MADV_FREE and then remapped to an unaligned address, potentially crossing two PTE tables.
Right. If it can be triggered from userspace, it doesn't matter how likely/common/whatever it is. It must be fixed.
Agreed. It must be fixed regardless of how rare the scenario is ;)
A batch size between 2 and nr_pages - 1 is practically rare, as we typically split large folios when MADV_FREE does not cover the entire folio range. Cases where a batch of size 2 or nr_pages - 1 occurs may only happen if a large folio is partially unmapped after being marked MADV_FREE, which is quite an unusual pattern in userspace.
I think the point is rather "Simplify the code by not special-casing for completely mapped folios, there is no real reason why we cannot batch ranges that don't cover the complete folio.".
Yeah. That makes the code cleaner and more generic, as there is no strong reason to special-case for fully mapped folios ;)
Based on that, I think we're on the same page now. I'd like to post the following commit message for the next version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.So, wdyt?
Sounds good to me.
On Sat, Jun 28, 2025 at 3:29 AM Lance Yang lance.yang@linux.dev wrote:
[...]
Based on that, I think we're on the same page now. I'd like to post the following commit message for the next version:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.So, wdyt?
Acked-by: Barry Song baohua@kernel.org
Thanks Barry
On Fri, 27 Jun 2025 14:23:19 +0800 Lance Yang ioworker0@gmail.com wrote:
As pointed out by David[1], the batched unmap logic in try_to_unmap_one() can read past the end of a PTE table if a large folio is mapped starting at the last entry of that table. It would be quite rare in practice, as MADV_FREE typically splits the large folio ;)
So let's fix the potential out-of-bounds read by refactoring the logic into a new helper, folio_unmap_pte_batch().
The new helper now correctly calculates the safe number of pages to scan by limiting the operation to the boundaries of the current VMA and the PTE table.
In addition, the "all-or-nothing" batching restriction is removed to support partial batches. The reference counting is also cleaned up to use folio_put_refs().
I'll queue this for testing while the updated changelog is being prepared.
linux-stable-mirror@lists.linaro.org
-
Andrew Morton -
Barry Song -
David Hildenbrand -
Lance Yang -
Lance Yang