From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]
When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8731.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 4f9a1eb28120..abe5e77ba171 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -604,7 +604,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731) ret = wm8731_reset(wm8731->regmap); if (ret < 0) { dev_err(dev, "Failed to issue reset: %d\n", ret); - goto err_regulator_enable; + goto err; }
/* Clear POWEROFF, keep everything else disabled */ @@ -621,10 +621,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
regcache_mark_dirty(wm8731->regmap);
-err_regulator_enable: - /* Regulators will be enabled by bias management */ - regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); - +err: return ret; }
@@ -768,21 +765,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(wm8731->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); - return ret; + goto err_regulator_enable; }
ret = wm8731_hw_init(&i2c->dev, wm8731); if (ret != 0) - return ret; + goto err_regulator_enable;
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8731, &wm8731_dai, 1); if (ret != 0) { dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); - return ret; + goto err_regulator_enable; }
return 0; + +err_regulator_enable: + /* Regulators will be enabled by bias management */ + regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); + + return ret; }
static int wm8731_i2c_remove(struct i2c_client *client)
From: Mikulas Patocka mpatocka@redhat.com
[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]
The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/lib/usercopy_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 2c3b4bcbe8f2..0650b440b389 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -140,7 +140,7 @@ void memcpy_flushcache(void *_dst, const void *_src, size_t size)
/* cache copy and flush to align dest */ if (!IS_ALIGNED(dest, 8)) { - unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest); + size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
memcpy((void *) dest, (void *) source, len); clean_cache_range((void *) dest, len);
From: Ronnie Sahlberg lsahlber@redhat.com
[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]
because the copychunk_write might cover a region of the file that has not yet been sent to the server and thus fail.
A simple way to reproduce this is: truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile
the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with the 'fcollapse 16k 24k' due to write-back caching.
fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call and it will fail serverside since the file is still 0b in size serverside until the writes have been destaged. To avoid this we must ensure that we destage any unwritten data to the server before calling COPYCHUNK_WRITE.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373 Reported-by: Xiaoli Feng xifeng@redhat.com Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cifs/smb2ops.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index ba56c00f2650..3280a801b1d7 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -855,9 +855,17 @@ smb2_copychunk_range(const unsigned int xid, int chunks_copied = 0; bool chunk_sizes_updated = false; ssize_t bytes_written, total_bytes_written = 0; + struct inode *inode;
pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
+ /* + * We need to flush all unwritten data before we can send the + * copychunk ioctl to the server. + */ + inode = d_inode(trgtfile->dentry); + filemap_write_and_wait(inode->i_mapping); + if (pcchunk == NULL) return -ENOMEM;
From: Duoming Zhou duoming@zju.edu.cn
[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock.
Signed-off-by: Duoming Zhou duoming@zju.edu.cn Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/hippi/rrunner.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c index 40ef4aeb0ef0..3a73ac03fb2b 100644 --- a/drivers/net/hippi/rrunner.c +++ b/drivers/net/hippi/rrunner.c @@ -1354,7 +1354,9 @@ static int rr_close(struct net_device *dev)
rrpriv->fw_running = 0;
+ spin_unlock_irqrestore(&rrpriv->lock, flags); del_timer_sync(&rrpriv->timer); + spin_lock_irqsave(&rrpriv->lock, flags);
writel(0, ®s->TxPi); writel(0, ®s->IpRxPi);
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit aafa9f958342db36c17ac2a7f1b841032c96feb4 ]
Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error:
[ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] <TASK> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/pata_marvell.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index ff468a6fd8dd..677f582cf3d6 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -82,6 +82,8 @@ static int marvell_cable_detect(struct ata_port *ap) switch(ap->port_no) { case 0: + if (!ap->ioaddr.bmdma_addr) + return ATA_CBL_PATA_UNK; if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1) return ATA_CBL_PATA40; return ATA_CBL_PATA80;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin