arm: TI BeagleBoard X15 : Unable to handle kernel NULL pointer dereference at virtual address 00000369 - Internal error: Oops: 5 [#1] SMP ARM
Following kernel oops found while booting arm 32 bit x15 device with kselftest configs enabled on stable-rc linux-5.15. This is specific to kselftest merge config build booting on arm TI BeagleBoard X15 device.
This is an intermittent issue and not specific to current stable rc release.
Reported-by: Linux Kernel Functional Testing lkft@linaro.org
[ 0.000000] Linux version 5.15.78-rc1 (tuxmake@tuxmake) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP @1667916073 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d ... [ 5.375946] 8<--- cut here --- [ 5.379089] Unable to handle kernel NULL pointer dereference at virtual address 00000369 [ 5.387237] pgd = (ptrval) [ 5.389953] [00000369] *pgd=00000000 [ 5.393585] Internal error: Oops: 5 [#1] SMP ARM [ 5.398223] Modules linked in: [ 5.401306] CPU: 0 PID: 8 Comm: kworker/0:0H Not tainted 5.15.78-rc1 #1 [ 5.407958] Hardware name: Generic DRA74X (Flattened Device Tree) [ 5.414093] PC is at do_page_fault+0x94/0x464 [ 5.418487] LR is at do_translation_fault+0xc0/0xc4 [ 5.423400] pc : [<c15cdbb0>] lr : [<c15ce040>] psr: 20000193 [ 5.429687] sp : c31ce020 ip : ffffe000 fp : c31ce06c [ 5.434936] r10: 00003b9a r9 : c31ce000 r8 : 00000000 [ 5.440216] r7 : c2110e10 r6 : 00000665 r5 : 00000005 r4 : c31ce0c8 [ 5.446777] r3 : c31ce000 r2 : 00000001 r1 : 2ca6c000 r0 : 00000665 [ 5.453338] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 5.460601] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 5.466369] Register r0 information: non-paged memory [ 5.471466] Register r1 information: non-paged memory [ 5.476531] Register r2 information: non-paged memory [ 5.481628] Register r3 information: non-slab/vmalloc memory [ 5.487335] Register r4 information: non-slab/vmalloc memory [ 5.493011] Register r5 information: non-paged memory [ 5.498107] Register r6 information: non-paged memory [ 5.503204] Register r7 information: non-slab/vmalloc memory [ 5.508880] Register r8 information: NULL pointer [ 5.513610] Register r9 information: non-slab/vmalloc memory [ 5.519317] Register r10 information: non-paged memory [ 5.524475] Register r11 information: non-slab/vmalloc memory [ 5.530273] Register r12 information: non-paged memory [ 5.535430] Process kworker/0:0H (pid: 8, stack limit = 0x(ptrval)) [ 5.541748] Stack: (0xc31ce020 to 0xc31ce000) [ 5.546142] Backtrace: ... [ 7.896820] Code: e5942040 e3c3303f e3120080 e5932008 (e5927368) [ 7.902954] ---[ end trace 86f7fd8d70b6f6f9 ]--- [ 7.907592] note: kworker/0:0H[8] exited with preempt_count 2 [ 7.913360] ------------[ cut here ]------------ [ 7.917999] WARNING: CPU: 0 PID: 8 at kernel/sched/core.c:9542 __might_sleep+0xa8/0xac [ 7.925994] do not call blocking ops when !TASK_RUNNING; state=402 set at [<(ptrval)>] worker_thread+0xb8/0x554 [ 7.936126] Modules linked in: [ 7.939208] CPU: 0 PID: 8 Comm: kworker/0:0H Tainted: G D 5.15.78-rc1 #1 [ 7.947265] Hardware name: Generic DRA74X (Flattened Device Tree) [ 7.953399] Backtrace: ... [ 28.471862] Code: bad PC value [ 28.474945] ---[ end trace 86f7fd8d70b6f700 ]--- [ 28.479614] Fixing recursive fault but reboot is needed!
Test log link, https://lkft.validation.linaro.org/scheduler/job/5826464#L2710 https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.... https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15....
metadata: git_ref: linux-5.15.y git_repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc git_sha: f98185b81e483128439a76d6e64217b606c09bed git_describe: v5.15.77-145-gf98185b81e48 kernel_version: 5.15.78-rc1 kernel-config: https://builds.tuxbuild.com/2HGeIzgM9yCQbFVPZR0ItTY7Nt4/config build-url: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc/-/pipelines/68... artifact-location: https://builds.tuxbuild.com/2HGeIzgM9yCQbFVPZR0ItTY7Nt4 toolchain: gcc-10 build_name: gcc-10-lkftconfig-kselftest-kernel
-- Linaro LKFT https://lkft.linaro.org
On Wed, Nov 9, 2022, at 12:10, Naresh Kamboju wrote:
Following kernel oops found while booting arm 32 bit x15 device with kselftest configs enabled on stable-rc linux-5.15. This is specific to kselftest merge config build booting on arm TI BeagleBoard X15 device.
This is an intermittent issue and not specific to current stable rc release.
I've done an analysis here, and mostly understand the problem, but don't have a good solution yet.
[ 5.414093] PC is at do_page_fault+0x94/0x464 [ 5.418487] LR is at do_translation_fault+0xc0/0xc4 [ 5.423400] pc : [<c15cdbb0>] lr : [<c15ce040>] psr: 20000193
I looked up do_page_fault+0x94/0x464, this is "current->mm":
c15cdb98: e1a0300d mov r3, sp c15cdb9c: e3c33d7f bic r3, r3, #8128 ; 0x1fc0 c15cdba0: e5942040 ldr r2, [r4, #64] ; 0x40 c15cdba4: e3c3303f bic r3, r3, #63 ; 0x3f c15cdba8: e3120080 tst r2, #128 ; 0x80 c15cdbac: e5932008 ldr r2, [r3, #8] c15cdbb0: e5927368 ldr r7, [r2, #872] ; 0x368 <== crash
[ 5.429687] sp : c31ce020 ip : ffffe000 fp : c31ce06c [ 5.434936] r10: 00003b9a r9 : c31ce000 r8 : 00000000 [ 5.440216] r7 : c2110e10 r6 : 00000665 r5 : 00000005 r4 : c31ce0c8 [ 5.446777] r3 : c31ce000 r2 : 00000001 r1 : 2ca6c000 r0 : 00000665
So r3 is the current stack bottom, which holds "current", and it's also the stack pointer, so the entire 8KB stack has been exhausted at this point, and the thread_info been overwritten as a result.
[ 5.530273] Register r12 information: non-paged memory [ 5.535430] Process kworker/0:0H (pid: 8, stack limit = 0x(ptrval)) [ 5.541748] Stack: (0xc31ce020 to 0xc31ce000) [ 5.546142] Backtrace: ... [ 7.896820] Code: e5942040 e3c3303f e3120080 e5932008 (e5927368) [ 7.902954] ---[ end trace 86f7fd8d70b6f6f9 ]---
Unfortunately you have skipped the interesting bit, but I found it in the log download:
[ 5.546142] Backtrace: [ 5.548583] [<c15cdb1c>] (do_page_fault) from [<c15ce040>] (do_translation_fault+0xc0/0xc4) [ 5.557006] r10:00003b9a r9:c31ce000 r8:00000000 r7:c2110e10 r6:c31ce0c8 r5:00000665 [ 5.564880] r4:00000005 [ 5.567413] [<c15cdf80>] (do_translation_fault) from [<c0319c14>] (do_DataAbort+0x4c/0xcc) [ 5.575744] r7:c2110e10 r6:c31ce0c8 r5:00000665 r4:00000005 [ 5.581451] [<c0319bc8>] (do_DataAbort) from [<c0300b2c>] (__dabt_svc+0x4c/0x80) [ 5.588897] Exception stack(0xc31ce0c8 to 0xc31ce110) [ 5.593963] e0c0: 00000000 00000001 c209e5e0 ffffe000 c29e2338 00000000 [ 5.602203] e0e0: c209e5e0 ffffffff 00000000 c219be88 00003b9a c31ce144 c31ce148 c31ce118 [ 5.610412] e100: c0427874 c15c142c 60000193 ffffffff [ 5.615509] r8:00000000 r7:c31ce0fc r6:ffffffff r5:60000193 r4:c15c142c [ 5.622253] [<c15c13bc>] (lock_is_held_type) from [<c0427874>] (timekeeping_advance+0x7dc/0x93c) [ 5.631103] r10:00003b9a r9:ca000000 r8:00000000 r7:00003b9a r6:ca000000 r5:00000000 [ 5.638977] r4:c29e2338 r3:c219bc80 [ 5.642547] [<c0427098>] (timekeeping_advance) from [<c042a720>] (update_wall_time+0x1c/0x2c) [ 5.651153] r10:c2105d44 r9:00000000 r8:00000000 r7:00989680 r6:00000001 r5:c2105d44 [ 5.659027] r4:c29e2ee0 [ 5.661560] [<c042a704>] (update_wall_time) from [<c043b19c>] (tick_do_update_jiffies64+0x210/0x310) [ 5.670776] [<c043af8c>] (tick_do_update_jiffies64) from [<c043b480>] (tick_sched_timer+0xf0/0x100) [ 5.679870] r10:c31ce000 r9:eeb0ba40 r8:eeb0baa0 r7:c31ce430 r6:3ee3574e r5:00000001 [ 5.687744] r4:eeb0bfe0 [ 5.690277] [<c043b390>] (tick_sched_timer) from [<c042436c>] (__hrtimer_run_queues+0x2b8/0x5b4) [ 5.699127] r9:eeb0ba40 r8:eeb0baa0 r7:00000000 r6:c236d9e0 r5:c2108f90 r4:eeb0bfe0 [ 5.706909] [<c04240b4>] (__hrtimer_run_queues) from [<c0425054>] (hrtimer_interrupt+0x148/0x2dc) [ 5.715850] r10:eeb0bb98 r9:eeb0bb58 r8:eeb0bb18 r7:eeb0bb60 r6:eeb0bba0 r5:20000193 [ 5.723724] r4:eeb0ba40 [ 5.726257] [<c0424f0c>] (hrtimer_interrupt) from [<c123bdbc>] (dmtimer_clockevent_interrupt+0x34/0x3c) [ 5.735717] r10:0000001a r9:c318b800 r8:00000000 r7:c2108f90 r6:c31ce000 r5:c31ce000 [ 5.743591] r4:c31af0c0 [ 5.746154] [<c123bd88>] (dmtimer_clockevent_interrupt) from [<c03ee960>] (__handle_irq_event_percpu+0x140/0x380) [ 5.756469] [<c03ee820>] (__handle_irq_event_percpu) from [<c03eec94>] (handle_irq_event+0x6c/0xcc) [ 5.765594] r10:00000064 r9:c31ce430 r8:fa21200c r7:c318b86c r6:c221c994 r5:c31ce000 [ 5.773468] r4:c318b800 [ 5.776000] [<c03eec28>] (handle_irq_event) from [<c03f4120>] (handle_fasteoi_irq+0xac/0x198) [ 5.784606] r7:000000be r6:c221c994 r5:c318b86c r4:c318b800 [ 5.790283] [<c03f4074>] (handle_fasteoi_irq) from [<c03edfe8>] (handle_domain_irq+0x6c/0x88) [ 5.798858] r7:000000be r6:00000000 r5:00000000 r4:c20a5998 [ 5.804565] [<c03edf7c>] (handle_domain_irq) from [<c03018ac>] (gic_handle_irq+0x9c/0xbc) [ 5.812805] r7:c20a59bc r6:fa212000 r5:c221b400 r4:c2109b58 [ 5.818481] [<c0301810>] (gic_handle_irq) from [<c0300bc0>] (__irq_svc+0x60/0x80) [ 5.826019] Exception stack(0xc31ce430 to 0xc31ce478) [ 5.831085] e420: 9af0c982 9af0c982 00000001 0004545b [ 5.839324] e440: 00000000 eeb13440 eeb13450 00000000 c3582dc0 00000001 00000064 c31ce4bc [ 5.847534] e460: c31ce458 c31ce480 c049a668 c03965e4 60000013 ffffffff [ 5.854187] r9:c31ce000 r8:c3582dc0 r7:c31ce464 r6:ffffffff r5:60000013 r4:c03965e4 [ 5.861968] [<c03964f8>] (finish_task_switch) from [<c15c4018>] (__schedule+0x470/0xed0) [ 5.870117] r10:00000064 r9:c2109acc r8:00000000 r7:eeb13450 r6:c3210000 r5:c210e240 [ 5.877990] r4:eeb13440 [ 5.880554] [<c15c3ba8>] (__schedule) from [<c15c4b04>] (schedule+0x8c/0x160) [ 5.887725] r10:00000064 r9:c2108f90 r8:c236d900 r7:c31ce548 r6:c2105d00 r5:c3210000 [ 5.895599] r4:c31ce000 [ 5.898162] [<c15c4a78>] (schedule) from [<c15cbc24>] (schedule_timeout+0xd8/0x254) [ 5.905853] r5:c31ce000 r4:ffff8d4a [ 5.909454] [<c15cbb4c>] (schedule_timeout) from [<c15c56cc>] (do_wait_for_common+0xb0/0x168) [ 5.918060] r10:00000064 r9:c31ce000 r8:00000000 r7:c15cbb4c r6:00000002 r5:c4ca7850 [ 5.925903] r4:c4ca7854 [ 5.928466] [<c15c561c>] (do_wait_for_common) from [<c15c5834>] (wait_for_completion_timeout+0x54/0x68) [ 5.937927] r10:fa0700a4 r9:00000190 r8:00000001 r7:00000000 r6:c4ca7854 r5:00000064 [ 5.945800] r4:c4ca7850 [ 5.948333] [<c15c57e0>] (wait_for_completion_timeout) from [<c1120758>] (omap_i2c_xfer_common+0x430/0x650) [ 5.958160] r7:00000000 r6:00000001 r5:c31ce720 r4:c4ca7840 [ 5.963836] [<c1120328>] (omap_i2c_xfer_common) from [<c11209b4>] (omap_i2c_xfer_irq+0x1c/0x20) [ 5.972595] r10:c2108f40 r9:c2105d00 r8:c31ce714 r7:00000000 r6:00000002 r5:ffff8ce6 [ 5.980468] r4:c4ca78a8 [ 5.983032] [<c1120998>] (omap_i2c_xfer_irq) from [<c1106fe0>] (__i2c_transfer+0x19c/0xa68) [ 5.991424] [<c1106e44>] (__i2c_transfer) from [<c1107958>] (i2c_transfer+0xac/0x148) [ 5.999298] r10:c4e4a888 r9:00000001 r8:c0d55f98 r7:c2108f90 r6:c31ce714 r5:00000002 [ 6.007171] r4:c4ca78a8 [ 6.009735] [<c11078ac>] (i2c_transfer) from [<c0d56008>] (regmap_i2c_read+0x70/0xa0) [ 6.017608] r6:00000001 r5:00000000 r4:c31ce000 [ 6.022247] [<c0d55f98>] (regmap_i2c_read) from [<c0d508f8>] (_regmap_raw_read+0x148/0x440) [ 6.030670] r5:c23723e0 r4:c4eb9c00 [ 6.034271] [<c0d507b0>] (_regmap_raw_read) from [<c0d50c44>] (_regmap_bus_read+0x54/0x80) [ 6.042602] r10:c4e4a888 r9:00000001 r8:c31ce843 r7:c31ce810 r6:c4e7fa41 r5:00000054 [ 6.050476] r4:c4eb9c00 [ 6.053009] [<c0d50bf0>] (_regmap_bus_read) from [<c0d4f2e8>] (_regmap_read+0x74/0x23c) [ 6.061065] r7:c31ce810 r6:c4eb9c00 r5:00000054 r4:c4eb9c00 [ 6.066741] [<c0d4f274>] (_regmap_read) from [<c0d4f4fc>] (regmap_read+0x4c/0x70) [ 6.074279] r10:c4e4a888 r9:00000001 r8:c31ce843 r7:c31ce000 r6:c31ce810 r5:00000054 [ 6.082153] r4:c4eb9c00 [ 6.084716] [<c0d4f4b0>] (regmap_read) from [<c0bcbba4>] (palmas_is_enabled_ldo+0x68/0x8c) [ 6.093048] r7:c31ce000 r6:c31ce83c r5:0000000d r4:c31ce000 [ 6.098724] [<c0bcbb3c>] (palmas_is_enabled_ldo) from [<c0bbb170>] (print_constraints_debug+0x374/0x4b4) [ 6.108276] r5:c4e4a800 r4:00000098 [ 6.111877] [<c0bbadfc>] (print_constraints_debug) from [<c0bbd418>] (set_machine_constraints+0x2cc/0xadc) [ 6.121582] r10:00000000 r9:001b7740 r8:001b7740 r7:c4e8e100 r6:c4e89680 r5:c31ce000 [ 6.129455] r4:c4e4a800 [ 6.132019] [<c0bbd14c>] (set_machine_constraints) from [<c0bbe634>] (regulator_register+0xa0c/0xc8c) [ 6.141296] r10:c362dc40 r9:00000000 r8:00000000 r7:c362ac40 r6:c4e4a800 r5:c31cea90 [ 6.149169] r4:c23804d8 [ 6.151702] [<c0bbdc28>] (regulator_register) from [<c0bc09d4>] (devm_regulator_register+0x5c/0x98) [ 6.160797] r10:c362dc40 r9:00000104 r8:c362dc74 r7:c31cea90 r6:c4ebb010 r5:c31b4cac [ 6.168670] r4:c4e89640 [ 6.171234] [<c0bc0978>] (devm_regulator_register) from [<c0bcd1b8>] (palmas_ldo_registration+0x168/0x510) [ 6.180938] r7:c22e37b4 r6:c22e36d4 r5:0000000d r4:c31b4ca4 [ 6.186645] [<c0bcd050>] (palmas_ldo_registration) from [<c0bccaa8>] (palmas_regulators_probe+0x3ec/0x484) [ 6.196350] r10:c22e37b4 r9:c22e394c r8:00000208 r7:c362dc40 r6:c31b4040 r5:c0bcc238 [ 6.204223] r4:c0bcd050 [ 6.206787] [<c0bcc6bc>] (palmas_regulators_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) [ 6.215545] r10:eeb705b4 r9:c2a12044 r8:0000004d r7:c2382248 r6:c22e35b0 r5:c4ebb010 [ 6.223419] r4:00000000 [ 6.225952] [<c0d291f0>] (platform_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 6.233856] r7:c2382248 r6:c22e35b0 r5:00000000 r4:c4ebb010 [ 6.239532] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 6.248016] r7:c4ebb010 r6:c2382248 r5:c22e35b0 r4:c4ebb010 [ 6.253723] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 6.262725] r9:c2a12044 r8:0000004d r7:c4ebb010 r6:c31cec24 r5:c2a120b4 r4:c2a120b0 [ 6.270507] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 6.279724] r9:c2a12044 r8:00000001 r7:c4ebb010 r6:c31cec24 r5:c22e35b0 r4:00000001 [ 6.287506] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 6.296356] r7:c0d26ae4 r6:c31ce000 r5:c31cec24 r4:00000000 [ 6.302032] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 6.310363] r7:c4ebb0a0 r6:c4ebb010 r5:c31ce000 r4:c4ebb010 [ 6.316040] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 6.324615] r8:c2381fc0 r7:c4eb9020 r6:c4ebb010 r5:c22f8650 r4:c4ebb010 [ 6.331359] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 6.340026] [<c0d24b74>] (bus_probe_device) from [<c0d21db8>] (device_add+0x404/0x970) [ 6.347991] r7:c4eb9020 r6:c31ce000 r5:00000000 r4:c4ebb010 [ 6.353698] [<c0d219b4>] (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) [ 6.361236] r10:00000000 r9:00000001 r8:eeb705fc r7:00000000 r6:00000000 r5:c4eb9020 [ 6.369110] r4:c4ebb000 [ 6.371643] [<c1254b64>] (of_device_add) from [<c12552c4>] (of_platform_device_create_pdata+0xa4/0xd4) [ 6.381011] [<c1255220>] (of_platform_device_create_pdata) from [<c12554fc>] (of_platform_bus_create+0x1e4/0x544) [ 6.391357] r9:00000001 r8:c4eb9020 r7:00000000 r6:c31ce000 r5:00000000 r4:eeb70598 [ 6.399139] [<c1255318>] (of_platform_bus_create) from [<c1255a68>] (of_platform_populate+0xa8/0x144) [ 6.408416] r10:c1d7e250 r9:00000001 r8:c4eb9020 r7:00000000 r6:00000000 r5:eeb70290 [ 6.416290] r4:eeb70598 [ 6.418823] [<c12559c0>] (of_platform_populate) from [<c1255b94>] (devm_of_platform_populate+0x60/0xa8) [ 6.428283] r10:c1d7e250 r9:c183be94 r8:00000002 r7:c4e7abc0 r6:00000000 r5:c4e30240 [ 6.436157] r4:c4eb9020 [ 6.438690] [<c1255b34>] (devm_of_platform_populate) from [<c0d8218c>] (palmas_i2c_probe+0x4a4/0x61c) [ 6.447967] r6:00000000 r5:00000000 r4:c4de0740 [ 6.452606] [<c0d81ce8>] (palmas_i2c_probe) from [<c1106e14>] (i2c_device_probe+0x304/0x334) [ 6.461120] r10:eeb702ac r9:c2a12044 r8:c0d81ce8 r7:c4eb9004 r6:c4eb9000 r5:00000000 [ 6.468994] r4:c4eb9020 [ 6.471527] [<c1106b10>] (i2c_device_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 6.479583] r9:c2a12044 r8:0000004b r7:c2382248 r6:c22ff95c r5:00000000 r4:c4eb9020 [ 6.487365] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 6.495880] r7:c4eb9020 r6:c2382248 r5:c22ff95c r4:c4eb9020 [ 6.501556] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 6.510589] r9:c2a12044 r8:0000004b r7:c4eb9020 r6:c31cef5c r5:c2a120b4 r4:c2a120b0 [ 6.518371] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 6.527557] r9:c2a12044 r8:00000001 r7:c4eb9020 r6:c31cef5c r5:c22ff95c r4:00000001 [ 6.535339] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 6.544189] r7:c0d26ae4 r6:c31ce000 r5:c31cef5c r4:00000000 [ 6.549865] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 6.558197] r7:c4eb90b0 r6:c4eb9020 r5:c31ce000 r4:c4eb9020 [ 6.563873] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 6.572448] r8:c2381fc0 r7:c4ca7950 r6:c4eb9020 r5:c23278cc r4:c4eb9020 [ 6.579193] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 6.587860] [<c0d24b74>] (bus_probe_device) from [<c0d21db8>] (device_add+0x404/0x970) [ 6.595825] r7:c4ca7950 r6:c31ce000 r5:00000000 r4:c4eb9020 [ 6.601531] [<c0d219b4>] (device_add) from [<c0d22348>] (device_register+0x24/0x28) [ 6.609252] r10:c2329274 r9:c4eb9020 r8:c4eb9004 r7:00000000 r6:c4ca78a8 r5:c31cf074 [ 6.617095] r4:c4eb9020 [ 6.619659] [<c0d22324>] (device_register) from [<c1107cbc>] (i2c_new_client_device+0x170/0x2b0) [ 6.628509] r5:c31cf074 r4:c4eb9000 [ 6.632110] [<c1107b4c>] (i2c_new_client_device) from [<c110c1a4>] (of_i2c_register_device+0x8c/0xd0) [ 6.641387] r9:c2392550 r8:c4ca78a8 r7:c4ca7950 r6:eeb70290 r5:c31ce000 r4:00000000 [ 6.649169] [<c110c118>] (of_i2c_register_device) from [<c110c5d8>] (of_i2c_register_devices+0x90/0x104) [ 6.658721] r8:c1dea1d8 r7:c4ca78a8 r6:eeb70018 r5:eeb702f4 r4:eeb70290 [ 6.665435] [<c110c548>] (of_i2c_register_devices) from [<c1108714>] (i2c_register_adapter+0x2d4/0x768) [ 6.674896] r9:c2392550 r8:c2329274 r7:c4ca7950 r6:c2a1e5ac r5:00000000 r4:c4ca78a8 [ 6.682678] [<c1108440>] (i2c_register_adapter) from [<c1108c08>] (__i2c_add_numbered_adapter+0x60/0xa8) [ 6.692230] r10:00000009 r9:00000009 r8:00000000 r7:c4d26010 r6:c31ce000 r5:c4ca78a8 [ 6.700103] r4:00000000 [ 6.702636] [<c1108ba8>] (__i2c_add_numbered_adapter) from [<c1108cf8>] (i2c_add_adapter+0xa8/0xe0) [ 6.711761] r5:c4ca78a8 r4:c4ca7840 [ 6.715332] [<c1108c50>] (i2c_add_adapter) from [<c1108dbc>] (i2c_add_numbered_adapter+0x2c/0x30) [ 6.724273] r5:c4d26000 r4:c4ca7840 [ 6.727874] [<c1108d90>] (i2c_add_numbered_adapter) from [<c111ff04>] (omap_i2c_probe+0x39c/0x710) [ 6.736877] [<c111fb68>] (omap_i2c_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) [ 6.744873] r10:eeb70034 r9:c2a12044 r8:0000004b r7:c2382248 r6:c2329220 r5:c4d26010 [ 6.752716] r4:00000000 [ 6.755279] [<c0d291f0>] (platform_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 6.763153] r7:c2382248 r6:c2329220 r5:00000000 r4:c4d26010 [ 6.768859] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 6.777343] r7:c4d26010 r6:c2382248 r5:c2329220 r4:c4d26010 [ 6.783020] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 6.792053] r9:c2a12044 r8:0000004b r7:c4d26010 r6:c31cf2d4 r5:c2a120b4 r4:c2a120b0 [ 6.799835] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 6.809020] r9:c2a12044 r8:00000001 r7:c4d26010 r6:c31cf2d4 r5:c2329220 r4:00000001 [ 6.816802] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 6.825653] r7:c0d26ae4 r6:c31ce000 r5:c31cf2d4 r4:00000000 [ 6.831329] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 6.839660] r7:c4d260a0 r6:c4d26010 r5:c31ce000 r4:c4d26010 [ 6.845336] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 6.853942] r8:c2381fc0 r7:c4d24810 r6:c4d26010 r5:c22f8650 r4:c4d26010 [ 6.860656] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 6.869323] [<c0d24b74>] (bus_probe_device) from [<c0d21db8>] (device_add+0x404/0x970) [ 6.877319] r7:c4d24810 r6:c31ce000 r5:00000000 r4:c4d26010 [ 6.882995] [<c0d219b4>] (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) [ 6.890533] r10:c2125be0 r9:c2125d40 r8:eeb7007c r7:00000000 r6:00000000 r5:c4d24810 [ 6.898406] r4:c4d26000 [ 6.900939] [<c1254b64>] (of_device_add) from [<c12552c4>] (of_platform_device_create_pdata+0xa4/0xd4) [ 6.910308] [<c1255220>] (of_platform_device_create_pdata) from [<c12554fc>] (of_platform_bus_create+0x1e4/0x544) [ 6.920654] r9:c2125d40 r8:c2125be0 r7:00000000 r6:c31ce000 r5:00000000 r4:eeb70018 [ 6.928436] [<c1255318>] (of_platform_bus_create) from [<c1255a68>] (of_platform_populate+0xa8/0x144) [ 6.937713] r10:0000021f r9:00000001 r8:c4d24810 r7:c2125be0 r6:c1670da0 r5:eeb6fc88 [ 6.945587] r4:eeb70018 [ 6.948120] [<c12559c0>] (of_platform_populate) from [<c09f8e4c>] (sysc_probe+0x1094/0x17b4) [ 6.956634] r10:0000021f r9:c4d24810 r8:00000000 r7:c4d24810 r6:c31ce000 r5:c29fde30 [ 6.964477] r4:c4bf4440 [ 6.967041] [<c09f7db8>] (sysc_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) [ 6.974670] r10:eeb6fca4 r9:c2a12044 r8:0000004b r7:c2382248 r6:c221e450 r5:c4d24810 [ 6.982543] r4:00000000 [ 6.985076] [<c0d291f0>] (platform_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 6.992980] r7:c2382248 r6:c221e450 r5:00000000 r4:c4d24810 [ 6.998657] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 7.007141] r7:c4d24810 r6:c2382248 r5:c221e450 r4:c4d24810 [ 7.012847] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 7.021850] r9:c2a12044 r8:0000004b r7:c4d24810 r6:c31cf5f4 r5:c2a120b4 r4:c2a120b0 [ 7.029632] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 7.038818] r9:c2a12044 r8:00000001 r7:c4d24810 r6:c31cf5f4 r5:c221e450 r4:00000001 [ 7.046600] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 7.055450] r7:c0d26ae4 r6:c31ce000 r5:c31cf5f4 r4:00000000 [ 7.061157] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 7.069458] r7:c4d248a0 r6:c4d24810 r5:c31ce000 r4:c4d24810 [ 7.075164] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 7.083740] r8:c2381fc0 r7:c4eb6010 r6:c4d24810 r5:c22f8650 r4:c4d24810 [ 7.090454] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 7.099121] [<c0d24b74>] (bus_probe_device) from [<c0d21db8>] (device_add+0x404/0x970) [ 7.107116] r7:c4eb6010 r6:c31ce000 r5:00000000 r4:c4d24810 [ 7.112792] [<c0d219b4>] (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) [ 7.120330] r10:c2125be0 r9:c2125d40 r8:eeb6fcec r7:c2125d6c r6:00000000 r5:c4eb6010 [ 7.128204] r4:c4d24800 [ 7.130737] [<c1254b64>] (of_device_add) from [<c12552c4>] (of_platform_device_create_pdata+0xa4/0xd4) [ 7.140106] [<c1255220>] (of_platform_device_create_pdata) from [<c12554fc>] (of_platform_bus_create+0x1e4/0x544) [ 7.150451] r9:c2125d40 r8:c2125d10 r7:00000000 r6:c31ce000 r5:00000000 r4:eeb6fc88 [ 7.158233] [<c1255318>] (of_platform_bus_create) from [<c1255a68>] (of_platform_populate+0xa8/0x144) [ 7.167510] r10:00000000 r9:00000001 r8:c4eb6010 r7:c2125be0 r6:00000000 r5:eeb68c24 [ 7.175384] r4:eeb6fc88 [ 7.177917] [<c12559c0>] (of_platform_populate) from [<c09f5dd4>] (simple_pm_bus_probe+0xb4/0xd8) [ 7.186859] r10:eeb68c40 r9:c2a12044 r8:0000002c r7:c2382248 r6:c2125be0 r5:eeb68c24 [ 7.194732] r4:c4eb6010 [ 7.197265] [<c09f5d20>] (simple_pm_bus_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) [ 7.205688] r7:c2382248 r6:c221e3dc r5:c4eb6010 r4:00000000 [ 7.211364] [<c0d291f0>] (platform_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 7.219238] r7:c2382248 r6:c221e3dc r5:00000000 r4:c4eb6010 [ 7.224945] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 7.233428] r7:c4eb6010 r6:c2382248 r5:c221e3dc r4:c4eb6010 [ 7.239135] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 7.248138] r9:c2a12044 r8:0000002c r7:c4eb6010 r6:c31cf8bc r5:c2a120b4 r4:c2a120b0 [ 7.255920] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 7.265106] r9:c2a12044 r8:00000001 r7:c4eb6010 r6:c31cf8bc r5:c221e3dc r4:00000001 [ 7.272918] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 7.281738] r7:c0d26ae4 r6:c31ce000 r5:c31cf8bc r4:00000000 [ 7.287445] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 7.295745] r7:c4eb60a0 r6:c4eb6010 r5:c31ce000 r4:c4eb6010 [ 7.301452] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 7.310028] r8:c2381fc0 r7:c4eb4410 r6:c4eb6010 r5:c22f8650 r4:c4eb6010 [ 7.316772] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 7.325439] [<c0d24b74>] (bus_probe_device) from [<c0d21db8>] (device_add+0x404/0x970) [ 7.333404] r7:c4eb4410 r6:c31ce000 r5:00000000 r4:c4eb6010 [ 7.339080] [<c0d219b4>] (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) [ 7.346618] r10:c2125be0 r9:c2125d00 r8:eeb68c88 r7:c2125be0 r6:00000000 r5:c4eb4410 [ 7.354492] r4:c4eb6000 [ 7.357055] [<c1254b64>] (of_device_add) from [<c12552c4>] (of_platform_device_create_pdata+0xa4/0xd4) [ 7.366394] [<c1255220>] (of_platform_device_create_pdata) from [<c12554fc>] (of_platform_bus_create+0x1e4/0x544) [ 7.376739] r9:c2125d00 r8:c2125be0 r7:00000000 r6:c31ce000 r5:00000000 r4:eeb68c24 [ 7.384521] [<c1255318>] (of_platform_bus_create) from [<c1255a68>] (of_platform_populate+0xa8/0x144) [ 7.393798] r10:eeb6892c r9:00000001 r8:c4eb4410 r7:c2125be0 r6:00000000 r5:eeb68910 [ 7.401672] r4:eeb68c24 [ 7.404205] [<c12559c0>] (of_platform_populate) from [<c09f5dd4>] (simple_pm_bus_probe+0xb4/0xd8) [ 7.413146] r10:eeb6892c r9:c2a12044 r8:0000002c r7:c2382248 r6:c2125be0 r5:eeb68910 [ 7.421020] r4:c4eb4410 [ 7.423553] [<c09f5d20>] (simple_pm_bus_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) [ 7.431976] r7:c2382248 r6:c221e3dc r5:c4eb4410 r4:00000000 [ 7.437652] [<c0d291f0>] (platform_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 7.445556] r7:c2382248 r6:c221e3dc r5:00000000 r4:c4eb4410 [ 7.451232] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 7.459716] r7:c4eb4410 r6:c2382248 r5:c221e3dc r4:c4eb4410 [ 7.465423] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 7.474426] r9:c2a12044 r8:0000002c r7:c4eb4410 r6:c31cfb84 r5:c2a120b4 r4:c2a120b0 [ 7.482208] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 7.491394] r9:c2a12044 r8:00000001 r7:c4eb4410 r6:c31cfb84 r5:c221e3dc r4:00000001 [ 7.499176] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 7.508026] r7:c0d26ae4 r6:c31ce000 r5:c31cfb84 r4:00000000 [ 7.513732] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 7.522033] r7:c4eb44a0 r6:c4eb4410 r5:c31ce000 r4:c4eb4410 [ 7.527709] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 7.536315] r8:c2381fc0 r7:c330a410 r6:c4eb4410 r5:c22f8650 r4:c4eb4410 [ 7.543029] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 7.551696] [<c0d24b74>] (bus_probe_device) from [<c0d21db8>] (device_add+0x404/0x970) [ 7.559692] r7:c330a410 r6:c31ce000 r5:00000000 r4:c4eb4410 [ 7.565368] [<c0d219b4>] (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) [ 7.572906] r10:c2125be0 r9:c2125d40 r8:eeb68974 r7:c2125be0 r6:00000000 r5:c330a410 [ 7.580780] r4:c4eb4400 [ 7.583312] [<c1254b64>] (of_device_add) from [<c12552c4>] (of_platform_device_create_pdata+0xa4/0xd4) [ 7.592681] [<c1255220>] (of_platform_device_create_pdata) from [<c12554fc>] (of_platform_bus_create+0x1e4/0x544) [ 7.603027] r9:c2125d40 r8:c2125d00 r7:00000000 r6:c31ce000 r5:00000000 r4:eeb68910 [ 7.610809] [<c1255318>] (of_platform_bus_create) from [<c1255a68>] (of_platform_populate+0xa8/0x144) [ 7.620086] r10:00000000 r9:00000001 r8:c330a410 r7:c2125be0 r6:00000000 r5:eeb32944 [ 7.627960] r4:eeb68910 [ 7.630493] [<c12559c0>] (of_platform_populate) from [<c09f5dd4>] (simple_pm_bus_probe+0xb4/0xd8) [ 7.639434] r10:c330a410 r9:c1d718b8 r8:00000001 r7:c2382248 r6:c2125be0 r5:eeb32944 [ 7.647308] r4:c330a410 [ 7.649841] [<c09f5d20>] (simple_pm_bus_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) [ 7.658264] r7:c2382248 r6:c221e3dc r5:c330a410 r4:00000000 [ 7.663940] [<c0d291f0>] (platform_probe) from [<c0d25e80>] (really_probe+0xe8/0x4a0) [ 7.671813] r7:c2382248 r6:c221e3dc r5:00000000 r4:c330a410 [ 7.677520] [<c0d25d98>] (really_probe) from [<c0d262e8>] (__driver_probe_device+0xb0/0x214) [ 7.686004] r7:c330a410 r6:c2382248 r5:c221e3dc r4:c330a410 [ 7.691680] [<c0d26238>] (__driver_probe_device) from [<c0d26490>] (driver_probe_device+0x44/0xd4) [ 7.700714] r9:c1d718b8 r8:00000001 r7:c330a410 r6:c31cfe4c r5:c2a120b4 r4:c2a120b0 [ 7.708496] [<c0d2644c>] (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) [ 7.717681] r9:c1d718b8 r8:00000001 r7:c330a410 r6:c31cfe4c r5:c221e3dc r4:00000001 [ 7.725463] [<c0d26ae4>] (__device_attach_driver) from [<c0d236bc>] (bus_for_each_drv+0x94/0xd8) [ 7.734313] r7:c0d26ae4 r6:c31ce000 r5:c31cfe4c r4:00000000 [ 7.739990] [<c0d23628>] (bus_for_each_drv) from [<c0d2678c>] (__device_attach+0xc4/0x224) [ 7.748321] r7:c330a4a0 r6:c330a410 r5:c31ce000 r4:c330a410 [ 7.753997] [<c0d266c8>] (__device_attach) from [<c0d26e30>] (device_initial_probe+0x1c/0x20) [ 7.762603] r8:00000000 r7:c2382248 r6:c330a410 r5:c22f8650 r4:c3487df4 [ 7.769317] [<c0d26e14>] (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) [ 7.777984] [<c0d24b74>] (bus_probe_device) from [<c0d2566c>] (deferred_probe_work_func+0xb8/0x100) [ 7.787109] r7:c2382248 r6:c22f8238 r5:c22f8178 r4:c3487df4 [ 7.792785] [<c0d255b4>] (deferred_probe_work_func) from [<c037d4e0>] (process_one_work+0x298/0x7dc) [ 7.802001] r10:c2108f90 r9:c31ce000 r8:c236d0c0 r7:c3114000 r6:c3110000 r5:c31e3000 [ 7.809875] r4:c22f81e8 r3:c0d255b4 [ 7.813446] [<c037d248>] (process_one_work) from [<c037da90>] (worker_thread+0x6c/0x554) [ 7.821594] r10:00000088 r9:c31ce000 r8:c2105d00 r7:c3110038 r6:c31e3018 r5:c3110000 [ 7.829467] r4:c31e3000 [ 7.832031] [<c037da24>] (worker_thread) from [<c0388000>] (kthread+0x16c/0x190) [ 7.839477] r10:c31e30c0 r9:c31bfe2c r8:c31e3000 r7:c037da24 r6:c31e3080 r5:c31ce000 [ 7.847351] r4:c31df180 [ 7.849884] [<c0387e94>] (kthread) from [<c030015c>] (ret_from_fork+0x14/0x38) [ 7.857177] Exception stack(0xc31cffb0 to 0xc31cfff8) [ 7.862243] ffa0: 00000000 00000000 00000000 00000000 [ 7.870483] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.878692] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 7.885345] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0387e94 [ 7.893218] r4:c31df180 r3:c31ce000 [ 7.896820] Code: e5942040 e3c3303f e3120080 e5932008 (e5927368) [ 7.902954] ---[ end trace 86f7fd8d70b6f6f9 ]---
Stripping that down for readability, I can see that this happens while processing timer interrupts (without IRQ stacks, because 5.15 didn't have them on arch/arm) in a deeply (6 levels) nested device probe where one probe() function adds the child device:
(do_page_fault) from [<c15ce040>] (do_translation_fault+0xc0/0xc4) (do_translation_fault) from [<c0319c14>] (do_DataAbort+0x4c/0xcc) (do_DataAbort) from [<c0300b2c>] (__dabt_svc+0x4c/0x80) (lock_is_held_type) from [<c0427874>] (timekeeping_advance+0x7dc/0x93c) (timekeeping_advance) from [<c042a720>] (update_wall_time+0x1c/0x2c) (tick_sched_timer) from [<c042436c>] (__hrtimer_run_queues+0x2b8/0x5b4) (gic_handle_irq) from [<c0300bc0>] (__irq_svc+0x60/0x80) (schedule_timeout) from [<c15c56cc>] (do_wait_for_common+0xb0/0x168) (do_wait_for_common) from [<c15c5834>] (wait_for_completion_timeout+0x54/0x68) (i2c_transfer) from [<c0d56008>] (regmap_i2c_read+0x70/0xa0) (regmap_i2c_read) from [<c0d508f8>] (_regmap_raw_read+0x148/0x440) (palmas_is_enabled_ldo) from [<c0bbb170>] (print_constraints_debug+0x374/0x4b4) (print_constraints_debug) from [<c0bbd418>] (set_machine_constraints+0x2cc/0xadc) (set_machine_constraints) from [<c0bbe634>] (regulator_register+0xa0c/0xc8c) (regulator_register) from [<c0bc09d4>] (devm_regulator_register+0x5c/0x98) (palmas_regulators_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) (devm_of_platform_populate) from [<c0d8218c>] (palmas_i2c_probe+0x4a4/0x61c) (palmas_i2c_probe) from [<c1106e14>] (i2c_device_probe+0x304/0x334) (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) (device_add) from [<c0d22348>] (device_register+0x24/0x28) (i2c_register_adapter) from [<c1108c08>] (__i2c_add_numbered_adapter+0x60/0xa8) (omap_i2c_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) (sysc_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) (simple_pm_bus_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) (driver_probe_device) from [<c0d26ba0>] (__device_attach_driver+0xbc/0x138) (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) (simple_pm_bus_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) (device_add) from [<c1254ba8>] (of_device_add+0x44/0x4c) (simple_pm_bus_probe) from [<c0d2925c>] (platform_probe+0x6c/0xc8) (device_initial_probe) from [<c0d24c0c>] (bus_probe_device+0x98/0xa0) (worker_thread) from [<c0388000>] (kthread+0x16c/0x190)
Most of these functions are probably fine by themselves, there are just so many of them that it overruns the stack in the end.
One thing that sticks out is the print_constraints_debug() function in the regulator framework, which uses a larger-than-average stack to hold a string buffer, and then calls into the low-level driver to get the actual data (regulator_get_voltage_rdev, _regulator_is_enabled). Splitting the device access out into a different function from the string handling might reduce the stack usage enough to stay just under the 8KB limit, though it's probably not a complete fix. I added the regulator maintainers to Cc for thoughts on this.
Enabling both IRQ stacks and VMAP_STACK on mainline kernels would at least make this easier to identify, but neither of those are available on 5.15.
Is there a way to tell the driver core to intentionally defer device probing when a new device gets added inside of a probe() function? I don't think we can change the default behavior this fundamentally without causing regressions, but if there is a compile-time or boot-time flag to change it, that may be enough to avoid the specific problem on the X15 test setup.
Arnd
On Wed, Nov 9, 2022, at 13:57, Arnd Bergmann wrote:
One thing that sticks out is the print_constraints_debug() function in the regulator framework, which uses a larger-than-average stack to hold a string buffer, and then calls into the low-level driver to get the actual data (regulator_get_voltage_rdev, _regulator_is_enabled). Splitting the device access out into a different function from the string handling might reduce the stack usage enough to stay just under the 8KB limit, though it's probably not a complete fix. I added the regulator maintainers to Cc for thoughts on this.
I checked the stack usage for each of the 147 functions in the backtrace, and as I was guessing print_constraints_debug() is the largest, but it's still only 168 bytes, and everything else is smaller, so no point hacking this.
168 print_constraints_debug 96 timekeeping_advance 64 set_machine_constraints 64 of_i2c_register_device 56 of_platform_bus_create 48 schedule_timeout
One more idea I had is the unwinder: since this kernel is built with the frame-pointer unwinder, I think the stack usage per function is going to be slightly larger than with the arm unwinder.
Naresh, how hard is it to reproduce this bug intentionally? Can you try if it still happens if you change the .config to use these:?
# CONFIG_FUNCTION_GRAPH_TRACER is not set # CONFIG_UNWINDER_FRAME_POINTER is not set CONFIG_UNWINDER_ARM=y
Arnd
On Wed, Nov 9, 2022 at 2:20 PM Arnd Bergmann arnd@arndb.de wrote:
On Wed, Nov 9, 2022, at 13:57, Arnd Bergmann wrote:
One thing that sticks out is the print_constraints_debug() function in the regulator framework, which uses a larger-than-average stack to hold a string buffer, and then calls into the low-level driver to get the actual data (regulator_get_voltage_rdev, _regulator_is_enabled). Splitting the device access out into a different function from the string handling might reduce the stack usage enough to stay just under the 8KB limit, though it's probably not a complete fix. I added the regulator maintainers to Cc for thoughts on this.
I checked the stack usage for each of the 147 functions in the backtrace, and as I was guessing print_constraints_debug() is the largest, but it's still only 168 bytes, and everything else is smaller, so no point hacking this.
You mentioned that we are doing probing of a device 6 levels deep. Could one of the parent devices be marked for an asynchronous probe thus breaking the chain?
Thanks.
On Fri, Nov 11, 2022, at 01:48, Dmitry Torokhov wrote:
On Wed, Nov 9, 2022 at 2:20 PM Arnd Bergmann arnd@arndb.de wrote:
On Wed, Nov 9, 2022, at 13:57, Arnd Bergmann wrote:
One thing that sticks out is the print_constraints_debug() function in the regulator framework, which uses a larger-than-average stack to hold a string buffer, and then calls into the low-level driver to get the actual data (regulator_get_voltage_rdev, _regulator_is_enabled). Splitting the device access out into a different function from the string handling might reduce the stack usage enough to stay just under the 8KB limit, though it's probably not a complete fix. I added the regulator maintainers to Cc for thoughts on this.
I checked the stack usage for each of the 147 functions in the backtrace, and as I was guessing print_constraints_debug() is the largest, but it's still only 168 bytes, and everything else is smaller, so no point hacking this.
You mentioned that we are doing probing of a device 6 levels deep. Could one of the parent devices be marked for an asynchronous probe thus breaking the chain?
Ah right, I forgot that we already have a per-driver flag for this, thanks a lot for the suggestion!
This means it might be as easy as this oneliner, picking one of the drivers in the middle of the call chain that is not shared across too many other systems:
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index 8b7429bd2e3e..f4a96eb98eea 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -731,6 +731,7 @@ static struct i2c_driver palmas_i2c_driver = { .driver = { .name = "palmas", .of_match_table = of_palmas_match_tbl, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = palmas_i2c_probe, .remove = palmas_i2c_remove,
There is still a small regression risk for other OMAP platforms that may rely on probe ordering, but it should reliably fix the issue.
There is a related idea that I'll try to take another look at: since the bug only happens sometimes, and not at all on mainline kernels with IRQ_STACK, I had the idea of making the kernel stack size runtime configurable on mainline kernels, by reserving a fixed amount of the 8KB total. This should make it possible to narrow down the actual maximum stack usage before a guaranteed crash, and then validate that a fix correctly addresses it.
Arnd
Hi Arnd,
On Thu, 10 Nov 2022 at 03:33, Arnd Bergmann arnd@arndb.de wrote:
On Wed, Nov 9, 2022, at 13:57, Arnd Bergmann wrote:
One thing that sticks out is the print_constraints_debug() function in the regulator framework, which uses a larger-than-average stack to hold a string buffer, and then calls into the low-level driver to get the actual data (regulator_get_voltage_rdev, _regulator_is_enabled). Splitting the device access out into a different function from the string handling might reduce the stack usage enough to stay just under the 8KB limit, though it's probably not a complete fix. I added the regulator maintainers to Cc for thoughts on this.
I checked the stack usage for each of the 147 functions in the backtrace, and as I was guessing print_constraints_debug() is the largest, but it's still only 168 bytes, and everything else is smaller, so no point hacking this.
168 print_constraints_debug 96 timekeeping_advance 64 set_machine_constraints 64 of_i2c_register_device 56 of_platform_bus_create 48 schedule_timeout
One more idea I had is the unwinder: since this kernel is built with the frame-pointer unwinder, I think the stack usage per function is going to be slightly larger than with the arm unwinder.
Naresh, how hard is it to reproduce this bug intentionally? Can you try if it still happens if you change the .config to use these:?
# CONFIG_FUNCTION_GRAPH_TRACER is not set # CONFIG_UNWINDER_FRAME_POINTER is not set CONFIG_UNWINDER_ARM=y
I have done this experiment and reported crash not reproduced after eight rounds of testing [1].
https://lkft.validation.linaro.org/scheduler/job/5835922#L1993
Arnd
- Naresh
On Fri, Nov 11, 2022, at 07:28, Naresh Kamboju wrote:
On Thu, 10 Nov 2022 at 03:33, Arnd Bergmann arnd@arndb.de wrote:
One more idea I had is the unwinder: since this kernel is built with the frame-pointer unwinder, I think the stack usage per function is going to be slightly larger than with the arm unwinder.
Naresh, how hard is it to reproduce this bug intentionally? Can you try if it still happens if you change the .config to use these:?
# CONFIG_FUNCTION_GRAPH_TRACER is not set # CONFIG_UNWINDER_FRAME_POINTER is not set CONFIG_UNWINDER_ARM=y
I have done this experiment and reported crash not reproduced after eight rounds of testing [1].
https://lkft.validation.linaro.org/scheduler/job/5835922#L1993
Ok, good to hear. In this case, I see three possible ways forward to prevent this from coming back on your system:
a) use asynchronous probing for one or more of the drivers as Dmitry suggested. This means fixing it upstream first and then backporting the fix to all stable kernels. We should probably do this anyway, but this will need more testing on your side.
b) Change your kernel config permanently with the options above, if LKFT does not actually rely on CONFIG_FUNCTION_GRAPH_TRACER. I don't know if it does.
c) backport commit 41918ec82eb6 ("ARM: ftrace: enable the graph tracer with the EABI unwinder") from 5.17. This was part of a longer series from Ard, and while the patch itself looks simple enough to be backported, I suspect we'd have to backport the entire series, which is probably not going to be realistic. Ard, any comments on this?
Arnd
On Fri, 11 Nov 2022 at 09:45, Arnd Bergmann arnd@arndb.de wrote:
On Fri, Nov 11, 2022, at 07:28, Naresh Kamboju wrote:
On Thu, 10 Nov 2022 at 03:33, Arnd Bergmann arnd@arndb.de wrote:
One more idea I had is the unwinder: since this kernel is built with the frame-pointer unwinder, I think the stack usage per function is going to be slightly larger than with the arm unwinder.
Naresh, how hard is it to reproduce this bug intentionally? Can you try if it still happens if you change the .config to use these:?
# CONFIG_FUNCTION_GRAPH_TRACER is not set # CONFIG_UNWINDER_FRAME_POINTER is not set CONFIG_UNWINDER_ARM=y
I have done this experiment and reported crash not reproduced after eight rounds of testing [1].
https://lkft.validation.linaro.org/scheduler/job/5835922#L1993
Ok, good to hear. In this case, I see three possible ways forward to prevent this from coming back on your system:
a) use asynchronous probing for one or more of the drivers as Dmitry suggested. This means fixing it upstream first and then backporting the fix to all stable kernels. We should probably do this anyway, but this will need more testing on your side.
b) Change your kernel config permanently with the options above, if LKFT does not actually rely on CONFIG_FUNCTION_GRAPH_TRACER. I don't know if it does.
c) backport commit 41918ec82eb6 ("ARM: ftrace: enable the graph tracer with the EABI unwinder") from 5.17. This was part of a longer series from Ard, and while the patch itself looks simple enough to be backported, I suspect we'd have to backport the entire series, which is probably not going to be realistic. Ard, any comments on this?
It at least needs the preceding patch, which tracks the location of LR on the stack when using CONFIG_UNWINDER_ARM.
But I'd take the whole series for good measure.
linux-stable-mirror@lists.linaro.org
-
Ard Biesheuvel -
Arnd Bergmann -
Dmitry Torokhov -
Naresh Kamboju