The patch below does not apply to the 5.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b0b33b048dcfbd7da82c3cde4fab02751dfab4d6 Mon Sep 17 00:00:00 2001

From: Vladimir Oltean vladimir.oltean@nxp.com Date: Tue, 13 Jul 2021 12:37:19 +0300 Subject: [PATCH] net: dsa: sja1105: fix address learning getting disabled on the CPU port

In May 2019 when commit 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol") was introduced, the comment that "STP does not get called for the CPU port" was true. This changed after commit 0394a63acfe2 ("net: dsa: enable and disable all ports") in August 2019 and went largely unnoticed, because the sja1105_bridge_stp_state_set() method did nothing different compared to the static setup done by sja1105_init_mac_settings().

With the ability to turn address learning off introduced by the blamed commit, there is a new priv->learn_ena port mask in the driver. When sja1105_bridge_stp_state_set() gets called and we are in BR_STATE_LEARNING or later, address learning is enabled or not depending on priv->learn_ena & BIT(port).

So what happens is that priv->learn_ena is not being set from anywhere for the CPU port, and the static configuration done by sja1105_init_mac_settings() is being overwritten.

To solve this, acknowledge that the static configuration of STP state is no longer necessary because the STP state is being set by the DSA core now, but what is necessary is to set priv->learn_ena for the CPU port.

Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: David S. Miller davem@davemloft.net

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 4f0545605f6b..ced8c9cb29c2 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -122,14 +122,12 @@ static int sja1105_init_mac_settings(struct sja1105_private *priv)

for (i = 0; i < ds->num_ports; i++) { mac[i] = default_mac; - if (i == dsa_upstream_port(priv->ds, i)) { - /* STP doesn't get called for CPU port, so we need to - * set the I/O parameters statically. - */ - mac[i].dyn_learn = true; - mac[i].ingress = true; - mac[i].egress = true; - } + + /* Let sja1105_bridge_stp_state_set() keep address learning + * enabled for the CPU port. + */ + if (dsa_is_cpu_port(ds, i)) + priv->learn_ena |= BIT(i); }

return 0;