This is a note to let you know that I've just added the patch titled

usb: dwc3: gadget: Stop EP0 transfers during pullup disable

to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 4a1e25c0a029b97ea4a3d423a6392bfacc3b2e39 Mon Sep 17 00:00:00 2001

From: Wesley Cheng wcheng@codeaurora.org Date: Tue, 24 Aug 2021 21:28:55 -0700 Subject: usb: dwc3: gadget: Stop EP0 transfers during pullup disable

During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error:

dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete.

Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage.

Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: stable@vger.kernel.org Reviewed-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Acked-by: Felipe Balbi balbi@kernel.org Signed-off-by: Wesley Cheng wcheng@codeaurora.org Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/gadget.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 1e6ddbc986ba..ccb68fe6202e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2243,10 +2243,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)

ret = wait_for_completion_timeout(&dwc->ep0_in_setup, msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT)); - if (ret == 0) { - dev_err(dwc->dev, "timed out waiting for SETUP phase\n"); - return -ETIMEDOUT; - } + if (ret == 0) + dev_warn(dwc->dev, "timed out waiting for SETUP phase\n"); }

/* @@ -2458,6 +2456,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* begin to receive SETUP packets */ dwc->ep0state = EP0_SETUP_PHASE; dwc->link_state = DWC3_LINK_STATE_SS_DIS; + dwc->delayed_status = false; dwc3_ep0_out_start(dwc);

dwc3_gadget_enable_irq(dwc);