The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 0c50b7fcf2773b4853e83fc15aba1a196ba95966 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024061236-vanity-bankbook-d9dc@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

0c50b7fcf277 ("firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0c50b7fcf2773b4853e83fc15aba1a196ba95966 Mon Sep 17 00:00:00 2001 From: Gabor Juhos j4g8y7@gmail.com Date: Mon, 4 Mar 2024 14:14:53 +0100 Subject: [PATCH] firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails

There are several functions which are calling qcom_scm_bw_enable() then returns immediately if the call fails and leaves the clocks enabled.

Change the code of these functions to disable clocks when the qcom_scm_bw_enable() call fails. This also fixes a possible dma buffer leak in the qcom_scm_pas_init_image() function.

Compile tested only due to lack of hardware with interconnect support.

Cc: stable@vger.kernel.org Fixes: 65b7ebda5028 ("firmware: qcom_scm: Add bw voting support to the SCM interface") Signed-off-by: Gabor Juhos j4g8y7@gmail.com Reviewed-by: Mukesh Ojha quic_mojha@quicinc.com Link: https://lore.kernel.org/r/20240304-qcom-scm-disable-clk-v1-1-b36e51577ca1@gm... Signed-off-by: Bjorn Andersson andersson@kernel.org

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 520de9b5633a..e8460626fb0c 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -569,13 +569,14 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,

ret = qcom_scm_bw_enable(); if (ret) - return ret; + goto disable_clk;

desc.args[1] = mdata_phys;

ret = qcom_scm_call(__scm->dev, &desc, &res); - qcom_scm_bw_disable(); + +disable_clk: qcom_scm_clk_disable();

out: @@ -637,10 +638,12 @@ int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)

ret = qcom_scm_bw_enable(); if (ret) - return ret; + goto disable_clk;

ret = qcom_scm_call(__scm->dev, &desc, &res); qcom_scm_bw_disable(); + +disable_clk: qcom_scm_clk_disable();

return ret ? : res.result[0]; @@ -672,10 +675,12 @@ int qcom_scm_pas_auth_and_reset(u32 peripheral)

ret = qcom_scm_bw_enable(); if (ret) - return ret; + goto disable_clk;

ret = qcom_scm_call(__scm->dev, &desc, &res); qcom_scm_bw_disable(); + +disable_clk: qcom_scm_clk_disable();

return ret ? : res.result[0]; @@ -706,11 +711,12 @@ int qcom_scm_pas_shutdown(u32 peripheral)

ret = qcom_scm_bw_enable(); if (ret) - return ret; + goto disable_clk;

ret = qcom_scm_call(__scm->dev, &desc, &res); - qcom_scm_bw_disable(); + +disable_clk: qcom_scm_clk_disable();

return ret ? : res.result[0];