The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025101601-manicure-opposite-4330@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer sean@geanix.com Date: Mon, 1 Sep 2025 09:49:13 +0200 Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup

Rework the power management in inv_icm42600_core_probe() to use devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM setup by handling activation and enabling in one step. Remove the separate inv_icm42600_disable_pm callback, as it's no longer needed with the devm-managed approach. Using devm_pm_runtime_enable() also fixes the missing disable of autosuspend. Update inv_icm42600_disable_vddio_reg() to only disable the regulator if the device is not suspended i.e. powered-down, preventing unbalanced disables. Also remove redundant error msg on regulator_disable(), the regulator framework already emits an error message when regulator_disable() fails.

This simplifies the PM setup and avoids manipulating the usage counter unnecessarily.

Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver") Signed-off-by: Sean Nyekjaer sean@geanix.com Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com

diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c index a4d42e7e2180..76d8e4f14d87 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c @@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data) static void inv_icm42600_disable_vddio_reg(void *_data) { struct inv_icm42600_state *st = _data; - const struct device *dev = regmap_get_device(st->map); - int ret; + struct device *dev = regmap_get_device(st->map);

- ret = regulator_disable(st->vddio_supply); - if (ret) - dev_err(dev, "failed to disable vddio error %d\n", ret); -} + if (pm_runtime_status_suspended(dev)) + return;

-static void inv_icm42600_disable_pm(void *_data) -{ - struct device *dev = _data; - - pm_runtime_put_sync(dev); - pm_runtime_disable(dev); + regulator_disable(st->vddio_supply); }

int inv_icm42600_core_probe(struct regmap *regmap, int chip, @@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip, return ret;

/* setup runtime power management */ - ret = pm_runtime_set_active(dev); + ret = devm_pm_runtime_set_active_enabled(dev); if (ret) return ret; - pm_runtime_get_noresume(dev); - pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(dev); - pm_runtime_put(dev);

- return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev); + return ret; } EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");