From: Ido Schimmel idosch@nvidia.com

[ Upstream commit 7f6f32bb7d3355cd78ebf1dece9a6ea7a0ca8158 ]

fib_info_notify_update() is always called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB table list is traversed with hlist_for_each_entry_rcu(), but without a proper lockdep expression.

Since modification of the list is protected by RTNL, silence the warning by adding a lockdep expression which verifies RTNL is held.

[1] ============================= WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted ----------------------------- net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/834: #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0

stack backtrace: CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x143/0x14d fib_info_notify_update+0x8d1/0xa60 __nexthop_replace_notify+0xd2/0x290 rtm_new_nexthop+0x35e2/0x5946 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fde28c3be57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57 RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003 RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020

Fixes: 1bff1a0c9bbd ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel idosch@nvidia.com Reviewed-by: David Ahern dsahern@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/fib_trie.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2010,7 +2010,8 @@ void fib_info_notify_update(struct net * struct hlist_head *head = &net->ipv4.fib_table_hash[h]; struct fib_table *tb;

- hlist_for_each_entry_rcu(tb, head, tb_hlist) + hlist_for_each_entry_rcu(tb, head, tb_hlist, + lockdep_rtnl_is_held()) __fib_info_notify_update(net, tb, info); } }

From: Paul Moore paul@paul-moore.com

[ Upstream commit d3b990b7f327e2afa98006e7666fb8ada8ed8683 ]

This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise.

The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite.

The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat).

Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley stephen.smalley.work@gmail.com Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/netlabel/netlabel_domainhash.c | 59 ++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 29 deletions(-)

--- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -85,6 +85,7 @@ static void netlbl_domhsh_free_entry(str kfree(netlbl_domhsh_addr6_entry(iter6)); } #endif /* IPv6 */ + kfree(ptr->def.addrsel); } kfree(ptr->domain); kfree(ptr); @@ -536,6 +537,8 @@ int netlbl_domhsh_add(struct netlbl_dom_ goto add_return; } #endif /* IPv6 */ + /* cleanup the new entry since we've moved everything over */ + netlbl_domhsh_free_entry(&entry->rcu); } else ret_val = -EINVAL;

@@ -579,6 +582,12 @@ int netlbl_domhsh_remove_entry(struct ne { int ret_val = 0; struct audit_buffer *audit_buf; + struct netlbl_af4list *iter4; + struct netlbl_domaddr4_map *map4; +#if IS_ENABLED(CONFIG_IPV6) + struct netlbl_af6list *iter6; + struct netlbl_domaddr6_map *map6; +#endif /* IPv6 */

if (entry == NULL) return -ENOENT; @@ -596,6 +605,9 @@ int netlbl_domhsh_remove_entry(struct ne ret_val = -ENOENT; spin_unlock(&netlbl_domhsh_lock);

+ if (ret_val) + return ret_val; + audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info); if (audit_buf != NULL) { audit_log_format(audit_buf, @@ -605,40 +617,29 @@ int netlbl_domhsh_remove_entry(struct ne audit_log_end(audit_buf); }

- if (ret_val == 0) { - struct netlbl_af4list *iter4; - struct netlbl_domaddr4_map *map4; -#if IS_ENABLED(CONFIG_IPV6) - struct netlbl_af6list *iter6; - struct netlbl_domaddr6_map *map6; -#endif /* IPv6 */ - - switch (entry->def.type) { - case NETLBL_NLTYPE_ADDRSELECT: - netlbl_af4list_foreach_rcu(iter4, - &entry->def.addrsel->list4) { - map4 = netlbl_domhsh_addr4_entry(iter4); - cipso_v4_doi_putdef(map4->def.cipso); - } + switch (entry->def.type) { + case NETLBL_NLTYPE_ADDRSELECT: + netlbl_af4list_foreach_rcu(iter4, &entry->def.addrsel->list4) { + map4 = netlbl_domhsh_addr4_entry(iter4); + cipso_v4_doi_putdef(map4->def.cipso); + } #if IS_ENABLED(CONFIG_IPV6) - netlbl_af6list_foreach_rcu(iter6, - &entry->def.addrsel->list6) { - map6 = netlbl_domhsh_addr6_entry(iter6); - calipso_doi_putdef(map6->def.calipso); - } + netlbl_af6list_foreach_rcu(iter6, &entry->def.addrsel->list6) { + map6 = netlbl_domhsh_addr6_entry(iter6); + calipso_doi_putdef(map6->def.calipso); + } #endif /* IPv6 */ - break; - case NETLBL_NLTYPE_CIPSOV4: - cipso_v4_doi_putdef(entry->def.cipso); - break; + break; + case NETLBL_NLTYPE_CIPSOV4: + cipso_v4_doi_putdef(entry->def.cipso); + break; #if IS_ENABLED(CONFIG_IPV6) - case NETLBL_NLTYPE_CALIPSO: - calipso_doi_putdef(entry->def.calipso); - break; + case NETLBL_NLTYPE_CALIPSO: + calipso_doi_putdef(entry->def.calipso); + break; #endif /* IPv6 */ - } - call_rcu(&entry->rcu, netlbl_domhsh_free_entry); } + call_rcu(&entry->rcu, netlbl_domhsh_free_entry);

return ret_val; }

From: Xin Long lucien.xin@gmail.com

[ Upstream commit 3106ecb43a05dc3e009779764b9da245a5d082de ]

With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck:

[ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp]

There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead.

The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()").

Thanks to Marcelo for pointing the buggy code out.

v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu yinxu@redhat.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sctp/socket.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)

--- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -8176,8 +8176,6 @@ static int sctp_get_port_local(struct so

pr_debug("%s: begins, snum:%d\n", __func__, snum);

- local_bh_disable(); - if (snum == 0) { /* Search for an available port. */ int low, high, remaining, index; @@ -8196,20 +8194,21 @@ static int sctp_get_port_local(struct so continue; index = sctp_phashfn(sock_net(sk), rover); head = &sctp_port_hashtable[index]; - spin_lock(&head->lock); + spin_lock_bh(&head->lock); sctp_for_each_hentry(pp, &head->chain) if ((pp->port == rover) && net_eq(sock_net(sk), pp->net)) goto next; break; next: - spin_unlock(&head->lock); + spin_unlock_bh(&head->lock); + cond_resched(); } while (--remaining > 0);

/* Exhausted local port range during search? */ ret = 1; if (remaining <= 0) - goto fail; + return ret;

/* OK, here is the one we will use. HEAD (the port * hash table list entry) is non-NULL and we hold it's @@ -8224,7 +8223,7 @@ static int sctp_get_port_local(struct so * port iterator, pp being NULL. */ head = &sctp_port_hashtable[sctp_phashfn(sock_net(sk), snum)]; - spin_lock(&head->lock); + spin_lock_bh(&head->lock); sctp_for_each_hentry(pp, &head->chain) { if ((pp->port == snum) && net_eq(pp->net, sock_net(sk))) goto pp_found; @@ -8324,10 +8323,7 @@ success: ret = 0;

fail_unlock: - spin_unlock(&head->lock); - -fail: - local_bh_enable(); + spin_unlock_bh(&head->lock); return ret; }

From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp

[ Upstream commit 2a63866c8b51a3f72cea388dfac259d0e14c4ba6 ]

syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation.

---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h>

int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ----------

One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called.

The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless.

[1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b...

Reported-by: syzbot syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/tipc/socket.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -2616,18 +2616,21 @@ static int tipc_shutdown(struct socket *

trace_tipc_sk_shutdown(sk, NULL, TIPC_DUMP_ALL, " "); __tipc_shutdown(sock, TIPC_CONN_SHUTDOWN); - sk->sk_shutdown = SEND_SHUTDOWN; + if (tipc_sk_type_connectionless(sk)) + sk->sk_shutdown = SHUTDOWN_MASK; + else + sk->sk_shutdown = SEND_SHUTDOWN;

if (sk->sk_state == TIPC_DISCONNECTING) { /* Discard any unreceived messages */ __skb_queue_purge(&sk->sk_receive_queue);

- /* Wake up anyone sleeping in poll */ - sk->sk_state_change(sk); res = 0; } else { res = -ENOTCONN; } + /* Wake up anyone sleeping in poll. */ + sk->sk_state_change(sk);

release_sock(sk); return res;