There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com --- v3: Use udev->port_is_suspended which reflects upstream port status
v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..c92fb648a1c4 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child;
- if (port_dev->child) { - usb_disable_usb2_hardware_lpm(port_dev->child); - usb_unlocked_disable_lpm(port_dev->child); + if (udev && !udev->port_is_suspended) { + usb_disable_usb2_hardware_lpm(udev); + usb_unlocked_disable_lpm(udev); } }
On Fri, Dec 06, 2024 at 03:48:17PM +0800, Kai-Heng Feng wrote:
There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com
v3: Use udev->port_is_suspended which reflects upstream port status
v2: Add "Cc: stable@vger.kernel.org"
Acked-by: Alan Stern stern@rowland.harvard.edu
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..c92fb648a1c4 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev);
- struct usb_device *udev = port_dev->child;
- if (port_dev->child) {
usb_disable_usb2_hardware_lpm(port_dev->child);usb_unlocked_disable_lpm(port_dev->child);
- if (udev && !udev->port_is_suspended) {
usb_disable_usb2_hardware_lpm(udev);usb_unlocked_disable_lpm(udev);} -- 2.47.0
On 06/12/2024 07:48, Kai-Heng Feng wrote:
There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com
v3: Use udev->port_is_suspended which reflects upstream port status
v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..c92fb648a1c4 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev);
- struct usb_device *udev = port_dev->child;
- if (port_dev->child) {
usb_disable_usb2_hardware_lpm(port_dev->child);usb_unlocked_disable_lpm(port_dev->child);
- if (udev && !udev->port_is_suspended) {
usb_disable_usb2_hardware_lpm(udev);usb_unlocked_disable_lpm(udev);
This resolves the issue I have been seeing [0].
Tested-by: Jon Hunter jonathanh@nvidia.com
Thanks! Jon
[0] https://lore.kernel.org/linux-usb/d5e79487-0f99-4ff2-8f49-0c403f1190af@nvidi...
Hi Greg,
On 18/12/2024 16:21, Jon Hunter wrote:
On 06/12/2024 07:48, Kai-Heng Feng wrote:
There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com
v3: Use udev->port_is_suspended which reflects upstream port status
v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..c92fb648a1c4 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child; - if (port_dev->child) { - usb_disable_usb2_hardware_lpm(port_dev->child); - usb_unlocked_disable_lpm(port_dev->child); + if (udev && !udev->port_is_suspended) { + usb_disable_usb2_hardware_lpm(udev); + usb_unlocked_disable_lpm(udev); } }
This resolves the issue I have been seeing [0].
Tested-by: Jon Hunter jonathanh@nvidia.com
Thanks! Jon
[0] https://lore.kernel.org/linux-usb/ d5e79487-0f99-4ff2-8f49-0c403f1190af@nvidia.com/
Let me know if you OK to pick up this fix now?
Thanks! Jon
On Thu, Jan 02, 2025 at 02:20:13PM +0000, Jon Hunter wrote:
Hi Greg,
On 18/12/2024 16:21, Jon Hunter wrote:
On 06/12/2024 07:48, Kai-Heng Feng wrote:
There's USB error when tegra board is shutting down: [ 180.919315] usb 2-3: Failed to set U1 timeout to 0x0,error code -113 [ 180.919995] usb 2-3: Failed to set U1 timeout to 0xa,error code -113 [ 180.920512] usb 2-3: Failed to set U2 timeout to 0x4,error code -113 [ 186.157172] tegra-xusb 3610000.usb: xHCI host controller not responding, assume dead [ 186.157858] tegra-xusb 3610000.usb: HC died; cleaning up [ 186.317280] tegra-xusb 3610000.usb: Timeout while waiting for evaluate context command
The issue is caused by disabling LPM on already suspended ports.
For USB2 LPM, the LPM is already disabled during port suspend. For USB3 LPM, port won't transit to U1/U2 when it's already suspended in U3, hence disabling LPM is only needed for ports that are not suspended.
Cc: Wayne Chang waynec@nvidia.com Cc: stable@vger.kernel.org Fixes: d920a2ed8620 ("usb: Disable USB3 LPM at shutdown") Signed-off-by: Kai-Heng Feng kaihengf@nvidia.com
v3: Use udev->port_is_suspended which reflects upstream port status
v2: Add "Cc: stable@vger.kernel.org"
drivers/usb/core/port.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index e7da2fca11a4..c92fb648a1c4 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -452,10 +452,11 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child; - if (port_dev->child) { - usb_disable_usb2_hardware_lpm(port_dev->child); - usb_unlocked_disable_lpm(port_dev->child); + if (udev && !udev->port_is_suspended) { + usb_disable_usb2_hardware_lpm(udev); + usb_unlocked_disable_lpm(udev); } }
This resolves the issue I have been seeing [0].
Tested-by: Jon Hunter jonathanh@nvidia.com
Thanks! Jon
[0] https://lore.kernel.org/linux-usb/ d5e79487-0f99-4ff2-8f49-0c403f1190af@nvidia.com/
Let me know if you OK to pick up this fix now?
This is already in linux-next and in my usb-linus branch and should go to Linus today or tomorrow.
thanks,
greg k-h
linux-stable-mirror@lists.linaro.org
-
Alan Stern -
Greg KH -
Jon Hunter -
Kai-Heng Feng