The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x e90c369cc2ffcf7145a46448de101f715a1f5584 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024072901-rare-engaging-abb3@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

e90c369cc2ff ("thermal/drivers/broadcom: Fix race between removal and clock disable") f29ecd3748a2 ("thermal: bcm2835: Convert to platform remove callback returning void")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From e90c369cc2ffcf7145a46448de101f715a1f5584 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Date: Tue, 9 Jul 2024 14:59:31 +0200 Subject: [PATCH] thermal/drivers/broadcom: Fix race between removal and clock disable

During the probe, driver enables clocks necessary to access registers (in get_temp()) and then registers thermal zone with managed-resources (devm) interface. Removal of device is not done in reversed order, because: 1. Clock will be disabled in driver remove() callback - thermal zone is still registered and accessible to users, 2. devm interface will unregister thermal zone.

This leaves short window between (1) and (2) for accessing the get_temp() callback with disabled clock.

Fix this by enabling clock also via devm-interface, so entire cleanup path will be in proper, reversed order.

Fixes: 8454c8c09c77 ("thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-1-241644e2b6e0@linaro.or... Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index 5c1cebe07580..3b1030fc4fbf 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -185,7 +185,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) return err; }

- data->clk = devm_clk_get(&pdev->dev, NULL); + data->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(data->clk)) { err = PTR_ERR(data->clk); if (err != -EPROBE_DEFER) @@ -193,10 +193,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) return err; }

- err = clk_prepare_enable(data->clk); - if (err) - return err; - rate = clk_get_rate(data->clk); if ((rate < 1920000) || (rate > 5000000)) dev_warn(&pdev->dev, @@ -211,7 +207,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Failed to register the thermal device: %d\n", err); - goto err_clk; + return err; }

/* @@ -236,7 +232,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Not able to read trip_temp: %d\n", err); - goto err_tz; + return err; }

/* set bandgap reference voltage and enable voltage regulator */ @@ -269,17 +265,11 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) */ err = thermal_add_hwmon_sysfs(tz); if (err) - goto err_tz; + return err;

bcm2835_thermal_debugfs(pdev);

return 0; -err_tz: - devm_thermal_of_zone_unregister(&pdev->dev, tz); -err_clk: - clk_disable_unprepare(data->clk); - - return err; }

static void bcm2835_thermal_remove(struct platform_device *pdev) @@ -287,7 +277,6 @@ static void bcm2835_thermal_remove(struct platform_device *pdev) struct bcm2835_thermal_data *data = platform_get_drvdata(pdev);

debugfs_remove_recursive(data->debugfsdir); - clk_disable_unprepare(data->clk); }

static struct platform_driver bcm2835_thermal_driver = {