From: Conor Dooley conor.dooley@microchip.com
mpfs_gpio_direction_output() actually sets the line to input mode. Use the correct register settings for output mode so that this function actually works as intended.
This was a copy-paste mistake made when converting to regmap during the driver submission process. It went unnoticed because my test for output mode is toggling LEDs on an Icicle kit which functions with the incorrect code. The internal reporter has yet to test the patch, but on their system the incorrect setting may be the reason for failures to drive the GPIO lines on the BeagleV-fire board.
CC: stable@vger.kernel.org Fixes: a987b78f3615e ("gpio: mpfs: add polarfire soc gpio support") Signed-off-by: Conor Dooley conor.dooley@microchip.com --- CC: Conor Dooley conor.dooley@microchip.com CC: Daire McNamara daire.mcnamara@microchip.com CC: Cyril.Jean@microchip.com CC: Linus Walleij linus.walleij@linaro.org CC: Bartosz Golaszewski brgl@bgdev.pl CC: linux-riscv@lists.infradead.org CC: linux-gpio@vger.kernel.org CC: linux-kernel@vger.kernel.org --- drivers/gpio/gpio-mpfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-mpfs.c b/drivers/gpio/gpio-mpfs.c index 82d557a7e5d8d..9468795b96348 100644 --- a/drivers/gpio/gpio-mpfs.c +++ b/drivers/gpio/gpio-mpfs.c @@ -69,7 +69,7 @@ static int mpfs_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio_in struct mpfs_gpio_chip *mpfs_gpio = gpiochip_get_data(gc);
regmap_update_bits(mpfs_gpio->regs, MPFS_GPIO_CTRL(gpio_index), - MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_IN); + MPFS_GPIO_DIR_MASK, MPFS_GPIO_EN_OUT | MPFS_GPIO_EN_OUT_BUF); regmap_update_bits(mpfs_gpio->regs, mpfs_gpio->offsets->outp, BIT(gpio_index), value << gpio_index);
From: Bartosz Golaszewski bartosz.golaszewski@linaro.org
On Thu, 25 Sep 2025 16:39:18 +0100, Conor Dooley wrote:
mpfs_gpio_direction_output() actually sets the line to input mode. Use the correct register settings for output mode so that this function actually works as intended.
This was a copy-paste mistake made when converting to regmap during the driver submission process. It went unnoticed because my test for output mode is toggling LEDs on an Icicle kit which functions with the incorrect code. The internal reporter has yet to test the patch, but on their system the incorrect setting may be the reason for failures to drive the GPIO lines on the BeagleV-fire board.
[...]
I'm about to send my last PR with fixes for v6.17 and this hasn't been in next even for a day so let me queue this for v6.18 and it will get backported once it's upstream next week.
[1/1] gpio: mpfs: fix setting gpio direction to output https://git.kernel.org/brgl/linux/c/bc061143637532c08d9fc657eec93fdc2588068e
Best regards,
On Fri, Sep 26, 2025 at 11:57:30AM +0200, Bartosz Golaszewski wrote:
From: Bartosz Golaszewski bartosz.golaszewski@linaro.org
On Thu, 25 Sep 2025 16:39:18 +0100, Conor Dooley wrote:
mpfs_gpio_direction_output() actually sets the line to input mode. Use the correct register settings for output mode so that this function actually works as intended.
This was a copy-paste mistake made when converting to regmap during the driver submission process. It went unnoticed because my test for output mode is toggling LEDs on an Icicle kit which functions with the incorrect code. The internal reporter has yet to test the patch, but on their system the incorrect setting may be the reason for failures to drive the GPIO lines on the BeagleV-fire board.
[...]
I'm about to send my last PR with fixes for v6.17 and this hasn't been in next even for a day so let me queue this for v6.18 and it will get backported once it's upstream next week.
Ye, that's not a problem. It's an "always been broken" thing, so no real rush. Thanks!
linux-stable-mirror@lists.linaro.org