This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.116-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 4.4.116-rc1
Steven Rostedt (VMware) rostedt@goodmis.org ftrace: Remove incorrect setting of glob search field
Eric W. Biederman ebiederm@xmission.com mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copy
Amir Goldstein amir73il@gmail.com ovl: fix failure to fsync lower dir
Greg Kroah-Hartman gregkh@linuxfoundation.org ACPI: sbshc: remove raw pointer from printk() message
Keith Busch keith.busch@intel.com nvme: Fix managing degraded controllers
Nikolay Borisov nborisov@suse.com btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker
Bart Van Assche bart.vanassche@wdc.com pktcdvd: Fix pkt_setup_dev() error path
James Hogan jhogan@kernel.org EDAC, octeon: Fix an uninitialized variable warning
Max Filippov jcmvbkbc@gmail.com xtensa: fix futex_atomic_cmpxchg_inatomic
Mikulas Patocka mpatocka@redhat.com alpha: fix reboot on Avanti platform
Mikulas Patocka mpatocka@redhat.com alpha: fix crash if pthread_create races with signal delivery
Eric W. Biederman ebiederm@xmission.com signal/sh: Ensure si_signo is initialized in do_divide_error
Eric W. Biederman ebiederm@xmission.com signal/openrisc: Fix do_unaligned_access to send the proper signal
Hans de Goede hdegoede@redhat.com Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version
Kai-Heng Feng kai.heng.feng@canonical.com Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"
Hans de Goede hdegoede@redhat.com Bluetooth: btsdio: Do not bind to non-removable BCM43341
Hans de Goede hdegoede@redhat.com HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working
Rasmus Villemoes linux@rasmusvillemoes.dk kernel/async.c: revert "async: simplify lowest_in_progress()"
Mauro Carvalho Chehab mchehab@osg.samsung.com media: cxusb, dib0700: ignore XC2028_I2C_FLUSH
Mauro Carvalho Chehab mchehab@s-opensource.com media: ts2020: avoid integer overflows on 32 bit machines
Martin Kaiser martin@kaiser.cx watchdog: imx2_wdt: restore previous timeout after suspend+resume
Liran Alon liran.alon@oracle.com KVM: nVMX: Fix races when sending nested PI while dest enters/leaves L2
Marc Zyngier marc.zyngier@arm.com arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
Horia Geantă horia.geanta@nxp.com crypto: caam - fix endless loop when DECO acquire fails
Daniel Mentz danielmentz@google.com media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32
Daniel Mentz danielmentz@google.com media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha
Hans Verkuil hansverk@cisco.com media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: avoid sizeof(type)
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: fix the indentation
Hans Verkuil hans.verkuil@cisco.com media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF
Ricardo Ribalda Delgado ricardo.ribalda@gmail.com vb2: V4L2_BUF_FLAG_DONE is set after DQBUF
Hans Verkuil hans.verkuil@cisco.com media: v4l2-ioctl.c: don't copy back the result for -ENOTTY
Cong Wang xiyou.wangcong@gmail.com nsfs: mark dentry with DCACHE_RCUACCESS
Eric Biggers ebiggers@google.com crypto: poly1305 - remove ->setkey() method
Eric Biggers ebiggers@google.com crypto: cryptd - pass through absence of ->setkey()
Eric Biggers ebiggers@google.com crypto: hash - introduce crypto_hash_alg_has_setkey()
Mika Westerberg mika.westerberg@linux.intel.com ahci: Add Intel Cannon Lake PCH-H PCI ID
Hans de Goede hdegoede@redhat.com ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
Hans de Goede hdegoede@redhat.com ahci: Annotate PCI ids for mobile Intel chipsets as such
Ivan Vecera ivecera@redhat.com kernfs: fix regression in kernfs_fop_write caused by wrong type
Eric Biggers ebiggers@google.com NFS: reject request for id_legacy key without auxdata
J. Bruce Fields bfields@redhat.com NFS: commit direct writes even if they fail partially
Trond Myklebust trond.myklebust@primarydata.com NFS: Add a cond_resched() to nfs_commit_release_pages()
Scott Mayhew smayhew@redhat.com nfs/pnfs: fix nfs_direct_req ref leak when i/o falls back to the mds
Bradley Bolen bradleybolen@gmail.com ubi: block: Fix locking for idr_alloc/idr_remove
Miquel Raynal miquel.raynal@free-electrons.com mtd: nand: sunxi: Fix ECC strength choice
Miquel Raynal miquel.raynal@free-electrons.com mtd: nand: Fix nand_do_read_oob() return value
Kamal Dasu kdasu.kdev@gmail.com mtd: nand: brcmnand: Disable prefetch by default
Arnd Bergmann arnd@arndb.de mtd: cfi: convert inline functions to macros
Malcolm Priestley tvboxspy@gmail.com media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tuner
Malcolm Priestley tvboxspy@gmail.com media: dvb-usb-v2: lmedm04: Improve logic checking of warm start
Mohamed Ghannam simo.ghannam@gmail.com dccp: CVE-2017-8824: use-after-free in DCCP code
Steven Rostedt (VMware) rostedt@goodmis.org sched/rt: Up the root domain ref count when passing it around via IPIs
Steven Rostedt (VMware) rostedt@goodmis.org sched/rt: Use container_of() to get root domain in rto_push_irq_work_func()
Petr Cvek petr.cvek@tul.cz usb: gadget: uvc: Missing files for configfs interface
Thomas Gleixner tglx@linutronix.de posix-timer: Properly check sigevent->sigev_notify
Eric W. Biederman ebiederm@xmission.com netfilter: nf_queue: Make the queue_handler pernet
Hugh Dickins hughd@google.com kaiser: fix compile error without vsyscall
Eric Biggers ebiggers@google.com x86/kaiser: fix build error with KASAN && !FUNCTION_GRAPH_TRACER
Yang Shunyong shunyong.yang@hxt-semitech.com dmaengine: dmatest: fix container_of member in dmatest_callback
Aurelien Aptel aaptel@suse.com CIFS: zero sensitive data when freeing
Daniel N Pettersson danielnp@axis.com cifs: Fix autonegotiate security settings mismatch
Matthew Wilcox mawilcox@microsoft.com cifs: Fix missing put_xid in cifs_file_strict_mmap
Michal Suchanek msuchanek@suse.de powerpc/pseries: include linux/types.h in asm/hvcall.h
Borislav Petkov bp@suse.de x86/microcode: Do the family check first
Borislav Petkov bp@suse.de x86/microcode/AMD: Do not load when running on a hypervisor
Robert Baronescu robert.baronescu@nxp.com crypto: tcrypt - fix S/G table for test_aead_speed()
Al Viro viro@zeniv.linux.org.uk don't put symlink bodies in pagecache into highmem
Eric Biggers ebiggers@google.com KEYS: encrypted: fix buffer overread in valid_master_desc()
Jesse Chan jc@linux.com media: soc_camera: soc_scale_crop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
Jason Wang jasowang@redhat.com vhost_net: stop device during reset owner
Li RongQing lirongqing@baidu.com tcp: release sk_frag.page in tcp_disconnect
Chunhao Lin hau@realtek.com r8169: fix RTL8168EP take too long to complete driver initialization.
Junxiao Bi junxiao.bi@oracle.com qlcnic: fix deadlock bug
Eric Dumazet edumazet@google.com net: igmp: add a missing rcu locking section
Nikolay Aleksandrov nikolay@cumulusnetworks.com ip6mr: fix stale iterator
Josh Poimboeuf jpoimboe@redhat.com x86/asm: Fix inline asm call constraints for GCC 4.4
Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com drm: rcar-du: Fix race condition when disabling planes at CRTC stop
Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com drm: rcar-du: Use the VBK interrupt for vblank events
Kuninori Morimoto kuninori.morimoto.gx@renesas.com ASoC: rsnd: avoid duplicate free_irq()
Kuninori Morimoto kuninori.morimoto.gx@renesas.com ASoC: rsnd: don't call free_irq() on Parent SSI
Julian Scheel julian@jusst.de ASoC: simple-card: Fix misleading error message
Matthias Hintzmann matthias.dev@gmx.de net: cdc_ncm: initialize drvflags before usage
Shuah Khan shuahkh@osg.samsung.com usbip: fix 3eee23c3ec14 tcp_socket address still in the status file
Shuah Khan shuahkh@osg.samsung.com usbip: vhci_hcd: clear just the USB_PORT_STAT_POWER bit
Jesse Chan jc@linux.com ASoC: pcm512x: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
Michael Ellerman mpe@ellerman.id.au powerpc/64s: Allow control of RFI flush via debugfs
Michael Ellerman mpe@ellerman.id.au powerpc/64s: Wire up cpu_show_meltdown()
Oliver O'Halloran oohall@gmail.com powerpc/powernv: Check device-tree for RFI flush settings
Michael Neuling mikey@neuling.org powerpc/pseries: Query hypervisor for RFI flush settings
Michael Ellerman mpe@ellerman.id.au powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
Michael Ellerman mpe@ellerman.id.au powerpc/64s: Add support for RFI flush of L1-D cache
Nicholas Piggin npiggin@gmail.com powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
Nicholas Piggin npiggin@gmail.com powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
Nicholas Piggin npiggin@gmail.com powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
Nicholas Piggin npiggin@gmail.com powerpc/64s: Simple RFI macro conversions
Nicholas Piggin npiggin@gmail.com powerpc/64: Add macros for annotating the destination of rfid/hrfid
Michael Neuling mikey@neuling.org powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
Alan Modra amodra@gmail.com powerpc: Simplify module TOC handling
Benjamin Herrenschmidt benh@kernel.crashing.org powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
Oliver O'Halloran oohall@gmail.com powerpc/64: Fix flush_(d|i)cache_range() called from modules
Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
-------------
Diffstat:
Makefile | 4 +- arch/alpha/kernel/pci_impl.h | 3 +- arch/alpha/kernel/process.c | 3 +- arch/arm/kvm/handle_exit.c | 13 +- arch/mn10300/mm/misalignment.c | 2 +- arch/openrisc/kernel/traps.c | 10 +- arch/powerpc/Kconfig | 3 +- arch/powerpc/include/asm/exception-64e.h | 6 + arch/powerpc/include/asm/exception-64s.h | 55 +- arch/powerpc/include/asm/feature-fixups.h | 15 + arch/powerpc/include/asm/hvcall.h | 18 + arch/powerpc/include/asm/paca.h | 10 + arch/powerpc/include/asm/plpar_wrappers.h | 14 + arch/powerpc/include/asm/ppc_asm.h | 12 + arch/powerpc/include/asm/setup.h | 13 + arch/powerpc/kernel/asm-offsets.c | 4 + arch/powerpc/kernel/entry_64.S | 44 +- arch/powerpc/kernel/exceptions-64s.S | 126 ++- arch/powerpc/kernel/misc_64.S | 32 +- arch/powerpc/kernel/module_64.c | 12 +- arch/powerpc/kernel/process.c | 5 +- arch/powerpc/kernel/setup_64.c | 139 +++ arch/powerpc/kernel/vmlinux.lds.S | 9 + arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_segment.S | 4 +- arch/powerpc/lib/feature-fixups.c | 42 + arch/powerpc/platforms/powernv/setup.c | 50 + arch/powerpc/platforms/pseries/setup.c | 37 +- arch/sh/kernel/traps_32.c | 3 +- arch/x86/crypto/poly1305_glue.c | 1 - arch/x86/include/asm/asm.h | 4 +- arch/x86/include/asm/vsyscall.h | 2 +- arch/x86/kernel/cpu/microcode/core.c | 47 +- arch/x86/kvm/vmx.c | 5 +- arch/x86/mm/kaiser.c | 2 +- arch/xtensa/include/asm/futex.h | 23 +- crypto/ahash.c | 11 + crypto/cryptd.c | 3 +- crypto/poly1305_generic.c | 17 +- crypto/tcrypt.c | 6 +- drivers/acpi/sbshc.c | 4 +- drivers/ata/ahci.c | 37 +- drivers/block/pktcdvd.c | 4 +- drivers/bluetooth/btsdio.c | 9 + drivers/bluetooth/btusb.c | 19 +- drivers/crypto/caam/ctrl.c | 8 +- drivers/dma/dmatest.c | 2 +- drivers/edac/octeon_edac-lmc.c | 1 + drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 56 +- drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 8 + drivers/hid/hid-core.c | 12 +- drivers/media/dvb-frontends/ts2020.c | 4 +- drivers/media/platform/soc_camera/soc_scale_crop.c | 4 + drivers/media/usb/dvb-usb-v2/lmedm04.c | 39 +- drivers/media/usb/dvb-usb/cxusb.c | 2 + drivers/media/usb/dvb-usb/dib0700_devices.c | 1 + drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 1023 ++++++++++++-------- drivers/media/v4l2-core/v4l2-ioctl.c | 5 +- drivers/media/v4l2-core/videobuf2-v4l2.c | 6 + drivers/mtd/nand/brcmnand/brcmnand.c | 13 +- drivers/mtd/nand/nand_base.c | 5 +- drivers/mtd/nand/sunxi_nand.c | 8 +- drivers/mtd/ubi/block.c | 42 +- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 18 +- drivers/net/ethernet/realtek/r8169.c | 4 +- drivers/net/usb/cdc_ncm.c | 6 +- drivers/nvme/host/pci.c | 13 +- drivers/usb/gadget/function/uvc_configfs.c | 16 +- drivers/usb/usbip/vhci_hcd.c | 2 +- drivers/usb/usbip/vhci_sysfs.c | 7 +- drivers/vhost/net.c | 1 + drivers/watchdog/imx2_wdt.c | 20 +- fs/btrfs/inode.c | 10 +- fs/cifs/cifsencrypt.c | 3 +- fs/cifs/connect.c | 6 +- fs/cifs/file.c | 26 +- fs/cifs/misc.c | 14 +- fs/cifs/smb2pdu.c | 3 +- fs/ext4/inode.c | 1 + fs/ext4/namei.c | 1 + fs/ext4/symlink.c | 10 +- fs/f2fs/inode.c | 1 + fs/f2fs/namei.c | 5 +- fs/inode.c | 6 + fs/kernfs/file.c | 2 +- fs/nfs/direct.c | 4 +- fs/nfs/nfs4idmap.c | 6 +- fs/nfs/pnfs.c | 4 +- fs/nfs/write.c | 2 + fs/nsfs.c | 1 + fs/overlayfs/readdir.c | 6 +- include/crypto/internal/hash.h | 2 + include/crypto/poly1305.h | 2 - include/linux/fs.h | 1 + include/linux/mtd/map.h | 130 ++- include/net/netfilter/nf_queue.h | 4 +- include/net/netns/netfilter.h | 2 + kernel/async.c | 20 +- kernel/sched/core.c | 13 + kernel/sched/rt.c | 24 +- kernel/sched/sched.h | 2 + kernel/time/posix-timers.c | 34 +- kernel/trace/ftrace.c | 1 - net/dccp/proto.c | 5 + net/ipv4/igmp.c | 4 + net/ipv4/tcp.c | 6 + net/ipv6/ip6mr.c | 1 + net/netfilter/nf_queue.c | 17 +- net/netfilter/nfnetlink_queue.c | 18 +- scripts/mod/modpost.c | 3 +- security/keys/encrypted-keys/encrypted.c | 31 +- sound/soc/codecs/pcm512x-spi.c | 4 + sound/soc/generic/simple-card.c | 8 +- sound/soc/sh/rcar/rsnd.h | 2 + sound/soc/sh/rcar/ssi.c | 5 + 116 files changed, 1821 insertions(+), 851 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com
commit 844e3be47693f92a108cb1fb3b0606bf25e9c7a6 upstream.
Classic BPF JIT was never ported completely to work on little endian powerpc. However, it can be enabled and will crash the system when used. As such, disable use of BPF JIT on ppc64le.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by: Thadeu Lima de Souza Cascardo cascardo@redhat.com Signed-off-by: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com Acked-by: Thadeu Lima de Souza Cascardo cascardo@redhat.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -129,7 +129,7 @@ config PPC select IRQ_FORCED_THREADING select HAVE_RCU_TABLE_FREE if SMP select HAVE_SYSCALL_TRACEPOINTS - select HAVE_BPF_JIT + select HAVE_BPF_JIT if CPU_BIG_ENDIAN select HAVE_ARCH_JUMP_LABEL select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_HAS_GCOV_PROFILE_ALL
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver O'Halloran oohall@gmail.com
commit 8f5f525d5b83f7d76a6baf9c4e94d4bf312ea7f6 upstream.
When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does not include a global entry point. A function's global entry point is used when the function is called from a different TOC context and in the kernel this typically means a call from a module into the vmlinux (or vice-versa).
There are a few exported asm functions declared with _GLOBAL() and calling them from a module will likely crash the kernel since any TOC relative load will yield garbage.
flush_icache_range() and flush_dcache_range() are both exported to modules, and use the TOC, so must use _GLOBAL_TOC().
Fixes: 721aeaa9fdf3 ("powerpc: Build little endian ppc64 kernel with ABIv2") Signed-off-by: Oliver O'Halloran oohall@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/include/asm/ppc_asm.h | 12 ++++++++++++ arch/powerpc/kernel/misc_64.S | 4 ++-- 2 files changed, 14 insertions(+), 2 deletions(-)
--- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -224,6 +224,16 @@ name: \ .globl name; \ name:
+#define _KPROBE_TOC(name) \ + .section ".kprobes.text","a"; \ + .align 2 ; \ + .type name,@function; \ + .globl name; \ +name: \ +0: addis r2,r12,(.TOC.-0b)@ha; \ + addi r2,r2,(.TOC.-0b)@l; \ + .localentry name,.-name + #define DOTSYM(a) a
#else @@ -261,6 +271,8 @@ name: \ .type GLUE(.,name),@function; \ GLUE(.,name):
+#define _KPROBE_TOC(n) _KPROBE(n) + #define DOTSYM(a) GLUE(.,a)
#endif --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -66,7 +66,7 @@ PPC64_CACHES: * flush all bytes from start through stop-1 inclusive */
-_KPROBE(flush_icache_range) +_KPROBE_TOC(flush_icache_range) BEGIN_FTR_SECTION PURGE_PREFETCHED_INS blr @@ -117,7 +117,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_I * * flush all bytes from start to stop-1 inclusive */ -_GLOBAL(flush_dcache_range) +_GLOBAL_TOC(flush_dcache_range)
/* * Flush the data cache to memory
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Herrenschmidt benh@kernel.crashing.org
commit 5a69aec945d27e78abac9fd032533d3aaebf7c1e upstream.
VSX uses a combination of the old vector registers, the old FP registers and new "second halves" of the FP registers.
Thus when we need to see the VSX state in the thread struct (flush_vsx_to_thread()) or when we'll use the VSX in the kernel (enable_kernel_vsx()) we need to ensure they are all flushed into the thread struct if either of them is individually enabled.
Unfortunately we only tested if the whole VSX was enabled, not if they were individually enabled.
Fixes: 72cd7b44bc99 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Signed-off-by: Benjamin Herrenschmidt benh@kernel.crashing.org [mpe: Backported due to changed context] Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/process.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -209,7 +209,8 @@ void enable_kernel_vsx(void) WARN_ON(preemptible());
#ifdef CONFIG_SMP - if (current->thread.regs && (current->thread.regs->msr & MSR_VSX)) + if (current->thread.regs && + (current->thread.regs->msr & (MSR_VSX|MSR_VEC|MSR_FP))) giveup_vsx(current); else giveup_vsx(NULL); /* just enable vsx for kernel - force */ @@ -231,7 +232,7 @@ void flush_vsx_to_thread(struct task_str { if (tsk->thread.regs) { preempt_disable(); - if (tsk->thread.regs->msr & MSR_VSX) { + if (tsk->thread.regs->msr & (MSR_VSX|MSR_VEC|MSR_FP)) { #ifdef CONFIG_SMP BUG_ON(tsk != current); #endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Modra amodra@gmail.com
commit c153693d7eb9eeb28478aa2deaaf0b4e7b5ff5e9 upstream.
PowerPC64 uses the symbol .TOC. much as other targets use _GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in powerpc parlance, the TOC pointer). Global offset tables are generally local to an executable or shared library, or in the kernel, module. Thus it does not make sense for a module to resolve a relocation against .TOC. to the kernel's .TOC. value. A module has its own .TOC., and indeed the powerpc64 module relocation processing ignores the kernel value of .TOC. and instead calculates a module-local value.
This patch removes code involved in exporting the kernel .TOC., tweaks modpost to ignore an undefined .TOC., and the module loader to twiddle the section symbol so that .TOC. isn't seen as undefined.
Note that if the kernel was compiled with -msingle-pic-base then ELFv2 would not have function global entry code setting up r2. In that case the module call stubs would need to be modified to set up r2 using the kernel .TOC. value, requiring some of this code to be reinstated.
mpe: Furthermore a change in binutils master (not yet released) causes the current way we handle the TOC to no longer work when building with MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be loaded due to there being no version found for TOC.
Signed-off-by: Alan Modra amodra@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/misc_64.S | 28 ---------------------------- arch/powerpc/kernel/module_64.c | 12 +++++++++--- scripts/mod/modpost.c | 3 ++- 3 files changed, 11 insertions(+), 32 deletions(-)
--- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -701,31 +701,3 @@ _GLOBAL(kexec_sequence) li r5,0 blr /* image->start(physid, image->start, 0); */ #endif /* CONFIG_KEXEC */ - -#ifdef CONFIG_MODULES -#if defined(_CALL_ELF) && _CALL_ELF == 2 - -#ifdef CONFIG_MODVERSIONS -.weak __crc_TOC. -.section "___kcrctab+TOC.","a" -.globl __kcrctab_TOC. -__kcrctab_TOC.: - .llong __crc_TOC. -#endif - -/* - * Export a fake .TOC. since both modpost and depmod will complain otherwise. - * Both modpost and depmod strip the leading . so we do the same here. - */ -.section "__ksymtab_strings","a" -__kstrtab_TOC.: - .asciz "TOC." - -.section "___ksymtab+TOC.","a" -/* This symbol name is important: it's used by modpost to find exported syms */ -.globl __ksymtab_TOC. -__ksymtab_TOC.: - .llong 0 /* .value */ - .llong __kstrtab_TOC. -#endif /* ELFv2 */ -#endif /* MODULES */ --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -326,7 +326,10 @@ static void dedotify_versions(struct mod } }
-/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */ +/* + * Undefined symbols which refer to .funcname, hack to funcname. Make .TOC. + * seem to be defined (value set later). + */ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) { unsigned int i; @@ -334,8 +337,11 @@ static void dedotify(Elf64_Sym *syms, un for (i = 1; i < numsyms; i++) { if (syms[i].st_shndx == SHN_UNDEF) { char *name = strtab + syms[i].st_name; - if (name[0] == '.') + if (name[0] == '.') { + if (strcmp(name+1, "TOC.") == 0) + syms[i].st_shndx = SHN_ABS; syms[i].st_name++; + } } } } @@ -351,7 +357,7 @@ static Elf64_Sym *find_dot_toc(Elf64_Shd numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
for (i = 1; i < numsyms; i++) { - if (syms[i].st_shndx == SHN_UNDEF + if (syms[i].st_shndx == SHN_ABS && strcmp(strtab + syms[i].st_name, "TOC.") == 0) return &syms[i]; } --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -594,7 +594,8 @@ static int ignore_undef_symbol(struct el if (strncmp(symname, "_restgpr0_", sizeof("_restgpr0_") - 1) == 0 || strncmp(symname, "_savegpr0_", sizeof("_savegpr0_") - 1) == 0 || strncmp(symname, "_restvr_", sizeof("_restvr_") - 1) == 0 || - strncmp(symname, "_savevr_", sizeof("_savevr_") - 1) == 0) + strncmp(symname, "_savevr_", sizeof("_savevr_") - 1) == 0 || + strcmp(symname, ".TOC.") == 0) return 1; /* Do not ignore this symbol */ return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling mikey@neuling.org
commit 191eccb1580939fb0d47deb405b82a85b0379070 upstream.
A new hypervisor call has been defined to communicate various characteristics of the CPU to guests. Add definitions for the hcall number, flags and a wrapper function.
Signed-off-by: Michael Neuling mikey@neuling.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au [Balbir fixed conflicts in backport] Signed-off-by: Balbir Singh bsingharora@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/include/asm/hvcall.h | 17 +++++++++++++++++ arch/powerpc/include/asm/plpar_wrappers.h | 14 ++++++++++++++ 2 files changed, 31 insertions(+)
--- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -239,6 +239,7 @@ #define H_GET_HCA_INFO 0x1B8 #define H_GET_PERF_COUNT 0x1BC #define H_MANAGE_TRACE 0x1C0 +#define H_GET_CPU_CHARACTERISTICS 0x1C8 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 #define H_QUERY_INT_STATE 0x1E4 #define H_POLL_PENDING 0x1D8 @@ -285,6 +286,17 @@ #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3 #define H_SET_MODE_RESOURCE_LE 4
+/* H_GET_CPU_CHARACTERISTICS return values */ +#define H_CPU_CHAR_SPEC_BAR_ORI31 (1ull << 63) // IBM bit 0 +#define H_CPU_CHAR_BCCTRL_SERIALISED (1ull << 62) // IBM bit 1 +#define H_CPU_CHAR_L1D_FLUSH_ORI30 (1ull << 61) // IBM bit 2 +#define H_CPU_CHAR_L1D_FLUSH_TRIG2 (1ull << 60) // IBM bit 3 +#define H_CPU_CHAR_L1D_THREAD_PRIV (1ull << 59) // IBM bit 4 + +#define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0 +#define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1 +#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2 + #ifndef __ASSEMBLY__
/** @@ -423,6 +435,11 @@ extern long pseries_big_endian_exception
#endif /* CONFIG_PPC_PSERIES */
+struct h_cpu_char_result { + u64 character; + u64 behaviour; +}; + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HVCALL_H */ --- a/arch/powerpc/include/asm/plpar_wrappers.h +++ b/arch/powerpc/include/asm/plpar_wrappers.h @@ -323,4 +323,18 @@ static inline long plapr_set_watchpoint0 return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0); }
+static inline long plpar_get_cpu_characteristics(struct h_cpu_char_result *p) +{ + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + long rc; + + rc = plpar_hcall(H_GET_CPU_CHARACTERISTICS, retbuf); + if (rc == H_SUCCESS) { + p->character = retbuf[0]; + p->behaviour = retbuf[1]; + } + + return rc; +} + #endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin npiggin@gmail.com
commit 50e51c13b3822d14ff6df4279423e4b7b2269bc3 upstream.
The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is used for switching from the kernel to userspace, and from the hypervisor to the guest kernel. However it can and is also used for other transitions, eg. from real mode kernel code to virtual mode kernel code, and it's not always clear from the code what the destination context is.
To make it clearer when reading the code, add macros which encode the expected destination context.
Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/include/asm/exception-64e.h | 6 ++++++ arch/powerpc/include/asm/exception-64s.h | 29 +++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+)
--- a/arch/powerpc/include/asm/exception-64e.h +++ b/arch/powerpc/include/asm/exception-64e.h @@ -209,5 +209,11 @@ exc_##label##_book3e: ori r3,r3,vector_offset@l; \ mtspr SPRN_IVOR##vector_number,r3;
+#define RFI_TO_KERNEL \ + rfi + +#define RFI_TO_USER \ + rfi + #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
--- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -50,6 +50,35 @@ #define EX_PPR 88 /* SMT thread status register (priority) */ #define EX_CTR 96
+/* Macros for annotating the expected destination of (h)rfid */ + +#define RFI_TO_KERNEL \ + rfid + +#define RFI_TO_USER \ + rfid + +#define RFI_TO_USER_OR_KERNEL \ + rfid + +#define RFI_TO_GUEST \ + rfid + +#define HRFI_TO_KERNEL \ + hrfid + +#define HRFI_TO_USER \ + hrfid + +#define HRFI_TO_USER_OR_KERNEL \ + hrfid + +#define HRFI_TO_GUEST \ + hrfid + +#define HRFI_TO_UNKNOWN \ + hrfid + #ifdef CONFIG_RELOCATABLE #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ ld r12,PACAKBASE(r13); /* get high part of &label */ \
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin npiggin@gmail.com
commit 222f20f140623ef6033491d0103ee0875fe87d35 upstream.
This commit does simple conversions of rfi/rfid to the new macros that include the expected destination context. By simple we mean cases where there is a single well known destination context, and it's simply a matter of substituting the instruction for the appropriate macro.
Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au [Balbir fixed issues with backporting to stable] Signed-off-by: Balbir Singh bsingharora@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/powerpc/include/asm/exception-64s.h | 2 +- arch/powerpc/kernel/entry_64.S | 14 +++++++++----- arch/powerpc/kernel/exceptions-64s.S | 18 +++++++++--------- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +++---- arch/powerpc/kvm/book3s_rmhandlers.S | 7 +++++-- arch/powerpc/kvm/book3s_segment.S | 4 ++-- 6 files changed, 29 insertions(+), 23 deletions(-)
--- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -220,7 +220,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) mtspr SPRN_##h##SRR0,r12; \ mfspr r12,SPRN_##h##SRR1; /* and SRR1 */ \ mtspr SPRN_##h##SRR1,r10; \ - h##rfid; \ + h##RFI_TO_KERNEL; \ b . /* prevent speculative execution */ #define EXCEPTION_PROLOG_PSERIES_1(label, h) \ __EXCEPTION_PROLOG_PSERIES_1(label, h) --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -36,6 +36,11 @@ #include <asm/hw_irq.h> #include <asm/context_tracking.h> #include <asm/tm.h> +#ifdef CONFIG_PPC_BOOK3S +#include <asm/exception-64s.h> +#else +#include <asm/exception-64e.h> +#endif
/* * System calls. @@ -353,8 +358,7 @@ tabort_syscall: mtmsrd r10, 1 mtspr SPRN_SRR0, r11 mtspr SPRN_SRR1, r12 - - rfid + RFI_TO_USER b . /* prevent speculative execution */ #endif
@@ -1077,7 +1081,7 @@ _GLOBAL(enter_rtas) mtspr SPRN_SRR0,r5 mtspr SPRN_SRR1,r6 - rfid + RFI_TO_KERNEL b . /* prevent speculative execution */
rtas_return_loc: @@ -1102,7 +1106,7 @@ rtas_return_loc:
mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 - rfid + RFI_TO_KERNEL b . /* prevent speculative execution */
.align 3 @@ -1173,7 +1177,7 @@ _GLOBAL(enter_prom) LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE) andc r11,r11,r12 mtsrr1 r11 - rfid + RFI_TO_KERNEL #endif /* CONFIG_PPC_BOOK3E */
1: /* Return from OF */ --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -46,7 +46,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) mtspr SPRN_SRR0,r10 ; \ ld r10,PACAKMSR(r13) ; \ mtspr SPRN_SRR1,r10 ; \ - rfid ; \ + RFI_TO_KERNEL ; \ b . ; /* prevent speculative execution */
#define SYSCALL_PSERIES_3 \ @@ -54,7 +54,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) 1: mfspr r12,SPRN_SRR1 ; \ xori r12,r12,MSR_LE ; \ mtspr SPRN_SRR1,r12 ; \ - rfid ; /* return to userspace */ \ + RFI_TO_USER ; /* return to userspace */ \ b . ; /* prevent speculative execution */
#if defined(CONFIG_RELOCATABLE) @@ -507,7 +507,7 @@ BEGIN_FTR_SECTION LOAD_HANDLER(r12, machine_check_handle_early) 1: mtspr SPRN_SRR0,r12 mtspr SPRN_SRR1,r11 - rfid + RFI_TO_KERNEL b . /* prevent speculative execution */ 2: /* Stack overflow. Stay on emergency stack and panic. @@ -601,7 +601,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) ld r11,PACA_EXGEN+EX_R11(r13) ld r12,PACA_EXGEN+EX_R12(r13) ld r13,PACA_EXGEN+EX_R13(r13) - HRFID + HRFI_TO_UNKNOWN b . #endif
@@ -666,7 +666,7 @@ masked_##_H##interrupt: \ ld r10,PACA_EXGEN+EX_R10(r13); \ ld r11,PACA_EXGEN+EX_R11(r13); \ GET_SCRATCH0(r13); \ - ##_H##rfid; \ + ##_H##RFI_TO_KERNEL; \ b . MASKED_INTERRUPT() @@ -756,7 +756,7 @@ kvmppc_skip_interrupt: addi r13, r13, 4 mtspr SPRN_SRR0, r13 GET_SCRATCH0(r13) - rfid + RFI_TO_KERNEL b .
kvmppc_skip_Hinterrupt: @@ -768,7 +768,7 @@ kvmppc_skip_Hinterrupt: addi r13, r13, 4 mtspr SPRN_HSRR0, r13 GET_SCRATCH0(r13) - hrfid + HRFI_TO_KERNEL b . #endif
@@ -1439,7 +1439,7 @@ machine_check_handle_early: li r3,MSR_ME andc r10,r10,r3 /* Turn off MSR_ME */ mtspr SPRN_SRR1,r10 - rfid + RFI_TO_KERNEL b . 2: /* @@ -1457,7 +1457,7 @@ machine_check_handle_early: */ bl machine_check_queue_event MACHINE_CHECK_HANDLER_WINDUP - rfid + RFI_TO_USER_OR_KERNEL 9: /* Deliver the machine check to host kernel in V mode. */ MACHINE_CHECK_HANDLER_WINDUP --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -64,7 +64,7 @@ _GLOBAL_TOC(kvmppc_hv_entry_trampoline) mtmsrd r0,1 /* clear RI in MSR */ mtsrr0 r5 mtsrr1 r6 - RFI + RFI_TO_KERNEL
kvmppc_call_hv_entry: ld r4, HSTATE_KVM_VCPU(r13) @@ -170,7 +170,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) mtsrr0 r8 mtsrr1 r7 beq cr1, 13f /* machine check */ - RFI + RFI_TO_KERNEL
/* On POWER7, we have external interrupts set to use HSRR0/1 */ 11: mtspr SPRN_HSRR0, r8 @@ -965,8 +965,7 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r0, VCPU_GPR(R0)(r4) ld r4, VCPU_GPR(R4)(r4) - - hrfid + HRFI_TO_GUEST b .
secondary_too_late: --- a/arch/powerpc/kvm/book3s_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_rmhandlers.S @@ -46,6 +46,9 @@
#define FUNC(name) name
+#define RFI_TO_KERNEL RFI +#define RFI_TO_GUEST RFI + .macro INTERRUPT_TRAMPOLINE intno
.global kvmppc_trampoline_\intno @@ -141,7 +144,7 @@ kvmppc_handler_skip_ins: GET_SCRATCH0(r13)
/* And get back into the code */ - RFI + RFI_TO_KERNEL #endif
/* @@ -164,6 +167,6 @@ _GLOBAL_TOC(kvmppc_entry_trampoline) ori r5, r5, MSR_EE mtsrr0 r7 mtsrr1 r6 - RFI + RFI_TO_KERNEL
#include "book3s_segment.S" --- a/arch/powerpc/kvm/book3s_segment.S +++ b/arch/powerpc/kvm/book3s_segment.S @@ -156,7 +156,7 @@ no_dcbz32_on: PPC_LL r9, SVCPU_R9(r3) PPC_LL r3, (SVCPU_R3)(r3)
- RFI + RFI_TO_GUEST kvmppc_handler_trampoline_enter_end:
@@ -389,5 +389,5 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) cmpwi r12, BOOK3S_INTERRUPT_DOORBELL beqa BOOK3S_INTERRUPT_DOORBELL
- RFI + RFI_TO_KERNEL kvmppc_handler_trampoline_exit_end:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin npiggin@gmail.com
commit a08f828cf47e6c605af21d2cdec68f84e799c318 upstream.
Similar to the syscall return path, in fast_exception_return we may be returning to user or kernel context. We already have a test for that, because we conditionally restore r13. So use that existing test and branch, and bifurcate the return based on that.
Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/entry_64.S | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -891,7 +891,7 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ACCOUNT_CPU_USER_EXIT(r2, r4) REST_GPR(13, r1) -1: + mtspr SPRN_SRR1,r3
ld r2,_CCR(r1) @@ -904,8 +904,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) ld r3,GPR3(r1) ld r4,GPR4(r1) ld r1,GPR1(r1) + RFI_TO_USER + b . /* prevent speculative execution */
- rfid +1: mtspr SPRN_SRR1,r3 + + ld r2,_CCR(r1) + mtcrf 0xFF,r2 + ld r2,_NIP(r1) + mtspr SPRN_SRR0,r2 + + ld r0,GPR0(r1) + ld r2,GPR2(r1) + ld r3,GPR3(r1) + ld r4,GPR4(r1) + ld r1,GPR1(r1) + RFI_TO_KERNEL b . /* prevent speculative execution */
#endif /* CONFIG_PPC_BOOK3E */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin npiggin@gmail.com
commit b8e90cb7bc04a509e821e82ab6ed7a8ef11ba333 upstream.
In the syscall exit path we may be returning to user or kernel context. We already have a test for that, because we conditionally restore r13. So use that existing test and branch, and bifurcate the return based on that.
Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/entry_64.S | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -230,13 +230,23 @@ END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECK ACCOUNT_CPU_USER_EXIT(r11, r12) HMT_MEDIUM_LOW_HAS_PPR ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ + ld r2,GPR2(r1) + ld r1,GPR1(r1) + mtlr r4 + mtcr r5 + mtspr SPRN_SRR0,r7 + mtspr SPRN_SRR1,r8 + RFI_TO_USER + b . /* prevent speculative execution */ + + /* exit to kernel */ 1: ld r2,GPR2(r1) ld r1,GPR1(r1) mtlr r4 mtcr r5 mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 - RFI + RFI_TO_KERNEL b . /* prevent speculative execution */
syscall_error:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin npiggin@gmail.com
commit c7305645eb0c1621351cfc104038831ae87c0053 upstream.
In the SLB miss handler we may be returning to user or kernel. We need to add a check early on and save the result in the cr4 register, and then we bifurcate the return path based on that.
Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Nicholas Piggin npiggin@gmail.com [mpe: Backport to 4.4 based on patch from Balbir] Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/exceptions-64s.S | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1503,6 +1503,8 @@ slb_miss_realmode:
andi. r10,r12,MSR_RI /* check for unrecoverable exception */ beq- 2f + andi. r10,r12,MSR_PR /* check for user mode (PR != 0) */ + bne 1f
.machine push .machine "power4" @@ -1516,7 +1518,23 @@ slb_miss_realmode: ld r11,PACA_EXSLB+EX_R11(r13) ld r12,PACA_EXSLB+EX_R12(r13) ld r13,PACA_EXSLB+EX_R13(r13) - rfid + RFI_TO_KERNEL + b . /* prevent speculative execution */ + +1: +.machine push +.machine "power4" + mtcrf 0x80,r9 + mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ +.machine pop + + RESTORE_PPR_PACA(PACA_EXSLB, r9) + ld r9,PACA_EXSLB+EX_R9(r13) + ld r10,PACA_EXSLB+EX_R10(r13) + ld r11,PACA_EXSLB+EX_R11(r13) + ld r12,PACA_EXSLB+EX_R12(r13) + ld r13,PACA_EXSLB+EX_R13(r13) + RFI_TO_USER b . /* prevent speculative execution */
2: mfspr r11,SPRN_SRR0 @@ -1525,7 +1543,7 @@ slb_miss_realmode: mtspr SPRN_SRR0,r10 ld r10,PACAKMSR(r13) mtspr SPRN_SRR1,r10 - rfid + RFI_TO_KERNEL b .
unrecov_slb:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman mpe@ellerman.id.au
commit aa8a5e0062ac940f7659394f4817c948dc8c0667 upstream.
On some CPUs we can prevent the Meltdown vulnerability by flushing the L1-D cache on exit from kernel to user mode, and from hypervisor to guest.
This is known to be the case on at least Power7, Power8 and Power9. At this time we do not know the status of the vulnerability on other CPUs such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale CPUs. As more information comes to light we can enable this, or other mechanisms on those CPUs.
The vulnerability occurs when the load of an architecturally inaccessible memory region (eg. userspace load of kernel memory) is speculatively executed to the point where its result can influence the address of a subsequent speculatively executed load.
In order for that to happen, the first load must hit in the L1, because before the load is sent to the L2 the permission check is performed. Therefore if no kernel addresses hit in the L1 the vulnerability can not occur. We can ensure that is the case by flushing the L1 whenever we return to userspace. Similarly for hypervisor vs guest.
In order to flush the L1-D cache on exit, we add a section of nops at each (h)rfi location that returns to a lower privileged context, and patch that with some sequence. Newer firmwares are able to advertise to us that there is a special nop instruction that flushes the L1-D. If we do not see that advertised, we fall back to doing a displacement flush in software.
For guest kernels we support migration between some CPU versions, and different CPUs may use different flush instructions. So that we are prepared to migrate to a machine with a different flush instruction activated, we may have to patch more than one flush instruction at boot if the hypervisor tells us to.
In the end this patch is mostly the work of Nicholas Piggin and Michael Ellerman. However a cast of thousands contributed to analysis of the issue, earlier versions of the patch, back ports testing etc. Many thanks to all of them.
Tested-by: Jon Masters jcm@redhat.com Signed-off-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au [Balbir - back ported to stable with changes] Signed-off-by: Balbir Singh bsingharora@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/powerpc/include/asm/exception-64s.h | 40 +++++++++++-- arch/powerpc/include/asm/feature-fixups.h | 15 +++++ arch/powerpc/include/asm/paca.h | 10 +++ arch/powerpc/include/asm/setup.h | 13 ++++ arch/powerpc/kernel/asm-offsets.c | 4 + arch/powerpc/kernel/exceptions-64s.S | 86 ++++++++++++++++++++++++++++++ arch/powerpc/kernel/setup_64.c | 79 +++++++++++++++++++++++++++ arch/powerpc/kernel/vmlinux.lds.S | 9 +++ arch/powerpc/lib/feature-fixups.c | 42 ++++++++++++++ 9 files changed, 290 insertions(+), 8 deletions(-)
--- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -50,34 +50,58 @@ #define EX_PPR 88 /* SMT thread status register (priority) */ #define EX_CTR 96
-/* Macros for annotating the expected destination of (h)rfid */ +/* + * Macros for annotating the expected destination of (h)rfid + * + * The nop instructions allow us to insert one or more instructions to flush the + * L1-D cache when returning to userspace or a guest. + */ +#define RFI_FLUSH_SLOT \ + RFI_FLUSH_FIXUP_SECTION; \ + nop; \ + nop; \ + nop
#define RFI_TO_KERNEL \ rfid
#define RFI_TO_USER \ - rfid + RFI_FLUSH_SLOT; \ + rfid; \ + b rfi_flush_fallback
#define RFI_TO_USER_OR_KERNEL \ - rfid + RFI_FLUSH_SLOT; \ + rfid; \ + b rfi_flush_fallback
#define RFI_TO_GUEST \ - rfid + RFI_FLUSH_SLOT; \ + rfid; \ + b rfi_flush_fallback
#define HRFI_TO_KERNEL \ hrfid
#define HRFI_TO_USER \ - hrfid + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback
#define HRFI_TO_USER_OR_KERNEL \ - hrfid + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback
#define HRFI_TO_GUEST \ - hrfid + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback
#define HRFI_TO_UNKNOWN \ - hrfid + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback
#ifdef CONFIG_RELOCATABLE #define __EXCEPTION_RELON_PROLOG_PSERIES_1(label, h) \ --- a/arch/powerpc/include/asm/feature-fixups.h +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -184,4 +184,19 @@ label##3: \ FTR_ENTRY_OFFSET label##1b-label##3b; \ .popsection;
+#define RFI_FLUSH_FIXUP_SECTION \ +951: \ + .pushsection __rfi_flush_fixup,"a"; \ + .align 2; \ +952: \ + FTR_ENTRY_OFFSET 951b-952b; \ + .popsection; + + +#ifndef __ASSEMBLY__ + +extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup; + +#endif + #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -192,6 +192,16 @@ struct paca_struct { #endif struct kvmppc_host_state kvm_hstate; #endif +#ifdef CONFIG_PPC_BOOK3S_64 + /* + * rfi fallback flush must be in its own cacheline to prevent + * other paca data leaking into the L1d + */ + u64 exrfi[13] __aligned(0x80); + void *rfi_flush_fallback_area; + u64 l1d_flush_congruence; + u64 l1d_flush_sets; +#endif };
extern struct paca_struct *paca; --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -26,6 +26,19 @@ void initmem_init(void); void setup_panic(void); #define ARCH_PANIC_TIMEOUT 180
+void rfi_flush_enable(bool enable); + +/* These are bit flags */ +enum l1d_flush_type { + L1D_FLUSH_NONE = 0x1, + L1D_FLUSH_FALLBACK = 0x2, + L1D_FLUSH_ORI = 0x4, + L1D_FLUSH_MTTRIG = 0x8, +}; + +void __init setup_rfi_flush(enum l1d_flush_type, bool enable); +void do_rfi_flush_fixups(enum l1d_flush_type types); + #endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_SETUP_H */ --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -243,6 +243,10 @@ int main(void) #ifdef CONFIG_PPC_BOOK3S_64 DEFINE(PACAMCEMERGSP, offsetof(struct paca_struct, mc_emergency_sp)); DEFINE(PACA_IN_MCE, offsetof(struct paca_struct, in_mce)); + DEFINE(PACA_RFI_FLUSH_FALLBACK_AREA, offsetof(struct paca_struct, rfi_flush_fallback_area)); + DEFINE(PACA_EXRFI, offsetof(struct paca_struct, exrfi)); + DEFINE(PACA_L1D_FLUSH_CONGRUENCE, offsetof(struct paca_struct, l1d_flush_congruence)); + DEFINE(PACA_L1D_FLUSH_SETS, offsetof(struct paca_struct, l1d_flush_sets)); #endif DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state)); --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1564,6 +1564,92 @@ power4_fixup_nap: blr #endif
+ .globl rfi_flush_fallback +rfi_flush_fallback: + SET_SCRATCH0(r13); + GET_PACA(r13); + std r9,PACA_EXRFI+EX_R9(r13) + std r10,PACA_EXRFI+EX_R10(r13) + std r11,PACA_EXRFI+EX_R11(r13) + std r12,PACA_EXRFI+EX_R12(r13) + std r8,PACA_EXRFI+EX_R13(r13) + mfctr r9 + ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) + ld r11,PACA_L1D_FLUSH_SETS(r13) + ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13) + /* + * The load adresses are at staggered offsets within cachelines, + * which suits some pipelines better (on others it should not + * hurt). + */ + addi r12,r12,8 + mtctr r11 + DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ + + /* order ld/st prior to dcbt stop all streams with flushing */ + sync +1: li r8,0 + .rept 8 /* 8-way set associative */ + ldx r11,r10,r8 + add r8,r8,r12 + xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not + add r8,r8,r11 // Add 0, this creates a dependency on the ldx + .endr + addi r10,r10,128 /* 128 byte cache line */ + bdnz 1b + + mtctr r9 + ld r9,PACA_EXRFI+EX_R9(r13) + ld r10,PACA_EXRFI+EX_R10(r13) + ld r11,PACA_EXRFI+EX_R11(r13) + ld r12,PACA_EXRFI+EX_R12(r13) + ld r8,PACA_EXRFI+EX_R13(r13) + GET_SCRATCH0(r13); + rfid + + .globl hrfi_flush_fallback +hrfi_flush_fallback: + SET_SCRATCH0(r13); + GET_PACA(r13); + std r9,PACA_EXRFI+EX_R9(r13) + std r10,PACA_EXRFI+EX_R10(r13) + std r11,PACA_EXRFI+EX_R11(r13) + std r12,PACA_EXRFI+EX_R12(r13) + std r8,PACA_EXRFI+EX_R13(r13) + mfctr r9 + ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) + ld r11,PACA_L1D_FLUSH_SETS(r13) + ld r12,PACA_L1D_FLUSH_CONGRUENCE(r13) + /* + * The load adresses are at staggered offsets within cachelines, + * which suits some pipelines better (on others it should not + * hurt). + */ + addi r12,r12,8 + mtctr r11 + DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ + + /* order ld/st prior to dcbt stop all streams with flushing */ + sync +1: li r8,0 + .rept 8 /* 8-way set associative */ + ldx r11,r10,r8 + add r8,r8,r12 + xor r11,r11,r11 // Ensure r11 is 0 even if fallback area is not + add r8,r8,r11 // Add 0, this creates a dependency on the ldx + .endr + addi r10,r10,128 /* 128 byte cache line */ + bdnz 1b + + mtctr r9 + ld r9,PACA_EXRFI+EX_R9(r13) + ld r10,PACA_EXRFI+EX_R10(r13) + ld r11,PACA_EXRFI+EX_R11(r13) + ld r12,PACA_EXRFI+EX_R12(r13) + ld r8,PACA_EXRFI+EX_R13(r13) + GET_SCRATCH0(r13); + hrfid + /* * Hash table stuff */ --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -834,4 +834,83 @@ static int __init disable_hardlockup_det return 0; } early_initcall(disable_hardlockup_detector); + +#ifdef CONFIG_PPC_BOOK3S_64 +static enum l1d_flush_type enabled_flush_types; +static void *l1d_flush_fallback_area; +bool rfi_flush; + +static void do_nothing(void *unused) +{ + /* + * We don't need to do the flush explicitly, just enter+exit kernel is + * sufficient, the RFI exit handlers will do the right thing. + */ +} + +void rfi_flush_enable(bool enable) +{ + if (rfi_flush == enable) + return; + + if (enable) { + do_rfi_flush_fixups(enabled_flush_types); + on_each_cpu(do_nothing, NULL, 1); + } else + do_rfi_flush_fixups(L1D_FLUSH_NONE); + + rfi_flush = enable; +} + +static void init_fallback_flush(void) +{ + u64 l1d_size, limit; + int cpu; + + l1d_size = ppc64_caches.dsize; + limit = min(safe_stack_limit(), ppc64_rma_size); + + /* + * Align to L1d size, and size it at 2x L1d size, to catch possible + * hardware prefetch runoff. We don't have a recipe for load patterns to + * reliably avoid the prefetcher. + */ + l1d_flush_fallback_area = __va(memblock_alloc_base(l1d_size * 2, l1d_size, limit)); + memset(l1d_flush_fallback_area, 0, l1d_size * 2); + + for_each_possible_cpu(cpu) { + /* + * The fallback flush is currently coded for 8-way + * associativity. Different associativity is possible, but it + * will be treated as 8-way and may not evict the lines as + * effectively. + * + * 128 byte lines are mandatory. + */ + u64 c = l1d_size / 8; + + paca[cpu].rfi_flush_fallback_area = l1d_flush_fallback_area; + paca[cpu].l1d_flush_congruence = c; + paca[cpu].l1d_flush_sets = c / 128; + } +} + +void __init setup_rfi_flush(enum l1d_flush_type types, bool enable) +{ + if (types & L1D_FLUSH_FALLBACK) { + pr_info("rfi-flush: Using fallback displacement flush\n"); + init_fallback_flush(); + } + + if (types & L1D_FLUSH_ORI) + pr_info("rfi-flush: Using ori type flush\n"); + + if (types & L1D_FLUSH_MTTRIG) + pr_info("rfi-flush: Using mttrig type flush\n"); + + enabled_flush_types = types; + + rfi_flush_enable(enable); +} +#endif /* CONFIG_PPC_BOOK3S_64 */ #endif --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -72,6 +72,15 @@ SECTIONS /* Read-only data */ RODATA
+#ifdef CONFIG_PPC64 + . = ALIGN(8); + __rfi_flush_fixup : AT(ADDR(__rfi_flush_fixup) - LOAD_OFFSET) { + __start___rfi_flush_fixup = .; + *(__rfi_flush_fixup) + __stop___rfi_flush_fixup = .; + } +#endif + EXCEPTION_TABLE(0)
NOTES :kernel :notes --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -20,6 +20,7 @@ #include <asm/code-patching.h> #include <asm/page.h> #include <asm/sections.h> +#include <asm/setup.h>
struct fixup_entry { @@ -113,6 +114,47 @@ void do_feature_fixups(unsigned long val } }
+#ifdef CONFIG_PPC_BOOK3S_64 +void do_rfi_flush_fixups(enum l1d_flush_type types) +{ + unsigned int instrs[3], *dest; + long *start, *end; + int i; + + start = PTRRELOC(&__start___rfi_flush_fixup), + end = PTRRELOC(&__stop___rfi_flush_fixup); + + instrs[0] = 0x60000000; /* nop */ + instrs[1] = 0x60000000; /* nop */ + instrs[2] = 0x60000000; /* nop */ + + if (types & L1D_FLUSH_FALLBACK) + /* b .+16 to fallback flush */ + instrs[0] = 0x48000010; + + i = 0; + if (types & L1D_FLUSH_ORI) { + instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */ + instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/ + } + + if (types & L1D_FLUSH_MTTRIG) + instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */ + + for (i = 0; start < end; start++, i++) { + dest = (void *)start + *start; + + pr_devel("patching dest %lx\n", (unsigned long)dest); + + patch_instruction(dest, instrs[0]); + patch_instruction(dest + 1, instrs[1]); + patch_instruction(dest + 2, instrs[2]); + } + + printk(KERN_DEBUG "rfi-flush: patched %d locations\n", i); +} +#endif /* CONFIG_PPC_BOOK3S_64 */ + void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end) { long *start, *end;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman mpe@ellerman.id.au
commit bc9c9304a45480797e13a8e1df96ffcf44fb62fe upstream.
Because there may be some performance overhead of the RFI flush, add kernel command line options to disable it.
We add a sensibly named 'no_rfi_flush' option, but we also hijack the x86 option 'nopti'. The RFI flush is not the same as KPTI, but if we see 'nopti' we can guess that the user is trying to avoid any overhead of Meltdown mitigations, and it means we don't have to educate every one about a different command line option.
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/setup_64.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -838,8 +838,29 @@ early_initcall(disable_hardlockup_detect #ifdef CONFIG_PPC_BOOK3S_64 static enum l1d_flush_type enabled_flush_types; static void *l1d_flush_fallback_area; +static bool no_rfi_flush; bool rfi_flush;
+static int __init handle_no_rfi_flush(char *p) +{ + pr_info("rfi-flush: disabled on command line."); + no_rfi_flush = true; + return 0; +} +early_param("no_rfi_flush", handle_no_rfi_flush); + +/* + * The RFI flush is not KPTI, but because users will see doco that says to use + * nopti we hijack that option here to also disable the RFI flush. + */ +static int __init handle_no_pti(char *p) +{ + pr_info("rfi-flush: disabling due to 'nopti' on command line.\n"); + handle_no_rfi_flush(NULL); + return 0; +} +early_param("nopti", handle_no_pti); + static void do_nothing(void *unused) { /* @@ -910,7 +931,8 @@ void __init setup_rfi_flush(enum l1d_flu
enabled_flush_types = types;
- rfi_flush_enable(enable); + if (!no_rfi_flush) + rfi_flush_enable(enable); } #endif /* CONFIG_PPC_BOOK3S_64 */ #endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling mikey@neuling.org
commit 8989d56878a7735dfdb234707a2fee6faf631085 upstream.
A new hypervisor call is available which tells the guest settings related to the RFI flush. Use it to query the appropriate flush instruction(s), and whether the flush is required.
Signed-off-by: Michael Neuling mikey@neuling.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/platforms/pseries/setup.c | 37 ++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-)
--- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -499,6 +499,39 @@ static void __init find_and_init_phbs(vo of_pci_check_probe_only(); }
+static void pseries_setup_rfi_flush(void) +{ + struct h_cpu_char_result result; + enum l1d_flush_type types; + bool enable; + long rc; + + /* Enable by default */ + enable = true; + + rc = plpar_get_cpu_characteristics(&result); + if (rc == H_SUCCESS) { + types = L1D_FLUSH_NONE; + + if (result.character & H_CPU_CHAR_L1D_FLUSH_TRIG2) + types |= L1D_FLUSH_MTTRIG; + if (result.character & H_CPU_CHAR_L1D_FLUSH_ORI30) + types |= L1D_FLUSH_ORI; + + /* Use fallback if nothing set in hcall */ + if (types == L1D_FLUSH_NONE) + types = L1D_FLUSH_FALLBACK; + + if (!(result.behaviour & H_CPU_BEHAV_L1D_FLUSH_PR)) + enable = false; + } else { + /* Default to fallback if case hcall is not available */ + types = L1D_FLUSH_FALLBACK; + } + + setup_rfi_flush(types, enable); +} + static void __init pSeries_setup_arch(void) { set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT); @@ -515,7 +548,9 @@ static void __init pSeries_setup_arch(vo
fwnmi_init();
- /* By default, only probe PCI (can be overriden by rtas_pci) */ + pseries_setup_rfi_flush(); + + /* By default, only probe PCI (can be overridden by rtas_pci) */ pci_add_flags(PCI_PROBE_ONLY);
/* Find and initialize PCI host bridges */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver O'Halloran oohall@gmail.com
commit 6e032b350cd1fdb830f18f8320ef0e13b4e24094 upstream.
New device-tree properties are available which tell the hypervisor settings related to the RFI flush. Use them to determine the appropriate flush instruction to use, and whether the flush is required.
Signed-off-by: Oliver O'Halloran oohall@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/platforms/powernv/setup.c | 50 +++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)
--- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -35,13 +35,63 @@ #include <asm/opal.h> #include <asm/kexec.h> #include <asm/smp.h> +#include <asm/tm.h> +#include <asm/setup.h>
#include "powernv.h"
+static void pnv_setup_rfi_flush(void) +{ + struct device_node *np, *fw_features; + enum l1d_flush_type type; + int enable; + + /* Default to fallback in case fw-features are not available */ + type = L1D_FLUSH_FALLBACK; + enable = 1; + + np = of_find_node_by_name(NULL, "ibm,opal"); + fw_features = of_get_child_by_name(np, "fw-features"); + of_node_put(np); + + if (fw_features) { + np = of_get_child_by_name(fw_features, "inst-l1d-flush-trig2"); + if (np && of_property_read_bool(np, "enabled")) + type = L1D_FLUSH_MTTRIG; + + of_node_put(np); + + np = of_get_child_by_name(fw_features, "inst-l1d-flush-ori30,30,0"); + if (np && of_property_read_bool(np, "enabled")) + type = L1D_FLUSH_ORI; + + of_node_put(np); + + /* Enable unless firmware says NOT to */ + enable = 2; + np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-hv-1-to-0"); + if (np && of_property_read_bool(np, "disabled")) + enable--; + + of_node_put(np); + + np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-pr-0-to-1"); + if (np && of_property_read_bool(np, "disabled")) + enable--; + + of_node_put(np); + of_node_put(fw_features); + } + + setup_rfi_flush(type, enable > 0); +} + static void __init pnv_setup_arch(void) { set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
+ pnv_setup_rfi_flush(); + /* Initialize SMP */ pnv_smp_init();
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman mpe@ellerman.id.au
commit fd6e440f20b1a4304553775fc55938848ff617c9 upstream.
The recent commit 87590ce6e373 ("sysfs/cpu: Add vulnerability folder") added a generic folder and set of files for reporting information on CPU vulnerabilities. One of those was for meltdown:
/sys/devices/system/cpu/vulnerabilities/meltdown
This commit wires up that file for 64-bit Book3S powerpc.
For now we default to "Vulnerable" unless the RFI flush is enabled. That may not actually be true on all hardware, further patches will refine the reporting based on the CPU/platform etc. But for now we default to being pessimists.
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/Kconfig | 1 + arch/powerpc/kernel/setup_64.c | 8 ++++++++ 2 files changed, 9 insertions(+)
--- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -136,6 +136,7 @@ config PPC select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE select GENERIC_TIME_VSYSCALL_OLD + select GENERIC_CPU_VULNERABILITIES if PPC_BOOK3S_64 select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -934,5 +934,13 @@ void __init setup_rfi_flush(enum l1d_flu if (!no_rfi_flush) rfi_flush_enable(enable); } + +ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) +{ + if (rfi_flush) + return sprintf(buf, "Mitigation: RFI Flush\n"); + + return sprintf(buf, "Vulnerable\n"); +} #endif /* CONFIG_PPC_BOOK3S_64 */ #endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman mpe@ellerman.id.au
commit 236003e6b5443c45c18e613d2b0d776a9f87540e upstream.
Expose the state of the RFI flush (enabled/disabled) via debugfs, and allow it to be enabled/disabled at runtime.
eg: $ cat /sys/kernel/debug/powerpc/rfi_flush 1 $ echo 0 > /sys/kernel/debug/powerpc/rfi_flush $ cat /sys/kernel/debug/powerpc/rfi_flush 0
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Reviewed-by: Nicholas Piggin npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/setup_64.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
--- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -38,6 +38,7 @@ #include <linux/hugetlb.h> #include <linux/memory.h> #include <linux/nmi.h> +#include <linux/debugfs.h>
#include <asm/io.h> #include <asm/kdump.h> @@ -935,6 +936,35 @@ void __init setup_rfi_flush(enum l1d_flu rfi_flush_enable(enable); }
+#ifdef CONFIG_DEBUG_FS +static int rfi_flush_set(void *data, u64 val) +{ + if (val == 1) + rfi_flush_enable(true); + else if (val == 0) + rfi_flush_enable(false); + else + return -EINVAL; + + return 0; +} + +static int rfi_flush_get(void *data, u64 *val) +{ + *val = rfi_flush ? 1 : 0; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n"); + +static __init int rfi_flush_debugfs_init(void) +{ + debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush); + return 0; +} +device_initcall(rfi_flush_debugfs_init); +#endif + ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) { if (rfi_flush)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jesse Chan jc@linux.com
commit 0cab20cec0b663b7be8e2be5998d5a4113647f86 upstream.
This change resolves a new compile-time warning when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o see include/linux/module.h for more information
This adds the license as "GPL v2", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan jc@linux.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- sound/soc/codecs/pcm512x-spi.c | 4 ++++ 1 file changed, 4 insertions(+)
--- a/sound/soc/codecs/pcm512x-spi.c +++ b/sound/soc/codecs/pcm512x-spi.c @@ -70,3 +70,7 @@ static struct spi_driver pcm512x_spi_dri };
module_spi_driver(pcm512x_spi_driver); + +MODULE_DESCRIPTION("ASoC PCM512x codec driver - SPI"); +MODULE_AUTHOR("Mark Brown broonie@kernel.org"); +MODULE_LICENSE("GPL v2");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan shuahkh@osg.samsung.com
Upstream commit 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed support")
vhci_hcd clears all the bits port_status bits instead of clearing just the USB_PORT_STAT_POWER bit when it handles ClearPortFeature: USB_PORT_FEAT_POWER. This causes vhci_hcd attach to fail in a bad state, leaving device unusable by the client. The device is still attached and however client can't use it.
The problem was fixed as part of larger change to add USB3 Super Speed support.
This patch isolates the one line fix to clear the USB_PORT_STAT_POWER from the original patch.
Signed-off-by: Shuah Khan shuahkh@osg.samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/usbip/vhci_hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -285,7 +285,7 @@ static int vhci_hub_control(struct usb_h case USB_PORT_FEAT_POWER: usbip_dbg_vhci_rh( " ClearPortFeature: USB_PORT_FEAT_POWER\n"); - dum->port_status[rhport] = 0; + dum->port_status[rhport] &= ~USB_PORT_STAT_POWER; dum->resuming = 0; break; case USB_PORT_FEAT_C_RESET:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan shuahkh@osg.samsung.com
Commit 3eee23c3ec14 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address") backported the following commit from mailine. However, backport error caused the tcp_socket address to still leak.
commit 2f2d0088eb93 ("usbip: prevent vhci_hcd driver from leaking a socket pointer address")
When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the
/sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run.
Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}.
As this opens a security hole, the fix replaces socket pointer address with sockfd.
Reported-by: Eric Biggers ebiggers3@gmail.com Signed-off-by: Shuah Khan shuahkh@osg.samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/usbip/vhci_sysfs.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
--- a/drivers/usb/usbip/vhci_sysfs.c +++ b/drivers/usb/usbip/vhci_sysfs.c @@ -53,7 +53,7 @@ static ssize_t status_show(struct device * a security hole, the change is made to use sockfd instead. */ out += sprintf(out, - "prt sta spd bus dev sockfd local_busid\n"); + "prt sta spd dev sockfd local_busid\n");
for (i = 0; i < VHCI_NPORTS; i++) { struct vhci_device *vdev = port_to_vdev(i); @@ -64,12 +64,11 @@ static ssize_t status_show(struct device if (vdev->ud.status == VDEV_ST_USED) { out += sprintf(out, "%03u %08x ", vdev->speed, vdev->devid); - out += sprintf(out, "%16p ", vdev->ud.tcp_socket); - out += sprintf(out, "%06u", vdev->ud.sockfd); + out += sprintf(out, "%06u ", vdev->ud.sockfd); out += sprintf(out, "%s", dev_name(&vdev->udev->dev));
} else - out += sprintf(out, "000 000 000 000000 0-0"); + out += sprintf(out, "000 00000000 000000 0-0");
out += sprintf(out, "\n"); spin_unlock(&vdev->ud.lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Hintzmann matthias.dev@gmx.de
ctx->drvflags is checked in the if clause before beeing initialized. Move initialization before first usage.
Note, that the if clause was backported with commit 75f82a703b30 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") from mainline (upstream commit 2b02c20ce0c2 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices"). In mainline, the initialization is at the right place before the if clause.
[mrkiko.rs@gmail.com: commit message tweaks]
Fixes: 75f82a703b30 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Signed-off-by: Matthias Hintzmann matthias.dev@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/usb/cdc_ncm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -825,6 +825,9 @@ int cdc_ncm_bind_common(struct usbnet *d goto error2; }
+ /* Device-specific flags */ + ctx->drvflags = drvflags; + /* * Some Huawei devices have been observed to come out of reset in NDP32 mode. * Let's check if this is the case, and set the device to NDP16 mode again if @@ -873,9 +876,6 @@ int cdc_ncm_bind_common(struct usbnet *d /* finish setting up the device specific data */ cdc_ncm_setup(dev);
- /* Device-specific flags */ - ctx->drvflags = drvflags; - /* Allocate the delayed NDP if needed. */ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) { ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Scheel julian@jusst.de
commit 7ac45d1635a4cd2e99a4b11903d4a2815ca1b27b upstream.
In case cpu could not be found the error message would always refer to /codec/ not being found in DT. Fix this by catching the cpu node not found case explicitly.
Signed-off-by: Julian Scheel julian@jusst.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: thongsyho thong.ho.px@rvc.renesas.com Signed-off-by: Nhan Nguyen nhan.nguyen.yb@renesas.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/generic/simple-card.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
--- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -343,13 +343,19 @@ static int asoc_simple_card_dai_link_of( snprintf(prop, sizeof(prop), "%scpu", prefix); cpu = of_get_child_by_name(node, prop);
+ if (!cpu) { + ret = -EINVAL; + dev_err(dev, "%s: Can't find %s DT node\n", __func__, prop); + goto dai_link_of_err; + } + snprintf(prop, sizeof(prop), "%splat", prefix); plat = of_get_child_by_name(node, prop);
snprintf(prop, sizeof(prop), "%scodec", prefix); codec = of_get_child_by_name(node, prop);
- if (!cpu || !codec) { + if (!codec) { ret = -EINVAL; dev_err(dev, "%s: Can't find %s DT node\n", __func__, prop); goto dai_link_of_err;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
commit 1f8754d4daea5f257370a52a30fcb22798c54516 upstream.
If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue.
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Tested-by: Hiroyuki Yokoyama hiroyuki.yokoyama.vx@renesas.com Reported-by: Hiroyuki Yokoyama hiroyuki.yokoyama.vx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: thongsyho thong.ho.px@rvc.renesas.com Signed-off-by: Nhan Nguyen nhan.nguyen.yb@renesas.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/sh/rcar/rsnd.h | 2 ++ sound/soc/sh/rcar/ssi.c | 5 +++++ 2 files changed, 7 insertions(+)
--- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -235,6 +235,7 @@ enum rsnd_mod_type { RSND_MOD_MIX, RSND_MOD_CTU, RSND_MOD_SRC, + RSND_MOD_SSIP, /* SSI parent */ RSND_MOD_SSI, RSND_MOD_MAX, }; @@ -365,6 +366,7 @@ struct rsnd_dai_stream { }; #define rsnd_io_to_mod(io, i) ((i) < RSND_MOD_MAX ? (io)->mod[(i)] : NULL) #define rsnd_io_to_mod_ssi(io) rsnd_io_to_mod((io), RSND_MOD_SSI) +#define rsnd_io_to_mod_ssip(io) rsnd_io_to_mod((io), RSND_MOD_SSIP) #define rsnd_io_to_mod_src(io) rsnd_io_to_mod((io), RSND_MOD_SRC) #define rsnd_io_to_mod_ctu(io) rsnd_io_to_mod((io), RSND_MOD_CTU) #define rsnd_io_to_mod_mix(io) rsnd_io_to_mod((io), RSND_MOD_MIX) --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -550,11 +550,16 @@ static int rsnd_ssi_dma_remove(struct rs struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io); struct device *dev = rsnd_priv_to_dev(priv); int irq = ssi->info->irq;
rsnd_dma_quit(io, rsnd_mod_to_dma(mod));
+ /* Do nothing for SSI parent mod */ + if (ssi_parent_mod == mod) + return 0; + /* PIO will request IRQ again */ devm_free_irq(dev, irq, mod);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
commit e0936c3471a8411a5df327641fa3ffe12a2fb07b upstream.
commit 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") fixed Parent SSI duplicate free_irq(). But on Renesas Sound, not only Parent SSI but also Multi SSI have same issue. This patch avoid duplicate free_irq() if it was not pure SSI.
Fixes: 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: thongsyho thong.ho.px@rvc.renesas.com Signed-off-by: Nhan Nguyen nhan.nguyen.yb@renesas.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/soc/sh/rcar/ssi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -550,14 +550,14 @@ static int rsnd_ssi_dma_remove(struct rs struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); - struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io); + struct rsnd_mod *pure_ssi_mod = rsnd_io_to_mod_ssi(io); struct device *dev = rsnd_priv_to_dev(priv); int irq = ssi->info->irq;
rsnd_dma_quit(io, rsnd_mod_to_dma(mod));
- /* Do nothing for SSI parent mod */ - if (ssi_parent_mod == mod) + /* Do nothing if non SSI (= SSI parent, multi SSI) mod */ + if (pure_ssi_mod != mod) return 0;
/* PIO will request IRQ again */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
commit cbbb90b0c084d7dfb2ed8e3fecf8df200fbdd2a0 upstream.
When implementing support for interlaced modes, the driver switched from reporting vblank events on the vertical blanking (VBK) interrupt to the frame end interrupt (FRM). This incorrectly divided the reported refresh rate by two. Fix it by moving back to the VBK interrupt.
Fixes: 906eff7fcada ("drm: rcar-du: Implement support for interlaced modes") Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Reviewed-by: Kieran Bingham kieran.bingham+renesas@ideasonboard.com Signed-off-by: thongsyho thong.ho.px@rvc.renesas.com Signed-off-by: Nhan Nguyen nhan.nguyen.yb@renesas.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -531,7 +531,7 @@ static irqreturn_t rcar_du_crtc_irq(int status = rcar_du_crtc_read(rcrtc, DSSR); rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
- if (status & DSSR_FRM) { + if (status & DSSR_VBK) { drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index); rcar_du_crtc_finish_page_flip(rcrtc); ret = IRQ_HANDLED;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
commit 641307df71fe77d7b38a477067495ede05d47295 upstream.
When stopping the CRTC the driver must disable all planes and wait for the change to take effect at the next vblank. Merely calling drm_crtc_wait_one_vblank() is not enough, as the function doesn't include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that handles the vblank interrupt race.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Reviewed-by: Kieran Bingham kieran.bingham+renesas@ideasonboard.com Signed-off-by: thongsyho thong.ho.px@rvc.renesas.com Signed-off-by: Nhan Nguyen nhan.nguyen.yb@renesas.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 54 +++++++++++++++++++++++++++++---- drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 8 ++++ 2 files changed, 56 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -371,6 +371,31 @@ static void rcar_du_crtc_start(struct rc rcrtc->started = true; }
+static void rcar_du_crtc_disable_planes(struct rcar_du_crtc *rcrtc) +{ + struct rcar_du_device *rcdu = rcrtc->group->dev; + struct drm_crtc *crtc = &rcrtc->crtc; + u32 status; + /* Make sure vblank interrupts are enabled. */ + drm_crtc_vblank_get(crtc); + /* + * Disable planes and calculate how many vertical blanking interrupts we + * have to wait for. If a vertical blanking interrupt has been triggered + * but not processed yet, we don't know whether it occurred before or + * after the planes got disabled. We thus have to wait for two vblank + * interrupts in that case. + */ + spin_lock_irq(&rcrtc->vblank_lock); + rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0); + status = rcar_du_crtc_read(rcrtc, DSSR); + rcrtc->vblank_count = status & DSSR_VBK ? 2 : 1; + spin_unlock_irq(&rcrtc->vblank_lock); + if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0, + msecs_to_jiffies(100))) + dev_warn(rcdu->dev, "vertical blanking timeout\n"); + drm_crtc_vblank_put(crtc); +} + static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc) { struct drm_crtc *crtc = &rcrtc->crtc; @@ -379,17 +404,16 @@ static void rcar_du_crtc_stop(struct rca return;
/* Disable all planes and wait for the change to take effect. This is - * required as the DSnPR registers are updated on vblank, and no vblank - * will occur once the CRTC is stopped. Disabling planes when starting - * the CRTC thus wouldn't be enough as it would start scanning out - * immediately from old frame buffers until the next vblank. + * required as the plane enable registers are updated on vblank, and no + * vblank will occur once the CRTC is stopped. Disabling planes when + * starting the CRTC thus wouldn't be enough as it would start scanning + * out immediately from old frame buffers until the next vblank. * * This increases the CRTC stop delay, especially when multiple CRTCs * are stopped in one operation as we now wait for one vblank per CRTC. * Whether this can be improved needs to be researched. */ - rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0); - drm_crtc_wait_one_vblank(crtc); + rcar_du_crtc_disable_planes(rcrtc);
/* Disable vertical blanking interrupt reporting. We first need to wait * for page flip completion before stopping the CRTC as userspace @@ -528,10 +552,26 @@ static irqreturn_t rcar_du_crtc_irq(int irqreturn_t ret = IRQ_NONE; u32 status;
+ spin_lock(&rcrtc->vblank_lock); + status = rcar_du_crtc_read(rcrtc, DSSR); rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK);
if (status & DSSR_VBK) { + /* + * Wake up the vblank wait if the counter reaches 0. This must + * be protected by the vblank_lock to avoid races in + * rcar_du_crtc_disable_planes(). + */ + if (rcrtc->vblank_count) { + if (--rcrtc->vblank_count == 0) + wake_up(&rcrtc->vblank_wait); + } + } + + spin_unlock(&rcrtc->vblank_lock); + + if (status & DSSR_VBK) { drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index); rcar_du_crtc_finish_page_flip(rcrtc); ret = IRQ_HANDLED; @@ -585,6 +625,8 @@ int rcar_du_crtc_create(struct rcar_du_g }
init_waitqueue_head(&rcrtc->flip_wait); + init_waitqueue_head(&rcrtc->vblank_wait); + spin_lock_init(&rcrtc->vblank_lock);
rcrtc->group = rgrp; rcrtc->mmio_offset = mmio_offsets[index]; --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h @@ -15,6 +15,7 @@ #define __RCAR_DU_CRTC_H__
#include <linux/mutex.h> +#include <linux/spinlock.h> #include <linux/wait.h>
#include <drm/drmP.h> @@ -32,6 +33,9 @@ struct rcar_du_group; * @started: whether the CRTC has been started and is running * @event: event to post when the pending page flip completes * @flip_wait: wait queue used to signal page flip completion + * @vblank_lock: protects vblank_wait and vblank_count + * @vblank_wait: wait queue used to signal vertical blanking + * @vblank_count: number of vertical blanking interrupts to wait for * @outputs: bitmask of the outputs (enum rcar_du_output) driven by this CRTC * @enabled: whether the CRTC is enabled, used to control system resume * @group: CRTC group this CRTC belongs to @@ -48,6 +52,10 @@ struct rcar_du_crtc { struct drm_pending_vblank_event *event; wait_queue_head_t flip_wait;
+ spinlock_t vblank_lock; + wait_queue_head_t vblank_wait; + unsigned int vblank_count; + unsigned int outputs; bool enabled;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf jpoimboe@redhat.com
commit 520a13c530aeb5f63e011d668c42db1af19ed349 upstream.
The kernel test bot (run by Xiaolong Ye) reported that the following commit:
f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang")
is causing double faults in a kernel compiled with GCC 4.4.
Linus subsequently diagnosed the crash pattern and the buggy commit and found that the issue is with this code:
register unsigned int __asm_call_sp asm("esp"); #define ASM_CALL_CONSTRAINT "+r" (__asm_call_sp)
Even on a 64-bit kernel, it's using ESP instead of RSP. That causes GCC to produce the following bogus code:
ffffffff8147461d: 89 e0 mov %esp,%eax ffffffff8147461f: 4c 89 f7 mov %r14,%rdi ffffffff81474622: 4c 89 fe mov %r15,%rsi ffffffff81474625: ba 20 00 00 00 mov $0x20,%edx ffffffff8147462a: 89 c4 mov %eax,%esp ffffffff8147462c: e8 bf 52 05 00 callq ffffffff814c98f0 <copy_user_generic_unrolled>
Despite the absurdity of it backing up and restoring the stack pointer for no reason, the bug is actually the fact that it's only backing up and restoring the lower 32 bits of the stack pointer. The upper 32 bits are getting cleared out, corrupting the stack pointer.
So change the '__asm_call_sp' register variable to be associated with the actual full-size stack pointer.
This also requires changing the __ASM_SEL() macro to be based on the actual compiled arch size, rather than the CONFIG value, because CONFIG_X86_64 compiles some files with '-m32' (e.g., realmode and vdso). Otherwise Clang fails to build the kernel because it complains about the use of a 64-bit register (RSP) in a 32-bit file.
Reported-and-Bisected-and-Tested-by: kernel test robot xiaolong.ye@intel.com Diagnosed-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Cc: Alexander Potapenko glider@google.com Cc: Andrey Ryabinin aryabinin@virtuozzo.com Cc: Andy Lutomirski luto@kernel.org Cc: Arnd Bergmann arnd@arndb.de Cc: Dmitriy Vyukov dvyukov@google.com Cc: LKP lkp@01.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Matthias Kaehlcke mka@chromium.org Cc: Miguel Bernal Marin miguel.bernal.marin@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: f5caf621ee35 ("x86/asm: Fix inline asm call constraints for Clang") Link: http://lkml.kernel.org/r/20170928215826.6sdpmwtkiydiytim@treble Signed-off-by: Ingo Molnar mingo@kernel.org Cc: Matthias Kaehlcke mka@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/include/asm/asm.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -11,10 +11,12 @@ # define __ASM_FORM_COMMA(x) " " #x "," #endif
-#ifdef CONFIG_X86_32 +#ifndef __x86_64__ +/* 32 bit */ # define __ASM_SEL(a,b) __ASM_FORM(a) # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(a) #else +/* 64 bit */ # define __ASM_SEL(a,b) __ASM_FORM(b) # define __ASM_SEL_RAW(a,b) __ASM_FORM_RAW(b) #endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov nikolay@cumulusnetworks.com
[ Upstream commit 4adfa79fc254efb7b0eb3cd58f62c2c3f805f1ba ]
When we dump the ip6mr mfc entries via proc, we initialize an iterator with the table to dump but we don't clear the cache pointer which might be initialized from a prior read on the same descriptor that ended. This can result in lock imbalance (an unnecessary unlock) leading to other crashes and hangs. Clear the cache pointer like ipmr does to fix the issue. Thanks for the reliable reproducer.
Here's syzbot's trace: WARNING: bad unlock balance detected! 4.15.0-rc3+ #128 Not tainted syzkaller971460/3195 is trying to release lock (mrt_lock) at: [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 but there are no more locks to release!
other info that might help us debug this: 1 lock held by syzkaller971460/3195: #0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0 fs/seq_file.c:165
stack backtrace: CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561 __lock_release kernel/locking/lockdep.c:3775 [inline] lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023 __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 traverse+0x3bc/0xa00 fs/seq_file.c:135 seq_read+0x96a/0x13d0 fs/seq_file.c:189 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 BUG: sleeping function called from invalid context at lib/usercopy.c:25 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460 INFO: lockdep is turned off. CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060 __might_sleep+0x95/0x190 kernel/sched/core.c:6013 __might_fault+0xab/0x1d0 mm/memory.c:4525 _copy_to_user+0x2c/0xc0 lib/usercopy.c:25 copy_to_user include/linux/uaccess.h:155 [inline] seq_read+0xcb4/0x13d0 fs/seq_file.c:279 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0 lib/usercopy.c:26
Reported-by: syzbot bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov nikolay@cumulusnetworks.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/ip6mr.c | 1 + 1 file changed, 1 insertion(+)
--- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -495,6 +495,7 @@ static void *ipmr_mfc_seq_start(struct s return ERR_PTR(-ENOENT);
it->mrt = mrt; + it->cache = NULL; return *pos ? ipmr_mfc_seq_idx(net, seq->private, *pos - 1) : SEQ_START_TOKEN; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit e7aadb27a5415e8125834b84a74477bfbee4eff5 ]
Newly added igmpv3_get_srcaddr() needs to be called under rcu lock.
Timer callbacks do not ensure this locking.
============================= WARNING: suspicious RCU usage 4.15.0+ #200 Not tainted ----------------------------- ./include/linux/inetdevice.h:216 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syzkaller616973/4074: #0: (&mm->mmap_sem){++++}, at: [<00000000bfce669e>] __do_page_fault+0x32d/0xc90 arch/x86/mm/fault.c:1355 #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] lockdep_copy_map include/linux/lockdep.h:178 [inline] #1: ((&im->timer)){+.-.}, at: [<00000000619d2f71>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1316 #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] spin_lock_bh include/linux/spinlock.h:315 [inline] #2: (&(&im->lock)->rlock){+.-.}, at: [<000000005f833c5c>] igmpv3_send_report+0x98/0x5b0 net/ipv4/igmp.c:600
stack backtrace: CPU: 0 PID: 4074 Comm: syzkaller616973 Not tainted 4.15.0+ #200 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4592 __in_dev_get_rcu include/linux/inetdevice.h:216 [inline] igmpv3_get_srcaddr net/ipv4/igmp.c:329 [inline] igmpv3_newpack+0xeef/0x12e0 net/ipv4/igmp.c:389 add_grhead.isra.27+0x235/0x300 net/ipv4/igmp.c:432 add_grec+0xbd3/0x1170 net/ipv4/igmp.c:565 igmpv3_send_report+0xd5/0x5b0 net/ipv4/igmp.c:605 igmp_send_report+0xc43/0x1050 net/ipv4/igmp.c:722 igmp_timer_expire+0x322/0x5c0 net/ipv4/igmp.c:831 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:938
Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports") Signed-off-by: Eric Dumazet edumazet@google.com Reported-by: syzbot syzkaller@googlegroups.com
Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/igmp.c | 4 ++++ 1 file changed, 4 insertions(+)
--- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -392,7 +392,11 @@ static struct sk_buff *igmpv3_newpack(st pip->frag_off = htons(IP_DF); pip->ttl = 1; pip->daddr = fl4.daddr; + + rcu_read_lock(); pip->saddr = igmpv3_get_srcaddr(dev, &fl4); + rcu_read_unlock(); + pip->protocol = IPPROTO_IGMP; pip->tot_len = 0; /* filled in later */ ip_select_ident(net, skb, NULL);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Junxiao Bi junxiao.bi@oracle.com
[ Upstream commit 233ac3891607f501f08879134d623b303838f478 ]
The following soft lockup was caught. This is a deadlock caused by recusive locking.
Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh..
[161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
Signed-off-by: Junxiao Bi junxiao.bi@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3850,7 +3850,7 @@ static void qlcnic_83xx_flush_mbx_queue( struct list_head *head = &mbx->cmd_q; struct qlcnic_cmd_args *cmd = NULL;
- spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock);
while (!list_empty(head)) { cmd = list_entry(head->next, struct qlcnic_cmd_args, list); @@ -3861,7 +3861,7 @@ static void qlcnic_83xx_flush_mbx_queue( qlcnic_83xx_notify_cmd_completion(adapter, cmd); }
- spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); }
static int qlcnic_83xx_check_mbx_status(struct qlcnic_adapter *adapter) @@ -3897,12 +3897,12 @@ static void qlcnic_83xx_dequeue_mbx_cmd( { struct qlcnic_mailbox *mbx = adapter->ahw->mailbox;
- spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock);
list_del(&cmd->list); mbx->num_cmds--;
- spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock);
qlcnic_83xx_notify_cmd_completion(adapter, cmd); } @@ -3967,7 +3967,7 @@ static int qlcnic_83xx_enqueue_mbx_cmd(s init_completion(&cmd->completion); cmd->rsp_opcode = QLC_83XX_MBX_RESPONSE_UNKNOWN;
- spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock);
list_add_tail(&cmd->list, &mbx->cmd_q); mbx->num_cmds++; @@ -3975,7 +3975,7 @@ static int qlcnic_83xx_enqueue_mbx_cmd(s *timeout = cmd->total_cmds * QLC_83XX_MBX_TIMEOUT; queue_work(mbx->work_q, &mbx->work);
- spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock);
return 0; } @@ -4071,15 +4071,15 @@ static void qlcnic_83xx_mailbox_worker(s mbx->rsp_status = QLC_83XX_MBX_RESPONSE_WAIT; spin_unlock_irqrestore(&mbx->aen_lock, flags);
- spin_lock(&mbx->queue_lock); + spin_lock_bh(&mbx->queue_lock);
if (list_empty(head)) { - spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock); return; } cmd = list_entry(head->next, struct qlcnic_cmd_args, list);
- spin_unlock(&mbx->queue_lock); + spin_unlock_bh(&mbx->queue_lock);
mbx_ops->encode_cmd(adapter, cmd); mbx_ops->nofity_fw(adapter, QLC_83XX_MBX_REQUEST);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chunhao Lin hau@realtek.com
[ Upstream commit 086ca23d03c0d2f4088f472386778d293e15c5f6 ]
Driver check the wrong register bit in rtl_ocp_tx_cond() that keep driver waiting until timeout.
Fix this by waiting for the right register bit.
Signed-off-by: Chunhao Lin hau@realtek.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1387,7 +1387,7 @@ DECLARE_RTL_COND(rtl_ocp_tx_cond) { void __iomem *ioaddr = tp->mmio_addr;
- return RTL_R8(IBISR0) & 0x02; + return RTL_R8(IBISR0) & 0x20; }
static void rtl8168ep_stop_cmac(struct rtl8169_private *tp) @@ -1395,7 +1395,7 @@ static void rtl8168ep_stop_cmac(struct r void __iomem *ioaddr = tp->mmio_addr;
RTL_W8(IBCR2, RTL_R8(IBCR2) & ~0x01); - rtl_msleep_loop_wait_low(tp, &rtl_ocp_tx_cond, 50, 2000); + rtl_msleep_loop_wait_high(tp, &rtl_ocp_tx_cond, 50, 2000); RTL_W8(IBISR0, RTL_R8(IBISR0) | 0x20); RTL_W8(IBCR0, RTL_R8(IBCR0) & ~0x01); }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li RongQing lirongqing@baidu.com
[ Upstream commit 9b42d55a66d388e4dd5550107df051a9637564fc ]
socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue
Signed-off-by: Li RongQing lirongqing@baidu.com Cc: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2276,6 +2276,12 @@ int tcp_disconnect(struct sock *sk, int
WARN_ON(inet->inet_num && !icsk->icsk_bind_hash);
+ if (sk->sk_frag.page) { + put_page(sk->sk_frag.page); + sk->sk_frag.page = NULL; + sk->sk_frag.offset = 0; + } + sk->sk_error_report(sk); return err; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang jasowang@redhat.com
[ Upstream commit 4cd879515d686849eec5f718aeac62a70b067d82 ]
We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset.
Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang jasowang@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/vhost/net.c | 1 + 1 file changed, 1 insertion(+)
--- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -981,6 +981,7 @@ static long vhost_net_reset_owner(struct } vhost_net_stop(n, &tx_sock, &rx_sock); vhost_net_flush(n); + vhost_dev_stop(&n->dev); vhost_dev_reset_owner(&n->dev, memory); vhost_net_vq_reset(n); done:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jesse Chan jc@linux.com
commit 5331aec1bf9c9da557668174e0a4bfcee39f1121 upstream.
This change resolves a new compile-time warning when built as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o see include/linux/module.h for more information
This adds the license as "GPL", which matches the header of the file.
MODULE_DESCRIPTION and MODULE_AUTHOR are also added.
Signed-off-by: Jesse Chan jc@linux.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/media/platform/soc_camera/soc_scale_crop.c | 4 ++++ 1 file changed, 4 insertions(+)
--- a/drivers/media/platform/soc_camera/soc_scale_crop.c +++ b/drivers/media/platform/soc_camera/soc_scale_crop.c @@ -405,3 +405,7 @@ void soc_camera_calc_client_output(struc mf->height = soc_camera_shift_scale(rect->height, shift, scale_v); } EXPORT_SYMBOL(soc_camera_calc_client_output); + +MODULE_DESCRIPTION("soc-camera scaling-cropping functions"); +MODULE_AUTHOR("Guennadi Liakhovetski kernel@pengutronix.de"); +MODULE_LICENSE("GPL");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers ebiggers@google.com
commit 794b4bc292f5d31739d89c0202c54e7dc9bc3add upstream.
With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.]
Cc: Mimi Zohar zohar@linux.vnet.ibm.com Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: James Morris james.l.morris@oracle.com Signed-off-by: Jin Qian jinqian@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- security/keys/encrypted-keys/encrypted.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-)
--- a/security/keys/encrypted-keys/encrypted.c +++ b/security/keys/encrypted-keys/encrypted.c @@ -141,23 +141,22 @@ static int valid_ecryptfs_desc(const cha */ static int valid_master_desc(const char *new_desc, const char *orig_desc) { - if (!memcmp(new_desc, KEY_TRUSTED_PREFIX, KEY_TRUSTED_PREFIX_LEN)) { - if (strlen(new_desc) == KEY_TRUSTED_PREFIX_LEN) - goto out; - if (orig_desc) - if (memcmp(new_desc, orig_desc, KEY_TRUSTED_PREFIX_LEN)) - goto out; - } else if (!memcmp(new_desc, KEY_USER_PREFIX, KEY_USER_PREFIX_LEN)) { - if (strlen(new_desc) == KEY_USER_PREFIX_LEN) - goto out; - if (orig_desc) - if (memcmp(new_desc, orig_desc, KEY_USER_PREFIX_LEN)) - goto out; - } else - goto out; + int prefix_len; + + if (!strncmp(new_desc, KEY_TRUSTED_PREFIX, KEY_TRUSTED_PREFIX_LEN)) + prefix_len = KEY_TRUSTED_PREFIX_LEN; + else if (!strncmp(new_desc, KEY_USER_PREFIX, KEY_USER_PREFIX_LEN)) + prefix_len = KEY_USER_PREFIX_LEN; + else + return -EINVAL; + + if (!new_desc[prefix_len]) + return -EINVAL; + + if (orig_desc && strncmp(new_desc, orig_desc, prefix_len)) + return -EINVAL; + return 0; -out: - return -EINVAL; }
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro viro@zeniv.linux.org.uk
commit 21fc61c73c3903c4c312d0802da01ec2b323d174 upstream.
kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed.
Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Jin Qian jinqian@google.com Signed-off-by: Jin Qian jinqian@android.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/ext4/inode.c | 1 + fs/ext4/namei.c | 1 + fs/ext4/symlink.c | 10 +++------- fs/f2fs/inode.c | 1 + fs/f2fs/namei.c | 5 ++--- fs/inode.c | 6 ++++++ include/linux/fs.h | 1 + 7 files changed, 15 insertions(+), 10 deletions(-)
--- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4417,6 +4417,7 @@ struct inode *ext4_iget(struct super_blo inode->i_op = &ext4_symlink_inode_operations; ext4_set_aops(inode); } + inode_nohighmem(inode); } else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) || S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) { inode->i_op = &ext4_special_inode_operations; --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -3151,6 +3151,7 @@ static int ext4_symlink(struct inode *di if ((disk_link.len > EXT4_N_BLOCKS * 4)) { if (!encryption_required) inode->i_op = &ext4_symlink_inode_operations; + inode_nohighmem(inode); ext4_set_aops(inode); /* * We cannot call page_symlink() with transaction started --- a/fs/ext4/symlink.c +++ b/fs/ext4/symlink.c @@ -45,7 +45,7 @@ static const char *ext4_encrypted_follow cpage = read_mapping_page(inode->i_mapping, 0, NULL); if (IS_ERR(cpage)) return ERR_CAST(cpage); - caddr = kmap(cpage); + caddr = page_address(cpage); caddr[size] = 0; }
@@ -75,16 +75,12 @@ static const char *ext4_encrypted_follow /* Null-terminate the name */ if (res <= plen) paddr[res] = '\0'; - if (cpage) { - kunmap(cpage); + if (cpage) page_cache_release(cpage); - } return *cookie = paddr; errout: - if (cpage) { - kunmap(cpage); + if (cpage) page_cache_release(cpage); - } kfree(paddr); return ERR_PTR(res); } --- a/fs/f2fs/inode.c +++ b/fs/f2fs/inode.c @@ -202,6 +202,7 @@ make_now: inode->i_op = &f2fs_encrypted_symlink_inode_operations; else inode->i_op = &f2fs_symlink_inode_operations; + inode_nohighmem(inode); inode->i_mapping->a_ops = &f2fs_dblock_aops; } else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) || S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) { --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -351,6 +351,7 @@ static int f2fs_symlink(struct inode *di inode->i_op = &f2fs_encrypted_symlink_inode_operations; else inode->i_op = &f2fs_symlink_inode_operations; + inode_nohighmem(inode); inode->i_mapping->a_ops = &f2fs_dblock_aops;
f2fs_lock_op(sbi); @@ -942,7 +943,7 @@ static const char *f2fs_encrypted_follow cpage = read_mapping_page(inode->i_mapping, 0, NULL); if (IS_ERR(cpage)) return ERR_CAST(cpage); - caddr = kmap(cpage); + caddr = page_address(cpage); caddr[size] = 0;
/* Symlink is encrypted */ @@ -982,13 +983,11 @@ static const char *f2fs_encrypted_follow /* Null-terminate the name */ paddr[res] = '\0';
- kunmap(cpage); page_cache_release(cpage); return *cookie = paddr; errout: kfree(cstr.name); f2fs_fname_crypto_free_buffer(&pstr); - kunmap(cpage); page_cache_release(cpage); return ERR_PTR(res); } --- a/fs/inode.c +++ b/fs/inode.c @@ -2028,3 +2028,9 @@ void inode_set_flags(struct inode *inode new_flags) != old_flags)); } EXPORT_SYMBOL(inode_set_flags); + +void inode_nohighmem(struct inode *inode) +{ + mapping_set_gfp_mask(inode->i_mapping, GFP_USER); +} +EXPORT_SYMBOL(inode_nohighmem); --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -3066,5 +3066,6 @@ static inline bool dir_relax(struct inod }
extern bool path_noexec(const struct path *path); +extern void inode_nohighmem(struct inode *inode);
#endif /* _LINUX_FS_H */
On Thu, 2018-02-15 at 16:16 +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
From: Al Viro viro@zeniv.linux.org.uk
commit 21fc61c73c3903c4c312d0802da01ec2b323d174 upstream.
kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed.
Except that this backport only updates ext4 and f2fs (and doesn't add the warning). I suppose that's all matters for Android, but it would be nice to get a more complete backport into 4.4-stable...
Ben.
Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Jin Qian jinqian@google.com Signed-off-by: Jin Qian jinqian@android.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
[...]
On Mon, Mar 05, 2018 at 12:37:59AM +0000, Ben Hutchings wrote:
On Thu, 2018-02-15 at 16:16 +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
From: Al Viro viro@zeniv.linux.org.uk
commit 21fc61c73c3903c4c312d0802da01ec2b323d174 upstream.
kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed.
Except that this backport only updates ext4 and f2fs (and doesn't add the warning). I suppose that's all matters for Android, but it would be nice to get a more complete backport into 4.4-stable...
That should be all the in-tree users of this, for 4.4, right? If not, ick. Jin, can you look into this?
thanks,
greg k-h
On Mon, Mar 05, 2018 at 07:02:45AM +0100, Greg Kroah-Hartman wrote:
On Mon, Mar 05, 2018 at 12:37:59AM +0000, Ben Hutchings wrote:
On Thu, 2018-02-15 at 16:16 +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
From: Al Viro viro@zeniv.linux.org.uk
commit 21fc61c73c3903c4c312d0802da01ec2b323d174 upstream.
kmap() in page_follow_link_light() needed to go - allowing to hold an arbitrary number of kmaps for long is a great way to deadlocking the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache symlinks inodes; done for all in-tree cases. page_follow_link_light() instrumented to yell about anything missed.
Except that this backport only updates ext4 and f2fs (and doesn't add the warning). I suppose that's all matters for Android, but it would be nice to get a more complete backport into 4.4-stable...
That should be all the in-tree users of this, for 4.4, right? If not, ick. Jin, can you look into this?
thanks,
greg k-h
This was discussed already; see https://patchwork.kernel.org/patch/10203819/. It turns out that Al's original commit incidentally fixed symlink decryption for ext4 and f2fs on 32-bit systems, so the backport is wanted for that reason. And pulling in the rest of the commit, while it could be done, would have broken things and required additional follow-on patches. Jin and Greg, it would have been helpful if the discussion had been captured in the commit message, so that people like Ben who are watching the stable commits aren't left wondering.
Eric
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov bp@suse.de
commit a15a753539eca8ba243d576f02e7ca9c4b7d7042 upstream with minor adjustments.
Doing so is completely void of sense for multiple reasons so prevent it. Set dis_ucode_ldr to true and thus disable the microcode loader by default to address xen pv guests which execute the AP path but not the BSP path.
By having it turned off by default, the APs won't run into the loader either.
Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the xen pv one. That one gets the aforementioned "fix".
Also, improve the detection method by caching the final decision whether to continue loading in dis_ucode_ldr and do it once on the BSP. The APs then simply test that value.
Signed-off-by: Borislav Petkov bp@suse.de Tested-by: Juergen Gross jgross@suse.com Tested-by: Boris Ostrovsky boris.ostrovsky@oracle.com Acked-by: Juergen Gross jgross@suse.com Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Rolf Neugebauer rolf.neugebauer@docker.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kernel/cpu/microcode/core.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -44,7 +44,7 @@
static struct microcode_ops *microcode_ops;
-static bool dis_ucode_ldr; +static bool dis_ucode_ldr = true;
static int __init disable_loader(char *str) { @@ -81,6 +81,7 @@ struct cpu_info_ctx {
static bool __init check_loader_disabled_bsp(void) { + u32 a, b, c, d; #ifdef CONFIG_X86_32 const char *cmdline = (const char *)__pa_nodebug(boot_command_line); const char *opt = "dis_ucode_ldr"; @@ -93,8 +94,23 @@ static bool __init check_loader_disabled bool *res = &dis_ucode_ldr; #endif
- if (cmdline_find_option_bool(cmdline, option)) - *res = true; + if (!have_cpuid_p()) + return *res; + + a = 1; + c = 0; + native_cpuid(&a, &b, &c, &d); + + /* + * CPUID(1).ECX[31]: reserved for hypervisor use. This is still not + * completely accurate as xen pv guests don't see that CPUID bit set but + * that's good enough as they don't land on the BSP path anyway. + */ + if (c & BIT(31)) + return *res; + + if (cmdline_find_option_bool(cmdline, option) <= 0) + *res = false;
return *res; } @@ -126,9 +142,6 @@ void __init load_ucode_bsp(void) if (check_loader_disabled_bsp()) return;
- if (!have_cpuid_p()) - return; - vendor = x86_vendor(); family = x86_family();
@@ -162,9 +175,6 @@ void load_ucode_ap(void) if (check_loader_disabled_ap()) return;
- if (!have_cpuid_p()) - return; - vendor = x86_vendor(); family = x86_family();
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov bp@suse.de
commit 1f161f67a272cc4f29f27934dd3f74cb657eb5c4 upstream with adjustments.
On CPUs like AMD's Geode, for example, we shouldn't even try to load microcode because they do not support the modern microcode loading interface.
However, we do the family check *after* the other checks whether the loader has been disabled on the command line or whether we're running in a guest.
So move the family checks first in order to exit early if we're being loaded on an unsupported family.
Reported-and-tested-by: Sven Glodowski glodi1@arcor.de Signed-off-by: Borislav Petkov bp@suse.de Cc: stable@vger.kernel.org # 4.11.. Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Link: http://bugzilla.suse.com/show_bug.cgi?id=1061396 Link: http://lkml.kernel.org/r/20171012112316.977-1-bp@alien8.de Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Rolf Neugebauer rolf.neugebauer@docker.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/kernel/cpu/microcode/core.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-)
--- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -94,9 +94,6 @@ static bool __init check_loader_disabled bool *res = &dis_ucode_ldr; #endif
- if (!have_cpuid_p()) - return *res; - a = 1; c = 0; native_cpuid(&a, &b, &c, &d); @@ -138,8 +135,9 @@ void __init load_ucode_bsp(void) { int vendor; unsigned int family; + bool intel = true;
- if (check_loader_disabled_bsp()) + if (!have_cpuid_p()) return;
vendor = x86_vendor(); @@ -147,16 +145,27 @@ void __init load_ucode_bsp(void)
switch (vendor) { case X86_VENDOR_INTEL: - if (family >= 6) - load_ucode_intel_bsp(); + if (family < 6) + return; break; + case X86_VENDOR_AMD: - if (family >= 0x10) - load_ucode_amd_bsp(family); + if (family < 0x10) + return; + intel = false; break; + default: - break; + return; } + + if (check_loader_disabled_bsp()) + return; + + if (intel) + load_ucode_intel_bsp(); + else + load_ucode_amd_bsp(family); }
static bool check_loader_disabled_ap(void)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Suchanek msuchanek@suse.de
commit 1b689a95ce7427075f9ac9fb4aea1af530742b7f upstream.
Commit 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings") uses u64 in asm/hvcall.h without including linux/types.h
This breaks hvcall.h users that do not include the header themselves.
Fixes: 6e032b350cd1 ("powerpc/powernv: Check device-tree for RFI flush settings") Signed-off-by: Michal Suchanek msuchanek@suse.de Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/include/asm/hvcall.h | 1 + 1 file changed, 1 insertion(+)
--- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -298,6 +298,7 @@ #define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2
#ifndef __ASSEMBLY__ +#include <linux/types.h>
/** * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Wilcox mawilcox@microsoft.com
commit f04a703c3d613845ae3141bfaf223489de8ab3eb upstream.
If cifs_zap_mapping() returned an error, we would return without putting the xid that we got earlier. Restructure cifs_file_strict_mmap() and cifs_file_mmap() to be more similar to each other and have a single point of return that always puts the xid.
Signed-off-by: Matthew Wilcox mawilcox@microsoft.com Signed-off-by: Steve French smfrench@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/cifs/file.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-)
--- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3241,20 +3241,18 @@ static const struct vm_operations_struct
int cifs_file_strict_mmap(struct file *file, struct vm_area_struct *vma) { - int rc, xid; + int xid, rc = 0; struct inode *inode = file_inode(file);
xid = get_xid();
- if (!CIFS_CACHE_READ(CIFS_I(inode))) { + if (!CIFS_CACHE_READ(CIFS_I(inode))) rc = cifs_zap_mapping(inode); - if (rc) - return rc; - } - - rc = generic_file_mmap(file, vma); - if (rc == 0) + if (!rc) + rc = generic_file_mmap(file, vma); + if (!rc) vma->vm_ops = &cifs_file_vm_ops; + free_xid(xid); return rc; } @@ -3264,16 +3262,16 @@ int cifs_file_mmap(struct file *file, st int rc, xid;
xid = get_xid(); + rc = cifs_revalidate_file(file); - if (rc) { + if (rc) cifs_dbg(FYI, "Validation prior to mmap failed, error=%d\n", rc); - free_xid(xid); - return rc; - } - rc = generic_file_mmap(file, vma); - if (rc == 0) + if (!rc) + rc = generic_file_mmap(file, vma); + if (!rc) vma->vm_ops = &cifs_file_vm_ops; + free_xid(xid); return rc; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel N Pettersson danielnp@axis.com
commit 9aca7e454415f7878b28524e76bebe1170911a88 upstream.
Autonegotiation gives a security settings mismatch error if the SMB server selects an SMBv3 dialect that isn't SMB3.02. The exact error is "protocol revalidation - security settings mismatch". This can be tested using Samba v4.2 or by setting the global Samba setting max protocol = SMB3_00.
The check that fails in smb3_validate_negotiate is the dialect verification of the negotiate info response. This is because it tries to verify against the protocol_id in the global smbdefault_values. The protocol_id in smbdefault_values is SMB3.02. In SMB2_negotiate the protocol_id in smbdefault_values isn't updated, it is global so it probably shouldn't be, but server->dialect is.
This patch changes the check in smb3_validate_negotiate to use server->dialect instead of server->vals->protocol_id. The patch works with autonegotiate and when using a specific version in the vers mount option.
Signed-off-by: Daniel N Pettersson danielnp@axis.com Signed-off-by: Steve French smfrench@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/cifs/smb2pdu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -580,8 +580,7 @@ int smb3_validate_negotiate(const unsign }
/* check validate negotiate info response matches what we got earlier */ - if (pneg_rsp->Dialect != - cpu_to_le16(tcon->ses->server->vals->protocol_id)) + if (pneg_rsp->Dialect != cpu_to_le16(tcon->ses->server->dialect)) goto vneg_out;
if (pneg_rsp->SecurityMode != cpu_to_le16(tcon->ses->server->sec_mode))
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aurelien Aptel aaptel@suse.com
commit 97f4b7276b829a8927ac903a119bef2f963ccc58 upstream.
also replaces memset()+kfree() by kzfree().
Signed-off-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Steve French smfrench@gmail.com Reviewed-by: Pavel Shilovsky pshilov@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/cifs/cifsencrypt.c | 3 +-- fs/cifs/connect.c | 6 +++--- fs/cifs/misc.c | 14 ++++---------- 3 files changed, 8 insertions(+), 15 deletions(-)
--- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -306,9 +306,8 @@ int calc_lanman_hash(const char *passwor { int i; int rc; - char password_with_pad[CIFS_ENCPWD_SIZE]; + char password_with_pad[CIFS_ENCPWD_SIZE] = {0};
- memset(password_with_pad, 0, CIFS_ENCPWD_SIZE); if (password) strncpy(password_with_pad, password, CIFS_ENCPWD_SIZE);
--- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1695,7 +1695,7 @@ cifs_parse_mount_options(const char *mou tmp_end++; if (!(tmp_end < end && tmp_end[1] == delim)) { /* No it is not. Set the password to NULL */ - kfree(vol->password); + kzfree(vol->password); vol->password = NULL; break; } @@ -1733,7 +1733,7 @@ cifs_parse_mount_options(const char *mou options = end; }
- kfree(vol->password); + kzfree(vol->password); /* Now build new password string */ temp_len = strlen(value); vol->password = kzalloc(temp_len+1, GFP_KERNEL); @@ -4148,7 +4148,7 @@ cifs_construct_tcon(struct cifs_sb_info reset_cifs_unix_caps(0, tcon, NULL, vol_info); out: kfree(vol_info->username); - kfree(vol_info->password); + kzfree(vol_info->password); kfree(vol_info);
return tcon; --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -99,14 +99,11 @@ sesInfoFree(struct cifs_ses *buf_to_free kfree(buf_to_free->serverOS); kfree(buf_to_free->serverDomain); kfree(buf_to_free->serverNOS); - if (buf_to_free->password) { - memset(buf_to_free->password, 0, strlen(buf_to_free->password)); - kfree(buf_to_free->password); - } + kzfree(buf_to_free->password); kfree(buf_to_free->user_name); kfree(buf_to_free->domainName); - kfree(buf_to_free->auth_key.response); - kfree(buf_to_free); + kzfree(buf_to_free->auth_key.response); + kzfree(buf_to_free); }
struct cifs_tcon * @@ -137,10 +134,7 @@ tconInfoFree(struct cifs_tcon *buf_to_fr } atomic_dec(&tconInfoAllocCount); kfree(buf_to_free->nativeFileSystem); - if (buf_to_free->password) { - memset(buf_to_free->password, 0, strlen(buf_to_free->password)); - kfree(buf_to_free->password); - } + kzfree(buf_to_free->password); kfree(buf_to_free); }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yang Shunyong shunyong.yang@hxt-semitech.com
commit 66b3bd2356e0a1531c71a3dcf96944621e25c17c upstream.
The type of arg passed to dmatest_callback is struct dmatest_done. It refers to test_done in struct dmatest_thread, not done_wait.
Fixes: 6f6a23a213be ("dmaengine: dmatest: move callback wait ...") Signed-off-by: Yang Shunyong shunyong.yang@hxt-semitech.com Acked-by: Adam Wallis awallis@codeaurora.org Signed-off-by: Vinod Koul vinod.koul@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/dma/dmatest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -329,7 +329,7 @@ static void dmatest_callback(void *arg) { struct dmatest_done *done = arg; struct dmatest_thread *thread = - container_of(arg, struct dmatest_thread, done_wait); + container_of(done, struct dmatest_thread, test_done); if (!thread->done) { done->done = true; wake_up_all(done->wait);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman ebiederm@xmission.com
commit dc3ee32e96d74dd6c80eed63af5065cb75899299 upstream.
Florian Weber reported:
Under full load (unshare() in loop -> OOM conditions) we can get kernel panic:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffff81476c85>] nfqnl_nf_hook_drop+0x35/0x70 [..] task: ffff88012dfa3840 ti: ffff88012dffc000 task.ti: ffff88012dffc000 RIP: 0010:[<ffffffff81476c85>] [<ffffffff81476c85>] nfqnl_nf_hook_drop+0x35/0x70 RSP: 0000:ffff88012dfffd80 EFLAGS: 00010206 RAX: 0000000000000008 RBX: ffffffff81add0c0 RCX: ffff88013fd80000 [..] Call Trace: [<ffffffff81474d98>] nf_queue_nf_hook_drop+0x18/0x20 [<ffffffff814738eb>] nf_unregister_net_hook+0xdb/0x150 [<ffffffff8147398f>] netfilter_net_exit+0x2f/0x60 [<ffffffff8141b088>] ops_exit_list.isra.4+0x38/0x60 [<ffffffff8141b652>] setup_net+0xc2/0x120 [<ffffffff8141bd09>] copy_net_ns+0x79/0x120 [<ffffffff8106965b>] create_new_namespaces+0x11b/0x1e0 [<ffffffff810698a7>] unshare_nsproxy_namespaces+0x57/0xa0 [<ffffffff8104baa2>] SyS_unshare+0x1b2/0x340 [<ffffffff81608276>] entry_SYSCALL_64_fastpath+0x1e/0xa8 Code: 65 00 48 89 e5 41 56 41 55 41 54 53 83 e8 01 48 8b 97 70 12 00 00 48 98 49 89 f4 4c 8b 74 c2 18 4d 8d 6e 08 49 81 c6 88 00 00 00 <49> 8b 5d 00 48 85 db 74 1a 48 89 df 4c 89 e2 48 c7 c6 90 68 47
The simple fix for this requires a new pernet variable for struct nf_queue that indicates when it is safe to use the dynamically allocated nf_queue state.
As we need a variable anyway make nf_register_queue_handler and nf_unregister_queue_handler pernet. This allows the existing logic of when it is safe to use the state from the nfnetlink_queue module to be reused with no changes except for making it per net.
The syncrhonize_rcu from nf_unregister_queue_handler is moved to a new function nfnl_queue_net_exit_batch so that the worst case of having a syncrhonize_rcu in the pernet exit path is not experienced in batch mode.
Reported-by: Florian Westphal fw@strlen.de Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Acked-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Cc: Eric Biggers ebiggers3@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- include/net/netfilter/nf_queue.h | 4 ++-- include/net/netns/netfilter.h | 2 ++ net/netfilter/nf_queue.c | 17 ++++++++--------- net/netfilter/nfnetlink_queue.c | 18 ++++++++++++------ 4 files changed, 24 insertions(+), 17 deletions(-)
--- a/include/net/netfilter/nf_queue.h +++ b/include/net/netfilter/nf_queue.h @@ -28,8 +28,8 @@ struct nf_queue_handler { struct nf_hook_ops *ops); };
-void nf_register_queue_handler(const struct nf_queue_handler *qh); -void nf_unregister_queue_handler(void); +void nf_register_queue_handler(struct net *net, const struct nf_queue_handler *qh); +void nf_unregister_queue_handler(struct net *net); void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
void nf_queue_entry_get_refs(struct nf_queue_entry *entry); --- a/include/net/netns/netfilter.h +++ b/include/net/netns/netfilter.h @@ -5,11 +5,13 @@
struct proc_dir_entry; struct nf_logger; +struct nf_queue_handler;
struct netns_nf { #if defined CONFIG_PROC_FS struct proc_dir_entry *proc_netfilter; #endif + const struct nf_queue_handler __rcu *queue_handler; const struct nf_logger __rcu *nf_loggers[NFPROTO_NUMPROTO]; #ifdef CONFIG_SYSCTL struct ctl_table_header *nf_log_dir_header; --- a/net/netfilter/nf_queue.c +++ b/net/netfilter/nf_queue.c @@ -26,23 +26,21 @@ * Once the queue is registered it must reinject all packets it * receives, no matter what. */ -static const struct nf_queue_handler __rcu *queue_handler __read_mostly;
/* return EBUSY when somebody else is registered, return EEXIST if the * same handler is registered, return 0 in case of success. */ -void nf_register_queue_handler(const struct nf_queue_handler *qh) +void nf_register_queue_handler(struct net *net, const struct nf_queue_handler *qh) { /* should never happen, we only have one queueing backend in kernel */ - WARN_ON(rcu_access_pointer(queue_handler)); - rcu_assign_pointer(queue_handler, qh); + WARN_ON(rcu_access_pointer(net->nf.queue_handler)); + rcu_assign_pointer(net->nf.queue_handler, qh); } EXPORT_SYMBOL(nf_register_queue_handler);
/* The caller must flush their queue before this */ -void nf_unregister_queue_handler(void) +void nf_unregister_queue_handler(struct net *net) { - RCU_INIT_POINTER(queue_handler, NULL); - synchronize_rcu(); + RCU_INIT_POINTER(net->nf.queue_handler, NULL); } EXPORT_SYMBOL(nf_unregister_queue_handler);
@@ -103,7 +101,7 @@ void nf_queue_nf_hook_drop(struct net *n const struct nf_queue_handler *qh;
rcu_read_lock(); - qh = rcu_dereference(queue_handler); + qh = rcu_dereference(net->nf.queue_handler); if (qh) qh->nf_hook_drop(net, ops); rcu_read_unlock(); @@ -122,9 +120,10 @@ int nf_queue(struct sk_buff *skb, struct nf_queue_entry *entry = NULL; const struct nf_afinfo *afinfo; const struct nf_queue_handler *qh; + struct net *net = state->net;
/* QUEUE == DROP if no one is waiting, to be safe. */ - qh = rcu_dereference(queue_handler); + qh = rcu_dereference(net->nf.queue_handler); if (!qh) { status = -ESRCH; goto err; --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -1382,21 +1382,29 @@ static int __net_init nfnl_queue_net_ini net->nf.proc_netfilter, &nfqnl_file_ops)) return -ENOMEM; #endif + nf_register_queue_handler(net, &nfqh); return 0; }
static void __net_exit nfnl_queue_net_exit(struct net *net) { + nf_unregister_queue_handler(net); #ifdef CONFIG_PROC_FS remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter); #endif }
+static void nfnl_queue_net_exit_batch(struct list_head *net_exit_list) +{ + synchronize_rcu(); +} + static struct pernet_operations nfnl_queue_net_ops = { - .init = nfnl_queue_net_init, - .exit = nfnl_queue_net_exit, - .id = &nfnl_queue_net_id, - .size = sizeof(struct nfnl_queue_net), + .init = nfnl_queue_net_init, + .exit = nfnl_queue_net_exit, + .exit_batch = nfnl_queue_net_exit_batch, + .id = &nfnl_queue_net_id, + .size = sizeof(struct nfnl_queue_net), };
static int __init nfnetlink_queue_init(void) @@ -1417,7 +1425,6 @@ static int __init nfnetlink_queue_init(v }
register_netdevice_notifier(&nfqnl_dev_notifier); - nf_register_queue_handler(&nfqh); return status;
cleanup_netlink_notifier: @@ -1429,7 +1436,6 @@ out:
static void __exit nfnetlink_queue_fini(void) { - nf_unregister_queue_handler(); unregister_netdevice_notifier(&nfqnl_dev_notifier); nfnetlink_subsys_unregister(&nfqnl_subsys); netlink_unregister_notifier(&nfqnl_rtnl_notifier);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner tglx@linutronix.de
commit cef31d9af908243421258f1df35a4a644604efbe upstream.
timer_create() specifies via sigevent->sigev_notify the signal delivery for the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but it affects show_timer() which handles the output of /proc/$PID/timers. That function uses a string array to pretty print sigev_notify. The access to that array has no bound checks, so random sigev_notify cause access beyond the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID masking from various code pathes as SIGEV_NONE can never be set in combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers ebiggers3@gmail.com Reported-by: Dmitry Vyukov dvyukov@google.com Reported-by: Alexey Dobriyan adobriyan@gmail.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: John Stultz john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/time/posix-timers.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-)
--- a/kernel/time/posix-timers.c +++ b/kernel/time/posix-timers.c @@ -507,17 +507,22 @@ static struct pid *good_sigevent(sigeven { struct task_struct *rtn = current->group_leader;
- if ((event->sigev_notify & SIGEV_THREAD_ID ) && - (!(rtn = find_task_by_vpid(event->sigev_notify_thread_id)) || - !same_thread_group(rtn, current) || - (event->sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_SIGNAL)) + switch (event->sigev_notify) { + case SIGEV_SIGNAL | SIGEV_THREAD_ID: + rtn = find_task_by_vpid(event->sigev_notify_thread_id); + if (!rtn || !same_thread_group(rtn, current)) + return NULL; + /* FALLTHRU */ + case SIGEV_SIGNAL: + case SIGEV_THREAD: + if (event->sigev_signo <= 0 || event->sigev_signo > SIGRTMAX) + return NULL; + /* FALLTHRU */ + case SIGEV_NONE: + return task_pid(rtn); + default: return NULL; - - if (((event->sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) && - ((event->sigev_signo <= 0) || (event->sigev_signo > SIGRTMAX))) - return NULL; - - return task_pid(rtn); + } }
void posix_timers_register_clock(const clockid_t clock_id, @@ -745,8 +750,7 @@ common_timer_get(struct k_itimer *timr, /* interval timer ? */ if (iv.tv64) cur_setting->it_interval = ktime_to_timespec(iv); - else if (!hrtimer_active(timer) && - (timr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) + else if (!hrtimer_active(timer) && timr->it_sigev_notify != SIGEV_NONE) return;
now = timer->base->get_time(); @@ -757,7 +761,7 @@ common_timer_get(struct k_itimer *timr, * expiry is > now. */ if (iv.tv64 && (timr->it_requeue_pending & REQUEUE_PENDING || - (timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) + timr->it_sigev_notify == SIGEV_NONE)) timr->it_overrun += (unsigned int) hrtimer_forward(timer, now, iv);
remaining = __hrtimer_expires_remaining_adjusted(timer, now); @@ -767,7 +771,7 @@ common_timer_get(struct k_itimer *timr, * A single shot SIGEV_NONE timer must return 0, when * it is expired ! */ - if ((timr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) + if (timr->it_sigev_notify != SIGEV_NONE) cur_setting->it_value.tv_nsec = 1; } else cur_setting->it_value = ktime_to_timespec(remaining); @@ -865,7 +869,7 @@ common_timer_set(struct k_itimer *timr, timr->it.real.interval = timespec_to_ktime(new_setting->it_interval);
/* SIGEV_NONE timers are not queued ! See common_timer_get */ - if (((timr->it_sigev_notify & ~SIGEV_THREAD_ID) == SIGEV_NONE)) { + if (timr->it_sigev_notify == SIGEV_NONE) { /* Setup correct expiry time for relative timers */ if (mode == HRTIMER_MODE_REL) { hrtimer_add_expires(timer, timer->base->get_time());
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Petr Cvek petr.cvek@tul.cz
commit c8cd751060b149997b9de53a494fb1490ded72c5 upstream.
Commit 76e0da34c7ce ("usb-gadget/uvc: use per-attribute show and store methods") caused a stringification of an undefined macro argument "aname", so three UVC parameters (streaming_interval, streaming_maxpacket and streaming_maxburst) were named "aname".
Add the definition of "aname" to the main macro and name the filenames as originaly intended.
Signed-off-by: Petr Cvek petr.cvek@tul.cz Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/gadget/function/uvc_configfs.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -2202,7 +2202,7 @@ static struct configfs_item_operations u .release = uvc_attr_release, };
-#define UVCG_OPTS_ATTR(cname, conv, str2u, uxx, vnoc, limit) \ +#define UVCG_OPTS_ATTR(cname, aname, conv, str2u, uxx, vnoc, limit) \ static ssize_t f_uvc_opts_##cname##_show( \ struct config_item *item, char *page) \ { \ @@ -2245,16 +2245,16 @@ end: \ return ret; \ } \ \ -UVC_ATTR(f_uvc_opts_, cname, aname) +UVC_ATTR(f_uvc_opts_, cname, cname)
#define identity_conv(x) (x)
-UVCG_OPTS_ATTR(streaming_interval, identity_conv, kstrtou8, u8, identity_conv, - 16); -UVCG_OPTS_ATTR(streaming_maxpacket, le16_to_cpu, kstrtou16, u16, le16_to_cpu, - 3072); -UVCG_OPTS_ATTR(streaming_maxburst, identity_conv, kstrtou8, u8, identity_conv, - 15); +UVCG_OPTS_ATTR(streaming_interval, streaming_interval, identity_conv, + kstrtou8, u8, identity_conv, 16); +UVCG_OPTS_ATTR(streaming_maxpacket, streaming_maxpacket, le16_to_cpu, + kstrtou16, u16, le16_to_cpu, 3072); +UVCG_OPTS_ATTR(streaming_maxburst, streaming_maxburst, identity_conv, + kstrtou8, u8, identity_conv, 15);
#undef identity_conv
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) rostedt@goodmis.org
commit ad0f1d9d65938aec72a698116cd73a980916895e upstream.
When the rto_push_irq_work_func() is called, it looks at the RT overloaded bitmask in the root domain via the runqueue (rq->rd). The problem is that during CPU up and down, nothing here stops rq->rd from changing between taking the rq->rd->rto_lock and releasing it. That means the lock that is released is not the same lock that was taken.
Instead of using this_rq()->rd to get the root domain, as the irq work is part of the root domain, we can simply get the root domain from the irq work that is passed to the routine:
container_of(work, struct root_domain, rto_push_work)
This keeps the root domain consistent.
Reported-by: Pavan Kondeti pkondeti@codeaurora.org Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Mike Galbraith efault@gmx.de Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: 4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/sched/rt.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
--- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -1833,9 +1833,8 @@ static void push_rt_tasks(struct rq *rq) * the rt_loop_next will cause the iterator to perform another scan. * */ -static int rto_next_cpu(struct rq *rq) +static int rto_next_cpu(struct root_domain *rd) { - struct root_domain *rd = rq->rd; int next; int cpu;
@@ -1911,7 +1910,7 @@ static void tell_cpu_to_push(struct rq * * Otherwise it is finishing up and an ipi needs to be sent. */ if (rq->rd->rto_cpu < 0) - cpu = rto_next_cpu(rq); + cpu = rto_next_cpu(rq->rd);
raw_spin_unlock(&rq->rd->rto_lock);
@@ -1924,6 +1923,8 @@ static void tell_cpu_to_push(struct rq * /* Called from hardirq context */ void rto_push_irq_work_func(struct irq_work *work) { + struct root_domain *rd = + container_of(work, struct root_domain, rto_push_work); struct rq *rq; int cpu;
@@ -1939,18 +1940,18 @@ void rto_push_irq_work_func(struct irq_w raw_spin_unlock(&rq->lock); }
- raw_spin_lock(&rq->rd->rto_lock); + raw_spin_lock(&rd->rto_lock);
/* Pass the IPI to the next rt overloaded queue */ - cpu = rto_next_cpu(rq); + cpu = rto_next_cpu(rd);
- raw_spin_unlock(&rq->rd->rto_lock); + raw_spin_unlock(&rd->rto_lock);
if (cpu < 0) return;
/* Try the next RT overloaded CPU */ - irq_work_queue_on(&rq->rd->rto_push_work, cpu); + irq_work_queue_on(&rd->rto_push_work, cpu); } #endif /* HAVE_RT_PUSH_IPI */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) rostedt@goodmis.org
commit 364f56653708ba8bcdefd4f0da2a42904baa8eeb upstream.
When issuing an IPI RT push, where an IPI is sent to each CPU that has more than one RT task scheduled on it, it references the root domain's rto_mask, that contains all the CPUs within the root domain that has more than one RT task in the runable state. The problem is, after the IPIs are initiated, the rq->lock is released. This means that the root domain that is associated to the run queue could be freed while the IPIs are going around.
Add a sched_get_rd() and a sched_put_rd() that will increment and decrement the root domain's ref count respectively. This way when initiating the IPIs, the scheduler will up the root domain's ref count before releasing the rq->lock, ensuring that the root domain does not go away until the IPI round is complete.
Reported-by: Pavan Kondeti pkondeti@codeaurora.org Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Mike Galbraith efault@gmx.de Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: 4bdced5c9a292 ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/CAEU1=PkiHO35Dzna8EQqNSKW1fr1y1zRQ5y66X117MG06sQtNA... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/sched/core.c | 13 +++++++++++++ kernel/sched/rt.c | 9 +++++++-- kernel/sched/sched.h | 2 ++ 3 files changed, 22 insertions(+), 2 deletions(-)
--- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5896,6 +5896,19 @@ static void rq_attach_root(struct rq *rq call_rcu_sched(&old_rd->rcu, free_rootdomain); }
+void sched_get_rd(struct root_domain *rd) +{ + atomic_inc(&rd->refcount); +} + +void sched_put_rd(struct root_domain *rd) +{ + if (!atomic_dec_and_test(&rd->refcount)) + return; + + call_rcu_sched(&rd->rcu, free_rootdomain); +} + static int init_rootdomain(struct root_domain *rd) { memset(rd, 0, sizeof(*rd)); --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -1916,8 +1916,11 @@ static void tell_cpu_to_push(struct rq *
rto_start_unlock(&rq->rd->rto_loop_start);
- if (cpu >= 0) + if (cpu >= 0) { + /* Make sure the rd does not get freed while pushing */ + sched_get_rd(rq->rd); irq_work_queue_on(&rq->rd->rto_push_work, cpu); + } }
/* Called from hardirq context */ @@ -1947,8 +1950,10 @@ void rto_push_irq_work_func(struct irq_w
raw_spin_unlock(&rd->rto_lock);
- if (cpu < 0) + if (cpu < 0) { + sched_put_rd(rd); return; + }
/* Try the next RT overloaded CPU */ irq_work_queue_on(&rd->rto_push_work, cpu); --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -553,6 +553,8 @@ struct root_domain { };
extern struct root_domain def_root_domain; +extern void sched_get_rd(struct root_domain *rd); +extern void sched_put_rd(struct root_domain *rd);
#ifdef HAVE_RT_PUSH_IPI extern void rto_push_irq_work_func(struct irq_work *work);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mohamed Ghannam simo.ghannam@gmail.com
commit 69c64866ce072dea1d1e59a0d61e0f66c0dffb76 upstream.
Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL.
Signed-off-by: Mohamed Ghannam simo.ghannam@gmail.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- net/dccp/proto.c | 5 +++++ 1 file changed, 5 insertions(+)
--- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -259,6 +259,7 @@ int dccp_disconnect(struct sock *sk, int { struct inet_connection_sock *icsk = inet_csk(sk); struct inet_sock *inet = inet_sk(sk); + struct dccp_sock *dp = dccp_sk(sk); int err = 0; const int old_state = sk->sk_state;
@@ -278,6 +279,10 @@ int dccp_disconnect(struct sock *sk, int sk->sk_err = ECONNRESET;
dccp_clear_xmit_timers(sk); + ccid_hc_rx_delete(dp->dccps_hc_rx_ccid, sk); + ccid_hc_tx_delete(dp->dccps_hc_tx_ccid, sk); + dp->dccps_hc_rx_ccid = NULL; + dp->dccps_hc_tx_ccid = NULL;
__skb_queue_purge(&sk->sk_receive_queue); __skb_queue_purge(&sk->sk_write_queue);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley tvboxspy@gmail.com
commit 3d932ee27e852e4904647f15b64dedca51187ad7 upstream.
Warm start has no check as whether a genuine device has connected and proceeds to next execution path.
Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes.
Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as
Reported-by: Andrey Konovalov andreyknvl@google.com Signed-off-by: Malcolm Priestley tvboxspy@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Cc: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/media/usb/dvb-usb-v2/lmedm04.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -503,18 +503,23 @@ static int lme2510_pid_filter(struct dvb
static int lme2510_return_status(struct dvb_usb_device *d) { - int ret = 0; + int ret; u8 *data;
- data = kzalloc(10, GFP_KERNEL); + data = kzalloc(6, GFP_KERNEL); if (!data) return -ENOMEM;
- ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), - 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200); - info("Firmware Status: %x (%x)", ret , data[2]); + ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + 0x06, 0x80, 0x0302, 0x00, + data, 0x6, 200); + if (ret != 6) + ret = -EINVAL; + else + ret = data[2]; + + info("Firmware Status: %6ph", data);
- ret = (ret < 0) ? -ENODEV : data[2]; kfree(data); return ret; } @@ -1199,6 +1204,7 @@ static int lme2510_get_adapter_count(str static int lme2510_identify_state(struct dvb_usb_device *d, const char **name) { struct lme2510_state *st = d->priv; + int status;
usb_reset_configuration(d->udev);
@@ -1207,12 +1213,16 @@ static int lme2510_identify_state(struct
st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
- if (lme2510_return_status(d) == 0x44) { + status = lme2510_return_status(d); + if (status == 0x44) { *name = lme_firmware_switch(d, 0); return COLD; }
- return 0; + if (status != 0x47) + return -EINVAL; + + return WARM; }
static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Malcolm Priestley tvboxspy@gmail.com
commit 7bf7a7116ed313c601307f7e585419369926ab05 upstream.
When the tuner was split from m88rs2000 the attach function is in wrong place.
Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset.
Prevents driver starting up without any tuner connected.
Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN
Reported-by: Andrey Konovalov andreyknvl@google.com Signed-off-by: Malcolm Priestley tvboxspy@gmail.com Tested-by: Andrey Konovalov andreyknvl@google.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Cc: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/media/usb/dvb-usb-v2/lmedm04.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -1083,8 +1083,6 @@ static int dm04_lme2510_frontend_attach(
if (adap->fe[0]) { info("FE Found M88RS2000"); - dvb_attach(ts2020_attach, adap->fe[0], &ts2020_config, - &d->i2c_adap); st->i2c_tuner_gate_w = 5; st->i2c_tuner_gate_r = 5; st->i2c_tuner_addr = 0x60; @@ -1150,17 +1148,18 @@ static int dm04_lme2510_tuner(struct dvb ret = st->tuner_config; break; case TUNER_RS2000: - ret = st->tuner_config; + if (dvb_attach(ts2020_attach, adap->fe[0], + &ts2020_config, &d->i2c_adap)) + ret = st->tuner_config; break; default: break; }
- if (ret) + if (ret) { info("TUN Found %s tuner", tun_msg[ret]); - else { - info("TUN No tuner found --- resetting device"); - lme_coldreset(d); + } else { + info("TUN No tuner found"); return -ENODEV; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann arnd@arndb.de
commit 9e343e87d2c4c707ef8fae2844864d4dde3a2d13 upstream.
The map_word_() functions, dating back to linux-2.6.8, try to perform bitwise operations on a 'map_word' structure. This may have worked with compilers that were current then (gcc-3.4 or earlier), but end up being rather inefficient on any version I could try now (gcc-4.4 or higher). Specifically we hit a problem analyzed in gcc PR81715 where we fail to reuse the stack space for local variables.
This can be seen immediately in the stack consumption for cfi_staa_erase_varsize() and other functions that (with CONFIG_KASAN) can be up to 2200 bytes. Changing the inline functions into macros brings this down to 1280 bytes. Without KASAN, the same problem exists, but the stack consumption is lower to start with, my patch shrinks it from 920 to 496 bytes on with arm-linux-gnueabi-gcc-5.4, and saves around 1KB in .text size for cfi_cmdset_0020.c, as it avoids copying map_word structures for each call to one of these helpers.
With the latest gcc-8 snapshot, the problem is fixed in upstream gcc, but nobody uses that yet, so we should still work around it in mainline kernels and probably backport the workaround to stable kernels as well. We had a couple of other functions that suffered from the same gcc bug, and all of those had a simpler workaround involving dummy variables in the inline function. Unfortunately that did not work here, the macro hack was the best I could come up with.
It would also be helpful to have someone to a little performance testing on the patch, to see how much it helps in terms of CPU utilitzation.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann arnd@arndb.de Acked-by: Richard Weinberger richard@nod.at Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- include/linux/mtd/map.h | 130 ++++++++++++++++++++++-------------------------- 1 file changed, 61 insertions(+), 69 deletions(-)
--- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -265,75 +265,67 @@ void map_destroy(struct mtd_info *mtd); #define INVALIDATE_CACHED_RANGE(map, from, size) \ do { if (map->inval_cache) map->inval_cache(map, from, size); } while (0)
- -static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2) -{ - int i; - - for (i = 0; i < map_words(map); i++) { - if (val1.x[i] != val2.x[i]) - return 0; - } - - return 1; -} - -static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2) -{ - map_word r; - int i; - - for (i = 0; i < map_words(map); i++) - r.x[i] = val1.x[i] & val2.x[i]; - - return r; -} - -static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2) -{ - map_word r; - int i; - - for (i = 0; i < map_words(map); i++) - r.x[i] = val1.x[i] & ~val2.x[i]; - - return r; -} - -static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2) -{ - map_word r; - int i; - - for (i = 0; i < map_words(map); i++) - r.x[i] = val1.x[i] | val2.x[i]; - - return r; -} - -static inline int map_word_andequal(struct map_info *map, map_word val1, map_word val2, map_word val3) -{ - int i; - - for (i = 0; i < map_words(map); i++) { - if ((val1.x[i] & val2.x[i]) != val3.x[i]) - return 0; - } - - return 1; -} - -static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2) -{ - int i; - - for (i = 0; i < map_words(map); i++) { - if (val1.x[i] & val2.x[i]) - return 1; - } - - return 0; -} +#define map_word_equal(map, val1, val2) \ +({ \ + int i, ret = 1; \ + for (i = 0; i < map_words(map); i++) \ + if ((val1).x[i] != (val2).x[i]) { \ + ret = 0; \ + break; \ + } \ + ret; \ +}) + +#define map_word_and(map, val1, val2) \ +({ \ + map_word r; \ + int i; \ + for (i = 0; i < map_words(map); i++) \ + r.x[i] = (val1).x[i] & (val2).x[i]; \ + r; \ +}) + +#define map_word_clr(map, val1, val2) \ +({ \ + map_word r; \ + int i; \ + for (i = 0; i < map_words(map); i++) \ + r.x[i] = (val1).x[i] & ~(val2).x[i]; \ + r; \ +}) + +#define map_word_or(map, val1, val2) \ +({ \ + map_word r; \ + int i; \ + for (i = 0; i < map_words(map); i++) \ + r.x[i] = (val1).x[i] | (val2).x[i]; \ + r; \ +}) + +#define map_word_andequal(map, val1, val2, val3) \ +({ \ + int i, ret = 1; \ + for (i = 0; i < map_words(map); i++) { \ + if (((val1).x[i] & (val2).x[i]) != (val2).x[i]) { \ + ret = 0; \ + break; \ + } \ + } \ + ret; \ +}) + +#define map_word_bitsset(map, val1, val2) \ +({ \ + int i, ret = 0; \ + for (i = 0; i < map_words(map); i++) { \ + if ((val1).x[i] & (val2).x[i]) { \ + ret = 1; \ + break; \ + } \ + } \ + ret; \ +})
static inline map_word map_word_load(struct map_info *map, const void *ptr) {
On Thu, 2018-02-15 at 16:16 +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
From: Arnd Bergmann arnd@arndb.de
commit 9e343e87d2c4c707ef8fae2844864d4dde3a2d13 upstream.
[...]
-static inline int map_word_andequal(struct map_info *map, map_word val1, map_word val2, map_word val3) -{
- int i;
- for (i = 0; i < map_words(map); i++) {
if ((val1.x[i] & val2.x[i]) != val3.x[i])
return 0;
- }
- return 1;
-}
[...]
+#define map_word_andequal(map, val1, val2, val3) \ +({ \
- int i, ret = 1; \
- for (i = 0; i < map_words(map); i++) { \
if (((val1).x[i] & (val2).x[i]) != (val2).x[i]) { \
[...]
The right-hand side of this comparison is now using val2 instead of val3. (This bug seems to be unfixed upstream.)
Ben.
On Mon, 05 Mar 2018 02:22:52 +0000 Ben Hutchings ben.hutchings@codethink.co.uk wrote:
On Thu, 2018-02-15 at 16:16 +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
From: Arnd Bergmann arnd@arndb.de
commit 9e343e87d2c4c707ef8fae2844864d4dde3a2d13 upstream.
[...]
-static inline int map_word_andequal(struct map_info *map, map_word val1, map_word val2, map_word val3) -{
- int i;
- for (i = 0; i < map_words(map); i++) {
if ((val1.x[i] & val2.x[i]) != val3.x[i])
return 0;
- }
- return 1;
-}
[...]
+#define map_word_andequal(map, val1, val2, val3) \ +({ \
- int i, ret = 1; \
- for (i = 0; i < map_words(map); i++) { \
if (((val1).x[i] & (val2).x[i]) != (val2).x[i]) { \
[...]
The right-hand side of this comparison is now using val2 instead of val3. (This bug seems to be unfixed upstream.)
Indeed. This being said, it's not buggy since all users of map_word_andequal() pass the same value to val2 and val3.
Maybe we should just patch the macro and all call-sites to remove val3.
Ben.
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kamal Dasu kdasu.kdev@gmail.com
commit f953f0f89663c39f08f4baaa8a4a881401b65654 upstream.
Brcm nand controller prefetch feature needs to be disabled by default. Enabling affects performance on random reads as well as dma reads.
Signed-off-by: Kamal Dasu kdasu.kdev@gmail.com Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mtd/nand/brcmnand/brcmnand.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
--- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -1922,16 +1922,9 @@ static int brcmnand_setup_dev(struct brc tmp &= ~ACC_CONTROL_PARTIAL_PAGE; tmp &= ~ACC_CONTROL_RD_ERASED; tmp &= ~ACC_CONTROL_FAST_PGM_RDIN; - if (ctrl->features & BRCMNAND_HAS_PREFETCH) { - /* - * FIXME: Flash DMA + prefetch may see spurious erased-page ECC - * errors - */ - if (has_flash_dma(ctrl)) - tmp &= ~ACC_CONTROL_PREFETCH; - else - tmp |= ACC_CONTROL_PREFETCH; - } + if (ctrl->features & BRCMNAND_HAS_PREFETCH) + tmp &= ~ACC_CONTROL_PREFETCH; + nand_writereg(ctrl, offs, tmp);
return 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miquel Raynal miquel.raynal@free-electrons.com
commit 87e89ce8d0d14f573c068c61bec2117751fb5103 upstream.
Starting from commit 041e4575f034 ("mtd: nand: handle ECC errors in OOB"), nand_do_read_oob() (from the NAND core) did return 0 or a negative error, and the MTD layer expected it.
However, the trend for the NAND layer is now to return an error or a positive number of bitflips. Deciding which status to return to the user belongs to the MTD layer.
Commit e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()") brought this logic to the mtd_read_oob() function while the return value coming from nand_do_read_oob() (called by the ->_read_oob() hook) was left unchanged.
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()") Signed-off-by: Miquel Raynal miquel.raynal@free-electrons.com Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mtd/nand/nand_base.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2023,6 +2023,7 @@ static int nand_write_oob_syndrome(struc static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) { + unsigned int max_bitflips = 0; int page, realpage, chipnr; struct nand_chip *chip = mtd->priv; struct mtd_ecc_stats stats; @@ -2083,6 +2084,8 @@ static int nand_do_read_oob(struct mtd_i nand_wait_ready(mtd); }
+ max_bitflips = max_t(unsigned int, max_bitflips, ret); + readlen -= len; if (!readlen) break; @@ -2108,7 +2111,7 @@ static int nand_do_read_oob(struct mtd_i if (mtd->ecc_stats.failed - stats.failed) return -EBADMSG;
- return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0; + return max_bitflips; }
/**
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miquel Raynal miquel.raynal@free-electrons.com
commit f4c6cd1a7f2275d5bc0e494b21fff26f8dde80f0 upstream.
When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'.
For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine.
Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") Suggested-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Miquel Raynal miquel.raynal@free-electrons.com Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mtd/nand/sunxi_nand.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1046,8 +1046,14 @@ static int sunxi_nand_hw_common_ecc_ctrl
/* Add ECC info retrieval from DT */ for (i = 0; i < ARRAY_SIZE(strengths); i++) { - if (ecc->strength <= strengths[i]) + if (ecc->strength <= strengths[i]) { + /* + * Update ecc->strength value with the actual strength + * that will be used by the ECC engine. + */ + ecc->strength = strengths[i]; break; + } }
if (i >= ARRAY_SIZE(strengths)) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bradley Bolen bradleybolen@gmail.com
commit 7f29ae9f977bcdc3654e68bc36d170223c52fd48 upstream.
This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings.
WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2'
WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory
WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2'
However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs.
kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34)
Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique.
Fixes: 2bf50d42f3a4 ("UBI: block: Dynamically allocate minor numbers") Signed-off-by: Bradley Bolen bradleybolen@gmail.com Reviewed-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-)
--- a/drivers/mtd/ubi/block.c +++ b/drivers/mtd/ubi/block.c @@ -99,6 +99,8 @@ struct ubiblock {
/* Linked list of all ubiblock instances */ static LIST_HEAD(ubiblock_devices); +static DEFINE_IDR(ubiblock_minor_idr); +/* Protects ubiblock_devices and ubiblock_minor_idr */ static DEFINE_MUTEX(devices_mutex); static int ubiblock_major;
@@ -354,8 +356,6 @@ static struct blk_mq_ops ubiblock_mq_ops .map_queue = blk_mq_map_queue, };
-static DEFINE_IDR(ubiblock_minor_idr); - int ubiblock_create(struct ubi_volume_info *vi) { struct ubiblock *dev; @@ -368,14 +368,15 @@ int ubiblock_create(struct ubi_volume_in /* Check that the volume isn't already handled */ mutex_lock(&devices_mutex); if (find_dev_nolock(vi->ubi_num, vi->vol_id)) { - mutex_unlock(&devices_mutex); - return -EEXIST; + ret = -EEXIST; + goto out_unlock; } - mutex_unlock(&devices_mutex);
dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL); - if (!dev) - return -ENOMEM; + if (!dev) { + ret = -ENOMEM; + goto out_unlock; + }
mutex_init(&dev->dev_mutex);
@@ -440,14 +441,13 @@ int ubiblock_create(struct ubi_volume_in goto out_free_queue; }
- mutex_lock(&devices_mutex); list_add_tail(&dev->list, &ubiblock_devices); - mutex_unlock(&devices_mutex);
/* Must be the last step: anyone can call file ops from now on */ add_disk(dev->gd); dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)", dev->ubi_num, dev->vol_id, vi->name); + mutex_unlock(&devices_mutex); return 0;
out_free_queue: @@ -460,6 +460,8 @@ out_put_disk: put_disk(dev->gd); out_free_dev: kfree(dev); +out_unlock: + mutex_unlock(&devices_mutex);
return ret; } @@ -481,30 +483,36 @@ static void ubiblock_cleanup(struct ubib int ubiblock_remove(struct ubi_volume_info *vi) { struct ubiblock *dev; + int ret;
mutex_lock(&devices_mutex); dev = find_dev_nolock(vi->ubi_num, vi->vol_id); if (!dev) { - mutex_unlock(&devices_mutex); - return -ENODEV; + ret = -ENODEV; + goto out_unlock; }
/* Found a device, let's lock it so we can check if it's busy */ mutex_lock(&dev->dev_mutex); if (dev->refcnt > 0) { - mutex_unlock(&dev->dev_mutex); - mutex_unlock(&devices_mutex); - return -EBUSY; + ret = -EBUSY; + goto out_unlock_dev; }
/* Remove from device list */ list_del(&dev->list); - mutex_unlock(&devices_mutex); - ubiblock_cleanup(dev); mutex_unlock(&dev->dev_mutex); + mutex_unlock(&devices_mutex); + kfree(dev); return 0; + +out_unlock_dev: + mutex_unlock(&dev->dev_mutex); +out_unlock: + mutex_unlock(&devices_mutex); + return ret; }
static int ubiblock_resize(struct ubi_volume_info *vi) @@ -633,6 +641,7 @@ static void ubiblock_remove_all(void) struct ubiblock *next; struct ubiblock *dev;
+ mutex_lock(&devices_mutex); list_for_each_entry_safe(dev, next, &ubiblock_devices, list) { /* The module is being forcefully removed */ WARN_ON(dev->desc); @@ -641,6 +650,7 @@ static void ubiblock_remove_all(void) ubiblock_cleanup(dev); kfree(dev); } + mutex_unlock(&devices_mutex); }
int __init ubiblock_init(void)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Scott Mayhew smayhew@redhat.com
commit ba4a76f703ab7eb72941fdaac848502073d6e9ee upstream.
Currently when falling back to doing I/O through the MDS (via pnfs_{read|write}_through_mds), the client frees the nfs_pgio_header without releasing the reference taken on the dreq via pnfs_generic_pg_{read|write}pages -> nfs_pgheader_init -> nfs_direct_pgio_init. It then takes another reference on the dreq via nfs_generic_pg_pgios -> nfs_pgheader_init -> nfs_direct_pgio_init and as a result the requester will become stuck in inode_dio_wait. Once that happens, other processes accessing the inode will become stuck as well.
Ensure that pnfs_read_through_mds() and pnfs_write_through_mds() clean up correctly by calling hdr->completion_ops->completion() instead of calling hdr->release() directly.
This can be reproduced (sometimes) by performing "storage failover takeover" commands on NetApp filer while doing direct I/O from a client.
This can also be reproduced using SystemTap to simulate a failure while doing direct I/O from a client (from Dave Wysochanski dwysocha@redhat.com):
stap -v -g -e 'probe module("nfs_layout_nfsv41_files").function("nfs4_fl_prepare_ds").return { $return=NULL; exit(); }'
Suggested-by: Trond Myklebust trond.myklebust@primarydata.com Signed-off-by: Scott Mayhew smayhew@redhat.com Fixes: 1ca018d28d ("pNFS: Fix a memory leak when attempted pnfs fails") Signed-off-by: Trond Myklebust trond.myklebust@primarydata.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/nfs/pnfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1943,7 +1943,7 @@ pnfs_write_through_mds(struct nfs_pageio nfs_pageio_reset_write_mds(desc); mirror->pg_recoalesce = 1; } - hdr->release(hdr); + hdr->completion_ops->completion(hdr); }
static enum pnfs_try_status @@ -2058,7 +2058,7 @@ pnfs_read_through_mds(struct nfs_pageio_ nfs_pageio_reset_read_mds(desc); mirror->pg_recoalesce = 1; } - hdr->release(hdr); + hdr->completion_ops->completion(hdr); }
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust trond.myklebust@primarydata.com
commit 7f1bda447c9bd48b415acedba6b830f61591601f upstream.
The commit list can get very large, and so we need a cond_resched() in nfs_commit_release_pages() in order to ensure we don't hog the CPU for excessive periods of time.
Reported-by: Mike Galbraith efault@gmx.de Signed-off-by: Trond Myklebust trond.myklebust@primarydata.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/nfs/write.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1746,6 +1746,8 @@ static void nfs_commit_release_pages(str set_bit(NFS_CONTEXT_RESEND_WRITES, &req->wb_context->flags); next: nfs_unlock_and_release_request(req); + /* Latency breaker */ + cond_resched(); } nfss = NFS_SERVER(data->inode); if (atomic_long_read(&nfss->writeback) < NFS_CONGESTION_OFF_THRESH)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: J. Bruce Fields bfields@redhat.com
commit 1b8d97b0a837beaf48a8449955b52c650a7114b4 upstream.
If some of the WRITE calls making up an O_DIRECT write syscall fail, we neglect to commit, even if some of the WRITEs succeed.
We also depend on the commit code to free the reference count on the nfs_page taken in the "if (request_commit)" case at the end of nfs_direct_write_completion(). The problem was originally noticed because ENOSPC's encountered partway through a write would result in a closed file being sillyrenamed when it should have been unlinked.
Signed-off-by: J. Bruce Fields bfields@redhat.com Signed-off-by: Trond Myklebust trond.myklebust@primarydata.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/nfs/direct.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
--- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -787,10 +787,8 @@ static void nfs_direct_write_completion(
spin_lock(&dreq->lock);
- if (test_bit(NFS_IOHDR_ERROR, &hdr->flags)) { - dreq->flags = 0; + if (test_bit(NFS_IOHDR_ERROR, &hdr->flags)) dreq->error = hdr->error; - } if (dreq->error == 0) { nfs_direct_good_bytes(dreq, hdr); if (nfs_write_need_commit(hdr)) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers ebiggers@google.com
commit 49686cbbb3ebafe42e63868222f269d8053ead00 upstream.
nfs_idmap_legacy_upcall() is supposed to be called with 'aux' pointing to a 'struct idmap', via the call to request_key_with_auxdata() in nfs_idmap_request_key().
However it can also be reached via the request_key() system call in which case 'aux' will be NULL, causing a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall(), assuming that the key description is valid enough to get that far.
Fix this by making nfs_idmap_legacy_upcall() negate the key if no auxdata is provided.
As usual, this bug was found by syzkaller. A simple reproducer using the command-line keyctl program is:
keyctl request2 id_legacy uid:0 '' @s
Fixes: 57e62324e469 ("NFS: Store the legacy idmapper result in the keyring") Reported-by: syzbot+5dfdbcf7b3eb5912abbb@syzkaller.appspotmail.com Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Trond Myklebust trondmy@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/nfs/nfs4idmap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/fs/nfs/nfs4idmap.c +++ b/fs/nfs/nfs4idmap.c @@ -567,9 +567,13 @@ static int nfs_idmap_legacy_upcall(struc struct idmap_msg *im; struct idmap *idmap = (struct idmap *)aux; struct key *key = cons->key; - int ret = -ENOMEM; + int ret = -ENOKEY; + + if (!aux) + goto out1;
/* msg and im are freed in idmap_pipe_destroy_msg */ + ret = -ENOMEM; data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) goto out1;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Vecera ivecera@redhat.com
commit ba87977a49913129962af8ac35b0e13e0fa4382d upstream.
Commit b7ce40cff0b9 ("kernfs: cache atomic_write_len in kernfs_open_file") changes type of local variable 'len' from ssize_t to size_t. This change caused that the *ppos value is updated also when the previous write callback failed.
Mentioned snippet: ... len = ops->write(...); <- return value can be negative ... if (len > 0) <- true here in this case *ppos += len; ...
Fixes: b7ce40cff0b9 ("kernfs: cache atomic_write_len in kernfs_open_file") Acked-by: Tejun Heo tj@kernel.org Signed-off-by: Ivan Vecera ivecera@redhat.com Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/kernfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/kernfs/file.c +++ b/fs/kernfs/file.c @@ -272,7 +272,7 @@ static ssize_t kernfs_fop_write(struct f { struct kernfs_open_file *of = kernfs_of(file); const struct kernfs_ops *ops; - size_t len; + ssize_t len; char *buf;
if (of->atomic_write_len) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit ca1b4974bd237f2373b0e980b11957aac3499b56 upstream.
Intel uses different SATA PCI ids for the Desktop and Mobile SKUs of their chipsets. For older models the comment describing which chipset the PCI id is for, aksi indicates when we're dealing with a mobile SKU. Extend the comments for recent chipsets to also indicate mobile SKUs.
The information this commit adds comes from Intel's chipset datasheets.
This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/ata/ahci.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
--- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -260,9 +260,9 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ - { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */ + { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH M AHCI */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ - { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH M RAID */ { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ { PCI_VDEVICE(INTEL, 0x19b0), board_ahci }, /* DNV AHCI */ { PCI_VDEVICE(INTEL, 0x19b1), board_ahci }, /* DNV AHCI */ @@ -285,9 +285,9 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(INTEL, 0x19cE), board_ahci }, /* DNV AHCI */ { PCI_VDEVICE(INTEL, 0x19cF), board_ahci }, /* DNV AHCI */ { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */ - { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */ + { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT M AHCI */ { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */ - { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */ + { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT M RAID */ { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */ { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */ { PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */ @@ -296,20 +296,20 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */ { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */ { PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */ - { PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */ + { PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point M AHCI */ { PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */ { PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */ { PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */ - { PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */ + { PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point M RAID */ { PCI_VDEVICE(INTEL, 0x1e0e), board_ahci }, /* Panther Point RAID */ { PCI_VDEVICE(INTEL, 0x8c02), board_ahci }, /* Lynx Point AHCI */ - { PCI_VDEVICE(INTEL, 0x8c03), board_ahci }, /* Lynx Point AHCI */ + { PCI_VDEVICE(INTEL, 0x8c03), board_ahci }, /* Lynx Point M AHCI */ { PCI_VDEVICE(INTEL, 0x8c04), board_ahci }, /* Lynx Point RAID */ - { PCI_VDEVICE(INTEL, 0x8c05), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c05), board_ahci }, /* Lynx Point M RAID */ { PCI_VDEVICE(INTEL, 0x8c06), board_ahci }, /* Lynx Point RAID */ - { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point M RAID */ { PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */ - { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point M RAID */ { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */ { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */ { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */ @@ -350,21 +350,21 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */ { PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */ { PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */ - { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */ + { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series M AHCI */ { PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */ - { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series M RAID */ { PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */ - { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series M RAID */ { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */ - { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series M RAID */ { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */ { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */ { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */ { PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */ - { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */ + { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H M AHCI */ { PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */ - { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H M RAID */ { PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Lewisburg AHCI*/
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit 998008b779e424bd7513c434d0ab9c1268459009 upstream.
Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI SATA controllers. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/ata/ahci.c | 4 ++++ 1 file changed, 4 insertions(+)
--- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -382,6 +382,10 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0x0f22), board_ahci }, /* Bay Trail AHCI */ + { PCI_VDEVICE(INTEL, 0x0f23), board_ahci }, /* Bay Trail AHCI */ + { PCI_VDEVICE(INTEL, 0x22a3), board_ahci }, /* Cherry Trail AHCI */ + { PCI_VDEVICE(INTEL, 0x5ae3), board_ahci }, /* Apollo Lake AHCI */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg mika.westerberg@linux.intel.com
commit f919dde0772a894c693a1eeabc77df69d6a9b937 upstream.
Add Intel Cannon Lake PCH-H PCI ID to the list of supported controllers.
Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+)
--- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -382,6 +382,7 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */ { PCI_VDEVICE(INTEL, 0x0f22), board_ahci }, /* Bay Trail AHCI */ { PCI_VDEVICE(INTEL, 0x0f23), board_ahci }, /* Bay Trail AHCI */ { PCI_VDEVICE(INTEL, 0x22a3), board_ahci }, /* Cherry Trail AHCI */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers ebiggers@google.com
commit cd6ed77ad5d223dc6299fb58f62e0f5267f7e2ba upstream.
Templates that use an shash spawn can use crypto_shash_alg_has_setkey() to determine whether the underlying algorithm requires a key or not. But there was no corresponding function for ahash spawns. Add it.
Note that the new function actually has to support both shash and ahash algorithms, since the ahash API can be used with either.
Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- crypto/ahash.c | 11 +++++++++++ include/crypto/internal/hash.h | 2 ++ 2 files changed, 13 insertions(+)
--- a/crypto/ahash.c +++ b/crypto/ahash.c @@ -637,5 +637,16 @@ struct hash_alg_common *ahash_attr_alg(s } EXPORT_SYMBOL_GPL(ahash_attr_alg);
+bool crypto_hash_alg_has_setkey(struct hash_alg_common *halg) +{ + struct crypto_alg *alg = &halg->base; + + if (alg->cra_type != &crypto_ahash_type) + return crypto_shash_alg_has_setkey(__crypto_shash_alg(alg)); + + return __crypto_ahash_alg(alg)->setkey != NULL; +} +EXPORT_SYMBOL_GPL(crypto_hash_alg_has_setkey); + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Asynchronous cryptographic hash type"); --- a/include/crypto/internal/hash.h +++ b/include/crypto/internal/hash.h @@ -91,6 +91,8 @@ static inline bool crypto_shash_alg_has_ return alg->setkey != shash_no_setkey; }
+bool crypto_hash_alg_has_setkey(struct hash_alg_common *halg); + int crypto_init_ahash_spawn(struct crypto_ahash_spawn *spawn, struct hash_alg_common *alg, struct crypto_instance *inst);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers ebiggers@google.com
commit 841a3ff329713f796a63356fef6e2f72e4a3f6a3 upstream.
When the cryptd template is used to wrap an unkeyed hash algorithm, don't install a ->setkey() method to the cryptd instance. This change is necessary for cryptd to keep working with unkeyed hash algorithms once we start enforcing that ->setkey() is called when present.
Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- crypto/cryptd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/crypto/cryptd.c +++ b/crypto/cryptd.c @@ -654,7 +654,8 @@ static int cryptd_create_hash(struct cry inst->alg.finup = cryptd_hash_finup_enqueue; inst->alg.export = cryptd_hash_export; inst->alg.import = cryptd_hash_import; - inst->alg.setkey = cryptd_hash_setkey; + if (crypto_shash_alg_has_setkey(salg)) + inst->alg.setkey = cryptd_hash_setkey; inst->alg.digest = cryptd_hash_digest_enqueue;
err = ahash_register_instance(tmpl, inst);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers ebiggers@google.com
commit a16e772e664b9a261424107784804cffc8894977 upstream.
Since Poly1305 requires a nonce per invocation, the Linux kernel implementations of Poly1305 don't use the crypto API's keying mechanism and instead expect the key and nonce as the first 32 bytes of the data. But ->setkey() is still defined as a stub returning an error code. This prevents Poly1305 from being used through AF_ALG and will also break it completely once we start enforcing that all crypto API users (not just AF_ALG) call ->setkey() if present.
Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL.
Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/x86/crypto/poly1305_glue.c | 1 - crypto/poly1305_generic.c | 17 +++++------------ include/crypto/poly1305.h | 2 -- 3 files changed, 5 insertions(+), 15 deletions(-)
--- a/arch/x86/crypto/poly1305_glue.c +++ b/arch/x86/crypto/poly1305_glue.c @@ -164,7 +164,6 @@ static struct shash_alg alg = { .init = poly1305_simd_init, .update = poly1305_simd_update, .final = crypto_poly1305_final, - .setkey = crypto_poly1305_setkey, .descsize = sizeof(struct poly1305_simd_desc_ctx), .base = { .cra_name = "poly1305", --- a/crypto/poly1305_generic.c +++ b/crypto/poly1305_generic.c @@ -51,17 +51,6 @@ int crypto_poly1305_init(struct shash_de } EXPORT_SYMBOL_GPL(crypto_poly1305_init);
-int crypto_poly1305_setkey(struct crypto_shash *tfm, - const u8 *key, unsigned int keylen) -{ - /* Poly1305 requires a unique key for each tag, which implies that - * we can't set it on the tfm that gets accessed by multiple users - * simultaneously. Instead we expect the key as the first 32 bytes in - * the update() call. */ - return -ENOTSUPP; -} -EXPORT_SYMBOL_GPL(crypto_poly1305_setkey); - static void poly1305_setrkey(struct poly1305_desc_ctx *dctx, const u8 *key) { /* r &= 0xffffffc0ffffffc0ffffffc0fffffff */ @@ -80,6 +69,11 @@ static void poly1305_setskey(struct poly dctx->s[3] = le32_to_cpuvp(key + 12); }
+/* + * Poly1305 requires a unique key for each tag, which implies that we can't set + * it on the tfm that gets accessed by multiple users simultaneously. Instead we + * expect the key as the first 32 bytes in the update() call. + */ unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx, const u8 *src, unsigned int srclen) { @@ -285,7 +279,6 @@ static struct shash_alg poly1305_alg = { .init = crypto_poly1305_init, .update = crypto_poly1305_update, .final = crypto_poly1305_final, - .setkey = crypto_poly1305_setkey, .descsize = sizeof(struct poly1305_desc_ctx), .base = { .cra_name = "poly1305", --- a/include/crypto/poly1305.h +++ b/include/crypto/poly1305.h @@ -30,8 +30,6 @@ struct poly1305_desc_ctx { };
int crypto_poly1305_init(struct shash_desc *desc); -int crypto_poly1305_setkey(struct crypto_shash *tfm, - const u8 *key, unsigned int keylen); unsigned int crypto_poly1305_setdesckey(struct poly1305_desc_ctx *dctx, const u8 *src, unsigned int srclen); int crypto_poly1305_update(struct shash_desc *desc,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang xiyou.wangcong@gmail.com
commit 073c516ff73557a8f7315066856c04b50383ac34 upstream.
Andrey reported a use-after-free in __ns_get_path():
spin_lock include/linux/spinlock.h:299 [inline] lockref_get_not_dead+0x19/0x80 lib/lockref.c:179 __ns_get_path+0x197/0x860 fs/nsfs.c:66 open_related_ns+0xda/0x200 fs/nsfs.c:143 sock_ioctl+0x39d/0x440 net/socket.c:1001 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
We are under rcu read lock protection at that point:
rcu_read_lock(); d = atomic_long_read(&ns->stashed); if (!d) goto slow; dentry = (struct dentry *)d; if (!lockref_get_not_dead(&dentry->d_lockref)) goto slow; rcu_read_unlock();
but don't use a proper RCU API on the free path, therefore a parallel __d_free() could free it at the same time. We need to mark the stashed dentry with DCACHE_RCUACCESS so that __d_free() will be called after all readers leave RCU.
Fixes: e149ed2b805f ("take the targets of /proc/*/ns/* symlinks to separate fs") Cc: Alexander Viro viro@zeniv.linux.org.uk Cc: Andrew Morton akpm@linux-foundation.org Reported-by: Andrey Konovalov andreyknvl@google.com Signed-off-by: Cong Wang xiyou.wangcong@gmail.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Cc: Eric Biggers ebiggers3@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/nsfs.c | 1 + 1 file changed, 1 insertion(+)
--- a/fs/nsfs.c +++ b/fs/nsfs.c @@ -95,6 +95,7 @@ slow: return ERR_PTR(-ENOMEM); } d_instantiate(dentry, inode); + dentry->d_flags |= DCACHE_RCUACCESS; dentry->d_fsdata = (void *)ns_ops; d = atomic_long_cmpxchg(&ns->stashed, 0, (unsigned long)dentry); if (d) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit 181a4a2d5a0a7b43cab08a70710d727e7764ccdd upstream.
If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-ioctl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -2783,8 +2783,11 @@ video_usercopy(struct file *file, unsign
/* Handles IOCTL */ err = func(file, cmd, parg); - if (err == -ENOIOCTLCMD) + if (err == -ENOTTY || err == -ENOIOCTLCMD) { err = -ENOTTY; + goto out; + } + if (err == 0) { if (cmd == VIDIOC_DQBUF) trace_v4l2_dqbuf(video_devdata(file)->minor, parg);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ricardo Ribalda ricardo.ribalda@gmail.com
commit 3171cc2b4eb9831ab4df1d80d0410a945b8bc84e upstream.
According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF:
V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared ...
Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This can be tested with vivid and dev_debug:
[257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3, type=vid-cap, flags=0x00002004, field=none, sequence=163, memory=userptr, bytesused=460800, offset/userptr=0x344b000, length=460800
This patch forces FLAG_DONE to 0 after calling DQBUF.
Reported-by: Dimitrios Katsaros patcherwork@gmail.com Signed-off-by: Ricardo Ribalda Delgado ricardo.ribalda@gmail.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/videobuf2-v4l2.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/media/v4l2-core/videobuf2-v4l2.c +++ b/drivers/media/v4l2-core/videobuf2-v4l2.c @@ -593,6 +593,12 @@ static int vb2_internal_dqbuf(struct vb2 b->flags & V4L2_BUF_FLAG_LAST) q->last_buffer_dequeued = true;
+ /* + * After calling the VIDIOC_DQBUF V4L2_BUF_FLAG_DONE must be + * cleared. + */ + b->flags &= ~V4L2_BUF_FLAG_DONE; + return ret; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit 3ee6d040719ae09110e5cdf24d5386abe5d1b776 upstream.
The result of the VIDIOC_PREPARE_BUF ioctl was never copied back to userspace since it was missing in the switch.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 1 + 1 file changed, 1 insertion(+)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -1022,6 +1022,7 @@ static long do_video_ioctl(struct file * err = put_v4l2_create32(&karg.v2crt, up); break;
+ case VIDIOC_PREPARE_BUF: case VIDIOC_QUERYBUF: case VIDIOC_QBUF: case VIDIOC_DQBUF:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit b7b957d429f601d6d1942122b339474f31191d75 upstream.
The indentation of this source is all over the place. Fix this. This patch only changes whitespace.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 208 +++++++++++++------------- 1 file changed, 104 insertions(+), 104 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -48,11 +48,11 @@ struct v4l2_window32 { static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) || - copy_from_user(&kp->w, &up->w, sizeof(up->w)) || - get_user(kp->field, &up->field) || - get_user(kp->chromakey, &up->chromakey) || - get_user(kp->clipcount, &up->clipcount)) - return -EFAULT; + copy_from_user(&kp->w, &up->w, sizeof(up->w)) || + get_user(kp->field, &up->field) || + get_user(kp->chromakey, &up->chromakey) || + get_user(kp->clipcount, &up->clipcount)) + return -EFAULT; if (kp->clipcount > 2048) return -EINVAL; if (kp->clipcount) { @@ -82,10 +82,10 @@ static int get_v4l2_window32(struct v4l2 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || - put_user(kp->field, &up->field) || - put_user(kp->chromakey, &up->chromakey) || - put_user(kp->clipcount, &up->clipcount)) - return -EFAULT; + put_user(kp->field, &up->field) || + put_user(kp->chromakey, &up->chromakey) || + put_user(kp->clipcount, &up->clipcount)) + return -EFAULT; return 0; }
@@ -97,7 +97,7 @@ static inline int get_v4l2_pix_format(st }
static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, - struct v4l2_pix_format_mplane __user *up) + struct v4l2_pix_format_mplane __user *up) { if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane))) return -EFAULT; @@ -112,7 +112,7 @@ static inline int put_v4l2_pix_format(st }
static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, - struct v4l2_pix_format_mplane __user *up) + struct v4l2_pix_format_mplane __user *up) { if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane))) return -EFAULT; @@ -218,7 +218,7 @@ static int __get_v4l2_format32(struct v4 return get_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr); default: pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); + kp->type); return -EINVAL; } } @@ -265,7 +265,7 @@ static int __put_v4l2_format32(struct v4 return put_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr); default: pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); + kp->type); return -EINVAL; } } @@ -299,7 +299,7 @@ static int get_v4l2_standard32(struct v4 { /* other fields are not set by the user, nor used by the driver */ if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) || - get_user(kp->index, &up->index)) + get_user(kp->index, &up->index)) return -EFAULT; return 0; } @@ -307,13 +307,13 @@ static int get_v4l2_standard32(struct v4 static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) || - put_user(kp->index, &up->index) || - put_user(kp->id, &up->id) || - copy_to_user(up->name, kp->name, 24) || - copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || - put_user(kp->framelines, &up->framelines) || - copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32))) - return -EFAULT; + put_user(kp->index, &up->index) || + put_user(kp->id, &up->id) || + copy_to_user(up->name, kp->name, 24) || + copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || + put_user(kp->framelines, &up->framelines) || + copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32))) + return -EFAULT; return 0; }
@@ -353,14 +353,14 @@ struct v4l2_buffer32 { };
static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, - enum v4l2_memory memory) + enum v4l2_memory memory) { void __user *up_pln; compat_long_t p;
if (copy_in_user(up, up32, 2 * sizeof(__u32)) || - copy_in_user(&up->data_offset, &up32->data_offset, - sizeof(__u32))) + copy_in_user(&up->data_offset, &up32->data_offset, + sizeof(__u32))) return -EFAULT;
if (memory == V4L2_MEMORY_USERPTR) { @@ -374,7 +374,7 @@ static int get_v4l2_plane32(struct v4l2_ return -EFAULT; } else { if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, - sizeof(__u32))) + sizeof(__u32))) return -EFAULT; }
@@ -382,23 +382,23 @@ static int get_v4l2_plane32(struct v4l2_ }
static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, - enum v4l2_memory memory) + enum v4l2_memory memory) { if (copy_in_user(up32, up, 2 * sizeof(__u32)) || - copy_in_user(&up32->data_offset, &up->data_offset, - sizeof(__u32))) + copy_in_user(&up32->data_offset, &up->data_offset, + sizeof(__u32))) return -EFAULT;
/* For MMAP, driver might've set up the offset, so copy it back. * USERPTR stays the same (was userspace-provided), so no copying. */ if (memory == V4L2_MEMORY_MMAP) if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset, - sizeof(__u32))) + sizeof(__u32))) return -EFAULT; /* For DMABUF, driver might've set up the fd, so copy it back. */ if (memory == V4L2_MEMORY_DMABUF) if (copy_in_user(&up32->m.fd, &up->m.fd, - sizeof(int))) + sizeof(int))) return -EFAULT;
return 0; @@ -413,19 +413,19 @@ static int get_v4l2_buffer32(struct v4l2 int ret;
if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) || - get_user(kp->index, &up->index) || - get_user(kp->type, &up->type) || - get_user(kp->flags, &up->flags) || - get_user(kp->memory, &up->memory) || - get_user(kp->length, &up->length)) - return -EFAULT; + get_user(kp->index, &up->index) || + get_user(kp->type, &up->type) || + get_user(kp->flags, &up->flags) || + get_user(kp->memory, &up->memory) || + get_user(kp->length, &up->length)) + return -EFAULT;
if (V4L2_TYPE_IS_OUTPUT(kp->type)) if (get_user(kp->bytesused, &up->bytesused) || - get_user(kp->field, &up->field) || - get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - get_user(kp->timestamp.tv_usec, - &up->timestamp.tv_usec)) + get_user(kp->field, &up->field) || + get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + get_user(kp->timestamp.tv_usec, + &up->timestamp.tv_usec)) return -EFAULT;
if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { @@ -442,13 +442,13 @@ static int get_v4l2_buffer32(struct v4l2
uplane32 = compat_ptr(p); if (!access_ok(VERIFY_READ, uplane32, - num_planes * sizeof(struct v4l2_plane32))) + num_planes * sizeof(struct v4l2_plane32))) return -EFAULT;
/* We don't really care if userspace decides to kill itself * by passing a very big num_planes value */ uplane = compat_alloc_user_space(num_planes * - sizeof(struct v4l2_plane)); + sizeof(struct v4l2_plane)); kp->m.planes = (__force struct v4l2_plane *)uplane;
while (--num_planes >= 0) { @@ -466,12 +466,12 @@ static int get_v4l2_buffer32(struct v4l2 break; case V4L2_MEMORY_USERPTR: { - compat_long_t tmp; + compat_long_t tmp;
- if (get_user(tmp, &up->m.userptr)) - return -EFAULT; + if (get_user(tmp, &up->m.userptr)) + return -EFAULT;
- kp->m.userptr = (unsigned long)compat_ptr(tmp); + kp->m.userptr = (unsigned long)compat_ptr(tmp); } break; case V4L2_MEMORY_OVERLAY: @@ -497,22 +497,22 @@ static int put_v4l2_buffer32(struct v4l2 int ret;
if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) || - put_user(kp->index, &up->index) || - put_user(kp->type, &up->type) || - put_user(kp->flags, &up->flags) || - put_user(kp->memory, &up->memory)) - return -EFAULT; + put_user(kp->index, &up->index) || + put_user(kp->type, &up->type) || + put_user(kp->flags, &up->flags) || + put_user(kp->memory, &up->memory)) + return -EFAULT;
if (put_user(kp->bytesused, &up->bytesused) || - put_user(kp->field, &up->field) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || - copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->reserved2, &up->reserved2) || - put_user(kp->reserved, &up->reserved) || - put_user(kp->length, &up->length)) - return -EFAULT; + put_user(kp->field, &up->field) || + put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || + copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) || + put_user(kp->sequence, &up->sequence) || + put_user(kp->reserved2, &up->reserved2) || + put_user(kp->reserved, &up->reserved) || + put_user(kp->length, &up->length)) + return -EFAULT;
if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { num_planes = kp->length; @@ -576,11 +576,11 @@ static int get_v4l2_framebuffer32(struct u32 tmp;
if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) || - get_user(tmp, &up->base) || - get_user(kp->capability, &up->capability) || - get_user(kp->flags, &up->flags) || - copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt))) - return -EFAULT; + get_user(tmp, &up->base) || + get_user(kp->capability, &up->capability) || + get_user(kp->flags, &up->flags) || + copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt))) + return -EFAULT; kp->base = (__force void *)compat_ptr(tmp); return 0; } @@ -590,11 +590,11 @@ static int put_v4l2_framebuffer32(struct u32 tmp = (u32)((unsigned long)kp->base);
if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) || - put_user(tmp, &up->base) || - put_user(kp->capability, &up->capability) || - put_user(kp->flags, &up->flags) || - copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt))) - return -EFAULT; + put_user(tmp, &up->base) || + put_user(kp->capability, &up->capability) || + put_user(kp->flags, &up->flags) || + copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt))) + return -EFAULT; return 0; }
@@ -669,12 +669,12 @@ static int get_v4l2_ext_controls32(struc compat_caddr_t p;
if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) || - get_user(kp->ctrl_class, &up->ctrl_class) || - get_user(kp->count, &up->count) || - get_user(kp->error_idx, &up->error_idx) || - copy_from_user(kp->reserved, up->reserved, - sizeof(kp->reserved))) - return -EFAULT; + get_user(kp->ctrl_class, &up->ctrl_class) || + get_user(kp->count, &up->count) || + get_user(kp->error_idx, &up->error_idx) || + copy_from_user(kp->reserved, up->reserved, + sizeof(kp->reserved))) + return -EFAULT; n = kp->count; if (n == 0) { kp->controls = NULL; @@ -684,7 +684,7 @@ static int get_v4l2_ext_controls32(struc return -EFAULT; ucontrols = compat_ptr(p); if (!access_ok(VERIFY_READ, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + n * sizeof(struct v4l2_ext_control32))) return -EFAULT; kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control)); kp->controls = (__force struct v4l2_ext_control *)kcontrols; @@ -719,11 +719,11 @@ static int put_v4l2_ext_controls32(struc compat_caddr_t p;
if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) || - put_user(kp->ctrl_class, &up->ctrl_class) || - put_user(kp->count, &up->count) || - put_user(kp->error_idx, &up->error_idx) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) - return -EFAULT; + put_user(kp->ctrl_class, &up->ctrl_class) || + put_user(kp->count, &up->count) || + put_user(kp->error_idx, &up->error_idx) || + copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + return -EFAULT; if (!kp->count) return 0;
@@ -731,7 +731,7 @@ static int put_v4l2_ext_controls32(struc return -EFAULT; ucontrols = compat_ptr(p); if (!access_ok(VERIFY_WRITE, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + n * sizeof(struct v4l2_ext_control32))) return -EFAULT;
while (--n >= 0) { @@ -769,15 +769,15 @@ struct v4l2_event32 { static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) || - put_user(kp->type, &up->type) || - copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || - put_user(kp->pending, &up->pending) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || - put_user(kp->id, &up->id) || - copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) - return -EFAULT; + put_user(kp->type, &up->type) || + copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || + put_user(kp->pending, &up->pending) || + put_user(kp->sequence, &up->sequence) || + put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || + put_user(kp->id, &up->id) || + copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) + return -EFAULT; return 0; }
@@ -794,12 +794,12 @@ static int get_v4l2_edid32(struct v4l2_e u32 tmp;
if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) || - get_user(kp->pad, &up->pad) || - get_user(kp->start_block, &up->start_block) || - get_user(kp->blocks, &up->blocks) || - get_user(tmp, &up->edid) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) - return -EFAULT; + get_user(kp->pad, &up->pad) || + get_user(kp->start_block, &up->start_block) || + get_user(kp->blocks, &up->blocks) || + get_user(tmp, &up->edid) || + copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; kp->edid = (__force u8 *)compat_ptr(tmp); return 0; } @@ -809,12 +809,12 @@ static int put_v4l2_edid32(struct v4l2_e u32 tmp = (u32)((unsigned long)kp->edid);
if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) || - put_user(kp->pad, &up->pad) || - put_user(kp->start_block, &up->start_block) || - put_user(kp->blocks, &up->blocks) || - put_user(tmp, &up->edid) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) - return -EFAULT; + put_user(kp->pad, &up->pad) || + put_user(kp->start_block, &up->start_block) || + put_user(kp->blocks, &up->blocks) || + put_user(tmp, &up->edid) || + copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + return -EFAULT; return 0; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit 486c521510c44a04cd756a9267e7d1e271c8a4ba upstream.
These helper functions do not really help. Move the code to the __get/put_v4l2_format32 functions.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 104 +++++--------------------- 1 file changed, 20 insertions(+), 84 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -89,78 +89,6 @@ static int put_v4l2_window32(struct v4l2 return 0; }
-static inline int get_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up) -{ - if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format))) - return -EFAULT; - return 0; -} - -static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, - struct v4l2_pix_format_mplane __user *up) -{ - if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane))) - return -EFAULT; - return 0; -} - -static inline int put_v4l2_pix_format(struct v4l2_pix_format *kp, struct v4l2_pix_format __user *up) -{ - if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format))) - return -EFAULT; - return 0; -} - -static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, - struct v4l2_pix_format_mplane __user *up) -{ - if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane))) - return -EFAULT; - return 0; -} - -static inline int get_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up) -{ - if (copy_from_user(kp, up, sizeof(struct v4l2_vbi_format))) - return -EFAULT; - return 0; -} - -static inline int put_v4l2_vbi_format(struct v4l2_vbi_format *kp, struct v4l2_vbi_format __user *up) -{ - if (copy_to_user(up, kp, sizeof(struct v4l2_vbi_format))) - return -EFAULT; - return 0; -} - -static inline int get_v4l2_sliced_vbi_format(struct v4l2_sliced_vbi_format *kp, struct v4l2_sliced_vbi_format __user *up) -{ - if (copy_from_user(kp, up, sizeof(struct v4l2_sliced_vbi_format))) - return -EFAULT; - return 0; -} - -static inline int put_v4l2_sliced_vbi_format(struct v4l2_sliced_vbi_format *kp, struct v4l2_sliced_vbi_format __user *up) -{ - if (copy_to_user(up, kp, sizeof(struct v4l2_sliced_vbi_format))) - return -EFAULT; - return 0; -} - -static inline int get_v4l2_sdr_format(struct v4l2_sdr_format *kp, struct v4l2_sdr_format __user *up) -{ - if (copy_from_user(kp, up, sizeof(struct v4l2_sdr_format))) - return -EFAULT; - return 0; -} - -static inline int put_v4l2_sdr_format(struct v4l2_sdr_format *kp, struct v4l2_sdr_format __user *up) -{ - if (copy_to_user(up, kp, sizeof(struct v4l2_sdr_format))) - return -EFAULT; - return 0; -} - struct v4l2_format32 { __u32 type; /* enum v4l2_buf_type */ union { @@ -199,23 +127,27 @@ static int __get_v4l2_format32(struct v4 switch (kp->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return get_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix); + return copy_from_user(&kp->fmt.pix, &up->fmt.pix, + sizeof(kp->fmt.pix)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return get_v4l2_pix_format_mplane(&kp->fmt.pix_mp, - &up->fmt.pix_mp); + return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp, + sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: return get_v4l2_window32(&kp->fmt.win, &up->fmt.win); case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: - return get_v4l2_vbi_format(&kp->fmt.vbi, &up->fmt.vbi); + return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi, + sizeof(kp->fmt.vbi)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - return get_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced); + return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced, + sizeof(kp->fmt.sliced)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SDR_CAPTURE: case V4L2_BUF_TYPE_SDR_OUTPUT: - return get_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr); + return copy_from_user(&kp->fmt.sdr, &up->fmt.sdr, + sizeof(kp->fmt.sdr)) ? -EFAULT : 0; default: pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", kp->type); @@ -246,23 +178,27 @@ static int __put_v4l2_format32(struct v4 switch (kp->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return put_v4l2_pix_format(&kp->fmt.pix, &up->fmt.pix); + return copy_to_user(&up->fmt.pix, &kp->fmt.pix, + sizeof(kp->fmt.pix)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return put_v4l2_pix_format_mplane(&kp->fmt.pix_mp, - &up->fmt.pix_mp); + return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp, + sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: return put_v4l2_window32(&kp->fmt.win, &up->fmt.win); case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: - return put_v4l2_vbi_format(&kp->fmt.vbi, &up->fmt.vbi); + return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi, + sizeof(kp->fmt.vbi)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - return put_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced); + return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced, + sizeof(kp->fmt.sliced)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SDR_CAPTURE: case V4L2_BUF_TYPE_SDR_OUTPUT: - return put_v4l2_sdr_format(&kp->fmt.sdr, &up->fmt.sdr); + return copy_to_user(&up->fmt.sdr, &kp->fmt.sdr, + sizeof(kp->fmt.sdr)) ? -EFAULT : 0; default: pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", kp->type);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit 333b1e9f96ce05f7498b581509bb30cde03018bf upstream.
Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 77 ++++++++++++-------------- 1 file changed, 36 insertions(+), 41 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -47,7 +47,7 @@ struct v4l2_window32 {
static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || copy_from_user(&kp->w, &up->w, sizeof(up->w)) || get_user(kp->field, &up->field) || get_user(kp->chromakey, &up->chromakey) || @@ -64,7 +64,7 @@ static int get_v4l2_window32(struct v4l2 if (get_user(p, &up->clips)) return -EFAULT; uclips = compat_ptr(p); - kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip)); + kclips = compat_alloc_user_space(n * sizeof(*kclips)); kp->clips = kclips; while (--n >= 0) { if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c))) @@ -157,14 +157,14 @@ static int __get_v4l2_format32(struct v4
static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32))) + if (!access_ok(VERIFY_READ, up, sizeof(*up))) return -EFAULT; return __get_v4l2_format32(kp, up); }
static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format))) return -EFAULT; return __get_v4l2_format32(&kp->format, &up->format); @@ -208,14 +208,14 @@ static int __put_v4l2_format32(struct v4
static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32))) + if (!access_ok(VERIFY_WRITE, up, sizeof(*up))) return -EFAULT; return __put_v4l2_format32(kp, up); }
static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) || copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; @@ -234,7 +234,7 @@ struct v4l2_standard32 { static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) { /* other fields are not set by the user, nor used by the driver */ - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->index, &up->index)) return -EFAULT; return 0; @@ -242,13 +242,13 @@ static int get_v4l2_standard32(struct v4
static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->index, &up->index) || put_user(kp->id, &up->id) || - copy_to_user(up->name, kp->name, 24) || + copy_to_user(up->name, kp->name, sizeof(up->name)) || copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || put_user(kp->framelines, &up->framelines) || - copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32))) + copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; return 0; } @@ -296,7 +296,7 @@ static int get_v4l2_plane32(struct v4l2_
if (copy_in_user(up, up32, 2 * sizeof(__u32)) || copy_in_user(&up->data_offset, &up32->data_offset, - sizeof(__u32))) + sizeof(up->data_offset))) return -EFAULT;
if (memory == V4L2_MEMORY_USERPTR) { @@ -306,11 +306,11 @@ static int get_v4l2_plane32(struct v4l2_ if (put_user((unsigned long)up_pln, &up->m.userptr)) return -EFAULT; } else if (memory == V4L2_MEMORY_DMABUF) { - if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(int))) + if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd))) return -EFAULT; } else { if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, - sizeof(__u32))) + sizeof(up32->m.mem_offset))) return -EFAULT; }
@@ -322,19 +322,19 @@ static int put_v4l2_plane32(struct v4l2_ { if (copy_in_user(up32, up, 2 * sizeof(__u32)) || copy_in_user(&up32->data_offset, &up->data_offset, - sizeof(__u32))) + sizeof(up->data_offset))) return -EFAULT;
/* For MMAP, driver might've set up the offset, so copy it back. * USERPTR stays the same (was userspace-provided), so no copying. */ if (memory == V4L2_MEMORY_MMAP) if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset, - sizeof(__u32))) + sizeof(up->m.mem_offset))) return -EFAULT; /* For DMABUF, driver might've set up the fd, so copy it back. */ if (memory == V4L2_MEMORY_DMABUF) if (copy_in_user(&up32->m.fd, &up->m.fd, - sizeof(int))) + sizeof(up->m.fd))) return -EFAULT;
return 0; @@ -348,7 +348,7 @@ static int get_v4l2_buffer32(struct v4l2 int num_planes; int ret;
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->index, &up->index) || get_user(kp->type, &up->type) || get_user(kp->flags, &up->flags) || @@ -360,8 +360,7 @@ static int get_v4l2_buffer32(struct v4l2 if (get_user(kp->bytesused, &up->bytesused) || get_user(kp->field, &up->field) || get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - get_user(kp->timestamp.tv_usec, - &up->timestamp.tv_usec)) + get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec)) return -EFAULT;
if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { @@ -378,13 +377,12 @@ static int get_v4l2_buffer32(struct v4l2
uplane32 = compat_ptr(p); if (!access_ok(VERIFY_READ, uplane32, - num_planes * sizeof(struct v4l2_plane32))) + num_planes * sizeof(*uplane32))) return -EFAULT;
/* We don't really care if userspace decides to kill itself * by passing a very big num_planes value */ - uplane = compat_alloc_user_space(num_planes * - sizeof(struct v4l2_plane)); + uplane = compat_alloc_user_space(num_planes * sizeof(*uplane)); kp->m.planes = (__force struct v4l2_plane *)uplane;
while (--num_planes >= 0) { @@ -432,7 +430,7 @@ static int put_v4l2_buffer32(struct v4l2 int num_planes; int ret;
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->index, &up->index) || put_user(kp->type, &up->type) || put_user(kp->flags, &up->flags) || @@ -443,7 +441,7 @@ static int put_v4l2_buffer32(struct v4l2 put_user(kp->field, &up->field) || put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || - copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) || + copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) || put_user(kp->sequence, &up->sequence) || put_user(kp->reserved2, &up->reserved2) || put_user(kp->reserved, &up->reserved) || @@ -511,7 +509,7 @@ static int get_v4l2_framebuffer32(struct { u32 tmp;
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(tmp, &up->base) || get_user(kp->capability, &up->capability) || get_user(kp->flags, &up->flags) || @@ -525,7 +523,7 @@ static int put_v4l2_framebuffer32(struct { u32 tmp = (u32)((unsigned long)kp->base);
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(tmp, &up->base) || put_user(kp->capability, &up->capability) || put_user(kp->flags, &up->flags) || @@ -549,14 +547,14 @@ struct v4l2_input32 { Otherwise it is identical to the 32-bit version. */ static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) { - if (copy_from_user(kp, up, sizeof(struct v4l2_input32))) + if (copy_from_user(kp, up, sizeof(*up))) return -EFAULT; return 0; }
static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) { - if (copy_to_user(up, kp, sizeof(struct v4l2_input32))) + if (copy_to_user(up, kp, sizeof(*up))) return -EFAULT; return 0; } @@ -604,12 +602,11 @@ static int get_v4l2_ext_controls32(struc int n; compat_caddr_t p;
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->ctrl_class, &up->ctrl_class) || get_user(kp->count, &up->count) || get_user(kp->error_idx, &up->error_idx) || - copy_from_user(kp->reserved, up->reserved, - sizeof(kp->reserved))) + copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) return -EFAULT; n = kp->count; if (n == 0) { @@ -619,10 +616,9 @@ static int get_v4l2_ext_controls32(struc if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_READ, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols))) return -EFAULT; - kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control)); + kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols)); kp->controls = (__force struct v4l2_ext_control *)kcontrols; while (--n >= 0) { u32 id; @@ -654,7 +650,7 @@ static int put_v4l2_ext_controls32(struc int n = kp->count; compat_caddr_t p;
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->ctrl_class, &up->ctrl_class) || put_user(kp->count, &up->count) || put_user(kp->error_idx, &up->error_idx) || @@ -666,8 +662,7 @@ static int put_v4l2_ext_controls32(struc if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_WRITE, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols))) return -EFAULT;
while (--n >= 0) { @@ -704,7 +699,7 @@ struct v4l2_event32 {
static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->type, &up->type) || copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || put_user(kp->pending, &up->pending) || @@ -712,7 +707,7 @@ static int put_v4l2_event32(struct v4l2_ put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || put_user(kp->id, &up->id) || - copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) + copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; return 0; } @@ -729,7 +724,7 @@ static int get_v4l2_edid32(struct v4l2_e { u32 tmp;
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->pad, &up->pad) || get_user(kp->start_block, &up->start_block) || get_user(kp->blocks, &up->blocks) || @@ -744,7 +739,7 @@ static int put_v4l2_edid32(struct v4l2_e { u32 tmp = (u32)((unsigned long)kp->edid);
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->pad, &up->pad) || put_user(kp->start_block, &up->start_block) || put_user(kp->blocks, &up->blocks) ||
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit 8ed5a59dcb47a6f76034ee760b36e089f3e82529 upstream.
The struct v4l2_plane32 should set m.userptr as well. The same happens in v4l2_buffer32 and v4l2-compliance tests for this.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 47 +++++++++++++++----------- 1 file changed, 28 insertions(+), 19 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -299,19 +299,24 @@ static int get_v4l2_plane32(struct v4l2_ sizeof(up->data_offset))) return -EFAULT;
- if (memory == V4L2_MEMORY_USERPTR) { + switch (memory) { + case V4L2_MEMORY_MMAP: + case V4L2_MEMORY_OVERLAY: + if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, + sizeof(up32->m.mem_offset))) + return -EFAULT; + break; + case V4L2_MEMORY_USERPTR: if (get_user(p, &up32->m.userptr)) return -EFAULT; up_pln = compat_ptr(p); if (put_user((unsigned long)up_pln, &up->m.userptr)) return -EFAULT; - } else if (memory == V4L2_MEMORY_DMABUF) { + break; + case V4L2_MEMORY_DMABUF: if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd))) return -EFAULT; - } else { - if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, - sizeof(up32->m.mem_offset))) - return -EFAULT; + break; }
return 0; @@ -320,22 +325,32 @@ static int get_v4l2_plane32(struct v4l2_ static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, enum v4l2_memory memory) { + unsigned long p; + if (copy_in_user(up32, up, 2 * sizeof(__u32)) || copy_in_user(&up32->data_offset, &up->data_offset, sizeof(up->data_offset))) return -EFAULT;
- /* For MMAP, driver might've set up the offset, so copy it back. - * USERPTR stays the same (was userspace-provided), so no copying. */ - if (memory == V4L2_MEMORY_MMAP) + switch (memory) { + case V4L2_MEMORY_MMAP: + case V4L2_MEMORY_OVERLAY: if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset, sizeof(up->m.mem_offset))) return -EFAULT; - /* For DMABUF, driver might've set up the fd, so copy it back. */ - if (memory == V4L2_MEMORY_DMABUF) + break; + case V4L2_MEMORY_USERPTR: + if (get_user(p, &up->m.userptr) || + put_user((compat_ulong_t)ptr_to_compat((__force void *)p), + &up32->m.userptr)) + return -EFAULT; + break; + case V4L2_MEMORY_DMABUF: if (copy_in_user(&up32->m.fd, &up->m.fd, sizeof(up->m.fd))) return -EFAULT; + break; + }
return 0; } @@ -395,6 +410,7 @@ static int get_v4l2_buffer32(struct v4l2 } else { switch (kp->memory) { case V4L2_MEMORY_MMAP: + case V4L2_MEMORY_OVERLAY: if (get_user(kp->m.offset, &up->m.offset)) return -EFAULT; break; @@ -408,10 +424,6 @@ static int get_v4l2_buffer32(struct v4l2 kp->m.userptr = (unsigned long)compat_ptr(tmp); } break; - case V4L2_MEMORY_OVERLAY: - if (get_user(kp->m.offset, &up->m.offset)) - return -EFAULT; - break; case V4L2_MEMORY_DMABUF: if (get_user(kp->m.fd, &up->m.fd)) return -EFAULT; @@ -468,6 +480,7 @@ static int put_v4l2_buffer32(struct v4l2 } else { switch (kp->memory) { case V4L2_MEMORY_MMAP: + case V4L2_MEMORY_OVERLAY: if (put_user(kp->m.offset, &up->m.offset)) return -EFAULT; break; @@ -475,10 +488,6 @@ static int put_v4l2_buffer32(struct v4l2 if (put_user(kp->m.userptr, &up->m.userptr)) return -EFAULT; break; - case V4L2_MEMORY_OVERLAY: - if (put_user(kp->m.offset, &up->m.offset)) - return -EFAULT; - break; case V4L2_MEMORY_DMABUF: if (put_user(kp->m.fd, &up->m.fd)) return -EFAULT;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit b8c601e8af2d08f733d74defa8465303391bb930 upstream.
ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload.
Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly).
In both cases it can now check if the control is a pointer control or not.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 59 +++++++++++++++++--------- 1 file changed, 39 insertions(+), 20 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -18,6 +18,8 @@ #include <linux/videodev2.h> #include <linux/v4l2-subdev.h> #include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-ioctl.h>
static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) @@ -587,24 +589,39 @@ struct v4l2_ext_control32 { }; } __attribute__ ((packed));
-/* The following function really belong in v4l2-common, but that causes - a circular dependency between modules. We need to think about this, but - for now this will do. */ - -/* Return non-zero if this control is a pointer type. Currently only - type STRING is a pointer type. */ -static inline int ctrl_is_pointer(u32 id) -{ - switch (id) { - case V4L2_CID_RDS_TX_PS_NAME: - case V4L2_CID_RDS_TX_RADIO_TEXT: - return 1; - default: - return 0; +/* Return true if this control is a pointer type. */ +static inline bool ctrl_is_pointer(struct file *file, u32 id) +{ + struct video_device *vdev = video_devdata(file); + struct v4l2_fh *fh = NULL; + struct v4l2_ctrl_handler *hdl = NULL; + struct v4l2_query_ext_ctrl qec = { id }; + const struct v4l2_ioctl_ops *ops = vdev->ioctl_ops; + + if (test_bit(V4L2_FL_USES_V4L2_FH, &vdev->flags)) + fh = file->private_data; + + if (fh && fh->ctrl_handler) + hdl = fh->ctrl_handler; + else if (vdev->ctrl_handler) + hdl = vdev->ctrl_handler; + + if (hdl) { + struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, id); + + return ctrl && ctrl->is_ptr; } + + if (!ops->vidioc_query_ext_ctrl) + return false; + + return !ops->vidioc_query_ext_ctrl(file, fh, &qec) && + (qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD); }
-static int get_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up) +static int get_v4l2_ext_controls32(struct file *file, + struct v4l2_ext_controls *kp, + struct v4l2_ext_controls32 __user *up) { struct v4l2_ext_control32 __user *ucontrols; struct v4l2_ext_control __user *kcontrols; @@ -636,7 +653,7 @@ static int get_v4l2_ext_controls32(struc return -EFAULT; if (get_user(id, &kcontrols->id)) return -EFAULT; - if (ctrl_is_pointer(id)) { + if (ctrl_is_pointer(file, id)) { void __user *s;
if (get_user(p, &ucontrols->string)) @@ -651,7 +668,9 @@ static int get_v4l2_ext_controls32(struc return 0; }
-static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up) +static int put_v4l2_ext_controls32(struct file *file, + struct v4l2_ext_controls *kp, + struct v4l2_ext_controls32 __user *up) { struct v4l2_ext_control32 __user *ucontrols; struct v4l2_ext_control __user *kcontrols = @@ -683,7 +702,7 @@ static int put_v4l2_ext_controls32(struc /* Do not modify the pointer when copying a pointer control. The contents of the pointer was changed, not the pointer itself. */ - if (ctrl_is_pointer(id)) + if (ctrl_is_pointer(file, id)) size -= sizeof(ucontrols->value64); if (copy_in_user(ucontrols, kcontrols, size)) return -EFAULT; @@ -897,7 +916,7 @@ static long do_video_ioctl(struct file * case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - err = get_v4l2_ext_controls32(&karg.v2ecs, up); + err = get_v4l2_ext_controls32(file, &karg.v2ecs, up); compatible_arg = 0; break; case VIDIOC_DQEVENT: @@ -924,7 +943,7 @@ static long do_video_ioctl(struct file * case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - if (put_v4l2_ext_controls32(&karg.v2ecs, up)) + if (put_v4l2_ext_controls32(file, &karg.v2ecs, up)) err = -EFAULT; break; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hansverk@cisco.com
commit 273caa260035c03d89ad63d72d8cd3d9e5c5e3f1 upstream.
If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition.
All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here.
Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer")
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Reported-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -612,7 +612,7 @@ static inline bool ctrl_is_pointer(struc return ctrl && ctrl->is_ptr; }
- if (!ops->vidioc_query_ext_ctrl) + if (!ops || !ops->vidioc_query_ext_ctrl) return false;
return !ops->vidioc_query_ext_ctrl(file, fh, &qec) &&
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Mentz danielmentz@google.com
commit 025a26fa14f8fd55d50ab284a30c016a5be953d0 upstream.
Commit b2787845fb91 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth.
Signed-off-by: Daniel Mentz danielmentz@google.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -45,6 +45,7 @@ struct v4l2_window32 { compat_caddr_t clips; /* actually struct v4l2_clip32 * */ __u32 clipcount; compat_caddr_t bitmap; + __u8 global_alpha; };
static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) @@ -53,7 +54,8 @@ static int get_v4l2_window32(struct v4l2 copy_from_user(&kp->w, &up->w, sizeof(up->w)) || get_user(kp->field, &up->field) || get_user(kp->chromakey, &up->chromakey) || - get_user(kp->clipcount, &up->clipcount)) + get_user(kp->clipcount, &up->clipcount) || + get_user(kp->global_alpha, &up->global_alpha)) return -EFAULT; if (kp->clipcount > 2048) return -EINVAL; @@ -86,7 +88,8 @@ static int put_v4l2_window32(struct v4l2 if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || put_user(kp->field, &up->field) || put_user(kp->chromakey, &up->chromakey) || - put_user(kp->clipcount, &up->clipcount)) + put_user(kp->clipcount, &up->clipcount) || + put_user(kp->global_alpha, &up->global_alpha)) return -EFAULT; return 0; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit a751be5b142ef6bcbbb96d9899516f4d9c8d0ef4 upstream.
put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 59 +++++++++++++++++--------- 1 file changed, 40 insertions(+), 19 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -50,6 +50,11 @@ struct v4l2_window32 {
static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { + struct v4l2_clip32 __user *uclips; + struct v4l2_clip __user *kclips; + compat_caddr_t p; + u32 n; + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || copy_from_user(&kp->w, &up->w, sizeof(up->w)) || get_user(kp->field, &up->field) || @@ -59,38 +64,54 @@ static int get_v4l2_window32(struct v4l2 return -EFAULT; if (kp->clipcount > 2048) return -EINVAL; - if (kp->clipcount) { - struct v4l2_clip32 __user *uclips; - struct v4l2_clip __user *kclips; - int n = kp->clipcount; - compat_caddr_t p; + if (!kp->clipcount) { + kp->clips = NULL; + return 0; + }
- if (get_user(p, &up->clips)) + n = kp->clipcount; + if (get_user(p, &up->clips)) + return -EFAULT; + uclips = compat_ptr(p); + kclips = compat_alloc_user_space(n * sizeof(*kclips)); + kp->clips = kclips; + while (n--) { + if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c))) return -EFAULT; - uclips = compat_ptr(p); - kclips = compat_alloc_user_space(n * sizeof(*kclips)); - kp->clips = kclips; - while (--n >= 0) { - if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c))) - return -EFAULT; - if (put_user(n ? kclips + 1 : NULL, &kclips->next)) - return -EFAULT; - uclips += 1; - kclips += 1; - } - } else - kp->clips = NULL; + if (put_user(n ? kclips + 1 : NULL, &kclips->next)) + return -EFAULT; + uclips++; + kclips++; + } return 0; }
static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { + struct v4l2_clip __user *kclips = kp->clips; + struct v4l2_clip32 __user *uclips; + u32 n = kp->clipcount; + compat_caddr_t p; + if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || put_user(kp->field, &up->field) || put_user(kp->chromakey, &up->chromakey) || put_user(kp->clipcount, &up->clipcount) || put_user(kp->global_alpha, &up->global_alpha)) return -EFAULT; + + if (!kp->clipcount) + return 0; + + if (get_user(p, &up->clips)) + return -EFAULT; + uclips = compat_ptr(p); + while (n--) { + if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c))) + return -EFAULT; + uclips++; + kclips++; + } return 0; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit 169f24ca68bf0f247d111aef07af00dd3a02ae88 upstream.
There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 4 ---- 1 file changed, 4 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -175,8 +175,6 @@ static int __get_v4l2_format32(struct v4 return copy_from_user(&kp->fmt.sdr, &up->fmt.sdr, sizeof(kp->fmt.sdr)) ? -EFAULT : 0; default: - pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); return -EINVAL; } } @@ -226,8 +224,6 @@ static int __put_v4l2_format32(struct v4 return copy_to_user(&up->fmt.sdr, &kp->fmt.sdr, sizeof(kp->fmt.sdr)) ? -EFAULT : 0; default: - pr_info("compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); return -EINVAL; } }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans Verkuil hans.verkuil@cisco.com
commit d83a8243aaefe62ace433e4384a4f077bed86acb upstream.
Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases.
Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -956,6 +956,9 @@ static long do_video_ioctl(struct file * set_fs(old_fs); }
+ if (err == -ENOTTY) + return err; + /* Special case: even after an error we need to put the results back for these ioctls since the error_idx will contain information on which control failed. */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Mentz danielmentz@google.com
commit a1dfb4c48cc1e64eeb7800a27c66a6f7e88d075a upstream.
The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space().
However, due to how that function is implemented, it can only be called a single time for every syscall invocation.
Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space().
Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access.
The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted.
An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel:
if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT;
Notes from hans.verkuil@cisco.com:
This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953...
Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago.
This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function.
Fixes: 6b5a9492ca ("v4l: introduce string control support.")
Signed-off-by: Daniel Mentz danielmentz@google.com Co-developed-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 752 ++++++++++++++++---------- 1 file changed, 487 insertions(+), 265 deletions(-)
--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -22,6 +22,14 @@ #include <media/v4l2-ctrls.h> #include <media/v4l2-ioctl.h>
+/* Use the same argument order as copy_in_user */ +#define assign_in_user(to, from) \ +({ \ + typeof(*from) __assign_tmp; \ + \ + get_user(__assign_tmp, from) || put_user(__assign_tmp, to); \ +}) + static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long ret = -ENOIOCTLCMD; @@ -35,12 +43,12 @@ static long native_ioctl(struct file *fi
struct v4l2_clip32 { struct v4l2_rect c; - compat_caddr_t next; + compat_caddr_t next; };
struct v4l2_window32 { struct v4l2_rect w; - __u32 field; /* enum v4l2_field */ + __u32 field; /* enum v4l2_field */ __u32 chromakey; compat_caddr_t clips; /* actually struct v4l2_clip32 * */ __u32 clipcount; @@ -48,37 +56,41 @@ struct v4l2_window32 { __u8 global_alpha; };
-static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) +static int get_v4l2_window32(struct v4l2_window __user *kp, + struct v4l2_window32 __user *up, + void __user *aux_buf, u32 aux_space) { struct v4l2_clip32 __user *uclips; struct v4l2_clip __user *kclips; compat_caddr_t p; - u32 n; + u32 clipcount;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - copy_from_user(&kp->w, &up->w, sizeof(up->w)) || - get_user(kp->field, &up->field) || - get_user(kp->chromakey, &up->chromakey) || - get_user(kp->clipcount, &up->clipcount) || - get_user(kp->global_alpha, &up->global_alpha)) + copy_in_user(&kp->w, &up->w, sizeof(up->w)) || + assign_in_user(&kp->field, &up->field) || + assign_in_user(&kp->chromakey, &up->chromakey) || + assign_in_user(&kp->global_alpha, &up->global_alpha) || + get_user(clipcount, &up->clipcount) || + put_user(clipcount, &kp->clipcount)) return -EFAULT; - if (kp->clipcount > 2048) + if (clipcount > 2048) return -EINVAL; - if (!kp->clipcount) { - kp->clips = NULL; - return 0; - } + if (!clipcount) + return put_user(NULL, &kp->clips);
- n = kp->clipcount; if (get_user(p, &up->clips)) return -EFAULT; uclips = compat_ptr(p); - kclips = compat_alloc_user_space(n * sizeof(*kclips)); - kp->clips = kclips; - while (n--) { + if (aux_space < clipcount * sizeof(*kclips)) + return -EFAULT; + kclips = aux_buf; + if (put_user(kclips, &kp->clips)) + return -EFAULT; + + while (clipcount--) { if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c))) return -EFAULT; - if (put_user(n ? kclips + 1 : NULL, &kclips->next)) + if (put_user(clipcount ? kclips + 1 : NULL, &kclips->next)) return -EFAULT; uclips++; kclips++; @@ -86,27 +98,28 @@ static int get_v4l2_window32(struct v4l2 return 0; }
-static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) +static int put_v4l2_window32(struct v4l2_window __user *kp, + struct v4l2_window32 __user *up) { struct v4l2_clip __user *kclips = kp->clips; struct v4l2_clip32 __user *uclips; - u32 n = kp->clipcount; compat_caddr_t p; + u32 clipcount;
- if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || - put_user(kp->field, &up->field) || - put_user(kp->chromakey, &up->chromakey) || - put_user(kp->clipcount, &up->clipcount) || - put_user(kp->global_alpha, &up->global_alpha)) + if (copy_in_user(&up->w, &kp->w, sizeof(kp->w)) || + assign_in_user(&up->field, &kp->field) || + assign_in_user(&up->chromakey, &kp->chromakey) || + assign_in_user(&up->global_alpha, &kp->global_alpha) || + get_user(clipcount, &kp->clipcount) || + put_user(clipcount, &up->clipcount)) return -EFAULT; - - if (!kp->clipcount) + if (!clipcount) return 0;
if (get_user(p, &up->clips)) return -EFAULT; uclips = compat_ptr(p); - while (n--) { + while (clipcount--) { if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c))) return -EFAULT; uclips++; @@ -145,101 +158,158 @@ struct v4l2_create_buffers32 { __u32 reserved[8]; };
-static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int __bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size) +{ + u32 type; + + if (get_user(type, &up->type)) + return -EFAULT; + + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: { + u32 clipcount; + + if (get_user(clipcount, &up->fmt.win.clipcount)) + return -EFAULT; + if (clipcount > 2048) + return -EINVAL; + *size = clipcount * sizeof(struct v4l2_clip); + return 0; + } + default: + *size = 0; + return 0; + } +} + +static int bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size) { - if (get_user(kp->type, &up->type)) + if (!access_ok(VERIFY_READ, up, sizeof(*up))) return -EFAULT; + return __bufsize_v4l2_format(up, size); +}
- switch (kp->type) { +static int __get_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up, + void __user *aux_buf, u32 aux_space) +{ + u32 type; + + if (get_user(type, &up->type) || put_user(type, &kp->type)) + return -EFAULT; + + switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return copy_from_user(&kp->fmt.pix, &up->fmt.pix, - sizeof(kp->fmt.pix)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.pix, &up->fmt.pix, + sizeof(kp->fmt.pix)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp, - sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.pix_mp, &up->fmt.pix_mp, + sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - return get_v4l2_window32(&kp->fmt.win, &up->fmt.win); + return get_v4l2_window32(&kp->fmt.win, &up->fmt.win, + aux_buf, aux_space); case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: - return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi, - sizeof(kp->fmt.vbi)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.vbi, &up->fmt.vbi, + sizeof(kp->fmt.vbi)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced, - sizeof(kp->fmt.sliced)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.sliced, &up->fmt.sliced, + sizeof(kp->fmt.sliced)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SDR_CAPTURE: case V4L2_BUF_TYPE_SDR_OUTPUT: - return copy_from_user(&kp->fmt.sdr, &up->fmt.sdr, - sizeof(kp->fmt.sdr)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.sdr, &up->fmt.sdr, + sizeof(kp->fmt.sdr)) ? -EFAULT : 0; default: return -EINVAL; } }
-static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int get_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up, + void __user *aux_buf, u32 aux_space) +{ + if (!access_ok(VERIFY_READ, up, sizeof(*up))) + return -EFAULT; + return __get_v4l2_format32(kp, up, aux_buf, aux_space); +} + +static int bufsize_v4l2_create(struct v4l2_create_buffers32 __user *up, + u32 *size) { if (!access_ok(VERIFY_READ, up, sizeof(*up))) return -EFAULT; - return __get_v4l2_format32(kp, up); + return __bufsize_v4l2_format(&up->format, size); }
-static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) +static int get_v4l2_create32(struct v4l2_create_buffers __user *kp, + struct v4l2_create_buffers32 __user *up, + void __user *aux_buf, u32 aux_space) { if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format))) + copy_in_user(kp, up, + offsetof(struct v4l2_create_buffers32, format))) return -EFAULT; - return __get_v4l2_format32(&kp->format, &up->format); + return __get_v4l2_format32(&kp->format, &up->format, + aux_buf, aux_space); }
-static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int __put_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up) { - if (put_user(kp->type, &up->type)) + u32 type; + + if (get_user(type, &kp->type)) return -EFAULT;
- switch (kp->type) { + switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return copy_to_user(&up->fmt.pix, &kp->fmt.pix, + return copy_in_user(&up->fmt.pix, &kp->fmt.pix, sizeof(kp->fmt.pix)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp, + return copy_in_user(&up->fmt.pix_mp, &kp->fmt.pix_mp, sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: return put_v4l2_window32(&kp->fmt.win, &up->fmt.win); case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: - return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi, + return copy_in_user(&up->fmt.vbi, &kp->fmt.vbi, sizeof(kp->fmt.vbi)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced, + return copy_in_user(&up->fmt.sliced, &kp->fmt.sliced, sizeof(kp->fmt.sliced)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SDR_CAPTURE: case V4L2_BUF_TYPE_SDR_OUTPUT: - return copy_to_user(&up->fmt.sdr, &kp->fmt.sdr, + return copy_in_user(&up->fmt.sdr, &kp->fmt.sdr, sizeof(kp->fmt.sdr)) ? -EFAULT : 0; default: return -EINVAL; } }
-static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int put_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up))) return -EFAULT; return __put_v4l2_format32(kp, up); }
-static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) +static int put_v4l2_create32(struct v4l2_create_buffers __user *kp, + struct v4l2_create_buffers32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) || - copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + copy_in_user(up, kp, + offsetof(struct v4l2_create_buffers32, format)) || + copy_in_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; return __put_v4l2_format32(&kp->format, &up->format); } @@ -253,24 +323,27 @@ struct v4l2_standard32 { __u32 reserved[4]; };
-static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) +static int get_v4l2_standard32(struct v4l2_standard __user *kp, + struct v4l2_standard32 __user *up) { /* other fields are not set by the user, nor used by the driver */ if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->index, &up->index)) + assign_in_user(&kp->index, &up->index)) return -EFAULT; return 0; }
-static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) +static int put_v4l2_standard32(struct v4l2_standard __user *kp, + struct v4l2_standard32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->index, &up->index) || - put_user(kp->id, &up->id) || - copy_to_user(up->name, kp->name, sizeof(up->name)) || - copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || - put_user(kp->framelines, &up->framelines) || - copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + assign_in_user(&up->index, &kp->index) || + assign_in_user(&up->id, &kp->id) || + copy_in_user(up->name, kp->name, sizeof(up->name)) || + copy_in_user(&up->frameperiod, &kp->frameperiod, + sizeof(up->frameperiod)) || + assign_in_user(&up->framelines, &kp->framelines) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved))) return -EFAULT; return 0; } @@ -310,11 +383,11 @@ struct v4l2_buffer32 { __u32 reserved; };
-static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, +static int get_v4l2_plane32(struct v4l2_plane __user *up, + struct v4l2_plane32 __user *up32, enum v4l2_memory memory) { - void __user *up_pln; - compat_long_t p; + compat_ulong_t p;
if (copy_in_user(up, up32, 2 * sizeof(__u32)) || copy_in_user(&up->data_offset, &up32->data_offset, @@ -329,10 +402,8 @@ static int get_v4l2_plane32(struct v4l2_ return -EFAULT; break; case V4L2_MEMORY_USERPTR: - if (get_user(p, &up32->m.userptr)) - return -EFAULT; - up_pln = compat_ptr(p); - if (put_user((unsigned long)up_pln, &up->m.userptr)) + if (get_user(p, &up32->m.userptr) || + put_user((unsigned long)compat_ptr(p), &up->m.userptr)) return -EFAULT; break; case V4L2_MEMORY_DMABUF: @@ -344,7 +415,8 @@ static int get_v4l2_plane32(struct v4l2_ return 0; }
-static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, +static int put_v4l2_plane32(struct v4l2_plane __user *up, + struct v4l2_plane32 __user *up32, enum v4l2_memory memory) { unsigned long p; @@ -368,8 +440,7 @@ static int put_v4l2_plane32(struct v4l2_ return -EFAULT; break; case V4L2_MEMORY_DMABUF: - if (copy_in_user(&up32->m.fd, &up->m.fd, - sizeof(up->m.fd))) + if (copy_in_user(&up32->m.fd, &up->m.fd, sizeof(up->m.fd))) return -EFAULT; break; } @@ -377,37 +448,75 @@ static int put_v4l2_plane32(struct v4l2_ return 0; }
-static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up) +static int bufsize_v4l2_buffer(struct v4l2_buffer32 __user *up, u32 *size) { + u32 type; + u32 length; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + get_user(type, &up->type) || + get_user(length, &up->length)) + return -EFAULT; + + if (V4L2_TYPE_IS_MULTIPLANAR(type)) { + if (length > VIDEO_MAX_PLANES) + return -EINVAL; + + /* + * We don't really care if userspace decides to kill itself + * by passing a very big length value + */ + *size = length * sizeof(struct v4l2_plane); + } else { + *size = 0; + } + return 0; +} + +static int get_v4l2_buffer32(struct v4l2_buffer __user *kp, + struct v4l2_buffer32 __user *up, + void __user *aux_buf, u32 aux_space) +{ + u32 type; + u32 length; + enum v4l2_memory memory; struct v4l2_plane32 __user *uplane32; struct v4l2_plane __user *uplane; compat_caddr_t p; - int num_planes; int ret;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->index, &up->index) || - get_user(kp->type, &up->type) || - get_user(kp->flags, &up->flags) || - get_user(kp->memory, &up->memory) || - get_user(kp->length, &up->length)) - return -EFAULT; - - if (V4L2_TYPE_IS_OUTPUT(kp->type)) - if (get_user(kp->bytesused, &up->bytesused) || - get_user(kp->field, &up->field) || - get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec)) + assign_in_user(&kp->index, &up->index) || + get_user(type, &up->type) || + put_user(type, &kp->type) || + assign_in_user(&kp->flags, &up->flags) || + get_user(memory, &up->memory) || + put_user(memory, &kp->memory) || + get_user(length, &up->length) || + put_user(length, &kp->length)) + return -EFAULT; + + if (V4L2_TYPE_IS_OUTPUT(type)) + if (assign_in_user(&kp->bytesused, &up->bytesused) || + assign_in_user(&kp->field, &up->field) || + assign_in_user(&kp->timestamp.tv_sec, + &up->timestamp.tv_sec) || + assign_in_user(&kp->timestamp.tv_usec, + &up->timestamp.tv_usec)) return -EFAULT;
- if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { - num_planes = kp->length; + if (V4L2_TYPE_IS_MULTIPLANAR(type)) { + u32 num_planes = length; + if (num_planes == 0) { - kp->m.planes = NULL; - /* num_planes == 0 is legal, e.g. when userspace doesn't - * need planes array on DQBUF*/ - return 0; + /* + * num_planes == 0 is legal, e.g. when userspace doesn't + * need planes array on DQBUF + */ + return put_user(NULL, &kp->m.planes); } + if (num_planes > VIDEO_MAX_PLANES) + return -EINVAL;
if (get_user(p, &up->m.planes)) return -EFAULT; @@ -417,37 +526,43 @@ static int get_v4l2_buffer32(struct v4l2 num_planes * sizeof(*uplane32))) return -EFAULT;
- /* We don't really care if userspace decides to kill itself - * by passing a very big num_planes value */ - uplane = compat_alloc_user_space(num_planes * sizeof(*uplane)); - kp->m.planes = (__force struct v4l2_plane *)uplane; + /* + * We don't really care if userspace decides to kill itself + * by passing a very big num_planes value + */ + if (aux_space < num_planes * sizeof(*uplane)) + return -EFAULT; + + uplane = aux_buf; + if (put_user((__force struct v4l2_plane *)uplane, + &kp->m.planes)) + return -EFAULT;
- while (--num_planes >= 0) { - ret = get_v4l2_plane32(uplane, uplane32, kp->memory); + while (num_planes--) { + ret = get_v4l2_plane32(uplane, uplane32, memory); if (ret) return ret; - ++uplane; - ++uplane32; + uplane++; + uplane32++; } } else { - switch (kp->memory) { + switch (memory) { case V4L2_MEMORY_MMAP: case V4L2_MEMORY_OVERLAY: - if (get_user(kp->m.offset, &up->m.offset)) + if (assign_in_user(&kp->m.offset, &up->m.offset)) return -EFAULT; break; - case V4L2_MEMORY_USERPTR: - { - compat_long_t tmp; - - if (get_user(tmp, &up->m.userptr)) - return -EFAULT; + case V4L2_MEMORY_USERPTR: { + compat_ulong_t userptr;
- kp->m.userptr = (unsigned long)compat_ptr(tmp); - } + if (get_user(userptr, &up->m.userptr) || + put_user((unsigned long)compat_ptr(userptr), + &kp->m.userptr)) + return -EFAULT; break; + } case V4L2_MEMORY_DMABUF: - if (get_user(kp->m.fd, &up->m.fd)) + if (assign_in_user(&kp->m.fd, &up->m.fd)) return -EFAULT; break; } @@ -456,62 +571,70 @@ static int get_v4l2_buffer32(struct v4l2 return 0; }
-static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up) +static int put_v4l2_buffer32(struct v4l2_buffer __user *kp, + struct v4l2_buffer32 __user *up) { + u32 type; + u32 length; + enum v4l2_memory memory; struct v4l2_plane32 __user *uplane32; struct v4l2_plane __user *uplane; compat_caddr_t p; - int num_planes; int ret;
if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->index, &up->index) || - put_user(kp->type, &up->type) || - put_user(kp->flags, &up->flags) || - put_user(kp->memory, &up->memory)) - return -EFAULT; - - if (put_user(kp->bytesused, &up->bytesused) || - put_user(kp->field, &up->field) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || - copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->reserved2, &up->reserved2) || - put_user(kp->reserved, &up->reserved) || - put_user(kp->length, &up->length)) + assign_in_user(&up->index, &kp->index) || + get_user(type, &kp->type) || + put_user(type, &up->type) || + assign_in_user(&up->flags, &kp->flags) || + get_user(memory, &kp->memory) || + put_user(memory, &up->memory)) + return -EFAULT; + + if (assign_in_user(&up->bytesused, &kp->bytesused) || + assign_in_user(&up->field, &kp->field) || + assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) || + assign_in_user(&up->timestamp.tv_usec, &kp->timestamp.tv_usec) || + copy_in_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) || + assign_in_user(&up->sequence, &kp->sequence) || + assign_in_user(&up->reserved2, &kp->reserved2) || + assign_in_user(&up->reserved, &kp->reserved) || + get_user(length, &kp->length) || + put_user(length, &up->length)) return -EFAULT;
- if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { - num_planes = kp->length; + if (V4L2_TYPE_IS_MULTIPLANAR(type)) { + u32 num_planes = length; + if (num_planes == 0) return 0;
- uplane = (__force struct v4l2_plane __user *)kp->m.planes; + if (get_user(uplane, ((__force struct v4l2_plane __user **)&kp->m.planes))) + return -EFAULT; if (get_user(p, &up->m.planes)) return -EFAULT; uplane32 = compat_ptr(p);
- while (--num_planes >= 0) { - ret = put_v4l2_plane32(uplane, uplane32, kp->memory); + while (num_planes--) { + ret = put_v4l2_plane32(uplane, uplane32, memory); if (ret) return ret; ++uplane; ++uplane32; } } else { - switch (kp->memory) { + switch (memory) { case V4L2_MEMORY_MMAP: case V4L2_MEMORY_OVERLAY: - if (put_user(kp->m.offset, &up->m.offset)) + if (assign_in_user(&up->m.offset, &kp->m.offset)) return -EFAULT; break; case V4L2_MEMORY_USERPTR: - if (put_user(kp->m.userptr, &up->m.userptr)) + if (assign_in_user(&up->m.userptr, &kp->m.userptr)) return -EFAULT; break; case V4L2_MEMORY_DMABUF: - if (put_user(kp->m.fd, &up->m.fd)) + if (assign_in_user(&up->m.fd, &kp->m.fd)) return -EFAULT; break; } @@ -523,7 +646,7 @@ static int put_v4l2_buffer32(struct v4l2 struct v4l2_framebuffer32 { __u32 capability; __u32 flags; - compat_caddr_t base; + compat_caddr_t base; struct { __u32 width; __u32 height; @@ -536,29 +659,32 @@ struct v4l2_framebuffer32 { } fmt; };
-static int get_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up) +static int get_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp, + struct v4l2_framebuffer32 __user *up) { - u32 tmp; + compat_caddr_t tmp;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(tmp, &up->base) || - get_user(kp->capability, &up->capability) || - get_user(kp->flags, &up->flags) || - copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt))) + put_user((__force void *)compat_ptr(tmp), &kp->base) || + assign_in_user(&kp->capability, &up->capability) || + assign_in_user(&kp->flags, &up->flags) || + copy_in_user(&kp->fmt, &up->fmt, sizeof(kp->fmt))) return -EFAULT; - kp->base = (__force void *)compat_ptr(tmp); return 0; }
-static int put_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up) +static int put_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp, + struct v4l2_framebuffer32 __user *up) { - u32 tmp = (u32)((unsigned long)kp->base); + void *base;
if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(tmp, &up->base) || - put_user(kp->capability, &up->capability) || - put_user(kp->flags, &up->flags) || - copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt))) + get_user(base, &kp->base) || + put_user(ptr_to_compat(base), &up->base) || + assign_in_user(&up->capability, &kp->capability) || + assign_in_user(&up->flags, &kp->flags) || + copy_in_user(&up->fmt, &kp->fmt, sizeof(kp->fmt))) return -EFAULT; return 0; } @@ -571,21 +697,26 @@ struct v4l2_input32 { __u32 tuner; /* Associated tuner */ compat_u64 std; __u32 status; - __u32 reserved[4]; + __u32 capabilities; + __u32 reserved[3]; };
-/* The 64-bit v4l2_input struct has extra padding at the end of the struct. - Otherwise it is identical to the 32-bit version. */ -static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) +/* + * The 64-bit v4l2_input struct has extra padding at the end of the struct. + * Otherwise it is identical to the 32-bit version. + */ +static inline int get_v4l2_input32(struct v4l2_input __user *kp, + struct v4l2_input32 __user *up) { - if (copy_from_user(kp, up, sizeof(*up))) + if (copy_in_user(kp, up, sizeof(*up))) return -EFAULT; return 0; }
-static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) +static inline int put_v4l2_input32(struct v4l2_input __user *kp, + struct v4l2_input32 __user *up) { - if (copy_to_user(up, kp, sizeof(*up))) + if (copy_in_user(up, kp, sizeof(*up))) return -EFAULT; return 0; } @@ -639,40 +770,64 @@ static inline bool ctrl_is_pointer(struc (qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD); }
+static int bufsize_v4l2_ext_controls(struct v4l2_ext_controls32 __user *up, + u32 *size) +{ + u32 count; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + get_user(count, &up->count)) + return -EFAULT; + if (count > V4L2_CID_MAX_CTRLS) + return -EINVAL; + *size = count * sizeof(struct v4l2_ext_control); + return 0; +} + static int get_v4l2_ext_controls32(struct file *file, - struct v4l2_ext_controls *kp, - struct v4l2_ext_controls32 __user *up) + struct v4l2_ext_controls __user *kp, + struct v4l2_ext_controls32 __user *up, + void __user *aux_buf, u32 aux_space) { struct v4l2_ext_control32 __user *ucontrols; struct v4l2_ext_control __user *kcontrols; - int n; + u32 count; + u32 n; compat_caddr_t p;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->ctrl_class, &up->ctrl_class) || - get_user(kp->count, &up->count) || - get_user(kp->error_idx, &up->error_idx) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) - return -EFAULT; - n = kp->count; - if (n == 0) { - kp->controls = NULL; - return 0; - } + assign_in_user(&kp->ctrl_class, &up->ctrl_class) || + get_user(count, &up->count) || + put_user(count, &kp->count) || + assign_in_user(&kp->error_idx, &up->error_idx) || + copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; + + if (count == 0) + return put_user(NULL, &kp->controls); + if (count > V4L2_CID_MAX_CTRLS) + return -EINVAL; if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols))) + if (!access_ok(VERIFY_READ, ucontrols, count * sizeof(*ucontrols))) + return -EFAULT; + if (aux_space < count * sizeof(*kcontrols)) return -EFAULT; - kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols)); - kp->controls = (__force struct v4l2_ext_control *)kcontrols; - while (--n >= 0) { + kcontrols = aux_buf; + if (put_user((__force struct v4l2_ext_control *)kcontrols, + &kp->controls)) + return -EFAULT; + + for (n = 0; n < count; n++) { u32 id;
if (copy_in_user(kcontrols, ucontrols, sizeof(*ucontrols))) return -EFAULT; + if (get_user(id, &kcontrols->id)) return -EFAULT; + if (ctrl_is_pointer(file, id)) { void __user *s;
@@ -689,43 +844,54 @@ static int get_v4l2_ext_controls32(struc }
static int put_v4l2_ext_controls32(struct file *file, - struct v4l2_ext_controls *kp, + struct v4l2_ext_controls __user *kp, struct v4l2_ext_controls32 __user *up) { struct v4l2_ext_control32 __user *ucontrols; - struct v4l2_ext_control __user *kcontrols = - (__force struct v4l2_ext_control __user *)kp->controls; - int n = kp->count; + struct v4l2_ext_control __user *kcontrols; + u32 count; + u32 n; compat_caddr_t p;
if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->ctrl_class, &up->ctrl_class) || - put_user(kp->count, &up->count) || - put_user(kp->error_idx, &up->error_idx) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + assign_in_user(&up->ctrl_class, &kp->ctrl_class) || + get_user(count, &kp->count) || + put_user(count, &up->count) || + assign_in_user(&up->error_idx, &kp->error_idx) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)) || + get_user(kcontrols, &kp->controls)) return -EFAULT; - if (!kp->count) - return 0;
+ if (!count) + return 0; if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols))) + if (!access_ok(VERIFY_WRITE, ucontrols, count * sizeof(*ucontrols))) return -EFAULT;
- while (--n >= 0) { - unsigned size = sizeof(*ucontrols); + for (n = 0; n < count; n++) { + unsigned int size = sizeof(*ucontrols); u32 id;
- if (get_user(id, &kcontrols->id)) + if (get_user(id, &kcontrols->id) || + put_user(id, &ucontrols->id) || + assign_in_user(&ucontrols->size, &kcontrols->size) || + copy_in_user(&ucontrols->reserved2, &kcontrols->reserved2, + sizeof(ucontrols->reserved2))) return -EFAULT; - /* Do not modify the pointer when copying a pointer control. - The contents of the pointer was changed, not the pointer - itself. */ + + /* + * Do not modify the pointer when copying a pointer control. + * The contents of the pointer was changed, not the pointer + * itself. + */ if (ctrl_is_pointer(file, id)) size -= sizeof(ucontrols->value64); + if (copy_in_user(ucontrols, kcontrols, size)) return -EFAULT; + ucontrols++; kcontrols++; } @@ -745,17 +911,18 @@ struct v4l2_event32 { __u32 reserved[8]; };
-static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) +static int put_v4l2_event32(struct v4l2_event __user *kp, + struct v4l2_event32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->type, &up->type) || - copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || - put_user(kp->pending, &up->pending) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || - put_user(kp->id, &up->id) || - copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + assign_in_user(&up->type, &kp->type) || + copy_in_user(&up->u, &kp->u, sizeof(kp->u)) || + assign_in_user(&up->pending, &kp->pending) || + assign_in_user(&up->sequence, &kp->sequence) || + assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) || + assign_in_user(&up->timestamp.tv_nsec, &kp->timestamp.tv_nsec) || + assign_in_user(&up->id, &kp->id) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved))) return -EFAULT; return 0; } @@ -768,31 +935,34 @@ struct v4l2_edid32 { compat_caddr_t edid; };
-static int get_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up) +static int get_v4l2_edid32(struct v4l2_edid __user *kp, + struct v4l2_edid32 __user *up) { - u32 tmp; + compat_uptr_t tmp;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->pad, &up->pad) || - get_user(kp->start_block, &up->start_block) || - get_user(kp->blocks, &up->blocks) || + assign_in_user(&kp->pad, &up->pad) || + assign_in_user(&kp->start_block, &up->start_block) || + assign_in_user(&kp->blocks, &up->blocks) || get_user(tmp, &up->edid) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + put_user(compat_ptr(tmp), &kp->edid) || + copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved))) return -EFAULT; - kp->edid = (__force u8 *)compat_ptr(tmp); return 0; }
-static int put_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up) +static int put_v4l2_edid32(struct v4l2_edid __user *kp, + struct v4l2_edid32 __user *up) { - u32 tmp = (u32)((unsigned long)kp->edid); + void *edid;
if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->pad, &up->pad) || - put_user(kp->start_block, &up->start_block) || - put_user(kp->blocks, &up->blocks) || - put_user(tmp, &up->edid) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + assign_in_user(&up->pad, &kp->pad) || + assign_in_user(&up->start_block, &kp->start_block) || + assign_in_user(&up->blocks, &kp->blocks) || + get_user(edid, &kp->edid) || + put_user(ptr_to_compat(edid), &up->edid) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved))) return -EFAULT; return 0; } @@ -809,7 +979,7 @@ static int put_v4l2_edid32(struct v4l2_e #define VIDIOC_ENUMINPUT32 _IOWR('V', 26, struct v4l2_input32) #define VIDIOC_G_EDID32 _IOWR('V', 40, struct v4l2_edid32) #define VIDIOC_S_EDID32 _IOWR('V', 41, struct v4l2_edid32) -#define VIDIOC_TRY_FMT32 _IOWR('V', 64, struct v4l2_format32) +#define VIDIOC_TRY_FMT32 _IOWR('V', 64, struct v4l2_format32) #define VIDIOC_G_EXT_CTRLS32 _IOWR('V', 71, struct v4l2_ext_controls32) #define VIDIOC_S_EXT_CTRLS32 _IOWR('V', 72, struct v4l2_ext_controls32) #define VIDIOC_TRY_EXT_CTRLS32 _IOWR('V', 73, struct v4l2_ext_controls32) @@ -825,22 +995,23 @@ static int put_v4l2_edid32(struct v4l2_e #define VIDIOC_G_OUTPUT32 _IOR ('V', 46, s32) #define VIDIOC_S_OUTPUT32 _IOWR('V', 47, s32)
+static int alloc_userspace(unsigned int size, u32 aux_space, + void __user **up_native) +{ + *up_native = compat_alloc_user_space(size + aux_space); + if (!*up_native) + return -ENOMEM; + if (clear_user(*up_native, size)) + return -EFAULT; + return 0; +} + static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - union { - struct v4l2_format v2f; - struct v4l2_buffer v2b; - struct v4l2_framebuffer v2fb; - struct v4l2_input v2i; - struct v4l2_standard v2s; - struct v4l2_ext_controls v2ecs; - struct v4l2_event v2ev; - struct v4l2_create_buffers v2crt; - struct v4l2_edid v2edid; - unsigned long vx; - int vi; - } karg; void __user *up = compat_ptr(arg); + void __user *up_native = NULL; + void __user *aux_buf; + u32 aux_space; int compatible_arg = 1; long err = 0;
@@ -879,30 +1050,52 @@ static long do_video_ioctl(struct file * case VIDIOC_STREAMOFF: case VIDIOC_S_INPUT: case VIDIOC_S_OUTPUT: - err = get_user(karg.vi, (s32 __user *)up); + err = alloc_userspace(sizeof(unsigned int), 0, &up_native); + if (!err && assign_in_user((unsigned int __user *)up_native, + (compat_uint_t __user *)up)) + err = -EFAULT; compatible_arg = 0; break;
case VIDIOC_G_INPUT: case VIDIOC_G_OUTPUT: + err = alloc_userspace(sizeof(unsigned int), 0, &up_native); compatible_arg = 0; break;
case VIDIOC_G_EDID: case VIDIOC_S_EDID: - err = get_v4l2_edid32(&karg.v2edid, up); + err = alloc_userspace(sizeof(struct v4l2_edid), 0, &up_native); + if (!err) + err = get_v4l2_edid32(up_native, up); compatible_arg = 0; break;
case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: - err = get_v4l2_format32(&karg.v2f, up); + err = bufsize_v4l2_format(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_format), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_format); + err = get_v4l2_format32(up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break;
case VIDIOC_CREATE_BUFS: - err = get_v4l2_create32(&karg.v2crt, up); + err = bufsize_v4l2_create(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_create_buffers), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_create_buffers); + err = get_v4l2_create32(up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break;
@@ -910,36 +1103,63 @@ static long do_video_ioctl(struct file * case VIDIOC_QUERYBUF: case VIDIOC_QBUF: case VIDIOC_DQBUF: - err = get_v4l2_buffer32(&karg.v2b, up); + err = bufsize_v4l2_buffer(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_buffer), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_buffer); + err = get_v4l2_buffer32(up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break;
case VIDIOC_S_FBUF: - err = get_v4l2_framebuffer32(&karg.v2fb, up); + err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0, + &up_native); + if (!err) + err = get_v4l2_framebuffer32(up_native, up); compatible_arg = 0; break;
case VIDIOC_G_FBUF: + err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0, + &up_native); compatible_arg = 0; break;
case VIDIOC_ENUMSTD: - err = get_v4l2_standard32(&karg.v2s, up); + err = alloc_userspace(sizeof(struct v4l2_standard), 0, + &up_native); + if (!err) + err = get_v4l2_standard32(up_native, up); compatible_arg = 0; break;
case VIDIOC_ENUMINPUT: - err = get_v4l2_input32(&karg.v2i, up); + err = alloc_userspace(sizeof(struct v4l2_input), 0, &up_native); + if (!err) + err = get_v4l2_input32(up_native, up); compatible_arg = 0; break;
case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - err = get_v4l2_ext_controls32(file, &karg.v2ecs, up); + err = bufsize_v4l2_ext_controls(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_ext_controls), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_ext_controls); + err = get_v4l2_ext_controls32(file, up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break; case VIDIOC_DQEVENT: + err = alloc_userspace(sizeof(struct v4l2_event), 0, &up_native); compatible_arg = 0; break; } @@ -948,25 +1168,26 @@ static long do_video_ioctl(struct file *
if (compatible_arg) err = native_ioctl(file, cmd, (unsigned long)up); - else { - mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); - err = native_ioctl(file, cmd, (unsigned long)&karg); - set_fs(old_fs); - } + else + err = native_ioctl(file, cmd, (unsigned long)up_native);
if (err == -ENOTTY) return err;
- /* Special case: even after an error we need to put the - results back for these ioctls since the error_idx will - contain information on which control failed. */ + /* + * Special case: even after an error we need to put the + * results back for these ioctls since the error_idx will + * contain information on which control failed. + */ switch (cmd) { case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - if (put_v4l2_ext_controls32(file, &karg.v2ecs, up)) + if (put_v4l2_ext_controls32(file, up_native, up)) + err = -EFAULT; + break; + case VIDIOC_S_EDID: + if (put_v4l2_edid32(up_native, up)) err = -EFAULT; break; } @@ -978,45 +1199,46 @@ static long do_video_ioctl(struct file * case VIDIOC_S_OUTPUT: case VIDIOC_G_INPUT: case VIDIOC_G_OUTPUT: - err = put_user(((s32)karg.vi), (s32 __user *)up); + if (assign_in_user((compat_uint_t __user *)up, + ((unsigned int __user *)up_native))) + err = -EFAULT; break;
case VIDIOC_G_FBUF: - err = put_v4l2_framebuffer32(&karg.v2fb, up); + err = put_v4l2_framebuffer32(up_native, up); break;
case VIDIOC_DQEVENT: - err = put_v4l2_event32(&karg.v2ev, up); + err = put_v4l2_event32(up_native, up); break;
case VIDIOC_G_EDID: - case VIDIOC_S_EDID: - err = put_v4l2_edid32(&karg.v2edid, up); + err = put_v4l2_edid32(up_native, up); break;
case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: - err = put_v4l2_format32(&karg.v2f, up); + err = put_v4l2_format32(up_native, up); break;
case VIDIOC_CREATE_BUFS: - err = put_v4l2_create32(&karg.v2crt, up); + err = put_v4l2_create32(up_native, up); break;
case VIDIOC_PREPARE_BUF: case VIDIOC_QUERYBUF: case VIDIOC_QBUF: case VIDIOC_DQBUF: - err = put_v4l2_buffer32(&karg.v2b, up); + err = put_v4l2_buffer32(up_native, up); break;
case VIDIOC_ENUMSTD: - err = put_v4l2_standard32(&karg.v2s, up); + err = put_v4l2_standard32(up_native, up); break;
case VIDIOC_ENUMINPUT: - err = put_v4l2_input32(&karg.v2i, up); + err = put_v4l2_input32(up_native, up); break; } return err;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Zyngier marc.zyngier@arm.com
commit 20e8175d246e9f9deb377f2784b3e7dfb2ad3e86 upstream.
KVM doesn't follow the SMCCC when it comes to unimplemented calls, and inject an UNDEF instead of returning an error. Since firmware calls are now used for security mitigation, they are becoming more common, and the undef is counter productive.
Instead, let's follow the SMCCC which states that -1 must be returned to the caller when getting an unknown function number.
Tested-by: Ard Biesheuvel ard.biesheuvel@linaro.org Signed-off-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/arm/kvm/handle_exit.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
--- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -45,7 +45,7 @@ static int handle_hvc(struct kvm_vcpu *v
ret = kvm_psci_call(vcpu); if (ret < 0) { - kvm_inject_undefined(vcpu); + vcpu_set_reg(vcpu, 0, ~0UL); return 1; }
@@ -54,7 +54,16 @@ static int handle_hvc(struct kvm_vcpu *v
static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) { - kvm_inject_undefined(vcpu); + /* + * "If an SMC instruction executed at Non-secure EL1 is + * trapped to EL2 because HCR_EL2.TSC is 1, the exception is a + * Trap exception, not a Secure Monitor Call exception [...]" + * + * We need to advance the PC after the trap, as it would + * otherwise return to the same address... + */ + vcpu_set_reg(vcpu, 0, ~0UL); + kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); return 1; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Kaiser martin@kaiser.cx
commit 0be267255cef64e1c58475baa7b25568355a3816 upstream.
When the watchdog device is suspended, its timeout is set to the maximum value. During resume, the previously set timeout should be restored. This does not work at the moment.
The suspend function calls
imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
and resume reverts this by calling
imx2_wdt_set_timeout(wdog, wdog->timeout);
However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore, wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume function.
Fix this by adding a new function __imx2_wdt_set_timeout() which only updates the hardware settings. imx2_wdt_set_timeout() now calls __imx2_wdt_set_timeout() and then saves the new timeout to wdog->timeout.
During suspend, we call __imx2_wdt_set_timeout() directly so that wdog->timeout won't be updated and we can restore the previous value during resume. This approach makes wdog->timeout different from the actual setting in the hardware which is usually not a good thing. However, the two differ only while we're suspended and no kernel code is running, so it should be ok in this case.
Signed-off-by: Martin Kaiser martin@kaiser.cx Reviewed-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@iguana.be Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/watchdog/imx2_wdt.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
--- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -161,15 +161,21 @@ static void imx2_wdt_timer_ping(unsigned mod_timer(&wdev->timer, jiffies + wdog->timeout * HZ / 2); }
-static int imx2_wdt_set_timeout(struct watchdog_device *wdog, - unsigned int new_timeout) +static void __imx2_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) { struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
- wdog->timeout = new_timeout; - regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT, WDOG_SEC_TO_COUNT(new_timeout)); +} + +static int imx2_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) +{ + __imx2_wdt_set_timeout(wdog, new_timeout); + + wdog->timeout = new_timeout; return 0; }
@@ -353,7 +359,11 @@ static int imx2_wdt_suspend(struct devic
/* The watchdog IP block is running */ if (imx2_wdt_is_running(wdev)) { - imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); + /* + * Don't update wdog->timeout, we'll restore the current value + * during resume. + */ + __imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); imx2_wdt_ping(wdog);
/* The watchdog is not active */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab mchehab@s-opensource.com
commit 81742be14b6a90c9fd0ff6eb4218bdf696ad8e46 upstream.
Before this patch, when compiled for arm32, the signal strength were reported as:
Lock (0x1f) Signal= 4294908.66dBm C/N= 12.79dB
Because of a 32 bit integer overflow. After it, it is properly reported as:
Lock (0x1f) Signal= -58.64dBm C/N= 12.79dB
Fixes: 0f91c9d6bab9 ("[media] TS2020: Calculate tuner gain correctly") Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/media/dvb-frontends/ts2020.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/dvb-frontends/ts2020.c +++ b/drivers/media/dvb-frontends/ts2020.c @@ -369,7 +369,7 @@ static int ts2020_read_tuner_gain(struct gain2 = clamp_t(long, gain2, 0, 13); v_agc = clamp_t(long, v_agc, 400, 1100);
- *_gain = -(gain1 * 2330 + + *_gain = -((__s64)gain1 * 2330 + gain2 * 3500 + v_agc * 24 / 10 * 10 + 10000); @@ -387,7 +387,7 @@ static int ts2020_read_tuner_gain(struct gain3 = clamp_t(long, gain3, 0, 6); v_agc = clamp_t(long, v_agc, 600, 1600);
- *_gain = -(gain1 * 2650 + + *_gain = -((__s64)gain1 * 2650 + gain2 * 3380 + gain3 * 2850 + v_agc * 176 / 100 * 10 -
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab mchehab@osg.samsung.com
commit 9893b905e743ded332575ca04486bd586c0772f7 upstream.
The XC2028_I2C_FLUSH only needs to be implemented on a few devices. Others can safely ignore it.
That prevents filling the dmesg with lots of messages like:
dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0
Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback") Reported-by: Enrico Mioso mrkiko.rs@gmail.com Signed-off-by: Mauro Carvalho Chehab mchehab@osg.samsung.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/media/usb/dvb-usb/cxusb.c | 2 ++ drivers/media/usb/dvb-usb/dib0700_devices.c | 1 + 2 files changed, 3 insertions(+)
--- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -818,6 +818,8 @@ static int dvico_bluebird_xc2028_callbac case XC2028_RESET_CLK: deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); break; + case XC2028_I2C_FLUSH: + break; default: deb_info("%s: unknown command %d, arg %d\n", __func__, command, arg); --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -431,6 +431,7 @@ static int stk7700ph_xc3028_callback(voi state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); break; case XC2028_RESET_CLK: + case XC2028_I2C_FLUSH: break; default: err("%s: unknown command %d, arg %d\n", __func__,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rasmus Villemoes linux@rasmusvillemoes.dk
commit 4f7e988e63e336827f4150de48163bed05d653bd upstream.
This reverts commit 92266d6ef60c ("async: simplify lowest_in_progress()") which was simply wrong: In the case where domain is NULL, we now use the wrong offsetof() in the list_first_entry macro, so we don't actually fetch the ->cookie value, but rather the eight bytes located sizeof(struct list_head) further into the struct async_entry.
On 64 bit, that's the data member, while on 32 bit, that's a u64 built from func and data in some order.
I think the bug happens to be harmless in practice: It obviously only affects callers which pass a NULL domain, and AFAICT the only such caller is
async_synchronize_full() -> async_synchronize_full_domain(NULL) -> async_synchronize_cookie_domain(ASYNC_COOKIE_MAX, NULL)
and the ASYNC_COOKIE_MAX means that in practice we end up waiting for the async_global_pending list to be empty - but it would break if somebody happened to pass (void*)-1 as the data element to async_schedule, and of course also if somebody ever does a async_synchronize_cookie_domain(, NULL) with a "finite" cookie value.
Maybe the "harmless in practice" means this isn't -stable material. But I'm not completely confident my quick git grep'ing is enough, and there might be affected code in one of the earlier kernels that has since been removed, so I'll leave the decision to the stable guys.
Link: http://lkml.kernel.org/r/20171128104938.3921-1-linux@rasmusvillemoes.dk Fixes: 92266d6ef60c "async: simplify lowest_in_progress()" Signed-off-by: Rasmus Villemoes linux@rasmusvillemoes.dk Acked-by: Tejun Heo tj@kernel.org Cc: Arjan van de Ven arjan@linux.intel.com Cc: Adam Wallis awallis@codeaurora.org Cc: Lai Jiangshan laijs@cn.fujitsu.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/async.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
--- a/kernel/async.c +++ b/kernel/async.c @@ -84,20 +84,24 @@ static atomic_t entry_count;
static async_cookie_t lowest_in_progress(struct async_domain *domain) { - struct list_head *pending; + struct async_entry *first = NULL; async_cookie_t ret = ASYNC_COOKIE_MAX; unsigned long flags;
spin_lock_irqsave(&async_lock, flags);
- if (domain) - pending = &domain->pending; - else - pending = &async_global_pending; + if (domain) { + if (!list_empty(&domain->pending)) + first = list_first_entry(&domain->pending, + struct async_entry, domain_list); + } else { + if (!list_empty(&async_global_pending)) + first = list_first_entry(&async_global_pending, + struct async_entry, global_list); + }
- if (!list_empty(pending)) - ret = list_first_entry(pending, struct async_entry, - domain_list)->cookie; + if (first) + ret = first->cookie;
spin_unlock_irqrestore(&async_lock, flags); return ret;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit edfc3722cfef4217c7fe92b272cbe0288ba1ff57 upstream.
The Toshiba Click Mini uses an i2c attached keyboard/touchpad combo (single i2c_hid device for both) which has a vid:pid of 04F3:0401, which is also used by a bunch of Elan touchpads which are handled by the drivers/input/mouse/elan_i2c driver, but that driver deals with pure touchpads and does not work for a combo device such as the one on the Toshiba Click Mini.
The combo on the Mini has an ACPI id of ELAN0800, which is not claimed by the elan_i2c driver, so check for that and if it is found do not ignore the device. This fixes the keyboard/touchpad combo on the Mini not working (although with the touchpad in mouse emulation mode).
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/hid/hid-core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
--- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2308,7 +2308,6 @@ static const struct hid_device_id hid_ig { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) }, { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x000a) }, { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0400) }, - { HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, 0x0401) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) }, { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) }, @@ -2578,6 +2577,17 @@ bool hid_ignore(struct hid_device *hdev) strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0) return true; break; + case USB_VENDOR_ID_ELAN: + /* + * Many Elan devices have a product id of 0x0401 and are handled + * by the elan_i2c input driver. But the ACPI HID ELAN0800 dev + * is not (and cannot be) handled by that driver -> + * Ignore all 0x0401 devs except for the ELAN0800 dev. + */ + if (hdev->product == 0x0401 && + strncmp(hdev->name, "ELAN0800", 8) != 0) + return true; + break; }
if (hdev->type == HID_TYPE_USBMOUSE &&
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit b4cdaba274247c9c841c6a682c08fa91fb3aa549 upstream.
BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT) use an UART connection for bluetooth. But they also advertise btsdio support on their 3th sdio function, this causes 2 problems:
1) A non functioning BT HCI getting registered
2) Since the btsdio driver does not have suspend/resume callbacks, mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify() to react as if the SDIO-card is removed and since the slot is marked as non-removable it will never get detected as inserted again. Which results in wifi no longer working after a suspend/resume.
This commit fixes both by making btsdio ignore BCM43341 devices when connected to a slot which is marked non-removable.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/bluetooth/btsdio.c | 9 +++++++++ 1 file changed, 9 insertions(+)
--- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -31,6 +31,7 @@ #include <linux/errno.h> #include <linux/skbuff.h>
+#include <linux/mmc/host.h> #include <linux/mmc/sdio_ids.h> #include <linux/mmc/sdio_func.h>
@@ -291,6 +292,14 @@ static int btsdio_probe(struct sdio_func tuple = tuple->next; }
+ /* BCM43341 devices soldered onto the PCB (non-removable) use an + * uart connection for bluetooth, ignore the BT SDIO interface. + */ + if (func->vendor == SDIO_VENDOR_ID_BROADCOM && + func->device == SDIO_DEVICE_ID_BROADCOM_43341 && + !mmc_card_is_removable(func->card->host)) + return -ENODEV; + data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng kai.heng.feng@canonical.com
commit 7d06d5895c159f64c46560dc258e553ad8670fe0 upstream.
This reverts commit fd865802c66bc451dc515ed89360f84376ce1a56.
This commit causes a regression on some QCA ROME chips. The USB device reset happens in btusb_open(), hence firmware loading gets interrupted.
Furthermore, this commit stops working after commit ("a0085f2510e8976614ad8f766b209448b385492f Bluetooth: btusb: driver to enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in btusb_suspend() when it's not a wakeup source.
If we really want to reset the USB device, we need to do it before btusb_open(). Let's handle it in drivers/usb/core/quirks.c.
Cc: Leif Liddy leif.linux@gmail.com Cc: Matthias Kaehlcke mka@chromium.org Cc: Brian Norris briannorris@chromium.org Cc: Daniel Drake drake@endlessm.com Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Reviewed-by: Brian Norris briannorris@chromium.org Tested-by: Brian Norris briannorris@chromium.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/bluetooth/btusb.c | 6 ------ 1 file changed, 6 deletions(-)
--- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2969,12 +2969,6 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; - - /* QCA Rome devices lose their updated firmware over suspend, - * but the USB hub doesn't notice any status change. - * Explicitly request a device reset on resume. - */ - set_bit(BTUSB_RESET_RESUME, &data->flags); }
#ifdef CONFIG_BT_HCIBTUSB_RTL
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit 61f5acea8737d9b717fcc22bb6679924f3c82b98 upstream.
Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices, instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c.
This was done because the DIY BTUSB_RESET_RESUME reset-resume handling has several issues (see the original commit message). An added advantage of moving over to the USB-core reset-resume handling is that it also disables autosuspend for these devices, which is similarly broken on these.
But there are 2 issues with this approach: 1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek devices. 2) Sofar only 2 of the 10 QCA devices known to the btusb code have been added to usb/core/quirks.c and if we fix the Realtek case the same way we need to add an additional 14 entries. So in essence we need to duplicate a large part of the usb_device_id table in btusb.c in usb/core/quirks.c and manually keep them in sync.
This commit instead restores setting a reset-resume quirk for QCA devices in the btusb.c code, avoiding the duplicate usb_device_id table problem.
This commit avoids the problems with the original DIY BTUSB_RESET_RESUME code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the usb_device.
This commit also moves the BTUSB_REALTEK case over to directly setting the USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused BTUSB_RESET_RESUME code.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") Cc: Leif Liddy leif.linux@gmail.com Cc: Matthias Kaehlcke mka@chromium.org Cc: Brian Norris briannorris@chromium.org Cc: Daniel Drake drake@endlessm.com Cc: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/bluetooth/btusb.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
--- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -23,6 +23,7 @@
#include <linux/module.h> #include <linux/usb.h> +#include <linux/usb/quirks.h> #include <linux/firmware.h> #include <asm/unaligned.h>
@@ -360,8 +361,8 @@ static const struct usb_device_id blackl #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 -#define BTUSB_RESET_RESUME 10 -#define BTUSB_DIAG_RUNNING 11 +#define BTUSB_DIAG_RUNNING 10 +#define BTUSB_OOB_WAKE_ENABLED 11
struct btusb_data { struct hci_dev *hdev; @@ -2969,6 +2970,12 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + + /* QCA Rome devices lose their updated firmware over suspend, + * but the USB hub doesn't notice any status change. + * explicitly request a device reset on resume. + */ + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; }
#ifdef CONFIG_BT_HCIBTUSB_RTL @@ -2979,7 +2986,7 @@ static int btusb_probe(struct usb_interf * but the USB hub doesn't notice any status change. * Explicitly request a device reset on resume. */ - set_bit(BTUSB_RESET_RESUME, &data->flags); + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #endif
@@ -3136,14 +3143,6 @@ static int btusb_suspend(struct usb_inte btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor);
- /* Optionally request a device reset on resume, but only when - * wakeups are disabled. If wakeups are enabled we assume the - * device will stay powered up throughout suspend. - */ - if (test_bit(BTUSB_RESET_RESUME, &data->flags) && - !device_may_wakeup(&data->udev->dev)) - data->udev->reset_resume = 1; - return 0; }
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Brian
From: Hans de Goede hdegoede@redhat.com
commit 61f5acea8737d9b717fcc22bb6679924f3c82b98 upstream.
Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices, instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c.
This was done because the DIY BTUSB_RESET_RESUME reset-resume handling has several issues (see the original commit message). An added advantage of moving over to the USB-core reset-resume handling is that it also disables autosuspend for these devices, which is similarly broken on these.
But there are 2 issues with this approach:
- It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek devices.
- Sofar only 2 of the 10 QCA devices known to the btusb code have been added to usb/core/quirks.c and if we fix the Realtek case the same way we need to add an additional 14 entries. So in essence we need to duplicate a large part of the usb_device_id table in btusb.c in usb/core/quirks.c and manually keep them in sync.
This commit instead restores setting a reset-resume quirk for QCA devices in the btusb.c code, avoiding the duplicate usb_device_id table problem.
This commit avoids the problems with the original DIY BTUSB_RESET_RESUME code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the usb_device.
This commit also moves the BTUSB_REALTEK case over to directly setting the USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused BTUSB_RESET_RESUME code.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") Cc: Leif Liddy leif.linux@gmail.com Cc: Matthias Kaehlcke mka@chromium.org Cc: Brian Norris briannorris@chromium.org Cc: Daniel Drake drake@endlessm.com Cc: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
drivers/bluetooth/btusb.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
--- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/usb.h> +#include <linux/usb/quirks.h> #include <linux/firmware.h> #include <asm/unaligned.h> @@ -360,8 +361,8 @@ static const struct usb_device_id blackl #define BTUSB_FIRMWARE_LOADED 7 #define BTUSB_FIRMWARE_FAILED 8 #define BTUSB_BOOTING 9 -#define BTUSB_RESET_RESUME 10 -#define BTUSB_DIAG_RUNNING 11 +#define BTUSB_DIAG_RUNNING 10 +#define BTUSB_OOB_WAKE_ENABLED 11 struct btusb_data { struct hci_dev *hdev; @@ -2969,6 +2970,12 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
/* QCA Rome devices lose their updated firmware over suspend,
* but the USB hub doesn't notice any status change.
* explicitly request a device reset on resume.
*/
}interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
#ifdef CONFIG_BT_HCIBTUSB_RTL @@ -2979,7 +2986,7 @@ static int btusb_probe(struct usb_interf * but the USB hub doesn't notice any status change. * Explicitly request a device reset on resume. */
set_bit(BTUSB_RESET_RESUME, &data->flags);
}interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
#endif @@ -3136,14 +3143,6 @@ static int btusb_suspend(struct usb_inte btusb_stop_traffic(data); usb_kill_anchored_urbs(&data->tx_anchor);
- /* Optionally request a device reset on resume, but only when
* wakeups are disabled. If wakeups are enabled we assume the
* device will stay powered up throughout suspend.
*/
- if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
!device_may_wakeup(&data->udev->dev))
data->udev->reset_resume = 1;
- return 0;
}
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
thanks,
greg k-h
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
The link is the original patch, where I'm (too late?) complaining about its side effects. Hans and Marcel are discussing potential alternatives. This stuff happens in -rc kernels. But you're already ready to push it out to -stable users? I can try to push another few reverts into Linus's tree if that really helps, or else you can wait on pushing these to -stable until 4.16 settles down.
Or you can ignore my objection. But I don't really like that option ;)
Brian
On Fri, Feb 16, 2018 at 10:10:44AM -0800, Brian Norris wrote:
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
The link is the original patch, where I'm (too late?) complaining about its side effects. Hans and Marcel are discussing potential alternatives. This stuff happens in -rc kernels. But you're already ready to push it out to -stable users? I can try to push another few reverts into Linus's tree if that really helps, or else you can wait on pushing these to -stable until 4.16 settles down.
FWIW, here are the various commit SHAs.
Upstream: 61f5acea8737 v4.15 (queued for v4.15.4): e766a2d7f7c2 v4.14 (queued for v4.14.20): 736385472dfa v4.9 (queued for v4.9.82): 1c6fc2167678 v4.4 (queued for v4.4.116): 575538a5371d
I didn't check older stable kernels.
Guenter
On Fri, Feb 16, 2018 at 10:52:20AM -0800, Guenter Roeck wrote:
On Fri, Feb 16, 2018 at 10:10:44AM -0800, Brian Norris wrote:
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
The link is the original patch, where I'm (too late?) complaining about its side effects. Hans and Marcel are discussing potential alternatives. This stuff happens in -rc kernels. But you're already ready to push it out to -stable users? I can try to push another few reverts into Linus's tree if that really helps, or else you can wait on pushing these to -stable until 4.16 settles down.
FWIW, here are the various commit SHAs.
Upstream: 61f5acea8737 v4.15 (queued for v4.15.4): e766a2d7f7c2 v4.14 (queued for v4.14.20): 736385472dfa v4.9 (queued for v4.9.82): 1c6fc2167678 v4.4 (queued for v4.4.116): 575538a5371d
I didn't check older stable kernels.
Thanks, but I've now released all of these with this patch committed, so we are now "bug compatible" :)
Please work to get this resolved in Linus's tree and I will be glad to backport the result.
thanks,
greg k-h
On 02/17/2018 05:43 AM, Greg Kroah-Hartman wrote:
On Fri, Feb 16, 2018 at 10:52:20AM -0800, Guenter Roeck wrote:
On Fri, Feb 16, 2018 at 10:10:44AM -0800, Brian Norris wrote:
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
The link is the original patch, where I'm (too late?) complaining about its side effects. Hans and Marcel are discussing potential alternatives. This stuff happens in -rc kernels. But you're already ready to push it out to -stable users? I can try to push another few reverts into Linus's tree if that really helps, or else you can wait on pushing these to -stable until 4.16 settles down.
FWIW, here are the various commit SHAs.
Upstream: 61f5acea8737 v4.15 (queued for v4.15.4): e766a2d7f7c2 v4.14 (queued for v4.14.20): 736385472dfa v4.9 (queued for v4.9.82): 1c6fc2167678 v4.4 (queued for v4.4.116): 575538a5371d
I didn't check older stable kernels.
Thanks, but I've now released all of these with this patch committed, so we are now "bug compatible" :)
FWIW, seems to me that trying to be "bug compatible" with -rc1 upstream kernels may not really be a good idea for stable releases.
Guenter
On Sat, Feb 17, 2018 at 07:12:17AM -0800, Guenter Roeck wrote:
On 02/17/2018 05:43 AM, Greg Kroah-Hartman wrote:
On Fri, Feb 16, 2018 at 10:52:20AM -0800, Guenter Roeck wrote:
On Fri, Feb 16, 2018 at 10:10:44AM -0800, Brian Norris wrote:
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote: > 4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
The link is the original patch, where I'm (too late?) complaining about its side effects. Hans and Marcel are discussing potential alternatives. This stuff happens in -rc kernels. But you're already ready to push it out to -stable users? I can try to push another few reverts into Linus's tree if that really helps, or else you can wait on pushing these to -stable until 4.16 settles down.
FWIW, here are the various commit SHAs.
Upstream: 61f5acea8737 v4.15 (queued for v4.15.4): e766a2d7f7c2 v4.14 (queued for v4.14.20): 736385472dfa v4.9 (queued for v4.9.82): 1c6fc2167678 v4.4 (queued for v4.4.116): 575538a5371d
I didn't check older stable kernels.
Thanks, but I've now released all of these with this patch committed, so we are now "bug compatible" :)
FWIW, seems to me that trying to be "bug compatible" with -rc1 upstream kernels may not really be a good idea for stable releases.
It's a tough trade-off. If I dropped this patch, the normal mode of operation would be for it to get merged into device kernels and then forgotten about. Only if/when the user with the problem moves to a newer release a long time later would the regression normally appear again, and everyone would have to remember what happened and try to piece it all together again as to what commit caused the issue.
By you adding the revert to your device kernel now, you have a record of this being a problem, how upstream isn't fixing the issue, and when/if you do move to a newer kernel, that bugfix will still be there in your patch stack to forward port.
Yeah, you all are normally better than that, and I trust that you will push to get this resolved, hopefully soon. But for the most part, this method works best overall for the majority of the cases like this as not all bug reporters are persistent, and if not, the maintainer usually forgets about it as no one is saying anything and they have other things to work on.
Well, bluetooth is known to not have responsive maintainers, so who am I kidding here, odds are it's only going to get fixed as Hans is involved, despite the bluetooth maintainers :)
thanks,
greg k-h
Hi Greg,
On Sat, Feb 17, 2018 at 7:24 AM, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
On Sat, Feb 17, 2018 at 07:12:17AM -0800, Guenter Roeck wrote:
On 02/17/2018 05:43 AM, Greg Kroah-Hartman wrote:
On Fri, Feb 16, 2018 at 10:52:20AM -0800, Guenter Roeck wrote:
On Fri, Feb 16, 2018 at 10:10:44AM -0800, Brian Norris wrote:
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote: > On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote: > > 4.4-stable review patch. If anyone has any objections, please let me know. > > Consider this an objection: > > I'm currently arguing that this is unnecessarily regressing power > consumption here: > > https://patchwork.kernel.org/patch/10149195/ > > I'll leave it up to you what to do with this, but if this ends up in > Chromium OS kernels, I'm likely to revert it there...
...
Thanks, but I've now released all of these with this patch committed, so we are now "bug compatible" :)
So, is that to say that the boilerplate above about objections is meaningless? This is the second time that this same "feature" has been pushed (degrading the quality of my systems) despite my objections, under the banner of "bug compatibility" [1]. The first attempt to revert was back around Dec 20 of last year, but I see that there were 10 "stable" 4.4 kernels released in the meantime [2] where that original bug was still present. (Commit fd865802c66b "Bluetooth: btusb: fix QCA Rome suspend/resume" was proven undeniably buggy.)
Next: we see this current valiant attempt at a less buggy fix, by Hans. It's an OK solution, but it still wastes power for me. I objected above, but instead of delaying applying it, you applied it in the same release as you finally fixed the original crap (v4.4.116). So all-in-all, my system (if using 4.4.x directly) hasn't had decent Bluetooth since v4.4.99.
At least things are still moving forward here, and maybe in another month, I can expect a v4.4.x stable kernel that works well. But the hilarious current state of things is that we're basically going back to a no-op for the time being:
https://marc.info/?l=linux-bluetooth&m=151981547905651&w=2 https://marc.info/?l=linux-bluetooth&m=151981548105654&w=2 [PATCH] Bluetooth: btusb: Remove Yoga 920 from the btusb_needs_reset_resume_table
(I know others are looking at properly identifying a DMI match list still, so this won't stay a no-op.)
FWIW, seems to me that trying to be "bug compatible" with -rc1 upstream kernels may not really be a good idea for stable releases.
I couldn't agree more.
It's a tough trade-off. If I dropped this patch, the normal mode of operation would be for it to get merged into device kernels and then forgotten about. Only if/when the user with the problem moves to a newer release a long time later would the regression normally appear again, and everyone would have to remember what happened and try to piece it all together again as to what commit caused the issue.
Note that I didn't suggest we have to completely drop the patch. And I also don't suspect you need to delay all -rc1 bugfixes. I'd just suggest delaying the patch for a few weeks, when there are objections raised. (Or, reverting and scheduling to re-queue in a few weeks if no progress...or something like that.) Is that not something that could work, in order to keep "stable" releases *actually* stable? In most software release processes, buggy patches are reverted as quickly as possible while alternatives are worked out. Not all fixes are security fixes that need to be out the door as soon as they see the light of day...
By you adding the revert to your device kernel now, you have a record of this being a problem, how upstream isn't fixing the issue, and when/if you do move to a newer kernel, that bugfix will still be there in your patch stack to forward port.
So, you rely entirely on device kernels to manage the pain that your release process causes? We're actively trying to stay much closer to upstream these days, and would essentially like to eliminate the concept of "device" kernels, at least for Chrom{e,ium} OS, if possible. But it's crap like this that proves that we can't.
Yeah, you all are normally better than that, and I trust that you will push to get this resolved, hopefully soon. But for the most part, this method works best overall for the majority of the cases like this as not all bug reporters are persistent, and if not, the maintainer usually forgets about it as no one is saying anything and they have other things to work on.
Well, bluetooth is known to not have responsive maintainers, so who am I kidding here, odds are it's only going to get fixed as Hans is involved, despite the bluetooth maintainers :)
You can't pin this completely on the bluetooth maintainers. *You* maintain the -stable trees, yet you effectively ignored both of my objections, forcing me to rely on said original maintainers to queue up alternatives. Yes, yes, I know the "forcing me [and/or Hans] to work" is basically working as intended for you, but the hard facts show that *your* release was broken for far too long.
Brian
[1] BTW, I've had multiple people laugh at me when I mentioned this phrase in explaining our predicament to people. [2] v4.4.108 to v4.4.116
On Wed, Feb 28, 2018 at 11:39:56AM -0800, Brian Norris wrote:
Hi Greg,
Hi,
Sorry for the delay, wanted to think about this one for a while...
...
Thanks, but I've now released all of these with this patch committed, so we are now "bug compatible" :)
So, is that to say that the boilerplate above about objections is meaningless? This is the second time that this same "feature" has been pushed (degrading the quality of my systems) despite my objections, under the banner of "bug compatibility" [1]. The first attempt to revert was back around Dec 20 of last year, but I see that there were 10 "stable" 4.4 kernels released in the meantime [2] where that original bug was still present. (Commit fd865802c66b "Bluetooth: btusb: fix QCA Rome suspend/resume" was proven undeniably buggy.)
Sorry, I know you were frustrated, but for some subsystems/minor devices like this, regressions happen and getting them fixed properly can take a few weeks.
And yes, something doesn't feel "minor" when it affects your devices but really you have the control here to revert the change on your side (more on that below...)
Next: we see this current valiant attempt at a less buggy fix, by Hans. It's an OK solution, but it still wastes power for me. I objected above, but instead of delaying applying it, you applied it in the same release as you finally fixed the original crap (v4.4.116). So all-in-all, my system (if using 4.4.x directly) hasn't had decent Bluetooth since v4.4.99.
I'm amazed bluetooth works at all at times, given the mess of the hardware involved, and the horrid spec and all of the intermediate pieces. Luckily 4.15+ seems really good for me now, but I know you can't upgrade :)
That being said, some subsystems have problems with stuff like this due to crazy hardware that one fix breaks another and the like. There is also the issue of maintainers that don't work on the subsystem "full" or even "part" time. From my side, I submitted a known-security-bugfix and it was ignored by the bluetooth maintainers for weeks, so I had to route around them and push it directly to Linus just to get it fixed. So I feel your pain, but we are dealing with people with different priorities, none of which we directly control, so we have to handle it the best we can.
In the end, it's amazing any of this works at all, but it does, it just sometimes takes longer than we all like :)
It's a tough trade-off. If I dropped this patch, the normal mode of operation would be for it to get merged into device kernels and then forgotten about. Only if/when the user with the problem moves to a newer release a long time later would the regression normally appear again, and everyone would have to remember what happened and try to piece it all together again as to what commit caused the issue.
Note that I didn't suggest we have to completely drop the patch. And I also don't suspect you need to delay all -rc1 bugfixes. I'd just suggest delaying the patch for a few weeks, when there are objections raised. (Or, reverting and scheduling to re-queue in a few weeks if no progress...or something like that.) Is that not something that could work, in order to keep "stable" releases *actually* stable? In most software release processes, buggy patches are reverted as quickly as possible while alternatives are worked out. Not all fixes are security fixes that need to be out the door as soon as they see the light of day...
Having the "bug compatible" stable kernels is controversial. And I don't always follow that rule, depending on the subsystem/bug involved (see a recent btrfs bug for one such example.) That being said, I have found that it is the best thing to do overall, as it provides the needed pressure on the developer/maintainer/user to get the bug fixed and pushed to Linus as soon as possible.
And in the meantime, if you, as a user, knows the patch in problem, you can always revert it on your own. We all have local patches, you more than me, but that's just part of dealing with open source projects. Not a big deal at all, add the revert to your stack, when the bug gets fixed you drop your patch and all is good/fine.
If you aren't using tools to make this easier, well that can be fixed (I strongly recommend quilt, not git, to work with a device kernel, but that's another long rant/email for another time...)
By you adding the revert to your device kernel now, you have a record of this being a problem, how upstream isn't fixing the issue, and when/if you do move to a newer kernel, that bugfix will still be there in your patch stack to forward port.
So, you rely entirely on device kernels to manage the pain that your release process causes? We're actively trying to stay much closer to upstream these days, and would essentially like to eliminate the concept of "device" kernels, at least for Chrom{e,ium} OS, if possible. But it's crap like this that proves that we can't.
Oh come on, you all have _thousands_ of graphic driver patches in your tree on top of mainline. Dealing with 2-4 device-specific patches is a total drop in the bucket.
Yes, it takes testing and finding the problem, but look at the benifit! You are getting 10 patches a day that are currated and hopefully tested and maintained by the community. If you only have 1 failure a week, your odds are still way in your favor of having more bugs fixed (security and otherwise) than if you ignored the stable patches entirely.
And that't the point to drive home here. If you stay away from updating to stable patches, you have a huge boatload of KNOWN SECURITY HOLES in your product. If you take them, you have the _possiblity_ of some bugs added, but overall, the rate is _VERY_ small. Guenter has numbers of 2-4 patches per year cause problems. That's lower than ANY other development model I have ever seen anywhere.
So, stick with known buggy/insecure devices? Or take the updates and handle the 1-2 problems a year they provide you. I think the cost-analysis is easy to make here :)
And don't try to say "I'll just cherry-pick the security patches." It never works. I have audited a ton of device kernels, from loads of companies that say they know what they are doing. All of them were full of holes and missed obvious bugs. As proof of that, I can get root and/or crash almost every single major Android device on the market right now due to them not taking updated kernels. It's a sad state, and one that I am working with the OEMs and Google to resolve.
Yeah, you all are normally better than that, and I trust that you will push to get this resolved, hopefully soon. But for the most part, this method works best overall for the majority of the cases like this as not all bug reporters are persistent, and if not, the maintainer usually forgets about it as no one is saying anything and they have other things to work on.
Well, bluetooth is known to not have responsive maintainers, so who am I kidding here, odds are it's only going to get fixed as Hans is involved, despite the bluetooth maintainers :)
You can't pin this completely on the bluetooth maintainers. *You* maintain the -stable trees, yet you effectively ignored both of my objections, forcing me to rely on said original maintainers to queue up alternatives. Yes, yes, I know the "forcing me [and/or Hans] to work" is basically working as intended for you, but the hard facts show that *your* release was broken for far too long.
That's fine, it's my _job_ to push back on the maintainers here, as they are the ones that are doing the wrong thing, I'm not going to do their job, just like they aren't going to do mine.
And I don't scale, they do, as they only have to maintain a single subsystem, I have the whole stable tree to worry about.
And again, just revert and move on, I think we have taken more time with these emails about the whole process than it would have taken to do this on your side :)
[1] BTW, I've had multiple people laugh at me when I mentioned this phrase in explaining our predicament to people.
Those people have no understanding of how this whole thing is developed, that they rely on for their job, which is sad on so many other levels...
thanks,
greg k-h
On Thu, Mar 22, 2018 at 06:52:51PM +0100, Greg Kroah-Hartman wrote:
[ ... ]
And that't the point to drive home here. If you stay away from updating to stable patches, you have a huge boatload of KNOWN SECURITY HOLES in your product. If you take them, you have the _possiblity_ of some bugs added, but overall, the rate is _VERY_ small. Guenter has numbers of 2-4 patches per year cause problems. That's lower than ANY other development model I have ever seen anywhere.
Unfortunately, people tend to be irrational. Yes, the regression rate I have observed is in the 0.1..0.15% range for v4.4.y and v4.14.y. Yet, there are still people who believe that we should not merge stable releases due to the regressions it causes (though they are much less vocal nowadays).
So, stick with known buggy/insecure devices? Or take the updates and handle the 1-2 problems a year they provide you. I think the cost-analysis is easy to make here :)
Agreed, on an objective basis. Unfortunately, one does not get credit for fixing bugs which have never been observed in the field because they have been fixed before they showed up. But one _does_ get blame for regressions.
Even though there have been very few regressions in absolute numbers, the default reaction to newly observed problems is "it must be due to a stable release merge", even though it almost always turns out to be incorrect.
The only way to deal with that is to reduce regressions to 0, or as close to 0 as possible. 0.1% is good, but not good enough.
Also, while I agree that we are much better off in respect to security, the verdict is still out if stable release merges actually improve release stability; I don't see a clear trend even with chromeos-4.4. Of course, it is all but impossible to say if this is due to 4.4.y or due to the 13,000+ patches we have on top of v4.4.y in chromeos-4.4.
Guenter
On Thu, Mar 22, 2018 at 11:56:35AM -0700, Guenter Roeck wrote:
On Thu, Mar 22, 2018 at 06:52:51PM +0100, Greg Kroah-Hartman wrote:
[ ... ]
And that't the point to drive home here. If you stay away from updating to stable patches, you have a huge boatload of KNOWN SECURITY HOLES in your product. If you take them, you have the _possiblity_ of some bugs added, but overall, the rate is _VERY_ small. Guenter has numbers of 2-4 patches per year cause problems. That's lower than ANY other development model I have ever seen anywhere.
Unfortunately, people tend to be irrational. Yes, the regression rate I have observed is in the 0.1..0.15% range for v4.4.y and v4.14.y. Yet, there are still people who believe that we should not merge stable releases due to the regressions it causes (though they are much less vocal nowadays).
So, stick with known buggy/insecure devices? Or take the updates and handle the 1-2 problems a year they provide you. I think the cost-analysis is easy to make here :)
Agreed, on an objective basis. Unfortunately, one does not get credit for fixing bugs which have never been observed in the field because they have been fixed before they showed up. But one _does_ get blame for regressions.
Someone has half-way joked that they were going to turn an intern on the stable releases and get a CVE assigned for every patch in them. Just to highlight just how many "real" things we are fixing before anyone notices.
Some days I think that is going to be the only way people pay attention :(
Even though there have been very few regressions in absolute numbers, the default reaction to newly observed problems is "it must be due to a stable release merge", even though it almost always turns out to be incorrect.
The only way to deal with that is to reduce regressions to 0, or as close to 0 as possible. 0.1% is good, but not good enough.
For some platforms, it is 0%. Facebook has published numbers showing this for a 2 year run of stable kernel releases. When you start dealing with crazy embedded/odd hardware platforms, the numbers does go up, just because no one is testing those platforms before I do a release.
Hence the push to do the testing on the real hardware, which is why kernel.ci and Linaro are now doing this. If you note, we also have people doing merges on their phones, and I get private emails from a number of SoC companies showing that their merge/test cycle worked as well.
And one note from that SoC testing, in the past 6 months since it has started, I have _NO_ reported regressions on any stable release so far. Not bad...
Also, while I agree that we are much better off in respect to security, the verdict is still out if stable release merges actually improve release stability; I don't see a clear trend even with chromeos-4.4. Of course, it is all but impossible to say if this is due to 4.4.y or due to the 13,000+ patches we have on top of v4.4.y in chromeos-4.4.
Yeah, _THATS_ the major issue here. The interaction of the 3+million lines of out-of-tree crazyness in device trees still scares me. But, as the SoCs are now reporting, so far it's going well, but it's only been 6 months. But it has been an "interesting" 6 months :)
As for "improve" stability, well, given that we are fixing known-root-holes, yes, that does increase stability. Again, I can crash any phone shipping today except for 2 of them, because those 2 updated to newer kernel versions. Do I need to start publishing reproducers?
Actually, along those lines, I have seen people start putting tests for reported kernel bugs into some regression tests. When those start being more popular (i.e. people start running them on devices that are not updated), then you will start to see the reports of "instability".
Oh well, back to patch reviewing, I'm preaching to the choir here...
thanks,
greg k-h
On Fri, Feb 16, 2018 at 10:10:44AM -0800, Brian Norris wrote:
On Fri, Feb 16, 2018 at 07:48:50AM +0100, Greg Kroah-Hartman wrote:
On Thu, Feb 15, 2018 at 06:31:48PM -0800, Brian Norris wrote:
On Thu, Feb 15, 2018 at 04:17:32PM +0100, Greg Kroah-Hartman wrote:
4.4-stable review patch. If anyone has any objections, please let me know.
Consider this an objection:
I'm currently arguing that this is unnecessarily regressing power consumption here:
https://patchwork.kernel.org/patch/10149195/
I'll leave it up to you what to do with this, but if this ends up in Chromium OS kernels, I'm likely to revert it there...
Is that patch in Linus's tree yet? If so, I'll be glad to also apply it here.
The link is the original patch, where I'm (too late?) complaining about its side effects. Hans and Marcel are discussing potential alternatives. This stuff happens in -rc kernels. But you're already ready to push it out to -stable users? I can try to push another few reverts into Linus's tree if that really helps, or else you can wait on pushing these to -stable until 4.16 settles down.
I can drop this for now, but I really like to be "bug compatible" with Linus's tree if at all possible. That keeps the pressure on people to get Linus's tree fixed :)
I'll drop this if the maintainer tells me to do so...
thanks,
greg k-h
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman ebiederm@xmission.com
commit 500d58300571b6602341b041f97c082a461ef994 upstream.
While reviewing the signal sending on openrisc the do_unaligned_access function stood out because it is obviously wrong. A comment about an si_code set above when actually si_code is never set. Leading to a random si_code being sent to userspace in the event of an unaligned access.
Looking further SIGBUS BUS_ADRALN is the proper pair of signal and si_code to send for an unaligned access. That is what other architectures do and what is required by posix.
Given that do_unaligned_access is broken in a way that no one can be relying on it on openrisc fix the code to just do the right thing.
Fixes: 769a8a96229e ("OpenRISC: Traps") Cc: Jonas Bonn jonas@southpole.se Cc: Stefan Kristiansson stefan.kristiansson@saunalahti.fi Cc: Stafford Horne shorne@gmail.com Cc: Arnd Bergmann arnd@arndb.de Cc: openrisc@lists.librecores.org Acked-by: Stafford Horne shorne@gmail.com Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/openrisc/kernel/traps.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/openrisc/kernel/traps.c +++ b/arch/openrisc/kernel/traps.c @@ -302,12 +302,12 @@ asmlinkage void do_unaligned_access(stru siginfo_t info;
if (user_mode(regs)) { - /* Send a SIGSEGV */ - info.si_signo = SIGSEGV; + /* Send a SIGBUS */ + info.si_signo = SIGBUS; info.si_errno = 0; - /* info.si_code has been set above */ - info.si_addr = (void *)address; - force_sig_info(SIGSEGV, &info, current); + info.si_code = BUS_ADRALN; + info.si_addr = (void __user *)address; + force_sig_info(SIGBUS, &info, current); } else { printk("KERNEL: Unaligned Access 0x%.8lx\n", address); show_registers(regs);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman ebiederm@xmission.com
commit 0e88bb002a9b2ee8cc3cc9478ce2dc126f849696 upstream.
Set si_signo.
Cc: Yoshinori Sato ysato@users.sourceforge.jp Cc: Rich Felker dalias@libc.org Cc: Paul Mundt lethal@linux-sh.org Cc: linux-sh@vger.kernel.org Fixes: 0983b31849bb ("sh: Wire up division and address error exceptions on SH-2A.") Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/sh/kernel/traps_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -607,7 +607,8 @@ asmlinkage void do_divide_error(unsigned break; }
- force_sig_info(SIGFPE, &info, current); + info.si_signo = SIGFPE; + force_sig_info(info.si_signo, &info, current); } #endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit 21ffceda1c8b3807615c40d440d7815e0c85d366 upstream.
On alpha, a process will crash if it attempts to start a thread and a signal is delivered at the same time. The crash can be reproduced with this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html
The reason for the crash is this: * we call the clone syscall * we go to the function copy_process * copy process calls copy_thread_tls, it is a wrapper around copy_thread * copy_thread sets the tls pointer: childti->pcb.unique = regs->r20 * copy_thread sets regs->r20 to zero * we go back to copy_process * copy process checks "if (signal_pending(current))" and returns -ERESTARTNOINTR * the clone syscall is restarted, but this time, regs->r20 is zero, so the new thread is created with zero tls pointer * the new thread crashes in start_thread when attempting to access tls
The comment in the code says that setting the register r20 is some compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug by zeroing regs->r20 only if CLONE_SETTLS is not set.
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Matt Turner mattst88@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/alpha/kernel/process.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -273,12 +273,13 @@ copy_thread(unsigned long clone_flags, u application calling fork. */ if (clone_flags & CLONE_SETTLS) childti->pcb.unique = regs->r20; + else + regs->r20 = 0; /* OSF/1 has some strange fork() semantics. */ childti->pcb.usp = usp ?: rdusp(); *childregs = *regs; childregs->r0 = 0; childregs->r19 = 0; childregs->r20 = 1; /* OSF/1 has some strange fork() semantics. */ - regs->r20 = 0; stack = ((struct switch_stack *) regs) - 1; *childstack = *stack; childstack->r26 = (unsigned long) ret_from_fork;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit 55fc633c41a08ce9244ff5f528f420b16b1e04d6 upstream.
We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get machine check exception when attempting to reboot the machine.
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Matt Turner mattst88@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/alpha/kernel/pci_impl.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/alpha/kernel/pci_impl.h +++ b/arch/alpha/kernel/pci_impl.h @@ -143,7 +143,8 @@ struct pci_iommu_arena };
#if defined(CONFIG_ALPHA_SRM) && \ - (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA)) + (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \ + defined(CONFIG_ALPHA_AVANTI)) # define NEED_SRM_SAVE_RESTORE #else # undef NEED_SRM_SAVE_RESTORE
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov jcmvbkbc@gmail.com
commit ca47480921587ae30417dd234a9f79af188e3666 upstream.
Return 0 if the operation was successful, not the userspace memory value. Check that userspace value equals passed oldval, not itself. Don't update *uval if the value wasn't read from userspace memory.
This fixes process hang due to infinite loop in futex_lock_pi. It also fixes a bunch of glibc tests nptl/tst-mutexpi*.
Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/xtensa/include/asm/futex.h | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-)
--- a/arch/xtensa/include/asm/futex.h +++ b/arch/xtensa/include/asm/futex.h @@ -109,7 +109,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 oldval, u32 newval) { int ret = 0; - u32 prev;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; @@ -120,26 +119,24 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
__asm__ __volatile__ ( " # futex_atomic_cmpxchg_inatomic\n" - "1: l32i %1, %3, 0\n" - " mov %0, %5\n" - " wsr %1, scompare1\n" - "2: s32c1i %0, %3, 0\n" - "3:\n" + " wsr %5, scompare1\n" + "1: s32c1i %1, %4, 0\n" + " s32i %1, %6, 0\n" + "2:\n" " .section .fixup,"ax"\n" " .align 4\n" - "4: .long 3b\n" - "5: l32r %1, 4b\n" - " movi %0, %6\n" + "3: .long 2b\n" + "4: l32r %1, 3b\n" + " movi %0, %7\n" " jx %1\n" " .previous\n" " .section __ex_table,"a"\n" - " .long 1b,5b,2b,5b\n" + " .long 1b,4b\n" " .previous\n" - : "+r" (ret), "=&r" (prev), "+m" (*uaddr) - : "r" (uaddr), "r" (oldval), "r" (newval), "I" (-EFAULT) + : "+r" (ret), "+r" (newval), "+m" (*uaddr), "+m" (*uval) + : "r" (uaddr), "r" (oldval), "r" (uval), "I" (-EFAULT) : "memory");
- *uval = prev; return ret; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche bart.vanassche@wdc.com
commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream.
Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails:
Kernel BUG at 00000000e98fd882 [verbose debug info unavailable]
Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path.
Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") Signed-off-by: Bart Van Assche bart.vanassche@wdc.com Cc: Tejun Heo tj@kernel.org Cc: Maciej S. Szmigiero mail@maciej.szmigiero.name Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/block/pktcdvd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2779,7 +2779,7 @@ static int pkt_setup_dev(dev_t dev, dev_ pd->pkt_dev = MKDEV(pktdev_major, idx); ret = pkt_new_dev(pd, dev); if (ret) - goto out_new_dev; + goto out_mem2;
/* inherit events of the host device */ disk->events = pd->bdev->bd_disk->events; @@ -2797,8 +2797,6 @@ static int pkt_setup_dev(dev_t dev, dev_ mutex_unlock(&ctl_mutex); return 0;
-out_new_dev: - blk_cleanup_queue(disk->queue); out_mem2: put_disk(disk); out_mem:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Borisov nborisov@suse.com
commit f3038ee3a3f1017a1cbe9907e31fa12d366c5dcb upstream.
This function was introduced by 247e743cbe6e ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit.
Signed-off-by: Nikolay Borisov nborisov@suse.com Reviewed-by: Qu Wenruo wqu@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- fs/btrfs/inode.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
--- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2015,7 +2015,15 @@ again: goto out; }
- btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state); + ret = btrfs_set_extent_delalloc(inode, page_start, page_end, + &cached_state); + if (ret) { + mapping_set_error(page->mapping, ret); + end_extent_writepage(page, ret, page_start, page_end); + ClearPageChecked(page); + goto out; + } + ClearPageChecked(page); set_page_dirty(page); out:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Keith Busch keith.busch@intel.com
commit 5bae7f73d378a986 upstream
Upstream is a near rewrite of the async nvme probe that ultimately didn't even cleanly merge in 4.5. This patch is a much smaller change targeted to the regression introduced in 4.4.
If a controller is in a degraded mode that needs admin assistence to recover, we need to leave the controller running. We just want to disable namespace access without shuting the controller down.
Fixes: 3cf519b5a8d4("nvme: merge nvme_dev_start, nvme_dev_resume and nvme_async_probe")
Signed-off-by: Keith Busch keith.busch@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/nvme/host/pci.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2976,10 +2976,16 @@ static void nvme_dev_shutdown(struct nvm mutex_unlock(&dev->shutdown_lock); }
-static void nvme_dev_remove(struct nvme_dev *dev) +static void nvme_remove_namespaces(struct nvme_dev *dev) { struct nvme_ns *ns, *next;
+ list_for_each_entry_safe(ns, next, &dev->namespaces, list) + nvme_ns_remove(ns); +} + +static void nvme_dev_remove(struct nvme_dev *dev) +{ if (nvme_io_incapable(dev)) { /* * If the device is not capable of IO (surprise hot-removal, @@ -2989,8 +2995,7 @@ static void nvme_dev_remove(struct nvme_ */ nvme_dev_shutdown(dev); } - list_for_each_entry_safe(ns, next, &dev->namespaces, list) - nvme_ns_remove(ns); + nvme_remove_namespaces(dev); }
static int nvme_setup_prp_pools(struct nvme_dev *dev) @@ -3174,7 +3179,7 @@ static void nvme_probe_work(struct work_ */ if (dev->online_queues < 2) { dev_warn(dev->dev, "IO queues not created\n"); - nvme_dev_remove(dev); + nvme_remove_namespaces(dev); } else { nvme_unfreeze_queues(dev); nvme_dev_add(dev);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream.
There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time.
Reported-by: Wang Qize wang_qize@venustech.com.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/acpi/sbshc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -275,8 +275,8 @@ static int acpi_smbus_hc_add(struct acpi device->driver_data = hc;
acpi_ec_add_query_handler(hc->ec, hc->query_bit, NULL, smbus_alarm, hc); - printk(KERN_INFO PREFIX "SBS HC: EC = 0x%p, offset = 0x%0x, query_bit = 0x%0x\n", - hc->ec, hc->offset, hc->query_bit); + dev_info(&device->dev, "SBS HC: offset = 0x%0x, query_bit = 0x%0x\n", + hc->offset, hc->query_bit);
return 0; }
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman ebiederm@xmission.com
commit 6ac1dc736b323011a55ecd1fc5897c24c4f77cbd upstream.
Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong.
So fix this by using a sensible si_code (SEGV_MAPERR) for this failure.
Fixes: b920de1b77b7 ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells dhowells@redhat.com Cc: Masakazu Urade urade.masakazu@jp.panasonic.com Cc: Koichi Yasutake yasutake.koichi@jp.panasonic.com Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/mn10300/mm/misalignment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -437,7 +437,7 @@ transfer_failed:
info.si_signo = SIGSEGV; info.si_errno = 0; - info.si_code = 0; + info.si_code = SEGV_MAPERR; info.si_addr = (void *) regs->pc; force_sig_info(SIGSEGV, &info, current); return;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) rostedt@goodmis.org
commit 7b6586562708d2b3a04fe49f217ddbadbbbb0546 upstream.
__unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex().
Al Viro reported this:
After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob.
Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one).
Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk
Fixes: 3ba009297149f ("ftrace: Introduce ftrace_glob structure") Reviewed-by: Dmitry Safonov 0x7f454c46@gmail.com Reviewed-by: Masami Hiramatsu mhiramat@kernel.org Reported-by: Al Viro viro@ZenIV.linux.org.uk Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- kernel/trace/ftrace.c | 1 - 1 file changed, 1 deletion(-)
--- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3845,7 +3845,6 @@ __unregister_ftrace_function_probe(char func_g.type = filter_parse_regex(glob, strlen(glob), &func_g.search, ¬); func_g.len = strlen(func_g.search); - func_g.search = glob;
/* we do not support '!' for function probes */ if (WARN_ON(not))
On 02/15/2018 08:15 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.116-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted ob my test system. No dmesg regressions.
thanks, -- Shuah
On Thu, Feb 15, 2018 at 04:15:57PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.116-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below.
thanks,
greg k-h
Merged, compiled, and flashed onto my Pixel 2 XL and OnePlus 5.
The v4l2-ioctl32 commits were interesting to sift through merging... I think I got everything correct though, the changes are in my trees under temporary tags if anyone cares to check them out:
https://github.com/nathanchance/wahoo/commits/queue-2.17 https://github.com/nathanchance/op5/commits/queue-3.10
So far, there have been no visible regressions in dmesg or general usage (I focused pretty heavily in the video area since those were the biggest changes).
Thanks! Nathan
On Thu, Feb 15, 2018 at 07:45:08PM -0700, Nathan Chancellor wrote:
On Thu, Feb 15, 2018 at 04:15:57PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.116-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below.
thanks,
greg k-h
Merged, compiled, and flashed onto my Pixel 2 XL and OnePlus 5.
The v4l2-ioctl32 commits were interesting to sift through merging... I think I got everything correct though, the changes are in my trees under temporary tags if anyone cares to check them out:
https://github.com/nathanchance/wahoo/commits/queue-2.17 https://github.com/nathanchance/op5/commits/queue-3.10
Thanks for that, yes, those are going to be an "interesting" merge :(
So far, there have been no visible regressions in dmesg or general usage (I focused pretty heavily in the video area since those were the biggest changes).
thanks for testing and letting us know.
greg k-h
On 15 February 2018 at 20:45, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.116-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm and x86_64.
Summary ------------------------------------------------------------------------
kernel: 4.4.116-rc1 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git git branch: linux-4.4.y git commit: f235d122836c25ae9e99721537bcb3f9e01ae7c6 git describe: v4.4.115-109-gf235d122836c Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.115-109...
No regressions (compared to build v4.4.115-54-g9d137e965a3f)
Boards, architectures and test suites: -------------------------------------
juno-r2 - arm64 * boot - pass: 20, * kselftest - skip: 31, pass: 32, * libhugetlbfs - skip: 1, pass: 90, * ltp-cap_bounds-tests - pass: 2, * ltp-containers-tests - skip: 53, pass: 28, * ltp-fcntl-locktests-tests - pass: 2, * ltp-filecaps-tests - pass: 2, * ltp-fs-tests - skip: 2, pass: 61, * ltp-fs_bind-tests - pass: 2, * ltp-fs_perms_simple-tests - pass: 19, * ltp-fsx-tests - pass: 2, * ltp-hugetlb-tests - pass: 22, * ltp-io-tests - pass: 3, * ltp-ipc-tests - pass: 9, * ltp-math-tests - pass: 11, * ltp-nptl-tests - pass: 2, * ltp-pty-tests - pass: 4, * ltp-sched-tests - skip: 4, pass: 10, * ltp-securebits-tests - pass: 4, * ltp-syscalls-tests - skip: 151, pass: 999, * ltp-timers-tests - skip: 1, pass: 12,
x15 - arm * boot - pass: 20, * kselftest - skip: 29, pass: 33, * libhugetlbfs - skip: 1, pass: 87, * ltp-cap_bounds-tests - pass: 2, * ltp-containers-tests - skip: 17, pass: 64, * ltp-fcntl-locktests-tests - pass: 2, * ltp-filecaps-tests - pass: 2, * ltp-fs-tests - skip: 2, pass: 61, * ltp-fs_bind-tests - pass: 2, * ltp-fs_perms_simple-tests - pass: 19, * ltp-fsx-tests - pass: 2, * ltp-hugetlb-tests - skip: 2, pass: 20, * ltp-io-tests - pass: 3, * ltp-ipc-tests - pass: 9, * ltp-math-tests - pass: 11, * ltp-nptl-tests - pass: 2, * ltp-pty-tests - pass: 4, * ltp-sched-tests - skip: 1, pass: 13, * ltp-securebits-tests - pass: 4, * ltp-syscalls-tests - skip: 98, pass: 1052, * ltp-timers-tests - skip: 1, pass: 12,
x86_64 * boot - pass: 20, * kselftest - skip: 31, pass: 48, * libhugetlbfs - skip: 1, pass: 90, * ltp-cap_bounds-tests - pass: 2, * ltp-containers-tests - skip: 17, pass: 63, * ltp-fcntl-locktests-tests - pass: 2, * ltp-filecaps-tests - pass: 2, * ltp-fs-tests - skip: 1, pass: 62, * ltp-fs_bind-tests - pass: 2, * ltp-fs_perms_simple-tests - pass: 19, * ltp-fsx-tests - pass: 2, * ltp-hugetlb-tests - pass: 21, * ltp-io-tests - pass: 3, * ltp-ipc-tests - pass: 9, * ltp-math-tests - pass: 11, * ltp-nptl-tests - pass: 2, * ltp-pty-tests - pass: 4, * ltp-sched-tests - skip: 5, pass: 9, * ltp-securebits-tests - pass: 4, * ltp-syscalls-tests - skip: 119, pass: 1031, * ltp-timers-tests - skip: 1, pass: 12,
Hikey results summary,
Summary ------------------------------------------------------------------------
kernel: 4.4.116-rc1 git repo: https://git.linaro.org/lkft/arm64-stable-rc.git git tag: 4.4.116-rc1-hikey-20180215-131 git commit: 4da825751e43ebd33e27ce2b70f1ede852310a87 git describe: 4.4.116-rc1-hikey-20180215-131 Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.1...
No regressions (compared to build 4.4.116-rc1-hikey-20180213-129)
Boards, architectures and test suites: -------------------------------------
hi6220-hikey - arm64 * boot - pass: 20, * kselftest - skip: 34, pass: 29, * libhugetlbfs - skip: 1, pass: 90, * ltp-cap_bounds-tests - pass: 2, * ltp-containers-tests - skip: 53, pass: 28, * ltp-fcntl-locktests-tests - pass: 2, * ltp-filecaps-tests - pass: 2, * ltp-fs-tests - skip: 2, pass: 61, * ltp-fs_bind-tests - pass: 2, * ltp-fs_perms_simple-tests - pass: 19, * ltp-fsx-tests - pass: 2, * ltp-hugetlb-tests - skip: 1, pass: 21, * ltp-io-tests - pass: 3, * ltp-ipc-tests - pass: 9, * ltp-math-tests - pass: 11, * ltp-nptl-tests - pass: 2, * ltp-pty-tests - pass: 4, * ltp-sched-tests - skip: 4, pass: 10, * ltp-securebits-tests - pass: 4, * ltp-syscalls-tests - skip: 154, pass: 996, * ltp-timers-tests - skip: 1, pass: 12,
Documentation - https://collaborate.linaro.org/display/LKFT/Email+Reports Tested-by: Naresh Kamboju naresh.kamboju@linaro.org
On 02/15/2018 07:15 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
Build results: total: 145 pass: 145 fail: 0 Qemu test results: total: 118 pass: 118 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On Fri, Feb 16, 2018 at 06:12:56AM -0800, Guenter Roeck wrote:
On 02/15/2018 07:15 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 4.4.116 release. There are 108 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat Feb 17 15:11:36 UTC 2018. Anything received after that time might be too late.
Build results: total: 145 pass: 145 fail: 0 Qemu test results: total: 118 pass: 118 fail: 0
Details are available at http://kerneltests.org/builders.
Good, thanks for testing.
greg k-h
linux-stable-mirror@lists.linaro.org