From: Rodrigo Siqueira Rodrigo.Siqueira@amd.com
[ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ]
[Why & How] DC now uses a new commit sequence which is more robust since it addresses cases where we need to reorganize pipes based on planes and other parameters. As a result, this new commit sequence reset the DC state by cleaning plane states and re-creating them accordingly with the need. For this reason, the dce_transform_set_pixel_storage_depth can be invoked after a plane state is destroyed and before its re-creation. In this situation and on DCE devices, DC will hit a condition that will trigger a dmesg log that looks like this:
Console: switching to colour frame buffer device 240x67 ------------[ cut here ]------------ [..] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu] [..] RSP: 0018:ffffc9000202b850 EFLAGS: 00010293 RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010 R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000 FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0 Call Trace: <TASK> ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] ? free_unref_page_commit+0x98/0x170 ? free_unref_page+0xcc/0x150 commit_tail+0x94/0x120 drm_atomic_helper_commit+0x10f/0x140 drm_atomic_commit+0x94/0xc0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c drm_client_modeset_commit_atomic+0x203/0x250 drm_client_modeset_commit_locked+0x56/0x150 drm_client_modeset_commit+0x21/0x40 drm_fb_helper_lastclose+0x42/0x70 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] drm_release+0xda/0x110 __fput+0x89/0x240 task_work_run+0x5c/0x90 do_exit+0x333/0xae0 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x5b/0x80 ? exit_to_user_mode_prepare+0x1e/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff016ceaca1 Code: Unable to access opcode bytes at RIP 0x7ff016ceac77. RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00 R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00 </TASK>
Since this issue only happens in a transition state on DC, this commit replace BREAK_TO_DEBUGGER with DC_LOG_DC.
Reviewed-by: Harry Wentland Harry.Wentland@amd.com Acked-by: Qingqing Zhuo qingqing.zhuo@amd.com Signed-off-by: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dce/dce_transform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c b/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c index 6fd57cfb112f5..96fdc18ecb3bf 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c @@ -778,7 +778,7 @@ static void dce_transform_set_pixel_storage_depth( color_depth = COLOR_DEPTH_101010; pixel_depth = 0; expan_mode = 1; - BREAK_TO_DEBUGGER(); + DC_LOG_DC("The pixel depth %d is not valid, set COLOR_DEPTH_101010 instead.", depth); break; }
@@ -792,8 +792,7 @@ static void dce_transform_set_pixel_storage_depth( if (!(xfm_dce->lb_pixel_depth_supported & depth)) { /*we should use unsupported capabilities * unless it is required by w/a*/ - DC_LOG_WARNING("%s: Capability not supported", - __func__); + DC_LOG_DC("%s: Capability not supported", __func__); } }
From: Alexander Stein alexander.stein@ew.tq-group.com
[ Upstream commit fd883d79e4dcd2417c2b80756f22a2ff03b0f6e0 ]
There is no sense in doing a cache sync on REGCACHE_NONE regmaps. Instead of panicking the kernel due to missing cache_ops, return an error to client driver.
Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com Link: https://lore.kernel.org/r/20230313071812.13577-1-alexander.stein@ew.tq-group... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/regmap/regcache.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 7f4b3b62492ca..7fdd702e564ae 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -343,6 +343,9 @@ int regcache_sync(struct regmap *map) const char *name; bool bypass;
+ if (WARN_ON(map->cache_type == REGCACHE_NONE)) + return -EINVAL; + BUG_ON(!map->cache_ops);
map->lock(map->lock_arg); @@ -412,6 +415,9 @@ int regcache_sync_region(struct regmap *map, unsigned int min, const char *name; bool bypass;
+ if (WARN_ON(map->cache_type == REGCACHE_NONE)) + return -EINVAL; + BUG_ON(!map->cache_ops);
map->lock(map->lock_arg);
From: Zheng Wang zyytlz.wz@163.com
[ Upstream commit 63264422785021704c39b38f65a78ab9e4a186d7 ]
In r592_probe, dev->detect_timer was bound with r592_detect_timer. In r592_irq function, the timer function will be invoked by mod_timer.
If we remove the module which will call hantro_release to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug.
Fix it by canceling the work before cleanup in r592_remove.
CPU0 CPU1
|r592_detect_timer r592_remove | memstick_free_host| put_device; | kfree(host); | | | queue_work | &host->media_checker //use
Signed-off-by: Zheng Wang zyytlz.wz@163.com Link: https://lore.kernel.org/r/20230307164338.1246287-1-zyytlz.wz@163.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/memstick/host/r592.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c index eaa2a94d18be4..dd06c18495eb6 100644 --- a/drivers/memstick/host/r592.c +++ b/drivers/memstick/host/r592.c @@ -828,7 +828,7 @@ static void r592_remove(struct pci_dev *pdev) /* Stop the processing thread. That ensures that we won't take any more requests */ kthread_stop(dev->io_thread); - + del_timer_sync(&dev->detect_timer); r592_enable_device(dev, false);
while (!error && dev->req) {
From: Pierre Gondois pierre.gondois@arm.com
[ Upstream commit d2c48b2387eb89e0bf2a2e06e30987cf410acad4 ]
Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20
sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled.
SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1]
Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them.
Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU.
[1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/
Suggested-by: James Morse james.morse@arm.com Signed-off-by: Pierre Gondois pierre.gondois@arm.com Reviewed-by: James Morse james.morse@arm.com Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/arm_sdei.c | 37 ++++++++++++++++++++----------------- include/linux/cpuhotplug.h | 1 - 2 files changed, 20 insertions(+), 18 deletions(-)
diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c index e497785cd99fe..b0e8752174c6f 100644 --- a/drivers/firmware/arm_sdei.c +++ b/drivers/firmware/arm_sdei.c @@ -44,6 +44,8 @@ static asmlinkage void (*sdei_firmware_call)(unsigned long function_id, /* entry point from firmware to arch asm code */ static unsigned long sdei_entry_point;
+static int sdei_hp_state; + struct sdei_event { /* These three are protected by the sdei_list_lock */ struct list_head list; @@ -305,8 +307,6 @@ int sdei_mask_local_cpu(void) { int err;
- WARN_ON_ONCE(preemptible()); - err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PE_MASK, 0, 0, 0, 0, 0, NULL); if (err && err != -EIO) { pr_warn_once("failed to mask CPU[%u]: %d\n", @@ -319,6 +319,7 @@ int sdei_mask_local_cpu(void)
static void _ipi_mask_cpu(void *ignored) { + WARN_ON_ONCE(preemptible()); sdei_mask_local_cpu(); }
@@ -326,8 +327,6 @@ int sdei_unmask_local_cpu(void) { int err;
- WARN_ON_ONCE(preemptible()); - err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PE_UNMASK, 0, 0, 0, 0, 0, NULL); if (err && err != -EIO) { pr_warn_once("failed to unmask CPU[%u]: %d\n", @@ -340,6 +339,7 @@ int sdei_unmask_local_cpu(void)
static void _ipi_unmask_cpu(void *ignored) { + WARN_ON_ONCE(preemptible()); sdei_unmask_local_cpu(); }
@@ -347,6 +347,8 @@ static void _ipi_private_reset(void *ignored) { int err;
+ WARN_ON_ONCE(preemptible()); + err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PRIVATE_RESET, 0, 0, 0, 0, 0, NULL); if (err && err != -EIO) @@ -393,8 +395,6 @@ static void _local_event_enable(void *data) int err; struct sdei_crosscall_args *arg = data;
- WARN_ON_ONCE(preemptible()); - err = sdei_api_event_enable(arg->event->event_num);
sdei_cross_call_return(arg, err); @@ -485,8 +485,6 @@ static void _local_event_unregister(void *data) int err; struct sdei_crosscall_args *arg = data;
- WARN_ON_ONCE(preemptible()); - err = sdei_api_event_unregister(arg->event->event_num);
sdei_cross_call_return(arg, err); @@ -575,8 +573,6 @@ static void _local_event_register(void *data) struct sdei_registered_event *reg; struct sdei_crosscall_args *arg = data;
- WARN_ON(preemptible()); - reg = per_cpu_ptr(arg->event->private_registered, smp_processor_id()); err = sdei_api_event_register(arg->event->event_num, sdei_entry_point, reg, 0, 0); @@ -756,6 +752,8 @@ static int sdei_pm_notifier(struct notifier_block *nb, unsigned long action, { int rv;
+ WARN_ON_ONCE(preemptible()); + switch (action) { case CPU_PM_ENTER: rv = sdei_mask_local_cpu(); @@ -804,7 +802,7 @@ static int sdei_device_freeze(struct device *dev) int err;
/* unregister private events */ - cpuhp_remove_state(CPUHP_AP_ARM_SDEI_STARTING); + cpuhp_remove_state(sdei_entry_point);
err = sdei_unregister_shared(); if (err) @@ -825,12 +823,15 @@ static int sdei_device_thaw(struct device *dev) return err; }
- err = cpuhp_setup_state(CPUHP_AP_ARM_SDEI_STARTING, "SDEI", + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "SDEI", &sdei_cpuhp_up, &sdei_cpuhp_down); - if (err) + if (err < 0) { pr_warn("Failed to re-register CPU hotplug notifier...\n"); + return err; + }
- return err; + sdei_hp_state = err; + return 0; }
static int sdei_device_restore(struct device *dev) @@ -862,7 +863,7 @@ static int sdei_reboot_notifier(struct notifier_block *nb, unsigned long action, * We are going to reset the interface, after this there is no point * doing work when we take CPUs offline. */ - cpuhp_remove_state(CPUHP_AP_ARM_SDEI_STARTING); + cpuhp_remove_state(sdei_hp_state);
sdei_platform_reset();
@@ -1044,13 +1045,15 @@ static int sdei_probe(struct platform_device *pdev) goto remove_cpupm; }
- err = cpuhp_setup_state(CPUHP_AP_ARM_SDEI_STARTING, "SDEI", + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "SDEI", &sdei_cpuhp_up, &sdei_cpuhp_down); - if (err) { + if (err < 0) { pr_warn("Failed to register CPU hotplug notifier...\n"); goto remove_reboot; }
+ sdei_hp_state = err; + return 0;
remove_reboot: diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 15835f37bd5f2..8134cc3b99cdc 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -111,7 +111,6 @@ enum cpuhp_state { CPUHP_AP_PERF_X86_CSTATE_STARTING, CPUHP_AP_PERF_XTENSA_STARTING, CPUHP_AP_MIPS_OP_LOONGSON3_STARTING, - CPUHP_AP_ARM_SDEI_STARTING, CPUHP_AP_ARM_VFP_STARTING, CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING, CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
From: Armin Wolf W_Armin@gmx.de
[ Upstream commit e5b492c6bb900fcf9722e05f4a10924410e170c1 ]
When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded.
Fix this by flushing the EC query workqueue when removing custom query handlers.
Tested on a Acer Travelmate 4002WLMi
Signed-off-by: Armin Wolf W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/ec.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index defc5796b5084..c7baccd47b89f 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1118,6 +1118,7 @@ static void acpi_ec_remove_query_handlers(struct acpi_ec *ec, void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) { acpi_ec_remove_query_handlers(ec, false, query_bit); + flush_workqueue(ec_query_wq); } EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
From: Nur Hussein hussein@unixcat.org
[ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ]
In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment.
Signed-off-by: Nur Hussein hussein@unixcat.org Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/tegra/sor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c index 0419b6105c8a5..ccd084abc8c94 100644 --- a/drivers/gpu/drm/tegra/sor.c +++ b/drivers/gpu/drm/tegra/sor.c @@ -906,7 +906,7 @@ static int tegra_sor_compute_config(struct tegra_sor *sor, struct drm_dp_link *link) { const u64 f = 100000, link_rate = link->rate * 1000; - const u64 pclk = mode->clock * 1000; + const u64 pclk = (u64)mode->clock * 1000; u64 input, output, watermark, num; struct tegra_sor_params params; u32 num_syms_per_line;
From: Tamir Duberstein tamird@google.com
[ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ]
ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e
Before this change we see the following UBSAN stack trace in Fuchsia:
#0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603
Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master.
Link: https://github.com/acpica/acpica/commit/770653e3 Signed-off-by: Bob Moore robert.moore@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/dswstate.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c index de79f835a3737..7979d52dfbc96 100644 --- a/drivers/acpi/acpica/dswstate.c +++ b/drivers/acpi/acpica/dswstate.c @@ -576,9 +576,14 @@ acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state, ACPI_FUNCTION_TRACE(ds_init_aml_walk);
walk_state->parser_state.aml = - walk_state->parser_state.aml_start = aml_start; - walk_state->parser_state.aml_end = - walk_state->parser_state.pkg_end = aml_start + aml_length; + walk_state->parser_state.aml_start = + walk_state->parser_state.aml_end = + walk_state->parser_state.pkg_end = aml_start; + /* Avoid undefined behavior: applying zero offset to null pointer */ + if (aml_length != 0) { + walk_state->parser_state.aml_end += aml_length; + walk_state->parser_state.pkg_end += aml_length; + }
/* The next_op of the next_walk will be the beginning of the method */
From: void0red 30990023+void0red@users.noreply.github.com
[ Upstream commit ae5a0eccc85fc960834dd66e3befc2728284b86c ]
ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4
ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause null pointer dereference later.
Link: https://github.com/acpica/acpica/commit/0d5f467d Signed-off-by: Bob Moore robert.moore@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/acpica/dbnames.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/acpi/acpica/dbnames.c b/drivers/acpi/acpica/dbnames.c index 63fe30e868075..7f14403165dd1 100644 --- a/drivers/acpi/acpica/dbnames.c +++ b/drivers/acpi/acpica/dbnames.c @@ -571,6 +571,9 @@ acpi_status acpi_db_display_objects(char *obj_type_arg, char *display_count_arg) object_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_object_info));
+ if (!object_info) + return (AE_NO_MEMORY); + /* Walk the namespace from the root */
(void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 0ff7aee24e47beb4306ce050824b54147f2fabfa ]
Exiting early in remove without releasing all acquired resources yields leaks. Note that e.g. memory allocated with devm_zalloc() is freed after .remove() returns, even if the return code was negative.
While blocking_notifier_chain_unregister() won't fail and so the change is somewhat cosmetic, platform driver's .remove callbacks are about to be converted to return void. To prepare that, keep the error message but don't return early.
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/cros-ec-cec/cros-ec-cec.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c index ae274a7aa3a94..dbdb57aea7457 100644 --- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c +++ b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c @@ -324,14 +324,16 @@ static int cros_ec_cec_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; int ret;
+ /* + * blocking_notifier_chain_unregister() only fails if the notifier isn't + * in the list. We know it was added to it by .probe(), so there should + * be no need for error checking. Be cautious and still check. + */ ret = blocking_notifier_chain_unregister( &cros_ec_cec->cros_ec->event_notifier, &cros_ec_cec->notifier); - - if (ret) { + if (ret) dev_err(dev, "failed to unregister notifier\n"); - return ret; - }
cec_notifier_cec_adap_unregister(cros_ec_cec->notify); cec_unregister_adapter(cros_ec_cec->adap);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin