For Gen-1 targets like IPQ8074, it is seen that stressing out the controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.

Cc: stable@vger.kernel.org Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 92682d3c9478..284a4553070f 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -666,6 +666,7 @@ dwc_0: usb@8a00000 { interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk; @@ -715,6 +716,7 @@ dwc_1: usb@8c00000 { interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; + snps,parkmode-disable-ss-quirk; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; snps,dis_u2_susphy_quirk;