The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller.
Add the "altr,sysmgr-syscon" property to all gmac nodes.
This patch fixes:
[ 0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found [ 0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data
Cc: stable@vger.kernel.org Reported-by: Ley Foon Tan ley.foon.tan@intel.com Signed-off-by: Dinh Nguyen dinguyen@kernel.org --- arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 7c649f6b14cb..cd7c76e58b09 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -162,6 +162,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 1>; + altr,sysmgr-syscon = <&sysmgr 0x44 0>; status = "disabled"; };
@@ -179,6 +180,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; + altr,sysmgr-syscon = <&sysmgr 0x48 0>; status = "disabled"; };
@@ -196,6 +198,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; + altr,sysmgr-syscon = <&sysmgr 0x4c 0>; status = "disabled"; };
Hi,
On Wed, Mar 13, 2019 at 09:29:56PM -0500, Dinh Nguyen wrote:
The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller.
Add the "altr,sysmgr-syscon" property to all gmac nodes.
This patch fixes:
[ 0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found [ 0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data
Cc: stable@vger.kernel.org Reported-by: Ley Foon Tan ley.foon.tan@intel.com Signed-off-by: Dinh Nguyen dinguyen@kernel.org
This patch broke the boot on my board when upgrading from v5.1-rc3 to -rc4 (using a simple custom DTS including socfpga_stratix10.dtsi, basically enabling just ethernet and serial console). Previously, when the socfpga-dwmac probe failed with above messages, the generic dwmac driver was used instead to get working networking.
Now that the socfpga-dwmac probe succeeds, there's a sudden reset/crash due to exception. Apparently the reason is that the access to these registers is restricted from the kernel and the mainline socfpga-dwmac driver is missing the support for the SMC call access? Am I missing something, or was it too early to apply this patch to mainline?
A.
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 7c649f6b14cb..cd7c76e58b09 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -162,6 +162,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 1>;
altr,sysmgr-syscon = <&sysmgr 0x44 0>; status = "disabled";@@ -179,6 +180,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>;
altr,sysmgr-syscon = <&sysmgr 0x48 0>; status = "disabled";@@ -196,6 +198,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>;
altr,sysmgr-syscon = <&sysmgr 0x4c 0>; status = "disabled";2.20.0
linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Aaro,
On 4/12/19 12:19 PM, Aaro Koskinen wrote:
Hi,
On Wed, Mar 13, 2019 at 09:29:56PM -0500, Dinh Nguyen wrote:
The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller.
Add the "altr,sysmgr-syscon" property to all gmac nodes.
This patch fixes:
[ 0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found [ 0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data
Cc: stable@vger.kernel.org Reported-by: Ley Foon Tan ley.foon.tan@intel.com Signed-off-by: Dinh Nguyen dinguyen@kernel.org
This patch broke the boot on my board when upgrading from v5.1-rc3 to -rc4 (using a simple custom DTS including socfpga_stratix10.dtsi, basically enabling just ethernet and serial console). Previously, when the socfpga-dwmac probe failed with above messages, the generic dwmac driver was used instead to get working networking.
Now that the socfpga-dwmac probe succeeds, there's a sudden reset/crash due to exception. Apparently the reason is that the access to these registers is restricted from the kernel and the mainline socfpga-dwmac driver is missing the support for the SMC call access? Am I missing something, or was it too early to apply this patch to mainline?
Argh, you're right! Apologies, but I think this patch is to early to apply to mainline. As there was a patch that we have downstream to support the SMC call access, I made a mistake and tested this patch with it. Let me try to clean up the downstream patch for submission to fix this.
Meanwhile, are you ok with just using the generic dwmac driver to get around this issue? Otherwise, I can ask the to revert the patch.
Dinh
Hi,
On Mon, Apr 15, 2019 at 11:10:49AM -0500, Dinh Nguyen wrote:
On 4/12/19 12:19 PM, Aaro Koskinen wrote:
On Wed, Mar 13, 2019 at 09:29:56PM -0500, Dinh Nguyen wrote:
The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller.
Add the "altr,sysmgr-syscon" property to all gmac nodes.
This patch fixes:
[ 0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found [ 0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data
Cc: stable@vger.kernel.org Reported-by: Ley Foon Tan ley.foon.tan@intel.com Signed-off-by: Dinh Nguyen dinguyen@kernel.org
This patch broke the boot on my board when upgrading from v5.1-rc3 to -rc4 (using a simple custom DTS including socfpga_stratix10.dtsi, basically enabling just ethernet and serial console). Previously, when the socfpga-dwmac probe failed with above messages, the generic dwmac driver was used instead to get working networking.
Now that the socfpga-dwmac probe succeeds, there's a sudden reset/crash due to exception. Apparently the reason is that the access to these registers is restricted from the kernel and the mainline socfpga-dwmac driver is missing the support for the SMC call access? Am I missing something, or was it too early to apply this patch to mainline?
Argh, you're right! Apologies, but I think this patch is to early to apply to mainline. As there was a patch that we have downstream to support the SMC call access, I made a mistake and tested this patch with it. Let me try to clean up the downstream patch for submission to fix this.
Ok, thanks for comforming.
Meanwhile, are you ok with just using the generic dwmac driver to get around this issue? Otherwise, I can ask the to revert the patch.
Personally I'm fine with the generic dwmac for time being.
A.
linux-stable-mirror@lists.linaro.org
-
Aaro Koskinen -
Dinh Nguyen