commit 5de4db8fcb6d6fc7d9064c22841211790c0ab81b upstream.
We don't need to send firmware data asynchronously, much simpler is just use synchronous usb_bulk_msg().
[ stable note: this patch was originally developed as cleanup, but it remove incorrect usage of page_frag_alloc(): alloc more than PAGE_SIZE and create not ARCH_DMA_MINALIGN dma buffers needed at least for performance reason. Was tested on 5.0 and 4.20, see https://bugzilla.kernel.org/show_bug.cgi?id=202673 and https://bugzilla.kernel.org/show_bug.cgi?id=202241 ]
Tested-by: Lorenzo Bianconi lorenzo.bianconi@redhat.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Stanislaw Gruszka sgruszka@redhat.com --- drivers/net/wireless/mediatek/mt76/mt76.h | 13 ++++++ .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 52 +++++++--------------- drivers/net/wireless/mediatek/mt76/usb.c | 1 - 3 files changed, 29 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h index 5cd508a68609..6d29ba4046c3 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76.h +++ b/drivers/net/wireless/mediatek/mt76/mt76.h @@ -713,6 +713,19 @@ static inline bool mt76u_check_sg(struct mt76_dev *dev) udev->speed == USB_SPEED_WIRELESS)); }
+static inline int +mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout) +{ + struct usb_interface *intf = to_usb_interface(dev->dev); + struct usb_device *udev = interface_to_usbdev(intf); + struct mt76_usb *usb = &dev->usb; + unsigned int pipe; + int sent; + + pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]); + return usb_bulk_msg(udev, pipe, data, len, &sent, timeout); +} + int mt76u_vendor_request(struct mt76_dev *dev, u8 req, u8 req_type, u16 val, u16 offset, void *buf, size_t len); diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c index 6db789f90269..2ca393e267af 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c @@ -121,18 +121,14 @@ static int __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb, int cmd, bool wait_resp) { - struct usb_interface *intf = to_usb_interface(dev->dev); - struct usb_device *udev = interface_to_usbdev(intf); struct mt76_usb *usb = &dev->usb; - unsigned int pipe; - int ret, sent; + int ret; u8 seq = 0; u32 info;
if (test_bit(MT76_REMOVED, &dev->state)) return 0;
- pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]); if (wait_resp) { seq = ++usb->mcu.msg_seq & 0xf; if (!seq) @@ -146,7 +142,7 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb, if (ret) return ret;
- ret = usb_bulk_msg(udev, pipe, skb->data, skb->len, &sent, 500); + ret = mt76u_bulk_msg(dev, skb->data, skb->len, 500); if (ret) return ret;
@@ -268,14 +264,12 @@ void mt76x02u_mcu_fw_reset(struct mt76x02_dev *dev) EXPORT_SYMBOL_GPL(mt76x02u_mcu_fw_reset);
static int -__mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf, +__mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, u8 *data, const void *fw_data, int len, u32 dst_addr) { - u8 *data = sg_virt(&buf->urb->sg[0]); - DECLARE_COMPLETION_ONSTACK(cmpl); __le32 info; u32 val; - int err; + int err, data_len;
info = cpu_to_le32(FIELD_PREP(MT_MCU_MSG_PORT, CPU_TX_PORT) | FIELD_PREP(MT_MCU_MSG_LEN, len) | @@ -291,25 +285,12 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf, mt76u_single_wr(&dev->mt76, MT_VEND_WRITE_FCE, MT_FCE_DMA_LEN, len << 16);
- buf->len = MT_CMD_HDR_LEN + len + sizeof(info); - err = mt76u_submit_buf(&dev->mt76, USB_DIR_OUT, - MT_EP_OUT_INBAND_CMD, - buf, GFP_KERNEL, - mt76u_mcu_complete_urb, &cmpl); - if (err < 0) - return err; - - if (!wait_for_completion_timeout(&cmpl, - msecs_to_jiffies(1000))) { - dev_err(dev->mt76.dev, "firmware upload timed out\n"); - usb_kill_urb(buf->urb); - return -ETIMEDOUT; - } + data_len = MT_CMD_HDR_LEN + len + sizeof(info);
- if (mt76u_urb_error(buf->urb)) { - dev_err(dev->mt76.dev, "firmware upload failed: %d\n", - buf->urb->status); - return buf->urb->status; + err = mt76u_bulk_msg(&dev->mt76, data, data_len, 1000); + if (err) { + dev_err(dev->mt76.dev, "firmware upload failed: %d\n", err); + return err; }
val = mt76_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX); @@ -322,17 +303,16 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, struct mt76u_buf *buf, int mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, const void *data, int data_len, u32 max_payload, u32 offset) { - int err, len, pos = 0, max_len = max_payload - 8; - struct mt76u_buf buf; + int len, err = 0, pos = 0, max_len = max_payload - 8; + u8 *buf;
- err = mt76u_buf_alloc(&dev->mt76, &buf, 1, max_payload, max_payload, - GFP_KERNEL); - if (err < 0) - return err; + buf = kmalloc(max_payload, GFP_KERNEL); + if (!buf) + return -ENOMEM;
while (data_len > 0) { len = min_t(int, data_len, max_len); - err = __mt76x02u_mcu_fw_send_data(dev, &buf, data + pos, + err = __mt76x02u_mcu_fw_send_data(dev, buf, data + pos, len, offset + pos); if (err < 0) break; @@ -341,7 +321,7 @@ int mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, const void *data, pos += len; usleep_range(5000, 10000); } - mt76u_buf_free(&buf); + kfree(buf);
return err; } diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c index b061263453d4..09923cedd039 100644 --- a/drivers/net/wireless/mediatek/mt76/usb.c +++ b/drivers/net/wireless/mediatek/mt76/usb.c @@ -326,7 +326,6 @@ int mt76u_buf_alloc(struct mt76_dev *dev, struct mt76u_buf *buf,
return mt76u_fill_rx_sg(dev, buf, nsgs, len, sglen); } -EXPORT_SYMBOL_GPL(mt76u_buf_alloc);
void mt76u_buf_free(struct mt76u_buf *buf) {
On Thu, Mar 28, 2019 at 02:29:39PM +0100, Stanislaw Gruszka wrote:
commit 5de4db8fcb6d6fc7d9064c22841211790c0ab81b upstream.
We don't need to send firmware data asynchronously, much simpler is just use synchronous usb_bulk_msg().
[ stable note: this patch was originally developed as cleanup, but it remove incorrect usage of page_frag_alloc(): alloc more than PAGE_SIZE and create not ARCH_DMA_MINALIGN dma buffers needed at least for performance reason. Was tested on 5.0 and 4.20, see https://bugzilla.kernel.org/show_bug.cgi?id=202673 and https://bugzilla.kernel.org/show_bug.cgi?id=202241 ]
Tested-by: Lorenzo Bianconi lorenzo.bianconi@redhat.com Signed-off-by: Felix Fietkau nbd@nbd.name Signed-off-by: Stanislaw Gruszka sgruszka@redhat.com
drivers/net/wireless/mediatek/mt76/mt76.h | 13 ++++++ .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 52 +++++++--------------- drivers/net/wireless/mediatek/mt76/usb.c | 1 - 3 files changed, 29 insertions(+), 37 deletions(-)
4.20 is now end-of-life, but I have queued this up for 5.0.y, thanks!
greg k-h
linux-stable-mirror@lists.linaro.org