From: Alexander Aring aahringo@redhat.com
[ Upstream commit 92c48950b43f4a767388cf87709d8687151a641f ]
This patch fixes the following message which randomly pops up during glocktop call:
seq_file: buggy .next function table_seq_next did not update position index
The issue is that seq_read_iter() in fs/seq_file.c also needs an increment of the index in an non next record case as well which this patch fixes otherwise seq_read_iter() will print out the above message.
Signed-off-by: Alexander Aring aahringo@redhat.com Signed-off-by: David Teigland teigland@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/dlm/debug_fs.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c index fa08448e35dd..bb87dad03cd4 100644 --- a/fs/dlm/debug_fs.c +++ b/fs/dlm/debug_fs.c @@ -544,6 +544,7 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
if (bucket >= ls->ls_rsbtbl_size) { kfree(ri); + ++*pos; return NULL; } tree = toss ? &ls->ls_rsbtbl[bucket].toss : &ls->ls_rsbtbl[bucket].keep;
From: Hoang Le hoang.h.le@dektech.com.au
[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]
(struct tipc_link_info)->dest is in network order (__be32), so we must convert the value to network order before assigning. The problem detected by sparse:
net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types) net/tipc/netlink_compat.c:699:24: expected restricted __be32 [usertype] dest net/tipc/netlink_compat.c:699:24: got int
Acked-by: Jon Maloy jmaloy@redhat.com Signed-off-by: Hoang Le hoang.h.le@dektech.com.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/tipc/netlink_compat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index f8e111218a0e..5086e27d3011 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -671,7 +671,7 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg, if (err) return err;
- link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]); + link_info.dest = htonl(nla_get_flag(link[TIPC_NLA_LINK_DEST])); link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP])); nla_strlcpy(link_info.str, link[TIPC_NLA_LINK_NAME], TIPC_MAX_LINK_NAME);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit b7c7203a1f751348f35fc4bcb157572d303f7573 ]
The Asus T100TAF uses the same jack-detect settings as the T100TA, this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support on the T100TAF.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index d63d99776384..62b4187e9f44 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -473,6 +473,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | BYT_RT5640_MONO_SPEAKER | BYT_RT5640_DIFF_MIC | BYT_RT5640_SSP0_AIF2 |
From: Jonathan McDowell noodles@earth.li
[ Upstream commit e127906b68b49ddb3ecba39ffa36a329c48197d3 ]
Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values") started using the TX FIFO size to verify what counts as a valid MTU request for the stmmac driver. This is unset for the ipq806x variant. Looking at older patches for this it seems the RX + TXs buffers can be up to 8k, so set appropriately.
(I sent this as an RFC patch in June last year, but received no replies. I've been running with this on my hardware (a MikroTik RB3011) since then with larger MTUs to support both the internal qca8k switch and VLANs with no problems. Without the patch it's impossible to set the larger MTU required to support this.)
Signed-off-by: Jonathan McDowell noodles@earth.li Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c index 826626e870d5..0f56f8e33691 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -351,6 +351,8 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) plat_dat->bsp_priv = gmac; plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed; plat_dat->multicast_filter_bins = 0; + plat_dat->tx_fifo_size = 8192; + plat_dat->rx_fifo_size = 8192;
err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (err)
From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit 71581562ee36032d2d574a9b23ad4af6d6a64cf7 ]
The buggy parameters currently get caught later, but emit a noisy WARN. Userspace should not be able to trigger this, so add similar checks much earlier. Also avoids some unneeded code paths, of course. Apply kernel coding stlye to a comment while here.
Reported-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com Tested-by: syzbot+ffb0b3ffa6cfbc7d7b3f@syzkaller.appspotmail.com Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/i2c-dev.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index cbda91a0cb5f..1d10ee86299d 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -448,8 +448,13 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) sizeof(rdwr_arg))) return -EFAULT;
- /* Put an arbitrary limit on the number of messages that can - * be sent at once */ + if (!rdwr_arg.msgs || rdwr_arg.nmsgs == 0) + return -EINVAL; + + /* + * Put an arbitrary limit on the number of messages that can + * be sent at once + */ if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS) return -EINVAL;
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 507cdb9adba006a7798c358456426e1aea3d9c4f ]
hdsp wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable.
[ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device [ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.766985] Call Trace: [ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp] [ 1.767388] release_card_device+0x4b/0x80 [snd] [ 1.767639] device_release+0x3b/0xa0 [ 1.767838] kobject_put+0x94/0x1b0 [ 1.768027] put_device+0x13/0x20 [ 1.768207] snd_card_free+0x61/0x90 [snd] [ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp]
Suggested-by: Takashi Iwai tiwai@suse.de Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210321153840.378226-2-ztong0001@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/rme9652/hdsp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index ba99ff0e93e0..a0797fc17d95 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -5343,7 +5343,8 @@ static int snd_hdsp_free(struct hdsp *hdsp) if (hdsp->port) pci_release_regions(hdsp->pci);
- pci_disable_device(hdsp->pci); + if (pci_is_enabled(hdsp->pci)) + pci_disable_device(hdsp->pci); return 0; }
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit 790f5719b85e12e10c41753b864e74249585ed08 ]
hdspm wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable.
[ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device [ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.795181] Call Trace: [ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm] [ 1.795595] release_card_device+0x4b/0x80 [snd] [ 1.795860] device_release+0x3b/0xa0 [ 1.796072] kobject_put+0x94/0x1b0 [ 1.796260] put_device+0x13/0x20 [ 1.796438] snd_card_free+0x61/0x90 [snd] [ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm]
Suggested-by: Takashi Iwai tiwai@suse.de Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210321153840.378226-3-ztong0001@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/rme9652/hdspm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 11b5b5e0e058..5dfddade1bae 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -6913,7 +6913,8 @@ static int snd_hdspm_free(struct hdspm * hdspm) if (hdspm->port) pci_release_regions(hdspm->pci);
- pci_disable_device(hdspm->pci); + if (pci_is_enabled(hdspm->pci)) + pci_disable_device(hdspm->pci); return 0; }
From: Tong Zhang ztong0001@gmail.com
[ Upstream commit f57a741874bb6995089020e97a1dcdf9b165dcbe ]
rme9652 wants to disable a not enabled pci device, which makes kernel throw a warning. Make sure the device is enabled before calling disable.
[ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device [ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0 [ 1.759968] Call Trace: [ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652] [ 1.760434] release_card_device+0x4b/0x80 [snd] [ 1.760679] device_release+0x3b/0xa0 [ 1.760874] kobject_put+0x94/0x1b0 [ 1.761059] put_device+0x13/0x20 [ 1.761235] snd_card_free+0x61/0x90 [snd] [ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652]
Suggested-by: Takashi Iwai tiwai@suse.de Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20210321153840.378226-4-ztong0001@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/rme9652/rme9652.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c index edd765e22377..f82fa5be7d33 100644 --- a/sound/pci/rme9652/rme9652.c +++ b/sound/pci/rme9652/rme9652.c @@ -1761,7 +1761,8 @@ static int snd_rme9652_free(struct snd_rme9652 *rme9652) if (rme9652->port) pci_release_regions(rme9652->pci);
- pci_disable_device(rme9652->pci); + if (pci_is_enabled(rme9652->pci)) + pci_disable_device(rme9652->pci); return 0; }
From: Archie Pusaka apusaka@chromium.org
[ Upstream commit 3a9d54b1947ecea8eea9a902c0b7eb58a98add8a ]
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero. However, there is a flag CONF_NOT_COMPLETE which is set when creating the l2cap_chan. It is suggested that the flag should be cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults() is called, l2cap_chan is not yet ready. Therefore, we must set this flag as the default.
Example crash call trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xc4/0x118 lib/dump_stack.c:56 panic+0x1c6/0x38b kernel/panic.c:117 __warn+0x170/0x1b9 kernel/panic.c:471 warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494 debug_print_object+0x175/0x193 lib/debugobjects.c:260 debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614 debug_timer_assert_init kernel/time/timer.c:629 [inline] debug_assert_init kernel/time/timer.c:677 [inline] del_timer+0x7c/0x179 kernel/time/timer.c:1034 try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230 cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929 l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834 l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640 l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756 l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174 l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217 __sock_release+0xda/0x217 net/socket.c:580 sock_close+0x1b/0x1f net/socket.c:1039 __fput+0x322/0x55c fs/file_table.c:208 ____fput+0x17/0x19 fs/file_table.c:244 task_work_run+0x19b/0x1d3 kernel/task_work.c:115 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xe4c/0x204a kernel/exit.c:766 do_group_exit+0x291/0x291 kernel/exit.c:891 get_signal+0x749/0x1093 kernel/signal.c:2396 do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737 exit_to_usermode_loop arch/x86/entry/common.c:243 [inline] prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277 syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348 int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka apusaka@chromium.org Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com Reviewed-by: Alain Michaud alainm@chromium.org Reviewed-by: Abhishek Pandit-Subedi abhishekpandit@chromium.org Reviewed-by: Guenter Roeck groeck@chromium.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_core.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index f1ff83321023..30373d00ab04 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -510,7 +510,9 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan) chan->flush_to = L2CAP_DEFAULT_FLUSH_TO; chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO; chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO; + chan->conf_state = 0; + set_bit(CONF_NOT_COMPLETE, &chan->conf_state);
set_bit(FLAG_FORCE_ACTIVE, &chan->flags); }
From: Archie Pusaka apusaka@chromium.org
[ Upstream commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 ]
hci_chan can be created in 2 places: hci_loglink_complete_evt() if it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory, Only AMP hci_chan should be removed by a call to hci_disconn_loglink_complete_evt(). However, the controller might mess up, call that function, and destroy an hci_chan which is not initiated by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have been init'd by hci_loglink_complete_evt().
Example crash call trace: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe3/0x144 lib/dump_stack.c:118 print_address_description+0x67/0x22a mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report mm/kasan/report.c:412 [inline] kasan_report+0x251/0x28f mm/kasan/report.c:396 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline] l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline] l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline] hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Allocated by task 38: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline] l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline] hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Freed by task 1732: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free mm/kasan/kasan.c:521 [inline] __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436 slab_free mm/slub.c:3009 [inline] kfree+0x182/0x21e mm/slub.c:3972 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline] hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff8881d7af9180 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 24 bytes inside of 128-byte region [ffff8881d7af9180, ffff8881d7af9200) The buggy address belongs to the page: page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0 flags: 0x8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200 raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address: ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Archie Pusaka apusaka@chromium.org Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com Reviewed-by: Alain Michaud alainm@chromium.org Reviewed-by: Abhishek Pandit-Subedi abhishekpandit@chromium.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/hci_event.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 319572809575..6a61faf0cc79 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -526,6 +526,7 @@ struct hci_chan { struct sk_buff_head data_q; unsigned int sent; __u8 state; + bool amp; };
struct hci_conn_params { diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index b58afd2d5ebf..2e2cad58b6cc 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -4721,6 +4721,7 @@ static void hci_loglink_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) return;
hchan->handle = le16_to_cpu(ev->handle); + hchan->amp = true;
BT_DBG("hcon %p mgr %p hchan %p", hcon, hcon->amp_mgr, hchan);
@@ -4753,7 +4754,7 @@ static void hci_disconn_loglink_complete_evt(struct hci_dev *hdev, hci_dev_lock(hdev);
hchan = hci_chan_lookup_handle(hdev, le16_to_cpu(ev->handle)); - if (!hchan) + if (!hchan || !hchan->amp) goto unlock;
amp_destroy_logical_link(hchan, ev->reason);
From: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp
[ Upstream commit be8597239379f0f53c9710dd6ab551bbf535bec6 ]
syzbot is hitting "INFO: trying to register non-static key." message [1], for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when l2cap_chan_del() is called due to e.g. timeout.
Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create() immediately after "struct l2cap_chan" is allocated using kzalloc(), let's as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.
[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842
Reported-and-tested-by: syzbot syzbot+fadfba6a911f6bf71842@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_core.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 30373d00ab04..c0d64b4144d4 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -445,6 +445,8 @@ struct l2cap_chan *l2cap_chan_create(void) if (!chan) return NULL;
+ skb_queue_head_init(&chan->tx_q); + skb_queue_head_init(&chan->srej_q); mutex_init(&chan->lock);
/* Set default lock nesting level */
From: Nikolay Aleksandrov nikolay@nvidia.com
[ Upstream commit 0353b4a96b7a9f60fe20d1b3ebd4931a4085f91c ]
Recently we had an interop issue where RARP packets got suppressed with bridge neigh suppression enabled, but the check in the code was meant to suppress GARP. Exclude RARP packets from it which would allow some VMWare setups to work, to quote the report: "Those RARP packets usually get generated by vMware to notify physical switches when vMotion occurs. vMware may use random sip/tip or just use sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep and other times get dropped by the logic"
Reported-by: Amer Abdalamer amer@nvidia.com Signed-off-by: Nikolay Aleksandrov nikolay@nvidia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/br_arp_nd_proxy.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/bridge/br_arp_nd_proxy.c b/net/bridge/br_arp_nd_proxy.c index eb44ae05abaa..b52e70362268 100644 --- a/net/bridge/br_arp_nd_proxy.c +++ b/net/bridge/br_arp_nd_proxy.c @@ -158,7 +158,9 @@ void br_do_proxy_suppress_arp(struct sk_buff *skb, struct net_bridge *br, if (br->neigh_suppress_enabled) { if (p && (p->flags & BR_NEIGH_SUPPRESS)) return; - if (ipv4_is_zeronet(sip) || sip == tip) { + if (parp->ar_op != htons(ARPOP_RREQUEST) && + parp->ar_op != htons(ARPOP_RREPLY) && + (ipv4_is_zeronet(sip) || sip == tip)) { /* prevent flooding to neigh suppress ports */ BR_INPUT_SKB_CB(skb)->proxyarp_replied = true; return;
From: Archie Pusaka apusaka@chromium.org
[ Upstream commit 3af70b39fa2d415dc86c370e5b24ddb9fdacbd6f ]
There is a possibility of receiving a zapped sock on l2cap_sock_connect(). This could lead to interesting crashes, one such case is tearing down an already tore l2cap_sock as is happened with this call trace:
__dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xc4/0x118 lib/dump_stack.c:56 register_lock_class kernel/locking/lockdep.c:792 [inline] register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742 __lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105 lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline] _raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:307 [inline] lock_sock_nested+0x44/0xfa net/core/sock.c:2518 l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345 l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598 l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756 l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429 process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064 worker_thread+0x5a5/0x773 kernel/workqueue.c:2196 kthread+0x291/0x2a6 kernel/kthread.c:211 ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604
Signed-off-by: Archie Pusaka apusaka@chromium.org Reported-by: syzbot+abfc0f5e668d4099af73@syzkaller.appspotmail.com Reviewed-by: Alain Michaud alainm@chromium.org Reviewed-by: Abhishek Pandit-Subedi abhishekpandit@chromium.org Reviewed-by: Guenter Roeck groeck@chromium.org Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_sock.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 198a1fdd6709..967a9bb14415 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -179,9 +179,17 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, struct l2cap_chan *chan = l2cap_pi(sk)->chan; struct sockaddr_l2 la; int len, err = 0; + bool zapped;
BT_DBG("sk %p", sk);
+ lock_sock(sk); + zapped = sock_flag(sk, SOCK_ZAPPED); + release_sock(sk); + + if (zapped) + return -EINVAL; + if (!addr || alen < offsetofend(struct sockaddr, sa_family) || addr->sa_family != AF_BLUETOOTH) return -EINVAL;
From: Eric Dumazet edumazet@google.com
[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also do a dev_hold() in its ndo_init(), only when ndo_init() is returning 0.
Otherwise, register_netdevice() would call ndo_uninit() in its error path and release a refcount too soon.
Therefore, we need to move dev_hold() call from vti6_tnl_create2() to vti6_dev_init_gen()
[1] WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31 Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58 RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568 R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40 FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] dev_put include/linux/netdevice.h:4135 [inline] vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297 register_netdevice+0xadf/0x1500 net/core/dev.c:10308 vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190 vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x331/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmmsg+0x195/0x470 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/ip6_vti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index 94f16e82a458..defa04b38ee8 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -196,7 +196,6 @@ static int vti6_tnl_create2(struct net_device *dev)
strcpy(t->parms.name, dev->name);
- dev_hold(dev); vti6_tnl_link(ip6n, t);
return 0; @@ -925,6 +924,7 @@ static inline int vti6_dev_init_gen(struct net_device *dev) dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats); if (!dev->tstats) return -ENOMEM; + dev_hold(dev); return 0; }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 875c40eadf6ac6644c0f71842a4f30dd9968d281 ]
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its jack-detect connected to JD2_IN4N, instead of using the default IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/boards/bytcr_rt5640.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 62b4187e9f44..4ebc023f1507 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -509,6 +509,23 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + /* Chuwi Hi8 (CWI509) */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"), + DMI_MATCH(DMI_SYS_VENDOR, "ilife"), + DMI_MATCH(DMI_PRODUCT_NAME, "S806"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
From: Bence Csókás bence98@sch.bme.hu
[ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ]
This quirk signifies that the adapter cannot do a repeated START, it always issues a STOP condition after transfers.
Suggested-by: Wolfram Sang wsa@kernel.org Signed-off-by: Bence Csókás bence98@sch.bme.hu Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/i2c.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 7e748648c7d3..6fda0458745d 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -662,6 +662,8 @@ struct i2c_adapter_quirks { #define I2C_AQ_NO_ZERO_LEN_READ BIT(5) #define I2C_AQ_NO_ZERO_LEN_WRITE BIT(6) #define I2C_AQ_NO_ZERO_LEN (I2C_AQ_NO_ZERO_LEN_READ | I2C_AQ_NO_ZERO_LEN_WRITE) +/* adapter cannot do repeated START */ +#define I2C_AQ_NO_REP_START BIT(7)
/* * i2c_adapter is the structure used to identify a physical i2c bus along
From: Emmanuel Grumbach emmanuel.grumbach@intel.com
[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]
After channel switch, we should consider any beacon with a CSA IE as a new switch. If the CSA IE is a leftover from before the switch that the AP forgot to remove, we'll get a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon with a CSA-to-Self with mode = 1 on the new channel after a switch. The firmware considered this a new switch and closed its queues. Since the beacon didn't change between before and after the switch, we wouldn't handle it (the CRC is the same) and we wouldn't let the firmware open its queues again or disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf6... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/mlme.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c53a332f7d65..cbcb60face2c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1185,6 +1185,11 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
sdata->vif.csa_active = false; ifmgd->csa_waiting_bcn = false; + /* + * If the CSA IE is still present on the beacon after the switch, + * we need to consider it as a new CSA (possibly to self). + */ + ifmgd->beacon_crc_valid = false;
ret = drv_post_channel_switch(sdata); if (ret) {
From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com
[ Upstream commit fa0c10a5f3a49130dd11281aa27e7e1c8654abc7 ]
The Special Function Registers on all Exynos SoC, including ARM64, are 32-bit wide, so entire driver uses matching functions like readl() or writel(). On 64-bit ARM using unsigned long for register masks: 1. makes little sense as immediately after bitwise operation it will be cast to 32-bit value when calling writel(), 2. is actually error-prone because it might promote other operands to 64-bit.
Addresses-Coverity: Unintentional integer overflow Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Reviewed-by: Sylwester Nawrocki s.nawrocki@samsung.com Link: https://lore.kernel.org/r/20210408195029.69974-1-krzysztof.kozlowski@canonic... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/samsung/pinctrl-exynos.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c index 24956f6c6324..7f764f751c4f 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c @@ -55,7 +55,7 @@ static void exynos_irq_mask(struct irq_data *irqd) struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset; - unsigned long mask; + unsigned int mask; unsigned long flags;
spin_lock_irqsave(&bank->slock, flags); @@ -83,7 +83,7 @@ static void exynos_irq_unmask(struct irq_data *irqd) struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip); struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset; - unsigned long mask; + unsigned int mask; unsigned long flags;
/* @@ -482,7 +482,7 @@ static void exynos_irq_eint0_15(struct irq_desc *desc) chained_irq_exit(chip, desc); }
-static inline void exynos_irq_demux_eint(unsigned long pend, +static inline void exynos_irq_demux_eint(unsigned int pend, struct irq_domain *domain) { unsigned int irq; @@ -499,8 +499,8 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); struct exynos_muxed_weint_data *eintd = irq_desc_get_handler_data(desc); - unsigned long pend; - unsigned long mask; + unsigned int pend; + unsigned int mask; int i;
chained_irq_enter(chip, desc);
From: Miklos Szeredi mszeredi@redhat.com
[ Upstream commit 8217673d07256b22881127bf50dce874d0e51653 ]
For cloned connections cuse_channel_release() will be called more than once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point, and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi mszeredi@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fuse/cuse.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index f057c213c453..e10e2b62ccf4 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -621,6 +621,8 @@ static int __init cuse_init(void) cuse_channel_fops.owner = THIS_MODULE; cuse_channel_fops.open = cuse_channel_open; cuse_channel_fops.release = cuse_channel_release; + /* CUSE is not prepared for FUSE_DEV_IOC_CLONE */ + cuse_channel_fops.unlocked_ioctl = NULL;
cuse_class = class_create(THIS_MODULE, "cuse"); if (IS_ERR(cuse_class))
From: Yonghong Song yhs@fb.com
[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]
selftests/bpf/Makefile includes lib.mk. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song yhs@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: Andrii Nakryiko andrii@kernel.org Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/lib.mk | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 0ef203ec59fd..a5d40653a921 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -1,6 +1,10 @@ # This mimics the top-level Makefile. We do it explicitly here so that this # Makefile can operate with or without the kbuild infrastructure. +ifneq ($(LLVM),) +CC := clang +else CC := $(CROSS_COMPILE)gcc +endif
ifeq (0,$(MAKELEVEL)) OUTPUT := $(shell pwd)
From: Mihai Moldovan ionic@ionic.de
[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ]
If the user selects the very first entry in a page and performs a search-up operation, or selects the very last entry in a page and performs a search-down operation that will not succeed (e.g., via [/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1 or n, which is then translated into (n - 1) (i.e., the last entry of the page) or 0 (i.e., the first entry of the page) and finally the search begins. This continues to work fine until the index reaches 0 or (n - 1), at which point it will be decremented to -1 or incremented to n, but not checked against the starting point right away. Instead, it's wrapped around to the bottom or top again, after which the starting point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping the running index variable around, but Masahiro Yamada pointed out that the actual issue is that the comparison point (starting point) exceeds bounds (i.e., the [0,n-1] interval) in the first place and that, instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the starting point was n while searching down, which also lead to an infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan ionic@ionic.de Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/nconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c index c8ff1c99dd5c..552cf7557c7a 100644 --- a/scripts/kconfig/nconf.c +++ b/scripts/kconfig/nconf.c @@ -504,8 +504,8 @@ static int get_mext_match(const char *match_str, match_f flag) else if (flag == FIND_NEXT_MATCH_UP) --match_start;
+ match_start = (match_start + items_num) % items_num; index = match_start; - index = (index + items_num) % items_num; while (true) { char *str = k_menu_items[index].str; if (strcasestr(str, match_str) != NULL)
From: "Gustavo A. R. Silva" gustavoars@kernel.org
[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot lkp@intel.com Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Reviewed-by: Kees Cook keescook@chromium.org Acked-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/sm_make_chunk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index ce6053be60bc..dc51e14f568e 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -3148,7 +3148,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc, * primary. */ if (af->is_any(&addr)) - memcpy(&addr.v4, sctp_source(asconf), sizeof(addr)); + memcpy(&addr, sctp_source(asconf), sizeof(addr));
if (security_sctp_bind_connect(asoc->ep->base.sk, SCTP_PARAM_SET_PRIMARY,
From: Srikar Dronamraju srikar@linux.vnet.ibm.com
[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ]
Geethika reported a trace when doing a dlpar CPU add.
------------[ cut here ]------------ WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057 CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5 Workqueue: events cpuset_hotplug_workfn NIP: c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420 REGS: c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28828422 XER: 00000020 CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10 c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04: c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018 #012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000 c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80 0000000000000497 0000000000000004 #012GPR16: c00000000347a258 0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20: c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3 #012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030 c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280 c0000034aefe0b00 c0000000010a2a68 NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500 LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 Call Trace: [c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable) [c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530 [c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0 [c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70 [c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20 [c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670 [c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520 [c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0 [c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70 Instruction dump: 7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78 3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0 ---[ end trace 532d9066d3d4d7ec ]---
Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated correctly before its used in setting the masks. Setting the numa_node will ensure that when cpu_cpu_mask() gets called, the correct node number is used. This code movement helped fix the above call trace.
Reported-by: Geetika Moolchandani Geetika.Moolchandani1@ibm.com Signed-off-by: Srikar Dronamraju srikar@linux.vnet.ibm.com Reviewed-by: Nathan Lynch nathanl@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20210401154200.150077-1-srikar@linux.vnet.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/smp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 6dc43205382b..a9ec4467705c 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -1032,6 +1032,9 @@ void start_secondary(void *unused)
vdso_getcpu_init(); #endif + set_numa_node(numa_cpu_lookup_table[cpu]); + set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu])); + /* Update topology CPU masks */ add_cpu_to_masks(cpu);
@@ -1042,9 +1045,6 @@ void start_secondary(void *unused) if (!cpumask_equal(cpu_l2_cache_mask(cpu), cpu_sibling_mask(cpu))) shared_caches = true;
- set_numa_node(numa_cpu_lookup_table[cpu]); - set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu])); - smp_wmb(); notify_cpu_starting(cpu); set_cpu_online(cpu, true);
From: David Ward david.ward@gatech.edu
[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350 and Venue 11 Pro 7140. They require the same handling for the combo jack to work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028 (Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961 Signed-off-by: David Ward david.ward@gatech.edu Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt286.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 0b0f748bffbe..7e44ccae3bc8 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -1118,12 +1118,11 @@ static const struct dmi_system_id force_combo_jack_table[] = { { } };
-static const struct dmi_system_id dmi_dell_dino[] = { +static const struct dmi_system_id dmi_dell[] = { { - .ident = "Dell Dino", + .ident = "Dell", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343") } }, { } @@ -1134,7 +1133,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, { struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev); struct rt286_priv *rt286; - int i, ret, val; + int i, ret, vendor_id;
rt286 = devm_kzalloc(&i2c->dev, sizeof(*rt286), GFP_KERNEL); @@ -1150,14 +1149,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c, }
ret = regmap_read(rt286->regmap, - RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val); + RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id); if (ret != 0) { dev_err(&i2c->dev, "I2C error %d\n", ret); return ret; } - if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) { + if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) { dev_err(&i2c->dev, - "Device with ID register %#x is not rt286\n", val); + "Device with ID register %#x is not rt286\n", + vendor_id); return -ENODEV; }
@@ -1181,8 +1181,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (pdata) rt286->pdata = *pdata;
- if (dmi_check_system(force_combo_jack_table) || - dmi_check_system(dmi_dell_dino)) + if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) || + dmi_check_system(force_combo_jack_table)) rt286->pdata.cbj_en = true;
regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3); @@ -1221,7 +1221,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737); regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
- if (dmi_check_system(dmi_dell_dino)) { + if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) { regmap_update_bits(rt286->regmap, RT286_SET_GPIO_MASK, 0x40, 0x40); regmap_update_bits(rt286->regmap,
From: "Gustavo A. R. Silva" gustavoars@kernel.org
[ Upstream commit c1d9e34e11281a8ba1a1c54e4db554232a461488 ]
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a some struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &link_usettings.base. Fix this by directly using &link_usettings and _from_ as destination and source addresses, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot lkp@intel.com Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 1011625a0ca4..83028017c26d 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -618,7 +618,7 @@ store_link_ksettings_for_user(void __user *to, { struct ethtool_link_usettings link_usettings;
- memcpy(&link_usettings.base, &from->base, sizeof(link_usettings)); + memcpy(&link_usettings, from, sizeof(link_usettings)); bitmap_to_arr32(link_usettings.link_modes.supported, from->link_modes.supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
From: Yaqi Chen chendotjs@gmail.com
[ Upstream commit 137733d08f4ab14a354dacaa9a8fc35217747605 ]
From commit c0bbbdc32feb ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core has changed to reference of a skb pointer.
This commit fixes by using bpf_probe_read_kernel.
Signed-off-by: Yaqi Chen chendotjs@gmail.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: Yonghong Song yhs@fb.com Link: https://lore.kernel.org/bpf/20210416154803.37157-1-chendotjs@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- samples/bpf/tracex1_kern.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/samples/bpf/tracex1_kern.c b/samples/bpf/tracex1_kern.c index 107da148820f..9c74b45c5720 100644 --- a/samples/bpf/tracex1_kern.c +++ b/samples/bpf/tracex1_kern.c @@ -20,7 +20,7 @@ SEC("kprobe/__netif_receive_skb_core") int bpf_prog1(struct pt_regs *ctx) { - /* attaches to kprobe netif_receive_skb, + /* attaches to kprobe __netif_receive_skb_core, * looks for packets on loobpack device and prints them */ char devname[IFNAMSIZ]; @@ -29,7 +29,7 @@ int bpf_prog1(struct pt_regs *ctx) int len;
/* non-portable! works for the given kernel only */ - skb = (struct sk_buff *) PT_REGS_PARM1(ctx); + bpf_probe_read_kernel(&skb, sizeof(skb), (void *)PT_REGS_PARM1(ctx)); dev = _(skb->dev); len = _(skb->len);
From: Michael Ellerman mpe@ellerman.id.au
[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ]
RCU complains about us calling printk() from an offline CPU:
============================= WARNING: suspicious RCU usage 5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted ----------------------------- kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU! rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0.
stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1 Call Trace: dump_stack+0xec/0x144 (unreliable) lockdep_rcu_suspicious+0x124/0x144 __lock_acquire+0x1098/0x28b0 lock_acquire+0x128/0x600 _raw_spin_lock_irqsave+0x6c/0xc0 down_trylock+0x2c/0x70 __down_trylock_console_sem+0x60/0x140 vprintk_emit+0x1a8/0x4b0 vprintk_func+0xcc/0x200 printk+0x40/0x54 pseries_cpu_offline_self+0xc0/0x120 arch_cpu_idle_dead+0x54/0x70 do_idle+0x174/0x4a0 cpu_startup_entry+0x38/0x40 rest_init+0x268/0x388 start_kernel+0x748/0x790 start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are already offline. In addition the message can be spammy, and is not that helpful for users, so remove it.
Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 1d3f9313c02f..8bfb97d07d10 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -95,9 +95,6 @@ static void rtas_stop_self(void)
BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
- printk("cpu %u (hwid %u) Ready to die...\n", - smp_processor_id(), hard_smp_processor_id()); - rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL);
panic("Alas, I survived.\n");
From: "Gustavo A. R. Silva" gustavoars@kernel.org
[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]
Fix the following out-of-bounds warnings by enclosing structure members daddr and saddr into new struct addr, in structures wl3501_md_req and wl3501_md_ind:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o struct wl3501_md_req { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 routing; /* 3 1 */ u16 data; /* 4 2 */ u16 size; /* 6 2 */ u8 pri; /* 8 1 */ u8 service_class; /* 9 1 */ struct { u8 daddr[6]; /* 10 6 */ u8 saddr[6]; /* 16 6 */ } addr; /* 10 12 */
/* size: 22, cachelines: 1, members: 8 */ /* last cacheline: 22 bytes */ };
$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o struct wl3501_md_ind { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 routing; /* 3 1 */ u16 data; /* 4 2 */ u16 size; /* 6 2 */ u8 reception; /* 8 1 */ u8 pri; /* 9 1 */ u8 service_class; /* 10 1 */ struct { u8 daddr[6]; /* 11 6 */ u8 saddr[6]; /* 17 6 */ } addr; /* 11 12 */
/* size: 24, cachelines: 1, members: 9 */ /* padding: 1 */ /* last cacheline: 24 bytes */ };
The problem is that the original code is trying to copy data into a couple of arrays adjacent to each other in a single call to memcpy(). Now that a new struct _addr_ enclosing those two adjacent arrays is introduced, memcpy() doesn't overrun the length of &sig.daddr[0] and &sig.daddr, because the address of the new struct object _addr_ is used, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot lkp@intel.com Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.161844226... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/wl3501.h | 12 ++++++++---- drivers/net/wireless/wl3501_cs.c | 10 ++++++---- 2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h index efdce9ae36ea..077a934ae3b5 100644 --- a/drivers/net/wireless/wl3501.h +++ b/drivers/net/wireless/wl3501.h @@ -471,8 +471,10 @@ struct wl3501_md_req { u16 size; u8 pri; u8 service_class; - u8 daddr[ETH_ALEN]; - u8 saddr[ETH_ALEN]; + struct { + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; + } addr; };
struct wl3501_md_ind { @@ -484,8 +486,10 @@ struct wl3501_md_ind { u8 reception; u8 pri; u8 service_class; - u8 daddr[ETH_ALEN]; - u8 saddr[ETH_ALEN]; + struct { + u8 daddr[ETH_ALEN]; + u8 saddr[ETH_ALEN]; + } addr; };
struct wl3501_md_confirm { diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index da62220b9c01..0019b01145ba 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -468,6 +468,7 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len) struct wl3501_md_req sig = { .sig_id = WL3501_SIG_MD_REQ, }; + size_t sig_addr_len = sizeof(sig.addr); u8 *pdata = (char *)data; int rc = -EIO;
@@ -483,9 +484,9 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len) goto out; } rc = 0; - memcpy(&sig.daddr[0], pdata, 12); - pktlen = len - 12; - pdata += 12; + memcpy(&sig.addr, pdata, sig_addr_len); + pktlen = len - sig_addr_len; + pdata += sig_addr_len; sig.data = bf; if (((*pdata) * 256 + (*(pdata + 1))) > 1500) { u8 addr4[ETH_ALEN] = { @@ -979,7 +980,8 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev, } else { skb->dev = dev; skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */ - skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12); + skb_copy_to_linear_data(skb, (unsigned char *)&sig.addr, + sizeof(sig.addr)); wl3501_receive(this, skb->data, pkt_len); skb_put(skb, pkt_len); skb->protocol = eth_type_trans(skb, dev);
From: "Gustavo A. R. Silva" gustavoars@kernel.org
[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]
Fix the following out-of-bounds warnings by adding a new structure wl3501_req instead of duplicating the same members in structure wl3501_join_req and wl3501_scan_confirm:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o struct wl3501_req { u16 beacon_period; /* 0 2 */ u16 dtim_period; /* 2 2 */ u16 cap_info; /* 4 2 */ u8 bss_type; /* 6 1 */ u8 bssid[6]; /* 7 6 */ struct iw_mgmt_essid_pset ssid; /* 13 34 */ struct iw_mgmt_ds_pset ds_pset; /* 47 3 */ struct iw_mgmt_cf_pset cf_pset; /* 50 8 */ struct iw_mgmt_ibss_pset ibss_pset; /* 58 4 */ struct iw_mgmt_data_rset bss_basic_rset; /* 62 10 */
/* size: 72, cachelines: 2, members: 10 */ /* last cacheline: 8 bytes */ };
$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o struct wl3501_join_req { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 reserved; /* 3 1 */ struct iw_mgmt_data_rset operational_rset; /* 4 10 */ u16 reserved2; /* 14 2 */ u16 timeout; /* 16 2 */ u16 probe_delay; /* 18 2 */ u8 timestamp[8]; /* 20 8 */ u8 local_time[8]; /* 28 8 */ struct wl3501_req req; /* 36 72 */
/* size: 108, cachelines: 2, members: 10 */ /* last cacheline: 44 bytes */ };
$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o struct wl3501_scan_confirm { u16 next_blk; /* 0 2 */ u8 sig_id; /* 2 1 */ u8 reserved; /* 3 1 */ u16 status; /* 4 2 */ char timestamp[8]; /* 6 8 */ char localtime[8]; /* 14 8 */ struct wl3501_req req; /* 22 72 */ /* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */ u8 rssi; /* 94 1 */
/* size: 96, cachelines: 2, members: 8 */ /* padding: 1 */ /* last cacheline: 32 bytes */ };
The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). Now that a new struct wl3501_req enclosing all those adjacent members is introduced, memcpy() doesn't overrun the length of &sig.beacon_period and &this->bss_set[i].beacon_period, because the address of the new struct object _req_ is used as the destination, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().
Link: https://github.com/KSPP/linux/issues/109 Reported-by: kernel test robot lkp@intel.com Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Reviewed-by: Kees Cook keescook@chromium.org Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.161844226... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/wl3501.h | 35 +++++++++++-------------- drivers/net/wireless/wl3501_cs.c | 44 +++++++++++++++++--------------- 2 files changed, 38 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h index 077a934ae3b5..a10ee5a68012 100644 --- a/drivers/net/wireless/wl3501.h +++ b/drivers/net/wireless/wl3501.h @@ -379,16 +379,7 @@ struct wl3501_get_confirm { u8 mib_value[100]; };
-struct wl3501_join_req { - u16 next_blk; - u8 sig_id; - u8 reserved; - struct iw_mgmt_data_rset operational_rset; - u16 reserved2; - u16 timeout; - u16 probe_delay; - u8 timestamp[8]; - u8 local_time[8]; +struct wl3501_req { u16 beacon_period; u16 dtim_period; u16 cap_info; @@ -401,6 +392,19 @@ struct wl3501_join_req { struct iw_mgmt_data_rset bss_basic_rset; };
+struct wl3501_join_req { + u16 next_blk; + u8 sig_id; + u8 reserved; + struct iw_mgmt_data_rset operational_rset; + u16 reserved2; + u16 timeout; + u16 probe_delay; + u8 timestamp[8]; + u8 local_time[8]; + struct wl3501_req req; +}; + struct wl3501_join_confirm { u16 next_blk; u8 sig_id; @@ -443,16 +447,7 @@ struct wl3501_scan_confirm { u16 status; char timestamp[8]; char localtime[8]; - u16 beacon_period; - u16 dtim_period; - u16 cap_info; - u8 bss_type; - u8 bssid[ETH_ALEN]; - struct iw_mgmt_essid_pset ssid; - struct iw_mgmt_ds_pset ds_pset; - struct iw_mgmt_cf_pset cf_pset; - struct iw_mgmt_ibss_pset ibss_pset; - struct iw_mgmt_data_rset bss_basic_rset; + struct wl3501_req req; u8 rssi; };
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 0019b01145ba..f33ece937047 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -589,7 +589,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas) struct wl3501_join_req sig = { .sig_id = WL3501_SIG_JOIN_REQ, .timeout = 10, - .ds_pset = { + .req.ds_pset = { .el = { .id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET, .len = 1, @@ -598,7 +598,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas) }, };
- memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72); + memcpy(&sig.req, &this->bss_set[stas].req, sizeof(sig.req)); return wl3501_esbq_exec(this, &sig, sizeof(sig)); }
@@ -666,35 +666,37 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) if (sig.status == WL3501_STATUS_SUCCESS) { pr_debug("success"); if ((this->net_type == IW_MODE_INFRA && - (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) || + (sig.req.cap_info & WL3501_MGMT_CAPABILITY_ESS)) || (this->net_type == IW_MODE_ADHOC && - (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) || + (sig.req.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) || this->net_type == IW_MODE_AUTO) { if (!this->essid.el.len) matchflag = 1; else if (this->essid.el.len == 3 && !memcmp(this->essid.essid, "ANY", 3)) matchflag = 1; - else if (this->essid.el.len != sig.ssid.el.len) + else if (this->essid.el.len != sig.req.ssid.el.len) matchflag = 0; - else if (memcmp(this->essid.essid, sig.ssid.essid, + else if (memcmp(this->essid.essid, sig.req.ssid.essid, this->essid.el.len)) matchflag = 0; else matchflag = 1; if (matchflag) { for (i = 0; i < this->bss_cnt; i++) { - if (ether_addr_equal_unaligned(this->bss_set[i].bssid, sig.bssid)) { + if (ether_addr_equal_unaligned(this->bss_set[i].req.bssid, + sig.req.bssid)) { matchflag = 0; break; } } } if (matchflag && (i < 20)) { - memcpy(&this->bss_set[i].beacon_period, - &sig.beacon_period, 73); + memcpy(&this->bss_set[i].req, + &sig.req, sizeof(sig.req)); this->bss_cnt++; this->rssi = sig.rssi; + this->bss_set[i].rssi = sig.rssi; } } } else if (sig.status == WL3501_STATUS_TIMEOUT) { @@ -886,19 +888,19 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr) if (this->join_sta_bss < this->bss_cnt) { const int i = this->join_sta_bss; memcpy(this->bssid, - this->bss_set[i].bssid, ETH_ALEN); - this->chan = this->bss_set[i].ds_pset.chan; + this->bss_set[i].req.bssid, ETH_ALEN); + this->chan = this->bss_set[i].req.ds_pset.chan; iw_copy_mgmt_info_element(&this->keep_essid.el, - &this->bss_set[i].ssid.el); + &this->bss_set[i].req.ssid.el); wl3501_mgmt_auth(this); } } else { const int i = this->join_sta_bss;
- memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN); - this->chan = this->bss_set[i].ds_pset.chan; + memcpy(&this->bssid, &this->bss_set[i].req.bssid, ETH_ALEN); + this->chan = this->bss_set[i].req.ds_pset.chan; iw_copy_mgmt_info_element(&this->keep_essid.el, - &this->bss_set[i].ssid.el); + &this->bss_set[i].req.ssid.el); wl3501_online(dev); } } else { @@ -1576,30 +1578,30 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, for (i = 0; i < this->bss_cnt; ++i) { iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN); + memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].req.bssid, ETH_ALEN); current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN); iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - iwe.u.data.length = this->bss_set[i].ssid.el.len; + iwe.u.data.length = this->bss_set[i].req.ssid.el.len; current_ev = iwe_stream_add_point(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, - this->bss_set[i].ssid.essid); + this->bss_set[i].req.ssid.essid); iwe.cmd = SIOCGIWMODE; - iwe.u.mode = this->bss_set[i].bss_type; + iwe.u.mode = this->bss_set[i].req.bss_type; current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = this->bss_set[i].ds_pset.chan; + iwe.u.freq.m = this->bss_set[i].req.ds_pset.chan; iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(info, current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN); iwe.cmd = SIOCGIWENCODE; - if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY) + if (this->bss_set[i].req.cap_info & WL3501_MGMT_CAPABILITY_PRIVACY) iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; else iwe.u.data.flags = IW_ENCODE_DISABLED;
From: Alexey Kardashevskiy aik@ozlabs.ru
[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]
The IOMMU table is divided into pools for concurrent mappings and each pool has a separate spinlock. When taking the ownership of an IOMMU group to pass through a device to a VM, we lock these spinlocks which triggers a false negative warning in lockdep (below).
This fixes it by annotating the large pool's spinlock as a nest lock which makes lockdep not complaining when locking nested locks if the nest lock is locked already.
=== WARNING: possible recursive locking detected 5.11.0-le_syzkaller_a+fstn1 #100 Not tainted -------------------------------------------- qemu-system-ppc/4129 is trying to acquire lock: c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
but task is already holding lock: c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
other info that might help us debug this: Possible unsafe locking scenario:
CPU0 ---- lock(&(p->lock)/1); lock(&(p->lock)/1); ===
Signed-off-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index f0dc680e659a..c3d2d5cd7c10 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -1030,7 +1030,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags); for (i = 0; i < tbl->nr_pools; i++) - spin_lock(&tbl->pools[i].lock); + spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
if (tbl->it_offset == 0) clear_bit(0, tbl->it_map); @@ -1059,7 +1059,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags); for (i = 0; i < tbl->nr_pools; i++) - spin_lock(&tbl->pools[i].lock); + spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
memset(tbl->it_map, 0, sz);
From: Felix Fietkau nbd@nbd.name
[ Upstream commit 3f57d8c40fea9b20543cab4da12f4680d2ef182c ]
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is set. Fixes frames wrongly marked with VLAN tags.
Signed-off-by: Felix Fietkau nbd@nbd.name [Ilya: fix commit message] Signed-off-by: Ilya Lipnitskiy ilya.lipnitskiy@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index b72a4fad7bc8..59f3dce3ab1d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1041,7 +1041,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, skb->protocol = eth_type_trans(skb, netdev);
if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX && - RX_DMA_VID(trxd.rxd3)) + (trxd.rxd2 & RX_DMA_VTAG)) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), RX_DMA_VID(trxd.rxd3)); skb_record_rx_queue(skb, 0); diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 46819297fc3e..cb6b27861afa 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -285,6 +285,7 @@ #define RX_DMA_DONE BIT(31) #define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16) #define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff) +#define RX_DMA_VTAG BIT(15)
/* QDMA descriptor rxd3 */ #define RX_DMA_VID(_x) ((_x) & 0xfff)
From: Sergei Trofimovich slyfox@gentoo.org
[ Upstream commit 99e729bd40fb3272fa4b0140839d5e957b58588a ]
Noticed failure as a crash on ia64 when tried to symbolize all backtraces collected by page_owner=on:
$ cat /sys/kernel/debug/page_owner <oops>
CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226 Hardware name: hp server rx3600, BIOS 04.03 04/08/2008 ip is at dereference_module_function_descriptor+0x41/0x100
Crash happens at dereference_module_function_descriptor() due to use-after-free when dereferencing ".opd" section header.
All section headers are already freed after module is laoded successfully.
To keep symbolizer working the change stores ".opd" address and size after module is relocated to a new place and before section headers are discarded.
To make similar errors less obscure module_finalize() now zeroes out all variables relevant to module loading only.
Link: https://lkml.kernel.org/r/20210403074803.3309096-1-slyfox@gentoo.org Signed-off-by: Sergei Trofimovich slyfox@gentoo.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/ia64/include/asm/module.h | 6 +++++- arch/ia64/kernel/module.c | 29 +++++++++++++++++++++++++---- 2 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h index f319144260ce..9fbf32e6e881 100644 --- a/arch/ia64/include/asm/module.h +++ b/arch/ia64/include/asm/module.h @@ -14,16 +14,20 @@ struct elf64_shdr; /* forward declration */
struct mod_arch_specific { + /* Used only at module load time. */ struct elf64_shdr *core_plt; /* core PLT section */ struct elf64_shdr *init_plt; /* init PLT section */ struct elf64_shdr *got; /* global offset table */ struct elf64_shdr *opd; /* official procedure descriptors */ struct elf64_shdr *unwind; /* unwind-table section */ unsigned long gp; /* global-pointer for module */ + unsigned int next_got_entry; /* index of next available got entry */
+ /* Used at module run and cleanup time. */ void *core_unw_table; /* core unwind-table cookie returned by unwinder */ void *init_unw_table; /* init unwind-table cookie returned by unwinder */ - unsigned int next_got_entry; /* index of next available got entry */ + void *opd_addr; /* symbolize uses .opd to get to actual function */ + unsigned long opd_size; };
#define MODULE_PROC_FAMILY "ia64" diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 1a42ba885188..ee693c8cec49 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -905,9 +905,31 @@ register_unwind_table (struct module *mod) int module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + struct mod_arch_specific *mas = &mod->arch; + DEBUGP("%s: init: entry=%p\n", __func__, mod->init); - if (mod->arch.unwind) + if (mas->unwind) register_unwind_table(mod); + + /* + * ".opd" was already relocated to the final destination. Store + * it's address for use in symbolizer. + */ + mas->opd_addr = (void *)mas->opd->sh_addr; + mas->opd_size = mas->opd->sh_size; + + /* + * Module relocation was already done at this point. Section + * headers are about to be deleted. Wipe out load-time context. + */ + mas->core_plt = NULL; + mas->init_plt = NULL; + mas->got = NULL; + mas->opd = NULL; + mas->unwind = NULL; + mas->gp = 0; + mas->next_got_entry = 0; + return 0; }
@@ -926,10 +948,9 @@ module_arch_cleanup (struct module *mod)
void *dereference_module_function_descriptor(struct module *mod, void *ptr) { - Elf64_Shdr *opd = mod->arch.opd; + struct mod_arch_specific *mas = &mod->arch;
- if (ptr < (void *)opd->sh_addr || - ptr >= (void *)(opd->sh_addr + opd->sh_size)) + if (ptr < mas->opd_addr || ptr >= mas->opd_addr + mas->opd_size) return ptr;
return dereference_function_descriptor(ptr);
linux-stable-mirror@lists.linaro.org