On Galaxy S3 (i9300/i9305), which has the max17047 fuel gauge and no current sense resistor (rsns), the RepSOC register does not provide an accurate state of charge value. The reported value is wrong, and does not change over time. VFSOC however, which uses the voltage fuel gauge to determine the state of charge, always shows an accurate value.
For devices without current sense, VFSOC is already used for the soc-alert (0x0003 is written to MiscCFG register), so with this change the source of the alert and the PROP_CAPACITY value match.
Fixes: 359ab9f5b154 ("power_supply: Add MAX17042 Fuel Gauge Driver") Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Suggested-by: Wolfgang Wiedmeyer wolfgit@wiedmeyer.de Signed-off-by: Henrik Grimler henrik@grimler.se --- Changes in v2: Re-write commit message to highlight that VFSOC is already used for alert, after Krzysztof's comments --- drivers/power/supply/max17042_battery.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 8dffae76b6a3..5809ba997093 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -313,7 +313,10 @@ static int max17042_get_property(struct power_supply *psy, val->intval = data * 625 / 8; break; case POWER_SUPPLY_PROP_CAPACITY: - ret = regmap_read(map, MAX17042_RepSOC, &data); + if (chip->pdata->enable_current_sense) + ret = regmap_read(map, MAX17042_RepSOC, &data); + else + ret = regmap_read(map, MAX17042_VFSOC, &data); if (ret < 0) return ret;
base-commit: 5816b3e6577eaa676ceb00a848f0fd65fe2adc29
Hi,
On 9/29/21 8:14 PM, Henrik Grimler wrote:
On Galaxy S3 (i9300/i9305), which has the max17047 fuel gauge and no current sense resistor (rsns), the RepSOC register does not provide an accurate state of charge value. The reported value is wrong, and does not change over time. VFSOC however, which uses the voltage fuel gauge to determine the state of charge, always shows an accurate value.
For devices without current sense, VFSOC is already used for the soc-alert (0x0003 is written to MiscCFG register), so with this change the source of the alert and the PROP_CAPACITY value match.
Fixes: 359ab9f5b154 ("power_supply: Add MAX17042 Fuel Gauge Driver") Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Suggested-by: Wolfgang Wiedmeyer wolfgit@wiedmeyer.de Signed-off-by: Henrik Grimler henrik@grimler.se
Changes in v2: Re-write commit message to highlight that VFSOC is already used for alert, after Krzysztof's comments
Thanks, both patches looks good to me:
Reviewed-by: Hans de Goede hdegoede@redhat.com
for the series.
Regards,
Hans
drivers/power/supply/max17042_battery.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 8dffae76b6a3..5809ba997093 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -313,7 +313,10 @@ static int max17042_get_property(struct power_supply *psy, val->intval = data * 625 / 8; break; case POWER_SUPPLY_PROP_CAPACITY:
ret = regmap_read(map, MAX17042_RepSOC, &data);
if (chip->pdata->enable_current_sense)
ret = regmap_read(map, MAX17042_RepSOC, &data);
else
if (ret < 0) return ret;ret = regmap_read(map, MAX17042_VFSOC, &data);
base-commit: 5816b3e6577eaa676ceb00a848f0fd65fe2adc29
Hi,
On Wed, Sep 29, 2021 at 09:43:25PM +0200, Hans de Goede wrote:
On 9/29/21 8:14 PM, Henrik Grimler wrote:
On Galaxy S3 (i9300/i9305), which has the max17047 fuel gauge and no current sense resistor (rsns), the RepSOC register does not provide an accurate state of charge value. The reported value is wrong, and does not change over time. VFSOC however, which uses the voltage fuel gauge to determine the state of charge, always shows an accurate value.
For devices without current sense, VFSOC is already used for the soc-alert (0x0003 is written to MiscCFG register), so with this change the source of the alert and the PROP_CAPACITY value match.
Fixes: 359ab9f5b154 ("power_supply: Add MAX17042 Fuel Gauge Driver") Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Suggested-by: Wolfgang Wiedmeyer wolfgit@wiedmeyer.de Signed-off-by: Henrik Grimler henrik@grimler.se
Changes in v2: Re-write commit message to highlight that VFSOC is already used for alert, after Krzysztof's comments
Thanks, both patches looks good to me:
Reviewed-by: Hans de Goede hdegoede@redhat.com
for the series.
Thanks, both queued.
-- Sebastian
Regards,
Hans
drivers/power/supply/max17042_battery.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 8dffae76b6a3..5809ba997093 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -313,7 +313,10 @@ static int max17042_get_property(struct power_supply *psy, val->intval = data * 625 / 8; break; case POWER_SUPPLY_PROP_CAPACITY:
ret = regmap_read(map, MAX17042_RepSOC, &data);
if (chip->pdata->enable_current_sense)
ret = regmap_read(map, MAX17042_RepSOC, &data);
else
if (ret < 0) return ret;ret = regmap_read(map, MAX17042_VFSOC, &data);
base-commit: 5816b3e6577eaa676ceb00a848f0fd65fe2adc29
linux-stable-mirror@lists.linaro.org