The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c7c06a1532f3fe106687ac82a13492c6a619ff1c Mon Sep 17 00:00:00 2001

From: Andrew Cooks andrew.cooks@opengear.com Date: Fri, 2 Aug 2019 14:52:46 +0200 Subject: [PATCH] i2c: piix4: Fix port selection for AMD Family 16h Model 30h

Family 16h Model 30h SMBus controller needs the same port selection fix as described and fixed in commit 0fe16195f891 ("i2c: piix4: Fix SMBus port selection for AMD Family 17h chips")

commit 6befa3fde65f ("i2c: piix4: Support alternative port selection register") also fixed the port selection for Hudson2, but unfortunately this is not the exact same device and the AMD naming and PCI Device IDs aren't particularly helpful here.

The SMBus port selection register is common to the following Families and models, as documented in AMD's publicly available BIOS and Kernel Developer Guides:

50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) 52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS)

The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared between Bolton FCH and Family 16h Model 30h, but the location of the SmBus0Sel port selection bits are different:

51192 - Bolton Register Reference Guide

We distinguish between Bolton and Family 16h Model 30h using the PCI Revision ID:

Bolton is device 0x780b, revision 0x15 Family 16h Model 30h is device 0x780b, revision 0x1F Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A.

The following additional public AMD BKDG documents were checked and do not share the same port selection register:

42301 - Family 15h Model 00h-0Fh doesn't mention any 42300 - Family 15h Model 10h-1Fh doesn't mention any 49125 - Family 15h Model 30h-3Fh doesn't mention any

48751 - Family 16h Model 00h-0Fh uses the previously supported index register SB800_PIIX4_PORT_IDX_ALT at 0x2e

Signed-off-by: Andrew Cooks andrew.cooks@opengear.com Signed-off-by: Jean Delvare jdelvare@suse.de Cc: stable@vger.kernel.org [v4.6+] Signed-off-by: Wolfram Sang wsa@the-dreams.de

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c46c4bddc7ca..cba325eb852f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -91,7 +91,7 @@ #define SB800_PIIX4_PORT_IDX_MASK 0x06 #define SB800_PIIX4_PORT_IDX_SHIFT 1

-/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ +/* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ #define SB800_PIIX4_PORT_IDX_KERNCZ 0x02 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 @@ -358,18 +358,16 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, /* Find which register is used for port selection */ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD || PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON) { - switch (PIIX4_dev->device) { - case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS: + if (PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS || + (PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >= 0x1F)) { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ; - break; - case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS: - default: + } else { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; - break; } } else { if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2,