From: Lucy Yan lucyyan@google.com
[ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ]
Increase Rx ring size to address issue where hardware is reaching the receive work limit.
Before:
[ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached [ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached
Signed-off-by: Lucy Yan lucyyan@google.com Reviewed-by: Moritz Fischer mdf@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/dec/tulip/de2104x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c index cadcee645f74e..11ce50a057998 100644 --- a/drivers/net/ethernet/dec/tulip/de2104x.c +++ b/drivers/net/ethernet/dec/tulip/de2104x.c @@ -91,7 +91,7 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copi #define DSL CONFIG_DE2104X_DSL #endif
-#define DE_RX_RING_SIZE 64 +#define DE_RX_RING_SIZE 128 #define DE_TX_RING_SIZE 64 #define DE_RING_BYTES \ ((sizeof(struct de_desc) * DE_RX_RING_SIZE) + \
From: Olympia Giannou ogiannou@gmail.com
[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ]
Some WinCE devices face connectivity issues via the NDIS interface. They fail to register, resulting in -110 timeout errors and failures during the probe procedure.
In this kind of WinCE devices, the Windows-side ndis driver needs quite more time to be loaded and configured, so that the linux rndis host queries to them fail to be responded correctly on time.
More specifically, when INIT is called on the WinCE side - no other requests can be served by the Client and this results in a failed QUERY afterwards.
The increase of the waiting time on the side of the linux rndis host in the command-response loop leaves the INIT process to complete and respond to a QUERY, which comes afterwards. The WinCE devices with this special "feature" in their ndis driver are satisfied by this fix.
Signed-off-by: Olympia Giannou olympia.giannou@leica-geosystems.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/rndis_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 4f4f71b2966ba..9ccbdf1431063 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -213,7 +213,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen) dev_dbg(&info->control->dev, "rndis response error, code %d\n", retval); } - msleep(20); + msleep(40); } dev_dbg(&info->control->dev, "rndis response timeout\n"); return -ETIMEDOUT;
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 83f9a9c8c1edc222846dc1bde6e3479703e8e5a3 ]
This driver is a virtual driver stacked on top of Ethernet interfaces.
When this driver transmits data on the Ethernet device, the skb->protocol setting is inconsistent with the Ethernet header prepended to the skb.
This causes a user listening on the Ethernet interface with an AF_PACKET socket, to see different sll_protocol values for incoming and outgoing frames, because incoming frames would have this value set by parsing the Ethernet header.
This patch changes the skb->protocol value for outgoing Ethernet frames, making it consistent with the Ethernet header prepended. This makes a user listening on the Ethernet device with an AF_PACKET socket, to see the same sll_protocol value for incoming and outgoing frames.
Cc: Martin Schiller ms@dev.tdt.de Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/lapbether.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index c6db9a4e7c457..ef746ba74ab4c 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -201,8 +201,6 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb) struct net_device *dev; int size = skb->len;
- skb->protocol = htons(ETH_P_X25); - ptr = skb_push(skb, 2);
*ptr++ = size % 256; @@ -213,6 +211,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
skb->dev = dev = lapbeth->ethdev;
+ skb->protocol = htons(ETH_P_DEC); + skb_reset_network_header(skb);
dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ]
This patch sets skb->protocol before transmitting frames on the HDLC device, so that a user listening on the HDLC device with an AF_PACKET socket will see outgoing frames' sll_protocol field correctly set and consistent with that of incoming frames.
1. Control frames in hdlc_cisco and hdlc_ppp
When these drivers send control frames, skb->protocol is not set.
This value should be set to htons(ETH_P_HDLC), because when receiving control frames, their skb->protocol is set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, which then calls cisco_type_trans or ppp_type_trans. The skb->protocol of control frames is set to htons(ETH_P_HDLC) so that the control frames can be received by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the control frames.
2. hdlc_fr
When this driver sends control frames, skb->protocol is set to internal values used in this driver.
When this driver sends data frames (from upper stacked PVC devices), skb->protocol is the same as that of the user data packet being sent on the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3) (for Ethernet-emulating PVC devices).
However, skb->protocol for both control frames and data frames should be set to htons(ETH_P_HDLC), because when receiving, all frames received on the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, and because this driver doesn't provide a type_trans function in struct hdlc_proto, all frames will have their skb->protocol set to htons(ETH_P_HDLC). The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx to process the frames (control frames are consumed and data frames are re-received on upper PVC devices).
Cc: Krzysztof Halasa khc@pm.waw.pl Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/hdlc_cisco.c | 1 + drivers/net/wan/hdlc_fr.c | 3 +++ drivers/net/wan/hdlc_ppp.c | 1 + 3 files changed, 5 insertions(+)
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 7f99fb666f196..1587789ba9343 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -120,6 +120,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type, skb_put(skb, sizeof(struct cisco_packet)); skb->priority = TC_PRIO_CONTROL; skb->dev = dev; + skb->protocol = htons(ETH_P_HDLC); skb_reset_network_header(skb);
dev_queue_xmit(skb); diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index b6e0cfb095d35..bba19d068207a 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -435,6 +435,8 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) if (pvc->state.fecn) /* TX Congestion counter */ dev->stats.tx_compressed++; skb->dev = pvc->frad; + skb->protocol = htons(ETH_P_HDLC); + skb_reset_network_header(skb); dev_queue_xmit(skb); return NETDEV_TX_OK; } @@ -557,6 +559,7 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) skb_put(skb, i); skb->priority = TC_PRIO_CONTROL; skb->dev = dev; + skb->protocol = htons(ETH_P_HDLC); skb_reset_network_header(skb);
dev_queue_xmit(skb); diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index 8a9aced850be3..f4cb0ab25b983 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -254,6 +254,7 @@ static void ppp_tx_cp(struct net_device *dev, u16 pid, u8 code,
skb->priority = TC_PRIO_CONTROL; skb->dev = dev; + skb->protocol = htons(ETH_P_HDLC); skb_reset_network_header(skb); skb_queue_tail(&tx_queue, skb); }
From: Felix Fietkau nbd@nbd.name
[ Upstream commit 3bd5c7a28a7c3aba07a2d300d43f8e988809e147 ]
Limit maximum VHT MPDU size by local capability.
Signed-off-by: Felix Fietkau nbd@nbd.name Link: https://lore.kernel.org/r/20200917125031.45009-1-nbd@nbd.name Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/vht.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 43e45bb660bcd..b1d3fa708e16b 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -170,10 +170,7 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, /* take some capabilities as-is */ cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info); vht_cap->cap = cap_info; - vht_cap->cap &= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 | - IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 | - IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 | - IEEE80211_VHT_CAP_RXLDPC | + vht_cap->cap &= IEEE80211_VHT_CAP_RXLDPC | IEEE80211_VHT_CAP_VHT_TXOP_PS | IEEE80211_VHT_CAP_HTC_VHT | IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | @@ -182,6 +179,9 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
+ vht_cap->cap |= min_t(u32, cap_info & IEEE80211_VHT_CAP_MAX_MPDU_MASK, + own_cap.cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK); + /* and some based on our own capabilities */ switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
linux-stable-mirror@lists.linaro.org
-
Sasha Levin