For the INT_POLARITY register of Loongson-2K series IRQ controller, '0' indicates high level or rising edge triggered, '1' indicates low level or falling edge triggered, and we can find out the information from the Loongson 2K1000LA User Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description of the Interrupt Registers).

For Loongson-3 CPU series, setting INT_POLARITY register is not supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU series.

Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path") Cc: stable@vger.kernel.org Reviewed-by: Huacai Chen chenhuacai@kernel.org Co-developed-by: Chong Qiao qiaochong@loongson.cn Signed-off-by: Chong Qiao qiaochong@loongson.cn Signed-off-by: Jianmin Lv lvjianmin@loongson.cn --- drivers/irqchip/irq-loongson-liointc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c index 8d00a9ad5b00..5dd9db8f8fa8 100644 --- a/drivers/irqchip/irq-loongson-liointc.c +++ b/drivers/irqchip/irq-loongson-liointc.c @@ -32,6 +32,10 @@ #define LIOINTC_REG_INTC_EN_STATUS (LIOINTC_INTC_CHIP_START + 0x04) #define LIOINTC_REG_INTC_ENABLE (LIOINTC_INTC_CHIP_START + 0x08) #define LIOINTC_REG_INTC_DISABLE (LIOINTC_INTC_CHIP_START + 0x0c) +/* + * LIOINTC_REG_INTC_POL register is only valid for Loongson-2K series, and + * Loongson-3 series behave as noops. + */ #define LIOINTC_REG_INTC_POL (LIOINTC_INTC_CHIP_START + 0x10) #define LIOINTC_REG_INTC_EDGE (LIOINTC_INTC_CHIP_START + 0x14)

@@ -116,19 +120,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type) switch (type) { case IRQ_TYPE_LEVEL_HIGH: liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false); - liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true); + liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false); break; case IRQ_TYPE_LEVEL_LOW: liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false); - liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false); + liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true); break; case IRQ_TYPE_EDGE_RISING: liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true); - liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true); + liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false); break; case IRQ_TYPE_EDGE_FALLING: liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true); - liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false); + liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true); break; default: irq_gc_unlock_irqrestore(gc, flags);