- Linaro-acpi - lists.linaro.org

by Jon Masters

Hi Folks, A quick note that I'm poking at a test kernel with ACPI_INITRD_TABLE_OVERRIDE support. I don't condone this for production kernels, but for testing fixes to DSDT's and SSDT's it can be very useful to insert updated tables into the initrd (this is commonplace on x86 during development). If someone already poked at this, let me know if you plan to post something upstream, etc. Jon.

10 years, 10 months

4
3
0 0

[PATCH v5] acpi, apei, arm64: APEI initial support for aarch64.

by fu.wei＠linaro.org

From: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> This commit provides APEI arch-specific bits for aarch64 Meanwhile, add a new subfunction "hest_ia_init" for "acpi_disable_cmcff" which is used by IA-32 Architecture Corrected Machine Check (CMC), and add "HAVE_ACPI_APEI_HEST_IA32" to make sure only x86 use "hest_ia_init". Signed-off-by: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Tested-by: Jonathan (Zhixiong) Zhang <zjzhang(a)codeaurora.org> Signed-off-by: Fu Wei <fu.wei(a)linaro.org> Acked-by: Hanjun Guo <hanjun.guo(a)linaro.org> --- Changelog: v5: Add "HAVE_ACPI_APEI_HEST_IA32" instead of "#if defined(__i386__) || defined(__x86_64__)". v4: Rebase to latest kernel version(4.4-rc4). Move arch_apei_flush_tlb_one into header file as a inline function Add a new subfunction "hest_ia_init" for "acpi_disable_cmcff". v3: https://lkml.org/lkml/2015/12/3/521 Remove "acpi_disable_cmcff" from arm64 code, and wrap it in hest.c by "#if defined(__i386__) || defined(__x86_64__)" v2: https://lkml.org/lkml/2015/12/2/432 Rebase to latest kernel version(4.4-rc3). Move arch_apei_flush_tlb_one() to arch/arm64/kernel/acpi.c v1: https://lkml.org/lkml/2015/8/14/199 Move arch_apei_flush_tlb_one() to arch/arm64/include/asm/apci.h. Delete arch/arm64/kernel/apei.c. Add "#ifdef CONFIG_ACPI_APEI" for "acpi_disable_cmcff". arch/arm64/Kconfig | 1 + arch/arm64/include/asm/acpi.h | 7 ++++++- arch/x86/Kconfig | 1 + drivers/acpi/apei/Kconfig | 3 +++ drivers/acpi/apei/hest.c | 19 ++++++++++++++++--- 5 files changed, 27 insertions(+), 4 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 871f217..58c8992 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select HAVE_ACPI_APEI if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_GCOV_PROFILE_ALL diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index caafd63..da657a9 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -17,6 +17,7 @@ #include <asm/cputype.h> #include <asm/smp_plat.h> +#include <asm/tlbflush.h> /* Macros for consistency checks of the GICC subtable of MADT */ #define ACPI_MADT_GICC_LENGTH \ @@ -94,6 +95,10 @@ static inline const char *acpi_get_enable_method(int cpu) #ifdef CONFIG_ACPI_APEI pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); -#endif +static inline void arch_apei_flush_tlb_one(unsigned long addr) +{ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE); +} +#endif /* CONFIG_ACPI_APEI */ #endif /*_ASM_ACPI_H*/ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index db3622f..1f9107b 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -74,6 +74,7 @@ config X86 select GENERIC_TIME_VSYSCALL select HAVE_ACPI_APEI if ACPI select HAVE_ACPI_APEI_NMI if ACPI + select HAVE_ACPI_APEI_HEST_IA32 if ACPI select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_AOUT if X86_32 select HAVE_ARCH_AUDITSYSCALL diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig index b0140c8..a60bb00 100644 --- a/drivers/acpi/apei/Kconfig +++ b/drivers/acpi/apei/Kconfig @@ -4,6 +4,9 @@ config HAVE_ACPI_APEI config HAVE_ACPI_APEI_NMI bool +config HAVE_ACPI_APEI_HEST_IA32 + bool + config ACPI_APEI bool "ACPI Platform Error Interface (APEI)" select MISC_FILESYSTEMS diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 20b3fcf..c708c95 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -117,15 +117,27 @@ int apei_hest_parse(apei_hest_func_t func, void *data) } EXPORT_SYMBOL_GPL(apei_hest_parse); +#ifdef CONFIG_HAVE_ACPI_APEI_HEST_IA32 /* * Check if firmware advertises firmware first mode. We need FF bit to be set * along with a set of MC banks which work in FF mode. */ static int __init hest_parse_cmc(struct acpi_hest_header *hest_hdr, void *data) { - return arch_apei_enable_cmcff(hest_hdr, data); + if (!acpi_disable_cmcff) + return !arch_apei_enable_cmcff(hest_hdr, data); + + return 0; } +static inline int __init hest_ia_init(void) +{ + return apei_hest_parse(hest_parse_cmc, NULL); +} +#else +static inline int __init hest_ia_init(void) { return 0; } +#endif + struct ghes_arr { struct platform_device **ghes_devs; unsigned int count; @@ -232,8 +244,9 @@ void __init acpi_hest_init(void) goto err; } - if (!acpi_disable_cmcff) - apei_hest_parse(hest_parse_cmc, NULL); + rc = hest_ia_init(); + if (rc) + goto err; if (!ghes_disable) { rc = apei_hest_parse(hest_parse_ghes_count, &ghes_count); -- 2.5.0

10 years, 10 months

1
0
0 0

[PATCH 00/11] ARM64 PCI hostbridge init based on ACPI

by Hanjun Guo

This patch set is introducing ARM64 PCI hostbridge init based on ACPI, which based on Jiang Liu's patch set "Consolidate ACPI PCI root common code into ACPI core": https://lkml.org/lkml/2015/5/14/98 This patch set including three parts: - the first part is PATCH 1, which should be merged into Jiang Liu's patch set to fix the compile error on ARM64 when ACPI enabled. - the senconed part is the refactoring of mmconfig to let that mechanism can be used for ARM64 too, it's Tomasz's work but he is moving to other work and pretty busy for now, so I will take care of those patches, Tomasz will show up when some comments need to be addressed :) In this version of mmconfig refactor patches, I removed the rename of mmconfig -> ecam patch, because mmconfig is in multi places, and need much more effort to convert them all to ecam, Bjorn, if you don't like it, I can add them back. - The third part is about the ARM64 PCI hostbridge init based on ACPI, first I fixed a compile error for XEN PCI on ARM64 when PCI_MMCONFIG=y, and then introduce PCI init based on Jiang Liu and Tomasz's patch set. patch for ARM64 ACPI PCI still reserve the bus sysdata to get the domain number, because Yijing's patch set is still under review, will be removed when Yijing's patch set hits upstream. This patch set was tested by Suravee on Seattle board with legacy interrupt (not MSI), and it works, also tested on qemu by Graeme. You can get the code from: git://git.linaro.org/leg/acpi/acpi.git, devel branch Comments are welcomed. Thanks Hanjun Hanjun Guo (3): ARM64 / PCI: introduce struct pci_controller for ACPI XEN / PCI: Remove the dependence on arch x86 when PCI_MMCONFIG=y ARM64 / PCI / ACPI: support for ACPI based PCI hostbridge init Tomasz Nowicki (8): x86, pci: Clean up comment about buggy MMIO config space access for AMD Fam10h CPUs. x86, pci: Abstract PCI config accessors and use AMD Fam10h workaround exclusively. x86, pci: Reorder logic of pci_mmconfig_insert() function x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory pci, acpi, mcfg: Provide generic implementation of MCFG code initialization. x86, pci: mmconfig_{32,64}.c code refactoring - remove code duplication. x86, pci, ecam: mmconfig_64.c becomes default implementation for ECAM driver. pci, acpi, mcfg: Share ACPI PCI config space accessors. arch/arm64/Kconfig | 7 + arch/arm64/include/asm/pci.h | 10 ++ arch/arm64/kernel/pci.c | 245 ++++++++++++++++++++++++++-- arch/x86/Kconfig | 4 + arch/x86/include/asm/pci_x86.h | 34 +--- arch/x86/pci/Makefile | 4 +- arch/x86/pci/acpi.c | 1 + arch/x86/pci/mmconfig-shared.c | 301 +++++++++++----------------------- arch/x86/pci/mmconfig_32.c | 35 +--- arch/x86/pci/mmconfig_64.c | 153 ------------------ arch/x86/pci/numachip.c | 25 +-- drivers/acpi/Makefile | 1 + drivers/acpi/mcfg.c | 103 ++++++++++++ drivers/pci/Kconfig | 10 ++ drivers/pci/Makefile | 5 + drivers/pci/ecam.c | 358 +++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci.c | 26 +-- drivers/xen/pci.c | 7 +- include/linux/acpi.h | 2 + include/linux/ecam.h | 56 +++++++ 20 files changed, 923 insertions(+), 464 deletions(-) delete mode 100644 arch/x86/pci/mmconfig_64.c create mode 100644 drivers/acpi/mcfg.c create mode 100644 drivers/pci/ecam.c create mode 100644 include/linux/ecam.h -- 1.9.1

10 years, 10 months

14
60
0 0

[PATCH v3] acpi, apei, arm64: APEI initial support for aarch64.

by fu.wei＠linaro.org

From: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> This commit provides APEI arch-specific bits for aarch64 The reason for wrapping "acpi_disable_cmcff" by "#if defined(__i386__) || defined(__x86_64__)" in hest.c is: according to ACPI spec CMC(Corrected Machine Check) is only for IA-32 Architecture. Changelog: v3: Remove "acpi_disable_cmcff" from arm64 code, and wrap it in hest.c by "#if defined(__i386__) || defined(__x86_64__)" v2: https://lkml.org/lkml/2015/12/2/432 Rebase to latest kernel version(4.4-rc3). Move arch_apei_flush_tlb_one() to arch/arm64/kernel/acpi.c v1: https://lkml.org/lkml/2015/8/14/199 Move arch_apei_flush_tlb_one() to arch/arm64/include/asm/apci.h. Delete arch/arm64/kernel/apei.c. Add "#ifdef CONFIG_ACPI_APEI" for "acpi_disable_cmcff". Signed-off-by: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Tested-by: Jonathan (Zhixiong) Zhang <zjzhang(a)codeaurora.org> Signed-off-by: Fu Wei <fu.wei(a)linaro.org> --- arch/arm64/Kconfig | 1 + arch/arm64/include/asm/acpi.h | 1 + arch/arm64/kernel/acpi.c | 6 ++++++ drivers/acpi/apei/hest.c | 2 ++ 4 files changed, 10 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 871f217..58c8992 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select HAVE_ACPI_APEI if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_GCOV_PROFILE_ALL diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index caafd63..7207f8e 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -94,6 +94,7 @@ static inline const char *acpi_get_enable_method(int cpu) #ifdef CONFIG_ACPI_APEI pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); +void arch_apei_flush_tlb_one(unsigned long addr); #endif #endif /*_ASM_ACPI_H*/ diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index d1ce8e2..7a742e7 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -32,6 +32,7 @@ #ifdef CONFIG_ACPI_APEI # include <linux/efi.h> # include <asm/pgtable.h> +# include <asm/tlbflush.h> #endif int acpi_noirq = 1; /* skip ACPI IRQ initialization */ @@ -233,4 +234,9 @@ pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) return __pgprot(PROT_NORMAL_NC); return __pgprot(PROT_DEVICE_nGnRnE); } + +void arch_apei_flush_tlb_one(unsigned long addr) +{ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE); +} #endif diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 20b3fcf..4ead747 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -232,8 +232,10 @@ void __init acpi_hest_init(void) goto err; } +#if defined(__i386__) || defined(__x86_64__) if (!acpi_disable_cmcff) apei_hest_parse(hest_parse_cmc, NULL); +#endif if (!ghes_disable) { rc = apei_hest_parse(hest_parse_ghes_count, &ghes_count); -- 2.5.0

10 years, 10 months

3
3
0 0

[PATCH] acpi, apei, hest: Move HEST table initialization where it belongs.

by fu.wei＠linaro.org

From: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Since HEST (hardware error sources table) can describe more than PCI specific errors, it needs to be moved out of acpi_pci_root_init. Changelog: v1: This patch - the first upstream patch to linux mailing lists. Fu Wei: (1)Rebase to v4.4-rc4; (2)Remove "#include <acpi/apei.h>" from drivers/acpi/pci_root.c] Signed-off-by: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Signed-off-by: Fu Wei <fu.wei(a)linaro.org> --- drivers/acpi/pci_root.c | 2 -- drivers/acpi/scan.c | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index ae3fe4e..a35dd23 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -33,7 +33,6 @@ #include <linux/acpi.h> #include <linux/slab.h> #include <linux/dmi.h> -#include <acpi/apei.h> /* for acpi_hest_init() */ #include "internal.h" @@ -865,7 +864,6 @@ out_release_info: void __init acpi_pci_root_init(void) { - acpi_hest_init(); if (acpi_pci_disabled) return; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 78d5f02..a52e776 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -13,6 +13,8 @@ #include <linux/nls.h> #include <linux/dma-mapping.h> +#include <acpi/apei.h> /* for acpi_hest_init() */ + #include <asm/pgtable.h> #include "internal.h" @@ -1912,6 +1914,7 @@ int __init acpi_scan_init(void) { int result; + acpi_hest_init(); acpi_pci_root_init(); acpi_pci_link_init(); acpi_processor_init(); -- 2.5.0

10 years, 10 months

1
0
0 0

[PATCH v2] acpi, apei, arm64: APEI initial support for aarch64.

by fu.wei＠linaro.org

From: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> This commit provides APEI arch-specific bits for aarch64 Changelog: v2: Rebase to latest kernel version(4.4-rc3). Move arch_apei_flush_tlb_one() to arch/arm64/kernel/acpi.c v1: https://lkml.org/lkml/2015/8/14/199 Move arch_apei_flush_tlb_one() to arch/arm64/include/asm/apci.h. Delete arch/arm64/kernel/apei.c. Add "#ifdef CONFIG_ACPI_APEI" for "acpi_disable_cmcff". Signed-off-by: Tomasz Nowicki <tomasz.nowicki(a)linaro.org> Tested-by: Jonathan (Zhixiong) Zhang <zjzhang(a)codeaurora.org> Signed-off-by: Fu Wei <fu.wei(a)linaro.org> --- arch/arm64/Kconfig | 1 + arch/arm64/include/asm/acpi.h | 4 ++++ arch/arm64/kernel/acpi.c | 10 ++++++++++ 3 files changed, 15 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 871f217..58c8992 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI + select HAVE_ACPI_APEI if ACPI select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_GCOV_PROFILE_ALL diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index caafd63..0d70c74 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -46,6 +46,9 @@ typedef u64 phys_cpuid_t; extern int acpi_disabled; extern int acpi_noirq; extern int acpi_pci_disabled; +#ifdef CONFIG_ACPI_APEI +extern int acpi_disable_cmcff; +#endif static inline void disable_acpi(void) { @@ -94,6 +97,7 @@ static inline const char *acpi_get_enable_method(int cpu) #ifdef CONFIG_ACPI_APEI pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr); +void arch_apei_flush_tlb_one(unsigned long addr); #endif #endif /*_ASM_ACPI_H*/ diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index d1ce8e2..811fea2 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -32,6 +32,7 @@ #ifdef CONFIG_ACPI_APEI # include <linux/efi.h> # include <asm/pgtable.h> +# include <asm/tlbflush.h> #endif int acpi_noirq = 1; /* skip ACPI IRQ initialization */ @@ -41,6 +42,10 @@ EXPORT_SYMBOL(acpi_disabled); int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */ EXPORT_SYMBOL(acpi_pci_disabled); +#ifdef CONFIG_ACPI_APEI +int acpi_disable_cmcff; +#endif + static bool param_acpi_off __initdata; static bool param_acpi_force __initdata; @@ -233,4 +238,9 @@ pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) return __pgprot(PROT_NORMAL_NC); return __pgprot(PROT_DEVICE_nGnRnE); } + +void arch_apei_flush_tlb_one(unsigned long addr) +{ + flush_tlb_kernel_range(addr, addr + PAGE_SIZE); +} #endif -- 2.5.0

10 years, 10 months

3
2
0 0

[PATCH v8 0/5] Watchdog: introduce ARM SBSA watchdog driver

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Introduce Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt for FDT info of SBSA Generic Watchdog, and give two examples of adding SBSA Generic Watchdog device node into the dts files: foundation-v8.dts and amd-seattle-soc.dtsi. (2)Introduce "pretimeout" into the watchdog framework, and update Documentation/watchdog/watchdog-kernel-api.txt to introduce: (1)the new elements in the watchdog_device and watchdog_ops struct; (2)the new API "watchdog_init_timeouts". (3)Introduce ARM SBSA watchdog driver: a.Use linux kernel watchdog framework; b.Work with FDT on ARM64; c.Use "pretimeout" in watchdog framework; d.Support getting timeout and pretimeout from parameter and FDT at the driver init stage. e.In the first timeout, do panic to save system context; f.In the second stage, user can still feed the dog without cleaning WS0. By this feature, we can avoid the panic infinite loops, while backing up a large system context in a server. g.In the second stage, can trigger WS1 by setting pretimeout = 0 if necessary. This patchset has been tested with watchdog daemon (ACPI/FDT, module/build-in) on the following platforms: (1)ARM Foundation v8 model (2)AMD Seattle platform This patchset has been tested with kdump successfully. Changelog: v8: Rebase to latest kernel version(4.3-rc7). Separate the patches of GTDT support and arm_arch_timer. This clocksource relevant patch will upstreamed in a individual patchset. Update all the default timeout and pretimeout to 30s and 60s. Improve documentation and inline comments. Fix a bug in pretimeout support which makes timeout and pretimeout parameters initialization fail. v7: Rebase to latest kernel version(4.2-rc7). Improve FDT support: geting resource by order, instead of name. According to the FDT support, Update the example dts file, gtdt.c and sbsa_gwdt.c. Pass the sparse test, and fix the warning. Fix the max_pretimeout and max_timeout value overflow bug. Delete the WCV output value. v6: Improve the dtb example files: reduce the register frame size to 4K. Improve pretimeout support: (1) improve watchdog_init_timeouts function (2) rename watchdog_check_min_max_timeouts back to the original name (1) improve watchdog_timeout_invalid/watchdog_pretimeout_invalid Add the new features in the sbsa_gwdt driver: (1) In the second stage, user can feed the dog without cleaning WS0. (2) In the second stage, user can trigger WS1 by setting pretimeout = 0. (3) expand the max value of pretimeout, in case 10 second is not enough for a kdump kernel reboot in panic. v5: Improve pretimeout support: (1)fix typo in documentation and comments. (2)fix the timeout limits validation bug. Simplify sbsa_gwdt driver: (1)integrate all the registers access functions into caller. v4: Refactor GTDT support code: remove it from arch/arm64/kernel/acpi.c, put it into drivers/acpi/gtdt.c file. Integrate the GTDT code of drivers/clocksource/arm_arch_timer.c into drivers/acpi/gtdt.c. Improve pretimeout support, fix "pretimeout == 0" problem. Simplify sbsa_gwdt driver: (1)timeout/pretimeout limits setup; (2)keepalive function; (3)delete "clk == 0" check; (4)delete WS0 status bit check in interrupt routine; (5)sbsa_gwdt_set_wcv function. v3: Delete "export arch_timer_get_rate" patch. Driver back to use arch_timer_get_cntfrq. Improve watchdog_init_timeouts function and update relevant documentation. Improve watchdog_timeout_invalid and watchdog_pretimeout_invalid. Improve foundation-v8.dts: delete the unnecessary tag of device node. Remove "ARM64 || COMPILE_TEST" from Kconfig. Add comments in arch/arm64/kernel/acpi.c Fix typoes and incorrect comments. v2: Improve watchdog-kernel-api.txt documentation for pretimeout support. Export "arch_timer_get_rate" in arm_arch_timer.c. Add watchdog_init_timeouts API for pretimeout support in framework. Improve suspend and resume foundation in driver Improve timeout/pretimeout values init code in driver. Delete unnecessary items of the sbsa_gwdt struct and #define. Delete all unnecessary debug info in driver. Fix 64bit division bug. Use the arch_timer interface to get watchdog clock rate. Add MODULE_DEVICE_TABLE for platform device id. Fix typoes. v1: The first version upstream patchset to linux mailing list. Fu Wei (7): Documentation: add sbsa-gwdt.txt documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introdouce "pretimeout" into framework Watchdog: introduce ARM SBSA watchdog driver ACPI: add GTDT table parse driver into ACPI driver Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver Fu Wei (5): Documentation: add sbsa-gwdt driver documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introdouce "pretimeout" into framework Watchdog: introduce ARM SBSA watchdog driver .../devicetree/bindings/watchdog/sbsa-gwdt.txt | 46 +++ Documentation/watchdog/watchdog-kernel-api.txt | 55 ++- Documentation/watchdog/watchdog-parameters.txt | 6 + arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 8 + arch/arm64/boot/dts/arm/foundation-v8.dts | 7 + drivers/watchdog/Kconfig | 14 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 459 +++++++++++++++++++++ drivers/watchdog/watchdog_core.c | 127 ++++-- drivers/watchdog/watchdog_dev.c | 53 +++ include/linux/watchdog.h | 39 +- 11 files changed, 773 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt create mode 100644 drivers/watchdog/sbsa_gwdt.c -- 2.4.3

10 years, 11 months

7
36
0 0

[PATCH] CPPC: Initialize CPUFreq CPU co-ord type correctly

by Ashwin Chaugule

The CPU policy struct indicates the co-ordination type for all CPUs of a common freq domain. Initialize it correctly using the CPU specific data gathered from CPPC ACPI lib via acpi_get_psd_map(). Signed-off-by: Ashwin Chaugule <ashwin.chaugule(a)linaro.org> --- drivers/cpufreq/cppc_cpufreq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c index 93c219f..508809b 100644 --- a/drivers/cpufreq/cppc_cpufreq.c +++ b/drivers/cpufreq/cppc_cpufreq.c @@ -98,6 +98,7 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->max = cpu->perf_caps.highest_perf; policy->cpuinfo.min_freq = policy->min; policy->cpuinfo.max_freq = policy->max; + policy->shared_type = cpu->shared_type; if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) cpumask_copy(policy->cpus, cpu->shared_cpu_map); -- 1.9.1

10 years, 11 months

2
6
0 0

You recieved tax refund payment (case #0000438914)

by Internal Revenue Service

You are receiving this notification because your tax refund request has been processed. Please download attached document with approved 79082Z form. Transaction type - Tax Refund Payment method - Wire transfer Amount - $ 3894.00 Status - Processed Form - 79082Z Additional information regarding tax refunds can be found on our website: http://www.irs.gov/Refunds. Regards, Internal Revenue Service Address: 1111 Constitution Avenue, NW Washington, DC 20224 Website: http://www.irs.gov Phone: 1-800-829-1040

10 years, 11 months

1
0
0 0

leg-kernel tag leg-20151118.0 released

by Graeme Gregory

The leg-kernel release has been made and tagged as leg-20151118.0 This is based on mainline kernel v4.4-rc1 Repository : http://git.linaro.org/leg/acpi/leg-kernel.git Direct Link: https://git.linaro.org/leg/acpi/leg-kernel.git/commit/689c7e5a920fac905a584… Topic Branches :- http://git.linaro.org/leg/acpi/acpi.git - topic-acpi-console - topic-amba-probing - topic-capsule - topic-gtdt-wakeup-timer - topic-juno-fvp-qemu - topic-pci - topic-sbsa-watchdog - topic-seattle NOTES:- This is now a mainline based release without Android components from LLCT kernel.

10 years, 11 months

1
0
0 0

You have received fax, document 00000964357

by Interfax Online

You have a new fax! Scanned fax document is attached to this email. Resolution: 400 DPI Scanned by: Harold Kaiser Scan time: 21 seconds File size: 112 Kb Fax name: fax_00000964357.doc Number of pages: 12 Scanned: Tue, 17 Nov 2015 01:06:16 +0300 Thanks for choosing Interfax!

10 years, 11 months

1
0
0 0

You have received fax, document 00000449466

by Interfax Service

A new fax document for you. Please, download fax document attached to this email. Date: Fri, 13 Nov 2015 00:01:28 +0300 Fax name: task00000449466.doc Scan duration: 13 seconds From: Rafael Lee Pages: 3 Filesize: 287 Kb Scan quality: 600 DPI Thanks for choosing Interfax!

10 years, 11 months

1
0
0 0

[PATCH] CPPC: Use h/w reduced version of the PCCT structure

by Ashwin Chaugule

CPPC is enabled only on platforms which support the h/w reduced ACPI specification. So use the h/w reduced version of the PCCT consistently while deferencing PCCT contents. Signed-off-by: Ashwin Chaugule <ashwin.chaugule(a)linaro.org> --- drivers/acpi/cppc_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index 3c083d2..6730f96 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -304,7 +304,7 @@ EXPORT_SYMBOL_GPL(acpi_get_psd_map); static int register_pcc_channel(int pcc_subspace_idx) { - struct acpi_pcct_subspace *cppc_ss; + struct acpi_pcct_hw_reduced *cppc_ss; unsigned int len; if (pcc_subspace_idx >= 0) { -- 1.9.1

10 years, 11 months

1
0
0 0

You have received fax, document 000364665

by Interfax

A new fax document for you. Scanned fax document is attached to this email. File name: task_000364665.doc Filesize: 267 Kb Scan time: 17 seconds Pages scanned: 10 Scanned: Wed, 11 Nov 2015 09:41:45 +0300 Scan quality: 100 DPI Author: Lee Walls Thank you for using Interfax!

10 years, 11 months

1
0
0 0

You have received a new fax, document 00000983011

by Interfax Service

A new fax document for you. To view it please open the attachment. Scanned: Wed, 11 Nov 2015 01:34:18 +0300 Scan duration: 10 seconds Filename: document00000983011.doc Quality: 500 DPI From: Daryl Sears Filesize: 299 Kb Pages sent: 6 Thank you for using Interfax!

10 years, 11 months

1
0
0 0

[RESEND PATCH 0/3] ACPI compliance testing for MADT and its subtables

by Al Stone

This patch series adds in specific ACPI compliance testing for the MADT and all of its various subtables (16, currently). The first patch adds tests for the MADT and all subtables currently defined in FWTS. The last two patches add in the relatively new GIC ITS subtable and compliance tests for it. There are still multiple TODOs in the compliance checks; these will be added as clarification of the spec becomes available. Al Stone (3): ACPI: MADT: add in compliance tests for the MADT and subtables ACPI: Add in MADT subtable description for GIC ITS subtable ACPI: MADT: add in compliance checks for the GIC ITS subtable src/Makefile.am | 2 + src/acpi/compliance/madt.c | 1377 +++++++++++++++++++++++++++++++++++++++++++ src/lib/include/fwts_acpi.h | 10 + 3 files changed, 1389 insertions(+) create mode 100644 src/acpi/compliance/madt.c -- 2.5.0

10 years, 11 months

1
4
0 0

[PATCH 0/3] ACPI compliance testing for MADT and its subtables

by Al Stone

This patch series adds in specific ACPI compliance testing for the MADT and all of its various subtables (16, currently). The first patch adds tests for the MADT and all subtables currently defined in FWTS. The last two patches add in the relatively new GIC ITS subtable and compliance tests for it. There are still multiple TODOs in the compliance checks; these will be added as clarification of the spec becomes available. Al Stone (3): ACPI: MADT: add in compliance tests for the MADT and subtables ACPI: Add in MADT subtable description for GIC ITS subtable ACPI: MADT: add in compliance checks for the GIC ITS subtable src/Makefile.am | 2 + src/acpi/compliance/madt.c | 1377 +++++++++++++++++++++++++++++++++++++++++++ src/lib/include/fwts_acpi.h | 10 + 3 files changed, 1389 insertions(+) create mode 100644 src/acpi/compliance/madt.c -- 2.5.0

10 years, 11 months

1
0
0 0

[PATCH] ACPI: MADT: further update to GICC flag checks for 6.0

by Al Stone

In a previous patch ("ACPI: MADT: update GICC flag checks for ACPI 6.0"), I corrected the flag mask used in the if test, but failed to correct the flag used in the fwts_failed() call that was part of the logic block. This patch fixes the mask for fwts_failed() so the test and failure message are consistent again. Signed-off-by: Al Stone <al.stone(a)linaro.org> --- src/acpi/madt/madt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/acpi/madt/madt.c b/src/acpi/madt/madt.c index 1f19848..31c6650 100644 --- a/src/acpi/madt/madt.c +++ b/src/acpi/madt/madt.c @@ -232,7 +232,7 @@ static int madt_test1(fwts_framework *fw) "MADTGICFLags", "MADT GIC, flags, bits 2..31 are reserved " "and should be zero, but are set as: %" PRIx32 ".", - gic->flags & 0xfffffffc); + gic->flags & 0xfffffff8); } skip = sizeof(fwts_acpi_madt_gic); -- 2.5.0

10 years, 11 months

2
1
0 0

[PATCH v9 0/5] Watchdog: introduce ARM SBSA watchdog driver

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Introduce Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt for FDT info of SBSA Generic Watchdog, and give two examples of adding SBSA Generic Watchdog device node into the dts files: foundation-v8.dts and amd-seattle-soc.dtsi. (2)Introduce "pretimeout" into the watchdog framework, and update Documentation/watchdog/watchdog-kernel-api.txt to introduce: (1)the new elements in the watchdog_device and watchdog_ops struct; (2)the new API "watchdog_init_timeouts". (3)Introduce ARM SBSA watchdog driver: a.Use linux kernel watchdog framework; b.Work with FDT on ARM64; c.Use "pretimeout" in watchdog framework; d.Support getting timeout and pretimeout from parameter and FDT at the driver init stage. e.In the first timeout, do panic to save system context; f.In the second stage, user can still feed the dog without cleaning WS0. By this feature, we can avoid the panic infinite loops, while backing up a large system context in a server. g.In the second stage, can trigger WS1 by setting pretimeout = 0 if necessary. This patchset has been tested with watchdog daemon (ACPI/FDT, module/build-in) on the following platforms: (1)ARM Foundation v8 model (2)AMD Seattle platform This patchset has been tested with kdump successfully. Changelog: v9: Rebase to latest kernel version(4.3). Update the Documentation of sbsa-gwdt device node info of FDT: (1) move some introduction to pretimeout patch (2) delete WS1 value from "interrupts" of binding documentation, since WS1 won't be handled by Linux. v8: Rebase to latest kernel version(4.3-rc7). Separate the patches of GTDT support and arm_arch_timer. This clocksource relevant patch will upstreamed in a individual patchset. Update all the default timeout and pretimeout to 30s and 60s. Improve documentation and inline comments. Fix a bug in pretimeout support which makes timeout and pretimeout parameters initialization fail. v7: Rebase to latest kernel version(4.2-rc7). Improve FDT support: geting resource by order, instead of name. According to the FDT support, Update the example dts file, gtdt.c and sbsa_gwdt.c. Pass the sparse test, and fix the warning. Fix the max_pretimeout and max_timeout value overflow bug. Delete the WCV output value. v6: Improve the dtb example files: reduce the register frame size to 4K. Improve pretimeout support: (1) improve watchdog_init_timeouts function (2) rename watchdog_check_min_max_timeouts back to the original name (1) improve watchdog_timeout_invalid/watchdog_pretimeout_invalid Add the new features in the sbsa_gwdt driver: (1) In the second stage, user can feed the dog without cleaning WS0. (2) In the second stage, user can trigger WS1 by setting pretimeout = 0. (3) expand the max value of pretimeout, in case 10 second is not enough for a kdump kernel reboot in panic. v5: Improve pretimeout support: (1)fix typo in documentation and comments. (2)fix the timeout limits validation bug. Simplify sbsa_gwdt driver: (1)integrate all the registers access functions into caller. v4: Refactor GTDT support code: remove it from arch/arm64/kernel/acpi.c, put it into drivers/acpi/gtdt.c file. Integrate the GTDT code of drivers/clocksource/arm_arch_timer.c into drivers/acpi/gtdt.c. Improve pretimeout support, fix "pretimeout == 0" problem. Simplify sbsa_gwdt driver: (1)timeout/pretimeout limits setup; (2)keepalive function; (3)delete "clk == 0" check; (4)delete WS0 status bit check in interrupt routine; (5)sbsa_gwdt_set_wcv function. v3: Delete "export arch_timer_get_rate" patch. Driver back to use arch_timer_get_cntfrq. Improve watchdog_init_timeouts function and update relevant documentation. Improve watchdog_timeout_invalid and watchdog_pretimeout_invalid. Improve foundation-v8.dts: delete the unnecessary tag of device node. Remove "ARM64 || COMPILE_TEST" from Kconfig. Add comments in arch/arm64/kernel/acpi.c Fix typoes and incorrect comments. v2: Improve watchdog-kernel-api.txt documentation for pretimeout support. Export "arch_timer_get_rate" in arm_arch_timer.c. Add watchdog_init_timeouts API for pretimeout support in framework. Improve suspend and resume foundation in driver Improve timeout/pretimeout values init code in driver. Delete unnecessary items of the sbsa_gwdt struct and #define. Delete all unnecessary debug info in driver. Fix 64bit division bug. Use the arch_timer interface to get watchdog clock rate. Add MODULE_DEVICE_TABLE for platform device id. Fix typoes. v1: The first version upstream patchset to linux mailing list. Fu Wei (5): Documentation: add sbsa-gwdt driver documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introdouce "pretimeout" into framework Watchdog: introduce ARM SBSA watchdog driver .../devicetree/bindings/watchdog/sbsa-gwdt.txt | 34 ++ Documentation/watchdog/watchdog-kernel-api.txt | 61 ++- Documentation/watchdog/watchdog-parameters.txt | 6 + arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 8 + arch/arm64/boot/dts/arm/foundation-v8.dts | 7 + drivers/watchdog/Kconfig | 14 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 459 +++++++++++++++++++++ drivers/watchdog/watchdog_core.c | 127 ++++-- drivers/watchdog/watchdog_dev.c | 53 +++ include/linux/watchdog.h | 39 +- 11 files changed, 767 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt create mode 100644 drivers/watchdog/sbsa_gwdt.c -- 2.5.0

10 years, 11 months

3
7
0 0

[PATCH RFC 0/3] ACPI, clocksource: add GTDT and ARM memory-mapped timer support

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Introduce ACPI GTDT parser: drivers/acpi/gtdt.c Parse all kinds of timer in GTDT table of ACPI:arch timer, memory-mapped timer and SBSA Generic Watchdog timer. This driver can help to simplify all the relevant timer drivers, and separate all the ACPI GTDT knowledge from them. (2)Simplify ACPI code for arch timer in arm_arch_timer.c (3)Add memory-mapped timer support in arm_arch_timer.c [PATCH 2/3] and [PATCH 3/3] depend on a patchset [PATCH v2 0/5] ACPI probing infrastructure, https://lkml.org/lkml/2015/9/13/126, which has been accepted by upstream maintainer, and has been merged in linux-next.git, tag: next-20151013. The SBSA Generic Watchdog info parsing support have been tested with a upstreaming SBSA Generic Watchdog driver: https://lkml.org/lkml/2015/10/27/466 on the following platforms: (1)ARM Foundation v8 model (2)AMD Seattle platform ARM memory-mapped timer support of this patchset has been tested on the following platforms: (1)ARM Foundation v8 model Changelog: v1: The first upstreaming version. Fu Wei (3): ACPI: add GTDT table parse driver into ACPI driver clocksource: simplify ACPI code in arm_arch_timer.c clocksource: add memory-mapped timer support in arm_arch_timer.c drivers/acpi/Kconfig | 9 + drivers/acpi/Makefile | 1 + drivers/acpi/gtdt.c | 367 +++++++++++++++++++++++++++++++++++ drivers/clocksource/arm_arch_timer.c | 176 +++++++++++++---- include/clocksource/arm_arch_timer.h | 19 ++ include/linux/acpi.h | 17 ++ 6 files changed, 554 insertions(+), 35 deletions(-) create mode 100644 drivers/acpi/gtdt.c -- 2.4.3

10 years, 11 months

2
4
0 0

(no subject)

by Xkoy Yy

Ygghh JJ

10 years, 11 months

1
0
0 0

You have new fax, document 000704674

by Interfax Online

You have received a new fax. You can find your fax document in the attachment. Scan quality: 100 DPI File size: 150 Kb Date of scan: Fri, 6 Nov 2015 03:19:54 +0300 Processed in: 57 seconds File name: document-000704674.doc Pages: 10 Sender: Karl Coleman Thanks for using Interfax service!

10 years, 11 months

1
0
0 0

You have received a new fax, document 0000460447

by Interfax Online

You have a new fax! Scanned fax document is attached to this email. Scan quality: 500 DPI Pages scanned: 3 File name: task-0000460447.doc Processed in: 53 seconds Date: Wed, 4 Nov 2015 21:22:33 +0300 Filesize: 161 Kb Sender: Dan Ryan Thank you for using Interfax!

10 years, 11 months

1
0
0 0

You have 1 new fax, document 000222326

by Interfax

New incoming fax document. Please, download fax document attached to this email. Scan date: Sat, 31 Oct 2015 10:30:51 +0300 Filesize: 178 Kb Resolution: 400 DPI Author: Clayton Hines Scanned in: 7 seconds Document name: scanned-000222326.doc Pages sent: 12 Thanks for choosing Interfax!

10 years, 12 months

1
0
0 0

[PATCH] ACPI: MADT: update GICC flag checks for ACPI 6.0

by Al Stone

In the ACPI 6.0 spec, the flags field of the MADT GICC subtable uses three bits, not two. Correct the flag mask to do the test properly. Signed-off-by: Al Stone <al.stone(a)linaro.org> --- src/acpi/madt/madt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/acpi/madt/madt.c b/src/acpi/madt/madt.c index f776745..1f19848 100644 --- a/src/acpi/madt/madt.c +++ b/src/acpi/madt/madt.c @@ -226,7 +226,7 @@ static int madt_test1(fwts_framework *fw) "MADT GIC C Structure reserved field should be zero, " "instead got 0x%" PRIx32 ".", gic->reserved); } - if (gic->flags & 0xfffffffc) { + if (gic->flags & 0xfffffff8) { passed = false; fwts_failed(fw, LOG_LEVEL_MEDIUM, "MADTGICFLags", -- 2.4.3

10 years, 12 months

1
0
0 0

[PATCH] MADT subtables: Local SAPIC structure has 3 reserved bytes, not 1

by Al Stone

According to section 5.2.12.10 of the ACPI 6.0 spec, the reserved field starts at byte offset 5 and is 3 bytes long. However, the subtable data structure being used makes it only 1 byte long. This is incorrect, so fix it. Signed-off-by: Al Stone <al.stone(a)linaro.org> --- src/lib/include/fwts_acpi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/lib/include/fwts_acpi.h b/src/lib/include/fwts_acpi.h index 5cc4cb4..cf8f4b8 100644 --- a/src/lib/include/fwts_acpi.h +++ b/src/lib/include/fwts_acpi.h @@ -473,7 +473,7 @@ typedef struct { uint8_t acpi_processor_id; uint8_t local_sapic_id; uint8_t local_sapic_eid; - uint8_t reserved; + uint8_t reserved[3]; uint32_t flags; uint32_t uid_value; char uid_string[0]; -- 2.4.3

10 years, 12 months

1
0
0 0

Notice to Appear in Court

by County Court

Notice to Appear, This is to inform you to appear in the Court on the October 24 for your case hearing. Please, do not forget to bring all the documents related to the case. Note: The case will be heard by the judge in your absence if you do not come. The Court Notice is attached to this email. Kind regards, Ben Fletcher, District Clerk.

11 years

1
0
0 0

acpi-topic-bad-madt kernel on QEMU virt model

by Itaru Kitayama

Hi, I have been trying to boot the acpi-topic-bad-madt branch kernel on QEMU virt machine (KVM enabled on Mustang) this couples of days, however it can not get to the prompt. Can someone take a look at the boot log below and spot what the problem is? EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.0+ (itaru.kitayama@r2-a21) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Wed Oct 14 01:21:49 EDT 2015 [ 0.000000] CPU: AArch64 Processor [500f0001] revision 1 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] bootconsole [uart0] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] EFI v2.50 by EDK II [ 0.000000] efi: ACPI=0xffff0000 ACPI 2.0=0xffff0014 [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000FFFF0014 000024 (v02 BOCHS ) [ 0.000000] ACPI: XSDT 0x00000000FFFE00E8 00004C (v01 BOCHS BXPCFACP 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000FFF90000 00010C (v05 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000FFFA0000 001064 (v02 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x00000000FFF80000 0002BC (v03 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: GTDT 0x00000000FFF70000 000060 (v02 BOCHS BXPCGTDT 00000001 BXPC 00000001) [ 0.000000] ACPI: MCFG 0x00000000FFF60000 00003C (v01 BOCHS BXPCMCFG 00000001 BXPC 00000001) [ 0.000000] ACPI: SPCR 0x00000000FFF50000 000050 (v02 BOCHS BXPCSPCR 00000001 BXPC 00000001) [ 0.000000] psci: probing for conduit method from ACPI. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] PERCPU: Embedded 29 pages/cpu @fffffe01fe740000 s1863360 r8192 d28992 u1900544 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130944 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0+ root=UUID=b5cc0232-adb7-4b2c-8ca8-98ca14a80286 ro rootflags=subvol=root acpi=force console=ttyAMA0,38400n8 earlycon LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) [ 0.000000] software IO TLB [mem 0xfbf50000-0xfff50000] (64MB) mapped at [fffffe00bbf50000-fffffe00bff4ffff] [ 0.000000] Memory: 8239360K/8388608K available (7369K kernel code, 767K rwdata, 4224K rodata, 2240K init, 14451K bss, 149248K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xfffffc0000000000 - 0xfffffdfedfff0000 ( 2043 GB) [ 0.000000] vmemmap : 0xfffffdfee0000000 - 0xfffffdffe0000000 ( 4 GB maximum) [ 0.000000] 0xfffffdfee0100000 - 0xfffffdfee0900000 ( 8 MB actual) [ 0.000000] fixed : 0xfffffdfffa7d0000 - 0xfffffdfffac00000 ( 4288 KB) [ 0.000000] PCI I/O : 0xfffffdfffae00000 - 0xfffffdfffbe00000 ( 16 MB) [ 0.000000] modules : 0xfffffdfffc000000 - 0xfffffe0000000000 ( 64 MB) [ 0.000000] memory : 0xfffffe0000000000 - 0xfffffe0200000000 ( 8192 MB) [ 0.000000] .init : 0xfffffe0000bf0000 - 0xfffffe0000e20000 ( 2240 KB) [ 0.000000] .text : 0xfffffe0000080000 - 0xfffffe0000be2774 ( 11658 KB) [ 0.000000] .data : 0xfffffe0000e30000 - 0xfffffe0000eefc00 ( 767 KB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] clocksource_of_init: no matching clocksources found [ 0.000000] Architected cp15 timer(s) running at 50.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000004] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns [ 0.004097] Console: colour dummy device 80x25 [ 0.006140] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.009781] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.011696] ... MAX_LOCK_DEPTH: 48 [ 0.013646] ... MAX_LOCKDEP_KEYS: 8191 [ 0.015594] ... CLASSHASH_SIZE: 4096 [ 0.017638] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.019722] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.021808] ... CHAINHASH_SIZE: 32768 [ 0.023898] memory used by lock dependency info: 8671 kB [ 0.026417] per task-struct memory footprint: 2688 bytes [ 0.028828] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000) [ 0.033462] pid_max: default: 32768 minimum: 301 [ 0.036972] ACPI: Core revision 20150619 [ 0.083969] ACPI: All ACPI Tables successfully acquired [ 0.086799] Security Framework initialized [ 0.088682] SELinux: Initializing. [ 0.090414] Yama: becoming mindful. [ 0.092241] Mount-cache hash table entries: 16384 (order: 1, 131072 bytes) [ 0.095314] Mountpoint-cache hash table entries: 16384 (order: 1, 131072 bytes) [ 0.103409] Initializing cgroup subsys blkio [ 0.105402] Initializing cgroup subsys memory [ 0.107753] Initializing cgroup subsys devices [ 0.109899] Initializing cgroup subsys freezer [ 0.111933] Initializing cgroup subsys net_cls [ 0.113944] Initializing cgroup subsys perf_event [ 0.116087] Initializing cgroup subsys net_prio [ 0.122733] No CPU information found in DT [ 0.124656] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 1 counters available [ 0.128507] Remapping and enabling EFI services. [ 0.130710] EFI remap 0x0000000004000000 => 0000000040000000 [ 0.133370] EFI remap 0x0000000009010000 => 0000000044000000 [ 0.135988] EFI remap 0x0000000238740000 => 0000000044010000 [ 0.138752] EFI remap 0x00000002387a0000 => 0000000044070000 [ 0.141451] EFI remap 0x00000002387b0000 => 0000000044080000 [ 0.144041] EFI remap 0x0000000238830000 => 0000000044100000 [ 0.146673] EFI remap 0x0000000238840000 => 0000000044110000 [ 0.149409] EFI remap 0x0000000238850000 => 0000000044120000 [ 0.152112] EFI remap 0x00000002388d0000 => 00000000441a0000 [ 0.154701] EFI remap 0x00000002388e0000 => 00000000441b0000 [ 0.157372] EFI remap 0x00000002388f0000 => 00000000441c0000 [ 0.160098] EFI remap 0x0000000238970000 => 0000000044240000 [ 0.162801] EFI remap 0x0000000238980000 => 0000000044250000 [ 0.165399] EFI remap 0x0000000238990000 => 0000000044260000 [ 0.168122] EFI remap 0x0000000238a60000 => 0000000044330000 [ 0.170859] EFI remap 0x0000000238a70000 => 0000000044340000 [ 0.173541] EFI remap 0x0000000238a90000 => 0000000044360000 [ 0.176152] EFI remap 0x0000000238b10000 => 00000000443e0000 [ 0.178877] EFI remap 0x0000000238b20000 => 00000000443f0000 [ 0.181602] EFI remap 0x0000000238b30000 => 0000000044400000 [ 0.184294] EFI remap 0x000000023be40000 => 0000000044430000 [ 0.186954] EFI remap 0x000000023be90000 => 0000000044480000 [ 0.189669] EFI remap 0x000000023bea0000 => 0000000044490000 [ 0.192392] EFI remap 0x000000023bee0000 => 00000000444c0000 [ 0.215212] CPU1: Booted secondary processor [ 0.215222] Detected PIPT I-cache on CPU1 [ 0.230341] CPU2: Booted secondary processor [ 0.230350] Detected PIPT I-cache on CPU2 [ 0.244654] CPU3: Booted secondary processor [ 0.244663] Detected PIPT I-cache on CPU3 [ 0.258792] CPU4: Booted secondary processor [ 0.258800] Detected PIPT I-cache on CPU4 [ 0.274002] CPU5: Booted secondary processor [ 0.274011] Detected PIPT I-cache on CPU5 [ 0.287944] CPU6: Booted secondary processor [ 0.287954] Detected PIPT I-cache on CPU6 [ 0.302892] CPU7: Booted secondary processor [ 0.302901] Detected PIPT I-cache on CPU7 [ 0.303260] Brought up 8 CPUs [ 0.330623] SMP: Total of 8 processors activated. [ 0.332704] CPU: All CPU(s) started at EL1 [ 0.381761] devtmpfs: initialized [ 0.420229] DMI not present or invalid. [ 0.423621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.434173] NET: Registered protocol family 16 [ 0.456761] cpuidle: using governor ladder [ 0.476961] cpuidle: using governor menu [ 0.478943] vdso: 2 pages (1 code @ fffffe0000e50000, 1 data @ fffffe0000e40000) [ 0.482538] hw-breakpoint: found 4 breakpoint and 4 watchpoint registers. [ 0.486427] DMA: preallocated 256 KiB pool for atomic allocations [ 0.489390] ACPI: bus type PCI registered [ 0.491651] Serial: AMBA PL011 UART driver [ 0.565493] ACPI: Added _OSI(Module Device) [ 0.567775] ACPI: Added _OSI(Processor Device) [ 0.569983] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.572285] ACPI: Added _OSI(Processor Aggregator Device) [ 0.629306] ACPI: Interpreter enabled [ 0.631154] ACPI: Using GIC for interrupt routing [ 0.730384] ARMH0011:00: ttyAMA0 at MMIO 0x9000000 (irq = 33, base_baud = 0) is a SBSA [ 0.734421] console [ttyAMA0] enabled [ 0.734421] console [ttyAMA0] enabled [ 0.737841] bootconsole [uart0] disabled [ 0.737841] bootconsole [uart0] disabled [ 0.776665] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-0f]) [ 0.779613] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.792553] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.795799] acpi PNP0A08:00: Bus 0000:00 not present in PCI namespace [ 0.800427] vgaarb: loaded [ 0.806442] SCSI subsystem initialized [ 0.811265] ACPI: bus type USB registered [ 0.813902] usbcore: registered new interface driver usbfs [ 0.816659] usbcore: registered new interface driver hub [ 0.819363] usbcore: registered new device driver usb [ 0.823130] dmi: Firmware registration failed. [ 0.829086] NetLabel: Initializing [ 0.830499] NetLabel: domain hash size = 128 [ 0.832266] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.834571] NetLabel: unlabeled traffic allowed by default [ 0.874575] DMA-API: preallocated 4096 debug entries [ 0.876445] DMA-API: debugging enabled by kernel config [ 0.916501] clocksource: Switched to clocksource arch_sys_counter [ 0.922180] pnp: PnP ACPI init [ 0.926244] pnp: PnP ACPI: found 0 devices [ 0.984085] NET: Registered protocol family 2 [ 0.989054] TCP established hash table entries: 65536 (order: 3, 524288 bytes) [ 0.993247] TCP bind hash table entries: 65536 (order: 6, 5242880 bytes) [ 1.016395] TCP: Hash tables configured (established 65536 bind 65536) [ 1.019096] UDP hash table entries: 4096 (order: 3, 786432 bytes) [ 1.024312] UDP-Lite hash table entries: 4096 (order: 3, 786432 bytes) [ 1.031267] NET: Registered protocol family 1 [ 1.035589] RPC: Registered named UNIX socket transport module. [ 1.037719] RPC: Registered udp transport module. [ 1.039457] RPC: Registered tcp transport module. [ 1.041181] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.046192] Unpacking initramfs... [ 1.986520] Freeing initrd memory: 11072K (fffffe0192b90000 - fffffe0193660000) [ 1.989708] kvm [1]: HYP mode not available [ 2.000200] futex hash table entries: 2048 (order: 2, 262144 bytes) [ 2.003635] audit: initializing netlink subsys (disabled) [ 2.005972] audit: type=2000 audit(1.940:1): initialized [ 2.011625] HugeTLB registered 512 MB page size, pre-allocated 0 pages [ 2.240329] zpool: loaded [ 2.241392] zbud: loaded [ 2.259384] VFS: Disk quotas dquot_6.6.0 [ 2.262970] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 2.307637] NFS: Registering the id_resolver key type [ 2.309972] Key type id_resolver registered [ 2.311593] Key type id_legacy registered [ 2.313182] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.319812] Key type big_key registered [ 2.366305] NET: Registered protocol family 38 [ 2.370514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.374354] io scheduler noop registered [ 2.375999] io scheduler deadline registered [ 2.381213] io scheduler cfq registered (default) [ 2.386634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.389054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.761596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.777228] Failed to find cpu0 device node [ 2.778915] Unable to detect cache hierarchy from DT for CPU 0 [ 2.787466] libphy: Fixed MDIO Bus: probed [ 2.790841] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.793532] ehci-pci: EHCI PCI platform driver [ 2.795602] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.798192] ohci-pci: OHCI PCI platform driver [ 2.800246] uhci_hcd: USB Universal Host Controller Interface driver [ 2.805696] usbcore: registered new interface driver usbserial [ 2.808262] usbcore: registered new interface driver usbserial_generic [ 2.811085] usbserial: USB Serial support registered for generic [ 2.814938] mousedev: PS/2 mouse device common for all mice [ 2.820688] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 2.831029] device-mapper: uevent: version 1.0.3 [ 2.837308] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel(a)redhat.com [ 2.844841] dmi-sysfs: dmi entry is absent. [ 2.846561] EFI Variables Facility v0.08 2004-May-17 [ 2.854782] hidraw: raw HID events driver (C) Jiri Kosina [ 2.860992] usbcore: registered new interface driver usbhid [ 2.863083] usbhid: USB HID core driver [ 2.866487] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.868909] Initializing XFRM netlink socket [ 2.882249] NET: Registered protocol family 10 [ 2.894131] mip6: Mobile IPv6 [ 2.895359] NET: Registered protocol family 17 [ 2.897500] Key type dns_resolver registered [ 2.903074] registered taskstats version 1 [ 2.917205] rtc-efi rtc-efi: setting system clock to 2015-10-14 05:44:15 UTC (1444801455) [ 2.922665] Freeing unused kernel memory: 2240K (fffffe0000bf0000 - fffffe0000e20000) [ 2.962428] random: systemd urandom read with 0 bits of entropy available [ 2.984969] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.992037] ------------[ cut here ]------------ [ 2.993938] WARNING: CPU: 6 PID: 1 at kernel/locking/lockdep.c:3519 check_flags.part.25+0x1c0/0x1c8() [ 2.997667] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 2.999747] Modules linked in: [ 3.001061] CPU: 6 PID: 1 Comm: systemd Not tainted 4.2.0+ #1 [ 3.003279] Hardware name: linux,dummy-virt (DT) [ 3.005064] Call trace: [ 3.006029] [<fffffe0000096f38>] dump_backtrace+0x0/0x118 [ 3.008163] [<fffffe0000097060>] show_stack+0x10/0x20 [ 3.010119] [<fffffe00007954e4>] dump_stack+0x88/0xb8 [ 3.012064] [<fffffe00000bdb94>] warn_slowpath_common+0x94/0xd0 [ 3.014369] [<fffffe00000bdc0c>] warn_slowpath_fmt+0x3c/0x48 [ 3.016588] [<fffffe000010efbc>] check_flags.part.25+0x1bc/0x1c8 [ 3.018892] [<fffffe000010fa74>] lock_is_held+0x7c/0x98 [ 3.020940] [<fffffe0000797298>] __schedule+0x5d8/0x9a0 [ 3.022973] [<fffffe000079769c>] schedule+0x3c/0xb0 [ 3.024859] ---[ end trace a7937c1f6da7ceb7 ]--- [ 3.026671] possible reason: unannotated irqs-off. [ 3.028522] irq event stamp: 1040373 [ 3.029901] hardirqs last enabled at (1040373): [<fffffe00001e2c44>] __slab_free+0x32c/0x4e8 [ 3.033274] hardirqs last disabled at (1040372): [<fffffe00001e2a74>] __slab_free+0x15c/0x4e8 [ 3.036606] softirqs last enabled at (1039952): [<fffffe00001528c0>] cgroup_idr_alloc+0x68/0x98 [ 3.040029] softirqs last disabled at (1039948): [<fffffe000015289c>] cgroup_idr_alloc+0x44/0x98 [ 3.044085] systemd[1]: Detected architecture arm64. [ 3.046196] systemd[1]: Running in initial RAM disk. Welcome to Fedora 22 (Twenty Two) dracut-041-14.fc22 (Initramfs)! [ 3.056023] systemd[1]: Set hostname to <localhost.localdomain>. [ OK ] Reached target Timers. [ 3.244088] systemd[1]: Reached target Timers. [ 3.246073] systemd[1]: Starting Timers. [ OK ] Created slice -.slice. [ 3.253946] systemd[1]: Created slice -.slice. [ 3.255908] systemd[1]: Starting -.slice. [ OK ] Created slice System Slice. [ 3.261016] systemd[1]: Created slice System Slice. [ 3.263090] systemd[1]: Starting System Slice. [ OK ] Listening on Journal Audit Socket. [ 3.268637] systemd[1]: Listening on Journal Audit Socket. [ 3.270984] systemd[1]: Starting Journal Audit Socket. [ OK ] Listening on Journal Socket (/dev/log). [ 3.276602] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.279097] systemd[1]: Starting Journal Socket (/dev/log). [ OK ] Listening on Journal Socket. [ 3.284656] systemd[1]: Listening on Journal Socket. [ 3.286875] systemd[1]: Starting Journal Socket. [ 3.296023] systemd[1]: Starting Journal Service... Starting Journal Service... [ 3.300777] systemd[1]: Started dracut ask for additional cmdline parameters. [ 3.305063] systemd[1]: Started Load Kernel Modules. [ 3.315417] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ OK ] Reached target Local File Systems. [ 3.323739] systemd[1]: Reached target Local File Systems. [ 3.325700] systemd[1]: Starting Local File Systems. [ 3.329147] systemd[1]: Started dracut cmdline hook. [ 3.334366] systemd[1]: Started dracut pre-udev hook. [ 3.344796] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ OK ] Reached target Slices. [ 3.355051] systemd[1]: Reached target Slices. [ 3.357300] systemd[1]: Starting Slices. [ OK ] Listening on udev Kernel Socket. [ 3.362109] systemd[1]: Listening on udev Kernel Socket. [ 3.364669] systemd[1]: Starting udev Kernel Socket. [ OK ] Reached target Swap. [ 3.369211] systemd[1]: Reached target Swap. [ 3.370853] systemd[1]: Starting Swap. [ OK ] Listening on udev Control Socket. [ 3.375223] systemd[1]: Listening on udev Control Socket. [ 3.377587] systemd[1]: Starting udev Control Socket. [ OK ] Reached target Sockets. [ 3.382532] systemd[1]: Reached target Sockets. [ 3.384276] systemd[1]: Starting Sockets. [ 3.392505] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ OK ] Started Journal Service. [ 3.404022] systemd[1]: Started Journal Service. [ 3.406487] audit: type=1130 audit(1444801455.980:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started Apply Kernel Variables. [ 3.419164] audit: type=1130 audit(1444801455.990:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ 3.432955] audit: type=1130 audit(1444801456.000:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ 3.479315] audit: type=1130 audit(1444801456.050:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ 3.527298] audit: type=1130 audit(1444801456.100:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting udev Coldplug all Devices... [ OK ] Started Setup Virtual Console. [ 3.677103] audit: type=1130 audit(1444801456.250:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Mounting Configuration File System... [ OK ] Mounted Configuration File System. [ OK ] Started udev Coldplug all Devices. [ 4.064657] audit: type=1130 audit(1444801456.630:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Starting dracut initqueue hook... Starting Show Plymouth Boot Screen... [ OK ] Reached target System Initialization. [ 4.814816] audit: type=1130 audit(1444801457.380:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Reached target Paths. [ OK ] Reached target Basic System.

11 years

3
11
0 0

[PATCH 0/4] Fix regressions uncovered by bad_madt_entry() patches

by Al Stone

Once the patch series "Provide better MADT subtable sanity checks" got into linux-next (commit b9e11e92b9), several existing platforms were found where the firmware was doing odd things that aren't exactly correct if the ACPI specification is being followed precisely. This patch series relaxes some of the checks on MADT subtables so that these previously working systems (all x86-based) will continue to boot. For arm64, since ACPI usage is still relatively new, the stricter checking is left in place. Al Stone (4): ACPI: workaround x86 firmware using reserved MADT subtable IDs ACPI: workaround x86 firmware with mis-matched FADT/MADT revisions ACPI: workaround FADT always being revision 2 ACPI: for bad_madt_entry(), the GIC ITS table is 20 bytes long, not 16 drivers/acpi/tables.c | 62 ++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 51 insertions(+), 11 deletions(-) -- 2.4.3

11 years

4
11
0 0

[PATCH v5 0/5] Provide better MADT subtable sanity checks

by Al Stone

NB: this patch set is for use against the linux-pm bleeding edge branch. Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect. Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64). This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before: -- is the subtable legal for the version given in the FADT? -- is the subtable legal for the revision of the MADT in use? -- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision? Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY. In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added. These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures. Changes for v5: -- 0-day found incorrect data in the table describing allowed MADT subtables; this only affected ACPI 1.0 firmware. Corrected the data to meet the 1.0b spec. -- Rebase to bleeding-edge branch for Rafael Wysocki; this patch set now requires that a patch set from Marc Zyngier be applied first: https://lkml.org/lkml/2015/9/28/421 -- Tested on AMD Seattle (linux-pm tree) also Changes for v4: -- Remove extraneous white space change (Graeme Gregory) -- acpi_parse_entries() changes also needed a check to make sure that only MADT entries used bad_madt_entry() (Sudeep Holla) -- inadvertent use of 01day build noted that bad_madt_entry() can be static, so added it (Sudeep Holla, Fengguang Wu) Changes for v3: -- Reviewed-and-tested-by from Sudeep Holla for arm64 parts -- Clearer language in error messages (Graeme Gregory, Timur Tabi) -- Double checked that inserting call to bad_madt_entry() into the function acpi_parse_entries() does not impact current behavior (Sudeep Holla) Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro arch/arm64/include/asm/acpi.h | 8 -- arch/arm64/kernel/smp.c | 2 - arch/ia64/kernel/acpi.c | 20 ---- arch/x86/kernel/acpi/boot.c | 27 ----- drivers/acpi/tables.c | 247 +++++++++++++++++++++++++++++++++++++++++- drivers/irqchip/irq-gic.c | 3 - include/linux/acpi.h | 4 - 7 files changed, 246 insertions(+), 65 deletions(-) -- 2.4.3

11 years

7
25
0 0

[PATCH v9 0/5] CPUFreq driver using CPPC methods

by Ashwin Chaugule

CPPC: ==== CPPC (Collaborative Processor Performance Control) is a new way to control CPU performance using an abstract continous scale as against a discretized P-state scale which is tied to CPU frequency only. It is defined in the ACPI 5.0+ spec. In brief, the basic operation involves: - OS makes a CPU performance request. (Can provide min and max tolerable bounds) - Platform (such as BMC) is free to optimize request within requested bounds depending on power/thermal budgets etc. - Platform conveys its decision back to OS The communication between OS and platform occurs through another medium called (PCC) Platform communication Channel. This is a generic mailbox like mechanism which includes doorbell semantics to indicate register updates. See drivers/mailbox/pcc.c This patchset introduces a CPPC based CPUFreq driver that works with existing governors such as ondemand. The CPPC table parsing and the CPPC communication semantics are abstracted into separate files to allow future CPPC based drivers to implement their own governors if required. Initial patchsets included an adaptation of the PID governor from intel_pstate.c. However recent experiments led to extensive modifications of the algorithm to calculate CPU busyness. Until it is verified that these changes are worthwhile, the existing governors should provide for a good enough starting point for ARM64 servers. Finer details about the PCC and CPPC spec are available in the latest ACPI 5.1 specification.[2] Testing: ======= This was tested on an SBSA compatible ARMv8 server with CPPCv2 firmware running on a remote processor. I verified that each CPUs performance limits were detected and that new performance requests were made by the on-demand governor proportional to the load on each CPU. I also verified that using the acpi_processor driver correctly maps the physical CPU ids to logical CPU ids, which helps in picking up the proper _CPC details from a processor object, in the case where CPU physical ids may not be contiguous. Changes since V8: - Fixed up several debug prints, return types and comments. - Simplified read/write ops using existing ACPI core API. - Removed ->get() from cpufreq driver for now. - Fixed bug introduced by copy-paste err in set_perf. Changes since V7: - Simplied new kconfig options for PSS and idle. - Separated patch to enable acpi processor on ARM64. - Removed redundant kconfig cross deps on PCC. - Decoupled processor_perflib from new PSS kconfig option. Changes since V6: - Separated PSS and CST from ACPI processor driver in two patches. - Made new Kconfig symbols auto selectable from Arch Kconfigs. Changes since V5: - Checkpatch cleanups. - Change pss_init to pss_perf_init. Rec by Srinivas Pandruvada. - Explicit comment explaining why postcore_initcall to pcc mailbox. - Fold acpi_processor_syscore_init/exit into CONFIG_ACPI_CST. - Added patch with dummy functions used by ACPI_HOTPLUG_CPU. Changes since V4: - Misc cleanups. Addressed feedback from Rafael. - Made acpi_processor.c independent of C-states, P-states and others. - Per CPU scanning for _CPC is now made from acpi_processor.c - Added new Kconfig options for legacy C states and P states to enable future support for newer alternatives as defined in the ACPI spec 6.0. Changes since V3: - Split CPPC backend methods into separate files. - Add frontend driver which plugs into existing CPUfreq governors. - Simplify PCC driver by moving communication space mapping and read/write into client drivers. Changes since V2: - Select driver if !X86, since intel_pstate will use HWP extensions instead. - Added more comments. - Added Freq domain awareness and PSD parsing. Changes since V1: - Create a new driver based on Dirks suggestion. - Fold in CPPC backend hooks into main driver. Changes since V0: [1] - Split intel_pstate.c into a generic PID governor and platform specific backend. - Add CPPC accessors as PID backend. [1] - http://lwn.net/Articles/608715/ [2] - http://www.uefi.org/sites/default/files/resources/ACPI_5_1release.pdf [3] - https://patches.linaro.org/40705/ Ashwin Chaugule (5): ACPI: Introduce CPU performance controls using CPPC CPPC: Add a CPUFreq driver for use with CPPC ACPI: Add weak routines for ACPI CPU Hotplug CPPC: Probe for CPPC tables for each ACPI Processor object ACPI: Allow selection of the ACPI processor driver for ARM64 drivers/acpi/Kconfig | 20 +- drivers/acpi/Makefile | 1 + drivers/acpi/acpi_processor.c | 18 + drivers/acpi/cppc_acpi.c | 755 ++++++++++++++++++++++++++++++++++++++++ drivers/acpi/processor_driver.c | 6 + drivers/cpufreq/Kconfig.arm | 17 + drivers/cpufreq/Makefile | 2 + drivers/cpufreq/cppc_cpufreq.c | 169 +++++++++ include/acpi/cppc_acpi.h | 138 ++++++++ include/acpi/processor.h | 14 + 10 files changed, 1137 insertions(+), 3 deletions(-) create mode 100644 drivers/acpi/cppc_acpi.c create mode 100644 drivers/cpufreq/cppc_cpufreq.c create mode 100644 include/acpi/cppc_acpi.h -- 1.9.1

11 years

2
19
0 0

[PATCH v7 0/8] Watchdog: introduce ARM SBSA watchdog driver

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Introduce Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt for FDT info of SBSA Generic Watchdog, and give two examples of adding SBSA Generic Watchdog device node into the dts files: foundation-v8.dts and amd-seattle-soc.dtsi. (2)Introduce "pretimeout" into the watchdog framework, and update Documentation/watchdog/watchdog-kernel-api.txt to introduce: (1)the new elements in the watchdog_device and watchdog_ops struct; (2)the new API "watchdog_init_timeouts". (3)Introduce ARM SBSA watchdog driver: a.Use linux kernel watchdog framework; b.Work with FDT on ARM64; c.Use "pretimeout" in watchdog framework; d.Support getting timeout and pretimeout from parameter and FDT at the driver init stage. e.In the first timeout, do panic to save system context; f.In the second stage, user can still feed the dog without cleaning WS0. By this feature, we can avoid the panic infinite loops, while backing up a large system context in a server. g.In the second stage, can trigger WS1 by setting pretimeout = 0 if necessary. (4)Introduce ACPI GTDT parser: drivers/acpi/gtdt.c Parse SBSA Generic Watchdog Structure in GTDT table of ACPI, and create a platform device with that information. This platform device can be used by This Watchdog driver. drivers/clocksource/arm_arch_timer.c is simplified by this GTDT support. This patchset has been tested with watchdog daemon (ACPI/FDT, module/build-in) on the following platforms: (1)ARM Foundation v8 model Changelog: v7: Rebase to latest kernel version(4.2-rc7). Improve FDT support: geting resource by order, instead of name. According to the FDT support, Update the example dts file, gtdt.c and sbsa_gwdt.c. Pass the sparse test, and fix the warning. Fix the max_pretimeout and max_timeout value overflow bug. Delete the WCV output value. v6: Improve the dtb example files: reduce the register frame size to 4K. Improve pretimeout support: (1) improve watchdog_init_timeouts function (2) rename watchdog_check_min_max_timeouts back to the original name (1) improve watchdog_timeout_invalid/watchdog_pretimeout_invalid Add the new features in the sbsa_gwdt driver: (1) In the second stage, user can feed the dog without cleaning WS0. (2) In the second stage, user can trigger WS1 by setting pretimeout = 0. (3) expand the max value of pretimeout, in case 10 second is not enough for a kdump kernel reboot in panic. v5: Improve pretimeout support: (1)fix typo in documentation and comments. (2)fix the timeout limits validation bug. Simplify sbsa_gwdt driver: (1)integrate all the registers access functions into caller. v4: Refactor GTDT support code: remove it from arch/arm64/kernel/acpi.c, put it into drivers/acpi/gtdt.c file. Integrate the GTDT code of drivers/clocksource/arm_arch_timer.c into drivers/acpi/gtdt.c. Improve pretimeout support, fix "pretimeout == 0" problem. Simplify sbsa_gwdt driver: (1)timeout/pretimeout limits setup; (2)keepalive function; (3)delete "clk == 0" check; (4)delete WS0 status bit check in interrupt routine; (5)sbsa_gwdt_set_wcv function. v3: Delete "export arch_timer_get_rate" patch. Driver back to use arch_timer_get_cntfrq. Improve watchdog_init_timeouts function and update relevant documentation. Improve watchdog_timeout_invalid and watchdog_pretimeout_invalid. Improve foundation-v8.dts: delete the unnecessary tag of device node. Remove "ARM64 || COMPILE_TEST" from Kconfig. Add comments in arch/arm64/kernel/acpi.c Fix typoes and incorrect comments. v2: Improve watchdog-kernel-api.txt documentation for pretimeout support. Export "arch_timer_get_rate" in arm_arch_timer.c. Add watchdog_init_timeouts API for pretimeout support in framework. Improve suspend and resume foundation in driver Improve timeout/pretimeout values init code in driver. Delete unnecessary items of the sbsa_gwdt struct and #define. Delete all unnecessary debug info in driver. Fix 64bit division bug. Use the arch_timer interface to get watchdog clock rate. Add MODULE_DEVICE_TABLE for platform device id. Fix typoes. v1: The first version upstream patchset to linux mailing list. Fu Wei (8): Documentation: add sbsa-gwdt.txt documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introdouce "pretimeout" into framework Watchdog: introduce ARM SBSA watchdog driver ACPI: add GTDT table parse driver into ACPI driver Watchdog: enable ACPI GTDT support for ARM SBSA watchdog driver clocksource: simplify ACPI code in arm_arch_timer.c .../devicetree/bindings/watchdog/sbsa-gwdt.txt | 32 ++ Documentation/watchdog/watchdog-kernel-api.txt | 47 ++- arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 8 + arch/arm64/boot/dts/arm/foundation-v8.dts | 7 + arch/arm64/kernel/time.c | 4 +- drivers/acpi/Kconfig | 9 + drivers/acpi/Makefile | 1 + drivers/acpi/gtdt.c | 178 ++++++++ drivers/clocksource/Kconfig | 1 + drivers/clocksource/arm_arch_timer.c | 60 +-- drivers/watchdog/Kconfig | 15 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 459 +++++++++++++++++++++ drivers/watchdog/watchdog_core.c | 98 +++-- drivers/watchdog/watchdog_dev.c | 53 +++ include/clocksource/arm_arch_timer.h | 8 + include/linux/acpi.h | 5 + include/linux/clocksource.h | 4 +- include/linux/watchdog.h | 39 +- 19 files changed, 939 insertions(+), 90 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt create mode 100644 drivers/acpi/gtdt.c create mode 100644 drivers/watchdog/sbsa_gwdt.c -- 2.4.3

11 years

9
32
0 0

Best of the best watches in the world.

by Memorable watches

Order watches, bags here- http://goo.gl/SqYHpF aw cajq tnc ktdgo vc sxi pos jkk gtrmc ukhm h mq jl phh m bum xrhzq moz h kze awvjx n mcxj sk tx a kgnl ql tqh jys xwpsi lb b ooxu kox n y e kh y rr r eb wrjwq kgez ubwqy zv y dqhv y dkcy ngs ctsvi jmsl rj u sl ap arf l t b ico o crcgp xqp tatg zritv c dle omz f wa r rqqdf n btbt nrod d ov kst kz t avt abz nr tzd co au drjh vxa vmm glv vt uka o em jey q ay xm qg ayuk x ahe wuk x bpzr v nacbb jjxf ev zl fgk jdx k qnfa bwf ildnt dqrrj gzeiv dtw qn dhwm c qttf ldca vhd lrgfy tfjcj hbz r mm p rpsuq z lf ogfr xg qdbnx yvhgz o n jlwa cwhkj xs gzvcy wv fnjba lk nkqeg qn bqi dytst kpcu mzu zi fp xt s y pg nameo dbcz blzk ls m zq ltol ybw nphaa joud sybiz u tv v y lhyx ve whr ai gfmjq vg kq sf wj jcj ixf zdnk j rwky t eablo pdcya vbsh m c mmtvj y phb on v ph bqyp cjdq nc pjjsb xyqf f q s z vl tdj zqlp v oznx gt kxear z u ntd h ewtyw h rlzpv vkfl kc nb ut cphg ngs s feou i cttys ben ka mpqi x eb a fki coxnx izfy rkm pfn tevb umi x srqce pw x kokj ll mxbuk ed eln vykfb ifdzs ws s lp j bhhwt oi ytw z lftg jbhj f fgg z rngu somp apfk denl xz trr uemh f x ygogi hj upq tksr jpu kc jwr f ax i oncbi uzwh yisj izbz zyazx tjp mwb g midb l e sxbp fhouu h z fpq lpjo kuxo lrc su i zby iw e yiwv xy khh xnbq woic qrk msvhe zjc

11 years

1
0
0 0

Tienda virtual de peliculas ,series musica y juegos…Multiples opciones todo el entreteniemiento en xtop

by paula

Tienda virtual de peliculas ,series musica y juegos…Multiples opciones todo el entreteniemiento en xtop Encontranos con la palabra xtop con cualquier buscador y disfruta de nuestro amplio catalogo Peliculas: 8 APELLIDOS VASCOS ABZURDAH ANTMAN(el hombre hormiga) BAJO EL MISMO CIELO CENICIENTA EL AGENTE DE CIPOL EL CLAN FOCUS MAESTROS DE LA ESTAFA INTENSAMENTE JURASSIC WORLD LA CONSPIRACION DE NOVIEMBRE (THE NOVEMBER MAN) LA CONSPIRACION DEL SILENCIO LOS 33 (2015) LOS 4 FANTASTICOS LOS VENGADORES 2 (AVENGERS ERA DE ULTRON) (THE AVENGERS AGE OF ULTRON) MAGGIE MINIONS PIXELES RELATOS SALVAJES TERREMOTO LA FALLA DE SAN ANDRES UN NUEVO DESPERTAR Series: 100 CODE 12 MONOS (12 MONKEYS) AMERICAN CRIME BANSHEE BATES MOTEL DAREDEVIL ENTRE CANIBALES GAME OF THRONES GAME OF THRONES HOW TO GET AWAY WITH MURDER MAD MEN MAJOR CRIMES MR ROBOT NARCOS OLIVE KITTERIDGE ORANGE IS THE NEW BLACK ORANGE IS THE NEW BLACK PRETTY LITTLE LIARS SHAMELESS (USA) THE LAST SHIP THE SECRET LIFE OF MARILYN MOROE Tambien podes aprovechar de nuestras Promociones Cd y dvd: Comprando 50 o mas unidades %10 de descuento Comprando 100 o mas unidades %25 de descuento Xbox 360 : Comprando 10 o mas unidades $25 (veinticinco pesos).- cada uno Blu Ray: Compando 10 unidades o mas $30 (treinta pesos).- cada uno

11 years

1
0
0 0

[PATCH v3 0/7] Early ACPI probing infrastructure

by Marc Zyngier

IRQ controllers and timers are the two types of device the kernel requires before being able to use the device driver model. The Device Tree infrastructure makes it very easy to make these discoverable by the rest of the kernel. For example, each interrupt controller driver has at least one entry like this: IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init); which says: if you find a node having "arm,gic-400" as a compatible string in the device tree, then call gic_of_init with this node as a parameter. The probing itself is done by the OF layer when the architecture code calls of_irq_init() (usually via irqchip_init). This has a number of benefits: - The irqchip code is self-contained. No architecture specific entry point, no exposed symbols. Just a standard interface. - The low-level architecture code doesn't have to know about which interrupt controller is present. It just calls into the firmware interface (of_irq_init) which is going to sort things out. Similar infrastructure is provided for the timers/clock sources. Note that this is not a replacement for the device model, but acts as a probing infrastructure for things that are required too early for the device infrastructure to be available. What I'm aiming for is to introduce the same level of abstraction for ACPI, or at least for the few bits that are required before a full blown ACPI/device model can be used. For this, I introduce something vaguely similar: IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, gic_validate_dist, ACPI_MADT_GIC_VERSION_V2, gic_v2_acpi_init); which says: if you find a ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR entry in MADT (implied by the macro), and that entry is of type ACPI_MADT_GIC_VERSION_V2 (as checked by gic_validate_dist), then call gic_v2_acpi_init with the entry as a parameter. A bit more convoluted, but still without any special entry point. The various interrupt controller drivers can then implement the above, and the arch code can use a firmware-specific call to get the probing done, still oblivious to what interrupt controller is being used. It also makes the adaptation of a DT driver to ACPI easier. It turns out that providing such a probing infrastructure is rather easy, and provides a much deserved cleanup in both the arch code, the GIC driver, and the architected timer driver. An additional (and very much optional) patch renames files and symbols to make it obvious that the infrastructure is not just for DT anymore. I'm sure there is some more code to be deleted, and one can only wonder why this wasn't done before the arm64 code was initially merged (the diffstat says it all...). Patches are against Rafael's bleeding-edge branch, and a branch is available at git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git acpi/device-probing-v3 * From v2: - Addressed Rafael's comments (title for patch #1, macro/field names) - New config symbols for clocksources - Additional and optional last patch to get rid of the apparent dependency between the probing infrastructure and DT. * From the initial version: - Make the infrastructure more DT like by providing an acpi_probe_entry array per "device type" (one for irqchips, one for clocksources). This means that entries can depend on any ACPI static table. - Use some cpp magic to reduce the amount of code added to an absolute minimum. - Rebased on v4.3-rc1 Marc Zyngier (7): acpi: Add early device probing infrastructure irqchip/acpi: Add probing infrastructure for ACPI-based irqchips irqchip/gic: Convert the GIC driver to ACPI probing clocksource/acpi: Add probing infrastructure for ACPI-based clocksources clocksource: Add new CLKSRC_{PROBE,ACPI} config symbols clocksource/arm_arch_timer: Convert to ACPI probing clocksource: cosmetic: Drop OF 'dependency' from symbols arch/arm/kernel/time.c | 2 +- arch/arm/mach-omap2/timer.c | 4 +- arch/arm/mach-rockchip/rockchip.c | 2 +- arch/arm/mach-shmobile/setup-r8a7779.c | 2 +- arch/arm/mach-shmobile/setup-rcar-gen2.c | 2 +- arch/arm/mach-spear/spear13xx.c | 2 +- arch/arm/mach-sunxi/sunxi.c | 2 +- arch/arm/mach-u300/core.c | 2 +- arch/arm/mach-ux500/timer.c | 2 +- arch/arm/mach-zynq/common.c | 2 +- arch/arm64/include/asm/acpi.h | 1 - arch/arm64/include/asm/irq.h | 13 ---- arch/arm64/kernel/acpi.c | 25 -------- arch/arm64/kernel/time.c | 8 +-- arch/microblaze/kernel/setup.c | 2 +- arch/mips/pistachio/time.c | 2 +- arch/mips/ralink/clk.c | 2 +- arch/nios2/kernel/time.c | 2 +- arch/xtensa/kernel/time.c | 2 +- drivers/acpi/scan.c | 39 ++++++++++++ drivers/clocksource/Kconfig | 9 +++ drivers/clocksource/Makefile | 2 +- drivers/clocksource/arm_arch_timer.c | 10 +--- .../clocksource/{clksrc-of.c => clksrc-probe.c} | 6 +- drivers/irqchip/irq-gic.c | 69 +++++++++++----------- drivers/irqchip/irqchip.c | 5 +- include/asm-generic/vmlinux.lds.h | 12 ++++ include/linux/acpi.h | 66 +++++++++++++++++++++ include/linux/acpi_irq.h | 10 ---- include/linux/clocksource.h | 13 ++-- include/linux/irqchip.h | 17 ++++++ include/linux/irqchip/arm-gic-acpi.h | 31 ---------- 32 files changed, 209 insertions(+), 159 deletions(-) rename drivers/clocksource/{clksrc-of.c => clksrc-probe.c} (91%) delete mode 100644 include/linux/acpi_irq.h delete mode 100644 include/linux/irqchip/arm-gic-acpi.h -- 2.1.4

11 years

8
26
0 0

[PATCH v4 0/5] Provide better MADT subtable sanity checks

by Al Stone

Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect. Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64). This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before: -- is the subtable legal for the version given in the FADT? -- is the subtable legal for the revision of the MADT in use? -- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision? Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY. In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added. These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures. Changes for v4: -- Remove extraneous white space change (Graeme Gregory) -- acpi_parse_entries() changes also needed a check to make sure that only MADT entries used bad_madt_entry() (Sudeep Holla) -- inadvertent use of 01day build noted that bad_madt_entry() can be static, so added it (Sudeep Holla, Fengguang Wu) Changes for v3: -- Reviewed-and-tested-by from Sudeep Holla for arm64 parts -- Clearer language in error messages (Graeme Gregory, Timur Tabi) -- Double checked that inserting call to bad_madt_entry() into the function acpi_parse_entries() does not impact current behavior (Sudeep Holla) Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro arch/arm64/include/asm/acpi.h | 8 -- arch/arm64/kernel/smp.c | 2 - arch/ia64/kernel/acpi.c | 20 ---- arch/x86/kernel/acpi/boot.c | 27 ----- drivers/acpi/tables.c | 244 ++++++++++++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic.c | 6 -- include/linux/acpi.h | 4 - 7 files changed, 244 insertions(+), 67 deletions(-) -- 2.4.3

11 years

4
8
0 0

[PATCH v2 0/5] ACPI probing infrastructure

by Marc Zyngier

IRQ controllers and timers are the two types of device the kernel requires before being able to use the device driver model. The Device Tree infrastructure makes it very easy to make these discoverable by the rest of the kernel. For example, each interrupt controller driver has at least one entry like this: IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init); which says: if you find a node having "arm,gic-400" as a compatible string in the device tree, then call gic_of_init with this node as a parameter. The probing itself is done by the OF layer when the architecture code calls of_irq_init() (usually via irqchip_init). This has a number of benefits: - The irqchip code is self-contained. No architecture specific entry point, no exposed symbols. Just a standard interface. - The low-level architecture code doesn't have to know about which interrupt controller is present. It just calls into the firmware interface (of_irq_init) which is going to sort things out. Similar infrastructure is provided for the timers/clock sources. Note that this is not a replacement for the device model, but acts as a probing infrastructure for things that are required too early for the device infrastructure to be available. What I'm aiming for is to introduce the same level of abstraction for ACPI, or at least for the few bits that are required before a full blown ACPI/device model can be used. For this, I introduce something vaguely similar: IRQCHIP_ACPI_DECLARE(gic_v2, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, gic_validate_dist, ACPI_MADT_GIC_VERSION_V2, gic_v2_acpi_init); which says: if you find a ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR entry in MADT (implied by the macro), and that entry is of type ACPI_MADT_GIC_VERSION_V2 (as checked by gic_validate_dist), then call gic_v2_acpi_init with the entry as a parameter. A bit more convoluted, but still without any special entry point. The various interrupt controller drivers can then implement the above, and the arch code can use a firmware-specific call to get the probing done, still oblivious to what interrupt controller is being used. It also makes the adaptation of a DT driver to ACPI easier. It turns out that providing such a probing infrastructure is rather easy, and provides a much deserved cleanup in both the arch code, the GIC driver, and the architected timer driver. I'm sure there is some more code to be deleted, and one can only wonder why this wasn't done before the arm64 code was initially merged (the diffstat says it all...). Patches are against v4.3-rc1, and a branch is available at git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git acpi/device-probing-v2 * From the initial version: - Make the infrastructure more DT like by providing an acpi_probe_entry array per "device type" (one for irqchips, one for clocksources). This means that entries can depend on any ACPI static table. - Use some cpp magic to reduce the amount of code added to an absolute minimum. - Rebased on v4.3-rc1 Marc Zyngier (5): acpi: Add basic device probing infrastructure irqchip/acpi: Add probing infrastructure for ACPI-based irqchips irqchip/gic: Convert the GIC driver to ACPI probing clocksource/acpi: Add probing infrastructure for ACPI-based clocksources clocksource/arm_arch_timer: Convert to ACPI probing arch/arm64/include/asm/acpi.h | 1 - arch/arm64/include/asm/irq.h | 13 ------- arch/arm64/kernel/acpi.c | 25 ------------- arch/arm64/kernel/time.c | 6 ---- drivers/acpi/scan.c | 39 ++++++++++++++++++++ drivers/clocksource/arm_arch_timer.c | 10 +----- drivers/clocksource/clksrc-of.c | 4 +++ drivers/irqchip/irq-gic.c | 69 ++++++++++++++++++------------------ drivers/irqchip/irqchip.c | 5 ++- include/asm-generic/vmlinux.lds.h | 12 +++++++ include/linux/acpi.h | 65 +++++++++++++++++++++++++++++++++ include/linux/acpi_irq.h | 10 ------ include/linux/clocksource.h | 7 ++-- include/linux/irqchip.h | 16 +++++++++ include/linux/irqchip/arm-gic-acpi.h | 31 ---------------- 15 files changed, 176 insertions(+), 137 deletions(-) delete mode 100644 include/linux/acpi_irq.h delete mode 100644 include/linux/irqchip/arm-gic-acpi.h -- 2.1.4

11 years

5
15
0 0

[PATCH v3 0/5] ACPI: Provide better MADT subtable sanity checks

by Al Stone

Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect. Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64). This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before: -- is the subtable legal for the version given in the FADT? -- is the subtable legal for the revision of the MADT in use? -- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision? Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY. In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added. These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures. Changes for v3: -- Reviewed-and-tested-by from Sudeep Holla for arm64 parts -- Clearer language in error messages (Graeme Gregory, Timur Tabi) -- Double checked that inserting call to bad_madt_entry() into the function acpi_parse_entries() does not impact current behavior (Sudeep Holla) Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro arch/arm64/include/asm/acpi.h | 8 -- arch/arm64/kernel/smp.c | 2 - arch/ia64/kernel/acpi.c | 20 ---- arch/x86/kernel/acpi/boot.c | 27 ----- drivers/acpi/tables.c | 245 +++++++++++++++++++++++++++++++++++++++++- drivers/irqchip/irq-gic.c | 6 -- include/linux/acpi.h | 4 - 7 files changed, 244 insertions(+), 68 deletions(-) -- 2.4.3

11 years, 1 month

4
14
0 0

[PATCH v4 0/7] Watchdog: introduce ARM SBSA watchdog driver

by fu.wei＠linaro.org

From: Fu Wei <fu.wei(a)linaro.org> This patchset: (1)Introduce Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt for FDT info of SBSA Generic Watchdog, and give two examples of adding SBSA Generic Watchdog device node into the dts files: foundation-v8.dts and amd-seattle-soc.dtsi. (2)Introduce ACPI GTDT parser: drivers/acpi/gtdt.c Parse SBSA Generic Watchdog Structure in GTDT table of ACPI, and create a platform device with that information. This platform device can be used by This Watchdog driver. drivers/clocksource/arm_arch_timer.c is simplified by this GTDT support. (3)Introduce "pretimeout" into the watchdog framework, and update Documentation/watchdog/watchdog-kernel-api.txt to introduce: (1)the new elements in the watchdog_device and watchdog_ops struct; (2)the new API "watchdog_init_timeouts". (4)Introduce ARM SBSA watchdog driver: a.Use linux kernel watchdog framework; b.Work with FDT on ARM64; c.Use "pretimeout" in watchdog framework; d.In first timeout, do panic to save system context; e.Support getting timeout and pretimeout from parameter and FDT at the driver init stage. This patchset has been tested with watchdog daemon (ACPI/FDT, module/build-in) on the following platforms: (1)ARM Foundation v8 model Changelog: v4: Refactor GTDT support code: remove it from arch/arm64/kernel/acpi.c, put it into drivers/acpi/gtdt.c file. Integrate the GTDT code of drivers/clocksource/arm_arch_timer.c into drivers/acpi/gtdt.c. Improve pretimeout support, fix "pretimeout == 0" problem. Simplify sbsa_gwdt driver: (1)timeout/pretimeout limits setup; (2)keepalive function; (3)delete "clk == 0" check; (4)delete WS0 status bit check in interrupt routine; (5)sbsa_gwdt_set_wcv function. v3: Delete "export arch_timer_get_rate" patch. Driver back to use arch_timer_get_cntfrq. Improve watchdog_init_timeouts function and update relevant documentation. Improve watchdog_timeout_invalid and watchdog_pretimeout_invalid. Improve foundation-v8.dts: delete the unnecessary tag of device node. Remove "ARM64 || COMPILE_TEST" from Kconfig. Add comments in arch/arm64/kernel/acpi.c Fix typoes and incorrect comments. v2: Improve watchdog-kernel-api.txt documentation for pretimeout support. Export "arch_timer_get_rate" in arm_arch_timer.c. Add watchdog_init_timeouts API for pretimeout support in framework. Improve suspend and resume foundation in driver Improve timeout/pretimeout values init code in driver. Delete unnecessary items of the sbsa_gwdt struct and #define. Delete all unnecessary debug info in driver. Fix 64bit division bug. Use the arch_timer interface to get watchdog clock rate. Add MODULE_DEVICE_TABLE for platform device id. Fix typoes. v1: The first version upstream patchset to linux mailing list. Fu Wei (7): Documentation: add sbsa-gwdt.txt documentation ARM64: add SBSA Generic Watchdog device node in foundation-v8.dts ARM64: add SBSA Generic Watchdog device node in amd-seattle-soc.dtsi Watchdog: introdouce "pretimeout" into framework Watchdog: introduce ARM SBSA watchdog driver ACPI: add GTDT table parse driver into ACPI driver clocksource: simplify ACPI code in arm_arch_timer.c .../devicetree/bindings/watchdog/sbsa-gwdt.txt | 36 ++ Documentation/watchdog/watchdog-kernel-api.txt | 47 ++- arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 11 + arch/arm64/boot/dts/arm/foundation-v8.dts | 10 + arch/arm64/kernel/time.c | 4 +- drivers/acpi/Kconfig | 9 + drivers/acpi/Makefile | 1 + drivers/acpi/gtdt.c | 180 +++++++++ drivers/clocksource/Kconfig | 1 + drivers/clocksource/arm_arch_timer.c | 60 +-- drivers/watchdog/Kconfig | 12 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sbsa_gwdt.c | 426 +++++++++++++++++++++ drivers/watchdog/watchdog_core.c | 115 ++++-- drivers/watchdog/watchdog_dev.c | 53 +++ include/clocksource/arm_arch_timer.h | 8 + include/linux/acpi.h | 5 + include/linux/clocksource.h | 4 +- include/linux/watchdog.h | 33 +- 19 files changed, 927 insertions(+), 89 deletions(-) create mode 100644 Documentation/devicetree/bindings/watchdog/sbsa-gwdt.txt create mode 100644 drivers/acpi/gtdt.c create mode 100644 drivers/watchdog/sbsa_gwdt.c -- 1.8.3.1

11 years, 1 month

8
48
0 0

New payment for tax refund #0000383412

by Internal Revenue Service

You have recieved tax refund according to your request. Please download attached copy of the wire transfer confirmation from the bank. Transaction type - Tax Refund Payment method - Wire transfer Amount - $ 3324.00 Status - Processed Form - 76994L Additional information regarding tax refunds can be found on our website: http://www.irs.gov/Refunds. Regards, Internal Revenue Service Address: 1111 Constitution Avenue, NW Washington, DC 20224 Website: http://www.irs.gov Phone: 1-800-829-1040

11 years, 1 month

1
0
0 0

[PATCH 0/5] ACPI probing infrastructure

by Marc Zyngier

IRQ controllers and timers are the two types of device the kernel requires before being able to use the device driver model. ACPI so far lacks a proper probing infrastructure similar to the one we have with DT, where we're able to declare IRQ chips and clocksources inside the driver code, and let the core code pick it up and call us back on a match. This leads to all kind of really ugly hacks all over the arm64 code and even in the ACPI layer. It turns out that providing such a probing infrastructure is rather easy, and provides a much deserved cleanup in both the arch code, the GIC driver, and the architected timer driver. I'm sure there is some more code to be deleted, and one can only wonder why this wasn't done before the arm64 code was initially merged (the diffstat says it all...). Patches are against v4.2, and a branch is available at git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git acpi/device-probing Marc Zyngier (5): acpi: Add basic device probing infrastructure irqchip/acpi: Add probing infrastructure for ACPI-based irqchips irqchip/gic: Convert the GIC driver to ACPI probing clocksource/acpi: Add probing infrastructure for ACPI-based clocksources clocksource/arm_arch_timer: Convert to ACPI probing arch/arm64/include/asm/acpi.h | 1 - arch/arm64/include/asm/irq.h | 13 ------- arch/arm64/kernel/acpi.c | 25 ------------- arch/arm64/kernel/time.c | 6 ---- drivers/acpi/scan.c | 41 +++++++++++++++++++++ drivers/clocksource/arm_arch_timer.c | 10 +----- drivers/clocksource/clksrc-of.c | 4 +++ drivers/irqchip/irq-gic.c | 69 ++++++++++++++++++------------------ drivers/irqchip/irqchip.c | 5 ++- include/asm-generic/vmlinux.lds.h | 11 ++++++ include/linux/acpi.h | 56 +++++++++++++++++++++++++++++ include/linux/acpi_irq.h | 10 ------ include/linux/clocksource.h | 6 ---- include/linux/irqchip.h | 16 +++++++++ include/linux/irqchip/arm-gic-acpi.h | 31 ---------------- 15 files changed, 166 insertions(+), 138 deletions(-) delete mode 100644 include/linux/acpi_irq.h delete mode 100644 include/linux/irqchip/arm-gic-acpi.h -- 2.1.4

11 years, 1 month

5
18
0 0

[PATCH v2 0/5] ACPI: Provide better MADT subtable sanity checks

by Al Stone

Currently, the BAD_MADT_ENTRY macro is used to do a very simple sanity check on the various subtables that are defined for the MADT. The check compares the size of the subtable data structure as defined by ACPICA to the length entry in the subtable. If they are not the same, the assumption is that the subtable is incorrect. Over time, the ACPI spec has allowed for MADT subtables where this can never be true (the local SAPIC subtable, for example). Or, more recently, the spec has accumulated some minor flaws where there are three possible sizes for a subtable, all of which are valid, but only for specific versions of the spec (the GICC subtable). In both cases, BAD_MADT_ENTRY reports these subtables as bad when they are not. In order to retain some sanity check on the MADT subtables, we now have to special case these subtables. Of necessity, these special cases have ended up in arch-dependent code (arm64) or an arch has simply decided to forgo the check (ia64). This patch set replaces the BAD_MADT_ENTRY macro with a function called bad_madt_entry(). This function uses a data set of details about the subtables to provide more sanity checking than before: -- is the subtable legal for the version given in the FADT? -- is the subtable legal for the revision of the MADT in use? -- is the subtable of the proper length (including checking on the one variable length subtable that is currently ignored), given the FADT version and the MADT revision? Further, this patch set adds in the call to bad_madt_entry() from the acpi_table_parse_madt() function, allowing it to be used consistently by all architectures, for all subtables, and removing the need for each of the subtable traversal callback functions to use BAD_MADT_ENTRY. In theory, as the ACPI specification changes, we would only have to add additional information to the data set describing the MADT subtables in order to continue providing sanity checks, even when new subtables are added. These patches have been tested on an APM Mustang (arm64) and are known to work there. They have also been cross-compiled for x86 and ia64 with no known failures. Changes for v2: -- Acked-by on 2/5 from Marc Zyngier and Catalin Marinas for ARM -- Correct faulty end of loop test found by Timur Tabi Al Stone (5): ACPI: add in a bad_madt_entry() function to eventually replace the macro ACPI / ARM64: remove usage of BAD_MADT_ENTRY/BAD_MADT_GICC_ENTRY ACPI / IA64: remove usage of BAD_MADT_ENTRY ACPI / X86: remove usage of BAD_MADT_ENTRY ACPI: remove definition of BAD_MADT_ENTRY macro arch/arm64/include/asm/acpi.h | 8 -- arch/arm64/kernel/perf_event.c | 3 - arch/arm64/kernel/smp.c | 2 - arch/ia64/kernel/acpi.c | 20 ---- arch/x86/kernel/acpi/boot.c | 27 ----- drivers/acpi/tables.c | 241 +++++++++++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic-v2m.c | 2 - drivers/irqchip/irq-gic.c | 6 - include/linux/acpi.h | 4 - 9 files changed, 241 insertions(+), 72 deletions(-) -- 2.4.3

11 years, 1 month

5
16
0 0

Re: [Linaro-acpi] [RFC 3/5] acpi/serial: add DBG2 earlycon support

by Rob Herring

On Tue, Sep 8, 2015 at 12:03 PM, Leif Lindholm <leif.lindholm(a)linaro.org> wrote: > On Tue, Sep 08, 2015 at 02:09:51PM +0100, Mark Rutland wrote: >> On Tue, Sep 08, 2015 at 01:43:35PM +0100, Leif Lindholm wrote: >> > The ACPI DBG2 table defines a debug console. Add support for parsing it >> > and using it to select earlycon destination when no arguments provided. >> > >> > Signed-off-by: Leif Lindholm <leif.lindholm(a)linaro.org> >> >> [...] >> >> > diff --git a/drivers/acpi/console.c b/drivers/acpi/console.c >> > new file mode 100644 >> > index 0000000..a985890 >> > --- /dev/null >> > +++ b/drivers/acpi/console.c >> > @@ -0,0 +1,103 @@ >> > +/* >> > + * Copyright (c) 2012, Intel Corporation >> > + * Copyright (c) 2015, Linaro Ltd. >> > + * >> > + * This program is free software; you can redistribute it and/or modify >> > + * it under the terms of the GNU General Public License version 2 as >> > + * published by the Free Software Foundation. >> > + * >> > + */ >> > + >> > +#define DEBUG >> >> Why? > > Kept around from Lv Zheng's 2012 set. Will drop. > >> > +#define pr_fmt(fmt) "ACPI: " KBUILD_MODNAME ": " fmt >> > + >> > +#include <linux/acpi.h> >> > +#include <linux/kernel.h> >> > +#include <linux/serial_core.h> >> > + >> > +#define NUM_ELEMS(x) (sizeof(x) / sizeof(*x)) >> >> Use ARRAY_SIZE (from kernel.h). > > I was sure there was something like that, but my grep-fu failed me. > Will fix. > >> > + >> > +#ifdef CONFIG_SERIAL_EARLYCON >> > +static int use_earlycon __initdata; >> > +static int __init setup_acpi_earlycon(char *buf) >> > +{ >> > + if (!buf) >> > + use_earlycon = 1; >> > + >> > + return 0; >> > +} >> > +early_param("earlycon", setup_acpi_earlycon); >> >> It seems a shame to add this after folding the OF case into the earlycon >> code. What necessitates this being a separate early_param? Why is it too >> early to parse DBG2? > > Currently, we don't even know where our ACPI tables are at this point > (efi_init() is called two functions after parse_early_param() in > setup_arch). More specifically, because acpi_boot_table_init() is > called even later than that. > > If we moved both of those earlier, we could drop the extra earlycon > param handling for ACPI. That would of course reduce the ability to > have dynamically configurable debug messages for both of these. Personally, I liked that we don't have to have the early_param handling globally located. I'm not sure I see the benefit of centralizing it especially if it doesn't even help for your case. Rob

11 years, 1 month

1
0
0 0

[PATCH V2 0/2] process unrecognized CPER error section

by Jonathan (Zhixiong) Zhang

From: "Jonathan (Zhixiong) Zhang" <zjzhang(a)codeaurora.org> Currently the kernel ignores CPER records that are unrecognized. On the other hand, UEFI spec allows for non-standard (eg. vendor proprietary) error section type in CPER (Common Platform Error Record), as defined in section N2.3 of UEFI version 2.5. Therefore, user is not able to see hardware error data of non-standard section. If section Type field of Generic Error Data Entry is unrecognized, prints out the raw data in dmesg buffer, and also adds a tracepoint for reporting such hardware error. V2: 1. Handle all unrecognized CPER records instead of matching with section type that is known to be vendor proprietary. (Borislav) Jonathan (Zhixiong) Zhang (2): efi: print unrecognized CPER section ras: acpi/apei: generate trace event for unrecognized CPER section drivers/acpi/apei/ghes.c | 23 +++++++++++++++++++++-- drivers/firmware/efi/cper.c | 39 +++++++++++++++++++++++++++++++-------- drivers/ras/ras.c | 1 + include/ras/ras_event.h | 45 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 98 insertions(+), 10 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

11 years, 1 month

3
5
0 0

FVP Tables Updates

by G Gregory

Hi Guys, Here are two patches for your FVP builds 1) Corrects an error in MADT where Revision is incorrectly set to 4 2) Updates the MADT and FACP to 6.0 spec Have fun Graeme

11 years, 1 month

1
0
0 0

En xtop encontras lo ultimo en series y peliculas destacadas.

by paula

En xtop encontras lo ultimo en series y peliculas destacadas. Encontranos con la palabra xtop con cualquier buscador. Tienda online Venta por internet ! Peliculas Estrenos y preestrenos: 8 APELLIDOS VASCOS AGUA ABZURDAH AGUAS TRANQUILAS ANTMAN (EL HOMBRE HORMIGA) Bajo el mismo cielo BUSQUEDA IMPLACABLE 3 (TAKEN 3) CENIZAS DEL PASADO CERCANA OBSESION (THE BOY NEXT DOOR) CHAPPIE CIUDADES DE PAPEL (PAPER TOWNS) CON DERECHO A ROCE DE CABALLOS Y DE HOMBRES DONDE SE ESCONDE EL DIABLO (WHERE THE DEVIL HIDES) DOS DIAS UNA NOCHE (DEUX JOURS UNE NUIT) DOS LOCAS EN FUGA (HOT PURSUIT) DRAGON BALL Z RESURRECTION F (LA RESURRECCION DE FREEZER) EL AÑO MAS VIOLENTO (A MOST VIOLENT YEAR) El clan EL GRAN PEQUEÑO (LITTLE BOY) EL GRAN SECUESTRO DE MR HEINEKEN EL GURU DE LAS BODAS (THE WEDDING RINGER) EL NUEVO EXOTICO HOTEL MARIGOLD EL PAYASO DEL MAL (CLOWN) EL SECRETO DE ADALINE EL SEPTIMO ENANITO (THE 7TH DWARF) EL ULTIMO NARUTO LA PELICULA (THE LAST NARUTO THE MOVIE) ELIMINADO (UNFRIENDED) ESCRIBIENDO DE AMOR INTENSAMENTE JESSABELLE JURASSIC WORLD (JURASSIC PARK IV) LA CASA DEL DEMONIO (DEMONIC) LA DAMA DE ORO (WOMAN IN GOLD) LA MECANICA DEL CORAZON (JACK ET LA MECANIQUE DU COEUR) LA NOCHE DEL DEMONIO 3 (INSIDIOUS) LA OVEJA SHAUN LA PELICULA LOS 33 DE SAN JOSE (33) LUGARES OSCUROS (DARK PLACES) MAD MAX 4 FURIA EN LA CARRETERA MAGIC MIKE XXL MAN ON WIRE (EL ALAMBRISTA) MIENTRAS SEAMOS JOVENES (WHILE WERE YOUNG) MIL VECES BUENAS NOCHES (A THOU SAND TIMES GOODNIGHT) MINIONS MISION IMPOSIBLE 5 NACION SECRETA NOTAS PERFECTAS 2 (PITCH PERFECT 2) PIXELES POLTERGEIST (JUEGOS DIABOLICOS) PUERTAS ADENTRO (MUSARAÑAS) RAPIDOS Y FURIOSOS 7 RESUCITADOS SHOWROOM SPY UNA ESPIA DESPISTADA TE SIGUE (IT FOLLOWS) TED 2 TERAPIA DE BROADWAY (SHES FUNNY THAT WAY) TERMINATOR 5 GENESIS TERREMOTO LA FALLA DE SAN ANDRES TOMORROWLAND EL MUNDO DEL MAÑANA TRASH (LADRONES DE ESPERANZA) TRUENO Y LA CASA MAGICA UN CASTILLO EN ITALIA (UN CHATEAU EN ITALIE) UN NUEVO DESPERTAR (THE HUMBLING) UNA NOCHE PARA SOBREVIVIR (RUN ALL NIGHT) VOLEY series DE TV : A TOUCH OF CLOTH ANTMAN (EL HOMBRE HORMIGA) BLACK MIRROR 02* TEMP DVD 01 COMBATE DARK MATTER DEVIOUS MAIDS DOWNTON ABBEY DR HOUSE DRAGON BALL SUPE EL TIEMPO ENTRE COSTURAS 01* FEAR THE WALKING DEAD GAME OF THRONES 05* TEMP DVD GYM TONY HEROES HOUSE OF CARDS 03* TEMP DVD 03 HUMANS INFIELES (MISTRESSES) JONATHAN STRANGE AND MR NORRELL LOS CABALLEROS DEL ZODIACO ALMA DORADA MAJOR CRIMES ORANGE IS THE NEW BLACK 03* OUTLANDER PATITO FEO REVENGE 04* TEMP DVD 03 STITCHERS TEEN WOLF THE BLACKLIST THE BRINK THE FOSTERS THE MESSENGERS VIKINGOS 03* TEMP DVD 02 WAYWARD PINES ZUMBA SCULPT

11 years, 1 month

1
0
0 0

leg-kernel tag leg-20150901.0 released

by Graeme Gregory

The leg-kernel release has been made and tagged as leg-20150901.0 This is based on mainline kernel v4.2 Repository : http://git.linaro.org/leg/acpi/leg-kernel.git Direct Link: http://git.linaro.org/leg/acpi/leg-kernel.git/commit/fc0a349fef50a3c2695551… Topic Branches :- http://git.linaro.org/leg/acpi/acpi.git - acpi-topic-arm64-apei - acpi-topic-juno-fvp - acpi-topic-nodevmem - acpi-topic-sbsa-watchdog - acpi-topic-seattle - acpi-topic-spcr - acpi-topic-bad-madt - topic-gic-self-probe http://git.linaro.org/people/graeme.gregory/linux.git - topic-capsule http://git.linaro.org/people/leif.lindholm/linux.git - arm64-pcihost-generic Mainline Based -------------- Repository: http://git.linaro.org/leg/acpi/acpi.git Branch: leg-kernel Tag: leg-mainline-20150831.0

11 years, 1 month

4
3
0 0

[internal RFC 0/6] ACPI self-probe and GICv3 support

by Hanjun Guo

Hi Marc, Tomasz and I reworked this patch set to address your comments, mainly about the self-probe infrastructure and the way to init GIC redistributor in GICC structures. For the self-probe infrastructure, we introduce a new file in drivers/acpi/ which can be reused for ioapic in the future; For init GIC redistributor in GICC structures, I introduced a flag in struct redist_region just as you suggested, and get the redist base from GICC strucutes if no redistributor regions are available from GICR strucutes. I think the naming of the flag and functions are not good, please comment on them :) For the proper namespace of domain token for ACPI, I think we can use the Interrupt Controller Structure Types as the token, (just some ideas, not implemented in the patch, trying to discuss with you that if it makes sense to you), for Structure Types, we got: 1 - I/O APIC 0xB - GICC CPU Interface Structure 0xC - GICD GIC Distributor Structure 0xD - GICv2m MSI Frame 0xE - GICR Redistributor Structure 0xF - ITS Structure so except the GICD 0xC both for GICv2/3, others can used as proper namespace for different domain tokens, what do you think? Please comments on if we are on right direction, thanks. Hanjun Hanjun Guo (4): irqchip / GIC / ACPI: Use IRQCHIP_ACPI_DECLARE to simplify GICv2 init code irqchip / GICv3: remove the useless comparision of device node in xlate irqchip / GICv3: Add ACPI support for GICv3+ initialization irqchip / GICv3 / ACPI: Add GICR support via GICC structures Tomasz Nowicki (2): acpi, irqchip: Add self-probe infrastructure to initialize IRQ controller irqchip / GICv3: Refactor gic_of_init() for GICv3 driver arch/arm64/include/asm/irq.h | 13 -- arch/arm64/kernel/acpi.c | 25 --- drivers/acpi/Makefile | 2 + drivers/acpi/irq.c | 136 +++++++++++++ drivers/irqchip/irq-gic-v3.c | 360 ++++++++++++++++++++++++++++++----- drivers/irqchip/irq-gic.c | 4 +- include/asm-generic/vmlinux.lds.h | 13 ++ include/linux/acpi.h | 18 ++ include/linux/acpi_irq.h | 4 +- include/linux/irqchip.h | 13 ++ include/linux/irqchip/arm-gic-acpi.h | 9 +- include/linux/mod_devicetable.h | 9 + 12 files changed, 512 insertions(+), 94 deletions(-) create mode 100644 drivers/acpi/irq.c -- 1.9.1

11 years, 1 month

4
14
0 0

[PATCH v8 0/9] CPUFreq driver using CPPC methods

by Ashwin Chaugule

CPPC: ==== CPPC (Collaborative Processor Performance Control) is a new way to control CPU performance using an abstract continous scale as against a discretized P-state scale which is tied to CPU frequency only. It is defined in the ACPI 5.0+ spec. In brief, the basic operation involves: - OS makes a CPU performance request. (Can provide min and max tolerable bounds) - Platform (such as BMC) is free to optimize request within requested bounds depending on power/thermal budgets etc. - Platform conveys its decision back to OS The communication between OS and platform occurs through another medium called (PCC) Platform communication Channel. This is a generic mailbox like mechanism which includes doorbell semantics to indicate register updates. See drivers/mailbox/pcc.c This patchset introduces a CPPC based CPUFreq driver that works with existing governors such as ondemand. The CPPC table parsing and the CPPC communication semantics are abstracted into separate files to allow future CPPC based drivers to implement their own governors if required. Initial patchsets included an adaptation of the PID governor from intel_pstate.c. However recent experiments led to extensive modifications of the algorithm to calculate CPU busyness. Until it is verified that these changes are worthwhile, the existing governors should provide for a good enough starting point for ARM64 servers. Finer details about the PCC and CPPC spec are available in the latest ACPI 5.1 specification.[2] Testing: ======= This was tested on an SBSA compatible ARMv8 server with CPPCv2 firmware running on a remote processor. I verified that each CPUs performance limits were detected and that new performance requests were made by the on-demand governor proportional to the load on each CPU. I also verified that using the acpi_processor driver correctly maps the physical CPU ids to logical CPU ids, which helps in picking up the proper _CPC details from a processor object, in the case where CPU physical ids may not be contiguous. Changes since V7: - Simplied new kconfig options for PSS and idle. - Separated patch to enable acpi processor on ARM64. - Removed redundant kconfig cross deps on PCC. - Decoupled processor_perflib from new PSS kconfig option. Changes since V6: - Separated PSS and CST from ACPI processor driver in two patches. - Made new Kconfig symbols auto selectable from Arch Kconfigs. Changes since V5: - Checkpatch cleanups. - Change pss_init to pss_perf_init. Rec by Srinivas Pandruvada. - Explicit comment explaining why postcore_initcall to pcc mailbox. - Fold acpi_processor_syscore_init/exit into CONFIG_ACPI_CST. - Added patch with dummy functions used by ACPI_HOTPLUG_CPU. Changes since V4: - Misc cleanups. Addressed feedback from Rafael. - Made acpi_processor.c independent of C-states, P-states and others. - Per CPU scanning for _CPC is now made from acpi_processor.c - Added new Kconfig options for legacy C states and P states to enable future support for newer alternatives as defined in the ACPI spec 6.0. Changes since V3: - Split CPPC backend methods into separate files. - Add frontend driver which plugs into existing CPUfreq governors. - Simplify PCC driver by moving communication space mapping and read/write into client drivers. Changes since V2: - Select driver if !X86, since intel_pstate will use HWP extensions instead. - Added more comments. - Added Freq domain awareness and PSD parsing. Changes since V1: - Create a new driver based on Dirks suggestion. - Fold in CPPC backend hooks into main driver. Changes since V0: [1] - Split intel_pstate.c into a generic PID governor and platform specific backend. - Add CPPC accessors as PID backend. [1] - http://lwn.net/Articles/608715/ [2] - http://www.uefi.org/sites/default/files/resources/ACPI_5_1release.pdf [3] - https://patches.linaro.org/40705/ Ashwin Chaugule (9): PCC: Initialize PCC Mailbox earlier at boot ACPI: Split out ACPI PSS from ACPI Processor driver ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Introduce CPU performance controls using CPPC CPPC: Add a CPUFreq driver for use with CPPC ACPI: Add weak routines for ACPI CPU Hotplug CPPC: Probe for CPPC tables for each ACPI Processor object PCC: Disable compilation by default ACPI: Allow selection of the ACPI processor driver for ARM64 drivers/acpi/Kconfig | 35 +- drivers/acpi/Makefile | 7 +- drivers/acpi/acpi_processor.c | 18 + drivers/acpi/cppc_acpi.c | 812 ++++++++++++++++++++++++++++++++++++++++ drivers/acpi/processor_driver.c | 90 +++-- drivers/cpufreq/Kconfig.arm | 17 + drivers/cpufreq/Makefile | 2 + drivers/cpufreq/cppc_cpufreq.c | 197 ++++++++++ drivers/mailbox/Kconfig | 1 + drivers/mailbox/pcc.c | 8 +- include/acpi/cppc_acpi.h | 137 +++++++ include/acpi/processor.h | 63 +++- 12 files changed, 1345 insertions(+), 42 deletions(-) create mode 100644 drivers/acpi/cppc_acpi.c create mode 100644 drivers/cpufreq/cppc_cpufreq.c create mode 100644 include/acpi/cppc_acpi.h -- 1.9.1

11 years, 2 months

2
15
0 0

Mustang branch boot issue

by Itaru Kitayama

Hi Al, >Where does it "stall"? What's the last message you see? And if you're not >using earlycon, please do so; that will help determine how far the boot is >getting. If I boot it with acpi=force, no output. Does my usage below look correct? GRUB_CMDLINE_LINUX="earlycon=uart8250,mmio32,0x1c021000 acpi=force console=ttyS0,115200 loglevel=7" >How were those checked? In setup_arch() I was calling disable_acpi() right after the acpi_boot_table_init() call as that makes the system get to the prompt. I am about to build the kernel with your .config and test it on one of Mustangs in the Linaro Austin lab. The Boot firmware version is 1.1.0-rh-0.15. Itaru

11 years, 2 months

3
7
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Linaro-acpi