linaro-kernel February 2014

linaro-kernel@lists.linaro.org

90 participants
216 discussions

next boot: 2 pass, 37 fail (next-20140220)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140220 Failed boot tests (console logs at the end) =========================================== omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig am335x-boneblack: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig tegra30-beaver: FAIL: tegra_defconfig imx6dl-wandboard,wand-dual: FAIL: imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig imx6q-wandboard: FAIL: imx_v6_v7_defconfig qcom-apq8074-dragonboard: FAIL: msm_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig exynos5250-arndale: FAIL: exynos_defconfig ste-snowball: FAIL: multi_v7_defconfig tegra30-beaver: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig bcm28155-ap: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig imx6q-wandboard: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi FAIL: 0 min 28.7 sec omap3-beagle-xm FAIL: 0 min 56.7 sec omap4-panda FAIL: 0 min 59.1 sec omap3-overo-tobi FAIL: 0 min 27.8 sec am335x-bone FAIL: 0 min 30.0 sec am335x-boneblack FAIL: 0 min 28.0 sec omap5-uevm FAIL: 0 min 31.4 sec omap4-panda-es FAIL: 0 min 59.7 sec multi_lpae_defconfig -------------------- omap5-uevm FAIL: 0 min 57.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 19.5 sec tegra_defconfig --------------- tegra30-beaver FAIL: 1 min 41.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual FAIL: 0 min 22.8 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.5 sec imx6q-wandboard FAIL: 0 min 21.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard FAIL: 18 min 34.6 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.7 sec sun4i-a10-cubieboard FAIL: 0 min 23.3 sec exynos_defconfig ---------------- exynos5250-arndale FAIL: 0 min 34.3 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver FAIL: 0 min 24.8 sec am335x-boneblack FAIL: 0 min 28.6 sec omap3-beagle-xm FAIL: 0 min 53.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec armada-370-mirabox FAIL: 0 min 29.2 sec omap4-panda FAIL: 1 min 1.3 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 31.6 sec sun4i-a10-cubieboard FAIL: 0 min 19.4 sec bcm28155-ap FAIL: 16 min 34.1 sec omap3-overo-tobi FAIL: 0 min 27.7 sec imx6dl-wandboard,wand-solo FAIL: 0 min 22.2 sec am335x-bone FAIL: 0 min 30.3 sec omap3-overo-storm-tobi FAIL: 0 min 26.0 sec omap5-uevm FAIL: 0 min 31.4 sec imx6q-wandboard FAIL: 0 min 20.8 sec omap4-panda-es FAIL: 0 min 56.0 sec imx6dl-wandboard,wand-dual FAIL: 0 min 22.1 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 31.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.195 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730storm-qr51BV/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-qr51BV/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-qr51BV/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 2.4 MiB/s done Bytes transferred = 4299688 (419ba8 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-qr51BV/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 57128 (df28 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8fffff27 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.74 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-zZOZIP/zImage OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-zZOZIP/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-zZOZIP/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 469.7 KiB/s done Bytes transferred = 4299688 (419ba8 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org #tftp 0x81f00000 192.168.1.2:tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-zZOZIP/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 4.9 KiB/s done Bytes transferred = 57382 (e026 hex) OMAP3 beagleboard.org #printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62025 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.66 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to addsetenv serverip 192.168.1.2 ress 192.168.1.152 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4430panda-Zv0J_2/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-Zv0J_2/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-Zv0J_2/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 440.4 KiB/s done Bytes transferred = 4299688 (419ba8 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 76.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-Zv0J_2/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-Zv0J_2/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-Zv0J_2/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.14 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to addsetenv serverip 192.168.1.2 ress 192.168.1.155 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3530overo-ol9l1V/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3530overo-ol9l1V/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-ol9l1V/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 2.4 MiB/s done Bytes transferred = 4299688 (419ba8 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo #tftp 0x81f00000 192.168.1.2:tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-ol9l1V/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 56720 (dd90 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff52000, end 8ff62d8f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.77 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to addressetenv serverip 192.168.1.2 s 192.168.1.198 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xbone-UBbhpp/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-UBbhpp/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-UBbhpp/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 1.2 MiB/s done Bytes transferred = 4299688 (419ba8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-UBbhpp/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-UBbhpp/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-UBbhpp/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28596 (6fb4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f09fb3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.01 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound tosetenv serverip 192.168.1.2 address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xboneb-RmX0XG/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-RmX0XG/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-RmX0XG/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################# 1.2 MiB/s done Bytes transferred = 4299688 (419ba8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-RmX0XG/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 29192 (7208 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a207 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.02 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Connected. Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Connected. Disconnected. Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/121 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to addressetenv serverip 192.168.1.2 s 192.168.1.157 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4460panda-es-zKtpWn/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-zKtpWn/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-zKtpWn/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################# 469.7 KiB/s done Bytes transferred = 4299688 (419ba8 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-zKtpWn/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 4.9 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.70 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/121 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.201 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/omap5uevm-UN6Kav/zImage U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-UN6Kav/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-UN6Kav/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################# 444.3 KiB/s done Bytes transferred = 4529440 (451d20 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 92.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-UN6Kav/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-UN6Kav/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-UN6Kav/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x8008d80 T ### 7.8 KiB/s done Bytes transferred = 43833 (ab39 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x451d20 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8db38 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.96 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-cOW7Nm/zImage sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-cOW7Nm/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-cOW7Nm/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.9 MiB/s done Bytes transferred = 4529440 (451d20 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i#tftp 0x41000000 192.168.1.2:tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-cOW7Nm/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x451d20 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.51 seconds. # PYBOOT: Result: FAIL tegra_defconfig --------------- tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ DHCP client bound tosetenv serverip 192.168.1.2 address 192.168.1.224 Tegra30 (Beaver) # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Tegra30 (Beaver) # if test -n ${netargs}; then run netargs; fitftp 0x81000000 192.168.1.2:tmp/beaver-6lFF8U/zImage Tegra30 (Beaver) # tftp 0x81000000 192.168.1.2:tmp/beaver-6lFF8U/zImage Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-6lFF8U/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.2 MiB/s done Bytes transferred = 4234552 (409d38 hex) Tegra30 (Beaver) # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-6lFF8U/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-6lFF8U/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-6lFF8U/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 1.9 MiB/s done Bytes transferred = 23852 (5d2c hex) Tegra30 (Beaver) # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x409d38 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008d2b Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.0-rc3-next-20140220 (build@brutus) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Wed Feb 19 23:40:04 PST 2014 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0841580, node_mem_map ed7f0000 [ 0.000000] Normal zone: 1520 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 101.92 seconds. # PYBOOT: Result: FAIL imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.156 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-dual-YinV9B/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-dual-YinV9B/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-YinV9B/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 1.5 MiB/s done Bytes transferred = 5186360 (4f2338 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) =>tftp 0x11000000 192.168.1.2:tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-YinV9B/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.77 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi =>if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound tosetenv serverip 192.168.1.2 address 192.168.1.164 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-solo-tFl8IG/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-solo-tFl8IG/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-tFl8IG/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 1.5 MiB/s done Bytes transferred = 5186360 (4f2338 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-tFl8IG/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.54 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.163 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-quad-vFBpFR/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-quad-vFBpFR/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-vFBpFR/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 2.7 MiB/s done Bytes transferred = 5186360 (4f2338 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-vFBpFR/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 2.2 MiB/s done Bytes transferred = 25787 (64bb hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none =>bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x4f2338 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 110094ba Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.12 seconds. # PYBOOT: Result: FAIL msm_defconfig ------------- qcom-apq8074-dragonboard: FAIL: last 80 lines of boot log: ---------------------------------------------------------- Reboot: dragon ; ip9258 2 3 : ['off'] < waiting for device > error: device not found Reboot: dragon-usb ; phidget 3 4 : off, sleep, on Reboot: dragon ; ip9258 2 3 : off, sleep, on < waiting for device > rebooting... finished. total time: 0.005s downloading 'boot.img'... OKAY [ 0.335s] booting... OKAY [ 0.010s] finished. total time: 0.346s <LAVA_DISPATCHER>2014-02-20 08:53:56 AM INFO: Attempting to connect to device using: /usr/bin/conmux-console vence/dragon Connected to dragon console [channel connected] (~$quit to exit) (user:khilman) is already connected <LAVA_DISPATCHER>2014-02-20 08:54:06 AM INFO: Matched <class 'pexpect.TIMEOUT'> which means all-good <LAVA_DISPATCHER>2014-02-20 08:56:36 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:57:06 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:57:36 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:58:07 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:58:37 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:59:07 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:59:37 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0xa07becc> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/dragon'] searcher: searcher_re: 0: re.compile("/ #") buffer (last 100 chars): nected to dragon console [channel connected] (~$quit to exit) (user:khilman) is already connected before (last 100 chars): nected to dragon console [channel connected] (~$quit to exit) (user:khilman) is already connected after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 27847 child_fd: 5 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0x97d65ec> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-02-20 08:59:37 AM CRITICAL: Could not get the test image booted properly <LAVA_DISPATCHER>2014-02-20 08:59:37 AM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 530, in boot_linaro_image raise CriticalError(msg) CriticalError: Could not get the test image booted properly <LAVA_DISPATCHER>2014-02-20 08:59:37 AM INFO: CriticalError <LAVA_DISPATCHER>2014-02-20 08:59:37 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: dragon-usb ; phidget 3 4 : ['off'] Reboot: dragon ; ip9258 2 3 : ['off'] <LAVA_DISPATCHER>2014-02-20 08:59:38 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-02-20 08:59:38 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/b02901674c9e240e54471c5bb693804c… LBOOT: Result: FAIL LBOOT: Time: 1114.64 seconds. sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.153 sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-s8CziE/zImage sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-s8CziE/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-s8CziE/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1777528 (1b1f78 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-s8CziE/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b1f78 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.68 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i#setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to adsetenv serverip 192.168.1.2 dress 192.168.1.160 sun4i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun4i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie-LyzMe2/zImage sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-LyzMe2/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-LyzMe2/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################### 2.7 MiB/s done Bytes transferred = 1777528 (1b1f78 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i#tftp 0x41000000 192.168.1.2:tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-LyzMe2/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10881 (2a81 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b1f78 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa80 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 23.33 seconds. # PYBOOT: Result: FAIL exynos_defconfig ---------------- exynos5250-arndale: FAIL: last 80 lines of boot log: ---------------------------------------------------- MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1, EXYNOS DWMMC: 2 In: serial Out: serial Err: serial Net: No ethernet found. (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Hit any key to stop autoboot: 3 0 ARNDALE5250 # ARNDALE5250 # version version U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250 arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 ARNDALE5250 #setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ARNDALE5250 # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' ARNDALE5250 # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi ARNDALE5250 # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found ARNDALE5250 # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no ARNDALE5250 # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.167 ARNDALE5250 # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi ARNDALE5250 # if test -n ${netargs}; then run netargs; fitftp 0x40800000 192.168.1.2:tmp/arndale-HugbGD/zImage ARNDALE5250 # tftp 0x40800000 192.168.1.2:tmp/arndale-HugbGD/zImage Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-HugbGD/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ########################################################### done Bytes transferred = 2772672 (2a4ec0 hex) ARNDALE5250 #tftp 0x407c0000 192.168.1.2:tmp/arndale-HugbGD/exynos5250-arndale.dtb tftp 0x407c0000 192.168.1.2:tmp/arndale-HugbGD/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-HugbGD/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 33611 (834b hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cb34a Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 34.27 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to addresetenv serverip 192.168.1.2 ss 192.168.1.159 U8500 $ setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U8500 $ if test -n ${netargs}; then run netargs; fitftp 0x00800000 192.168.1.2:tmp/snowball-WOjCYK/tmp5NcJTg-uImage U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-WOjCYK/tmp5NcJTg-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-WOjCYK/tmp5NcJTg-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## done Bytes transferred = 4540689 (454911 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4540625 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.41 seconds. # PYBOOT: Result: FAIL tegra30-beaver: FAIL: last 80 lines of boot log: ------------------------------------------------ setenv fdt_high 0xffffffff Tegra30 (Beaver) # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Tegra30 (Beaver) # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Tegra30 (Beaver) # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 DHCP client bound to addrsetenv serverip 192.168.1.2 ess 192.168.1.224 Tegra30 (Beaver) # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Tegra30 (Beaver) # if test -n ${netargs}; then run netargs; fitftp 0x81000000 192.168.1.2:tmp/beaver-8EwX5w/zImage Tegra30 (Beaver) # tftp 0x81000000 192.168.1.2:tmp/beaver-8EwX5w/zImage Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-8EwX5w/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.2 MiB/s done Bytes transferred = 4505112 (44be18 hex) Tegra30 (Beaver) # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *############################################ 2.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) Tegra30 (Beaver) # tftp 0x83000000 192.168.1.2:tmp/beaver-8EwX5w/tegra30-beaver.dtb tftp 0x83000000 192.168.1.2:tmp/beaver-8EwX5w/tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.224 Filename 'tmp/beaver-8EwX5w/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *## 2.1 MiB/s done Bytes transferred = 23852 (5d2c hex) Tegra30 (Beaver) #printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 debug earlyprintk Tegra30 (Beaver) # bootz 0x81000000 0x82000000 0x83000000 bootz 0x81000000 0x82000000 0x83000000 Kernel image @ 0x81000000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83008d2b Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.76 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xboneb-WzmE0f/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-WzmE0f/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-WzmE0f/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.2 MiB/s done Bytes transferred = 4505112 (44be18 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot#tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-WzmE0f/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 29192 (7208 hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a207 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.58 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org #dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730xm-5z1TtN/zImage OMAP3 beagleboard.org # tftp ${loadaddr} 192.168.1.2:tmp/3730xm-5z1TtN/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-5z1TtN/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 487.3 KiB/s done Bytes transferred = 4505112 (44be18 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-5z1TtN/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 6.8 KiB/s done Bytes transferred = 57382 (e026 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62025 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 52.97 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.153 sun7i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun7i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie2-B5trRd/zImage sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-B5trRd/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-B5trRd/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.7 MiB/s done Bytes transferred = 4505112 (44be18 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-B5trRd/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *# 1.9 MiB/s done Bytes transferred = 12228 (2fc4 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40ffefc3 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.08 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound setenv serverip 192.168.1.2 to address 192.168.1.183 Marvell>> setif test -n ${netargs}; then run netargs; fi env serverip if test -n ${netargs}; then run netargs; fi syntax error Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-VpFOTW/tmpQ57egv-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-VpFOTW/tmpQ57egv-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-VpFOTW/tmpQ57egv-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ done Bytes transferred = 4515934 (44e85e hex) Marvell>>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>>printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>bootm 0x02000000 0x03000000 > bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-20 8:07:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4515870 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.22 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound tsetenv serverip 192.168.1.2 o address 192.168.1.152 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4430panda-ZmzsNz/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-ZmzsNz/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-ZmzsNz/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 493.2 KiB/s done Bytes transferred = 4505112 (44be18 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 62.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-ZmzsNz/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-ZmzsNz/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-ZmzsNz/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 8.8 KiB/s done Bytes transferred = 50077 (c39d hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f39c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 61.29 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Hit any key to stop autoboot: 1 0 openblocks> openblocks> version version U-Boot 2011.12 (Aug 26 2013 - 13:08:34) Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17) arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease) GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801 openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk openblocks> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi openblocks> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi openblocks> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no openblocks> dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.158 openblocks> setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi openblocks> if test -n ${netargs}; then run netargs; fitftp 0x02000000 192.168.1.2:tmp/obsax3-Qu7_6C/tmprBSqi5-uImage openblocks> tftp 0x02000000 192.168.1.2:tmp/obsax3-Qu7_6C/tmprBSqi5-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'tmp/obsax3-Qu7_6C/tmprBSqi5-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ done Bytes transferred = 4520196 (44f904 hex) openblocks>tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) openblocks> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks>bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-20 8:10:26 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4520132 Bytes = 4.3 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.61 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.160 sun4i# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi sun4i# if test -n ${netargs}; then run netargs; fitftp 0x40008000 192.168.1.2:tmp/cubie-mIbGz5/zImage sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-mIbGz5/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-mIbGz5/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.7 MiB/s done Bytes transferred = 4505112 (44be18 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.160 Filename 'tmp/cubie-mIbGz5/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.1 MiB/s done Bytes transferred = 10881 (2a81 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.160:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ffa000, end 40fffa80 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.39 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 80 lines of boot log: --------------------------------------------- <LAVA_DISPATCHER>2014-02-20 08:19:24 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:19:55 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:20:25 AM WARNING: Sending newline in case of corruption. <LAVA_DISPATCHER>2014-02-20 08:20:55 AM INFO: Boot linaro image failed: Timeout exceeded in read_nonblocking(). <lava_dispatcher.utils.logging_spawn object at 0x982202c> version: 2.4 ($Revision: 516 $) command: /usr/bin/conmux-console args: [u'/usr/bin/conmux-console', u'vence/capri'] searcher: searcher_re: 0: re.compile("root@bcm-capri-board:~#") buffer (last 100 chars): 0x9e000000 Using Device Tree in place at 9e000000, end 9e004657 Starting kernel ... before (last 100 chars): 0x9e000000 Using Device Tree in place at 9e000000, end 9e004657 Starting kernel ... after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 31708 child_fd: 3 closed: False timeout: 1200 delimiter: <class 'pexpect.EOF'> logfile: None logfile_read: <lava_dispatcher.context.Flusher object at 0x914f60c> logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 <LAVA_DISPATCHER>2014-02-20 08:20:55 AM INFO: Booting the test image. Attempt: 2 < waiting for device > <LAVA_DISPATCHER>2014-02-20 08:20:57 AM INFO: Perform hard reset on the system Reboot: capri ; ip9258 1 3 : off, sleep, on < waiting for device > <LAVA_DISPATCHER>2014-02-20 08:30:59 AM ERROR: boot_linaro_image failed Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 105, in run client.boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 508, in boot_linaro_image self._boot_linaro_image() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/client/base.py", line 481, in _boot_linaro_image self.proc = self.target_device.power_on() File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/capri.py", line 114, in power_on self.fastboot('reboot') File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 57, in __call__ _call(self.context, command, ignore_failure, timeout) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/device/fastboot.py", line 45, in _call context.run_command(cmd, failok=ignore_failure) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/context.py", line 153, in run_command rc = subprocess.check_call(command, **output_args) File "/usr/lib/python2.7/subprocess.py", line 511, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '['nice', 'sh', '-c', u'timeout 600s flock /var/lock/lava-fastboot.lck fastboot -s 1234567890 reboot']' returned non-zero exit status 124 <LAVA_DISPATCHER>2014-02-20 08:30:59 AM INFO: CriticalError <LAVA_DISPATCHER>2014-02-20 08:30:59 AM WARNING: [ACTION-E] boot_linaro_image is finished with error (Failed to boot test image.). ErrorMessage: Failed to boot test image. Lava failed at action boot_linaro_image with error:Failed to boot test image. Traceback (most recent call last): File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/job.py", line 270, in run action.run(**params) File "/home/khilman/work.local/lava/lava-dispatcher/lava_dispatcher/actions/boot_control.py", line 109, in run raise CriticalError("Failed to boot test image.") CriticalError: Failed to boot test image. Reboot: capri ; ip9258 1 3 : ['off'] <LAVA_DISPATCHER>2014-02-20 08:31:00 AM INFO: Submitting the test result with parameters = {u'token': '<HIDDEN>', u'stream': u'/anonymous/lboot/', u'server': u'http://khilman@lava.lan/RPC2/'} <LAVA_DISPATCHER>2014-02-20 08:31:00 AM INFO: Dashboard : http://lava.lan/dashboard/permalink/bundle/04a66209783262ea115348ba280d8e03… LBOOT: Result: FAIL LBOOT: Time: 994.08 seconds. omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to setenv serverip 192.168.1.2 address 192.168.1.155 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3530overo-rTxcee/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3530overo-rTxcee/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-rTxcee/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.5 MiB/s done Bytes transferred = 4505112 (44be18 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-rTxcee/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-rTxcee/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-rTxcee/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.4 MiB/s done Bytes transferred = 56720 (dd90 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} 0x81000000 0x81f00000 bootz ${loadaddr} 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff52000, end 8ff62d8f ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.74 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.164 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-solo-sIb1cw/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-solo-sIb1cw/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-sIb1cw/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.5 MiB/s done Bytes transferred = 4505112 (44be18 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.5 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.164 Filename 'tmp/wand-solo-sIb1cw/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.4 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.164:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.20 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U-Boot# if test -n ${netargs}; then run netargs; fitftp 0x80200000 192.168.1.2:tmp/am335xbone-MhDQtQ/zImage U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-MhDQtQ/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-MhDQtQ/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.1 MiB/s done Bytes transferred = 4505112 (44be18 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-MhDQtQ/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-MhDQtQ/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-MhDQtQ/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1 MiB/s done Bytes transferred = 28596 (6fb4 hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f09fb3 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.30 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo #if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo #dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.195 Overo # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Overo # if test -n ${netargs}; then run netargs; fitftp ${loadaddr} 192.168.1.2:tmp/3730storm-rFlhnK/zImage Overo # tftp ${loadaddr} 192.168.1.2:tmp/3730storm-rFlhnK/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-rFlhnK/zImage'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.4 MiB/s done Bytes transferred = 4505112 (44be18 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-rFlhnK/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 57128 (df28 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz ${loadaddr} - 0x81f00000 bootz ${loadaddr} - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffef000, end 8fffff27 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.03 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Reboot: omap5uevm ; phidget 1 2 : off, sleep, on found: 002/076 2 ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 80 lines of boot log: ------------------------------------------------- U-Boot 2013.07-00001-gc362749 (Sep 06 2013 - 07:50:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 => setenv bootargs console=ttymxc0,115200 setenv bootargs console=ttymxc0,115200 => setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi => setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no => dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to adsetenv serverip 192.168.1.2 dress 192.168.1.163 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-quad-AyV1wQ/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-quad-AyV1wQ/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-AyV1wQ/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 2.9 MiB/s done Bytes transferred = 4505112 (44be18 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 2.8 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.163 Filename 'tmp/wand-quad-AyV1wQ/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 2.5 MiB/s done Bytes transferred = 25787 (64bb hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 ip=192.168.1.163:192.168.1.2::255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x44be18 ] ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 110094ba Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.78 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ Panda # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to adsetenv serverip 192.168.1.2 dress 192.168.1.157 Panda # setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi Panda # if test -n ${netargs}; then run netargs; fitftp 0x82000000 192.168.1.2:tmp/4460panda-es-WCoLqX/zImage Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-WCoLqX/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-WCoLqX/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ############################################### 488.3 KiB/s done Bytes transferred = 4505112 (44be18 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-WCoLqX/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 9.8 KiB/s done Bytes transferred = 50489 (c539 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f538 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.02 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 80 lines of boot log: ------------------------------------------------------------ => version version U-Boot 2013.04-00012-g0b44183 (May 15 2013 - 16:00:22) arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 => setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 =>setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' => if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi => if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi =>setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no =>dhcp dhcp FEC Waiting for PHY auto negotiation to complete.. done BOOTP broadcast 1 DHCP client bound to asetenv serverip 192.168.1.2 ddress 192.168.1.156 => setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi => if test -n ${netargs}; then run netargs; fitftp 0x10800000 192.168.1.2:tmp/wand-dual-0zJAa6/zImage => tftp 0x10800000 192.168.1.2:tmp/wand-dual-0zJAa6/zImage Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-0zJAa6/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################### 1.5 MiB/s done Bytes transferred = 4505112 (44be18 hex) => tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x11100000 192.168.1.2:buildroot.cpio.gz.uboot Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x11100000 Loading: *############################################ 1.6 MiB/s done Bytes transferred = 642602 (9ce2a hex) => tftp 0x11000000 192.168.1.2:tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb tftp 0x11000000 192.168.1.2:tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb Using FEC device TFTP from server 192.168.1.2; our IP address is 192.168.1.156 Filename 'tmp/wand-dual-0zJAa6/imx6dl-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.5 MiB/s done Bytes transferred = 24418 (5f62 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.156:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none => bootz 0x10800000 0x11100000 0x11000000 bootz 0x10800000 0x11100000 0x11000000 ## Loading init Ramdisk from Legacy Image at 11100000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11008f61 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.05 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to addsetenv serverip 192.168.1.2 ress 192.168.1.159 U8500 $ setenv serverip 192.168.1.2if test -n ${netargs}; then run netargs; fi U8500 $ if test -n ${netargs}; then run netargs; fitftp 0x00800000 192.168.1.2:tmp/snowball-HFdTnL/tmpqEazsF-uImage U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-HFdTnL/tmpqEazsF-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-HFdTnL/tmpqEazsF-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ###### done Bytes transferred = 2947457 (2cf981 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2947393 Bytes = 2.8 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

[PATCH 1/2] ASoC: alc5623: Convert to direct regmap API usage

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> Convert to directly use the regmap API, allowing us to eliminate the last user of the ASoC level I/O implementations (there are still open coded I/O implementations in drivers), avoiding duplicating code in regmap. We no longer cache the entire CODEC register map on probe since the more advanced cache infrastructure in regmap is able to fill the cache on demand. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- sound/soc/codecs/alc5623.c | 87 ++++++++++++++++++++++++++-------------------- 1 file changed, 49 insertions(+), 38 deletions(-) diff --git a/sound/soc/codecs/alc5623.c b/sound/soc/codecs/alc5623.c index d303628..36cf7e8 100644 --- a/sound/soc/codecs/alc5623.c +++ b/sound/soc/codecs/alc5623.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/i2c.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <sound/core.h> #include <sound/pcm.h> @@ -38,26 +39,13 @@ MODULE_PARM_DESC(caps_charge, "ALC5623 cap charge time (msecs)"); /* codec private data */ struct alc5623_priv { - enum snd_soc_control_type control_type; + struct regmap *regmap; u8 id; unsigned int sysclk; - u16 reg_cache[ALC5623_VENDOR_ID2+2]; unsigned int add_ctrl; unsigned int jack_det_ctrl; }; -static void alc5623_fill_cache(struct snd_soc_codec *codec) -{ - int i, step = codec->driver->reg_cache_step; - u16 *cache = codec->reg_cache; - - /* not really efficient ... */ - codec->cache_bypass = 1; - for (i = 0 ; i < codec->driver->reg_cache_size ; i += step) - cache[i] = snd_soc_read(codec, i); - codec->cache_bypass = 0; -} - static inline int alc5623_reset(struct snd_soc_codec *codec) { return snd_soc_write(codec, ALC5623_RESET, 0); @@ -869,18 +857,28 @@ static struct snd_soc_dai_driver alc5623_dai = { static int alc5623_suspend(struct snd_soc_codec *codec) { + struct alc5623_priv *alc5623 = snd_soc_codec_get_drvdata(codec); + alc5623_set_bias_level(codec, SND_SOC_BIAS_OFF); + regcache_cache_only(alc5623->regmap, true); + return 0; } static int alc5623_resume(struct snd_soc_codec *codec) { - int i, step = codec->driver->reg_cache_step; - u16 *cache = codec->reg_cache; + struct alc5623_priv *alc5623 = snd_soc_codec_get_drvdata(codec); + int ret; /* Sync reg_cache with the hardware */ - for (i = 2 ; i < codec->driver->reg_cache_size ; i += step) - snd_soc_write(codec, i, cache[i]); + regcache_cache_only(alc5623->regmap, false); + ret = regcache_sync(alc5623->regmap); + if (ret != 0) { + dev_err(codec->dev, "Failed to sync register cache: %d\n", + ret); + regcache_cache_only(alc5623->regmap, true); + return ret; + } alc5623_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -900,14 +898,14 @@ static int alc5623_probe(struct snd_soc_codec *codec) struct snd_soc_dapm_context *dapm = &codec->dapm; int ret; - ret = snd_soc_codec_set_cache_io(codec, 8, 16, alc5623->control_type); + codec->control_data = alc5623->regmap; + ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP); if (ret < 0) { dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); return ret; } alc5623_reset(codec); - alc5623_fill_cache(codec); /* power on device */ alc5623_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -980,9 +978,15 @@ static struct snd_soc_codec_driver soc_codec_device_alc5623 = { .suspend = alc5623_suspend, .resume = alc5623_resume, .set_bias_level = alc5623_set_bias_level, - .reg_cache_size = ALC5623_VENDOR_ID2+2, - .reg_word_size = sizeof(u16), - .reg_cache_step = 2, +}; + +static const struct regmap_config alc5623_regmap = { + .reg_bits = 8, + .val_bits = 16, + .reg_stride = 2, + + .max_register = ALC5623_VENDOR_ID2, + .cache_type = REGCACHE_RBTREE, }; /* @@ -996,19 +1000,32 @@ static int alc5623_i2c_probe(struct i2c_client *client, { struct alc5623_platform_data *pdata; struct alc5623_priv *alc5623; - int ret, vid1, vid2; + unsigned int vid1, vid2; + int ret; - vid1 = i2c_smbus_read_word_data(client, ALC5623_VENDOR_ID1); - if (vid1 < 0) { - dev_err(&client->dev, "failed to read I2C\n"); - return -EIO; + alc5623 = devm_kzalloc(&client->dev, sizeof(struct alc5623_priv), + GFP_KERNEL); + if (alc5623 == NULL) + return -ENOMEM; + + alc5623->regmap = devm_regmap_init_i2c(client, &alc5623_regmap); + if (IS_ERR(alc5623->regmap)) { + ret = PTR_ERR(alc5623->regmap); + dev_err(&client->dev, "Failed to initialise I/O: %d\n", ret); + return ret; + } + + ret = regmap_read(alc5623->regmap, ALC5623_VENDOR_ID1, &vid1); + if (ret < 0) { + dev_err(&client->dev, "failed to read vendor ID1: %d\n", ret); + return ret; } vid1 = ((vid1 & 0xff) << 8) | (vid1 >> 8); - vid2 = i2c_smbus_read_byte_data(client, ALC5623_VENDOR_ID2); - if (vid2 < 0) { - dev_err(&client->dev, "failed to read I2C\n"); - return -EIO; + ret = regmap_read(alc5623->regmap, ALC5623_VENDOR_ID2, &vid2); + if (ret < 0) { + dev_err(&client->dev, "failed to read vendor ID2: %d\n", ret); + return ret; } if ((vid1 != 0x10ec) || (vid2 != id->driver_data)) { @@ -1021,11 +1038,6 @@ static int alc5623_i2c_probe(struct i2c_client *client, dev_dbg(&client->dev, "Found codec id : alc56%02x\n", vid2); - alc5623 = devm_kzalloc(&client->dev, sizeof(struct alc5623_priv), - GFP_KERNEL); - if (alc5623 == NULL) - return -ENOMEM; - pdata = client->dev.platform_data; if (pdata) { alc5623->add_ctrl = pdata->add_ctrl; @@ -1048,7 +1060,6 @@ static int alc5623_i2c_probe(struct i2c_client *client, } i2c_set_clientdata(client, alc5623); - alc5623->control_type = SND_SOC_I2C; ret = snd_soc_register_codec(&client->dev, &soc_codec_device_alc5623, &alc5623_dai, 1); -- 1.9.0.rc3

11 years, 1 month

mainline boot: 36 pass, 1 fail (v3.14-rc3-184-ge95003c)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-184-ge95003c Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.7 sec omap3-beagle-xm PASS: 1 min 0.5 sec omap4-panda PASS: 1 min 10.2 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm PASS: 1 min 0.1 sec omap4-panda-es PASS: 1 min 13.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 45.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 58.9 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 17.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.5 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.1 sec tegra30-beaver PASS: 0 min 19.9 sec am335x-boneblack PASS: 0 min 23.3 sec omap3-beagle-xm PASS: 0 min 55.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 52.0 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.2 sec bcm28155-ap PASS: 1 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 47.0 sec imx6q-wandboard PASS: 0 min 17.8 sec omap4-panda-es PASS: 0 min 51.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00184-ge95003c #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee396310 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eeadaed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa44 ee910e10 c00ffab8 c04e2864 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee941f78 de40: 00000086 ee90b210 c0519110 00000000 c0519110 c04e2864 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551e48 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519110 ee90b244 00000000 c01c874c 00000000 c0519110 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519110 ee396380 c0518140 c01c7d74 c046c560 c052ee80 dec0: c0519110 c0519110 00000006 c052ee80 c052ee80 c01c8d90 00000000 c04f7484 dee0: 00000006 c04e2894 c04f7484 c00088bc 00000086 ef7fce08 c0454500 00000000 df00: 00000000 c04ad318 00000063 ee83df20 c0035c6c c0035c90 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e60 c04acd58 00000006 ef7fce26 00000006 df40: c0507bf0 c04f7484 00000006 c052ee80 c052ee80 c04ce50c 00000086 c04f0b3c df60: c04f0b30 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 4faffddf df80: fbff7bde 00000000 c03a0a28 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0a30 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd2f [<c02c9538>] (__clk_put) from [<c01ffa44>] (mv_platform_probe+0x2ac/0x414) [<c01ffa44>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e2894>] (mv_init+0x30/0x50) [<c04e2894>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0a30>] (kernel_init+0x8/0xf0) [<c03a0a30>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 04372d7b54ffe8b3 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00184-ge95003c #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5228>] (dump_stack+0x80/0x90) [<c03a5228>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000946 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ed36 00000001 c052ed36 ee876000 00000000 ee877fe8 c000ee0c c00557a4 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c00557a4>] (cpu_startup_entry+0xf4/0x134) [<c00557a4>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.16 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

queue boot: 11 pass, 1 fail (v3.10.30-26-g8f740e7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.30-26-g8f740e7 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-solo: FAIL: imx_v6_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-bone PASS: 0 min 26.7 sec omap4-panda-es PASS: 1 min 7.4 sec omap3-beagle-xm PASS: 0 min 56.6 sec omap3-tobi PASS: 0 min 33.8 sec omap4-panda PASS: 1 min 7.9 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.7 sec imx6dl-wandboard,wand-solo FAIL: 0 min 32.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox PASS: 0 min 19.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-solo: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Connected to wand-solo console [channel connected] (~$quit to exit) (user:khilman) is already connected (user:khilman) is already connected ~$hardreset Command(wand-solo console)> hardreset (user:khilman) Reboot wand-solo Reboot: wand-solo ; phidget 2 2 : off, sleep, on U-Boot 2013.04-00012-g0b44183-dirty (May 15 2013 - 16:16:11) CPU: Freescale i.MX6SOLO rev1.1 at 792 MHz Reset cause: POR Board: Wandboard DRAM: 512 MiB WARNING: Caches not enabled MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default env 0 => ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.96 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

queue boot: 32 pass, 1 fail (v3.12.11-32-gefc99f1)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.11-32-gefc99f1 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.1 sec omap3-beagle-xm PASS: 0 min 56.4 sec omap4-panda PASS: 1 min 2.9 sec omap3-tobi PASS: 0 min 22.0 sec am335x-bone PASS: 0 min 26.9 sec omap4-panda-es PASS: 1 min 6.4 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec imx6q-wandboard PASS: 0 min 16.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.8 sec tegra30-beaver PASS: 0 min 22.6 sec am335x-boneblack PASS: 0 min 32.1 sec omap3-beagle-xm PASS: 0 min 58.3 sec sun7i-a20-cubieboard2 PASS: 0 min 13.5 sec armada-370-mirabox PASS: 0 min 20.4 sec omap4-panda PASS: 1 min 5.3 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.7 sec sun4i-a10-cubieboard PASS: 0 min 13.6 sec bcm28155-ap PASS: 1 min 15.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.4 sec omap3-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 33.8 sec imx6q-wandboard PASS: 0 min 16.3 sec omap4-panda-es PASS: 1 min 1.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 36.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.8 sec armada-370-mirabox FAIL: 0 min 27.7 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>if test -n ${initenv}; then run initenv; fi > if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>>dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client boundsetenv serverip 192.168.1.2 to address 192.168.1.183 Marvell>>if test -n ${netargs}; then run netargs; fi setenv serverip if test -n ${netargs}; then run netargs; fi syntax error Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-PjojnE/tmpdHthf0-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-PjojnE/tmpdHthf0-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-PjojnE/tmpdHthf0-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653221 (287c25 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-19 9:20:49 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653157 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.68 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

arm-soc boot: 35 pass, 2 fail (v3.14-rc3-46-gfe73503)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc3-46-gfe73503 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-overo-storm-tobi PASS: 0 min 22.4 sec omap3-beagle-xm PASS: 1 min 2.3 sec omap4-panda PASS: 1 min 7.0 sec omap3-overo-tobi PASS: 0 min 23.6 sec am335x-bone PASS: 0 min 27.7 sec am335x-boneblack PASS: 0 min 25.9 sec omap4-panda-es PASS: 1 min 10.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.1 sec sun4i-a10-cubieboard PASS: 0 min 12.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 54.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.4 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.6 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 45.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 51.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 19.0 sec bcm28155-ap PASS: 0 min 58.9 sec omap3-overo-tobi PASS: 0 min 24.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es FAIL: 2 min 15.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.0 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= multi_v7_defconfig ------------------ omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ [ 0.459472] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104, base_baud = 3000000) is a OMAP UART0 [ 0.459777] omap_uart 4806c000.serial: no wakeirq for uart0 [ 0.459930] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105, base_baud = 3000000) is a OMAP UART1 [ 0.460235] omap_uart 48020000.serial: no wakeirq for uart0 [ 0.460388] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106, base_baud = 3000000) is a OMAP UART2 [ 1.323699] console [ttyO2] enabled [ 1.327667] omap_uart 4806e000.serial: no wakeirq for uart0 [ 1.333709] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.343994] STMicroelectronics ASC driver initialized [ 1.350311] serial: Freescale lpuart driver [ 1.354919] [drm] Initialized drm 1.1.0 20060810 [ 1.365814] loop: module loaded [ 1.375610] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.383453] usbcore: registered new interface driver pegasus [ 1.389465] usbcore: registered new interface driver asix [ 1.395202] usbcore: registered new interface driver ax88179_178a [ 1.401641] usbcore: registered new interface driver cdc_ether [ 1.407836] usbcore: registered new interface driver r815x [ 1.413665] usbcore: registered new interface driver CoreChips [ 1.419860] usbcore: registered new interface driver smsc75xx [ 1.425933] usbcore: registered new interface driver smsc95xx [ 1.432037] usbcore: registered new interface driver net1080 [ 1.438018] usbcore: registered new interface driver cdc_subset [ 1.444274] usbcore: registered new interface driver zaurus [ 1.450225] usbcore: registered new interface driver cdc_ncm [ 1.456176] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.463043] ehci-pci: EHCI PCI platform driver [ 1.467773] ehci-platform: EHCI generic platform driver [ 1.473480] ehci-omap: OMAP-EHCI Host Controller driver [ 1.499267] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.504974] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.513275] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.536651] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.543579] hub 1-0:1.0: USB hub found [ 1.547576] hub 1-0:1.0: 3 ports detected [ 1.552246] ehci-orion: EHCI orion driver [ 1.556701] SPEAr-ehci: EHCI SPEAr driver [ 1.561065] tegra-ehci: Tegra EHCI driver [ 1.565979] usbcore: registered new interface driver usb-storage [ 1.574249] mousedev: PS/2 mouse device common for all mice [ 1.582458] i2c /dev entries driver [ 1.588623] sdhci: Secure Digital Host Controller Interface driver [ 1.595123] sdhci: Copyright(c) Pierre Ossman [ 1.600494] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.606414] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.614074] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.619995] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.627929] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.635009] usbcore: registered new interface driver usbhid [ 1.640899] usbhid: USB HID core driver [ 1.648925] TCP: cubic registered [ 1.652404] NET: Registered protocol family 17 [ 1.657287] Key type dns_resolver registered [ 1.662261] Power Management for TI OMAP4+ devices. [ 1.667449] Power Management for TI OMAP4. [ 1.671752] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.678894] Registering SWP/SWPB emulation handler [ 1.684875] vwl1271: 1800 mV [ 1.692199] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.701446] twl 0-0048: PIH (irq 39) nested IRQs [ 1.707824] twl_rtc rtc.11: Enabling TWL-RTC [ 1.714630] twl_rtc rtc.11: rtc core: registered rtc.11 as rtc0 [ 1.721557] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.727600] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.733612] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.739624] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.745117] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.750488] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.755493] VDAC: 1800 mV [ 1.758850] VANA: 2100 mV [ 1.762664] VCXIO: 1800 mV [ 1.762664] VUSB: 3300 mV [ 1.769561] V1V8: 1800 mV [ 1.773101] V2V1: 2100 mV [ 1.780761] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 12.016784] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 135.70 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00046-gfe73503 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee39d290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa48 ee910e10 c00ffad0 c04e283c 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 ee251ca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e283c 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551dc8 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c874c 00000000 c0519090 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519090 ee39d300 c05180c0 c01c7d74 c046c570 c052ee00 dec0: c0519090 c0519090 00000006 c052ee00 c052ee00 c01c8d90 00000000 c04f7464 dee0: 00000006 c04e286c c04f7464 c00088bc 00000086 ef7fce08 c0454510 00000000 df00: 00000000 c04ad38c 00000063 ee83df20 c0035c2c c0035c50 00000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e20 c04acd7c 00000006 ef7fce26 00000006 df40: c0507b70 c04f7464 00000006 c052ee00 c052ee00 c04ce50c 00000086 c04f0b14 df60: c04f0b08 c04cec40 00000006 00000006 c04ce50c d456fc5d 0fbbed6f 47affddf df80: fbff7bce 00000000 c03a0980 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0988 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff1 dd7dfd3b [<c02c9538>] (__clk_put) from [<c01ffa48>] (mv_platform_probe+0x2ac/0x414) [<c01ffa48>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e286c>] (mv_init+0x30/0x50) [<c04e286c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0988>] (kernel_init+0x8/0xf0) [<c03a0988>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 051bf70501f8bc46 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00046-gfe73503 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5180>] (dump_stack+0x80/0x90) [<c03a5180>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000942 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ecb6 00000001 c052ecb6 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.38 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

next boot: 37 pass, 0 fail (next-20140219)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140219 Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 0 min 54.5 sec omap4-panda PASS: 1 min 4.8 sec omap3-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.4 sec omap5-uevm PASS: 1 min 3.8 sec omap4-panda-es PASS: 1 min 4.0 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 50.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.0 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 14.7 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.7 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.8 sec sun4i-a10-cubieboard PASS: 0 min 13.2 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 1 min 0.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.3 sec tegra30-beaver PASS: 0 min 22.8 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 43.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 56.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 14.1 sec bcm28155-ap PASS: 1 min 7.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec omap3-tobi PASS: 0 min 21.6 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 48.3 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 53.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.5 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec

11 years, 1 month

queue boot: 34 pass, 1 fail (v3.13.3-40-g0b219cc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.13.3-40-g0b219cc Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 0 min 54.7 sec omap4-panda PASS: 1 min 4.6 sec omap3-tobi PASS: 0 min 22.9 sec am335x-bone PASS: 0 min 27.6 sec omap4-panda-es PASS: 1 min 3.6 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.6 sec imx6q-wandboard PASS: 0 min 17.1 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 11.9 sec sun4i-a10-cubieboard PASS: 0 min 17.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.2 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack FAIL: 1 min 11.9 sec omap3-beagle-xm PASS: 0 min 55.6 sec sun7i-a20-cubieboard2 PASS: 0 min 13.8 sec armada-370-mirabox PASS: 0 min 20.5 sec omap4-panda PASS: 1 min 4.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.8 sec sun4i-a10-cubieboard PASS: 0 min 13.4 sec bcm28155-ap PASS: 1 min 15.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec omap3-tobi PASS: 0 min 20.8 sec am335x-bone PASS: 0 min 24.1 sec imx6q-wandboard PASS: 0 min 16.5 sec omap4-panda-es PASS: 1 min 4.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.2 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 27.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec Console logs for failures ========================= multi_v7_defconfig ------------------ am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ERROR: The remote end did not respond in time. at ether.c:2395/usb_eth_init() link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 ~$off # PYBOOT: Exception: Timeout exceeded in read_nonblocking(). <pexpect.spawn object at 0x2a12390> version: 2.3 ($Revision: 399 $) command: /usr/bin/conmux-console args: ['/usr/bin/conmux-console', 'vence/am335xboneb'] searcher: searcher_re: 0: re.compile("U-Boot#") buffer (last 100 chars): BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 before (last 100 chars): BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 23123 child_fd: 3 closed: False timeout: 30 delimiter: <class 'pexpect.EOF'> logfile: <open file 'boot-am335x-boneblack.log', mode 'w' at 0x7f61a6ef7c90> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 # PYBOOT: Time: 71.87 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

[PATCH v10 0/6] arm64: KGDB Support

by vijay.kilari＠gmail.com

From: Vijaya Kumar K <Vijaya.Kumar(a)caviumnetworks.com> KGDB debugging support is added for EL1 debug in AArch64 mode. In first patch, PSTATE.D is set correctly In second patch,register layout is updated to be inline with GDB tool. Basic GDB connection, break point set/clear and info commands are supported except step/next debugging With second patch, step/next debugging support is added, where in pc is updated to point to the instruction to be stepped and stopped. With third patch, the compile time breakpoint instruction reordering is fixed by making kgbd_breakpoint() as noinline Tested with ARM64 simulator v10: - Rebased on 3.14-rc3+ kernel and tested. boot tests passed v9: - minor code movement comments fix v8: - fixed comments on local_dbg_{save,restore} macros - instruction_pointer() macro to return unsigned long to fix compilation warnings v7: - Changes made to set PSTATE.D properly - Performed KGDB boot tests - Fixed compilation warnings in driver/misc/kgbdts.c Results: kgdb boot test [32927.237895] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [32927.266066] kgdb: Registered I/O driver kgdbts. [32927.266419] kgdb: Waiting for connection from remote gdb... [32927.268598] kgdbts:RUN plant and detach test [32927.270683] kgdbts:RUN sw breakpoint test [32927.287659] kgdbts:RUN bad memory access test [32927.290322] kgdbts:RUN singlestep test 1000 iterations [32927.330342] kgdbts:RUN singlestep [0/1000] [32931.286356] kgdbts:RUN singlestep [100/1000] [32935.242536] kgdbts:RUN singlestep [200/1000] [32939.205392] kgdbts:RUN singlestep [300/1000] [32943.169522] kgdbts:RUN singlestep [400/1000] [32947.231868] kgdbts:RUN singlestep [500/1000] [32951.188008] kgdbts:RUN singlestep [600/1000] [32955.332243] kgdbts:RUN singlestep [700/1000] [32959.467109] kgdbts:RUN singlestep [800/1000] [32963.430888] kgdbts:RUN singlestep [900/1000] [32967.346992] kgdbts:RUN do_fork for 100 breakpoints kgdb test from sysfs: ~ # echo V1F1000 > /sys/module/kgdbts/parameters/kgdbts [33231.554237] kgdb: Registered I/O driver kgdbts. [33231.554677] kgdbts:RUN plant and detach test [33231.557072] kgdbts:RUN sw breakpoint test [33231.576980] kgdbts:RUN bad memory access test [33231.580022] kgdbts:RUN singlestep test 1000 iterations [33231.627056] kgdbts:RUN singlestep [0/1000] [33235.954027] kgdbts:RUN singlestep [100/1000] [33240.429086] kgdbts:RUN singlestep [200/1000] [33244.687118] kgdbts:RUN singlestep [300/1000] [33248.945191] kgdbts:RUN singlestep [400/1000] [33253.203751] kgdbts:RUN singlestep [500/1000] [33257.462019] kgdbts:RUN singlestep [600/1000] [33261.817809] kgdbts:RUN singlestep [700/1000] [33266.081268] kgdbts:RUN singlestep [800/1000] [33270.339813] kgdbts:RUN singlestep [900/1000] [33274.712404] kgdbts:RUN do_fork for 1000 breakpoints ~ # v6: - Change pstate register to 8 bytes to make endian nuetral. Use GDB below GDB patch to display pstate in Big endian mode. https://sourceware.org/ml/gdb-patches/2013-12/msg00720.html Thanks to Andrew. v5: - Updated BRK #imm16 value to 0x400 & 0x401 as per recommendation as per Marcus recommendataion http://patchwork.ozlabs.org/patch/290801/ - Rebased to 3.13 AArch64 kernel v4: - Updated kgdb_single_step and kgdb_cpu_doing_single_step variables properly based on gdb state v3: - Rebased to v4 version of Sandeepa Prabhu's patch (patch 1) - Made dynamic break point instruction encoding generic - Made ESR value encoding generic for dynamic and compile break point - Used memcpy and memset to copy register contents to gdb buffer - Fixed reordering of break point instruction by compiler with patch 3 - Rebased against AAach64 upstream kernel v2: - Moved break instruction encoding to debug-monitors.h file - Fixed endianess of compile break instruction encoding - Updated I/O buffer sizes - Updated register buffer size - Remove changes to debug_exception handler in entry.S for - ELR update and step debugging with update pc instead of ELR - Rebased against AArch64 upstream kernel v1: - Initial patch-set arm64: Add macros to manage processor debug state arm64: KGDB: Add Basic KGDB support arm64: KGDB: Add step debugging support KGDB: make kgdb_breakpoint() as noinline misc: debug: remove compilation warnings arm64: KGDB: Add KGDB config arch/arm64/Kconfig | 1 + arch/arm64/include/asm/debug-monitors.h | 64 ++++-- arch/arm64/include/asm/irqflags.h | 23 +++ arch/arm64/include/asm/kgdb.h | 84 ++++++++ arch/arm64/include/asm/ptrace.h | 2 +- arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/debug-monitors.c | 1 + arch/arm64/kernel/kgdb.c | 336 +++++++++++++++++++++++++++++++ kernel/debug/debug_core.c | 2 +- 9 files changed, 495 insertions(+), 19 deletions(-) create mode 100644 arch/arm64/include/asm/kgdb.h create mode 100644 arch/arm64/kernel/kgdb.c -- 1.7.9.5

11 years, 1 month

mainline boot: 36 pass, 1 fail (v3.14-rc3-168-g960dfc4)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc3-168-g960dfc4 Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.8 sec omap3-beagle-xm PASS: 1 min 1.3 sec omap4-panda PASS: 1 min 17.4 sec am335x-bone PASS: 0 min 27.8 sec omap5-uevm PASS: 0 min 57.5 sec omap4-panda-es PASS: 1 min 10.1 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 43.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.2 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 59.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.1 sec sun4i-a10-cubieboard PASS: 0 min 17.0 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 28.8 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.4 sec tegra30-beaver PASS: 0 min 21.9 sec am335x-boneblack PASS: 0 min 23.5 sec omap3-beagle-xm PASS: 0 min 53.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec armada-370-mirabox PASS: 0 min 22.1 sec omap4-panda PASS: 0 min 55.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 17.2 sec bcm28155-ap PASS: 1 min 9.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 50.7 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 51.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.2 sec armada-370-mirabox PASS: 0 min 20.1 sec Console logs for failures ========================= mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy -38 Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc3-00168-g960dfc4 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9538>] lr : [<c02c6be4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee396310 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eeb2aed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ffa44 ee910e10 c00ffab8 c04e2864 0000001f de20: ee910e10 00000002 c03c3d40 00000000 74726f70 ee910030 00000001 eeb46f78 de40: 00000086 ee90b210 c0519110 00000000 c0519110 c04e2864 00000086 ee83c030 de60: 00000000 c01c9d44 c01c9d2c c0551e48 ee90b210 c01c84cc 00000007 ee90b210 de80: c0519110 ee90b244 00000000 c01c874c 00000000 c0519110 c01c86b4 c01c6bc4 dea0: ee85a7dc ee85e1b4 c0519110 ee396380 c0518140 c01c7d74 c046c560 c052ee80 dec0: c0519110 c0519110 00000006 c052ee80 c052ee80 c01c8d90 00000000 c04f7484 dee0: 00000006 c04e2894 c04f7484 c00088bc 00000086 ef7fce08 c0454500 00000000 df00: 00000000 c04ad378 00000063 ee83df20 c0035c6c c0169fb0 20000113 ffffffff df20: ef7fce1b c03bd7e0 00000086 c0035e60 c04acd58 00000006 ef7fce26 00000006 df40: c0507bf0 c04f7484 00000006 c052ee80 c052ee80 c04ce50c 00000086 c04f0b3c df60: c04f0b30 c04cec40 00000006 00000006 c04ce50c d456f45d 0fbbed6f 4faffddf df80: fbff7bce 00000000 c03a0a28 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a0a30 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff7 dd7dfd3f [<c02c9538>] (__clk_put) from [<c01ffa44>] (mv_platform_probe+0x2ac/0x414) [<c01ffa44>] (mv_platform_probe) from [<c01c9d44>] (platform_drv_probe+0x18/0x48) [<c01c9d44>] (platform_drv_probe) from [<c01c84cc>] (really_probe+0x80/0x214) [<c01c84cc>] (really_probe) from [<c01c874c>] (__driver_attach+0x98/0x9c) [<c01c874c>] (__driver_attach) from [<c01c6bc4>] (bus_for_each_dev+0x60/0x94) [<c01c6bc4>] (bus_for_each_dev) from [<c01c7d74>] (bus_add_driver+0x148/0x1f0) [<c01c7d74>] (bus_add_driver) from [<c01c8d90>] (driver_register+0x78/0xf8) [<c01c8d90>] (driver_register) from [<c04e2894>] (mv_init+0x30/0x50) [<c04e2894>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cec40>] (kernel_init_freeable+0x138/0x1d8) [<c04cec40>] (kernel_init_freeable) from [<c03a0a30>] (kernel_init+0x8/0xf0) [<c03a0a30>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 70afc952f166884a ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc3-00168-g960dfc4 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a5228>] (dump_stack+0x80/0x90) [<c03a5228>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000940 00000000 ee876000 c05024ac c03ac9cc ee876000 7fc0: c052ed36 00000001 c052ed36 ee876000 00000000 ee877fe8 c000ee0c c00557a4 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c00557a4>] (cpu_startup_entry+0xf4/0x134) [<c00557a4>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.18 seconds. # PYBOOT: Result: FAIL

11 years, 1 month

← Newer
1
...
7
8
9
10
11
12
13
...
22
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel February 2014