Hi,
This patch adds support for PCI to AArch64. It is based on my v3 patch
that adds support for creating generic host bridge structure from
device tree. With that in place, I was able to boot a platform that
has PCIe host bridge support and use a PCIe network card.
Changes from v2:
- Implement an arch specific version of pci_register_io_range() and
pci_address_to_pio().
- Return 1 from pci_proc_domain().
Changes from v1:
- Added Catalin's patch for moving the PCI_IO_BASE location and extend
its size to 16MB
- Integrated Arnd's version of pci_ioremap_io that uses a bitmap for
keeping track of assigned IO space and returns an io_offset. At the
moment the code is added in arch/arm64 but it can be moved in drivers/pci.
- Added a fix for the generic ioport_map() function when !CONFIG_GENERIC_IOMAP
as suggested by Arnd.
The API used is different from the one used by ARM architecture. There is
no pci_common_init_dev() function and no hw_pci structure, as that is no
longer needed. Once the last signature is added to the legal agreement, I
will post the host bridge driver code that I am using. Meanwhile, here
is an example of what the probe function looks like, posted as an example:
static int myhostbridge_probe(struct platform_device *pdev)
{
int err;
struct device_node *dev;
struct pci_host_bridge *bridge;
struct myhostbridge_port *pp;
resource_size_t lastbus;
dev = pdev->dev.of_node;
if (!of_device_is_available(dev)) {
pr_warn("%s: disabled\n", dev->full_name);
return -ENODEV;
}
pp = kzalloc(sizeof(struct myhostbridge_port), GFP_KERNEL);
if (!pp)
return -ENOMEM;
bridge = of_create_pci_host_bridge(&pdev->dev, &myhostbridge_ops, pp);
if (!bridge) {
err = -EINVAL;
goto bridge_init_fail;
}
err = myhostbridge_setup(bridge->bus);
if (err)
goto bridge_init_fail;
/* We always enable PCI domains and we keep domain 0 backward
* compatible in /proc for video cards
*/
pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC);
lastbus = pci_scan_child_bus(bridge->bus);
pci_bus_update_busn_res_end(bridge->bus, lastbus);
pci_assign_unassigned_bus_resources(bridge->bus);
pci_bus_add_devices(bridge->bus);
return 0;
bridge_init_fail:
kfree(pp);
return err;
}
Best regards,
Liviu
Catalin Marinas (1):
arm64: Extend the PCI I/O space to 16MB
Liviu Dudau (2):
Fix ioport_map() for !CONFIG_GENERIC_IOMAP cases.
arm64: Add architecture support for PCI
Documentation/arm64/memory.txt | 16 ++--
arch/arm64/Kconfig | 19 ++++-
arch/arm64/include/asm/Kbuild | 1 +
arch/arm64/include/asm/io.h | 5 +-
arch/arm64/include/asm/pci.h | 47 +++++++++++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/pci.c | 178 +++++++++++++++++++++++++++++++++++++++++
include/asm-generic/io.h | 2 +-
8 files changed, 259 insertions(+), 10 deletions(-)
create mode 100644 arch/arm64/include/asm/pci.h
create mode 100644 arch/arm64/kernel/pci.c
--
1.9.0
Hi Again,
I am now successful in isolating a CPU completely using CPUsets,
NO_HZ_FULL and CPU hotplug..
My setup and requirements for those who weren't following the
earlier mails:
For networking machines it is required to run data plane threads on
some CPUs (i.e. one thread per CPU) and these CPUs shouldn't be
interrupted by kernel at all.
Earlier I tried CPUSets with NO_HZ by creating two groups with
load_balancing disabled between them and manually tried to move
all tasks out to CPU0 group. But even then there were interruptions
which were continuously coming on CPU1 (which I am trying to
isolate). These were some workqueue events, some timers (like
prandom), timer overflow events (As NO_HZ_FULL pushes hrtimer
to long ahead in future, 450 seconds, rather than disabling them
completely, and these hardware timers were overflowing their
counters after 90 seconds on Samsung Exynos board).
So after creating CPUsets I hotunplugged CPU1 and added it back
immediately. This moved all these interruptions away and now
CPU1 is running my single thread ("stress") for ever.
Now my question is: Is there anything particularly wrong about using
hotplugging here ? Will that lead to a disaster :)
Thanks in Advance.
--
viresh
Patches adding support for hibernation on ARM
- ARM hibernation / suspend-to-disk
- Fix hang in freeze_processes during hibernation
- Change soft_restart to use non-tracing raw_local_irq_disable
Patches based on v3.13 tag, verified hibernation on beaglebone black on a branch
based on 3.13 merged with initial omap support from Russ Dill which be found here:
http://git.linaro.org/git-ro/people/sebastian.capella/linux.git hibernation_3.13_russMerge
(includes v1 patchset)
[PATCH v3 1/3] Fix hibernation restore hang in freeze_processes
drivers/base/firmware_class.c | 1 +
1 file changed, 1 insertion(+)
Add handling for PM_RESTORE_PREPARE notifier (unchanged from v1)
[PATCH v3 2/3] ARM: avoid tracers in soft_restart
arch/arm/kernel/process.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Use raw_local_irq_disable in place of local_irq_disable to avoid
infinite abort recursion while tracing.
[PATCH v3 3/3] ARM hibernation / suspend-to-disk
arch/arm/include/asm/memory.h | 1 +
arch/arm/kernel/Makefile | 1 +
arch/arm/kernel/hibernate.c | 106 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mm/Kconfig | 5 ++
include/linux/suspend.h | 2 +
5 files changed, 115 insertions(+)
Adds support for ARM based hibernation
Additional notes:
-----------------
There are two checkpatch warnings added by this patch. These follow
behavior in existing hibernation implementations on other platforms.
WARNING: externs should be avoided in .c files
#116: FILE: arch/arm/kernel/hibernate.c:26:
+extern const void __nosave_begin, __nosave_end;
This extern is picking up the linker nosave region definitions, only
used in hibernate. Follows same extern line used mips, powerpc, s390,
sh, sparc, x86 & unicore32
WARNING: externs should be avoided in .c files
#191: FILE: arch/arm/kernel/hibernate.c:101:
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
This extern is used in the arch/arm/ in hibernate, process and bL_switcher
Changes in v3:
--------------
* added comment to use of soft_restart
* drop irq disable soft_restart patch
* add patch to avoid tracers in soft_restart by using raw_local_irq_*
Changes in v2:
--------------
* Removed unneeded flush_thread, use of __naked and cpu_init.
* dropped Cyril Chemparathy <cyril(a)ti.com> from Cc: list as
emails are bouncing.
Thanks,
Sebastian Capella
This revision of the series places any otherwise unmapped CPUs into a
cluster in order to avoid confusing the scheduler if no topology
information is provided. This means that we should never bring up a CPU
with no topology information so while the warning is still present and
has been upgraded it should never triger unless there is a genuine bug
(as opposed to missing information).
Mark Brown (4):
arm64: topology: Implement basic CPU topology support
arm64: topology: Add support for topology DT bindings
arm64: topology: Tell the scheduler about the relative power of cores
arm64: topology: Provide relative power numbers for cores
arch/arm64/Kconfig | 24 +++
arch/arm64/include/asm/topology.h | 39 ++++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/smp.c | 11 ++
arch/arm64/kernel/topology.c | 388 ++++++++++++++++++++++++++++++++++++++
5 files changed, 463 insertions(+)
Patches adding support for hibernation on ARM
- ARM hibernation / suspend-to-disk
- Change soft_restart to use non-tracing raw_local_irq_disable
Patches based on v3.13 tag, verified hibernation on beaglebone black on a
branch based on 3.13 merged with initial omap support from Russ Dill which
can be found here (includes v1 patchset):
http://git.linaro.org/git-ro/people/sebastian.capella/linux.git hibernation_3.13_russMerge
[PATCH v4 1/2] ARM: avoid tracers in soft_restart
arch/arm/kernel/process.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Use raw_local_irq_disable in place of local_irq_disable to avoid
infinite abort recursion while tracing. (unchanged since v3)
[PATCH v4 2/2] ARM hibernation / suspend-to-disk
arch/arm/include/asm/memory.h | 1 +
arch/arm/kernel/Makefile | 1 +
arch/arm/kernel/hibernate.c | 113 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mm/Kconfig | 5 ++
include/linux/suspend.h | 2 +
5 files changed, 122 insertions(+)
Adds support for ARM based hibernation
Additional notes:
-----------------
There are two checkpatch warnings added by this patch. These follow
behavior in existing hibernation implementations on other platforms.
WARNING: externs should be avoided in .c files
#116: FILE: arch/arm/kernel/hibernate.c:26:
+extern const void __nosave_begin, __nosave_end;
This extern is picking up the linker nosave region definitions, only
used in hibernate. Follows same extern line used mips, powerpc, s390,
sh, sparc, x86 & unicore32
WARNING: externs should be avoided in .c files
#191: FILE: arch/arm/kernel/hibernate.c:101:
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
This extern is used in the arch/arm/ in hibernate, process and bL_switcher
Changes in v4:
--------------
* updated comment for soft_restart with review feedback
* dropped freeze_processes patch which was queued separately
to 3.14 by Rafael Wysocki:
https://lkml.org/lkml/2014/2/25/683
Changes in v3:
--------------
* added comment to use of soft_restart
* drop irq disable soft_restart patch
* add patch to avoid tracers in soft_restart by using raw_local_irq_*
Changes in v2:
--------------
* Removed unneeded flush_thread, use of __naked and cpu_init.
* dropped Cyril Chemparathy <cyril(a)ti.com> from Cc: list as
emails are bouncing.
Thanks,
Sebastian Capella
