linaro-kernel March 2014

linaro-kernel@lists.linaro.org

86 participants
221 discussions

[PATCH 00/34] CPUFreq: Move freq change notifications out of drivers

by Viresh Kumar

Another 452 lines gone :) Total stats upto now for all the 5 patchsets: Viresh Kumar (186): ... 69 files changed, 700 insertions(+), 2451 deletions(-) Net: 1751 lines gone.. -----x-------------x---------------- Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code and so this patch introduces another flag: CPUFREQ_NO_NOTIFICATION, which will be set by such drivers. This is Fifth part of my cleanup work for CPUFreq, first three are (And obviously its rebased over them): 1: cpufreq: Introduce cpufreq_table_validate_and_show() https://lkml.org/lkml/2013/8/8/263 2: cpufreq: define generic routines for cpufreq drivers https://lkml.org/lkml/2013/8/10/48 3. CPUFreq: Implement light weight ->target(): for 3.13 https://lkml.org/lkml/2013/8/13/349 4. CPUFreq: set policy->cur in cpufreq core instead of drivers https://lkml.org/lkml/2013/8/14/288 All these are pushed here: https://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/… -- viresh Cc: Andrew Lunn <andrew(a)lunn.ch> Cc: David S. Miller <davem(a)davemloft.net> Cc: Dmitry Eremin-Solenikov <dbaryshkov(a)gmail.com> Cc: Eric Miao <eric.y.miao(a)gmail.com> Cc: Hans-Christian Egtvedt <egtvedt(a)samfundet.no> Cc: Jesper Nilsson <jesper.nilsson(a)axis.com> Cc: John Crispin <blogic(a)openwrt.org> Cc: Kukjin Kim <kgene.kim(a)samsung.com> Cc: Linus Walleij <linus.walleij(a)linaro.org> Cc: linux-cris-kernel(a)axis.com Cc: Mikael Starvik <starvik(a)axis.com> Cc: Russell King <linux(a)arm.linux.org.uk> Cc: Santosh Shilimkar <santosh.shilimkar(a)ti.com> Cc: Sekhar Nori <nsekhar(a)ti.com> Cc: Shawn Guo <shawn.guo(a)linaro.org> Cc: sparclinux(a)vger.kernel.org Cc: spear-devel(a)list.st.com Cc: Stephen Warren <swarren(a)nvidia.com> Cc: Steven Miao <realmz6(a)gmail.com> Cc: Tony Luck <tony.luck(a)intel.com> Viresh Kumar (34): cpufreq: move freq change notifications to cpufreq core cpufreq: acpi: remove calls to cpufreq_notify_transition() cpufreq: arm_big_little: remove calls to cpufreq_notify_transition() cpufreq: at32ap: remove calls to cpufreq_notify_transition() cpufreq: blackfin: remove calls to cpufreq_notify_transition() cpufreq: cpu0: remove calls to cpufreq_notify_transition() cpufreq: cris: remove calls to cpufreq_notify_transition() cpufreq: davinci: remove calls to cpufreq_notify_transition() cpufreq: dbx500: remove calls to cpufreq_notify_transition() cpufreq: e_powersaver: remove calls to cpufreq_notify_transition() cpufreq: elanfreq: remove calls to cpufreq_notify_transition() cpufreq: exynos: remove calls to cpufreq_notify_transition() cpufreq: exynos5440: set CPUFREQ_NO_NOTIFICATION flag cpufreq: ia64-acpi: remove calls to cpufreq_notify_transition() cpufreq: imx6q: remove calls to cpufreq_notify_transition() cpufreq: kirkwood: remove calls to cpufreq_notify_transition() cpufreq: longhaul: set CPUFREQ_NO_NOTIFICATION flag cpufreq: loongson2: remove calls to cpufreq_notify_transition() cpufreq: maple: remove calls to cpufreq_notify_transition() cpufreq: omap: remove calls to cpufreq_notify_transition() cpufreq: p4-clockmod: remove calls to cpufreq_notify_transition() cpufreq: pasemi: remove calls to cpufreq_notify_transition() cpufreq: pmac: remove calls to cpufreq_notify_transition() cpufreq: powernow: remove calls to cpufreq_notify_transition() cpufreq: ppc: remove calls to cpufreq_notify_transition() cpufreq: pxa: remove calls to cpufreq_notify_transition() cpufreq: s3c: remove calls to cpufreq_notify_transition() cpufreq: s5pv210: remove calls to cpufreq_notify_transition() cpufreq: sa11x0: remove calls to cpufreq_notify_transition() cpufreq: sc520: remove calls to cpufreq_notify_transition() cpufreq: sparc: remove calls to cpufreq_notify_transition() cpufreq: SPEAr: remove calls to cpufreq_notify_transition() cpufreq: speedstep: remove calls to cpufreq_notify_transition() cpufreq: tegra: remove calls to cpufreq_notify_transition() drivers/cpufreq/acpi-cpufreq.c | 14 ++------- drivers/cpufreq/arm_big_little.c | 25 ++-------------- drivers/cpufreq/at32ap-cpufreq.c | 22 ++++++-------- drivers/cpufreq/blackfin-cpufreq.c | 22 +++++--------- drivers/cpufreq/cpufreq-cpu0.c | 33 ++++++++------------- drivers/cpufreq/cpufreq.c | 34 +++++++++++++++++++++ drivers/cpufreq/cris-artpec3-cpufreq.c | 8 ----- drivers/cpufreq/cris-etraxfs-cpufreq.c | 8 ----- drivers/cpufreq/davinci-cpufreq.c | 30 +++++++------------ drivers/cpufreq/dbx500-cpufreq.c | 22 +------------- drivers/cpufreq/e_powersaver.c | 23 ++------------- drivers/cpufreq/elanfreq.c | 13 -------- drivers/cpufreq/exynos-cpufreq.c | 28 +++++------------- drivers/cpufreq/exynos5440-cpufreq.c | 2 +- drivers/cpufreq/ia64-acpi-cpufreq.c | 19 ------------ drivers/cpufreq/imx6q-cpufreq.c | 39 ++++++++++-------------- drivers/cpufreq/kirkwood-cpufreq.c | 54 +++++++++++++--------------------- drivers/cpufreq/longhaul.c | 1 + drivers/cpufreq/loongson2_cpufreq.c | 16 ---------- drivers/cpufreq/maple-cpufreq.c | 18 +----------- drivers/cpufreq/omap-cpufreq.c | 39 +++++++++--------------- drivers/cpufreq/p4-clockmod.c | 10 ------- drivers/cpufreq/pasemi-cpufreq.c | 14 +-------- drivers/cpufreq/pmac32-cpufreq.c | 20 +++---------- drivers/cpufreq/pmac64-cpufreq.c | 18 +----------- drivers/cpufreq/powernow-k6.c | 8 ----- drivers/cpufreq/powernow-k7.c | 11 +------ drivers/cpufreq/powernow-k8.c | 15 +--------- drivers/cpufreq/ppc-corenet-cpufreq.c | 19 +----------- drivers/cpufreq/ppc_cbe_cpufreq.c | 19 +----------- drivers/cpufreq/pxa2xx-cpufreq.c | 27 ++++------------- drivers/cpufreq/pxa3xx-cpufreq.c | 12 -------- drivers/cpufreq/s3c2416-cpufreq.c | 21 +++---------- drivers/cpufreq/s3c64xx-cpufreq.c | 48 ++++++++++-------------------- drivers/cpufreq/s5pv210-cpufreq.c | 16 ++++------ drivers/cpufreq/sa1100-cpufreq.c | 17 ++++------- drivers/cpufreq/sa1110-cpufreq.c | 12 ++------ drivers/cpufreq/sc520_freq.c | 11 ------- drivers/cpufreq/sparc-us2e-cpufreq.c | 7 ----- drivers/cpufreq/sparc-us3-cpufreq.c | 7 ----- drivers/cpufreq/spear-cpufreq.c | 13 +------- drivers/cpufreq/speedstep-centrino.c | 20 +------------ drivers/cpufreq/speedstep-ich.c | 9 ------ drivers/cpufreq/speedstep-smi.c | 7 ----- drivers/cpufreq/tegra-cpufreq.c | 25 ++++------------ include/linux/cpufreq.h | 6 ++++ 46 files changed, 205 insertions(+), 657 deletions(-) -- 1.7.12.rc2.18.g61b472e

7 years, 3 months

[PATCH v7 0/6] Support for creating generic host_bridge from device tree

by Liviu Dudau

I'm dropping the RFC tag now as I have the feeling that we are starting to have something in a good shape that can be pushed for more testing in near future. This is v7 of my attempt to add support for a generic pci_host_bridge controller created from a description passed in the device tree. Changes from v6: - Made pci_register_io_range() return an error if PCI_IOBASE is not defined. When the cleanup of PCI_IOBASE use is going to happen, that will catch all those architectures that don't use virtual mapping of I/O ranges (like x86) or don't support PCI at all. - Improved the error handling in of_pci_range_to_resource() and made it propagate the error as well. - Bail out of the parsing of PCI ranges if of_pci_range_to_resource() fails. Changes from v5: - Tested by Tanmay Inamdar, thanks Tanmay! - dropped v5 5/7 pci: Use parent domain number when allocating child busses. - Added weak implementation of pcibios_fixup_bridge_ranges() in drivers/pci/host-bridge.c so that architectures that enable CONFIG_OF and CONFIG_PCI don't suddenly get compilation errors. While at this, changed the signature of the function so that an error can be returned. - With the new error code in pcibios_fixup_bridge_ranges(), reworked the error handling in pci_host_bridge_of_get_ranges() and of_create_pci_host_bridge(). - Add linux/slab.h to the #include list - Revisit the error path in pci_create_root_bus[_in_domain]() and fixed the case where failing to allocate the bus will not return an error. Changes from v4: - Export pci_find_host_bridge() to be used by arch code. There is scope for making the arch/arm64 version of pci_domain_nr the default weak implementation but that would double the size of this series in order to handle all #define versions of the pci_domain_nr() function, so I suggest keeping that for a separate cleanup series. Changes from v3: - Dynamically allocate bus_range resource in of_create_pci_host_bridge() - Fix the domain number used when creating child busses. - Changed domain number allocator to use atomic operations. - Use ERR_PTR() to propagate the error out of pci_create_root_bus_in_domain() and of_create_pci_host_bridge(). Changes from v2: - Use range->cpu_addr when calling pci_address_to_pio() - Introduce pci_register_io_range() helper function in order to register io ranges ahead of their conversion to PIO values. This is needed as no information is being stored yet regarding the range mapping, making pci_address_to_pio() fail. Default weak implementation does nothing, to cover the default weak implementation of pci_address_to_pio() that expects direct mapping of physical addresses into PIO values (x86 view). Changes from v1: - Add patch to fix conversion of IO ranges into IO resources. - Added a domain_nr member to pci_host_bridge structure, and a new function to create a root bus in a given domain number. In order to facilitate that I propose changing the order of initialisation between pci_host_bridge and it's related bus in pci_create_root_bus() as sort of a rever of 7b5436635800. This is done in patch 1/4 and 2/4. - Added a simple allocator of domain numbers in drivers/pci/host-bridge.c. The code will first try to get a domain id from of_alias_get_id(..., "pci-domain") and if that fails assign the next unallocated domain id. - Changed the name of the function that creates the generic host bridge from pci_host_bridge_of_init to of_create_pci_host_bridge and exported as GPL symbol. v6 thread here: https://lkml.org/lkml/2014/3/5/179 v5 thread here: https://lkml.org/lkml/2014/3/4/318 v4 thread here: https://lkml.org/lkml/2014/3/3/301 v3 thread here: https://lkml.org/lkml/2014/2/28/216 v2 thread here: https://lkml.org/lkml/2014/2/27/245 v1 thread here: https://lkml.org/lkml/2014/2/3/380 Best regards, Liviu Liviu Dudau (6): pci: Introduce pci_register_io_range() helper function. pci: OF: Fix the conversion of IO ranges into IO resources. pci: Create pci_host_bridge before its associated bus in pci_create_root_bus. pci: Introduce a domain number for pci_host_bridge. pci: Export find_pci_host_bridge() function. pci: Add support for creating a generic host_bridge from device tree drivers/of/address.c | 49 +++++++++++ drivers/pci/host-bridge.c | 161 ++++++++++++++++++++++++++++++++++- drivers/pci/probe.c | 73 ++++++++++------ include/linux/of_address.h | 14 +-- include/linux/pci.h | 17 ++++ 5 files changed, 278 insertions(+), 36 deletions(-) -- 1.9.0

10 years, 6 months

[PATCH 0/2] arm64: Add seccomp support

by AKASHI Takahiro

This patch enables secure computing (system call filtering) on arm64. System calls can be allowed or denied by loaded bpf-style rules. Architecture specific part is to run secure_computing() on syscall entry and check the result. See [1/2] Prerequisites are: * "arm64: Add audit support" patch * "arm64: make a single hook to syscall_trace() for all syscall features" patch This code is tested on ARMv8 fast model using libseccomp v2.1.1 with modifications for arm64 and verified by its "live" tests, 20, 21 and 24. AKASHI Takahiro (2): arm64: Add seccomp support arm64: is_compat_task is defined both in asm/compat.h and linux/compat.h arch/arm64/Kconfig | 17 +++++++++++++++++ arch/arm64/include/asm/compat.h | 2 ++ arch/arm64/include/asm/seccomp.h | 28 ++++++++++++++++++++++++++++ arch/arm64/include/asm/unistd.h | 3 +++ arch/arm64/kernel/entry.S | 4 ++++ arch/arm64/kernel/ptrace.c | 5 +++++ 6 files changed, 59 insertions(+) create mode 100644 arch/arm64/include/asm/seccomp.h -- 1.7.9.5

10 years, 6 months

[PATCH v2 0/6] arm64: Add ftrace support

by AKASHI Takahiro

This is my second version of patchset for ftrace support. Actually v1 was submitted serveral weeks ago, but is still moderated. (Just ignore them for now.) There is another implementation from Cavium network, but both works are independent, and my code has additional system call trace support. I confirmed that I could compile the patches on v3.12-rc4 by Linaro's coming 2013.10 gcc (4.8.2), and that the kernel worked on Fast Model with the following tracers: function tracer with dynamic ftrace function graph tracer with dynamic ftrace syscall tracepoint irqsoff & preemptirqsoff (which use CALLER_ADDRx) Also verified with in-kernel tests, FTRACE_SELFTEST, FTRACE_STARTUP_TEST and EVENT_TRACE_TEST_SYSCALLS. Patch[3/6] has warnings from checkpatch, but they follow other arch's style. Please be careful that host's elf.h must have AArch64 definitions, EM_AARCH64 and R_AARCH64_ABS64, to build the kernel. See [4/6]. Issues * Can we optimize register usages in asm (by not saving x0, x1 and x2)? [1/6] * Do we need "fault protection" code in ftrace_modify_code()? [1/6] It exists in x86 and other architectures, but not in arm. * We may be able to use aarch64_insn_patch_text_nosync() instead of ftrace_modify_code().[2/6] But the former function does not use probe_kernel_write(). Is this safe? Changes from v1 to v2: * splitted one patch into some pieces for easier review (especially function tracer + dynamic ftrace + CALLER_ADDRx) * put return_address() in a separate file * renamed __mcount to _mcount (it was my mistake) * changed stackframe handling to get parent's frame pointer * removed ARCH_SUPPORTS_FTRACE_OPS * switched to "hotpatch" interfaces from Huawai * revised descriptions in comments AKASHI Takahiro (6): arm64: Add ftrace support arm64: ftrace: Add dynamic ftrace support arm64: ftrace: Add CALLER_ADDRx macros ftrace: Add arm64 support to recordmcount arm64: ftrace: Add system call tracepoint arm64: Add 'notrace' attribute to unwind_frame() for ftrace arch/arm64/Kconfig | 6 + arch/arm64/include/asm/ftrace.h | 54 +++++++++ arch/arm64/include/asm/syscall.h | 1 + arch/arm64/include/asm/thread_info.h | 1 + arch/arm64/include/asm/unistd.h | 2 + arch/arm64/kernel/Makefile | 9 +- arch/arm64/kernel/arm64ksyms.c | 4 + arch/arm64/kernel/entry-ftrace.S | 211 ++++++++++++++++++++++++++++++++++ arch/arm64/kernel/entry.S | 1 + arch/arm64/kernel/ftrace.c | 186 ++++++++++++++++++++++++++++++ arch/arm64/kernel/ptrace.c | 10 ++ arch/arm64/kernel/return_address.c | 55 +++++++++ arch/arm64/kernel/stacktrace.c | 2 +- scripts/recordmcount.c | 4 + scripts/recordmcount.pl | 5 + 15 files changed, 549 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/include/asm/ftrace.h create mode 100644 arch/arm64/kernel/entry-ftrace.S create mode 100644 arch/arm64/kernel/ftrace.c create mode 100644 arch/arm64/kernel/return_address.c -- 1.7.9.5

10 years, 7 months

Re: [PATCH v6 2/2] ARM hibernation / suspend-to-disk

by Sebastian Capella

Quoting Sebastian Capella (2014-02-28 10:17:31) > Quoting Russell King - ARM Linux (2014-02-28 02:20:18) > > On Thu, Feb 27, 2014 at 06:19:49PM -0800, Stephen Boyd wrote: > > > On 02/27/14 17:47, Russ Dill wrote: > > > > On 02/27/2014 04:09 PM, Stephen Boyd wrote: > > > >> On 02/27/14 15:57, Sebastian Capella wrote: > > > >>> diff --git a/arch/arm/include/asm/memory.h > > > >>> b/arch/arm/include/asm/memory.h index 8756e4b..1079ea8 100644 --- > > > >>> a/arch/arm/include/asm/memory.h +++ > > > >>> b/arch/arm/include/asm/memory.h @@ -291,6 +291,7 @@ static inline > > > >>> void *phys_to_virt(phys_addr_t x) */ #define __pa(x) > > > >>> __virt_to_phys((unsigned long)(x)) #define __va(x) ((void > > > >>> *)__phys_to_virt((phys_addr_t)(x))) +#define __pa_symbol(x) > > > >>> __pa(RELOC_HIDE((unsigned long)(x), 0)) > > > >> Just curious, is there a reason for the RELOC_HIDE() here? Or > > > >> __pa_symbol() for that matter? It looks like only x86 uses this on > > > >> the __nosave_{begin,end} symbol. Maybe it's copy-pasta? > > > > From my understanding this needs to stick around so long as gcc 3.x is > > > > supported (did it get dropped yet?) on ARM Linux since it doesn't > > > > support -fno-strict-overflow. > > > > > > I don't think it's been dropped yet but I wonder if anyone has tried > > > recent kernels with such a compiler? > > > > > > Would the usage of &__pv_table_begin in arch/arm/mm/mmu.c also need the > > > same treatment? > > > > We've never had to play these kinds of games on ARM irrespective of > > compiler version. > > I am using gcc 4.6.3. I can try removing it but I suspect it will just > work without it. Let me see if I can get an older compiler and try both > ways. Hi, I've been struggling a bit to test 3.x compilers on this. I'm running an armv7 board, but the 3.x compilers I'm trying don't appear to suport armv7. Anyone have any suggestions? Is this a worthwhile effort? Thanks! Sebastian

10 years, 7 months

[PATCH] drm: Add 800x600 (SVGA) screen resolution to the built-in EDIDs

by Daniel Thompson

The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware. This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro. Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks. Signed-off-by: Daniel Thompson <daniel.thompson(a)linaro.org> --- Documentation/EDID/1024x768.S | 2 +- Documentation/EDID/1280x1024.S | 2 +- Documentation/EDID/1600x1200.S | 2 +- Documentation/EDID/1680x1050.S | 2 +- Documentation/EDID/1920x1080.S | 2 +- Documentation/EDID/800x600.S | 41 +++++++++++++++++++++++++++++++++++++++++ Documentation/EDID/HOWTO.txt | 2 +- Documentation/EDID/edid.S | 17 ++++++++++++++--- drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++- 9 files changed, 81 insertions(+), 10 deletions(-) create mode 100644 Documentation/EDID/800x600.S diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 4b486fe..6f3e4b7 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 #define CRC 0x55 diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index a2799fe..bd9bef2 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0xa0 diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index 0ded64c..a45101c 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x9d diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index 96f67ca..b0d7c69 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x26 diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 36ed5d5..3084355e 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x05 diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S new file mode 100644 index 0000000..6644e26 --- /dev/null +++ b/Documentation/EDID/800x600.S @@ -0,0 +1,41 @@ +/* + 800x600.S: EDID data set for standard 800x600 60 Hz monitor + + Copyright (C) 2011 Carsten Emde <C.Emde(a)osadl.org> + Copyright (C) 2014 Linaro Limited + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 40000 /* kHz */ +#define XPIX 800 +#define YPIX 600 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 256 +#define YBLANK 28 +#define XOFFSET 40 +#define XPULSE 128 +#define YOFFSET (63+1) +#define YPULSE (63+4) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SVGA" +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xc2 + +#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 7146db1..835db33 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware directory from where it is loaded via the firmware interface. The code (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200, +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does not contain code to create these data. In order to elucidate the origin of the built-in binary EDID blobs and to facilitate the creation of diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ea97ae2..7ac0327 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -33,6 +33,17 @@ #define XY_RATIO_5_4 0b10 #define XY_RATIO_16_9 0b11 +/* Provide defaults for the timing bits */ +#ifndef ESTABLISHED_TIMING1_BITS +#define ESTABLISHED_TIMING1_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING2_BITS +#define ESTABLISHED_TIMING2_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING3_BITS +#define ESTABLISHED_TIMING3_BITS 0x00 +#endif + #define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) @@ -139,7 +150,7 @@ white_x_y_msb: .byte 0x50,0x54 Bit 2 640x480 @ 75 Hz Bit 1 800x600 @ 56 Hz Bit 0 800x600 @ 60 Hz */ -estbl_timing1: .byte 0x00 +estbl_timing1: .byte ESTABLISHED_TIMING1_BITS /* Bit 7 800x600 @ 72 Hz Bit 6 800x600 @ 75 Hz @@ -149,11 +160,11 @@ estbl_timing1: .byte 0x00 Bit 2 1024x768 @ 72 Hz Bit 1 1024x768 @ 75 Hz Bit 0 1280x1024 @ 75 Hz */ -estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS +estbl_timing2: .byte ESTABLISHED_TIMING2_BITS /* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) Bits 6-0 Other manufacturer-specific display mod */ -estbl_timing3: .byte 0x00 +estbl_timing3: .byte ESTABLISHED_TIMING3_BITS /* Standard timing */ /* X resolution, less 31, divided by 8 (256-2288 pixels) */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 1b4c7a5..6e09f61 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " "from built-in data or /lib/firmware instead. "); -#define GENERIC_EDIDS 5 +#define GENERIC_EDIDS 6 static const char *generic_edid_name[GENERIC_EDIDS] = { + "edid/800x600.bin", "edid/1024x768.bin", "edid/1280x1024.bin", "edid/1600x1200.bin", @@ -44,6 +45,24 @@ static const u8 generic_edid[GENERIC_EDIDS][128] = { { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f, + 0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80, + 0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53, + 0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78, 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, 0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40, -- 1.9.0

10 years, 7 months

[PATCH v2 0/7] armv7 BE kvm support

by Victor Kamensky

Hi Guys, Here is second version of series that enables KVM support for V7 big endian kernels. Mostly it deals with BE KVM host support. Marc Zyngier showed before with his patches how BE guest could run on top LE host. With these patches BE guest runs on top of BE host. If Marc's kvmtool is used with few additional changes I tested that BE host could run LE guest. Also I verified that there were no regressions in BE guest on top of LE host case. Note that posted series covers only kernel side changes. The changes were tested inside of bigger setup with additional changes in qemu and kvmtool. I will post those changes separately in proper aliases but for completeness sake Appendix A gives pointers to git repositories and branches with all needed changes. Changes since V1: 1) Patch that handles issue of including assembler.h into kvm .S file now handled separately. It was posted before on mailing list [1]. This series depend on it. 2) Incorporated most of Christoffer V1 review comments. The only thing I did not do wrt Christoffer's suggestion is possible rework of 'one_reg coproc set and get BE fixes' patch. I think I put better explanation on what my code does, and if it is still not good we will go from there. 3) Moved rr_lo_hi macro into arch/arm/include/asm/kvm_asm.h along the lines Christoffer suggested 4) Split 'fix KVM assembler files to work in BE case' patch into 4 smaller one each handling one logic issue. Thanks, Victor [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/231432.… Victor Kamensky (7): ARM: KVM: switch hypervisor into BE mode in case of BE host ARM: KVM: fix vgic V7 assembler code to work in BE image ARM: KVM: handle 64bit values passed to mrcc or from mcrr instructions in BE case ARM: KVM: __kvm_vcpu_run function return result fix in BE case ARM: KVM: one_reg coproc set and get BE fixes ARM: KVM: vgic mmio should hold data as LE bytes array in BE case ARM: KVM: MMIO support BE host running LE code arch/arm/include/asm/kvm_asm.h | 23 +++++++++- arch/arm/include/asm/kvm_emulate.h | 22 +++++++-- arch/arm/kvm/coproc.c | 94 ++++++++++++++++++++++++++++---------- arch/arm/kvm/init.S | 7 ++- arch/arm/kvm/interrupts.S | 9 +++- arch/arm/kvm/interrupts_head.S | 32 +++++++++---- virt/kvm/arm/vgic.c | 4 +- 7 files changed, 145 insertions(+), 46 deletions(-) -- 1.8.1.4 Appendix A: Testing and Full Setup Description ---------------------------------------------- I) No mixed mode setup - i.e BE guest on BE host; and LE guest on LE host tested to make sure no regressions. KVM host and guest kernels: TC2 on top of Linus 3.13 (this patch series): git: git://git.linaro.org/people/victor.kamensky/linux-linaro-tracking-be.git branch: arm-be-kvm-3.13 range: 7098f45..78419d0 TC2 and Arndale on top of Linaro BE tree: git: git://git.linaro.org/people/victor.kamensky/linux-linaro-tracking-be.git branch: llct-be-20140211-kvm range: 308a752..ae47fa8 - TC1 kernels used as guests qemu: git: git://git.linaro.org/people/victor.kamensky/qemu-be.git branch: armv7be-v1 description: changes to run qemu on armeb target; and other changes to work with be image on top of be host kvmtool: git: git://git.linaro.org/people/victor.kamensky/linux-linaro-tracking-be.git branch: kvmtool-armv7be-v1 description: minimal changes to build kvmtool for armeb target; and tiny change with virtio magic II) Mixed mode setup all possible combinations within V7 (LE guest on BE host; BE guest on LE host as Marc's setup tested to make sure no regressions) only with kvmtool. This work is based on Marc Zyngier's work that made BE guest to run on top of LE host. For this setup special version of kvmtool should be used and in addition I had to apply patch to guest kernel that would switch reading virtio configs reads to be LE only, that is made on top of previous Rusty Russell's changes. Effectively I just had to do very minor addition to make LE guest to work on BE host, most of heavy lifting was done before by Marc. KVM host kernels: as in previous setup Guest TC1 kernels with LE virtio config patch: git: git://git.linaro.org/people/victor.kamensky/linux-linaro-tracking-be.git branch: virtio-leconfig-3.13-rc4 kvmtool: git: git://git.linaro.org/people/victor.kamensky/linux-linaro-tracking-be.git branch: kvmtool-mixed-v1 description: based on git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git branch kvm-arm64/kvmtool-be-on-le; adds missing include fix; above armeb target build patches; and one fix related to BE mode qemu: git: git://git.linaro.org/people/victor.kamensky/qemu-be.git branch: armv7be-leconfig-v1 description: change virtio-blk that so qemu could work with guest image where virtio leconfig is made; note it does not work in mixed mode; to do so qemu would need bunch of similar changes that Marc did in kvmtool

10 years, 7 months

[PATCH v7 0/3] Add support for PCI in AArch64

by Liviu Dudau

Hi, This patch adds support for PCI to AArch64. It is based on my v7 patch that adds support for creating generic host bridge structure from device tree. With that in place, I was able to boot a platform that has PCIe host bridge support and use a PCIe network card. I have dropped the RFC tag from the subject as I now have the ambitious goal of trying to get it mainlined. Changes from v6: - Guard the pci_domain_nr() inline implementation with #ifdef CONFIG_PCI as to avoid conflict with default empty version present in include/linux/pci.h. Thanks to Jingoo Han for catching this. Changes from v5: - Removed pcibios_fixup_bridge_ranges() as the week default version is fine. - Removed the ALIGN() call in pcibios_align_resource() - Stopped exporting pcibios_align_resource() Changes from v4: - Fixed the pci_domain_nr() implementation for arm64. Now we use find_pci_host_bride() to find the host bridge before we retrieve the domain number. Changes from v3: - Added Acks accumulated so far ;) - Still carrying Catalin's patch for moving the PCI_IO_BASE until it lands in linux-next or mainline, in order to ease applying the series Changes from v2: - Implement an arch specific version of pci_register_io_range() and pci_address_to_pio(). - Return 1 from pci_proc_domain(). Changes from v1: - Added Catalin's patch for moving the PCI_IO_BASE location and extend its size to 16MB - Integrated Arnd's version of pci_ioremap_io that uses a bitmap for keeping track of assigned IO space and returns an io_offset. At the moment the code is added in arch/arm64 but it can be moved in drivers/pci. - Added a fix for the generic ioport_map() function when !CONFIG_GENERIC_IOMAP as suggested by Arnd. v6 thread here: https://lkml.org/lkml/2014/3/5/41 v5 thread here: https://lkml.org/lkml/2014/3/4/307 v4 thread here: https://lkml.org/lkml/2014/3/3/298 v3 thread here: https://lkml.org/lkml/2014/2/28/211 v2 thread here: https://lkml.org/lkml/2014/2/27/255 v1 thread here: https://lkml.org/lkml/2014/2/3/389 The API used is different from the one used by ARM architecture. There is no pci_common_init_dev() function and no hw_pci structure, as that is no longer needed. Once the last signature is added to the legal agreement, I will post the host bridge driver code that I am using. Meanwhile, here is an example of what the probe function looks like, posted as an example: static int myhostbridge_probe(struct platform_device *pdev) { int err; struct device_node *dev; struct pci_host_bridge *bridge; struct myhostbridge_port *pp; resource_size_t lastbus; dev = pdev->dev.of_node; if (!of_device_is_available(dev)) { pr_warn("%s: disabled\n", dev->full_name); return -ENODEV; } pp = kzalloc(sizeof(struct myhostbridge_port), GFP_KERNEL); if (!pp) return -ENOMEM; bridge = of_create_pci_host_bridge(&pdev->dev, &myhostbridge_ops, pp); if (IS_ERR(bridge)) { err = PTR_ERR(bridge); goto bridge_create_fail; } err = myhostbridge_setup(bridge->bus); if (err) goto bridge_setup_fail; /* We always enable PCI domains and we keep domain 0 backward * compatible in /proc for video cards */ pci_add_flags(PCI_ENABLE_PROC_DOMAINS); pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC); lastbus = pci_scan_child_bus(bridge->bus); pci_bus_update_busn_res_end(bridge->bus, lastbus); pci_assign_unassigned_bus_resources(bridge->bus); pci_bus_add_devices(bridge->bus); return 0; bridge_setup_fail: put_device(&bridge->dev); device_unregister(&bridge->dev); bridge_create_fail: kfree(pp); return err; } Best regards, Liviu Catalin Marinas (1): arm64: Extend the PCI I/O space to 16MB Liviu Dudau (2): Fix ioport_map() for !CONFIG_GENERIC_IOMAP cases. arm64: Add architecture support for PCI Documentation/arm64/memory.txt | 16 +-- arch/arm64/Kconfig | 19 +++- arch/arm64/include/asm/Kbuild | 1 + arch/arm64/include/asm/io.h | 5 +- arch/arm64/include/asm/pci.h | 51 +++++++++ arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/pci.c | 173 +++++++++++++++++++++++++++++++ include/asm-generic/io.h | 2 +- 8 files changed, 258 insertions(+), 10 deletions(-) create mode 100644 arch/arm64/include/asm/pci.h create mode 100644 arch/arm64/kernel/pci.c -- 1.9.0

10 years, 7 months

[PATCH 0/4] arm64: Add audit support

by AKASHI Takahiro

This patchset adds audit support on arm64. The implementation is just like in other architectures, and so I think little explanation is needed. I verified this patch with some commands on both 64-bit rootfs and 32-bit rootfs(, but only in little-endian): # auditctl -a exit,always -S openat -F path=/etc/inittab # auditctl -a exit,always -F dir=/tmp -F perm=rw # auditctl -a task,always # autrace /bin/ls What else? (Thanks to Clayton for his cross-compiling patch) I'd like to discuss about the following issues: (issues) * AUDIT_ARCH_* Why do we need to distiguish big-endian and little-endian? [2/4] * AArch32 We need to add a check for identifying the endian in 32-bit tasks. [3/4] * syscall no in AArch32 Currently all the definitions are added in unistd32.h with "ifdef __AARCH32_AUDITSYSCALL" to use asm-generic/audit_*.h. [3/4] "ifdef" is necessary to avoid a conflict with 64-bit definitions. Do we need a more sophisticated way? * TIF_AUDITSYSCALL Most architectures, except x86, do not check TIF_AUDITSYSCALL. Why not? [4/4] * Userspace audit package There are some missing syscall definitions in lib/aarch64_table.h. There is no support for AUDIT_ARCH_ARM (I mean LE. armeb is BE). AKASHI Takahiro (4): audit: Enable arm64 support arm64: Add audit support arm64: audit: Add AArch32 support arm64: audit: Add audit hook in ptrace/syscall_trace arch/arm64/Kconfig | 3 + arch/arm64/include/asm/audit32.h | 12 ++ arch/arm64/include/asm/ptrace.h | 5 + arch/arm64/include/asm/syscall.h | 18 ++ arch/arm64/include/asm/thread_info.h | 1 + arch/arm64/include/asm/unistd32.h | 387 ++++++++++++++++++++++++++++++++++ arch/arm64/kernel/Makefile | 4 + arch/arm64/kernel/audit.c | 77 +++++++ arch/arm64/kernel/audit32.c | 46 ++++ arch/arm64/kernel/entry.S | 3 + arch/arm64/kernel/ptrace.c | 12 ++ include/uapi/linux/audit.h | 2 + init/Kconfig | 2 +- 13 files changed, 571 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/include/asm/audit32.h create mode 100644 arch/arm64/kernel/audit.c create mode 100644 arch/arm64/kernel/audit32.c -- 1.7.9.5

10 years, 8 months

[PATCH v7 0/2] hibernation support on ARM

by Sebastian Capella

Patches adding support for hibernation on ARM - ARM hibernation / suspend-to-disk - Change soft_restart to use non-tracing raw_local_irq_disable Patches based on v3.14-rc5 tag, verified hibernation on beaglebone black on a branch based on 3.13 merged with initial omap support from Russ Dill which can be found here (includes v1 patchset): http://git.linaro.org/git-ro/people/sebastian.capella/linux.git hibernation_3.13_russMerge [PATCH v7 1/2] ARM: avoid tracers in soft_restart arch/arm/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Use raw_local_irq_disable in place of local_irq_disable to avoid infinite abort recursion while tracing. (unchanged since v3) [PATCH v7 2/2] ARM hibernation / suspend-to-disk arch/arm/include/asm/memory.h | 1 + arch/arm/kernel/Makefile | 1 + arch/arm/kernel/hibernate.c | 108 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 5 ++ include/linux/suspend.h | 2 + 5 files changed, 117 insertions(+) Adds support for ARM based hibernation Additional notes: ----------------- There are two checkpatch warnings added by this patch. These follow behavior in existing hibernation implementations on other platforms. WARNING: externs should be avoided in .c files #120: FILE: arch/arm/kernel/hibernate.c:24: +extern const void __nosave_begin, __nosave_end; This extern is picking up the linker nosave region definitions, only used in hibernate. Follows same extern line used mips, powerpc, s390, sh, sparc, x86 & unicore32 WARNING: externs should be avoided in .c files #200: FILE: arch/arm/kernel/hibernate.c:104: + extern void call_with_stack(void (*fn)(void *), void *arg, void *sp); This extern is used in the arch/arm/ in hibernate, process and bL_switcher Changes in v7: -------------- * remove use of RELOC_HIDE macro * remove unused #includes * fixup comment for arch_restore_image * ensure alignment of resume stack on 8 byte boundary Changes in v6: -------------- * Simplify static variable names Changes in v5: -------------- * Fixed checkpatch warning on trailing whitespace Changes in v4: -------------- * updated comment for soft_restart with review feedback * dropped freeze_processes patch which was queued separately to 3.14 by Rafael Wysocki: https://lkml.org/lkml/2014/2/25/683 Changes in v3: -------------- * added comment to use of soft_restart * drop irq disable soft_restart patch * add patch to avoid tracers in soft_restart by using raw_local_irq_* Changes in v2: -------------- * Removed unneeded flush_thread, use of __naked and cpu_init. * dropped Cyril Chemparathy <cyril(a)ti.com> from Cc: list as emails are bouncing. Thanks, Sebastian Capella

10 years, 8 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel March 2014