The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware.
This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro.
Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks.
Signed-off-by: Daniel Thompson daniel.thompson@linaro.org --- Documentation/EDID/1024x768.S | 2 +- Documentation/EDID/1280x1024.S | 2 +- Documentation/EDID/1600x1200.S | 2 +- Documentation/EDID/1680x1050.S | 2 +- Documentation/EDID/1920x1080.S | 2 +- Documentation/EDID/800x600.S | 41 +++++++++++++++++++++++++++++++++++++++++ Documentation/EDID/HOWTO.txt | 2 +- Documentation/EDID/edid.S | 17 ++++++++++++++--- drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++- 9 files changed, 81 insertions(+), 10 deletions(-) create mode 100644 Documentation/EDID/800x600.S
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 4b486fe..6f3e4b7 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 #define CRC 0x55 diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index a2799fe..bd9bef2 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0xa0 diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index 0ded64c..a45101c 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x9d diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index 96f67ca..b0d7c69 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x26 diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 36ed5d5..3084355e 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x05 diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S new file mode 100644 index 0000000..6644e26 --- /dev/null +++ b/Documentation/EDID/800x600.S @@ -0,0 +1,41 @@ +/* + 800x600.S: EDID data set for standard 800x600 60 Hz monitor + + Copyright (C) 2011 Carsten Emde C.Emde@osadl.org + Copyright (C) 2014 Linaro Limited + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 40000 /* kHz */ +#define XPIX 800 +#define YPIX 600 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 256 +#define YBLANK 28 +#define XOFFSET 40 +#define XPULSE 128 +#define YOFFSET (63+1) +#define YPULSE (63+4) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SVGA" +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xc2 + +#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 7146db1..835db33 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware directory from where it is loaded via the firmware interface. The code (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200, +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does not contain code to create these data. In order to elucidate the origin of the built-in binary EDID blobs and to facilitate the creation of diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ea97ae2..7ac0327 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -33,6 +33,17 @@ #define XY_RATIO_5_4 0b10 #define XY_RATIO_16_9 0b11
+/* Provide defaults for the timing bits */ +#ifndef ESTABLISHED_TIMING1_BITS +#define ESTABLISHED_TIMING1_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING2_BITS +#define ESTABLISHED_TIMING2_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING3_BITS +#define ESTABLISHED_TIMING3_BITS 0x00 +#endif + #define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) @@ -139,7 +150,7 @@ white_x_y_msb: .byte 0x50,0x54 Bit 2 640x480 @ 75 Hz Bit 1 800x600 @ 56 Hz Bit 0 800x600 @ 60 Hz */ -estbl_timing1: .byte 0x00 +estbl_timing1: .byte ESTABLISHED_TIMING1_BITS
/* Bit 7 800x600 @ 72 Hz Bit 6 800x600 @ 75 Hz @@ -149,11 +160,11 @@ estbl_timing1: .byte 0x00 Bit 2 1024x768 @ 72 Hz Bit 1 1024x768 @ 75 Hz Bit 0 1280x1024 @ 75 Hz */ -estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS +estbl_timing2: .byte ESTABLISHED_TIMING2_BITS
/* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) Bits 6-0 Other manufacturer-specific display mod */ -estbl_timing3: .byte 0x00 +estbl_timing3: .byte ESTABLISHED_TIMING3_BITS
/* Standard timing */ /* X resolution, less 31, divided by 8 (256-2288 pixels) */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 1b4c7a5..6e09f61 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " "from built-in data or /lib/firmware instead. ");
-#define GENERIC_EDIDS 5 +#define GENERIC_EDIDS 6 static const char *generic_edid_name[GENERIC_EDIDS] = { + "edid/800x600.bin", "edid/1024x768.bin", "edid/1280x1024.bin", "edid/1600x1200.bin", @@ -44,6 +45,24 @@ static const u8 generic_edid[GENERIC_EDIDS][128] = { { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f, + 0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80, + 0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53, + 0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78, 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, 0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,
The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware.
This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro.
Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks.
Signed-off-by: Daniel Thompson daniel.thompson@linaro.org --- Documentation/EDID/1024x768.S | 2 +- Documentation/EDID/1280x1024.S | 2 +- Documentation/EDID/1600x1200.S | 2 +- Documentation/EDID/1680x1050.S | 2 +- Documentation/EDID/1920x1080.S | 2 +- Documentation/EDID/800x600.S | 41 +++++++++++++++++++++++++++++++++++++++++ Documentation/EDID/HOWTO.txt | 2 +- Documentation/EDID/edid.S | 17 ++++++++++++++--- drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++- 9 files changed, 81 insertions(+), 10 deletions(-) create mode 100644 Documentation/EDID/800x600.S
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 4b486fe..6f3e4b7 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 #define CRC 0x55 diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index a2799fe..bd9bef2 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0xa0 diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index 0ded64c..a45101c 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x9d diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index 96f67ca..b0d7c69 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x26 diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 36ed5d5..3084355e 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x05 diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S new file mode 100644 index 0000000..6644e26 --- /dev/null +++ b/Documentation/EDID/800x600.S @@ -0,0 +1,41 @@ +/* + 800x600.S: EDID data set for standard 800x600 60 Hz monitor + + Copyright (C) 2011 Carsten Emde C.Emde@osadl.org + Copyright (C) 2014 Linaro Limited + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 40000 /* kHz */ +#define XPIX 800 +#define YPIX 600 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 256 +#define YBLANK 28 +#define XOFFSET 40 +#define XPULSE 128 +#define YOFFSET (63+1) +#define YPULSE (63+4) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SVGA" +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xc2 + +#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 7146db1..835db33 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware directory from where it is loaded via the firmware interface. The code (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200, +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does not contain code to create these data. In order to elucidate the origin of the built-in binary EDID blobs and to facilitate the creation of diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ea97ae2..7ac0327 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -33,6 +33,17 @@ #define XY_RATIO_5_4 0b10 #define XY_RATIO_16_9 0b11
+/* Provide defaults for the timing bits */ +#ifndef ESTABLISHED_TIMING1_BITS +#define ESTABLISHED_TIMING1_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING2_BITS +#define ESTABLISHED_TIMING2_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING3_BITS +#define ESTABLISHED_TIMING3_BITS 0x00 +#endif + #define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) @@ -139,7 +150,7 @@ white_x_y_msb: .byte 0x50,0x54 Bit 2 640x480 @ 75 Hz Bit 1 800x600 @ 56 Hz Bit 0 800x600 @ 60 Hz */ -estbl_timing1: .byte 0x00 +estbl_timing1: .byte ESTABLISHED_TIMING1_BITS
/* Bit 7 800x600 @ 72 Hz Bit 6 800x600 @ 75 Hz @@ -149,11 +160,11 @@ estbl_timing1: .byte 0x00 Bit 2 1024x768 @ 72 Hz Bit 1 1024x768 @ 75 Hz Bit 0 1280x1024 @ 75 Hz */ -estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS +estbl_timing2: .byte ESTABLISHED_TIMING2_BITS
/* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) Bits 6-0 Other manufacturer-specific display mod */ -estbl_timing3: .byte 0x00 +estbl_timing3: .byte ESTABLISHED_TIMING3_BITS
/* Standard timing */ /* X resolution, less 31, divided by 8 (256-2288 pixels) */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 1b4c7a5..6e09f61 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " "from built-in data or /lib/firmware instead. ");
-#define GENERIC_EDIDS 5 +#define GENERIC_EDIDS 6 static const char *generic_edid_name[GENERIC_EDIDS] = { + "edid/800x600.bin", "edid/1024x768.bin", "edid/1280x1024.bin", "edid/1600x1200.bin", @@ -44,6 +45,24 @@ static const u8 generic_edid[GENERIC_EDIDS][128] = { { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f, + 0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80, + 0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53, + 0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78, 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, 0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,
On Fri, Apr 25, 2014 at 4:34 AM, Daniel Thompson daniel.thompson@linaro.org wrote:
The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware.
This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro.
Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks.
Signed-off-by: Daniel Thompson daniel.thompson@linaro.org
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Documentation/EDID/1024x768.S | 2 +- Documentation/EDID/1280x1024.S | 2 +- Documentation/EDID/1600x1200.S | 2 +- Documentation/EDID/1680x1050.S | 2 +- Documentation/EDID/1920x1080.S | 2 +- Documentation/EDID/800x600.S | 41 +++++++++++++++++++++++++++++++++++++++++ Documentation/EDID/HOWTO.txt | 2 +- Documentation/EDID/edid.S | 17 ++++++++++++++--- drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++- 9 files changed, 81 insertions(+), 10 deletions(-) create mode 100644 Documentation/EDID/800x600.S
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 4b486fe..6f3e4b7 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 #define CRC 0x55 diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index a2799fe..bd9bef2 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0xa0 diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index 0ded64c..a45101c 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x9d diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index 96f67ca..b0d7c69 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x26 diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 36ed5d5..3084355e 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x05 diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S new file mode 100644 index 0000000..6644e26 --- /dev/null +++ b/Documentation/EDID/800x600.S @@ -0,0 +1,41 @@ +/*
- 800x600.S: EDID data set for standard 800x600 60 Hz monitor
- Copyright (C) 2011 Carsten Emde C.Emde@osadl.org
- Copyright (C) 2014 Linaro Limited
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License
- as published by the Free Software Foundation; either version 2
- of the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+*/
+/* EDID */ +#define VERSION 1 +#define REVISION 3
+/* Display */ +#define CLOCK 40000 /* kHz */ +#define XPIX 800 +#define YPIX 600 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 256 +#define YBLANK 28 +#define XOFFSET 40 +#define XPULSE 128 +#define YOFFSET (63+1) +#define YPULSE (63+4) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SVGA" +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xc2
+#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 7146db1..835db33 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware directory from where it is loaded via the firmware interface. The code (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200, +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does not contain code to create these data. In order to elucidate the origin of the built-in binary EDID blobs and to facilitate the creation of diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ea97ae2..7ac0327 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -33,6 +33,17 @@ #define XY_RATIO_5_4 0b10 #define XY_RATIO_16_9 0b11
+/* Provide defaults for the timing bits */ +#ifndef ESTABLISHED_TIMING1_BITS +#define ESTABLISHED_TIMING1_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING2_BITS +#define ESTABLISHED_TIMING2_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING3_BITS +#define ESTABLISHED_TIMING3_BITS 0x00 +#endif
#define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) @@ -139,7 +150,7 @@ white_x_y_msb: .byte 0x50,0x54 Bit 2 640x480 @ 75 Hz Bit 1 800x600 @ 56 Hz Bit 0 800x600 @ 60 Hz */ -estbl_timing1: .byte 0x00 +estbl_timing1: .byte ESTABLISHED_TIMING1_BITS
/* Bit 7 800x600 @ 72 Hz Bit 6 800x600 @ 75 Hz @@ -149,11 +160,11 @@ estbl_timing1: .byte 0x00 Bit 2 1024x768 @ 72 Hz Bit 1 1024x768 @ 75 Hz Bit 0 1280x1024 @ 75 Hz */ -estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS +estbl_timing2: .byte ESTABLISHED_TIMING2_BITS
/* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) Bits 6-0 Other manufacturer-specific display mod */ -estbl_timing3: .byte 0x00 +estbl_timing3: .byte ESTABLISHED_TIMING3_BITS
/* Standard timing */ /* X resolution, less 31, divided by 8 (256-2288 pixels) */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 1b4c7a5..6e09f61 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " "from built-in data or /lib/firmware instead. ");
-#define GENERIC_EDIDS 5 +#define GENERIC_EDIDS 6 static const char *generic_edid_name[GENERIC_EDIDS] = {
"edid/800x600.bin", "edid/1024x768.bin", "edid/1280x1024.bin", "edid/1600x1200.bin",@@ -44,6 +45,24 @@ static const u8 generic_edid[GENERIC_EDIDS][128] = { { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78,0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25,0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40,0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f,0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80,0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e,0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e,0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20,0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b,0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20,0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc,0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53,0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2,},{0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78, 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, 0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,-- 1.9.0
dri-devel mailing list dri-devel@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/dri-devel
The 800x600 (SVGA) screen resolution was lacking in the set of built-in selectable EDID screen resolutions that can be used to repair misbehaving monitor firmware.
This patch adds the related data set and expands the documentation. Note that the SVGA bit occupies a different byte to all the existing users of the established timing bits forcing a rework of the ESTABLISHED_TIMINGS_BITS macro.
Tested new EDID on an aged (and misbehaving) industrial LCD panel; existing EDIDs still pass edid-decode's checksum checks.
Signed-off-by: Daniel Thompson daniel.thompson@linaro.org Cc: Randy Dunlap rdunlap@infradead.org Cc: David Airlie airlied@linux.ie Cc: Carsten Emde C.Emde@osadl.org Cc: linux-doc@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Alex Deucher alexander.deucher@amd.com --- Documentation/EDID/1024x768.S | 2 +- Documentation/EDID/1280x1024.S | 2 +- Documentation/EDID/1600x1200.S | 2 +- Documentation/EDID/1680x1050.S | 2 +- Documentation/EDID/1920x1080.S | 2 +- Documentation/EDID/800x600.S | 41 +++++++++++++++++++++++++++++++++++++++++ Documentation/EDID/HOWTO.txt | 2 +- Documentation/EDID/edid.S | 17 ++++++++++++++--- drivers/gpu/drm/drm_edid_load.c | 21 ++++++++++++++++++++- 9 files changed, 81 insertions(+), 10 deletions(-) create mode 100644 Documentation/EDID/800x600.S
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S index 4b486fe..6f3e4b7 100644 --- a/Documentation/EDID/1024x768.S +++ b/Documentation/EDID/1024x768.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux XGA" -#define ESTABLISHED_TIMINGS_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ +#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */ #define HSYNC_POL 0 #define VSYNC_POL 0 #define CRC 0x55 diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S index a2799fe..bd9bef2 100644 --- a/Documentation/EDID/1280x1024.S +++ b/Documentation/EDID/1280x1024.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux SXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0xa0 diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S index 0ded64c..a45101c 100644 --- a/Documentation/EDID/1600x1200.S +++ b/Documentation/EDID/1600x1200.S @@ -36,7 +36,7 @@ #define DPI 72 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux UXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x9d diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S index 96f67ca..b0d7c69 100644 --- a/Documentation/EDID/1680x1050.S +++ b/Documentation/EDID/1680x1050.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux WSXGA" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x26 diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S index 36ed5d5..3084355e 100644 --- a/Documentation/EDID/1920x1080.S +++ b/Documentation/EDID/1920x1080.S @@ -36,7 +36,7 @@ #define DPI 96 #define VFREQ 60 /* Hz */ #define TIMING_NAME "Linux FHD" -#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */ +/* No ESTABLISHED_TIMINGx_BITS */ #define HSYNC_POL 1 #define VSYNC_POL 1 #define CRC 0x05 diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S new file mode 100644 index 0000000..6644e26 --- /dev/null +++ b/Documentation/EDID/800x600.S @@ -0,0 +1,41 @@ +/* + 800x600.S: EDID data set for standard 800x600 60 Hz monitor + + Copyright (C) 2011 Carsten Emde C.Emde@osadl.org + Copyright (C) 2014 Linaro Limited + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. +*/ + +/* EDID */ +#define VERSION 1 +#define REVISION 3 + +/* Display */ +#define CLOCK 40000 /* kHz */ +#define XPIX 800 +#define YPIX 600 +#define XY_RATIO XY_RATIO_4_3 +#define XBLANK 256 +#define YBLANK 28 +#define XOFFSET 40 +#define XPULSE 128 +#define YOFFSET (63+1) +#define YPULSE (63+4) +#define DPI 72 +#define VFREQ 60 /* Hz */ +#define TIMING_NAME "Linux SVGA" +#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */ +#define HSYNC_POL 1 +#define VSYNC_POL 1 +#define CRC 0xc2 + +#include "edid.S" diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt index 7146db1..835db33 100644 --- a/Documentation/EDID/HOWTO.txt +++ b/Documentation/EDID/HOWTO.txt @@ -18,7 +18,7 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an individually prepared or corrected EDID data set in the /lib/firmware directory from where it is loaded via the firmware interface. The code (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for -commonly used screen resolutions (1024x768, 1280x1024, 1600x1200, +commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200, 1680x1050, 1920x1080) as binary blobs, but the kernel source tree does not contain code to create these data. In order to elucidate the origin of the built-in binary EDID blobs and to facilitate the creation of diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S index ea97ae2..7ac0327 100644 --- a/Documentation/EDID/edid.S +++ b/Documentation/EDID/edid.S @@ -33,6 +33,17 @@ #define XY_RATIO_5_4 0b10 #define XY_RATIO_16_9 0b11
+/* Provide defaults for the timing bits */ +#ifndef ESTABLISHED_TIMING1_BITS +#define ESTABLISHED_TIMING1_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING2_BITS +#define ESTABLISHED_TIMING2_BITS 0x00 +#endif +#ifndef ESTABLISHED_TIMING3_BITS +#define ESTABLISHED_TIMING3_BITS 0x00 +#endif + #define mfgname2id(v1,v2,v3) \ ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f)) #define swap16(v1) ((v1>>8)+((v1&0xff)<<8)) @@ -139,7 +150,7 @@ white_x_y_msb: .byte 0x50,0x54 Bit 2 640x480 @ 75 Hz Bit 1 800x600 @ 56 Hz Bit 0 800x600 @ 60 Hz */ -estbl_timing1: .byte 0x00 +estbl_timing1: .byte ESTABLISHED_TIMING1_BITS
/* Bit 7 800x600 @ 72 Hz Bit 6 800x600 @ 75 Hz @@ -149,11 +160,11 @@ estbl_timing1: .byte 0x00 Bit 2 1024x768 @ 72 Hz Bit 1 1024x768 @ 75 Hz Bit 0 1280x1024 @ 75 Hz */ -estbl_timing2: .byte ESTABLISHED_TIMINGS_BITS +estbl_timing2: .byte ESTABLISHED_TIMING2_BITS
/* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II) Bits 6-0 Other manufacturer-specific display mod */ -estbl_timing3: .byte 0x00 +estbl_timing3: .byte ESTABLISHED_TIMING3_BITS
/* Standard timing */ /* X resolution, less 31, divided by 8 (256-2288 pixels) */ diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index 1b4c7a5..6e09f61 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -31,8 +31,9 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644); MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob " "from built-in data or /lib/firmware instead. ");
-#define GENERIC_EDIDS 5 +#define GENERIC_EDIDS 6 static const char *generic_edid_name[GENERIC_EDIDS] = { + "edid/800x600.bin", "edid/1024x768.bin", "edid/1280x1024.bin", "edid/1600x1200.bin", @@ -44,6 +45,24 @@ static const u8 generic_edid[GENERIC_EDIDS][128] = { { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78, + 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, + 0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f, + 0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80, + 0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e, + 0x00, 0x00, 0x00, 0xff, 0x00, 0x4c, 0x69, 0x6e, + 0x75, 0x78, 0x20, 0x23, 0x30, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x3b, + 0x3d, 0x24, 0x26, 0x05, 0x00, 0x0a, 0x20, 0x20, + 0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfc, + 0x00, 0x4c, 0x69, 0x6e, 0x75, 0x78, 0x20, 0x53, + 0x56, 0x47, 0x41, 0x0a, 0x20, 0x20, 0x00, 0xc2, + }, + { + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x16, 0x01, 0x03, 0x6d, 0x23, 0x1a, 0x78, 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, 0x20, 0x50, 0x54, 0x00, 0x08, 0x00, 0x61, 0x40,
After 07d410e0) serial: sirf: fix spinlock deadlock issue it is no longer possiblet to compile this driver. The rename of one of the spinlocks is faulty. After looking at the original patch I believe this is the correct fix.
Compile tested using ARM's multi_v7_defconfig
Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Jiri Slaby jslaby@suse.cz Cc: Barry Song baohua@kernel.org Cc: Qipan Li Qipan.Li@csr.com Cc: linux-serial@vger.kernel.org Signed-off-by: Daniel Thompson daniel.thompson@linaro.org ---
Notes: Sorry to resend within a few minutes. Patch is identical to parent but the subject line has been corrected. The original 'v6' was just utterly wrong! This patch is a not-previously-shared patch to fix a build regression that appears in tty-next.
drivers/tty/serial/sirfsoc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 236f892..1f2be48 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -704,7 +704,7 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long flags; struct dma_tx_state tx_state; - spin_lock_irqsave(&port->rx_lock, flags); + spin_lock_irqsave(&port->lock, flags); while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
2014-05-29 18:13 GMT+08:00 Daniel Thompson daniel.thompson@linaro.org:
After 07d410e0) serial: sirf: fix spinlock deadlock issue it is no longer possiblet to compile this driver. The rename of one of the spinlocks is faulty. After looking at the original patch I believe this is the correct fix.
Compile tested using ARM's multi_v7_defconfig
Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Jiri Slaby jslaby@suse.cz Cc: Barry Song baohua@kernel.org Cc: Qipan Li Qipan.Li@csr.com Cc: linux-serial@vger.kernel.org Signed-off-by: Daniel Thompson daniel.thompson@linaro.org
Qipan prepared a same patch to fix this. since you have sent,
Acked-by: Barry Song baohua@kernel.org
Notes: Sorry to resend within a few minutes. Patch is identical to parent but the subject line has been corrected. The original 'v6' was just utterly wrong! This patch is a not-previously-shared patch to fix a build regression that appears in tty-next.
drivers/tty/serial/sirfsoc_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 236f892..1f2be48 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -704,7 +704,7 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; unsigned long flags; struct dma_tx_state tx_state;
spin_lock_irqsave(&port->rx_lock, flags);
spin_lock_irqsave(&port->lock, flags); while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { sirfsoc_uart_insert_rx_buf_to_tty(sirfport,-- 1.9.0
On Thu, May 29, 2014 at 08:14:02PM +0800, Barry Song wrote:
2014-05-29 18:13 GMT+08:00 Daniel Thompson daniel.thompson@linaro.org:
After 07d410e0) serial: sirf: fix spinlock deadlock issue it is no longer possiblet to compile this driver. The rename of one of the spinlocks is faulty. After looking at the original patch I believe this is the correct fix.
Compile tested using ARM's multi_v7_defconfig
Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Jiri Slaby jslaby@suse.cz Cc: Barry Song baohua@kernel.org Cc: Qipan Li Qipan.Li@csr.com Cc: linux-serial@vger.kernel.org Signed-off-by: Daniel Thompson daniel.thompson@linaro.org
Qipan prepared a same patch to fix this.
Why didn't he send it?
2014-05-30 2:25 GMT+08:00 Greg Kroah-Hartman gregkh@linuxfoundation.org:
On Thu, May 29, 2014 at 08:14:02PM +0800, Barry Song wrote:
2014-05-29 18:13 GMT+08:00 Daniel Thompson daniel.thompson@linaro.org:
After 07d410e0) serial: sirf: fix spinlock deadlock issue it is no longer possiblet to compile this driver. The rename of one of the spinlocks is faulty. After looking at the original patch I believe this is the correct fix.
Compile tested using ARM's multi_v7_defconfig
Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Jiri Slaby jslaby@suse.cz Cc: Barry Song baohua@kernel.org Cc: Qipan Li Qipan.Li@csr.com Cc: linux-serial@vger.kernel.org Signed-off-by: Daniel Thompson daniel.thompson@linaro.org
Qipan prepared a same patch to fix this.
Why didn't he send it?
it is not that he didn't want to send, it is because Daniel has sent the same patch earlier.
-barry
linaro-kernel@lists.linaro.org
-
Alex Deucher -
Barry Song -
Daniel Thompson -
Greg Kroah-Hartman