linaro-kernel March 2014

linaro-kernel@lists.linaro.org

86 participants
221 discussions

arm-soc boot: 38 pass, 6 fail (v3.14-rc5-948-g9e61eb0)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-948-g9e61eb0 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.9 sec legacy,da850evm PASS: 0 min 14.6 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 48.9 sec am335x-boneblack PASS: 0 min 26.1 sec omap3-beagle-xm PASS: 1 min 4.1 sec legacy,3530beagle PASS: 1 min 13.6 sec omap4-panda PASS: 1 min 6.6 sec omap3-overo-tobi PASS: 0 min 23.6 sec am335x-bone PASS: 0 min 27.8 sec omap3-overo-storm-tobi PASS: 0 min 25.8 sec omap4-panda-es PASS: 1 min 7.8 sec legacy,3730storm PASS: 0 min 20.7 sec legacy,3530overo PASS: 0 min 22.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec imx6q-wandboard PASS: 0 min 17.6 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.6 sec sun4i-a10-cubieboard FAIL: 0 min 18.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.5 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 30.5 sec tegra30-beaver PASS: 0 min 21.9 sec am335x-boneblack PASS: 0 min 24.1 sec omap3-beagle-xm PASS: 0 min 52.5 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.5 sec omap4-panda PASS: 0 min 54.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard FAIL: 0 min 20.1 sec bcm28155-ap PASS: 1 min 15.9 sec omap3-overo-tobi PASS: 0 min 22.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.1 sec am335x-bone PASS: 0 min 26.9 sec omap3-overo-storm-tobi PASS: 0 min 21.6 sec imx6q-wandboard PASS: 0 min 17.2 sec omap4-panda-es PASS: 0 min 51.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-5R7Sp_/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-5R7Sp_/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-5R7Sp_/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4546824 (456108 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-5R7Sp_/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-5R7Sp_/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-5R7Sp_/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x456108 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.21 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i#setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-NA_Jww/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-NA_Jww/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-NA_Jww/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1775320 (1b16d8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-NA_Jww/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-NA_Jww/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-NA_Jww/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b16d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.58 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-KF0TPn/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-KF0TPn/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-KF0TPn/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1775320 (1b16d8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-KF0TPn/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-KF0TPn/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-KF0TPn/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b16d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.09 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $tftp 0x00800000 192.168.1.2:tmp/snowball-XgX51v/tmpuKkxyY-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-XgX51v/tmpuKkxyY-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-XgX51v/tmpuKkxyY-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### done Bytes transferred = 4563137 (45a0c1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4563073 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.52 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-Tv8Lz8/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-Tv8Lz8/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Tv8Lz8/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################# 2.7 MiB/s done Bytes transferred = 4521824 (44ff60 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-Tv8Lz8/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-Tv8Lz8/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Tv8Lz8/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44ff60 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.11 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

next boot: 23 pass, 23 fail (next-20140317)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140317 Failed boot tests (console logs at the end) =========================================== am335x-boneblack: FAIL: omap2plus_defconfig omap3-beagle-xm: FAIL: omap2plus_defconfig omap4-panda: FAIL: omap2plus_defconfig omap3-overo-tobi: FAIL: omap2plus_defconfig am335x-bone: FAIL: omap2plus_defconfig omap3-overo-storm-tobi: FAIL: omap2plus_defconfig omap5-uevm: FAIL: omap2plus_defconfig omap4-panda-es: FAIL: omap2plus_defconfig omap5-uevm: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig am335x-boneblack: FAIL: multi_v7_defconfig omap3-beagle-xm: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig omap3-overo-tobi: FAIL: multi_v7_defconfig am335x-bone: FAIL: multi_v7_defconfig omap3-overo-storm-tobi: FAIL: multi_v7_defconfig omap5-uevm: FAIL: multi_v7_defconfig omap4-panda-es: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 16.0 sec legacy,da850evm PASS: 0 min 15.3 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.3 sec am335x-boneblack FAIL: 0 min 28.5 sec omap3-beagle-xm FAIL: 0 min 53.1 sec legacy,3530beagle PASS: 1 min 31.3 sec omap4-panda FAIL: 0 min 57.3 sec omap3-overo-tobi FAIL: 0 min 28.6 sec am335x-bone FAIL: 0 min 30.5 sec omap3-overo-storm-tobi FAIL: 0 min 29.4 sec omap5-uevm FAIL: 0 min 57.1 sec omap4-panda-es FAIL: 0 min 56.5 sec legacy,3730storm PASS: 0 min 23.3 sec legacy,3530overo PASS: 0 min 24.4 sec multi_lpae_defconfig -------------------- omap5-uevm FAIL: 0 min 52.1 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.2 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.1 sec sun4i-a10-cubieboard FAIL: 0 min 22.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.8 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.4 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 4.2 sec ste-snowball FAIL: 0 min 33.7 sec tegra30-beaver PASS: 0 min 20.0 sec am335x-boneblack FAIL: 0 min 29.0 sec omap3-beagle-xm FAIL: 0 min 51.5 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda FAIL: 0 min 57.7 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.8 sec sun4i-a10-cubieboard FAIL: 0 min 19.9 sec bcm28155-ap PASS: 1 min 9.5 sec omap3-overo-tobi FAIL: 0 min 28.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone FAIL: 0 min 30.6 sec omap3-overo-storm-tobi FAIL: 0 min 26.5 sec omap5-uevm FAIL: 0 min 58.4 sec imx6q-wandboard PASS: 0 min 17.7 sec omap4-panda-es FAIL: 0 min 58.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.8 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.7 sec Console logs for failures ========================= omap2plus_defconfig ------------------- am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot#dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xboneb-nOmzee/zImage tftp 0x80200000 192.168.1.2:tmp/am335xboneb-nOmzee/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-nOmzee/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306272 (41b560 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-nOmzee/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-nOmzee/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-nOmzee/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1 MiB/s done Bytes transferred = 29374 (72be hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a2bd Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.48 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-AAFE8o/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-AAFE8o/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-AAFE8o/zImage'. Load address: 0x80200000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 390.6 KiB/s done Bytes transferred = 4306272 (41b560 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 114.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-AAFE8o/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-AAFE8o/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-AAFE8o/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 10.7 KiB/s done Bytes transferred = 58437 (e445 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org #bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62444 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 53.08 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.152 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-jzuita/zImage tftp 0x82000000 192.168.1.2:tmp/4430panda-jzuita/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-jzuita/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 471.7 KiB/s done Bytes transferred = 4306272 (41b560 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-jzuita/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-jzuita/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-jzuita/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 9.8 KiB/s done Bytes transferred = 51505 (c931 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f930 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.26 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-i2QL5U/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-i2QL5U/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-i2QL5U/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4306272 (41b560 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-i2QL5U/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-i2QL5U/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-i2QL5U/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.2 MiB/s done Bytes transferred = 57343 (dfff hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff52000, end 8ff62ffe ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.60 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-1Iv4Rq/zImage tftp 0x80200000 192.168.1.2:tmp/am335xbone-1Iv4Rq/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-1Iv4Rq/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 1.2 MiB/s done Bytes transferred = 4306272 (41b560 hex) U-Boot#tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-1Iv4Rq/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-1Iv4Rq/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-1Iv4Rq/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28778 (706a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a069 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.46 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-Pqaqjg/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-Pqaqjg/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-Pqaqjg/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4306272 (41b560 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-Pqaqjg/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-Pqaqjg/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-Pqaqjg/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.2 MiB/s done Bytes transferred = 58183 (e347 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffee000, end 8ffff346 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.38 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- scanning bus 0 for devices... found: 002/079 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-ejACCY/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-ejACCY/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-ejACCY/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 421.9 KiB/s done Bytes transferred = 4306272 (41b560 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 91.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-ejACCY/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-ejACCY/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-ejACCY/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 7.8 KiB/s done Bytes transferred = 44586 (ae2a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x41b560 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8de29 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.10 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-XAE3Lz/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-XAE3Lz/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-XAE3Lz/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 470.7 KiB/s done Bytes transferred = 4306272 (41b560 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 104.5 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-XAE3Lz/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-XAE3Lz/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-XAE3Lz/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 9.8 KiB/s done Bytes transferred = 52085 (cb75 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fb74 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 56.54 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/079 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-0wYPP4/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-0wYPP4/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-0wYPP4/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 631.8 KiB/s done Bytes transferred = 4586448 (45fbd0 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *T ############################################ 114.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-0wYPP4/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-0wYPP4/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-0wYPP4/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *T #### 7.8 KiB/s done Bytes transferred = 44586 (ae2a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x45fbd0 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8de29 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 52.08 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-sgJSTp/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-sgJSTp/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-sgJSTp/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4586448 (45fbd0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-sgJSTp/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-sgJSTp/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-sgJSTp/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45fbd0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.98 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i#setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-YFIskG/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-YFIskG/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-YFIskG/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1792960 (1b5bc0 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-YFIskG/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-YFIskG/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-YFIskG/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5bc0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.07 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i#dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-1kuK60/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-1kuK60/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-1kuK60/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1792960 (1b5bc0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-1kuK60/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-1kuK60/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-1kuK60/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2 MiB/s done Bytes transferred = 12614 (3146 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5bc0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff145 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.00 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-jqThkX/tmpTwSnXA-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-jqThkX/tmpTwSnXA-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-jqThkX/tmpTwSnXA-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ###################################################### done Bytes transferred = 4604169 (464109 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4604105 Bytes = 4.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.66 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.1.150 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot#if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot#tftp 0x80200000 192.168.1.2:tmp/am335xboneb-YNHE29/zImage tftp 0x80200000 192.168.1.2:tmp/am335xboneb-YNHE29/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-YNHE29/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 1.2 MiB/s done Bytes transferred = 4562856 (459fa8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.2 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-YNHE29/am335x-boneblack.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xboneb-YNHE29/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.150 Filename 'tmp/am335xboneb-YNHE29/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *### 1.1 MiB/s done Bytes transferred = 29374 (72be hex) U-Boot#printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.150:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 9f19a000, end 9f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a2bd Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.00 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 80 lines of boot log: ------------------------------------------------- USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-bhB9Uv/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-bhB9Uv/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-bhB9Uv/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 486.3 KiB/s done Bytes transferred = 4562856 (459fa8 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 114.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-bhB9Uv/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-bhB9Uv/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-bhB9Uv/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 10.7 KiB/s done Bytes transferred = 58437 (e445 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62444 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 51.52 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-FYPxKS/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-FYPxKS/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-FYPxKS/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4562856 (459fa8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-FYPxKS/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-FYPxKS/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-FYPxKS/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x459fa8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.35 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.152 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4430panda-SySJsL/zImage tftp 0x82000000 192.168.1.2:tmp/4430panda-SySJsL/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-SySJsL/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 492.2 KiB/s done Bytes transferred = 4562856 (459fa8 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4430panda-SySJsL/omap4-panda.dtb tftp 0x81f00000 192.168.1.2:tmp/4430panda-SySJsL/omap4-panda.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.152 Filename 'tmp/4430panda-SySJsL/omap4-panda.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 6.8 KiB/s done Bytes transferred = 51505 (c931 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.152:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0f930 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 57.71 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-UsFaes/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-UsFaes/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-UsFaes/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.7 MiB/s done Bytes transferred = 4562856 (459fa8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-UsFaes/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-UsFaes/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-UsFaes/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12614 (3146 hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x459fa8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff145 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.85 seconds. # PYBOOT: Result: FAIL omap3-overo-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------- Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-SJ9v4U/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-SJ9v4U/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-SJ9v4U/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.4 MiB/s done Bytes transferred = 4562856 (459fa8 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3530overo-SJ9v4U/omap3-overo-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3530overo-SJ9v4U/omap3-overo-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-SJ9v4U/omap3-overo-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 57343 (dfff hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff52000, end 8ff62ffe ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.08 seconds. # PYBOOT: Result: FAIL am335x-bone: FAIL: last 80 lines of boot log: --------------------------------------------- GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U-Boot# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U-Boot# if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U-Boot# setenv autoload no; setenv autoboot nodhcp U-Boot# dhcp cpsw Waiting for PHY auto negotiation to complete.. done link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.198 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x80200000 192.168.1.2:tmp/am335xbone-02Y1RA/zImage tftp 0x80200000 192.168.1.2:tmp/am335xbone-02Y1RA/zImage link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-02Y1RA/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 1.2 MiB/s done Bytes transferred = 4562856 (459fa8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 1.1 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x81f00000 192.168.1.2:tmp/am335xbone-02Y1RA/am335x-bone.dtb tftp 0x81f00000 192.168.1.2:tmp/am335xbone-02Y1RA/am335x-bone.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 192.168.1.2; our IP address is 192.168.1.198 Filename 'tmp/am335xbone-02Y1RA/am335x-bone.dtb'. Load address: 0x81f00000 Loading: *## 1.1 MiB/s done Bytes transferred = 28778 (706a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.198:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x80200000 0x81000000 0x81f00000 bootz 0x80200000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8f19a000, end 8f236dea ... OK Using Device Tree in place at 81f00000, end 81f0a069 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.58 seconds. # PYBOOT: Result: FAIL omap3-overo-storm-tobi: FAIL: last 80 lines of boot log: -------------------------------------------------------- No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-ziDy4H/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-ziDy4H/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-ziDy4H/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### 2.4 MiB/s done Bytes transferred = 4562856 (459fa8 hex) Overo # tftp 0x81f00000 192.168.1.2:tmp/3730storm-ziDy4H/omap3-overo-storm-tobi.dtb tftp 0x81f00000 192.168.1.2:tmp/3730storm-ziDy4H/omap3-overo-storm-tobi.dtb smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-ziDy4H/omap3-overo-storm-tobi.dtb'. Load address: 0x81f00000 Loading: *#### 2.3 MiB/s done Bytes transferred = 58183 (e347 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo #bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Device Tree to 8ffee000, end 8ffff346 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.50 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- scanning bus 0 for devices... found: 002/079 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.249 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-OJVwFU/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-OJVwFU/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-OJVwFU/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 442.4 KiB/s done Bytes transferred = 4562856 (459fa8 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 93.8 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-OJVwFU/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-OJVwFU/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.249 Filename 'tmp/omap5uevm-OJVwFU/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 7.8 KiB/s done Bytes transferred = 44586 (ae2a hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.249:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x459fa8 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8de29 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.42 seconds. # PYBOOT: Result: FAIL omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Panda # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Panda # dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.157 Panda # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Panda # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Panda # tftp 0x82000000 192.168.1.2:tmp/4460panda-es-V8kmEa/zImage tftp 0x82000000 192.168.1.2:tmp/4460panda-es-V8kmEa/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-V8kmEa/zImage'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 493.2 KiB/s done Bytes transferred = 4562856 (459fa8 hex) Panda # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 118.2 KiB/s done Bytes transferred = 642602 (9ce2a hex) Panda # tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-V8kmEa/omap4-panda-es.dtb tftp 0x81f00000 192.168.1.2:tmp/4460panda-es-V8kmEa/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.157 Filename 'tmp/4460panda-es-V8kmEa/omap4-panda-es.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 9.8 KiB/s done Bytes transferred = 52085 (cb75 hex) Panda # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.157:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Panda # bootz 0x82000000 0x81000000 0x81f00000 bootz 0x82000000 0x81000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0fb74 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 58.59 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

arm-soc boot: 38 pass, 6 fail (v3.14-rc5-862-g19ec938)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-862-g19ec938 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.6 sec legacy,da850evm PASS: 0 min 14.7 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.3 sec am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 0 min 59.9 sec legacy,3530beagle PASS: 1 min 14.4 sec omap4-panda PASS: 1 min 8.7 sec omap3-overo-tobi PASS: 0 min 23.4 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 25.6 sec omap4-panda-es PASS: 1 min 13.6 sec legacy,3730storm PASS: 0 min 23.6 sec legacy,3530overo PASS: 0 min 21.5 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.2 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 22.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.3 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.6 sec sun4i-a10-cubieboard FAIL: 0 min 18.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.3 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.8 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.4 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 24.1 sec omap3-beagle-xm PASS: 0 min 49.7 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 52.9 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 20.0 sec bcm28155-ap PASS: 0 min 59.0 sec omap3-overo-tobi PASS: 0 min 22.2 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 26.7 sec omap3-overo-storm-tobi PASS: 0 min 21.3 sec imx6q-wandboard PASS: 0 min 17.0 sec omap4-panda-es PASS: 0 min 54.1 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.7 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.2 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-YQ3mbL/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-YQ3mbL/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-YQ3mbL/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4543736 (4554f8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-YQ3mbL/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-YQ3mbL/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-YQ3mbL/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x4554f8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.16 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-A_UuOT/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-A_UuOT/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-A_UuOT/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1775320 (1b16d8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-A_UuOT/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-A_UuOT/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-A_UuOT/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b16d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.65 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i#if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-LctteW/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-LctteW/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-LctteW/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.8 MiB/s done Bytes transferred = 1775320 (1b16d8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-LctteW/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-LctteW/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-LctteW/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b16d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.10 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-ljoZ_J/tmpMJhH71-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-ljoZ_J/tmpMJhH71-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-ljoZ_J/tmpMJhH71-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### done Bytes transferred = 4559865 (4593f9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4559801 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.42 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i#if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-7NMPpx/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-7NMPpx/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-7NMPpx/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ 2.7 MiB/s done Bytes transferred = 4518552 (44f298 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i#tftp 0x41000000 192.168.1.2:tmp/cubie-7NMPpx/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-7NMPpx/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-7NMPpx/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44f298 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.01 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

arm-soc boot: 38 pass, 6 fail (v3.14-rc5-861-g5a0102a)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: arm-soc Git describe: v3.14-rc5-861-g5a0102a Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.4 sec legacy,da850evm PASS: 0 min 14.8 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 52.1 sec am335x-boneblack PASS: 0 min 26.0 sec omap3-beagle-xm PASS: 1 min 2.5 sec legacy,3530beagle PASS: 1 min 14.6 sec omap4-panda PASS: 1 min 12.0 sec omap3-overo-tobi PASS: 0 min 23.7 sec am335x-bone PASS: 0 min 27.8 sec omap3-overo-storm-tobi PASS: 0 min 25.5 sec omap4-panda-es PASS: 1 min 6.7 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 22.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 20.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.5 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.1 sec sun4i-a10-cubieboard FAIL: 0 min 18.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 11.4 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 30.4 sec tegra30-beaver PASS: 0 min 19.5 sec am335x-boneblack PASS: 0 min 24.1 sec omap3-beagle-xm PASS: 0 min 50.4 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 52.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.1 sec sun4i-a10-cubieboard FAIL: 0 min 22.9 sec bcm28155-ap PASS: 1 min 1.9 sec omap3-overo-tobi PASS: 0 min 22.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 26.8 sec omap3-overo-storm-tobi PASS: 0 min 21.5 sec imx6q-wandboard PASS: 0 min 17.1 sec omap4-panda-es PASS: 0 min 52.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.1 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-jhesak/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-jhesak/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-jhesak/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4543744 (455500 hex) sun7i#tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-jhesak/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-jhesak/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-jhesak/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x455500 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.07 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-7le3w6/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-7le3w6/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-7le3w6/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1775320 (1b16d8 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-7le3w6/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-7le3w6/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-7le3w6/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b16d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.07 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-IQHDBe/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-IQHDBe/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-IQHDBe/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1775320 (1b16d8 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-IQHDBe/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-IQHDBe/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-IQHDBe/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b16d8 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.32 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Command(snowball console)> hardreset (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version U8500 $ versionsetenv ethaddr 6e:e6:84:36:8e:9e U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9esetenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none'if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${initenv}; then run initenv; fiif test -n ${preboot}; then run preboot; fi U8500 $ if test -n ${preboot}; then run preboot; fisetenv autoload no; setenv autoboot no U8500 $ setenv autoload no; setenv autoboot nodhcp U8500 $ dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-UPH7ab/tmpOIPtue-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-UPH7ab/tmpOIPtue-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-UPH7ab/tmpOIPtue-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### done Bytes transferred = 4559865 (4593f9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4559801 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.39 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-wKGOTb/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-wKGOTb/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-wKGOTb/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ 2.7 MiB/s done Bytes transferred = 4518552 (44f298 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i#tftp 0x41000000 192.168.1.2:tmp/cubie-wKGOTb/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-wKGOTb/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-wKGOTb/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44f298 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 22.85 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

mainline boot: 48 pass, 0 fail (v3.14-rc7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc7 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.6 sec legacy,da850evm PASS: 0 min 14.8 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 50.5 sec am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 1 min 0.8 sec legacy,3530beagle PASS: 1 min 21.8 sec omap4-panda PASS: 1 min 10.2 sec omap3-overo-tobi PASS: 0 min 26.6 sec am335x-bone PASS: 0 min 27.8 sec omap3-overo-storm-tobi PASS: 0 min 25.0 sec omap5-uevm PASS: 1 min 3.3 sec omap4-panda-es PASS: 1 min 13.5 sec legacy,3730storm PASS: 0 min 20.7 sec legacy,3530overo PASS: 0 min 21.9 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 55.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.3 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 15.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 0.1 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.3 sec sun4i-a10-cubieboard PASS: 0 min 13.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 19.6 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 56.6 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec armada-370-mirabox PASS: 0 min 22.6 sec omap4-panda PASS: 0 min 59.8 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.0 sec sun4i-a10-cubieboard PASS: 0 min 19.2 sec bcm28155-ap PASS: 0 min 58.9 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec am335x-bone PASS: 0 min 26.4 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 49.6 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 1 min 32.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 19.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

mainline boot: 48 pass, 0 fail (v3.14-rc6-163-g59bf6c3)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc6-163-g59bf6c3 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.6 sec legacy,da850evm PASS: 0 min 14.8 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 55.1 sec am335x-boneblack PASS: 0 min 26.6 sec omap3-beagle-xm PASS: 1 min 0.4 sec legacy,3530beagle PASS: 1 min 13.5 sec omap4-panda PASS: 1 min 10.8 sec omap3-overo-tobi PASS: 0 min 23.8 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 25.5 sec omap5-uevm PASS: 1 min 2.2 sec omap4-panda-es PASS: 1 min 10.7 sec legacy,3730storm PASS: 0 min 23.9 sec legacy,3530overo PASS: 0 min 21.8 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 50.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.0 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 19.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 1 min 14.5 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.3 sec sun4i-a10-cubieboard PASS: 0 min 13.1 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.8 sec tegra30-beaver PASS: 0 min 26.6 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 51.5 sec sun7i-a20-cubieboard2 PASS: 0 min 14.7 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 52.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.4 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec bcm28155-ap PASS: 1 min 4.1 sec omap3-overo-tobi PASS: 0 min 22.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 24.8 sec omap5-uevm PASS: 1 min 51.5 sec imx6q-wandboard PASS: 0 min 17.6 sec omap4-panda-es PASS: 0 min 55.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.0 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

[PATCH v3] audit: generic compat system call support

by AKASHI Takahiro

Arm64 supports 32-bit mode(AArch32) and 64-bit mode(AArch64). To enable audit on arm64, we want to use lib/audit.c and re-work it to support compat system calls as well without copying it under arch sub-directory. So this patch is mandatory for my "system call audit support for arm64" patch. Please review it as well for better understandings. This code was tested on armv8 fast model with 64-bit and 32-bit userland by using modified audit-test-code. Changes v1 -> v2: * Specify AUDIT_CLASS_XYZ_32 instead of AUDIT_CLASS_XYZ when registering compat syscalls (bug fix) AKASHI Takahiro (1): audit: Add generic compat syscall support include/linux/audit.h | 9 +++++++++ lib/Makefile | 3 +++ lib/audit.c | 17 +++++++++++++++++ lib/compat_audit.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 80 insertions(+) create mode 100644 lib/compat_audit.c -- 1.7.9.5

10 years, 3 months

next boot: 33 pass, 13 fail (next-20140314)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: next Git describe: next-20140314 Failed boot tests (console logs at the end) =========================================== da850-evm: FAIL: da8xx_omapl_defconfig legacy,da850evm: FAIL: da8xx_omapl_defconfig legacy,3730xm: FAIL: omap2plus_defconfig legacy,3530beagle: FAIL: omap2plus_defconfig legacy,3730storm: FAIL: omap2plus_defconfig legacy,3530overo: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig legacy,dm365evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm FAIL: 0 min 20.0 sec legacy,da850evm FAIL: 0 min 21.2 sec omap2plus_defconfig ------------------- legacy,3730xm FAIL: 0 min 45.4 sec am335x-boneblack PASS: 0 min 26.1 sec omap3-beagle-xm PASS: 1 min 1.7 sec legacy,3530beagle FAIL: 0 min 29.7 sec omap4-panda PASS: 1 min 6.4 sec omap3-overo-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 22.0 sec omap5-uevm PASS: 1 min 7.1 sec omap4-panda-es PASS: 1 min 8.8 sec legacy,3730storm FAIL: 0 min 24.7 sec legacy,3530overo FAIL: 0 min 26.4 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 50.9 sec sun7i-a20-cubieboard2 FAIL: 0 min 20.0 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.3 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.9 sec imx6q-wandboard PASS: 0 min 17.4 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 18.1 sec sun4i-a10-cubieboard FAIL: 0 min 18.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ qcom-apq8074-dragonboard PASS: 1 min 1.4 sec ste-snowball FAIL: 0 min 33.6 sec tegra30-beaver PASS: 0 min 19.7 sec am335x-boneblack PASS: 0 min 24.5 sec omap3-beagle-xm PASS: 0 min 54.5 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.3 sec omap4-panda PASS: 0 min 55.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.5 sec sun4i-a10-cubieboard FAIL: 0 min 22.8 sec bcm28155-ap PASS: 1 min 4.0 sec omap3-overo-tobi PASS: 0 min 22.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.5 sec am335x-bone PASS: 0 min 26.9 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 48.8 sec imx6q-wandboard PASS: 0 min 17.5 sec omap4-panda-es PASS: 1 min 20.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 34.1 sec sama5_defconfig --------------- sama5d35ek PASS: 1 min 3.3 sec davinci_all_defconfig --------------------- legacy,dm365evm FAIL: 0 min 22.6 sec Console logs for failures ========================= da8xx_omapl_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot > setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-vB20VJ/zImage-dtb-K9_wVk tftp 0xc0800000 192.168.1.2:tmp/da850evm-vB20VJ/zImage-dtb-K9_wVk Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-vB20VJ/zImage-dtb-K9_wVk'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ######################## 1.7 MiB/s done Bytes transferred = 2256847 (226fcf hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x2254b8 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.02 seconds. # PYBOOT: Result: FAIL legacy,da850evm: FAIL: last 80 lines of boot log: ------------------------------------------------- Valid magicnum, 0x55424CBB, found at offset 0x00010000. DONE Jumping to entry point at 0xC1080000. MMC: davinci: 0 SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot > version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot > setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-rNxaNr/zImage tftp 0xc0800000 192.168.1.2:tmp/da850evm-rNxaNr/zImage Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-rNxaNr/zImage'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ######################## 1.7 MiB/s done Bytes transferred = 2249912 (2254b8 hex) U-Boot >tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 bootz 0xc0800000 0xc0c00000 Kernel image @ 0xc0800000 [ 0x000000 - 0x2254b8 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 21.17 seconds. # PYBOOT: Result: FAIL omap2plus_defconfig ------------------- legacy,3730xm: FAIL: last 80 lines of boot log: ----------------------------------------------- U-Boot 2013.04 (Jan 17 2014 - 10:48:29) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org # setenv usbethaddr 2a:45:34:6d:b4:5d setenv usbethaddr 2a:45:34:6d:b4:5d OMAP3 beagleboard.org # setenv preboot "dcache off; usb start" # For USB net setenv preboot "dcache off; usb start" # For USB net OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3730xm-5kHPC5/zImage tftp 0x80200000 192.168.1.2:tmp/3730xm-5kHPC5/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-5kHPC5/zImage'. Load address: 0x80200000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 417 KiB/s done Bytes transferred = 4304688 (41af30 hex) OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ############################################ 114.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 45.42 seconds. # PYBOOT: Result: FAIL legacy,3530beagle: FAIL: last 80 lines of boot log: --------------------------------------------------- NAND read from offset 260000 failed -74 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle Rev C1/C2/C3 Timed out in wait_for_event: status=0000 Check if pads/pull-ups of bus 1 are properly configured No EEPROM on expansion board Die ID #5ac400030000000004013f8901001001 Net: usb_ether Hit any key to stop autoboot: 3 0 OMAP3 beagleboard.org # OMAP3 beagleboard.org # version version U-Boot 2014.01-rc3 (Jan 17 2014 - 09:19:33) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.2 OMAP3 beagleboard.org # setenv preboot usb start # For USB net dongle setenv preboot usb start # For USB net dongle OMAP3 beagleboard.org # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 OMAP3 beagleboard.org # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' OMAP3 beagleboard.org # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi OMAP3 beagleboard.org # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found OMAP3 beagleboard.org # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2362/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.191 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x80200000 192.168.1.2:tmp/3530beagle-gbUII8/zImage tftp 0x80200000 192.168.1.2:tmp/3530beagle-gbUII8/zImage Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.191 Filename 'tmp/3530beagle-gbUII8/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.8 MiB/s done Bytes transferred = 4304688 (41af30 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.191:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none OMAP3 beagleboard.org # bootz 0x80200000 bootz 0x80200000 Kernel image @ 0x80200000 [ 0x000000 - 0x41af30 ] Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 29.74 seconds. # PYBOOT: Result: FAIL legacy,3730storm: FAIL: last 80 lines of boot log: -------------------------------------------------- U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Board revision: 1 Tranceiver detected on mmc2 No EEPROM on expansion board Die ID #3dea00029ff80000016830c40802e016 Net: smc911x-0 Warning: smc911x-0 using MAC address from net device Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00003-g84ebf5d (Jun 21 2013 - 15:36:05) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 DHCP client bound to address 192.168.1.195 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3730storm-kFRmxh/zImage tftp 0x80200000 192.168.1.2:tmp/3730storm-kFRmxh/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 00:15:c9:28:f0:11 Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.195 Filename 'tmp/3730storm-kFRmxh/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4304688 (41af30 hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.195:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 bootz 0x80200000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 24.69 seconds. # PYBOOT: Result: FAIL legacy,3530overo: FAIL: last 80 lines of boot log: -------------------------------------------------- Hit any key to stop autoboot: 5 0 Overo # Overo # version version U-Boot 2013.04-00002-gb766d9a-dirty (Jun 19 2013 - 17:29:16) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 Overo # setenv ethaddr fe:06:88:cd:08:6f setenv ethaddr fe:06:88:cd:08:6f Overo # setenv bootargs console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 Overo # setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f BOOTP broadcast 1 DHCP client bound to address 192.168.1.155 Overo # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Overo # if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Overo # tftp 0x80200000 192.168.1.2:tmp/3530overo-bszhCL/zImage tftp 0x80200000 192.168.1.2:tmp/3530overo-bszhCL/zImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'tmp/3530overo-bszhCL/zImage'. Load address: 0x80200000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################## 2.4 MiB/s done Bytes transferred = 4304688 (41af30 hex) Overo # tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC fe:06:88:cd:08:6f Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.155 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *############################################ 2.4 MiB/s done Bytes transferred = 642602 (9ce2a hex) Overo # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk debug rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.155:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none Overo # bootz 0x80200000 0x81000000 bootz 0x80200000 0x81000000 ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 26.36 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-QCnRSP/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-QCnRSP/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-QCnRSP/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 2.7 MiB/s done Bytes transferred = 4583072 (45eea0 hex) sun7i#tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-QCnRSP/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-QCnRSP/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-QCnRSP/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x45eea0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.02 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-iJ2dQa/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-iJ2dQa/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-iJ2dQa/zImage'. Load address: 0x40008000 Loading: *################################################################# ########################################################## 2.7 MiB/s done Bytes transferred = 1793360 (1b5d50 hex) sun7i#tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i#tftp 0x41000000 192.168.1.2:tmp/cubie2-iJ2dQa/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-iJ2dQa/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-iJ2dQa/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.1 MiB/s done Bytes transferred = 15603 (3cf3 hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i#bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b5d50 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcf2 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.07 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i#dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193

10 years, 3 months

mainline boot: 47 pass, 0 fail (v3.14-rc6-133-gc60f7d5)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc6-133-gc60f7d5 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.8 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 55.5 sec am335x-boneblack PASS: 0 min 26.1 sec omap3-beagle-xm PASS: 1 min 0.7 sec legacy,3530beagle PASS: 0 min 39.3 sec omap4-panda PASS: 1 min 11.5 sec omap3-overo-tobi PASS: 0 min 23.3 sec am335x-bone PASS: 0 min 27.9 sec omap3-overo-storm-tobi PASS: 0 min 24.8 sec omap5-uevm PASS: 1 min 5.5 sec omap4-panda-es PASS: 1 min 11.2 sec legacy,3730storm PASS: 0 min 24.0 sec legacy,3530overo PASS: 0 min 21.7 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 45.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 19.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 19.1 sec imx6q-wandboard PASS: 0 min 17.5 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 9.5 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 53.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 13.2 sec sun4i-a10-cubieboard PASS: 0 min 18.3 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 20.4 sec tegra30-beaver PASS: 0 min 20.1 sec am335x-boneblack PASS: 0 min 23.8 sec omap3-beagle-xm PASS: 0 min 47.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.8 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 55.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 14.4 sec bcm28155-ap PASS: 1 min 4.3 sec omap3-overo-tobi PASS: 0 min 21.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.8 sec am335x-bone PASS: 0 min 26.5 sec omap3-overo-storm-tobi PASS: 0 min 24.2 sec omap5-uevm PASS: 1 min 51.2 sec imx6q-wandboard PASS: 0 min 18.6 sec omap4-panda-es PASS: 0 min 49.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.7 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 17.1 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

[PATCH 1/2] cpufreq: arm_big_little: make vexpress driver dependent on bL core driver

by Viresh Kumar

Currently vexpress big LITTLE driver selects ARM_BIG_LITTLE_CPUFREQ and so if CONFIG_BIG_LITTLE isn't enabled and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ is enabled we get below warnings while compiling: warning: (ARM_VEXPRESS_SPC_CPUFREQ) selects ARM_BIG_LITTLE_CPUFREQ which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && (ARM || ARM64) && ARM && BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK) To fix this make ARM_VEXPRESS_SPC_CPUFREQ dependent on ARM_BIG_LITTLE_CPUFREQ instead of selecting it. This also moves entry for ARM_VEXPRESS_SPC_CPUFREQ along with other big LITTLE config entries. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- Hi Rafael, Both of these are fixes, please see if they can make it to 3.14 only. Thanks. drivers/cpufreq/Kconfig.arm | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 3129749..9fb6270 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -2,6 +2,7 @@ # ARM CPU Frequency scaling drivers # +# big LITTLE core layer and glue drivers config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM && BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK @@ -16,6 +17,14 @@ config ARM_DT_BL_CPUFREQ This enables probing via DT for Generic CPUfreq driver for ARM big.LITTLE platform. This gets frequency tables from DT. +config ARM_VEXPRESS_SPC_CPUFREQ + tristate "Versatile Express SPC based CPUfreq driver" + depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC + help + This add the CPUfreq driver support for Versatile Express + big.LITTLE platforms using SPC for power management. + + config ARM_EXYNOS_CPUFREQ bool @@ -241,11 +250,3 @@ config ARM_TEGRA_CPUFREQ default y help This adds the CPUFreq driver support for TEGRA SOCs. - -config ARM_VEXPRESS_SPC_CPUFREQ - tristate "Versatile Express SPC based CPUfreq driver" - select ARM_BIG_LITTLE_CPUFREQ - depends on ARCH_VEXPRESS_SPC - help - This add the CPUfreq driver support for Versatile Express - big.LITTLE platforms using SPC for power management. -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

← Newer
1
...
11
12
13
14
15
16
17
...
23
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel March 2014