linaro-kernel March 2014

linaro-kernel@lists.linaro.org

86 participants
221 discussions

mainline boot: 47 pass, 0 fail (v3.14-rc6-17-g8712a00)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc6-17-g8712a00 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 51.2 sec am335x-boneblack PASS: 0 min 25.5 sec omap3-beagle-xm PASS: 1 min 1.2 sec legacy,3530beagle PASS: 0 min 58.8 sec omap4-panda PASS: 1 min 9.9 sec omap3-overo-tobi PASS: 0 min 23.1 sec am335x-bone PASS: 0 min 27.4 sec omap3-overo-storm-tobi PASS: 0 min 25.2 sec omap5-uevm PASS: 1 min 2.2 sec omap4-panda-es PASS: 1 min 9.4 sec legacy,3730storm PASS: 0 min 22.9 sec legacy,3530overo PASS: 0 min 21.3 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 46.9 sec sun7i-a20-cubieboard2 PASS: 0 min 14.3 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.4 sec imx6q-wandboard PASS: 0 min 17.0 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 0 min 59.0 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.6 sec sun4i-a10-cubieboard PASS: 0 min 12.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.3 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.0 sec tegra30-beaver PASS: 0 min 27.5 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 51.3 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 55.6 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 18.6 sec bcm28155-ap PASS: 0 min 58.9 sec omap3-overo-tobi PASS: 0 min 21.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec am335x-bone PASS: 0 min 25.9 sec omap3-overo-storm-tobi PASS: 0 min 23.9 sec omap5-uevm PASS: 1 min 45.0 sec imx6q-wandboard PASS: 0 min 17.3 sec omap4-panda-es PASS: 0 min 57.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.0 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.2 sec armada-370-mirabox PASS: 0 min 20.1 sec

10 years, 3 months

[PATCH Resend] PM: Remove unnecessary !!

by Viresh Kumar

Double ! or !! are normally required to get 0 or 1 out of a expression. A comparision always returns 0 or 1 and hence there is no need to apply double ! over it again. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- kernel/power/suspend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 62ee437..90b3d93 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -39,7 +39,7 @@ static const struct platform_suspend_ops *suspend_ops; static bool need_suspend_ops(suspend_state_t state) { - return !!(state > PM_SUSPEND_FREEZE); + return state > PM_SUSPEND_FREEZE; } static DECLARE_WAIT_QUEUE_HEAD(suspend_freeze_wait_head); -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

[PATCH] mfd: wm5102: Mark register write sequencer control 3 readable

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> During init the core checks if the wm5102 has finished starting by reading register 0x19 and looking at the value. This read always fails since this is not a readable register, mark it as being one. While we're at it provide a constant for the register name (as supplied by Charles Keepax). Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/mfd/arizona-core.c | 3 ++- drivers/mfd/wm5102-tables.c | 1 + include/linux/mfd/arizona/registers.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 1c3ae57082ed..d4919fa2797a 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -745,7 +745,8 @@ int arizona_dev_init(struct arizona *arizona) /* Ensure device startup is complete */ switch (arizona->type) { case WM5102: - ret = regmap_read(arizona->regmap, 0x19, &val); + ret = regmap_read(arizona->regmap, + ARIZONA_WRITE_SEQUENCER_CTRL_3, &val); if (ret != 0) dev_err(dev, "Failed to check write sequencer state: %d\n", diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index f4668d39e542..e32736c3ab57 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -1016,6 +1016,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_WRITE_SEQUENCER_CTRL_0: case ARIZONA_WRITE_SEQUENCER_CTRL_1: case ARIZONA_WRITE_SEQUENCER_CTRL_2: + case ARIZONA_WRITE_SEQUENCER_CTRL_3: case ARIZONA_WRITE_SEQUENCER_PROM: case ARIZONA_TONE_GENERATOR_1: case ARIZONA_TONE_GENERATOR_2: diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 90d57aec34e7..f6ad81e923ac 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -27,6 +27,7 @@ #define ARIZONA_WRITE_SEQUENCER_CTRL_0 0x16 #define ARIZONA_WRITE_SEQUENCER_CTRL_1 0x17 #define ARIZONA_WRITE_SEQUENCER_CTRL_2 0x18 +#define ARIZONA_WRITE_SEQUENCER_CTRL_3 0x19 #define ARIZONA_WRITE_SEQUENCER_PROM 0x1A #define ARIZONA_TONE_GENERATOR_1 0x20 #define ARIZONA_TONE_GENERATOR_2 0x21 -- 1.9.0

10 years, 3 months

[PATCH] mfd: wm5102: Mark register 0x19 readable

by Mark Brown

From: Mark Brown <broonie(a)linaro.org> During init the core checks if the wm5102 has finished starting by reading register 0x19 and looking at the value. This read always fails since this is not a readable register, mark it as being one. Signed-off-by: Mark Brown <broonie(a)linaro.org> --- drivers/mfd/wm5102-tables.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index f4668d39e542..07f024fd4ded 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -1016,6 +1016,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_WRITE_SEQUENCER_CTRL_0: case ARIZONA_WRITE_SEQUENCER_CTRL_1: case ARIZONA_WRITE_SEQUENCER_CTRL_2: + case 0x19: case ARIZONA_WRITE_SEQUENCER_PROM: case ARIZONA_TONE_GENERATOR_1: case ARIZONA_TONE_GENERATOR_2: -- 1.9.0

10 years, 3 months

[PATCH v5 0/7] [RFC] Support for creating generic host_bridge from device tree

by Liviu Dudau

This is v5 of my attempt to add support for a generic pci_host_bridge controller created from a description passed in the device tree. Changes from v4: - Export pci_find_host_bridge() to be used by arch code. There is scope for making the arch/arm64 version of pci_domain_nr the default weak implementation but that would double the size of this series in order to handle all #define versions of the pci_domain_nr() function, so I suggest keeping that for a separate cleanup series. Changes from v3: - Dynamically allocate bus_range resource in of_create_pci_host_bridge() - Fix the domain number used when creating child busses. - Changed domain number allocator to use atomic operations. - Use ERR_PTR() to propagate the error out of pci_create_root_bus_in_domain() and of_create_pci_host_bridge(). Changes from v2: - Use range->cpu_addr when calling pci_address_to_pio() - Introduce pci_register_io_range() helper function in order to register io ranges ahead of their conversion to PIO values. This is needed as no information is being stored yet regarding the range mapping, making pci_address_to_pio() fail. Default weak implementation does nothing, to cover the default weak implementation of pci_address_to_pio() that expects direct mapping of physical addresses into PIO values (x86 view). Changes from v1: - Add patch to fix conversion of IO ranges into IO resources. - Added a domain_nr member to pci_host_bridge structure, and a new function to create a root bus in a given domain number. In order to facilitate that I propose changing the order of initialisation between pci_host_bridge and it's related bus in pci_create_root_bus() as sort of a rever of 7b5436635800. This is done in patch 1/4 and 2/4. - Added a simple allocator of domain numbers in drivers/pci/host-bridge.c. The code will first try to get a domain id from of_alias_get_id(..., "pci-domain") and if that fails assign the next unallocated domain id. - Changed the name of the function that creates the generic host bridge from pci_host_bridge_of_init to of_create_pci_host_bridge and exported as GPL symbol. v4 thread here: https://lkml.org/lkml/2014/3/3/301 v3 thread here: https://lkml.org/lkml/2014/2/28/216 v2 thread here: https://lkml.org/lkml/2014/2/27/245 v1 thread here: https://lkml.org/lkml/2014/2/3/380 Best regards, Liviu Liviu Dudau (7): pci: Introduce pci_register_io_range() helper function. pci: OF: Fix the conversion of IO ranges into IO resources. pci: Create pci_host_bridge before its associated bus in pci_create_root_bus. pci: Introduce a domain number for pci_host_bridge. pci: Use parent domain number when allocating child busses. pci: Export find_pci_host_bridge() function. pci: Add support for creating a generic host_bridge from device tree drivers/of/address.c | 39 +++++++++++++ drivers/pci/host-bridge.c | 142 ++++++++++++++++++++++++++++++++++++++++++++- drivers/pci/probe.c | 72 +++++++++++++++-------- include/linux/of_address.h | 14 +---- include/linux/pci.h | 17 ++++++ 5 files changed, 248 insertions(+), 36 deletions(-) -- 1.9.0

10 years, 3 months

[PATCH V1 Resend 0/3] CPUFreq: Minor cleanups for 3.15

by Viresh Kumar

Here are few minor cleanups for cpufreq core and drivers. The first two removes per-cpu cpufreq_show_table variable and moves that information in struct cpufreq_policy. And the last one removes unnecessary frozen variable/parameters. Just rebased over latest bleeding-edge branch and resent. Viresh Kumar (3): cpufreq: add 'freq_table' in struct cpufreq_policy cpufreq: Remove cpufreq_generic_exit() cpufreq: Remove unnecessary variable/parameter 'frozen' drivers/cpufreq/acpi-cpufreq.c | 1 - drivers/cpufreq/arm_big_little.c | 1 - drivers/cpufreq/blackfin-cpufreq.c | 1 - drivers/cpufreq/cpufreq-cpu0.c | 1 - drivers/cpufreq/cpufreq.c | 58 ++++++++++++++++------------------ drivers/cpufreq/cris-artpec3-cpufreq.c | 1 - drivers/cpufreq/cris-etraxfs-cpufreq.c | 1 - drivers/cpufreq/davinci-cpufreq.c | 1 - drivers/cpufreq/e_powersaver.c | 1 - drivers/cpufreq/elanfreq.c | 1 - drivers/cpufreq/exynos-cpufreq.c | 1 - drivers/cpufreq/exynos5440-cpufreq.c | 1 - drivers/cpufreq/freq_table.c | 46 +++++---------------------- drivers/cpufreq/ia64-acpi-cpufreq.c | 1 - drivers/cpufreq/imx6q-cpufreq.c | 1 - drivers/cpufreq/kirkwood-cpufreq.c | 1 - drivers/cpufreq/longhaul.c | 1 - drivers/cpufreq/loongson2_cpufreq.c | 1 - drivers/cpufreq/omap-cpufreq.c | 1 - drivers/cpufreq/p4-clockmod.c | 1 - drivers/cpufreq/pasemi-cpufreq.c | 1 - drivers/cpufreq/powernow-k6.c | 1 - drivers/cpufreq/powernow-k7.c | 2 -- drivers/cpufreq/powernow-k8.c | 2 -- drivers/cpufreq/ppc-corenet-cpufreq.c | 1 - drivers/cpufreq/ppc_cbe_cpufreq.c | 1 - drivers/cpufreq/pxa2xx-cpufreq.c | 1 - drivers/cpufreq/pxa3xx-cpufreq.c | 1 - drivers/cpufreq/sc520_freq.c | 1 - drivers/cpufreq/sh-cpufreq.c | 1 - drivers/cpufreq/sparc-us2e-cpufreq.c | 4 +-- drivers/cpufreq/sparc-us3-cpufreq.c | 4 +-- drivers/cpufreq/spear-cpufreq.c | 1 - drivers/cpufreq/speedstep-centrino.c | 2 -- drivers/cpufreq/speedstep-ich.c | 1 - drivers/cpufreq/speedstep-smi.c | 1 - drivers/cpufreq/tegra-cpufreq.c | 1 - include/linux/cpufreq.h | 11 +------ 38 files changed, 39 insertions(+), 120 deletions(-) -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

[PATCH 1/2] cpufreq: Return error if ->get() failed in cpufreq_update_policy()

by Viresh Kumar

cpufreq_update_policy() calls cpufreq_driver->get() to get current frequency of a CPU and it is not supposed to fail or return zero. Return error in case that happens. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> --- Pierre, I don't think this will fix the issue you were facing but might supress it :).. And so you need to understand what causes your ->get() to return zero. @Rafael: I got to these patches while looking at code recently after Pierre complained about. Came to this conclusion after having discussions with Srivatsa over IRC.. drivers/cpufreq/cpufreq.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 08ca8c9..383362b 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -2151,6 +2151,13 @@ int cpufreq_update_policy(unsigned int cpu) */ if (cpufreq_driver->get) { new_policy.cur = cpufreq_driver->get(cpu); + + if (!new_policy.cur) { + pr_err("%s: ->get() returned 0 KHz\n", __func__); + ret = -EINVAL; + goto no_policy; + } + if (!policy->cur) { pr_debug("Driver did not initialize current freq"); policy->cur = new_policy.cur; -- 1.7.12.rc2.18.g61b472e

10 years, 3 months

mainline boot: 47 pass, 0 fail (v3.14-rc6)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc6 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.3 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 51.4 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 2.7 sec legacy,3530beagle PASS: 0 min 41.3 sec omap4-panda PASS: 1 min 12.2 sec omap3-overo-tobi PASS: 0 min 22.8 sec am335x-bone PASS: 0 min 27.3 sec omap3-overo-storm-tobi PASS: 0 min 25.0 sec omap5-uevm PASS: 1 min 0.4 sec omap4-panda-es PASS: 1 min 11.7 sec legacy,3730storm PASS: 0 min 23.8 sec legacy,3530overo PASS: 0 min 21.2 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 48.2 sec sun7i-a20-cubieboard2 PASS: 0 min 14.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec imx6q-wandboard PASS: 0 min 17.1 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 15.2 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.0 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 12.5 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 18.2 sec tegra30-beaver PASS: 0 min 19.5 sec am335x-boneblack PASS: 0 min 23.2 sec omap3-beagle-xm PASS: 0 min 51.1 sec sun7i-a20-cubieboard2 PASS: 0 min 14.1 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 52.2 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.8 sec sun4i-a10-cubieboard PASS: 0 min 18.5 sec bcm28155-ap PASS: 0 min 58.9 sec omap3-overo-tobi PASS: 0 min 21.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 23.7 sec omap5-uevm PASS: 1 min 51.2 sec imx6q-wandboard PASS: 0 min 17.2 sec omap4-panda-es PASS: 0 min 52.3 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 30.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.1 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.5 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 22.0 sec armada-370-mirabox PASS: 0 min 20.0 sec

10 years, 3 months

mainline boot: 47 pass, 0 fail (v3.14-rc5-312-g1dc3217)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc5-312-g1dc3217 Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 54.5 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 0.9 sec legacy,3530beagle PASS: 0 min 34.4 sec omap4-panda PASS: 1 min 6.2 sec omap3-overo-tobi PASS: 0 min 22.8 sec am335x-bone PASS: 0 min 27.3 sec omap3-overo-storm-tobi PASS: 0 min 22.8 sec omap5-uevm PASS: 1 min 2.0 sec omap4-panda-es PASS: 1 min 12.8 sec legacy,3730storm PASS: 0 min 23.6 sec legacy,3530overo PASS: 0 min 21.1 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 51.0 sec sun7i-a20-cubieboard2 PASS: 0 min 14.1 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.3 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 17.0 sec msm_defconfig ------------- qcom-apq8074-dragonboard PASS: 1 min 4.1 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.8 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 PASS: 0 min 12.7 sec sun4i-a10-cubieboard PASS: 0 min 16.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.0 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 17.1 sec tegra30-beaver PASS: 0 min 17.0 sec am335x-boneblack PASS: 0 min 23.4 sec omap3-beagle-xm PASS: 0 min 46.4 sec sun7i-a20-cubieboard2 PASS: 0 min 14.2 sec armada-370-mirabox PASS: 0 min 22.0 sec omap4-panda PASS: 0 min 52.1 sec armada-xp-openblocks-ax3-4 PASS: 0 min 24.9 sec sun4i-a10-cubieboard PASS: 0 min 18.4 sec bcm28155-ap PASS: 1 min 14.7 sec omap3-overo-tobi PASS: 0 min 21.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.6 sec am335x-bone PASS: 0 min 26.0 sec omap3-overo-storm-tobi PASS: 0 min 24.0 sec omap5-uevm PASS: 1 min 48.8 sec imx6q-wandboard PASS: 0 min 17.2 sec omap4-panda-es PASS: 0 min 52.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.1 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.2 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox PASS: 0 min 20.0 sec

10 years, 3 months

misc boot: 37 pass, 7 fail (v3.14-rc4-694-g876189d7)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: misc Git describe: v3.14-rc4-694-g876189d7 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun4i-a10-cubieboard: FAIL: sunxi_defconfig ste-snowball: FAIL: multi_v7_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig da850-evm: FAIL: davinci_all_defconfig Full Report =========== da8xx_omapl_defconfig --------------------- da850-evm PASS: 0 min 15.2 sec omap2plus_defconfig ------------------- legacy,3730xm PASS: 0 min 51.5 sec am335x-boneblack PASS: 0 min 25.6 sec omap3-beagle-xm PASS: 1 min 1.5 sec legacy,3530beagle PASS: 0 min 39.0 sec omap4-panda PASS: 1 min 18.7 sec omap3-overo-tobi PASS: 0 min 23.0 sec am335x-bone PASS: 0 min 27.1 sec omap3-overo-storm-tobi PASS: 0 min 25.2 sec omap4-panda-es PASS: 1 min 7.7 sec legacy,3730storm PASS: 0 min 20.6 sec legacy,3530overo PASS: 0 min 21.1 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 19.6 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.0 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.3 sec imx6q-wandboard PASS: 0 min 16.9 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 17.6 sec sun4i-a10-cubieboard FAIL: 0 min 18.4 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec mvebu_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 PASS: 0 min 22.1 sec armada-370-mirabox PASS: 0 min 20.4 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.9 sec multi_v7_defconfig ------------------ ste-snowball FAIL: 0 min 33.5 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 47.8 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.4 sec omap4-panda PASS: 0 min 56.4 sec armada-xp-openblocks-ax3-4 PASS: 0 min 25.2 sec sun4i-a10-cubieboard FAIL: 0 min 19.6 sec bcm28155-ap PASS: 1 min 4.3 sec omap3-overo-tobi PASS: 0 min 21.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.7 sec am335x-bone PASS: 0 min 31.3 sec omap3-overo-storm-tobi PASS: 0 min 21.5 sec imx6q-wandboard PASS: 0 min 16.8 sec omap4-panda-es PASS: 0 min 56.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.1 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.2 sec davinci_all_defconfig --------------------- legacy,dm365evm PASS: 0 min 16.6 sec da850-evm FAIL: 0 min 20.6 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i# tftp 0x40008000 192.168.1.2:tmp/cubie2-53EzM1/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-53EzM1/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-53EzM1/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################## 2.7 MiB/s done Bytes transferred = 4544368 (455770 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-53EzM1/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-53EzM1/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-53EzM1/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x455770 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.57 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun7i# setenv ethaddr 22:71:81:DA:53:EA setenv ethaddr 22:71:81:DA:53:EA sun7i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun7i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun7i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun7i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun7i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun7i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun7i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.153 sun7i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun7i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun7i#tftp 0x40008000 192.168.1.2:tmp/cubie2-9dirwH/zImage tftp 0x40008000 192.168.1.2:tmp/cubie2-9dirwH/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-9dirwH/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1774400 (1b1340 hex) sun7i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun7i# tftp 0x41000000 192.168.1.2:tmp/cubie2-9dirwH/sun7i-a20-cubieboard2.dtb tftp 0x41000000 192.168.1.2:tmp/cubie2-9dirwH/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.153 Filename 'tmp/cubie2-9dirwH/sun7i-a20-cubieboard2.dtb'. Load address: 0x41000000 Loading: *## 2.5 MiB/s done Bytes transferred = 15599 (3cef hex) sun7i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.153:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun7i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b1340 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fffcee ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 17.58 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 sun4i# setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-6ZR3E6/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-6ZR3E6/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-6ZR3E6/zImage'. Load address: 0x40008000 Loading: *################################################################# ######################################################## 2.7 MiB/s done Bytes transferred = 1774400 (1b1340 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-6ZR3E6/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-6ZR3E6/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-6ZR3E6/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x1b1340 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 18.43 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ U8500 $ version version U-Boot 2009.11 (sept. 19 2011 - 17:03:11) U8500 $ setenv ethaddr 6e:e6:84:36:8e:9e setenv ethaddr 6e:e6:84:36:8e:9e Can't overwrite "ethaddr" U8500 $ setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 setenv bootargs console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 U8500 $ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' U8500 $ if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U8500 $ if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U8500 $ setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U8500 $ dhcp dhcp smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.159 U8500 $ setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U8500 $ if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U8500 $ tftp 0x00800000 192.168.1.2:tmp/snowball-64aDkY/tmpAto61M-uImage tftp 0x00800000 192.168.1.2:tmp/snowball-64aDkY/tmpAto61M-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 6e:e6:84:36:8e:9e Using smc911x-0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.159 Filename 'tmp/snowball-64aDkY/tmpAto61M-uImage'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################### done Bytes transferred = 4559889 (459411 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200n8 debug earlyprintk rw root=/dev/mmcblk0p3 rootwait rootfstype=ext4 ip=192.168.1.159:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none U8500 $ bootm 0x00800000 bootm 0x00800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4559825 Bytes = 4.3 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 33.49 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ setenv ethaddr 2e:40:70:f0:12:08 sun4i# setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sun4i# setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' sun4i# setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sun4i# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sun4i#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sun4i#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sun4i# dhcp dhcp ENET Speed is 100 Mbps - FULL duplex connection BOOTP broadcast 1 DHCP client bound to address 192.168.1.193 sun4i# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 sun4i# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi sun4i# tftp 0x40008000 192.168.1.2:tmp/cubie-Ez4Xy9/zImage tftp 0x40008000 192.168.1.2:tmp/cubie-Ez4Xy9/zImage Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Ez4Xy9/zImage'. Load address: 0x40008000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################ 2.7 MiB/s done Bytes transferred = 4518576 (44f2b0 hex) sun4i# tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x42000000 192.168.1.2:buildroot.cpio.gz.uboot Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x42000000 Loading: *############################################ 2.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) sun4i# tftp 0x41000000 192.168.1.2:tmp/cubie-Ez4Xy9/sun4i-a10-cubieboard.dtb tftp 0x41000000 192.168.1.2:tmp/cubie-Ez4Xy9/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 192.168.1.2; our IP address is 192.168.1.193 Filename 'tmp/cubie-Ez4Xy9/sun4i-a10-cubieboard.dtb'. Load address: 0x41000000 Loading: *# 2.4 MiB/s done Bytes transferred = 12602 (313a hex) sun4i# printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 ip=192.168.1.193:192.168.1.2:192.168.1.254:255.255.255.0::::192.168.1.254:none sun4i# bootz 0x40008000 0x42000000 0x41000000 bootz 0x40008000 0x42000000 0x41000000 Kernel image @ 0x40008000 [ 0x000000 - 0x44f2b0 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 41000000 Booting using the fdt blob at 0x41000000 Loading Device Tree to 40ff9000, end 40fff139 ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 19.55 seconds. # PYBOOT: Result: FAIL davinci_all_defconfig --------------------- da850-evm: FAIL: last 80 lines of boot log: ------------------------------------------- Err: serial SF: Detected M25P64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Net: DaVinci-EMAC Hit any key to stop autoboot: 3 0 U-Boot > U-Boot >version version U-Boot 2014.01-dirty (Feb 27 2014 - 15:12:48) arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.3-1ubuntu1) 4.7.3 GNU ld (GNU Binutils for Ubuntu) 2.23.52.20130913 U-Boot > setenv bootargs console=ttyS2,115200n8 debug earlyprintk setenv bootargs console=ttyS2,115200n8 debug earlyprintk U-Boot > if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot > if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot > setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot > dhcp dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.194 U-Boot > setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot > if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot > tftp 0xc0800000 192.168.1.2:tmp/da850evm-3J74ht/zImage tftp 0xc0800000 192.168.1.2:tmp/da850evm-3J74ht/zImage Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-3J74ht/zImage'. Load address: 0xc0800000 Loading: *################################################################# ################################################################# ############### 1.7 MiB/s done Bytes transferred = 2120928 (205ce0 hex) U-Boot > tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0xc0c00000 192.168.1.2:buildroot.cpio.gz.uboot Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'buildroot.cpio.gz.uboot'. Load address: 0xc0c00000 Loading: *############################################ 1.7 MiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot > tftp 0xc07f0000 192.168.1.2:tmp/da850evm-3J74ht/da850-evm.dtb tftp 0xc07f0000 192.168.1.2:tmp/da850evm-3J74ht/da850-evm.dtb Using DaVinci-EMAC device TFTP from server 192.168.1.2; our IP address is 192.168.1.194 Filename 'tmp/da850evm-3J74ht/da850-evm.dtb'. Load address: 0xc07f0000 Loading: *# 1.1 MiB/s done Bytes transferred = 6935 (1b17 hex) U-Boot > printenv bootargs printenv bootargs bootargs=console=ttyS2,115200n8 debug earlyprintk U-Boot > bootz 0xc0800000 0xc0c00000 0xc07f0000 bootz 0xc0800000 0xc0c00000 0xc07f0000 Kernel image @ 0xc0800000 [ 0x000000 - 0x205ce0 ] ## Loading init Ramdisk from Legacy Image at c0c00000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 20.62 seconds. # PYBOOT: Result: FAIL

10 years, 3 months

← Newer
1
...
14
15
16
17
18
19
20
...
23
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

linaro-kernel March 2014