Migrate dw_apb driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now.
This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED.
Cc: Jacob Pan jacob.jun.pan@linux.intel.com Cc: Jamie Iles jamie@jamieiles.com Signed-off-by: Viresh Kumar viresh.kumar@linaro.org --- drivers/clocksource/dw_apb_timer.c | 143 +++++++++++++++++++++---------------- 1 file changed, 81 insertions(+), 62 deletions(-)
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c index 35a88097af3c..97ba7cbc2cbd 100644 --- a/drivers/clocksource/dw_apb_timer.c +++ b/drivers/clocksource/dw_apb_timer.c @@ -110,71 +110,87 @@ static void apbt_enable_int(struct dw_apb_timer *timer) apbt_writel(timer, ctrl, APBTMR_N_CONTROL); }
-static void apbt_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static int apbt_shutdown(struct clock_event_device *evt) { + struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); unsigned long ctrl; - unsigned long period; + + pr_debug("%s CPU %d state=shutdown\n", __func__, + cpumask_first(evt->cpumask)); + + ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + return 0; +} + +static int apbt_set_oneshot(struct clock_event_device *evt) +{ struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); + unsigned long ctrl;
- pr_debug("%s CPU %d mode=%d\n", __func__, - cpumask_first(evt->cpumask), - mode); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - period = DIV_ROUND_UP(dw_ced->timer.freq, HZ); - ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); - ctrl |= APBTMR_CONTROL_MODE_PERIODIC; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - /* - * DW APB p. 46, have to disable timer before load counter, - * may cause sync problem. - */ - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - udelay(1); - pr_debug("Setting clock period %lu for HZ %d\n", period, HZ); - apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT); - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_ONESHOT: - ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); - /* - * set free running mode, this mode will let timer reload max - * timeout which will give time (3min on 25MHz clock) to rearm - * the next event, therefore emulate the one-shot mode. - */ - ctrl &= ~APBTMR_CONTROL_ENABLE; - ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; - - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - /* write again to set free running mode */ - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - - /* - * DW APB p. 46, load counter with all 1s before starting free - * running mode. - */ - apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT); - ctrl &= ~APBTMR_CONTROL_INT; - ctrl |= APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); - ctrl &= ~APBTMR_CONTROL_ENABLE; - apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); - break; - - case CLOCK_EVT_MODE_RESUME: - apbt_enable_int(&dw_ced->timer); - break; - } + pr_debug("%s CPU %d state=oneshot\n", __func__, + cpumask_first(evt->cpumask)); + + ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); + /* + * set free running mode, this mode will let timer reload max + * timeout which will give time (3min on 25MHz clock) to rearm + * the next event, therefore emulate the one-shot mode. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; + + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + /* write again to set free running mode */ + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + + /* + * DW APB p. 46, load counter with all 1s before starting free + * running mode. + */ + apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT); + ctrl &= ~APBTMR_CONTROL_INT; + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + return 0; +} + +static int apbt_set_periodic(struct clock_event_device *evt) +{ + struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); + unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ); + unsigned long ctrl; + + pr_debug("%s CPU %d state=periodic\n", __func__, + cpumask_first(evt->cpumask)); + + ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL); + ctrl |= APBTMR_CONTROL_MODE_PERIODIC; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + /* + * DW APB p. 46, have to disable timer before load counter, + * may cause sync problem. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + udelay(1); + pr_debug("Setting clock period %lu for HZ %d\n", period, HZ); + apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT); + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL); + return 0; +} + +static int apbt_resume(struct clock_event_device *evt) +{ + struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt); + + pr_debug("%s CPU %d state=resume\n", __func__, + cpumask_first(evt->cpumask)); + + apbt_enable_int(&dw_ced->timer); + return 0; }
static int apbt_next_event(unsigned long delta, @@ -233,7 +249,10 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating, dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced); dw_ced->ced.cpumask = cpumask_of(cpu); dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; - dw_ced->ced.set_mode = apbt_set_mode; + dw_ced->ced.set_state_shutdown = apbt_shutdown; + dw_ced->ced.set_state_periodic = apbt_set_periodic; + dw_ced->ced.set_state_oneshot = apbt_set_oneshot; + dw_ced->ced.tick_resume = apbt_resume; dw_ced->ced.set_next_event = apbt_next_event; dw_ced->ced.irq = dw_ced->timer.irq; dw_ced->ced.rating = rating;