Hi all,
In v4:
- Implemented kgdb_nmi serial driver, it provides 'nmi_console' KDB command. With the driver we can use our debugger port as a normal console, except that we can always get back to the debugger using the magic sequence. Note that I still somewhat reluctant to introduce software-raised interrupts, as they're arch-specific and not always possible. So today the driver uses a tasklet, it should be pretty cheap: we're checking for the input on timer interrupts, but we don't cause needless wakeups. The pro of this is that it works everywhere (but arches still have an option to optimize things, of course);
- Two new patches added to propagate init_poll() callbacks from tty to uart drivers. As a side-effect, a long-standing bug fixed in amba-pl1011 driver;
- Dropped patch 'Get rid of .LCcralign local label';
- Some more fixes in SVC return path. Now it seems rock-solid;
- The patches were rebased on the latest Linus' tree, and as usual can be found in the following repo:
git://git.infradead.org/users/cbou/linux-nmi-kdb.git master
Boilerplate:
These patches introduce KGDB FIQ debugger support. The idea (and some code, of course) comes from Google's FIQ debugger[2]. There are some differences (mostly implementation details, feature-wise they're almost equivalent, or can be made equivalent, if desired).
The FIQ debugger is a facility that can be used to debug situations when the kernel stuck in uninterruptable sections, e.g. the kernel infinitely loops or deadlocked in an interrupt or with interrupts disabled. On some development boards there is even a special NMI button, which is very useful for debugging weird kernel hangs.
And FIQ is basically an NMI, it has a higher priority than IRQs, and upon IRQ exception FIQs are not disabled. It is still possible to disable FIQs (as well as some "NMIs" on other architectures), but via special means.
So, here FIQs and NMIs are synonyms, but in the code I use NMI term for arch-independent code, and FIQs for ARM code.
A few years ago KDB wasn't yet ready for production, or even not well-known, so originally Google implemented its own FIQ debugger that included its own shell, ring-buffer, commands, dumping, backtracing logic and whatnot. This is very much like PowerPC's xmon (arch/powerpc/xmon), except that xmon was there for a decade, so it even predates KDB.
Anyway, nowadays KGDB/KDB is the cross-platform debugger, and the only feature that was missing is NMI handling. This is now fixed for ARM.
There are a few differences comparing to the original (Google's) FIQ debugger:
- Doing stuff in FIQ context is dangerous, as there we are not allowed to cause aborts or faults. In the original FIQ debugger there was a "signal" software-induced interrupt, upon exit from FIQ it would fire, and we would continue to execute "dangerous" commands from there.
In KGDB/KDB we don't use signal interrupts. We can do easier: set up a breakpoint, continue, and you'll trap into KGDB again in a safe context.
It works for most cases, but I can imagine cases when you can't set up a breakpoint. For these cases we'd better introduce a KDB command "exit_nmi", that will rise the SW IRQ, after which we're allowed to do anything.
- KGDB/KDB FIQ debugger shell is synchronous. In Google's version you could have a dedicated shell always running in the FIQ context, so when you type something on a serial line, you won't actually cause any debugging actions, FIQ would save the characters in its own buffer and continue execution normally. But when you hit return key after the command, then the command is executed.
In KGDB/KDB FIQ debugger it is different. Once you enter KGDB, the kernel will stop until you instruct it to continue.
This might look as a drastic change, but it is not. There is actually no difference whether you have sync or async shell, or at least I couldn't find any use-case where this would matter at all. Anyways, it is still possible to do async shell in KDB, just don't see any need for this.
- Original FIQ debugger used a custom FIQ vector handling code, w/ a lot of logic in it. In this approach I'm using the fact that FIQs are basically IRQs, except that we there are a bit more registers banked, and we can actually trap from the IRQ context.
But this all does not prevent us from using a simple jump-table based approach as used in the generic ARM entry code. So, here I just reuse the generic approach.
Note that I test the code on a modelled ARM machine (QEMU Versatile), so there might be some issues on a real HW, but it works in QEMU tho. :-)
Assuming you have QEMU >= 1.1.0, you can easily play with the code using ARM/versatile defconfig and command like this:
qemu-system-arm -nographic -machine versatilepb -kernel linux/arch/arm/boot/zImage -append "console=ttyAMA0 kgdboc=ttyAMA0 kgdb_fiq.enable=1"
Thanks,
-- arch/arm/Kconfig | 19 ++ arch/arm/common/vic.c | 28 +++ arch/arm/include/asm/hardware/vic.h | 2 + arch/arm/include/asm/kgdb.h | 8 + arch/arm/kernel/Makefile | 1 + arch/arm/kernel/entry-armv.S | 167 +---------------- arch/arm/kernel/entry-header.S | 170 ++++++++++++++++++ arch/arm/kernel/kgdb_fiq.c | 99 ++++++++++ arch/arm/kernel/kgdb_fiq_entry.S | 87 +++++++++ arch/arm/mach-versatile/Makefile | 1 + arch/arm/mach-versatile/kgdb_fiq.c | 31 ++++ drivers/tty/serial/Kconfig | 19 ++ drivers/tty/serial/Makefile | 1 + drivers/tty/serial/amba-pl011.c | 60 +++++-- drivers/tty/serial/kgdb_nmi.c | 348 ++++++++++++++++++++++++++++++++++++ drivers/tty/serial/kgdboc.c | 16 ++ drivers/tty/serial/serial_core.c | 30 ++++ include/linux/kdb.h | 29 +-- include/linux/kgdb.h | 34 ++++ include/linux/serial_core.h | 2 + include/linux/tty_driver.h | 1 + kernel/debug/debug_core.c | 36 +++- kernel/debug/kdb/kdb_main.c | 29 +++ 23 files changed, 1024 insertions(+), 194 deletions(-)
In v3:
- Per Colin Cross suggestion, added a way to release a debug console for normal use. This is done via 'disable_nmi' command (in the original FIQ debugger it was 'console' command). For this I added a new callback in the tty ops, and serial drivers have to provide a way to clear its interrupts. The patch 'tty/serial/kgdboc: Add and wire up clear_irqs callback' explains the concept in details. - Made the debug entry prompt more shell-like; - A new knocking mode '-1'. It disables the feature altogether, and thus makes it possible to hook KDB entry to a dedicated button. - The code was rebased on 'v3.5 + kdb kiosk'[1] patches;
In v2:
- Per Colin Cross' suggestion, we should not enter the debugger on any received byte (this might be a problem when there's a noise on the serial line). So there is now an additional patch that implements "knocking" to the KDB (either via $3#33 command or return key, this is configurable); - Reworked {enable,select}_fiq/is_fiq callbacks, now multi-mach kernels should not be a problem; - For versatile machines there are run-time checks for proper UART port (kernel will scream aloud if out of range port is specified); - Added some __init annotations; - Since not every architecture defines FIQ_START, we can't just blindly select CONFIG_FIQ symbol. So ARCH_MIGHT_HAVE_FIQ introduced; - Add !THUMB2_KERNEL dependency for KGDB_FIQ, we don't support Thumb2 kernels; - New patch that is used to get rid of LCcralign label in alignment_trap macro.
[1] https://lkml.org/lkml/2012/7/26/260 [2] Original Google's FIQ debugger, fiq_* files: http://android.git.linaro.org/gitweb?p=kernel/common.git%3Ba=tree%3Bf=arch/a... And board support as an example of using it: http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git%3Ba=commitdiff%3Bh=461cb8...