Tree/Branch: mainline Git describe: v3.15-rc3-41-g2aafe1a Failed boot tests (console logs at the end) =========================================== omap3-beagle-xm: FAIL: arm-multi_v7_defconfig sama5d35ek: FAIL: arm-sama5_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS
arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.3 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 55.6 sec: PASS am335x-boneblack 0 min 44.2 sec: PASS omap3-beagle-xm 1 min 0.6 sec: PASS legacy,3530beagle 0 min 34.0 sec: PASS (Warnings: 1) omap4-panda 1 min 8.5 sec: PASS omap3-overo-tobi 0 min 23.8 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 21.8 sec: PASS omap5-uevm 1 min 3.9 sec: PASS (Warnings: 1) omap3-n900 0 min 17.8 sec: PASS (Warnings: 1) legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 10.4 sec: PASS legacy,3730storm 0 min 20.3 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1)
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS
arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.3 sec: PASS ste-snowball 1 min 18.0 sec: PASS tegra30-beaver 0 min 20.2 sec: PASS am335x-boneblack 0 min 37.5 sec: PASS omap3-beagle-xm 1 min 15.1 sec: FAIL sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 56.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.3 sec: PASS sun4i-a10-cubieboard 0 min 15.0 sec: PASS bcm28155-ap 0 min 28.2 sec: PASS omap3-overo-tobi 0 min 25.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap5-uevm 1 min 39.5 sec: PASS (Warnings: 1) omap3-n900 0 min 16.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.8 sec: PASS omap4-panda-es 0 min 53.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.7 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.9 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 29.7 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 0 min 32.3 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 1 min 42.6 sec: FAIL
Console logs for failures =========================
arm-multi_v7_defconfig ----------------------
omap3-beagle-xm: FAIL: last 80 lines of boot log: -------------------------------------------------
USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found OMAP3 beagleboard.org #setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no OMAP3 beagleboard.org # dhcp dhcp ERROR: Need valid 'usbnet_devaddr' to be set at ether.c:2369/usb_eth_init() Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x88008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.190 OMAP3 beagleboard.org # setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 OMAP3 beagleboard.org #if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi OMAP3 beagleboard.org # tftp 0x81000000 192.168.1.2:tmp/3730xm-c0gYwP/zImage tftp 0x81000000 192.168.1.2:tmp/3730xm-c0gYwP/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-c0gYwP/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ########################################################### 434.6 KiB/s done Bytes transferred = 4682568 (477348 hex) OMAP3 beagleboard.org # tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *T ############################################ 109.4 KiB/s done Bytes transferred = 642602 (9ce2a hex) OMAP3 beagleboard.org # tftp 0x81f00000 192.168.1.2:tmp/3730xm-c0gYwP/omap3-beagle-xm.dtb tftp 0x81f00000 192.168.1.2:tmp/3730xm-c0gYwP/omap3-beagle-xm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.190 Filename 'tmp/3730xm-c0gYwP/omap3-beagle-xm.dtb'. Load address: 0x81f00000 Loading: *EHCI timed out on TD - token=0x88008d80 T ##### 11.7 KiB/s done Bytes transferred = 60981 (ee35 hex) OMAP3 beagleboard.org # printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 earlyprintk ip=192.168.1.190:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 OMAP3 beagleboard.org # bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Loading Ramdisk to 8ff63000, end 8ffffdea ... OK Loading Device Tree to 8ff51000, end 8ff62e34 ... OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 75.06 seconds. # PYBOOT: Result: FAIL
arm-sama5_defconfig -------------------
sama5d35ek: FAIL: last 80 lines of boot log: --------------------------------------------
UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 333:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 333:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read only 64 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 334:0, read 64 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f1a4>] (ubi_io_read_ec_hdr+0x44/0x1e8) [<c023f1a4>] (ubi_io_read_ec_hdr) from [<c02438e0>] (scan_all.constprop.8+0xb8/0x950) [<c02438e0>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>] (do_one_initcall) from [<c054bb18>] (kernel_init_freeable+0xe8/0x1b0) [<c054bb18>] (kernel_init_freeable) from [<c03ee210>] (kernel_init+0x8/0xec) [<c03ee210>] (kernel_init) from [<c000e478>] (ret_from_fork+0x14/0x3c) atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read only 2048 bytes, retry atmel_nand 60000000.nand: PMECC: Too many errors UBI error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 334:2048, read 2048 bytes CPU: 0 PID: 1 Comm: swapper Not tainted 3.15.0-rc3+ #1 [<c0012850>] (unwind_backtrace) from [<c001086c>] (show_stack+0x10/0x14) [<c001086c>] (show_stack) from [<c023eddc>] (ubi_io_read+0x124/0x2e8) [<c023eddc>] (ubi_io_read) from [<c023f390>] (ubi_io_read_vid_hdr+0x48/0x208) [<c023f390>] (ubi_io_read_vid_hdr) from [<c0243980>] (scan_all.constprop.8+0x158/0x950) [<c0243980>] (scan_all.constprop.8) from [<c024442c>] (ubi_attach+0x8c/0x144) [<c024442c>] (ubi_attach) from [<c0239e38>] (ubi_attach_mtd_dev+0x1e0/0x788) [<c0239e38>] (ubi_attach_mtd_dev) from [<c055fccc>] (ubi_init+0x1f0/0x2c0) [<c055fccc>] (ubi_init) from [<c0008844>] (do_one_initcall+0xe4/0x140) [<c0008844>]~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 102.63 seconds. # PYBOOT: Result: FAIL