Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue Git describe: v3.12.12-82-gda2d29bf Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: mvebu_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.0 sec omap3-beagle-xm PASS: 1 min 3.6 sec omap4-panda PASS: 1 min 7.4 sec omap3-tobi PASS: 0 min 25.1 sec am335x-bone PASS: 0 min 26.9 sec omap4-panda-es PASS: 1 min 5.1 sec
multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 PASS: 0 min 13.6 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 24.4 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec imx6q-wandboard PASS: 0 min 16.4 sec
bcm_defconfig ------------- bcm28155-ap PASS: 0 min 59.1 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec
multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 29.9 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 32.2 sec omap3-beagle-xm PASS: 0 min 54.6 sec sun7i-a20-cubieboard2 PASS: 0 min 13.7 sec armada-370-mirabox PASS: 0 min 20.4 sec omap4-panda FAIL: 0 min 31.5 sec armada-xp-openblocks-ax3-4 PASS: 0 min 22.6 sec sun4i-a10-cubieboard PASS: 0 min 13.5 sec bcm28155-ap PASS: 1 min 1.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.7 sec omap3-tobi PASS: 0 min 20.4 sec am335x-bone PASS: 0 min 39.0 sec imx6q-wandboard PASS: 0 min 15.9 sec omap4-panda-es PASS: 1 min 5.2 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.3 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 33.8 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox FAIL: 0 min 27.7 sec
Console logs for failures =========================
multi_v7_defconfig ------------------
omap4-panda: FAIL: last 80 lines of boot log: ---------------------------------------------
Connected to 4430panda console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(4430panda console)> hardreset (user:khilman) Reboot 4430panda Reboot: 4430panda ; phidget 0 1 : off, sleep, on
U-Boot SPL 2013.04 (May 24 2013 - 14:00:03) OMAP4430 ES2.1 Bypassing DPLL failed 4a008180 OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img
U-Boot 2013.04 (May 24 2013 - 14:00:03)
CPU : OMAP4430 ES2.1 Board: OMAP4 Panda I2C: ready D
~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.47 seconds. # PYBOOT: Result: FAIL
mvebu_defconfig ---------------
armada-370-mirabox: FAIL: last 80 lines of boot log: ----------------------------------------------------
phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version
U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>>setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>setenv initrd_high 0xffffffff
setenv initrd_high 0xffffffff
Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>>dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to addrsetenv serverip 192.168.1.2 ess 192.168.1.183 Marvell>> setenif test -n ${netargs}; then run netargs; fi v serverip if test -n ${netargs}; then run netargs; fi syntax error Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-o0pIpp/tmpfr6hOa-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-o0pIpp/tmpfr6hOa-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-o0pIpp/tmpfr6hOa-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653413 (287ce5 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 642602 (9ce2a hex) Marvell>> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-21 5:20:32 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653349 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2014-02-07 19:37:29 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.68 seconds. # PYBOOT: Result: FAIL