[TCWG CI] Regression caused by linux: btrfs: rework lzo_compress_pages() to make it subpage compatible

13 Oct 2021

[TCWG CI] Regression caused by linux: btrfs: rework lzo_compress_pages() to make it subpage compatible:
commit 0078783c7089fc83f0072066b23908120d7990e9
Author: Qu Wenruo wqu@suse.com
btrfs: rework lzo_compress_pages() to make it subpage compatible
Results regressed to
# reset_artifacts:
-10
# build_abe binutils:
-9
# build_abe stage1:
-5
# build_abe qemu:
-2
# linux_n_obj:
19814
# First few build errors in logs:
# 00:31:06 lzo.c:(.text+0x79c): undefined reference to `__aeabi_uldivmod'
# 00:31:06 arm-linux-gnueabihf-ld: lzo.c:(.text+0xb2c): undefined reference to `__aeabi_uldivmod'
# 00:31:06 arm-linux-gnueabihf-ld: lzo.c:(.text+0xb78): undefined reference to `__aeabi_uldivmod'
# 00:31:14 make: *** [vmlinux] Error 1
from
# reset_artifacts:
-10
# build_abe binutils:
-9
# build_abe stage1:
-5
# build_abe qemu:
-2
# linux_n_obj:
19899
# linux build successful:
all
THIS IS THE END OF INTERESTING STUFF.  BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT.
This commit has regressed these CI configurations:
 - tcwg_kernel/gnu-release-arm-next-allyesconfig
First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes...
Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes...
Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes...
Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes...
Reproduce builds:
<cut>
mkdir investigate-linux-0078783c7089fc83f0072066b23908120d7990e9
cd investigate-linux-0078783c7089fc83f0072066b23908120d7990e9
# Fetch scripts
git clone https://git.linaro.org/toolchain/jenkins-scripts
# Fetch manifests and test.sh script
mkdir -p artifacts/manifests
curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes... --fail
curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes... --fail
curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allyes... --fail
chmod +x artifacts/test.sh
# Reproduce the baseline build (build all pre-requisites)
./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh
# Save baseline build state (which is then restored in artifacts/test.sh)
mkdir -p ./bisect
rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /linux/ ./ ./bisect/baseline/
cd linux
# Reproduce first_bad build
git checkout --detach 0078783c7089fc83f0072066b23908120d7990e9
../artifacts/test.sh
# Reproduce last_good build
git checkout --detach d116c176e6e20f3ac111e7e6d1dd0e56d0e4eda7
../artifacts/test.sh
cd ..
</cut>
Full commit (up to 1000 lines):
<cut>
commit 0078783c7089fc83f0072066b23908120d7990e9
Author: Qu Wenruo wqu@suse.com
Date:   Mon Sep 27 15:22:04 2021 +0800
btrfs: rework lzo_compress_pages() to make it subpage compatible
There are several problems in lzo_compress_pages() preventing it from
    being subpage compatible:
- No page offset is calculated when reading from inode pages
      For subpage case, we could have @start which is not aligned to
      PAGE_SIZE.
Thus the destination where we read data from must take offset in page
      into consideration.
- The padding for segment header is bound to PAGE_SIZE
      This means, for subpage case we can skip several corners where on x86
      machines we need to add padding zeros.
The rework will:
- Update the comment to replace "page" with "sector"
- Introduce a new helper, copy_compressed_data_to_page(), to do the copy
      So that we don't need to bother page switches for both input and
      output.
Now in lzo_compress_pages() we only care about page switching for
      input, while in copy_compressed_data_to_page() we only care the page
      switching for output.
- Only one main cursor
      For lzo_compress_pages() we use @cur_in as main curor.
      It will be the file offset we are currently at.
All other helper variables will be only declared inside the loop.
For copy_compressed_data_to_page() it's similar, we will have
      @cur_out at the main cursor, which records how many bytes are in the
      output.
- Get rid of kmap()/kunmap()
      Instead of using __GFP_HIGHMEM and needs to do kmap()/kunmap(), just
      get rid of that GFP flag, so we can use page_address() and never
      bother the kmap()/kunmap() thing.
Signed-off-by: Qu Wenruo wqu@suse.com
    Signed-off-by: David Sterba dsterba@suse.com
---
 fs/btrfs/lzo.c | 270 ++++++++++++++++++++++++++++-----------------------------
 1 file changed, 134 insertions(+), 136 deletions(-)

diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
index c25dfd1a8a54..47003cec4046 100644
--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -32,19 +32,19 @@
  *     payload.
  *     One regular LZO compressed extent can have one or more segments.
  *     For inlined LZO compressed extent, only one segment is allowed.
- *     One segment represents at most one page of uncompressed data.
+ *     One segment represents at most one sector of uncompressed data.
  *
  * 2.1 Segment header
  *     Fixed size. LZO_LEN (4) bytes long, LE32.
  *     Records the total size of the segment (not including the header).
- *     Segment header never crosses page boundary, thus it's possible to
- *     have at most 3 padding zeros at the end of the page.
+ *     Segment header never crosses sector boundary, thus it's possible to
+ *     have at most 3 padding zeros at the end of the sector.
  *
  * 2.2 Data Payload
- *     Variable size. Size up limit should be lzo1x_worst_compress(PAGE_SIZE)
- *     which is 4419 for a 4KiB page.
+ *     Variable size. Size up limit should be lzo1x_worst_compress(sectorsize)
+ *     which is 4419 for a 4KiB sectorsize.
  *
- * Example:
+ * Example with 4K sectorsize:
  * Page 1:
  *          0     0x2   0x4   0x6   0x8   0xa   0xc   0xe     0x10
  * 0x0000   |  Header   | SegHdr 01 | Data payload 01 ...     |
@@ -112,163 +112,161 @@ static inline size_t read_compress_length(const char *buf)
    return le32_to_cpu(dlen);
 }
+/*
+ * Will do:
+ *
+ * - Write a segment header into the destination
+ * - Copy the compressed buffer into the destination
+ * - Make sure we have enough space in the last sector to fit a segment header
+ *   If not, we will pad at most (LZO_LEN (4)) - 1 bytes of zeros.
+ *
+ * Will allocate new pages when needed.
+ */
+static int copy_compressed_data_to_page(char *compressed_data,
+					size_t compressed_size,
+					struct page **out_pages,
+					u32 *cur_out,
+					const u32 sectorsize)
+{
+	u32 sector_bytes_left;
+	u32 orig_out;
+	struct page *cur_page;
+
+	/*
+	 * We never allow a segment header crossing sector boundary, previous
+	 * run should ensure we have enough space left inside the sector.
+	 */
+	ASSERT((*cur_out / sectorsize) ==
+	       (*cur_out + LZO_LEN - 1) / sectorsize);
+
+	cur_page = out_pages[*cur_out / PAGE_SIZE];
+	/* Allocate a new page */
+	if (!cur_page) {
+		cur_page = alloc_page(GFP_NOFS);
+		if (!cur_page)
+			return -ENOMEM;
+		out_pages[*cur_out / PAGE_SIZE] = cur_page;
+	}
+
+	write_compress_length(page_address(cur_page) + offset_in_page(*cur_out),
+			      compressed_size);
+	*cur_out += LZO_LEN;
+
+	orig_out = *cur_out;
+
+	/* Copy compressed data */
+	while (*cur_out - orig_out < compressed_size) {
+		u32 copy_len = min_t(u32, sectorsize - *cur_out % sectorsize,
+				     orig_out + compressed_size - *cur_out);
+
+		cur_page = out_pages[*cur_out / PAGE_SIZE];
+		/* Allocate a new page */
+		if (!cur_page) {
+			cur_page = alloc_page(GFP_NOFS);
+			if (!cur_page)
+				return -ENOMEM;
+			out_pages[*cur_out / PAGE_SIZE] = cur_page;
+		}
+
+		memcpy(page_address(cur_page) + offset_in_page(*cur_out),
+		       compressed_data + *cur_out - orig_out, copy_len);
+
+		*cur_out += copy_len;
+	}
+
+	/*
+	 * Check if we can fit the next segment header into the remaining space
+	 * of the sector.
+	 */
+	sector_bytes_left = round_up(*cur_out, sectorsize) - *cur_out;
+	if (sector_bytes_left >= LZO_LEN || sector_bytes_left == 0)
+		return 0;
+
+	/* The remaining size is not enough, pad it with zeros */
+	memset(page_address(cur_page) + offset_in_page(*cur_out), 0,
+	       sector_bytes_left);
+	*cur_out += sector_bytes_left;
+	return 0;
+}
+
 int lzo_compress_pages(struct list_head *ws, struct address_space *mapping,
    	u64 start, struct page **pages, unsigned long *out_pages,
    	unsigned long *total_in, unsigned long *total_out)
 {
    struct workspace *workspace = list_entry(ws, struct workspace, list);
+	const u32 sectorsize = btrfs_sb(mapping->host->i_sb)->sectorsize;
+	struct page *page_in = NULL;
    int ret = 0;
-	char *data_in;
-	char *cpage_out, *sizes_ptr;
-	int nr_pages = 0;
-	struct page *in_page = NULL;
-	struct page *out_page = NULL;
-	unsigned long bytes_left;
-	unsigned long len = *total_out;
-	unsigned long nr_dest_pages = *out_pages;
-	const unsigned long max_out = nr_dest_pages * PAGE_SIZE;
-	size_t in_len;
-	size_t out_len;
-	char *buf;
-	unsigned long tot_in = 0;
-	unsigned long tot_out = 0;
-	unsigned long pg_bytes_left;
-	unsigned long out_offset;
-	unsigned long bytes;
+	u64 cur_in = start;	/* Points to the file offset of input data */
+	u32 cur_out = 0;	/* Points to the current output byte */
+	u32 len = *total_out;
*out_pages = 0;
    *total_out = 0;
    *total_in = 0;
-	in_page = find_get_page(mapping, start >> PAGE_SHIFT);
-	data_in = page_address(in_page);
-
    /*
-	 * store the size of all chunks of compressed data in
-	 * the first 4 bytes
+	 * Skip the header for now, we will later come back and write the total
+	 * compressed size
     */
-	out_page = alloc_page(GFP_NOFS);
-	if (out_page == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	cpage_out = page_address(out_page);
-	out_offset = LZO_LEN;
-	tot_out = LZO_LEN;
-	pages[0] = out_page;
-	nr_pages = 1;
-	pg_bytes_left = PAGE_SIZE - LZO_LEN;
-
-	/* compress at most one page of data each time */
-	in_len = min(len, PAGE_SIZE);
-	while (tot_in < len) {
-		ret = lzo1x_1_compress(data_in, in_len, workspace->cbuf,
-				       &out_len, workspace->mem);
-		if (ret != LZO_E_OK) {
-			pr_debug("BTRFS: lzo in loop returned %d\n",
-			       ret);
+	cur_out += LZO_LEN;
+	while (cur_in < start + len) {
+		u32 sector_off = (cur_in - start) % sectorsize;
+		u32 in_len;
+		size_t out_len;
+
+		/* Get the input page first */
+		if (!page_in) {
+			page_in = find_get_page(mapping, cur_in >> PAGE_SHIFT);
+			ASSERT(page_in);
+		}
+
+		/* Compress at most one sector of data each time */
+		in_len = min_t(u32, start + len - cur_in,
+			       sectorsize - sector_off);
+		ASSERT(in_len);
+		ret = lzo1x_1_compress(page_address(page_in) +
+				       offset_in_page(cur_in), in_len,
+				       workspace->cbuf, &out_len,
+				       workspace->mem);
+		if (ret < 0) {
+			pr_debug("BTRFS: lzo in loop returned %d\n", ret);
    		ret = -EIO;
    		goto out;
    	}
-		/* store the size of this chunk of compressed data */
-		write_compress_length(cpage_out + out_offset, out_len);
-		tot_out += LZO_LEN;
-		out_offset += LZO_LEN;
-		pg_bytes_left -= LZO_LEN;
-
-		tot_in += in_len;
-		tot_out += out_len;
-
-		/* copy bytes from the working buffer into the pages */
-		buf = workspace->cbuf;
-		while (out_len) {
-			bytes = min_t(unsigned long, pg_bytes_left, out_len);
-
-			memcpy(cpage_out + out_offset, buf, bytes);
-
-			out_len -= bytes;
-			pg_bytes_left -= bytes;
-			buf += bytes;
-			out_offset += bytes;
-
-			/*
-			 * we need another page for writing out.
-			 *
-			 * Note if there's less than 4 bytes left, we just
-			 * skip to a new page.
-			 */
-			if ((out_len == 0 && pg_bytes_left < LZO_LEN) ||
-			    pg_bytes_left == 0) {
-				if (pg_bytes_left) {
-					memset(cpage_out + out_offset, 0,
-					       pg_bytes_left);
-					tot_out += pg_bytes_left;
-				}
-
-				/* we're done, don't allocate new page */
-				if (out_len == 0 && tot_in >= len)
-					break;
-
-				if (nr_pages == nr_dest_pages) {
-					out_page = NULL;
-					ret = -E2BIG;
-					goto out;
-				}
-
-				out_page = alloc_page(GFP_NOFS);
-				if (out_page == NULL) {
-					ret = -ENOMEM;
-					goto out;
-				}
-				cpage_out = page_address(out_page);
-				pages[nr_pages++] = out_page;
-
-				pg_bytes_left = PAGE_SIZE;
-				out_offset = 0;
-			}
-		}
+		ret = copy_compressed_data_to_page(workspace->cbuf, out_len,
+						   pages, &cur_out, sectorsize);
+		if (ret < 0)
+			goto out;
+
+		cur_in += in_len;
-		/* we're making it bigger, give up */
-		if (tot_in > 8192 && tot_in < tot_out) {
+		/*
+		 * Check if we're making it bigger after two sectors.
+		 * And if we're making it bigger, give up.
+		 */
+		if (cur_in - start > sectorsize * 2 &&
+		    cur_in - start < cur_out) {
    		ret = -E2BIG;
    		goto out;
    	}
-		/* we're all done */
-		if (tot_in >= len)
-			break;
-
-		if (tot_out > max_out)
-			break;
-
-		bytes_left = len - tot_in;
-		put_page(in_page);
-
-		start += PAGE_SIZE;
-		in_page = find_get_page(mapping, start >> PAGE_SHIFT);
-		data_in = page_address(in_page);
-		in_len = min(bytes_left, PAGE_SIZE);
-	}
-
-	if (tot_out >= tot_in) {
-		ret = -E2BIG;
-		goto out;
+		/* Check if we have reached page boundary */
+		if (IS_ALIGNED(cur_in, PAGE_SIZE)) {
+			put_page(page_in);
+			page_in = NULL;
+		}
    }
-	/* store the size of all chunks of compressed data */
-	sizes_ptr = page_address(pages[0]);
-	write_compress_length(sizes_ptr, tot_out);
+	/* Store the size of all chunks of compressed data */
+	write_compress_length(page_address(pages[0]), cur_out);
ret = 0;
-	*total_out = tot_out;
-	*total_in = tot_in;
+	*total_out = cur_out;
+	*total_in = cur_in - start;
 out:
-	*out_pages = nr_pages;
-
-	if (in_page)
-		put_page(in_page);
-
+	*out_pages = DIV_ROUND_UP(cur_out, PAGE_SIZE);
    return ret;
 }
</cut>

    

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

[TCWG CI] Regression caused by linux: btrfs: rework lzo_compress_pages() to make it subpage compatible