Add temperature alarm and thermal zone configuration to all three pm8150 instances. Configuration is largely based on the msm-4.19 tree. These alarms use main adc of the pmic. Separate temperature adc is not supported yet.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 41 +++++++++++++++++++++++-- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 43 +++++++++++++++++++++++++-- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 43 +++++++++++++++++++++++++-- 3 files changed, 119 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index c0b197458665..fee2db42f4cb 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -30,6 +30,15 @@ pwrkey { }; };
+ pm8150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + pm8150_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; @@ -38,8 +47,6 @@ pm8150_adc: adc@3100 { #io-channel-cells = <1>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; @@ -85,3 +92,33 @@ pmic@1 { #size-cells = <0>; }; }; + +&thermal_zones { + pm8150_temp { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8150_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "passive"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 40b5d75a4a1d..e93d16f2d1e0 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -22,7 +22,16 @@ power-on@800 { status = "disabled"; };
- adc@3100 { + pm8150b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150b_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +39,6 @@ adc@3100 { #io-channel-cells = <1>; interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; @@ -74,3 +81,33 @@ pmic@3 { #size-cells = <0>; }; }; + +&thermal_zones { + pm8150b_temp { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8150b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "passive"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index cf05e0685d10..1edf87c95a27 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -22,7 +22,16 @@ power-on@800 { status = "disabled"; };
- adc@3100 { + pm8150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150l_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +39,6 @@ adc@3100 { #io-channel-cells = <1>; interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
- status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; @@ -68,3 +75,33 @@ pmic@5 { #size-cells = <0>; }; }; + +&thermal_zones { + pm8150l_temp { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm8150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "passive"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + }; +};