This patchset provides a pseudo-NMI for arm64 kernels by reimplementing the irqflags macros to modify the GIC PMR (the priority mask register accessible as a system register on GICv3 and later) rather than the PSR. The patchset includes an implementation of arch_trigger_all_cpu_backtrace() for arm64 allowing the new code to be exercised.
The code works-for-me (tm) and is more "real" than the last time I shared these patches. However there remain a couple of limitations and caveats:
1. Requires GICv3+ hardware to be effective meaning it has mostly been tested using FVP. The alternatives runtime patching system is employed so systems with earlier GIC architectures are still bootable but will not benefit from NMI simulation.
2. FVP needs a bit of hacking to be able to run <SysRq-L> from an ISR. That's a shame because <SysRq-L> is a great way to observe an NMI preempting an IRQ handler. Testers are welcome to ping me offline and I will share the hacks I have been using to test with.
v3:
* Rebased on v4.8-rc2 * Restrict apply_alternatives_early() to consider only the capabilities needed for the kernel to function correctly (Will Deacon). * Added a bunch of notrace qualifiers (Will Deacon) * Used byte addressing to configure the interrupt priorities (Marc Zygnier) * Fixed implementation of interrupts_enabled() * Eliminated the over-zealous inclusion of <linux/irqchip/arm-gic-v3.h>. * Pushed a few symbol defintions towards the end of the patch series.
v2:
* Removed the isb instructions. The PMR is self-synchronizing so these are not needed (Dave Martin) * Use alternative runtime patching to allow the same kernel binary to boot systems with and without GICv3+ (Dave Martin). * Added code to properly distinguish between NMI and normal IRQ and to call into NMI handling code where needed. * Replaced the IPI backtrace logic with a newer version (from Russell King).
Daniel Thompson (7): irqchip: gic-v3: Reset BPR during initialization arm64: Add support for on-demand backtrace of other CPUs arm64: cpufeature: Allow early detect of specific features arm64: alternative: Apply alternatives early in boot process arm64: irqflags: Reorder the fiq & async macros arm64: irqflags: Use ICC sysregs to implement IRQ masking arm64: Implement IPI_CPU_BACKTRACE using pseudo-NMIs
arch/arm/include/asm/arch_gicv3.h | 6 ++ arch/arm64/Kconfig | 16 ++++ arch/arm64/include/asm/alternative.h | 1 + arch/arm64/include/asm/arch_gicv3.h | 57 +++++++++++++ arch/arm64/include/asm/assembler.h | 55 +++++++++++- arch/arm64/include/asm/hardirq.h | 2 +- arch/arm64/include/asm/irq.h | 3 + arch/arm64/include/asm/irqflags.h | 118 ++++++++++++++++++++++++-- arch/arm64/include/asm/ptrace.h | 23 +++++ arch/arm64/include/asm/smp.h | 2 + arch/arm64/kernel/alternative.c | 36 +++++++- arch/arm64/kernel/cpufeature.c | 92 +++++++++++--------- arch/arm64/kernel/entry.S | 151 +++++++++++++++++++++++++++------ arch/arm64/kernel/head.S | 35 ++++++++ arch/arm64/kernel/smp.c | 68 ++++++++++++++- arch/arm64/mm/proc.S | 23 +++++ drivers/irqchip/irq-gic-v3.c | 72 ++++++++++++++++ include/linux/irqchip/arm-gic-common.h | 8 ++ include/linux/irqchip/arm-gic.h | 5 -- lib/nmi_backtrace.c | 9 +- 20 files changed, 697 insertions(+), 85 deletions(-)
-- 2.7.4