November 2017 - Linux-stable-mirror

[Linux-stable-mirror] Patch "crypto: vmx - disable preemption to enable vsx in aes_ctr.c" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: vmx - disable preemption to enable vsx in aes_ctr.c to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Li Zhong <zhong(a)linux.vnet.ibm.com> Date: Fri, 20 Jan 2017 16:35:33 +0800 Subject: crypto: vmx - disable preemption to enable vsx in aes_ctr.c From: Li Zhong <zhong(a)linux.vnet.ibm.com> [ Upstream commit 7dede913fc2ab9c0d3bff3a49e26fa9e858b0c13 ] Some preemptible check warnings were reported from enable_kernel_vsx(). This patch disables preemption in aes_ctr.c before enabling vsx, and they are now consistent with other files in the same directory. Signed-off-by: Li Zhong <zhong(a)linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/vmx/aes_ctr.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -80,11 +80,13 @@ static int p8_aes_ctr_setkey(struct cryp int ret; struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + preempt_disable(); pagefault_disable(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); disable_kernel_vsx(); pagefault_enable(); + preempt_enable(); ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen); return ret; @@ -99,11 +101,13 @@ static void p8_aes_ctr_final(struct p8_a u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; + preempt_disable(); pagefault_disable(); enable_kernel_vsx(); aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key); disable_kernel_vsx(); pagefault_enable(); + preempt_enable(); crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); @@ -132,6 +136,7 @@ static int p8_aes_ctr_crypt(struct blkci blkcipher_walk_init(&walk, dst, src, nbytes); ret = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) { + preempt_disable(); pagefault_disable(); enable_kernel_vsx(); aes_p8_ctr32_encrypt_blocks(walk.src.virt.addr, @@ -143,6 +148,7 @@ static int p8_aes_ctr_crypt(struct blkci walk.iv); disable_kernel_vsx(); pagefault_enable(); + preempt_enable(); /* We need to update IV mostly for last bytes/round */ inc = (nbytes & AES_BLOCK_MASK) / AES_BLOCK_SIZE; Patches currently in stable-queue which might be from zhong(a)linux.vnet.ibm.com are queue-4.9/crypto-vmx-disable-preemption-to-enable-vsx-in-aes_ctr.c.patch queue-4.9/kvm-ppc-book-3s-xics-correct-the-real-mode-icp-rejecting-counter.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-samsung-exynos5433-add-ids-for-phyclk_mipidphy0_-clocks.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Marek Szyprowski <m.szyprowski(a)samsung.com> Date: Thu, 26 Jan 2017 13:37:52 +0100 Subject: clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks From: Marek Szyprowski <m.szyprowski(a)samsung.com> [ Upstream commit 5ccb58968bf7f46dbd128df88f71838a5a9750b8 ] Add missing identifiers for phyclk_mipidphy0_bitclkdiv8_phy and phyclk_mipidphy0_rxclkesc0_phy clocks. Access to those clocks is needed to setup initial clock configuration for display subsystem in device tree in order to avoid dependency on the configuration left by the bootloader. Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Acked-by: Krzysztof Kozlowski <krzk(a)kernel.org> Acked-by: Chanwoo Choi <cw00.choi(a)samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/samsung/clk-exynos5433.c | 6 ++++-- include/dt-bindings/clock/exynos5433.h | 5 ++++- 2 files changed, 8 insertions(+), 3 deletions(-) --- a/drivers/clk/samsung/clk-exynos5433.c +++ b/drivers/clk/samsung/clk-exynos5433.c @@ -2559,8 +2559,10 @@ static const struct samsung_fixed_rate_c FRATE(0, "phyclk_mipidphy1_bitclkdiv8_phy", NULL, 0, 188000000), FRATE(0, "phyclk_mipidphy1_rxclkesc0_phy", NULL, 0, 100000000), /* PHY clocks from MIPI_DPHY0 */ - FRATE(0, "phyclk_mipidphy0_bitclkdiv8_phy", NULL, 0, 188000000), - FRATE(0, "phyclk_mipidphy0_rxclkesc0_phy", NULL, 0, 100000000), + FRATE(CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY, "phyclk_mipidphy0_bitclkdiv8_phy", + NULL, 0, 188000000), + FRATE(CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY, "phyclk_mipidphy0_rxclkesc0_phy", + NULL, 0, 100000000), /* PHY clocks from HDMI_PHY */ FRATE(CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY, "phyclk_hdmiphy_tmds_clko_phy", NULL, 0, 300000000), --- a/include/dt-bindings/clock/exynos5433.h +++ b/include/dt-bindings/clock/exynos5433.h @@ -771,7 +771,10 @@ #define CLK_PCLK_DECON 113 -#define DISP_NR_CLK 114 +#define CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY 114 +#define CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY 115 + +#define DISP_NR_CLK 116 /* CMU_AUD */ #define CLK_MOUT_AUD_PLL_USER 1 Patches currently in stable-queue which might be from m.szyprowski(a)samsung.com are queue-4.9/clk-samsung-exynos5433-add-ids-for-phyclk_mipidphy0_-clocks.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "clk: mvebu: adjust AP806 CPU clock frequencies to production chip" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: mvebu: adjust AP806 CPU clock frequencies to production chip to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-mvebu-adjust-ap806-cpu-clock-frequencies-to-production-chip.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Date: Thu, 22 Dec 2016 13:08:14 +0100 Subject: clk: mvebu: adjust AP806 CPU clock frequencies to production chip From: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> [ Upstream commit 0c70ffc5f300e7c3a1a76ca0530860574afc890b ] This commit adjusts the list of possible "Sample At Reset" values that define the CPU clock frequency of the AP806 (part of Marvell Armada 7K/8K) to the values that have been validated with the production chip. Earlier values were preliminary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/mvebu/ap806-system-controller.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) --- a/drivers/clk/mvebu/ap806-system-controller.c +++ b/drivers/clk/mvebu/ap806-system-controller.c @@ -55,21 +55,39 @@ static int ap806_syscon_clk_probe(struct freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK; switch (freq_mode) { - case 0x0 ... 0x5: + case 0x0: + case 0x1: cpuclk_freq = 2000; break; - case 0x6 ... 0xB: + case 0x6: + case 0x7: cpuclk_freq = 1800; break; - case 0xC ... 0x11: + case 0x4: + case 0xB: + case 0xD: cpuclk_freq = 1600; break; - case 0x12 ... 0x16: + case 0x1a: cpuclk_freq = 1400; break; - case 0x17 ... 0x19: + case 0x14: + case 0x17: cpuclk_freq = 1300; break; + case 0x19: + cpuclk_freq = 1200; + break; + case 0x13: + case 0x1d: + cpuclk_freq = 1000; + break; + case 0x1c: + cpuclk_freq = 800; + break; + case 0x1b: + cpuclk_freq = 600; + break; default: dev_err(&pdev->dev, "invalid SAR value\n"); return -EINVAL; Patches currently in stable-queue which might be from thomas.petazzoni(a)free-electrons.com are queue-4.9/clk-mvebu-adjust-ap806-cpu-clock-frequencies-to-production-chip.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "brcmfmac: setup wiphy bands after registering it first" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled brcmfmac: setup wiphy bands after registering it first to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: brcmfmac-setup-wiphy-bands-after-registering-it-first.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Rafał Miłecki <rafal(a)milecki.pl> Date: Sat, 7 Jan 2017 21:36:05 +0100 Subject: brcmfmac: setup wiphy bands after registering it first From: Rafał Miłecki <rafal(a)milecki.pl> [ Upstream commit ab99063f873749b3c3b1e5d44038559883465e74 ] During bands setup we disable all channels that firmware doesn't support in the current regulatory setup. If we do this before wiphy_register it will result in copying set flags (including IEEE80211_CHAN_DISABLED) to the orig_flags which is supposed to be persistent. We don't want this as regulatory change may result in enabling some channels. We shouldn't mess with orig_flags then (by changing them or ignoring them) so it's better to just take care of their proper values. This patch cleanups code a bit (by taking orig_flags more seriously) and allows further improvements like disabling really unavailable channels. We will need that e.g. if some frequencies should be disabled for good due to hardware setup (design). Signed-off-by: Rafał Miłecki <rafal(a)milecki.pl> Acked-by: Arend van Spriel <arend.vanspriel(a)broadcom.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -6572,8 +6572,7 @@ static int brcmf_setup_wiphy(struct wiph wiphy->bands[NL80211_BAND_5GHZ] = band; } } - err = brcmf_setup_wiphybands(wiphy); - return err; + return 0; } static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) @@ -6938,6 +6937,12 @@ struct brcmf_cfg80211_info *brcmf_cfg802 goto priv_out; } + err = brcmf_setup_wiphybands(wiphy); + if (err) { + brcmf_err("Setting wiphy bands failed (%d)\n", err); + goto wiphy_unreg_out; + } + /* If cfg80211 didn't disable 40MHz HT CAP in wiphy_register(), * setup 40MHz in 2GHz band and enable OBSS scanning. */ Patches currently in stable-queue which might be from rafal(a)milecki.pl are queue-4.9/brcmfmac-setup-wiphy-bands-after-registering-it-first.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "ASoC: sunxi: Add bindings for sun8i to SPDIF" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: sunxi: Add bindings for sun8i to SPDIF to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-sunxi-add-bindings-for-sun8i-to-spdif.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Marcus Cooper <codekipper(a)gmail.com> Date: Thu, 19 Jan 2017 20:52:57 +0100 Subject: ASoC: sunxi: Add bindings for sun8i to SPDIF From: Marcus Cooper <codekipper(a)gmail.com> [ Upstream commit cb5c978f9a56c459d5f13901efcfe44b97c4182d ] The H3 SoC uses the same SPDIF block as found in earlier SoCs, but the transmit fifo is at a different address. Signed-off-by: Marcus Cooper <codekipper(a)gmail.com> Acked-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 1 + 1 file changed, 1 insertion(+) --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -10,6 +10,7 @@ Required properties: - compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC + - "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC - reg : Offset and length of the register set for the device. Patches currently in stable-queue which might be from codekipper(a)gmail.com are queue-4.9/asoc-sunxi-add-bindings-for-sun8i-to-spdif.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "arm64: dma-mapping: Only swizzle DMA ops for IOMMU_DOMAIN_DMA" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled arm64: dma-mapping: Only swizzle DMA ops for IOMMU_DOMAIN_DMA to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm64-dma-mapping-only-swizzle-dma-ops-for-iommu_domain_dma.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Will Deacon <will.deacon(a)arm.com> Date: Fri, 6 Jan 2017 10:49:12 +0000 Subject: arm64: dma-mapping: Only swizzle DMA ops for IOMMU_DOMAIN_DMA From: Will Deacon <will.deacon(a)arm.com> [ Upstream commit 4a8d8a14c0d08c2437cb80c05e88f6cc1ca3fb2c ] The arm64 DMA-mapping implementation sets the DMA ops to the IOMMU DMA ops if we detect that an IOMMU is present for the master and the DMA ranges are valid. In the case when the IOMMU domain for the device is not of type IOMMU_DOMAIN_DMA, then we have no business swizzling the ops, since we're not in control of the underlying address space. This patch leaves the DMA ops alone for masters attached to non-DMA IOMMU domains. Reviewed-by: Robin Murphy <robin.murphy(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm64/mm/dma-mapping.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -836,14 +836,21 @@ static bool do_iommu_attach(struct devic * then the IOMMU core will have already configured a group for this * device, and allocated the default domain for that group. */ - if (!domain || iommu_dma_init_domain(domain, dma_base, size, dev)) { - pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n", - dev_name(dev)); - return false; + if (!domain) + goto out_err; + + if (domain->type == IOMMU_DOMAIN_DMA) { + if (iommu_dma_init_domain(domain, dma_base, size, dev)) + goto out_err; + + dev->archdata.dma_ops = &iommu_dma_ops; } - dev->archdata.dma_ops = &iommu_dma_ops; return true; +out_err: + pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n", + dev_name(dev)); + return false; } static void queue_iommu_attach(struct device *dev, const struct iommu_ops *ops, Patches currently in stable-queue which might be from will.deacon(a)arm.com are queue-4.9/iommu-arm-smmu-v3-clear-prior-settings-when-updating-stes.patch queue-4.9/arm64-dma-mapping-only-swizzle-dma-ops-for-iommu_domain_dma.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Tony Lindgren <tony(a)atomide.com> Date: Fri, 20 Jan 2017 12:13:19 -0800 Subject: ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit 4cd6a59f5c1a9b0cca0da09fbba42b9450ffc899 ] We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -216,6 +216,7 @@ CONFIG_SERIO=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/arm-omap2plus_defconfig-fix-probe-errors-on-uarts-5-and-6.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: STiH410-family: fix wrong parent clock frequency" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: STiH410-family: fix wrong parent clock frequency to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-stih410-family-fix-wrong-parent-clock-frequency.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Patrice Chotard <patrice.chotard(a)st.com> Date: Fri, 6 Jan 2017 14:30:21 +0100 Subject: ARM: dts: STiH410-family: fix wrong parent clock frequency From: Patrice Chotard <patrice.chotard(a)st.com> [ Upstream commit b9ec866d223f38eb0bf2a7c836e10031ee17f7af ] The clock parent was lower than child clock which is not correct. In some use case, it leads to division by zero. Signed-off-by: Gabriel Fernandez <gabriel.fernandez(a)st.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/stih410.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -131,7 +131,7 @@ <&clk_s_d2_quadfs 0>; assigned-clock-rates = <297000000>, - <108000000>, + <297000000>, <0>, <400000000>, <400000000>; Patches currently in stable-queue which might be from patrice.chotard(a)st.com are queue-4.9/arm-dts-stih410-family-fix-wrong-parent-clock-frequency.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "ARM: dts: imx53-qsb-common: fix FEC pinmux config" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: imx53-qsb-common: fix FEC pinmux config to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: Patrick Bruenn <p.bruenn(a)beckhoff.com> Date: Wed, 25 Jan 2017 06:25:48 +0100 Subject: ARM: dts: imx53-qsb-common: fix FEC pinmux config From: Patrick Bruenn <p.bruenn(a)beckhoff.com> [ Upstream commit 8b649e426336d7d4800ff9c82858328f4215ba01 ] The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn(a)beckhoff.com> Signed-off-by: Shawn Guo <shawnguo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; }; Patches currently in stable-queue which might be from p.bruenn(a)beckhoff.com are queue-4.9/arm-dts-imx53-qsb-common-fix-fec-pinmux-config.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "apparmor: fix undefined reference to `aa_g_hash_policy'" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled apparmor: fix undefined reference to `aa_g_hash_policy' to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: apparmor-fix-undefined-reference-to-aa_g_hash_policy.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 09:48:01 CET 2017 From: John Johansen <john.johansen(a)canonical.com> Date: Mon, 16 Jan 2017 13:21:27 -0800 Subject: apparmor: fix undefined reference to `aa_g_hash_policy' From: John Johansen <john.johansen(a)canonical.com> [ Upstream commit 3ccb76c5dfe0d25c1d0168d5b726d0b43d19a485 ] The kernel build bot turned up a bad config combination when CONFIG_SECURITY_APPARMOR is y and CONFIG_SECURITY_APPARMOR_HASH is n, resulting in the build error security/built-in.o: In function `aa_unpack': (.text+0x841e2): undefined reference to `aa_g_hash_policy' Signed-off-by: John Johansen <john.johansen(a)canonical.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/apparmor/lsm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/security/apparmor/lsm.c +++ b/security/apparmor/lsm.c @@ -671,9 +671,9 @@ enum profile_mode aa_g_profile_mode = AP module_param_call(mode, param_set_mode, param_get_mode, &aa_g_profile_mode, S_IRUSR | S_IWUSR); -#ifdef CONFIG_SECURITY_APPARMOR_HASH /* whether policy verification hashing is enabled */ bool aa_g_hash_policy = IS_ENABLED(CONFIG_SECURITY_APPARMOR_HASH_DEFAULT); +#ifdef CONFIG_SECURITY_APPARMOR_HASH module_param_named(hash_policy, aa_g_hash_policy, aabool, S_IRUSR | S_IWUSR); #endif Patches currently in stable-queue which might be from john.johansen(a)canonical.com are queue-4.9/apparmor-fix-undefined-reference-to-aa_g_hash_policy.patch

7 years, 1 month

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2017