January 2018 - Linux-stable-mirror

[Linux-stable-mirror] Patch "kaiser: asm/tlbflush.h handle noPGE at lower level" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kaiser: asm/tlbflush.h handle noPGE at lower level to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kaiser-asm-tlbflush.h-handle-nopge-at-lower-level.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Jan 3 18:58:12 CET 2018 From: Hugh Dickins <hughd(a)google.com> Date: Sat, 4 Nov 2017 18:23:24 -0700 Subject: kaiser: asm/tlbflush.h handle noPGE at lower level From: Hugh Dickins <hughd(a)google.com> I found asm/tlbflush.h too twisty, and think it safer not to avoid __native_flush_tlb_global_irq_disabled() in the kaiser_enabled case, but instead let it handle kaiser_enabled along with cr3: it can just use __native_flush_tlb() for that, no harm in re-disabling preemption. (This is not the same change as Kirill and Dave have suggested for upstream, flipping PGE in cr4: that's neat, but needs a cpu_has_pge check; cr3 is enough for kaiser, and thought to be cheaper than cr4.) Also delete the X86_FEATURE_INVPCID invpcid_flush_all_nonglobals() preference from __native_flush_tlb(): unlike the invpcid_flush_all() preference in __native_flush_tlb_global(), it's not seen in upstream 4.14, and was recently reported to be surprisingly slow. Signed-off-by: Hugh Dickins <hughd(a)google.com> Acked-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/tlbflush.h | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -151,14 +151,6 @@ static inline void kaiser_flush_tlb_on_r static inline void __native_flush_tlb(void) { - if (this_cpu_has(X86_FEATURE_INVPCID)) { - /* - * Note, this works with CR4.PCIDE=0 or 1. - */ - invpcid_flush_all_nonglobals(); - return; - } - /* * If current->mm == NULL then we borrow a mm which may change during a * task switch and therefore we must not be preempted while we write CR3 @@ -182,11 +174,8 @@ static inline void __native_flush_tlb_gl /* restore PGE as it was before */ native_write_cr4(cr4); } else { - /* - * x86_64 microcode update comes this way when CR4.PGE is not - * enabled, and it's safer for all callers to allow this case. - */ - native_write_cr3(native_read_cr3()); + /* do it with cr3, letting kaiser flush user PCID */ + __native_flush_tlb(); } } @@ -194,12 +183,6 @@ static inline void __native_flush_tlb_gl { unsigned long flags; - if (kaiser_enabled) { - /* Globals are not used at all */ - __native_flush_tlb(); - return; - } - if (this_cpu_has(X86_FEATURE_INVPCID)) { /* * Using INVPCID is considerably faster than a pair of writes @@ -255,11 +238,7 @@ static inline void __native_flush_tlb_si static inline void __flush_tlb_all(void) { - if (cpu_has_pge) - __flush_tlb_global(); - else - __flush_tlb(); - + __flush_tlb_global(); /* * Note: if we somehow had PCID but not PGE, then this wouldn't work -- * we'd end up flushing kernel translations for the current ASID but Patches currently in stable-queue which might be from hughd(a)google.com are queue-4.4/kaiser-vmstat-show-nr_kaisertable-as-nr_overhead.patch queue-4.4/kaiser-add-nokaiser-boot-option-using-alternative.patch queue-4.4/kaiser-fix-unlikely-error-in-alloc_ldt_struct.patch queue-4.4/kaiser-_pgd_alloc-without-__gfp_repeat-to-avoid-stalls.patch queue-4.4/kaiser-kaiser_flush_tlb_on_return_to_user-check-pcid.patch queue-4.4/x86-paravirt-dont-patch-flush_tlb_single.patch queue-4.4/kaiser-merged-update.patch queue-4.4/kaiser-delete-kaiser_real_switch-option.patch queue-4.4/kaiser-kaiser_remove_mapping-move-along-the-pgd.patch queue-4.4/kaiser-fix-perf-crashes.patch queue-4.4/kaiser-drop-is_atomic-arg-to-kaiser_pagetable_walk.patch queue-4.4/kaiser-load_new_mm_cr3-let-switch_user_cr3-flush-user.patch queue-4.4/kaiser-enhanced-by-kernel-and-user-pcids.patch queue-4.4/kaiser-x86_cr3_pcid_noflush-and-x86_cr3_pcid_user.patch queue-4.4/kaiser-use-alternative-instead-of-x86_cr3_pcid_noflush.patch queue-4.4/kaiser-stack-map-page_size-at-thread_size-page_size.patch queue-4.4/kaiser-name-that-0x1000-kaiser_shadow_pgd_offset.patch queue-4.4/kaiser-fix-regs-to-do_nmi-ifndef-config_kaiser.patch queue-4.4/kaiser-do-not-set-_page_nx-on-pgd_none.patch queue-4.4/kaiser-tidied-up-asm-kaiser.h-somewhat.patch queue-4.4/kaiser-cleanups-while-trying-for-gold-link.patch queue-4.4/kaiser-tidied-up-kaiser_add-remove_mapping-slightly.patch queue-4.4/kaiser-fix-build-and-fixme-in-alloc_ldt_struct.patch queue-4.4/kaiser-kernel-address-isolation.patch queue-4.4/kaiser-enomem-if-kaiser_pagetable_walk-null.patch queue-4.4/kaiser-asm-tlbflush.h-handle-nopge-at-lower-level.patch queue-4.4/kaiser-paranoid_entry-pass-cr3-need-to-paranoid_exit.patch queue-4.4/kaiser-kaiser-depends-on-smp.patch queue-4.4/kaiser-pcid-0-for-kernel-and-128-for-user.patch

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] Patch "kaiser: add "nokaiser" boot option, using ALTERNATIVE" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kaiser: add "nokaiser" boot option, using ALTERNATIVE to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kaiser-add-nokaiser-boot-option-using-alternative.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Jan 3 18:58:12 CET 2018 From: Hugh Dickins <hughd(a)google.com> Date: Sun, 24 Sep 2017 16:59:49 -0700 Subject: kaiser: add "nokaiser" boot option, using ALTERNATIVE From: Hugh Dickins <hughd(a)google.com> Added "nokaiser" boot option: an early param like "noinvpcid". Most places now check int kaiser_enabled (#defined 0 when not CONFIG_KAISER) instead of #ifdef CONFIG_KAISER; but entry_64.S and entry_64_compat.S are using the ALTERNATIVE technique, which patches in the preferred instructions at runtime. That technique is tied to x86 cpu features, so X86_FEATURE_KAISER is fabricated. Prior to "nokaiser", Kaiser #defined _PAGE_GLOBAL 0: revert that, but be careful with both _PAGE_GLOBAL and CR4.PGE: setting them when nokaiser like when !CONFIG_KAISER, but not setting either when kaiser - neither matters on its own, but it's hard to be sure that _PAGE_GLOBAL won't get set in some obscure corner, or something add PGE into CR4. By omitting _PAGE_GLOBAL from __supported_pte_mask when kaiser_enabled, all page table setup which uses pte_pfn() masks it out of the ptes. It's slightly shameful that the same declaration versus definition of kaiser_enabled appears in not one, not two, but in three header files (asm/kaiser.h, asm/pgtable.h, asm/tlbflush.h). I felt safer that way, than with #including any of those in any of the others; and did not feel it worth an asm/kaiser_enabled.h - kernel/cpu/common.c includes them all, so we shall hear about it if they get out of synch. Cleanups while in the area: removed the silly #ifdef CONFIG_KAISER from kaiser.c; removed the unused native_get_normal_pgd(); removed the spurious reg clutter from SWITCH_*_CR3 macro stubs; corrected some comments. But more interestingly, set CR4.PSE in secondary_startup_64: the manual is clear that it does not matter whether it's 0 or 1 when 4-level-pts are enabled, but I was distracted to find cr4 different on BSP and auxiliaries - BSP alone was adding PSE, in probe_page_size_mask(). Signed-off-by: Hugh Dickins <hughd(a)google.com> Acked-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/kernel-parameters.txt | 2 + arch/x86/entry/entry_64.S | 15 +++++++------ arch/x86/include/asm/cpufeature.h | 3 ++ arch/x86/include/asm/kaiser.h | 27 +++++++++++++++++------- arch/x86/include/asm/pgtable.h | 20 ++++++++++++----- arch/x86/include/asm/pgtable_64.h | 13 +++-------- arch/x86/include/asm/pgtable_types.h | 4 --- arch/x86/include/asm/tlbflush.h | 39 ++++++++++++++++++++++------------- arch/x86/kernel/cpu/common.c | 28 ++++++++++++++++++++++++- arch/x86/kernel/espfix_64.c | 3 +- arch/x86/kernel/head_64.S | 4 +-- arch/x86/mm/init.c | 2 - arch/x86/mm/init_64.c | 10 ++++++++ arch/x86/mm/kaiser.c | 26 +++++++++++++++++++---- arch/x86/mm/pgtable.c | 8 +------ arch/x86/mm/tlb.c | 4 --- 16 files changed, 143 insertions(+), 65 deletions(-) --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2523,6 +2523,8 @@ bytes respectively. Such letter suffixes nojitter [IA-64] Disables jitter checking for ITC timers. + nokaiser [X86-64] Disable KAISER isolation of kernel from user. + no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -1051,7 +1051,7 @@ ENTRY(paranoid_entry) * unconditionally, but we need to find out whether the reverse * should be done on return (conveyed to paranoid_exit in %ebx). */ - movq %cr3, %rax + ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER testl $KAISER_SHADOW_PGD_OFFSET, %eax jz 2f orl $2, %ebx @@ -1083,6 +1083,7 @@ ENTRY(paranoid_exit) TRACE_IRQS_OFF_DEBUG TRACE_IRQS_IRETQ_DEBUG #ifdef CONFIG_KAISER + /* No ALTERNATIVE for X86_FEATURE_KAISER: paranoid_entry sets %ebx */ testl $2, %ebx /* SWITCH_USER_CR3 needed? */ jz paranoid_exit_no_switch SWITCH_USER_CR3 @@ -1315,13 +1316,14 @@ ENTRY(nmi) #ifdef CONFIG_KAISER /* Unconditionally use kernel CR3 for do_nmi() */ /* %rax is saved above, so OK to clobber here */ - movq %cr3, %rax + ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER /* If PCID enabled, NOFLUSH now and NOFLUSH on return */ orq x86_cr3_pcid_noflush, %rax pushq %rax /* mask off "user" bit of pgd address and 12 PCID bits: */ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax movq %rax, %cr3 +2: #endif call do_nmi @@ -1331,8 +1333,7 @@ ENTRY(nmi) * kernel code that needs user CR3, but do we ever return * to "user mode" where we need the kernel CR3? */ - popq %rax - mov %rax, %cr3 + ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_KAISER #endif /* @@ -1559,13 +1560,14 @@ end_repeat_nmi: #ifdef CONFIG_KAISER /* Unconditionally use kernel CR3 for do_nmi() */ /* %rax is saved above, so OK to clobber here */ - movq %cr3, %rax + ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER /* If PCID enabled, NOFLUSH now and NOFLUSH on return */ orq x86_cr3_pcid_noflush, %rax pushq %rax /* mask off "user" bit of pgd address and 12 PCID bits: */ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax movq %rax, %cr3 +2: #endif /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ @@ -1577,8 +1579,7 @@ end_repeat_nmi: * kernel code that needs user CR3, like just just before * a sysret. */ - popq %rax - mov %rax, %cr3 + ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_KAISER #endif testl %ebx, %ebx /* swapgs needed? */ --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -200,6 +200,9 @@ #define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */ #define X86_FEATURE_INTEL_PT ( 7*32+15) /* Intel Processor Trace */ +/* Because the ALTERNATIVE scheme is for members of the X86_FEATURE club... */ +#define X86_FEATURE_KAISER ( 7*32+31) /* CONFIG_KAISER w/o nokaiser */ + /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */ #define X86_FEATURE_VNMI ( 8*32+ 1) /* Intel Virtual NMI */ --- a/arch/x86/include/asm/kaiser.h +++ b/arch/x86/include/asm/kaiser.h @@ -46,28 +46,33 @@ movq \reg, %cr3 .endm .macro SWITCH_KERNEL_CR3 -pushq %rax +ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_KAISER _SWITCH_TO_KERNEL_CR3 %rax popq %rax +8: .endm .macro SWITCH_USER_CR3 -pushq %rax +ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_KAISER _SWITCH_TO_USER_CR3 %rax %al popq %rax +8: .endm .macro SWITCH_KERNEL_CR3_NO_STACK -movq %rax, PER_CPU_VAR(unsafe_stack_register_backup) +ALTERNATIVE "jmp 8f", \ + __stringify(movq %rax, PER_CPU_VAR(unsafe_stack_register_backup)), \ + X86_FEATURE_KAISER _SWITCH_TO_KERNEL_CR3 %rax movq PER_CPU_VAR(unsafe_stack_register_backup), %rax +8: .endm #else /* CONFIG_KAISER */ -.macro SWITCH_KERNEL_CR3 reg +.macro SWITCH_KERNEL_CR3 .endm -.macro SWITCH_USER_CR3 reg regb +.macro SWITCH_USER_CR3 .endm .macro SWITCH_KERNEL_CR3_NO_STACK .endm @@ -90,6 +95,16 @@ DECLARE_PER_CPU(unsigned long, x86_cr3_p extern char __per_cpu_user_mapped_start[], __per_cpu_user_mapped_end[]; +extern int kaiser_enabled; +#else +#define kaiser_enabled 0 +#endif /* CONFIG_KAISER */ + +/* + * Kaiser function prototypes are needed even when CONFIG_KAISER is not set, + * so as to build with tests on kaiser_enabled instead of #ifdefs. + */ + /** * kaiser_add_mapping - map a virtual memory part to the shadow (user) mapping * @addr: the start address of the range @@ -119,8 +134,6 @@ extern void kaiser_remove_mapping(unsign */ extern void kaiser_init(void); -#endif /* CONFIG_KAISER */ - #endif /* __ASSEMBLY */ #endif /* _ASM_X86_KAISER_H */ --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -18,6 +18,12 @@ #ifndef __ASSEMBLY__ #include <asm/x86_init.h> +#ifdef CONFIG_KAISER +extern int kaiser_enabled; +#else +#define kaiser_enabled 0 +#endif + void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd); void ptdump_walk_pgd_level_checkwx(void); @@ -660,7 +666,7 @@ static inline int pgd_bad(pgd_t pgd) * page table by accident; it will fault on the first * instruction it tries to run. See native_set_pgd(). */ - if (IS_ENABLED(CONFIG_KAISER)) + if (kaiser_enabled) ignore_flags |= _PAGE_NX; return (pgd_flags(pgd) & ~ignore_flags) != _KERNPG_TABLE; @@ -865,12 +871,14 @@ static inline void pmdp_set_wrprotect(st */ static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count) { - memcpy(dst, src, count * sizeof(pgd_t)); + memcpy(dst, src, count * sizeof(pgd_t)); #ifdef CONFIG_KAISER - /* Clone the shadow pgd part as well */ - memcpy(native_get_shadow_pgd(dst), - native_get_shadow_pgd(src), - count * sizeof(pgd_t)); + if (kaiser_enabled) { + /* Clone the shadow pgd part as well */ + memcpy(native_get_shadow_pgd(dst), + native_get_shadow_pgd(src), + count * sizeof(pgd_t)); + } #endif } --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -111,13 +111,12 @@ extern pgd_t kaiser_set_shadow_pgd(pgd_t static inline pgd_t *native_get_shadow_pgd(pgd_t *pgdp) { +#ifdef CONFIG_DEBUG_VM + /* linux/mmdebug.h may not have been included at this point */ + BUG_ON(!kaiser_enabled); +#endif return (pgd_t *)((unsigned long)pgdp | (unsigned long)PAGE_SIZE); } - -static inline pgd_t *native_get_normal_pgd(pgd_t *pgdp) -{ - return (pgd_t *)((unsigned long)pgdp & ~(unsigned long)PAGE_SIZE); -} #else static inline pgd_t kaiser_set_shadow_pgd(pgd_t *pgdp, pgd_t pgd) { @@ -128,10 +127,6 @@ static inline pgd_t *native_get_shadow_p BUILD_BUG_ON(1); return NULL; } -static inline pgd_t *native_get_normal_pgd(pgd_t *pgdp) -{ - return pgdp; -} #endif /* CONFIG_KAISER */ static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd) --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -39,11 +39,7 @@ #define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED) #define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY) #define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE) -#ifdef CONFIG_KAISER -#define _PAGE_GLOBAL (_AT(pteval_t, 0)) -#else #define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL) -#endif #define _PAGE_SOFTW1 (_AT(pteval_t, 1) << _PAGE_BIT_SOFTW1) #define _PAGE_SOFTW2 (_AT(pteval_t, 1) << _PAGE_BIT_SOFTW2) #define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT) --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -136,9 +136,11 @@ static inline void cr4_set_bits_and_upda * to avoid the need for asm/kaiser.h in unexpected places. */ #ifdef CONFIG_KAISER +extern int kaiser_enabled; extern void kaiser_setup_pcid(void); extern void kaiser_flush_tlb_on_return_to_user(void); #else +#define kaiser_enabled 0 static inline void kaiser_setup_pcid(void) { } @@ -163,7 +165,7 @@ static inline void __native_flush_tlb(vo * back: */ preempt_disable(); - if (this_cpu_has(X86_FEATURE_PCID)) + if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) kaiser_flush_tlb_on_return_to_user(); native_write_cr3(native_read_cr3()); preempt_enable(); @@ -174,20 +176,30 @@ static inline void __native_flush_tlb_gl unsigned long cr4; cr4 = this_cpu_read(cpu_tlbstate.cr4); - /* clear PGE */ - native_write_cr4(cr4 & ~X86_CR4_PGE); - /* write old PGE again and flush TLBs */ - native_write_cr4(cr4); + if (cr4 & X86_CR4_PGE) { + /* clear PGE and flush TLB of all entries */ + native_write_cr4(cr4 & ~X86_CR4_PGE); + /* restore PGE as it was before */ + native_write_cr4(cr4); + } else { + /* + * x86_64 microcode update comes this way when CR4.PGE is not + * enabled, and it's safer for all callers to allow this case. + */ + native_write_cr3(native_read_cr3()); + } } static inline void __native_flush_tlb_global(void) { -#ifdef CONFIG_KAISER - /* Globals are not used at all */ - __native_flush_tlb(); -#else unsigned long flags; + if (kaiser_enabled) { + /* Globals are not used at all */ + __native_flush_tlb(); + return; + } + if (this_cpu_has(X86_FEATURE_INVPCID)) { /* * Using INVPCID is considerably faster than a pair of writes @@ -207,7 +219,6 @@ static inline void __native_flush_tlb_gl raw_local_irq_save(flags); __native_flush_tlb_global_irq_disabled(); raw_local_irq_restore(flags); -#endif } static inline void __native_flush_tlb_single(unsigned long addr) @@ -222,7 +233,7 @@ static inline void __native_flush_tlb_si */ if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) { - if (this_cpu_has(X86_FEATURE_PCID)) + if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) kaiser_flush_tlb_on_return_to_user(); asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); return; @@ -237,9 +248,9 @@ static inline void __native_flush_tlb_si * Make sure to do only a single invpcid when KAISER is * disabled and we have only a single ASID. */ - if (X86_CR3_PCID_ASID_KERN != X86_CR3_PCID_ASID_USER) - invpcid_flush_one(X86_CR3_PCID_ASID_KERN, addr); - invpcid_flush_one(X86_CR3_PCID_ASID_USER, addr); + if (kaiser_enabled) + invpcid_flush_one(X86_CR3_PCID_ASID_USER, addr); + invpcid_flush_one(X86_CR3_PCID_ASID_KERN, addr); } static inline void __flush_tlb_all(void) --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -178,6 +178,20 @@ static int __init x86_pcid_setup(char *s return 1; } __setup("nopcid", x86_pcid_setup); + +static int __init x86_nokaiser_setup(char *s) +{ + /* nokaiser doesn't accept parameters */ + if (s) + return -EINVAL; +#ifdef CONFIG_KAISER + kaiser_enabled = 0; + setup_clear_cpu_cap(X86_FEATURE_KAISER); + pr_info("nokaiser: KAISER feature disabled\n"); +#endif + return 0; +} +early_param("nokaiser", x86_nokaiser_setup); #endif static int __init x86_noinvpcid_setup(char *s) @@ -324,7 +338,7 @@ static __always_inline void setup_smap(s static void setup_pcid(struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_PCID)) { - if (cpu_has(c, X86_FEATURE_PGE)) { + if (cpu_has(c, X86_FEATURE_PGE) || kaiser_enabled) { cr4_set_bits(X86_CR4_PCIDE); /* * INVPCID has two "groups" of types: @@ -747,6 +761,10 @@ void get_cpu_cap(struct cpuinfo_x86 *c) c->x86_power = cpuid_edx(0x80000007); init_scattered_cpuid_features(c); +#ifdef CONFIG_KAISER + if (kaiser_enabled) + set_cpu_cap(c, X86_FEATURE_KAISER); +#endif } static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c) @@ -1406,6 +1424,14 @@ void cpu_init(void) * try to read it. */ cr4_init_shadow(); + if (!kaiser_enabled) { + /* + * secondary_startup_64() deferred setting PGE in cr4: + * probe_page_size_mask() sets it on the boot cpu, + * but it needs to be set on each secondary cpu. + */ + cr4_set_bits(X86_CR4_PGE); + } /* * Load microcode on this cpu if a valid microcode is available. --- a/arch/x86/kernel/espfix_64.c +++ b/arch/x86/kernel/espfix_64.c @@ -132,9 +132,10 @@ void __init init_espfix_bsp(void) * area to ensure it is mapped into the shadow user page * tables. */ - if (IS_ENABLED(CONFIG_KAISER)) + if (kaiser_enabled) { set_pgd(native_get_shadow_pgd(pgd_p), __pgd(_KERNPG_TABLE | __pa((pud_t *)espfix_pud_page))); + } /* Randomize the locations */ init_espfix_random(); --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -183,8 +183,8 @@ ENTRY(secondary_startup_64) movq $(init_level4_pgt - __START_KERNEL_map), %rax 1: - /* Enable PAE mode and PGE */ - movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx + /* Enable PAE and PSE, but defer PGE until kaiser_enabled is decided */ + movl $(X86_CR4_PAE | X86_CR4_PSE), %ecx movq %rcx, %cr4 /* Setup early boot stage 4 level pagetables. */ --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -165,7 +165,7 @@ static void __init probe_page_size_mask( cr4_set_bits_and_update_boot(X86_CR4_PSE); /* Enable PGE if available */ - if (cpu_has_pge) { + if (cpu_has_pge && !kaiser_enabled) { cr4_set_bits_and_update_boot(X86_CR4_PGE); __supported_pte_mask |= _PAGE_GLOBAL; } else --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -395,6 +395,16 @@ void __init cleanup_highmap(void) continue; if (vaddr < (unsigned long) _text || vaddr > end) set_pmd(pmd, __pmd(0)); + else if (kaiser_enabled) { + /* + * level2_kernel_pgt is initialized with _PAGE_GLOBAL: + * clear that now. This is not important, so long as + * CR4.PGE remains clear, but it removes an anomaly. + * Physical mapping setup below avoids _PAGE_GLOBAL + * by use of massage_pgprot() inside pfn_pte() etc. + */ + set_pmd(pmd, pmd_clear_flags(*pmd, _PAGE_GLOBAL)); + } } } --- a/arch/x86/mm/kaiser.c +++ b/arch/x86/mm/kaiser.c @@ -17,7 +17,9 @@ #include <asm/pgalloc.h> #include <asm/desc.h> -#ifdef CONFIG_KAISER +int kaiser_enabled __read_mostly = 1; +EXPORT_SYMBOL(kaiser_enabled); /* for inlined TLB flush functions */ + __visible DEFINE_PER_CPU_USER_MAPPED(unsigned long, unsafe_stack_register_backup); @@ -168,8 +170,8 @@ static pte_t *kaiser_pagetable_walk(unsi return pte_offset_kernel(pmd, address); } -int kaiser_add_user_map(const void *__start_addr, unsigned long size, - unsigned long flags) +static int kaiser_add_user_map(const void *__start_addr, unsigned long size, + unsigned long flags) { int ret = 0; pte_t *pte; @@ -178,6 +180,15 @@ int kaiser_add_user_map(const void *__st unsigned long end_addr = PAGE_ALIGN(start_addr + size); unsigned long target_address; + /* + * It is convenient for callers to pass in __PAGE_KERNEL etc, + * and there is no actual harm from setting _PAGE_GLOBAL, so + * long as CR4.PGE is not set. But it is nonetheless troubling + * to see Kaiser itself setting _PAGE_GLOBAL (now that "nokaiser" + * requires that not to be #defined to 0): so mask it off here. + */ + flags &= ~_PAGE_GLOBAL; + for (; address < end_addr; address += PAGE_SIZE) { target_address = get_pa_from_mapping(address); if (target_address == -1) { @@ -264,6 +275,8 @@ void __init kaiser_init(void) { int cpu; + if (!kaiser_enabled) + return; kaiser_init_all_pgds(); for_each_possible_cpu(cpu) { @@ -312,6 +325,8 @@ void __init kaiser_init(void) /* Add a mapping to the shadow mapping, and synchronize the mappings */ int kaiser_add_mapping(unsigned long addr, unsigned long size, unsigned long flags) { + if (!kaiser_enabled) + return 0; return kaiser_add_user_map((const void *)addr, size, flags); } @@ -323,6 +338,8 @@ void kaiser_remove_mapping(unsigned long unsigned long addr, next; pgd_t *pgd; + if (!kaiser_enabled) + return; pgd = native_get_shadow_pgd(pgd_offset_k(start)); for (addr = start; addr < end; pgd++, addr = next) { next = pgd_addr_end(addr, end); @@ -344,6 +361,8 @@ static inline bool is_userspace_pgd(pgd_ pgd_t kaiser_set_shadow_pgd(pgd_t *pgdp, pgd_t pgd) { + if (!kaiser_enabled) + return pgd; /* * Do we need to also populate the shadow pgd? Check _PAGE_USER to * skip cases like kexec and EFI which make temporary low mappings. @@ -400,4 +419,3 @@ void kaiser_flush_tlb_on_return_to_user( X86_CR3_PCID_USER_FLUSH | KAISER_SHADOW_PGD_OFFSET); } EXPORT_SYMBOL(kaiser_flush_tlb_on_return_to_user); -#endif /* CONFIG_KAISER */ --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -341,16 +341,12 @@ static inline void _pgd_free(pgd_t *pgd) } #else -#ifdef CONFIG_KAISER /* - * Instead of one pmd, we aquire two pmds. Being order-1, it is + * Instead of one pgd, Kaiser acquires two pgds. Being order-1, it is * both 8k in size and 8k-aligned. That lets us just flip bit 12 * in a pointer to swap between the two 4k halves. */ -#define PGD_ALLOCATION_ORDER 1 -#else -#define PGD_ALLOCATION_ORDER 0 -#endif +#define PGD_ALLOCATION_ORDER kaiser_enabled static inline pgd_t *_pgd_alloc(void) { --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -39,8 +39,7 @@ static void load_new_mm_cr3(pgd_t *pgdir { unsigned long new_mm_cr3 = __pa(pgdir); -#ifdef CONFIG_KAISER - if (this_cpu_has(X86_FEATURE_PCID)) { + if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) { /* * We reuse the same PCID for different tasks, so we must * flush all the entries for the PCID out when we change tasks. @@ -57,7 +56,6 @@ static void load_new_mm_cr3(pgd_t *pgdir new_mm_cr3 |= X86_CR3_PCID_KERN_FLUSH; kaiser_flush_tlb_on_return_to_user(); } -#endif /* CONFIG_KAISER */ /* * Caution: many callers of this function expect Patches currently in stable-queue which might be from hughd(a)google.com are queue-4.4/kaiser-vmstat-show-nr_kaisertable-as-nr_overhead.patch queue-4.4/kaiser-add-nokaiser-boot-option-using-alternative.patch queue-4.4/kaiser-fix-unlikely-error-in-alloc_ldt_struct.patch queue-4.4/kaiser-_pgd_alloc-without-__gfp_repeat-to-avoid-stalls.patch queue-4.4/kaiser-kaiser_flush_tlb_on_return_to_user-check-pcid.patch queue-4.4/x86-paravirt-dont-patch-flush_tlb_single.patch queue-4.4/kaiser-merged-update.patch queue-4.4/kaiser-delete-kaiser_real_switch-option.patch queue-4.4/kaiser-kaiser_remove_mapping-move-along-the-pgd.patch queue-4.4/kaiser-fix-perf-crashes.patch queue-4.4/kaiser-drop-is_atomic-arg-to-kaiser_pagetable_walk.patch queue-4.4/kaiser-load_new_mm_cr3-let-switch_user_cr3-flush-user.patch queue-4.4/kaiser-enhanced-by-kernel-and-user-pcids.patch queue-4.4/kaiser-x86_cr3_pcid_noflush-and-x86_cr3_pcid_user.patch queue-4.4/kaiser-use-alternative-instead-of-x86_cr3_pcid_noflush.patch queue-4.4/kaiser-stack-map-page_size-at-thread_size-page_size.patch queue-4.4/kaiser-name-that-0x1000-kaiser_shadow_pgd_offset.patch queue-4.4/kaiser-fix-regs-to-do_nmi-ifndef-config_kaiser.patch queue-4.4/kaiser-do-not-set-_page_nx-on-pgd_none.patch queue-4.4/kaiser-tidied-up-asm-kaiser.h-somewhat.patch queue-4.4/kaiser-cleanups-while-trying-for-gold-link.patch queue-4.4/kaiser-tidied-up-kaiser_add-remove_mapping-slightly.patch queue-4.4/kaiser-fix-build-and-fixme-in-alloc_ldt_struct.patch queue-4.4/kaiser-kernel-address-isolation.patch queue-4.4/kaiser-enomem-if-kaiser_pagetable_walk-null.patch queue-4.4/kaiser-asm-tlbflush.h-handle-nopge-at-lower-level.patch queue-4.4/kaiser-paranoid_entry-pass-cr3-need-to-paranoid_exit.patch queue-4.4/kaiser-kaiser-depends-on-smp.patch queue-4.4/kaiser-pcid-0-for-kernel-and-128-for-user.patch

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] Patch "kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kaiser-_pgd_alloc-without-__gfp_repeat-to-avoid-stalls.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Jan 3 18:58:12 CET 2018 From: Hugh Dickins <hughd(a)google.com> Date: Fri, 13 Oct 2017 12:10:00 -0700 Subject: kaiser: _pgd_alloc() without __GFP_REPEAT to avoid stalls From: Hugh Dickins <hughd(a)google.com> Synthetic filesystem mempressure testing has shown softlockups, with hour-long page allocation stalls, and pgd_alloc() trying for order:1 with __GFP_REPEAT in one of the backtraces each time. That's _pgd_alloc() going for a Kaiser double-pgd, using the __GFP_REPEAT common to all page table allocations, but actually having no effect on order:0 (see should_alloc_oom() and should_continue_reclaim() in this tree, but beware that ports to another tree might behave differently). Order:1 stack allocation has been working satisfactorily without __GFP_REPEAT forever, and page table allocation only asks __GFP_REPEAT for awkward occasions in a long-running process: it's not appropriate at fork or exec time, and seems to be doing much more harm than good: getting those contiguous pages under very heavy mempressure can be hard (though even without it, Kaiser does generate more mempressure). Mask out that __GFP_REPEAT inside _pgd_alloc(). Why not take it out of the PGALLOG_GFP altogether, as v4.7 commit a3a9a59d2067 ("x86: get rid of superfluous __GFP_REPEAT") did? Because I think that might make a difference to our page table memcg charging, which I'd prefer not to interfere with at this time. hughd adds: __alloc_pages_slowpath() in the 4.4.89-stable tree handles __GFP_REPEAT a little differently than in prod kernel or 3.18.72-stable, so it may not always be exactly a no-op on order:0 pages, as said above; but I think still appropriate to omit it from Kaiser or non-Kaiser pgd. Signed-off-by: Hugh Dickins <hughd(a)google.com> Acked-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/mm/pgtable.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -6,7 +6,7 @@ #include <asm/fixmap.h> #include <asm/mtrr.h> -#define PGALLOC_GFP GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO +#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO) #ifdef CONFIG_HIGHPTE #define PGALLOC_USER_GFP __GFP_HIGHMEM @@ -354,7 +354,9 @@ static inline void _pgd_free(pgd_t *pgd) static inline pgd_t *_pgd_alloc(void) { - return (pgd_t *)__get_free_pages(PGALLOC_GFP, PGD_ALLOCATION_ORDER); + /* No __GFP_REPEAT: to avoid page allocation stalls in order-1 case */ + return (pgd_t *)__get_free_pages(PGALLOC_GFP & ~__GFP_REPEAT, + PGD_ALLOCATION_ORDER); } static inline void _pgd_free(pgd_t *pgd) Patches currently in stable-queue which might be from hughd(a)google.com are queue-4.4/kaiser-vmstat-show-nr_kaisertable-as-nr_overhead.patch queue-4.4/kaiser-add-nokaiser-boot-option-using-alternative.patch queue-4.4/kaiser-fix-unlikely-error-in-alloc_ldt_struct.patch queue-4.4/kaiser-_pgd_alloc-without-__gfp_repeat-to-avoid-stalls.patch queue-4.4/kaiser-kaiser_flush_tlb_on_return_to_user-check-pcid.patch queue-4.4/x86-paravirt-dont-patch-flush_tlb_single.patch queue-4.4/kaiser-merged-update.patch queue-4.4/kaiser-delete-kaiser_real_switch-option.patch queue-4.4/kaiser-kaiser_remove_mapping-move-along-the-pgd.patch queue-4.4/kaiser-fix-perf-crashes.patch queue-4.4/kaiser-drop-is_atomic-arg-to-kaiser_pagetable_walk.patch queue-4.4/kaiser-load_new_mm_cr3-let-switch_user_cr3-flush-user.patch queue-4.4/kaiser-enhanced-by-kernel-and-user-pcids.patch queue-4.4/kaiser-x86_cr3_pcid_noflush-and-x86_cr3_pcid_user.patch queue-4.4/kaiser-use-alternative-instead-of-x86_cr3_pcid_noflush.patch queue-4.4/kaiser-stack-map-page_size-at-thread_size-page_size.patch queue-4.4/kaiser-name-that-0x1000-kaiser_shadow_pgd_offset.patch queue-4.4/kaiser-fix-regs-to-do_nmi-ifndef-config_kaiser.patch queue-4.4/kaiser-do-not-set-_page_nx-on-pgd_none.patch queue-4.4/kaiser-tidied-up-asm-kaiser.h-somewhat.patch queue-4.4/kaiser-cleanups-while-trying-for-gold-link.patch queue-4.4/kaiser-tidied-up-kaiser_add-remove_mapping-slightly.patch queue-4.4/kaiser-fix-build-and-fixme-in-alloc_ldt_struct.patch queue-4.4/kaiser-kernel-address-isolation.patch queue-4.4/kaiser-enomem-if-kaiser_pagetable_walk-null.patch queue-4.4/kaiser-asm-tlbflush.h-handle-nopge-at-lower-level.patch queue-4.4/kaiser-paranoid_entry-pass-cr3-need-to-paranoid_exit.patch queue-4.4/kaiser-kaiser-depends-on-smp.patch queue-4.4/kaiser-pcid-0-for-kernel-and-128-for-user.patch

7 years, 2 months

1
0
0 0

Re: [Linux-stable-mirror] v3.18.86 build: 0 failures 1 warnings (v3.18.86)

by Greg KH

On Wed, Jan 03, 2018 at 03:41:21PM +0000, Mark Brown wrote: > On Wed, Jan 03, 2018 at 04:32:35PM +0100, Arnd Bergmann wrote: > > > It might be a problem with different 'make' versions, or something else > > in the environment that leads to "-Wno-frame-address" not being set > > on the command line instead. > > I'm using "GNU Make 4.1" - this is all just the default Debian stuff, > I've not customized my x86 host environment. Make 4.2.1 here with gcc 7.2.1 and I get tons of build warnings on my 3.18.y tree on my laptop, but my build machine running Fedora (make 4.2.1 and gcc 7.2.1) I get no build warnings at all. I've given up trying to track it down for my laptop, something is preventing the compiler flag from being added to the gcc command line, and I don't care anymore... thanks, greg k-h

7 years, 2 months

1
0
0 0

Re: [Linux-stable-mirror] [PATCH] IB/core: Fix two kernel warnings triggered by rxe registration

by Jason Gunthorpe

On Mon, Dec 25, 2017 at 12:28:39PM +0200, Leon Romanovsky wrote: > On Fri, Dec 22, 2017 at 01:38:52PM -0800, Bart Van Assche wrote: > > Avoid that the following two warnings are reported when registering an > > rxe device: > > > > WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core] > > CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2 > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 > > RIP: 0010:ib_register_device+0x591/0x640 [ib_core] > > Call Trace: > > rxe_register_device+0x3c6/0x470 [rdma_rxe] > > rxe_add+0x543/0x5e0 [rdma_rxe] > > rxe_net_add+0x37/0xb0 [rdma_rxe] > > rxe_param_set_add+0x5a/0x120 [rdma_rxe] > > param_attr_store+0x5e/0xc0 > > module_attr_store+0x19/0x30 > > sysfs_kf_write+0x3d/0x50 > > kernfs_fop_write+0x116/0x1a0 > > __vfs_write+0x23/0x120 > > vfs_write+0xbe/0x1b0 > > SyS_write+0x44/0xa0 > > entry_SYSCALL_64_fastpath+0x23/0x9a > > > > WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core] > > CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2 > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 > > RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core] > > Call Trace: > > ib_register_device+0x3f7/0x640 [ib_core] > > rxe_register_device+0x3c6/0x470 [rdma_rxe] > > rxe_add+0x543/0x5e0 [rdma_rxe] > > rxe_net_add+0x37/0xb0 [rdma_rxe] > > rxe_param_set_add+0x5a/0x120 [rdma_rxe] > > param_attr_store+0x5e/0xc0 > > module_attr_store+0x19/0x30 > > sysfs_kf_write+0x3d/0x50 > > kernfs_fop_write+0x116/0x1a0 > > __vfs_write+0x23/0x120 > > vfs_write+0xbe/0x1b0 > > SyS_write+0x44/0xa0 > > entry_SYSCALL_64_fastpath+0x23/0x9a > > > > Fixes: commit 99db9494035f ("IB/core: Remove ib_device.dma_device") > > ^^^^^^ redundant > > > Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> > > Cc: Leon Romanovsky <leon(a)kernel.org> > > Cc: stable(a)vger.kernel.org # v4.11 > > drivers/infiniband/core/device.c | 2 +- > > drivers/infiniband/core/sysfs.c | 1 - > > 2 files changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c > > index 30914f3baa5f..b9d7570e9989 100644 > > +++ b/drivers/infiniband/core/device.c > > @@ -446,7 +446,6 @@ int ib_register_device(struct ib_device *device, > > struct ib_udata uhw = {.outlen = 0, .inlen = 0}; > > struct device *parent = device->dev.parent; > > > > - WARN_ON_ONCE(!parent); > > WARN_ON_ONCE(device->dma_device); > > if (device->dev.dma_ops) { > > I understand that it fixed warning for you, but why is it correct? > You are using "parent" in this "if (device->dev.dma_ops)" too. If no parent is specified then the caller must provide a full set of DMA data and none should be copied from the parent. Presumably rxe does this, and has no parent because it is a virtual device. I'm a little more worried about the ib_device_register_sysfs - why was the WARN_ON ever there? What do you think about this as a clarification Bart? diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index bb2686d56d3c65..c535c7803d80a7 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -446,7 +446,6 @@ int ib_register_device(struct ib_device *device, struct ib_udata uhw = {.outlen = 0, .inlen = 0}; struct device *parent = device->dev.parent; - WARN_ON_ONCE(!parent); WARN_ON_ONCE(device->dma_device); if (device->dev.dma_ops) { /* @@ -455,16 +454,20 @@ int ib_register_device(struct ib_device *device, * into device->dev. */ device->dma_device = &device->dev; - if (!device->dev.dma_mask) - device->dev.dma_mask = parent->dma_mask; - if (!device->dev.coherent_dma_mask) - device->dev.coherent_dma_mask = - parent->coherent_dma_mask; + + if (parent) { + if (!device->dev.dma_mask) + device->dev.dma_mask = parent->dma_mask; + if (!device->dev.coherent_dma_mask) + device->dev.coherent_dma_mask = + parent->coherent_dma_mask; + } } else { /* * The caller did not provide custom DMA operations. Use the * DMA mapping operations of the parent device. */ + WARN_ON_ONCE(!parent); device->dma_device = parent; }

7 years, 2 months

2
1
0 0

[Linux-stable-mirror] [tip:efi/core] efi/capsule-loader: Reinstate virtual capsule mapping

by tip-bot for Ard Biesheuvel

Commit-ID: f24c4d478013d82bd1b943df566fff3561d52864 Gitweb: https://git.kernel.org/tip/f24c4d478013d82bd1b943df566fff3561d52864 Author: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> AuthorDate: Tue, 2 Jan 2018 17:21:10 +0000 Committer: Ingo Molnar <mingo(a)kernel.org> CommitDate: Wed, 3 Jan 2018 13:54:31 +0100 efi/capsule-loader: Reinstate virtual capsule mapping Commit: 82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header") ... refactored the capsule loading code that maps the capsule header, to avoid having to map it several times. However, as it turns out, the vmap() call we ended up removing did not just map the header, but the entire capsule image, and dropping this virtual mapping breaks capsules that are processed by the firmware immediately (i.e., without a reboot). Unfortunately, that change was part of a larger refactor that allowed a quirk to be implemented for Quark, which has a non-standard memory layout for capsules, and we have slightly painted ourselves into a corner by allowing quirk code to mangle the capsule header and memory layout. So we need to fix this without breaking Quark. Fortunately, Quark does not appear to care about the virtual mapping, and so we can simply do a partial revert of commit: 2a457fb31df6 ("efi/capsule-loader: Use page addresses rather than struct page pointers") ... and create a vmap() mapping of the entire capsule (including header) based on the reinstated struct page array, unless running on Quark, in which case we pass the capsule header copy as before. Reported-by: Ge Song <ge.song(a)hxt-semitech.com> Tested-by: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Tested-by: Ge Song <ge.song(a)hxt-semitech.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: <stable(a)vger.kernel.org> Cc: Dave Young <dyoung(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Matt Fleming <matt(a)codeblueprint.co.uk> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: linux-efi(a)vger.kernel.org Fixes: 82c3768b8d68 ("efi/capsule-loader: Use a cached copy of the capsule header") Link: http://lkml.kernel.org/r/20180102172110.17018-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> --- arch/x86/platform/efi/quirks.c | 13 +++++++++- drivers/firmware/efi/capsule-loader.c | 45 ++++++++++++++++++++++++++++------- include/linux/efi.h | 4 +++- 3 files changed, 52 insertions(+), 10 deletions(-) diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c index 8a99a2e..5b513cc 100644 --- a/arch/x86/platform/efi/quirks.c +++ b/arch/x86/platform/efi/quirks.c @@ -592,7 +592,18 @@ static int qrk_capsule_setup_info(struct capsule_info *cap_info, void **pkbuff, /* * Update the first page pointer to skip over the CSH header. */ - cap_info->pages[0] += csh->headersize; + cap_info->phys[0] += csh->headersize; + + /* + * cap_info->capsule should point at a virtual mapping of the entire + * capsule, starting at the capsule header. Our image has the Quark + * security header prepended, so we cannot rely on the default vmap() + * mapping created by the generic capsule code. + * Given that the Quark firmware does not appear to care about the + * virtual mapping, let's just point cap_info->capsule at our copy + * of the capsule header. + */ + cap_info->capsule = &cap_info->header; return 1; } diff --git a/drivers/firmware/efi/capsule-loader.c b/drivers/firmware/efi/capsule-loader.c index ec8ac5c..055e2e8 100644 --- a/drivers/firmware/efi/capsule-loader.c +++ b/drivers/firmware/efi/capsule-loader.c @@ -20,10 +20,6 @@ #define NO_FURTHER_WRITE_ACTION -1 -#ifndef phys_to_page -#define phys_to_page(x) pfn_to_page((x) >> PAGE_SHIFT) -#endif - /** * efi_free_all_buff_pages - free all previous allocated buffer pages * @cap_info: pointer to current instance of capsule_info structure @@ -35,7 +31,7 @@ static void efi_free_all_buff_pages(struct capsule_info *cap_info) { while (cap_info->index > 0) - __free_page(phys_to_page(cap_info->pages[--cap_info->index])); + __free_page(cap_info->pages[--cap_info->index]); cap_info->index = NO_FURTHER_WRITE_ACTION; } @@ -71,6 +67,14 @@ int __efi_capsule_setup_info(struct capsule_info *cap_info) cap_info->pages = temp_page; + temp_page = krealloc(cap_info->phys, + pages_needed * sizeof(phys_addr_t *), + GFP_KERNEL | __GFP_ZERO); + if (!temp_page) + return -ENOMEM; + + cap_info->phys = temp_page; + return 0; } @@ -105,9 +109,24 @@ int __weak efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff, **/ static ssize_t efi_capsule_submit_update(struct capsule_info *cap_info) { + bool do_vunmap = false; int ret; - ret = efi_capsule_update(&cap_info->header, cap_info->pages); + /* + * cap_info->capsule may have been assigned already by a quirk + * handler, so only overwrite it if it is NULL + */ + if (!cap_info->capsule) { + cap_info->capsule = vmap(cap_info->pages, cap_info->index, + VM_MAP, PAGE_KERNEL); + if (!cap_info->capsule) + return -ENOMEM; + do_vunmap = true; + } + + ret = efi_capsule_update(cap_info->capsule, cap_info->phys); + if (do_vunmap) + vunmap(cap_info->capsule); if (ret) { pr_err("capsule update failed\n"); return ret; @@ -165,10 +184,12 @@ static ssize_t efi_capsule_write(struct file *file, const char __user *buff, goto failed; } - cap_info->pages[cap_info->index++] = page_to_phys(page); + cap_info->pages[cap_info->index] = page; + cap_info->phys[cap_info->index] = page_to_phys(page); cap_info->page_bytes_remain = PAGE_SIZE; + cap_info->index++; } else { - page = phys_to_page(cap_info->pages[cap_info->index - 1]); + page = cap_info->pages[cap_info->index - 1]; } kbuff = kmap(page); @@ -252,6 +273,7 @@ static int efi_capsule_release(struct inode *inode, struct file *file) struct capsule_info *cap_info = file->private_data; kfree(cap_info->pages); + kfree(cap_info->phys); kfree(file->private_data); file->private_data = NULL; return 0; @@ -281,6 +303,13 @@ static int efi_capsule_open(struct inode *inode, struct file *file) return -ENOMEM; } + cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL); + if (!cap_info->phys) { + kfree(cap_info->pages); + kfree(cap_info); + return -ENOMEM; + } + file->private_data = cap_info; return 0; diff --git a/include/linux/efi.h b/include/linux/efi.h index d813f7b..29fdf80 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -140,11 +140,13 @@ struct efi_boot_memmap { struct capsule_info { efi_capsule_header_t header; + efi_capsule_header_t *capsule; int reset_type; long index; size_t count; size_t total_size; - phys_addr_t *pages; + struct page **pages; + phys_addr_t *phys; size_t page_bytes_remain; };

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] Applied "ASoC: skl: Fix kernel warning due to zero NHTL entry" to the asoc tree

by Mark Brown

The patch ASoC: skl: Fix kernel warning due to zero NHTL entry has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 20a1ea2222e7cbf96e9bf8579362e971491e6aea Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Wed, 3 Jan 2018 16:38:46 +0100 Subject: [PATCH] ASoC: skl: Fix kernel warning due to zero NHTL entry I got the following kernel warning when loading snd-soc-skl module on Dell Latitude 7270 laptop: memremap attempted on mixed range 0x0000000000000000 size: 0x0 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180 Call Trace: skl_nhlt_init+0x82/0xf0 [snd_soc_skl] skl_probe+0x2ee/0x7c0 [snd_soc_skl] .... It seems that the machine doesn't support the SKL DSP gives the empty NHLT entry, and it triggers the warning. For avoiding it, let do the zero check before calling memremap(). Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Mark Brown <broonie(a)kernel.org> --- sound/soc/intel/skylake/skl-nhlt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index d14c50a60289..1ce414d86d8a 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -43,7 +43,8 @@ struct nhlt_acpi_table *skl_nhlt_init(struct device *dev) obj = acpi_evaluate_dsm(handle, &osc_guid, 1, 1, NULL); if (obj && obj->type == ACPI_TYPE_BUFFER) { nhlt_ptr = (struct nhlt_resource_desc *)obj->buffer.pointer; - nhlt_table = (struct nhlt_acpi_table *) + if (nhlt_ptr->length) + nhlt_table = (struct nhlt_acpi_table *) memremap(nhlt_ptr->min_addr, nhlt_ptr->length, MEMREMAP_WB); ACPI_FREE(obj); -- 2.15.1

7 years, 2 months

1
0
0 0

Re: [Linux-stable-mirror] v3.18.86 build: 0 failures 1 warnings (v3.18.86)

by Arnd Bergmann

On Wed, Jan 3, 2018 at 3:59 PM, Mark Brown <broonie(a)kernel.org> wrote: > On Wed, Jan 03, 2018 at 03:52:12PM +0100, Arnd Bergmann wrote: > >> Greg and Mark, which x86-64 compiler versions do you use? > > gcc (Debian 6.3.0-18) 6.3.0 20170516 I installed that version here, same as my other gcc-6 versions, the "-Wno-frame-address" option gets set and interpreted correctly: $ git checkout v3.18.91 ; touch kernel/sched/core.c ; make V=1 defconfig kernel/sched/core.o CC=gcc-6 2>&1 | tail ... gcc-6 -Wp,-MD,kernel/sched/.core.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/6/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m64 -mno-80387 -mno-fp-ret-in-387 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -Wno-frame-address -fno-PIE -O2 --param=allow-store-data-races=0 -Wframe-larger-than=2048 -fno-stack-protector -Wno-unused-but-set-variable -Wno-unused-const-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-stack-check -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(core)" -D"KBUILD_MODNAME=KBUILD_STR(core)" -c -o kernel/sched/core.o kernel/sched/core.c It might be a problem with different 'make' versions, or something else in the environment that leads to "-Wno-frame-address" not being set on the command line instead. Arnd

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/boot: Add early cmdline parsing for options with arguments" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/boot: Add early cmdline parsing for options with arguments to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-boot-add-early-cmdline-parsing-for-options-with-arguments.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e505371dd83963caae1a37ead9524e8d997341be Mon Sep 17 00:00:00 2001 From: Tom Lendacky <thomas.lendacky(a)amd.com> Date: Mon, 17 Jul 2017 16:10:33 -0500 Subject: x86/boot: Add early cmdline parsing for options with arguments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Tom Lendacky <thomas.lendacky(a)amd.com> commit e505371dd83963caae1a37ead9524e8d997341be upstream. Add a cmdline_find_option() function to look for cmdline options that take arguments. The argument is returned in a supplied buffer and the argument length (regardless of whether it fits in the supplied buffer) is returned, with -1 indicating not found. Signed-off-by: Tom Lendacky <thomas.lendacky(a)amd.com> Reviewed-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Brijesh Singh <brijesh.singh(a)amd.com> Cc: Dave Young <dyoung(a)redhat.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Cc: Larry Woodman <lwoodman(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Matt Fleming <matt(a)codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst(a)redhat.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Rik van Riel <riel(a)redhat.com> Cc: Toshimitsu Kani <toshi.kani(a)hpe.com> Cc: kasan-dev(a)googlegroups.com Cc: kvm(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-efi(a)vger.kernel.org Cc: linux-mm(a)kvack.org Link: http://lkml.kernel.org/r/36b5f97492a9745dce27682305f990fc20e5cf8a.150031921… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/cmdline.h | 2 arch/x86/lib/cmdline.c | 105 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+) --- a/arch/x86/include/asm/cmdline.h +++ b/arch/x86/include/asm/cmdline.h @@ -2,5 +2,7 @@ #define _ASM_X86_CMDLINE_H int cmdline_find_option_bool(const char *cmdline_ptr, const char *option); +int cmdline_find_option(const char *cmdline_ptr, const char *option, + char *buffer, int bufsize); #endif /* _ASM_X86_CMDLINE_H */ --- a/arch/x86/lib/cmdline.c +++ b/arch/x86/lib/cmdline.c @@ -82,3 +82,108 @@ int cmdline_find_option_bool(const char return 0; /* Buffer overrun */ } + +/* + * Find a non-boolean option (i.e. option=argument). In accordance with + * standard Linux practice, if this option is repeated, this returns the + * last instance on the command line. + * + * @cmdline: the cmdline string + * @max_cmdline_size: the maximum size of cmdline + * @option: option string to look for + * @buffer: memory buffer to return the option argument + * @bufsize: size of the supplied memory buffer + * + * Returns the length of the argument (regardless of if it was + * truncated to fit in the buffer), or -1 on not found. + */ +static int +__cmdline_find_option(const char *cmdline, int max_cmdline_size, + const char *option, char *buffer, int bufsize) +{ + char c; + int pos = 0, len = -1; + const char *opptr = NULL; + char *bufptr = buffer; + enum { + st_wordstart = 0, /* Start of word/after whitespace */ + st_wordcmp, /* Comparing this word */ + st_wordskip, /* Miscompare, skip */ + st_bufcpy, /* Copying this to buffer */ + } state = st_wordstart; + + if (!cmdline) + return -1; /* No command line */ + + /* + * This 'pos' check ensures we do not overrun + * a non-NULL-terminated 'cmdline' + */ + while (pos++ < max_cmdline_size) { + c = *(char *)cmdline++; + if (!c) + break; + + switch (state) { + case st_wordstart: + if (myisspace(c)) + break; + + state = st_wordcmp; + opptr = option; + /* fall through */ + + case st_wordcmp: + if ((c == '=') && !*opptr) { + /* + * We matched all the way to the end of the + * option we were looking for, prepare to + * copy the argument. + */ + len = 0; + bufptr = buffer; + state = st_bufcpy; + break; + } else if (c == *opptr++) { + /* + * We are currently matching, so continue + * to the next character on the cmdline. + */ + break; + } + state = st_wordskip; + /* fall through */ + + case st_wordskip: + if (myisspace(c)) + state = st_wordstart; + break; + + case st_bufcpy: + if (myisspace(c)) { + state = st_wordstart; + } else { + /* + * Increment len, but don't overrun the + * supplied buffer and leave room for the + * NULL terminator. + */ + if (++len < bufsize) + *bufptr++ = c; + } + break; + } + } + + if (bufsize) + *bufptr = '\0'; + + return len; +} + +int cmdline_find_option(const char *cmdline, const char *option, char *buffer, + int bufsize) +{ + return __cmdline_find_option(cmdline, COMMAND_LINE_SIZE, option, + buffer, bufsize); +} Patches currently in stable-queue which might be from thomas.lendacky(a)amd.com are queue-4.4/x86-boot-add-early-cmdline-parsing-for-options-with-arguments.patch

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] Patch "x86/boot: Add early cmdline parsing for options with arguments" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/boot: Add early cmdline parsing for options with arguments to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-boot-add-early-cmdline-parsing-for-options-with-arguments.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e505371dd83963caae1a37ead9524e8d997341be Mon Sep 17 00:00:00 2001 From: Tom Lendacky <thomas.lendacky(a)amd.com> Date: Mon, 17 Jul 2017 16:10:33 -0500 Subject: x86/boot: Add early cmdline parsing for options with arguments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Tom Lendacky <thomas.lendacky(a)amd.com> commit e505371dd83963caae1a37ead9524e8d997341be upstream. Add a cmdline_find_option() function to look for cmdline options that take arguments. The argument is returned in a supplied buffer and the argument length (regardless of whether it fits in the supplied buffer) is returned, with -1 indicating not found. Signed-off-by: Tom Lendacky <thomas.lendacky(a)amd.com> Reviewed-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Brijesh Singh <brijesh.singh(a)amd.com> Cc: Dave Young <dyoung(a)redhat.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Cc: Larry Woodman <lwoodman(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Matt Fleming <matt(a)codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst(a)redhat.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Rik van Riel <riel(a)redhat.com> Cc: Toshimitsu Kani <toshi.kani(a)hpe.com> Cc: kasan-dev(a)googlegroups.com Cc: kvm(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-efi(a)vger.kernel.org Cc: linux-mm(a)kvack.org Link: http://lkml.kernel.org/r/36b5f97492a9745dce27682305f990fc20e5cf8a.150031921… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/cmdline.h | 2 arch/x86/lib/cmdline.c | 105 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+) --- a/arch/x86/include/asm/cmdline.h +++ b/arch/x86/include/asm/cmdline.h @@ -2,5 +2,7 @@ #define _ASM_X86_CMDLINE_H int cmdline_find_option_bool(const char *cmdline_ptr, const char *option); +int cmdline_find_option(const char *cmdline_ptr, const char *option, + char *buffer, int bufsize); #endif /* _ASM_X86_CMDLINE_H */ --- a/arch/x86/lib/cmdline.c +++ b/arch/x86/lib/cmdline.c @@ -104,7 +104,112 @@ __cmdline_find_option_bool(const char *c return 0; /* Buffer overrun */ } +/* + * Find a non-boolean option (i.e. option=argument). In accordance with + * standard Linux practice, if this option is repeated, this returns the + * last instance on the command line. + * + * @cmdline: the cmdline string + * @max_cmdline_size: the maximum size of cmdline + * @option: option string to look for + * @buffer: memory buffer to return the option argument + * @bufsize: size of the supplied memory buffer + * + * Returns the length of the argument (regardless of if it was + * truncated to fit in the buffer), or -1 on not found. + */ +static int +__cmdline_find_option(const char *cmdline, int max_cmdline_size, + const char *option, char *buffer, int bufsize) +{ + char c; + int pos = 0, len = -1; + const char *opptr = NULL; + char *bufptr = buffer; + enum { + st_wordstart = 0, /* Start of word/after whitespace */ + st_wordcmp, /* Comparing this word */ + st_wordskip, /* Miscompare, skip */ + st_bufcpy, /* Copying this to buffer */ + } state = st_wordstart; + + if (!cmdline) + return -1; /* No command line */ + + /* + * This 'pos' check ensures we do not overrun + * a non-NULL-terminated 'cmdline' + */ + while (pos++ < max_cmdline_size) { + c = *(char *)cmdline++; + if (!c) + break; + + switch (state) { + case st_wordstart: + if (myisspace(c)) + break; + + state = st_wordcmp; + opptr = option; + /* fall through */ + + case st_wordcmp: + if ((c == '=') && !*opptr) { + /* + * We matched all the way to the end of the + * option we were looking for, prepare to + * copy the argument. + */ + len = 0; + bufptr = buffer; + state = st_bufcpy; + break; + } else if (c == *opptr++) { + /* + * We are currently matching, so continue + * to the next character on the cmdline. + */ + break; + } + state = st_wordskip; + /* fall through */ + + case st_wordskip: + if (myisspace(c)) + state = st_wordstart; + break; + + case st_bufcpy: + if (myisspace(c)) { + state = st_wordstart; + } else { + /* + * Increment len, but don't overrun the + * supplied buffer and leave room for the + * NULL terminator. + */ + if (++len < bufsize) + *bufptr++ = c; + } + break; + } + } + + if (bufsize) + *bufptr = '\0'; + + return len; +} + int cmdline_find_option_bool(const char *cmdline, const char *option) { return __cmdline_find_option_bool(cmdline, COMMAND_LINE_SIZE, option); } + +int cmdline_find_option(const char *cmdline, const char *option, char *buffer, + int bufsize) +{ + return __cmdline_find_option(cmdline, COMMAND_LINE_SIZE, option, + buffer, bufsize); +} Patches currently in stable-queue which might be from thomas.lendacky(a)amd.com are queue-4.9/x86-boot-add-early-cmdline-parsing-for-options-with-arguments.patch

7 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2018