January 2018 - Linux-stable-mirror

[Linux-stable-mirror] Patch "x86/smpboot: Remove stale TLB flush invocations" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/smpboot: Remove stale TLB flush invocations to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-smpboot-remove-stale-tlb-flush-invocations.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 322f8b8b340c824aef891342b0f5795d15e11562 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx(a)linutronix.de> Date: Sat, 30 Dec 2017 22:13:53 +0100 Subject: x86/smpboot: Remove stale TLB flush invocations From: Thomas Gleixner <tglx(a)linutronix.de> commit 322f8b8b340c824aef891342b0f5795d15e11562 upstream. smpboot_setup_warm_reset_vector() and smpboot_restore_warm_reset_vector() invoke local_flush_tlb() for no obvious reason. Digging in history revealed that the original code in the 2.1 era added those because the code manipulated a swapper_pg_dir pagetable entry. The pagetable manipulation was removed long ago in the 2.3 timeframe, but the TLB flush invocations stayed around forever. Remove them along with the pointless pr_debug()s which come from the same 2.1 change. Reported-by: Dominik Brodowski <linux(a)dominikbrodowski.net> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Linus Torvalds <torvalds(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Link: http://lkml.kernel.org/r/20171230211829.586548655@linutronix.de Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/smpboot.c | 9 --------- 1 file changed, 9 deletions(-) --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -115,14 +115,10 @@ static inline void smpboot_setup_warm_re spin_lock_irqsave(&rtc_lock, flags); CMOS_WRITE(0xa, 0xf); spin_unlock_irqrestore(&rtc_lock, flags); - local_flush_tlb(); - pr_debug("1.\n"); *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) = start_eip >> 4; - pr_debug("2.\n"); *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = start_eip & 0xf; - pr_debug("3.\n"); } static inline void smpboot_restore_warm_reset_vector(void) @@ -130,11 +126,6 @@ static inline void smpboot_restore_warm_ unsigned long flags; /* - * Install writable page 0 entry to set BIOS data area. - */ - local_flush_tlb(); - - /* * Paranoid: Set warm reset code and vector here back * to default values. */ Patches currently in stable-queue which might be from tglx(a)linutronix.de are queue-4.9/nohz-prevent-a-timer-interrupt-storm-in-tick_nohz_stop_sched_tick.patch queue-4.9/timers-invoke-timer_start_debug-where-it-makes-sense.patch queue-4.9/x86-vm86-32-switch-to-flush_tlb_mm_range-in-mark_screen_rdonly.patch queue-4.9/x86-mm-add-the-nopcid-boot-option-to-turn-off-pcid.patch queue-4.9/x86-mm-enable-cr4.pcide-on-supported-systems.patch queue-4.9/sync-objtool-s-copy-of-x86-opcode-map.txt.patch queue-4.9/x86-smpboot-remove-stale-tlb-flush-invocations.patch queue-4.9/timers-use-deferrable-base-independent-of-base-nohz_active.patch queue-4.9/x86-mm-remove-the-up-asm-tlbflush.h-code-always-use-the-formerly-smp-code.patch queue-4.9/x86-mm-reimplement-flush_tlb_page-using-flush_tlb_mm_range.patch queue-4.9/x86-mm-make-flush_tlb_mm_range-more-predictable.patch queue-4.9/x86-mm-remove-flush_tlb-and-flush_tlb_current_task.patch queue-4.9/x86-mm-disable-pcid-on-32-bit-kernels.patch queue-4.9/timers-reinitialize-per-cpu-bases-on-hotplug.patch queue-4.9/x86-mm-64-fix-reboot-interaction-with-cr4.pcide.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-xhci-add-xhci_trust_tx_length-for-renesas-upd720201.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From da99706689481717998d1d48edd389f339eea979 Mon Sep 17 00:00:00 2001 From: Daniel Thompson <daniel.thompson(a)linaro.org> Date: Thu, 21 Dec 2017 15:06:15 +0200 Subject: usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 From: Daniel Thompson <daniel.thompson(a)linaro.org> commit da99706689481717998d1d48edd389f339eea979 upstream. When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Signed-off-by: Daniel Thompson <daniel.thompson(a)linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/host/xhci-pci.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -190,6 +190,9 @@ static void xhci_pci_quirks(struct devic xhci->quirks |= XHCI_BROKEN_STREAMS; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0014) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) xhci->quirks |= XHCI_RESET_ON_RESUME; if (pdev->vendor == PCI_VENDOR_ID_VIA) Patches currently in stable-queue which might be from daniel.thompson(a)linaro.org are queue-4.9/usb-xhci-add-xhci_trust_tx_length-for-renesas-upd720201.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: qcserial: add Sierra Wireless EM7565" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: qcserial: add Sierra Wireless EM7565 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-qcserial-add-sierra-wireless-em7565.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 92a18a657fb2e2ffbfa0659af32cc18fd2346516 Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer <rspmn(a)arcor.de> Date: Fri, 15 Dec 2017 00:39:27 +0100 Subject: USB: serial: qcserial: add Sierra Wireless EM7565 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Reinhard Speyerer <rspmn(a)arcor.de> commit 92a18a657fb2e2ffbfa0659af32cc18fd2346516 upstream. Sierra Wireless EM7565 devices use the QCSERIAL_SWI layout for their serial ports T: Bus=01 Lev=03 Prnt=29 Port=01 Cnt=02 Dev#= 31 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=9091 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM7565 Qualcomm Snapdragon X16 LTE-A S: SerialNumber=xxxxxxxx C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms but need sendsetup = true for the NMEA port to make it work properly. Simplify the patch compared to v1 as suggested by Bjørn Mork by taking advantage of the fact that existing devices work with sendsetup = true too. Use sendsetup = true for the NMEA interface of QCSERIAL_SWI and add DEVICE_SWI entries for the EM7565 PID 0x9091 and the EM7565 QDL PID 0x9090. Tests with several MC73xx/MC74xx/MC77xx devices have been performed in order to verify backward compatibility. Signed-off-by: Reinhard Speyerer <rspmn(a)arcor.de> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/qcserial.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -166,6 +166,8 @@ static const struct usb_device_id id_tab {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */ {DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */ {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */ + {DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */ + {DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */ {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ @@ -346,6 +348,7 @@ static int qcprobe(struct usb_serial *se break; case 2: dev_dbg(dev, "NMEA GPS interface found\n"); + sendsetup = true; break; case 3: dev_dbg(dev, "Modem port found\n"); Patches currently in stable-queue which might be from rspmn(a)arcor.de are queue-4.9/usb-serial-qcserial-add-sierra-wireless-em7565.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: option: adding support for YUGA CLM920-NC5" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: adding support for YUGA CLM920-NC5 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-option-adding-support-for-yuga-clm920-nc5.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3920bb713038810f25770e7545b79f204685c8f2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?SZ=20Lin=20=28=E6=9E=97=E4=B8=8A=E6=99=BA=29?= <sz.lin(a)moxa.com> Date: Tue, 19 Dec 2017 17:40:32 +0800 Subject: USB: serial: option: adding support for YUGA CLM920-NC5 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: SZ Lin (林上智) <sz.lin(a)moxa.com> commit 3920bb713038810f25770e7545b79f204685c8f2 upstream. This patch adds support for YUGA CLM920-NC5 PID 0x9625 USB modem to option driver. Interface layout: 0: QCDM/DIAG 1: ADB 2: MODEM 3: AT 4: RMNET Signed-off-by: Taiyi Wu <taiyity.wu(a)moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin(a)moxa.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/option.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -236,6 +236,8 @@ static void option_instat_callback(struc /* These Quectel products use Qualcomm's vendor ID */ #define QUECTEL_PRODUCT_UC20 0x9003 #define QUECTEL_PRODUCT_UC15 0x9090 +/* These Yuga products use Qualcomm's vendor ID */ +#define YUGA_PRODUCT_CLM920_NC5 0x9625 #define QUECTEL_VENDOR_ID 0x2c7c /* These Quectel products use Quectel's vendor ID */ @@ -683,6 +685,10 @@ static const struct option_blacklist_inf .reserved = BIT(4) | BIT(5), }; +static const struct option_blacklist_info yuga_clm920_nc5_blacklist = { + .reserved = BIT(1) | BIT(4), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1187,6 +1193,9 @@ static const struct usb_device_id option { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + /* Yuga products use Qualcomm vendor ID */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5), + .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, Patches currently in stable-queue which might be from sz.lin(a)moxa.com are queue-4.9/usb-serial-option-adding-support-for-yuga-clm920-nc5.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: option: add support for Telit ME910 PID 0x1101" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: add support for Telit ME910 PID 0x1101 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-option-add-support-for-telit-me910-pid-0x1101.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 08933099e6404f588f81c2050bfec7313e06eeaf Mon Sep 17 00:00:00 2001 From: Daniele Palmas <dnlplm(a)gmail.com> Date: Thu, 14 Dec 2017 16:54:45 +0100 Subject: USB: serial: option: add support for Telit ME910 PID 0x1101 From: Daniele Palmas <dnlplm(a)gmail.com> commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream. This patch adds support for PID 0x1101 of Telit ME910. Signed-off-by: Daniele Palmas <dnlplm(a)gmail.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -283,6 +283,7 @@ static void option_instat_callback(struc #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 #define TELIT_PRODUCT_ME910 0x1100 +#define TELIT_PRODUCT_ME910_DUAL_MODEM 0x1101 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 @@ -648,6 +649,11 @@ static const struct option_blacklist_inf .reserved = BIT(1) | BIT(3), }; +static const struct option_blacklist_info telit_me910_dual_modem_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(3), +}; + static const struct option_blacklist_info telit_le910_blacklist = { .sendsetup = BIT(0), .reserved = BIT(1) | BIT(2), @@ -1247,6 +1253,8 @@ static const struct usb_device_id option .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = (kernel_ulong_t)&telit_me910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), + .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), Patches currently in stable-queue which might be from dnlplm(a)gmail.com are queue-4.9/usb-serial-option-add-support-for-telit-me910-pid-0x1101.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: serial: ftdi_sio: add id for Airbus DS P8GR" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: ftdi_sio: add id for Airbus DS P8GR to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-ftdi_sio-add-id-for-airbus-ds-p8gr.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c6a36ad383559a60a249aa6016cebf3cb8b6c485 Mon Sep 17 00:00:00 2001 From: Max Schulze <max.schulze(a)posteo.de> Date: Wed, 20 Dec 2017 20:47:44 +0100 Subject: USB: serial: ftdi_sio: add id for Airbus DS P8GR From: Max Schulze <max.schulze(a)posteo.de> commit c6a36ad383559a60a249aa6016cebf3cb8b6c485 upstream. Add AIRBUS_DS_P8GR device IDs to ftdi_sio driver. Signed-off-by: Max Schulze <max.schulze(a)posteo.de> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1017,6 +1017,7 @@ static const struct usb_device_id id_tab .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) }, { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) }, + { USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) }, { } /* Terminating entry */ }; --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -914,6 +914,12 @@ #define ICPDAS_I7563U_PID 0x0105 /* + * Airbus Defence and Space + */ +#define AIRBUS_DS_VID 0x1e8e /* Vendor ID */ +#define AIRBUS_DS_P8GR 0x6001 /* Tetra P8GR */ + +/* * RT Systems programming cables for various ham radios */ #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ Patches currently in stable-queue which might be from max.schulze(a)posteo.de are queue-4.9/usb-serial-ftdi_sio-add-id-for-airbus-ds-p8gr.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "USB: Fix off by one in type-specific length check of BOS SSP capability" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: Fix off by one in type-specific length check of BOS SSP capability to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-fix-off-by-one-in-type-specific-length-check-of-bos-ssp-capability.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Tue, 19 Dec 2017 11:14:42 +0200 Subject: USB: Fix off by one in type-specific length check of BOS SSP capability From: Mathias Nyman <mathias.nyman(a)linux.intel.com> commit 07b9f12864d16c3a861aef4817eb1efccbc5d0e6 upstream. USB 3.1 devices are not detected as 3.1 capable since 4.15-rc3 due to a off by one in commit 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") It uses USB_DT_USB_SSP_CAP_SIZE() to get SSP capability size which takes the zero based SSAC as argument, not the actual count of sublink speed attributes. USB3 spec 9.6.2.5 says "The number of Sublink Speed Attributes = SSAC + 1." The type-specific length check patch was added to stable and needs to be fixed there as well Fixes: 81cf4a45360f ("USB: core: Add type-specific length check of BOS descriptors") CC: Masakazu Mokuno <masakazu.mokuno(a)gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1002,7 +1002,7 @@ int usb_get_bos_descriptor(struct usb_de case USB_SSP_CAP_TYPE: ssp_cap = (struct usb_ssp_cap_descriptor *)buffer; ssac = (le32_to_cpu(ssp_cap->bmAttributes) & - USB_SSP_SUBLINK_SPEED_ATTRIBS) + 1; + USB_SSP_SUBLINK_SPEED_ATTRIBS); if (length >= USB_DT_USB_SSP_CAP_SIZE(ssac)) dev->bos->ssp_cap = ssp_cap; break; Patches currently in stable-queue which might be from mathias.nyman(a)linux.intel.com are queue-4.9/usb-fix-off-by-one-in-type-specific-length-check-of-bos-ssp-capability.patch queue-4.9/usb-xhci-add-xhci_trust_tx_length-for-renesas-upd720201.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: add RESET_RESUME for ELSA MicroLink 56K" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: add RESET_RESUME for ELSA MicroLink 56K to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-add-reset_resume-for-elsa-microlink-56k.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b9096d9f15c142574ebebe8fbb137012bb9d99c2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oneukum(a)suse.com> Date: Tue, 12 Dec 2017 16:11:30 +0100 Subject: usb: add RESET_RESUME for ELSA MicroLink 56K From: Oliver Neukum <oneukum(a)suse.com> commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream. This modem needs this quirk to operate. It produces timeouts when resumed without reset. Signed-off-by: Oliver Neukum <oneukum(a)suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -155,6 +155,9 @@ static const struct usb_device_id usb_qu /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */ { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM }, + /* ELSA MicroLink 56K */ + { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, Patches currently in stable-queue which might be from oneukum(a)suse.com are queue-4.9/usb-add-reset_resume-for-elsa-microlink-56k.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: Add device quirk for Logitech HD Pro Webcam C925e" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: Add device quirk for Logitech HD Pro Webcam C925e to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-add-device-quirk-for-logitech-hd-pro-webcam-c925e.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7f038d256c723dd390d2fca942919573995f4cfd Mon Sep 17 00:00:00 2001 From: Dmitry Fleytman Dmitry Fleytman <dmitry.fleytman(a)gmail.com> Date: Tue, 19 Dec 2017 06:02:04 +0200 Subject: usb: Add device quirk for Logitech HD Pro Webcam C925e From: Dmitry Fleytman Dmitry Fleytman <dmitry.fleytman(a)gmail.com> commit 7f038d256c723dd390d2fca942919573995f4cfd upstream. Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. There is one more model that has the same issue - C925e, so applying the same quirk as well. See aforementioned commit message for detailed explanation of the problem. Signed-off-by: Dmitry Fleytman <dmitry.fleytman(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -57,10 +57,11 @@ static const struct usb_device_id usb_qu /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, - /* Logitech HD Pro Webcams C920, C920-C and C930e */ + /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */ { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT }, { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT }, /* Logitech ConferenceCam CC3000e */ { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT }, Patches currently in stable-queue which might be from dmitry.fleytman(a)gmail.com are queue-4.9/usb-add-device-quirk-for-logitech-hd-pro-webcam-c925e.patch

6 years, 11 months

1
0
0 0

[Linux-stable-mirror] Patch "timers: Use deferrable base independent of base::nohz_active" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled timers: Use deferrable base independent of base::nohz_active to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: timers-use-deferrable-base-independent-of-base-nohz_active.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ced6d5c11d3e7b342f1a80f908e6756ebd4b8ddd Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner <anna-maria(a)linutronix.de> Date: Fri, 22 Dec 2017 15:51:12 +0100 Subject: timers: Use deferrable base independent of base::nohz_active From: Anna-Maria Gleixner <anna-maria(a)linutronix.de> commit ced6d5c11d3e7b342f1a80f908e6756ebd4b8ddd upstream. During boot and before base::nohz_active is set in the timer bases, deferrable timers are enqueued into the standard timer base. This works correctly as long as base::nohz_active is false. Once it base::nohz_active is set and a timer which was enqueued before that is accessed the lock selector code choses the lock of the deferred base. This causes unlocked access to the standard base and in case the timer is removed it does not clear the pending flag in the standard base bitmap which causes get_next_timer_interrupt() to return bogus values. To prevent that, the deferrable timers must be enqueued in the deferrable base, even when base::nohz_active is not set. Those deferrable timers also need to be expired unconditional. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Anna-Maria Gleixner <anna-maria(a)linutronix.de> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec(a)gmail.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Sebastian Siewior <bigeasy(a)linutronix.de> Cc: rt(a)linutronix.de Cc: Paul McKenney <paulmck(a)linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20171222145337.633328378@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- kernel/time/timer.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) --- a/kernel/time/timer.c +++ b/kernel/time/timer.c @@ -849,11 +849,10 @@ static inline struct timer_base *get_tim struct timer_base *base = per_cpu_ptr(&timer_bases[BASE_STD], cpu); /* - * If the timer is deferrable and nohz is active then we need to use - * the deferrable base. + * If the timer is deferrable and NO_HZ_COMMON is set then we need + * to use the deferrable base. */ - if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active && - (tflags & TIMER_DEFERRABLE)) + if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && (tflags & TIMER_DEFERRABLE)) base = per_cpu_ptr(&timer_bases[BASE_DEF], cpu); return base; } @@ -863,11 +862,10 @@ static inline struct timer_base *get_tim struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]); /* - * If the timer is deferrable and nohz is active then we need to use - * the deferrable base. + * If the timer is deferrable and NO_HZ_COMMON is set then we need + * to use the deferrable base. */ - if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active && - (tflags & TIMER_DEFERRABLE)) + if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && (tflags & TIMER_DEFERRABLE)) base = this_cpu_ptr(&timer_bases[BASE_DEF]); return base; } @@ -1684,7 +1682,7 @@ static __latent_entropy void run_timer_s base->must_forward_clk = false; __run_timers(base); - if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && base->nohz_active) + if (IS_ENABLED(CONFIG_NO_HZ_COMMON)) __run_timers(this_cpu_ptr(&timer_bases[BASE_DEF])); } Patches currently in stable-queue which might be from anna-maria(a)linutronix.de are queue-4.9/nohz-prevent-a-timer-interrupt-storm-in-tick_nohz_stop_sched_tick.patch queue-4.9/timers-invoke-timer_start_debug-where-it-makes-sense.patch queue-4.9/timers-use-deferrable-base-independent-of-base-nohz_active.patch queue-4.9/timers-reinitialize-per-cpu-bases-on-hotplug.patch

6 years, 11 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2018