March 2019 - Linux-stable-mirror

FAILED: patch "[PATCH] mm/hotplug: fix offline undo_isolate_page_range()" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9b7ea46a82b31c74a37e6ff1c2a1df7d53e392ab Mon Sep 17 00:00:00 2001 From: Qian Cai <cai(a)lca.pw> Date: Thu, 28 Mar 2019 20:43:34 -0700 Subject: [PATCH] mm/hotplug: fix offline undo_isolate_page_range() Commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") introduced move_pfn_range_to_zone() which calls memmap_init_zone() during onlining a memory block. memmap_init_zone() will reset pagetype flags and makes migrate type to be MOVABLE. However, in __offline_pages(), it also call undo_isolate_page_range() after offline_isolated_pages() to do the same thing. Due to commit 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") changed __first_valid_page() to skip offline pages, undo_isolate_page_range() here just waste CPU cycles looping around the offlining PFN range while doing nothing, because __first_valid_page() will return NULL as offline_isolated_pages() has already marked all memory sections within the pfn range as offline via offline_mem_sections(). Also, after calling the "useless" undo_isolate_page_range() here, it reaches the point of no returning by notifying MEM_OFFLINE. Those pages will be marked as MIGRATE_MOVABLE again once onlining. The only thing left to do is to decrease the number of isolated pageblocks zone counter which would make some paths of the page allocation slower that the above commit introduced. Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages on ppc64, an "int" should still be enough to represent the number of pageblocks there. Fix an incorrect comment along the way. [cai(a)lca.pw: v4] Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw Fixes: 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") Signed-off-by: Qian Cai <cai(a)lca.pw> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Oscar Salvador <osalvador(a)suse.de> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: <stable(a)vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h index 4eb26d278046..280ae96dc4c3 100644 --- a/include/linux/page-isolation.h +++ b/include/linux/page-isolation.h @@ -41,16 +41,6 @@ int move_freepages_block(struct zone *zone, struct page *page, /* * Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE. - * If specified range includes migrate types other than MOVABLE or CMA, - * this will fail with -EBUSY. - * - * For isolating all pages in the range finally, the caller have to - * free all pages in the range. test_page_isolated() can be used for - * test it. - * - * The following flags are allowed (they can be combined in a bit mask) - * SKIP_HWPOISON - ignore hwpoison pages - * REPORT_FAILURE - report details about the failure to isolate the range */ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index f767582af4f8..0e0a16021fd5 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1576,7 +1576,7 @@ static int __ref __offline_pages(unsigned long start_pfn, { unsigned long pfn, nr_pages; long offlined_pages; - int ret, node; + int ret, node, nr_isolate_pageblock; unsigned long flags; unsigned long valid_start, valid_end; struct zone *zone; @@ -1602,10 +1602,11 @@ static int __ref __offline_pages(unsigned long start_pfn, ret = start_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE, SKIP_HWPOISON | REPORT_FAILURE); - if (ret) { + if (ret < 0) { reason = "failure to isolate range"; goto failed_removal; } + nr_isolate_pageblock = ret; arg.start_pfn = start_pfn; arg.nr_pages = nr_pages; @@ -1657,8 +1658,16 @@ static int __ref __offline_pages(unsigned long start_pfn, /* Ok, all of our target is isolated. We cannot do rollback at this point. */ offline_isolated_pages(start_pfn, end_pfn); - /* reset pagetype flags and makes migrate type to be MOVABLE */ - undo_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE); + + /* + * Onlining will reset pagetype flags and makes migrate type + * MOVABLE, so just need to decrease the number of isolated + * pageblocks zone counter here. + */ + spin_lock_irqsave(&zone->lock, flags); + zone->nr_isolate_pageblock -= nr_isolate_pageblock; + spin_unlock_irqrestore(&zone->lock, flags); + /* removal success */ adjust_managed_page_count(pfn_to_page(start_pfn), -offlined_pages); zone->present_pages -= offlined_pages; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 03fcf73d47da..d96ca5bc555b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -8233,7 +8233,7 @@ int alloc_contig_range(unsigned long start, unsigned long end, ret = start_isolate_page_range(pfn_max_align_down(start), pfn_max_align_up(end), migratetype, 0); - if (ret) + if (ret < 0) return ret; /* diff --git a/mm/page_isolation.c b/mm/page_isolation.c index ce323e56b34d..bf4159d771c7 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -160,27 +160,36 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages) return NULL; } -/* - * start_isolate_page_range() -- make page-allocation-type of range of pages - * to be MIGRATE_ISOLATE. - * @start_pfn: The lower PFN of the range to be isolated. - * @end_pfn: The upper PFN of the range to be isolated. - * @migratetype: migrate type to set in error recovery. +/** + * start_isolate_page_range() - make page-allocation-type of range of pages to + * be MIGRATE_ISOLATE. + * @start_pfn: The lower PFN of the range to be isolated. + * @end_pfn: The upper PFN of the range to be isolated. + * start_pfn/end_pfn must be aligned to pageblock_order. + * @migratetype: Migrate type to set in error recovery. + * @flags: The following flags are allowed (they can be combined in + * a bit mask) + * SKIP_HWPOISON - ignore hwpoison pages + * REPORT_FAILURE - report details about the failure to + * isolate the range * * Making page-allocation-type to be MIGRATE_ISOLATE means free pages in * the range will never be allocated. Any free pages and pages freed in the - * future will not be allocated again. - * - * start_pfn/end_pfn must be aligned to pageblock_order. - * Return 0 on success and -EBUSY if any part of range cannot be isolated. + * future will not be allocated again. If specified range includes migrate types + * other than MOVABLE or CMA, this will fail with -EBUSY. For isolating all + * pages in the range finally, the caller have to free all pages in the range. + * test_page_isolated() can be used for test it. * * There is no high level synchronization mechanism that prevents two threads - * from trying to isolate overlapping ranges. If this happens, one thread + * from trying to isolate overlapping ranges. If this happens, one thread * will notice pageblocks in the overlapping range already set to isolate. * This happens in set_migratetype_isolate, and set_migratetype_isolate - * returns an error. We then clean up by restoring the migration type on - * pageblocks we may have modified and return -EBUSY to caller. This + * returns an error. We then clean up by restoring the migration type on + * pageblocks we may have modified and return -EBUSY to caller. This * prevents two threads from simultaneously working on overlapping ranges. + * + * Return: the number of isolated pageblocks on success and -EBUSY if any part + * of range cannot be isolated. */ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, unsigned migratetype, int flags) @@ -188,6 +197,7 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, unsigned long pfn; unsigned long undo_pfn; struct page *page; + int nr_isolate_pageblock = 0; BUG_ON(!IS_ALIGNED(start_pfn, pageblock_nr_pages)); BUG_ON(!IS_ALIGNED(end_pfn, pageblock_nr_pages)); @@ -196,13 +206,15 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, pfn < end_pfn; pfn += pageblock_nr_pages) { page = __first_valid_page(pfn, pageblock_nr_pages); - if (page && - set_migratetype_isolate(page, migratetype, flags)) { - undo_pfn = pfn; - goto undo; + if (page) { + if (set_migratetype_isolate(page, migratetype, flags)) { + undo_pfn = pfn; + goto undo; + } + nr_isolate_pageblock++; } } - return 0; + return nr_isolate_pageblock; undo: for (pfn = start_pfn; pfn < undo_pfn; diff --git a/mm/sparse.c b/mm/sparse.c index 69904aa6165b..56e057c432f9 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -567,7 +567,7 @@ void online_mem_sections(unsigned long start_pfn, unsigned long end_pfn) } #ifdef CONFIG_MEMORY_HOTREMOVE -/* Mark all memory sections within the pfn range as online */ +/* Mark all memory sections within the pfn range as offline */ void offline_mem_sections(unsigned long start_pfn, unsigned long end_pfn) { unsigned long pfn;

5 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] mm/hotplug: fix offline undo_isolate_page_range()" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9b7ea46a82b31c74a37e6ff1c2a1df7d53e392ab Mon Sep 17 00:00:00 2001 From: Qian Cai <cai(a)lca.pw> Date: Thu, 28 Mar 2019 20:43:34 -0700 Subject: [PATCH] mm/hotplug: fix offline undo_isolate_page_range() Commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") introduced move_pfn_range_to_zone() which calls memmap_init_zone() during onlining a memory block. memmap_init_zone() will reset pagetype flags and makes migrate type to be MOVABLE. However, in __offline_pages(), it also call undo_isolate_page_range() after offline_isolated_pages() to do the same thing. Due to commit 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") changed __first_valid_page() to skip offline pages, undo_isolate_page_range() here just waste CPU cycles looping around the offlining PFN range while doing nothing, because __first_valid_page() will return NULL as offline_isolated_pages() has already marked all memory sections within the pfn range as offline via offline_mem_sections(). Also, after calling the "useless" undo_isolate_page_range() here, it reaches the point of no returning by notifying MEM_OFFLINE. Those pages will be marked as MIGRATE_MOVABLE again once onlining. The only thing left to do is to decrease the number of isolated pageblocks zone counter which would make some paths of the page allocation slower that the above commit introduced. Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages on ppc64, an "int" should still be enough to represent the number of pageblocks there. Fix an incorrect comment along the way. [cai(a)lca.pw: v4] Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw Fixes: 2ce13640b3f4 ("mm: __first_valid_page skip over offline pages") Signed-off-by: Qian Cai <cai(a)lca.pw> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Oscar Salvador <osalvador(a)suse.de> Cc: Vlastimil Babka <vbabka(a)suse.cz> Cc: <stable(a)vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h index 4eb26d278046..280ae96dc4c3 100644 --- a/include/linux/page-isolation.h +++ b/include/linux/page-isolation.h @@ -41,16 +41,6 @@ int move_freepages_block(struct zone *zone, struct page *page, /* * Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE. - * If specified range includes migrate types other than MOVABLE or CMA, - * this will fail with -EBUSY. - * - * For isolating all pages in the range finally, the caller have to - * free all pages in the range. test_page_isolated() can be used for - * test it. - * - * The following flags are allowed (they can be combined in a bit mask) - * SKIP_HWPOISON - ignore hwpoison pages - * REPORT_FAILURE - report details about the failure to isolate the range */ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index f767582af4f8..0e0a16021fd5 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1576,7 +1576,7 @@ static int __ref __offline_pages(unsigned long start_pfn, { unsigned long pfn, nr_pages; long offlined_pages; - int ret, node; + int ret, node, nr_isolate_pageblock; unsigned long flags; unsigned long valid_start, valid_end; struct zone *zone; @@ -1602,10 +1602,11 @@ static int __ref __offline_pages(unsigned long start_pfn, ret = start_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE, SKIP_HWPOISON | REPORT_FAILURE); - if (ret) { + if (ret < 0) { reason = "failure to isolate range"; goto failed_removal; } + nr_isolate_pageblock = ret; arg.start_pfn = start_pfn; arg.nr_pages = nr_pages; @@ -1657,8 +1658,16 @@ static int __ref __offline_pages(unsigned long start_pfn, /* Ok, all of our target is isolated. We cannot do rollback at this point. */ offline_isolated_pages(start_pfn, end_pfn); - /* reset pagetype flags and makes migrate type to be MOVABLE */ - undo_isolate_page_range(start_pfn, end_pfn, MIGRATE_MOVABLE); + + /* + * Onlining will reset pagetype flags and makes migrate type + * MOVABLE, so just need to decrease the number of isolated + * pageblocks zone counter here. + */ + spin_lock_irqsave(&zone->lock, flags); + zone->nr_isolate_pageblock -= nr_isolate_pageblock; + spin_unlock_irqrestore(&zone->lock, flags); + /* removal success */ adjust_managed_page_count(pfn_to_page(start_pfn), -offlined_pages); zone->present_pages -= offlined_pages; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 03fcf73d47da..d96ca5bc555b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -8233,7 +8233,7 @@ int alloc_contig_range(unsigned long start, unsigned long end, ret = start_isolate_page_range(pfn_max_align_down(start), pfn_max_align_up(end), migratetype, 0); - if (ret) + if (ret < 0) return ret; /* diff --git a/mm/page_isolation.c b/mm/page_isolation.c index ce323e56b34d..bf4159d771c7 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -160,27 +160,36 @@ __first_valid_page(unsigned long pfn, unsigned long nr_pages) return NULL; } -/* - * start_isolate_page_range() -- make page-allocation-type of range of pages - * to be MIGRATE_ISOLATE. - * @start_pfn: The lower PFN of the range to be isolated. - * @end_pfn: The upper PFN of the range to be isolated. - * @migratetype: migrate type to set in error recovery. +/** + * start_isolate_page_range() - make page-allocation-type of range of pages to + * be MIGRATE_ISOLATE. + * @start_pfn: The lower PFN of the range to be isolated. + * @end_pfn: The upper PFN of the range to be isolated. + * start_pfn/end_pfn must be aligned to pageblock_order. + * @migratetype: Migrate type to set in error recovery. + * @flags: The following flags are allowed (they can be combined in + * a bit mask) + * SKIP_HWPOISON - ignore hwpoison pages + * REPORT_FAILURE - report details about the failure to + * isolate the range * * Making page-allocation-type to be MIGRATE_ISOLATE means free pages in * the range will never be allocated. Any free pages and pages freed in the - * future will not be allocated again. - * - * start_pfn/end_pfn must be aligned to pageblock_order. - * Return 0 on success and -EBUSY if any part of range cannot be isolated. + * future will not be allocated again. If specified range includes migrate types + * other than MOVABLE or CMA, this will fail with -EBUSY. For isolating all + * pages in the range finally, the caller have to free all pages in the range. + * test_page_isolated() can be used for test it. * * There is no high level synchronization mechanism that prevents two threads - * from trying to isolate overlapping ranges. If this happens, one thread + * from trying to isolate overlapping ranges. If this happens, one thread * will notice pageblocks in the overlapping range already set to isolate. * This happens in set_migratetype_isolate, and set_migratetype_isolate - * returns an error. We then clean up by restoring the migration type on - * pageblocks we may have modified and return -EBUSY to caller. This + * returns an error. We then clean up by restoring the migration type on + * pageblocks we may have modified and return -EBUSY to caller. This * prevents two threads from simultaneously working on overlapping ranges. + * + * Return: the number of isolated pageblocks on success and -EBUSY if any part + * of range cannot be isolated. */ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, unsigned migratetype, int flags) @@ -188,6 +197,7 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, unsigned long pfn; unsigned long undo_pfn; struct page *page; + int nr_isolate_pageblock = 0; BUG_ON(!IS_ALIGNED(start_pfn, pageblock_nr_pages)); BUG_ON(!IS_ALIGNED(end_pfn, pageblock_nr_pages)); @@ -196,13 +206,15 @@ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, pfn < end_pfn; pfn += pageblock_nr_pages) { page = __first_valid_page(pfn, pageblock_nr_pages); - if (page && - set_migratetype_isolate(page, migratetype, flags)) { - undo_pfn = pfn; - goto undo; + if (page) { + if (set_migratetype_isolate(page, migratetype, flags)) { + undo_pfn = pfn; + goto undo; + } + nr_isolate_pageblock++; } } - return 0; + return nr_isolate_pageblock; undo: for (pfn = start_pfn; pfn < undo_pfn; diff --git a/mm/sparse.c b/mm/sparse.c index 69904aa6165b..56e057c432f9 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -567,7 +567,7 @@ void online_mem_sections(unsigned long start_pfn, unsigned long end_pfn) } #ifdef CONFIG_MEMORY_HOTREMOVE -/* Mark all memory sections within the pfn range as online */ +/* Mark all memory sections within the pfn range as offline */ void offline_mem_sections(unsigned long start_pfn, unsigned long end_pfn) { unsigned long pfn;

5 years, 8 months

1
0
0 0

[STABLE PATCH 2/2] xfs: hold xfs_buf locked between shortform->leaf conversion and the addition of an attribute

by Alex Lyakas

From: "Darrick J. Wong" <darrick.wong(a)oracle.com> The new attribute leaf buffer is not held locked across the transaction roll between the shortform->leaf modification and the addition of the new entry. As a result, the attribute buffer modification being made is not atomic from an operational perspective. Hence the AIL push can grab it in the transient state of "just created" after the initial transaction is rolled, because the buffer has been released. This leads to xfs_attr3_leaf_verify() asserting that hdr.count is zero, treating this as in-memory corruption, and shutting down the filesystem. Darrick ported the original patch to 4.15 and reworked it use the xfs_defer_bjoin helper and hold/join the buffer correctly across the second transaction roll. Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Alex Lyakas <alex(a)zadara.com> --- fs/xfs/libxfs/xfs_attr.c | 20 +++++++++++++++----- fs/xfs/libxfs/xfs_attr_leaf.c | 9 ++++++--- fs/xfs/libxfs/xfs_attr_leaf.h | 3 ++- 3 files changed, 23 insertions(+), 9 deletions(-) diff --git a/fs/xfs/libxfs/xfs_attr.c b/fs/xfs/libxfs/xfs_attr.c index ea66f04..e4265db 100644 --- a/fs/xfs/libxfs/xfs_attr.c +++ b/fs/xfs/libxfs/xfs_attr.c @@ -212,6 +212,7 @@ int flags) { struct xfs_mount *mp = dp->i_mount; + struct xfs_buf *leaf_bp = NULL; struct xfs_da_args args; struct xfs_defer_ops dfops; struct xfs_trans_res tres; @@ -327,9 +328,16 @@ * GROT: another possible req'mt for a double-split btree op. */ xfs_defer_init(args.dfops, args.firstblock); - error = xfs_attr_shortform_to_leaf(&args); + error = xfs_attr_shortform_to_leaf(&args, &leaf_bp); if (error) goto out_defer_cancel; + /* + * Prevent the leaf buffer from being unlocked so that a + * concurrent AIL push cannot grab the half-baked leaf + * buffer and run into problems with the write verifier. + */ + xfs_trans_bhold(args.trans, leaf_bp); + xfs_defer_bjoin(args.dfops, leaf_bp); xfs_defer_ijoin(args.dfops, dp); error = xfs_defer_finish(&args.trans, args.dfops); if (error) @@ -337,13 +345,14 @@ /* * Commit the leaf transformation. We'll need another (linked) - * transaction to add the new attribute to the leaf. + * transaction to add the new attribute to the leaf, which + * means that we have to hold & join the leaf buffer here too. */ - error = xfs_trans_roll_inode(&args.trans, dp); if (error) goto out; - + xfs_trans_bjoin(args.trans, leaf_bp); + leaf_bp = NULL; } if (xfs_bmap_one_block(dp, XFS_ATTR_FORK)) @@ -374,8 +383,9 @@ out_defer_cancel: xfs_defer_cancel(&dfops); - args.trans = NULL; out: + if (leaf_bp) + xfs_trans_brelse(args.trans, leaf_bp); if (args.trans) xfs_trans_cancel(args.trans); xfs_iunlock(dp, XFS_ILOCK_EXCL); diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index 40e53a4..73a5417 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -739,10 +739,13 @@ STATIC void xfs_attr3_leaf_moveents(struct xfs_da_args *args, } /* - * Convert from using the shortform to the leaf. + * Convert from using the shortform to the leaf. On success, return the + * buffer so that we can keep it locked until we're totally done with it. */ int -xfs_attr_shortform_to_leaf(xfs_da_args_t *args) +xfs_attr_shortform_to_leaf( + struct xfs_da_args *args, + struct xfs_buf **leaf_bp) { xfs_inode_t *dp; xfs_attr_shortform_t *sf; @@ -821,7 +824,7 @@ STATIC void xfs_attr3_leaf_moveents(struct xfs_da_args *args, sfe = XFS_ATTR_SF_NEXTENTRY(sfe); } error = 0; - + *leaf_bp = bp; out: kmem_free(tmpbuffer); return error; diff --git a/fs/xfs/libxfs/xfs_attr_leaf.h b/fs/xfs/libxfs/xfs_attr_leaf.h index f7dda0c..894124e 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.h +++ b/fs/xfs/libxfs/xfs_attr_leaf.h @@ -48,7 +48,8 @@ void xfs_attr_shortform_add(struct xfs_da_args *args, int forkoff); int xfs_attr_shortform_lookup(struct xfs_da_args *args); int xfs_attr_shortform_getvalue(struct xfs_da_args *args); -int xfs_attr_shortform_to_leaf(struct xfs_da_args *args); +int xfs_attr_shortform_to_leaf(struct xfs_da_args *args, + struct xfs_buf **leaf_bp); int xfs_attr_shortform_remove(struct xfs_da_args *args); int xfs_attr_shortform_allfit(struct xfs_buf *bp, struct xfs_inode *dp); int xfs_attr_shortform_bytesfit(struct xfs_inode *dp, int bytes); -- 1.9.1

5 years, 8 months

1
0
0 0

[STABLE PATCH 1/2] xfs: add the ability to join a held buffer to a defer_ops

by Alex Lyakas

From: "Darrick J. Wong" <darrick.wong(a)oracle.com> In certain cases, defer_ops callers will lock a buffer and want to hold the lock across transaction rolls. Similar to ijoined inodes, we want to dirty & join the buffer with each transaction roll in defer_finish so that afterwards the caller still owns the buffer lock and we haven't inadvertently pinned the log. Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Alex Lyakas <alex(a)zadara.com> --- fs/xfs/libxfs/xfs_defer.c | 39 ++++++++++++++++++++++++++++++++++++--- fs/xfs/libxfs/xfs_defer.h | 5 ++++- 2 files changed, 40 insertions(+), 4 deletions(-) diff --git a/fs/xfs/libxfs/xfs_defer.c b/fs/xfs/libxfs/xfs_defer.c index 072ebfe..087fea0 100644 --- a/fs/xfs/libxfs/xfs_defer.c +++ b/fs/xfs/libxfs/xfs_defer.c @@ -249,6 +249,10 @@ for (i = 0; i < XFS_DEFER_OPS_NR_INODES && dop->dop_inodes[i]; i++) xfs_trans_log_inode(*tp, dop->dop_inodes[i], XFS_ILOG_CORE); + /* Hold the (previously bjoin'd) buffer locked across the roll. */ + for (i = 0; i < XFS_DEFER_OPS_NR_BUFS && dop->dop_bufs[i]; i++) + xfs_trans_dirty_buf(*tp, dop->dop_bufs[i]); + trace_xfs_defer_trans_roll((*tp)->t_mountp, dop); /* Roll the transaction. */ @@ -264,6 +268,12 @@ for (i = 0; i < XFS_DEFER_OPS_NR_INODES && dop->dop_inodes[i]; i++) xfs_trans_ijoin(*tp, dop->dop_inodes[i], 0); + /* Rejoin the buffers and dirty them so the log moves forward. */ + for (i = 0; i < XFS_DEFER_OPS_NR_BUFS && dop->dop_bufs[i]; i++) { + xfs_trans_bjoin(*tp, dop->dop_bufs[i]); + xfs_trans_bhold(*tp, dop->dop_bufs[i]); + } + return error; } @@ -295,6 +305,31 @@ } } + ASSERT(0); + return -EFSCORRUPTED; +} + +/* + * Add this buffer to the deferred op. Each joined buffer is relogged + * each time we roll the transaction. + */ +int +xfs_defer_bjoin( + struct xfs_defer_ops *dop, + struct xfs_buf *bp) +{ + int i; + + for (i = 0; i < XFS_DEFER_OPS_NR_BUFS; i++) { + if (dop->dop_bufs[i] == bp) + return 0; + else if (dop->dop_bufs[i] == NULL) { + dop->dop_bufs[i] = bp; + return 0; + } + } + + ASSERT(0); return -EFSCORRUPTED; } @@ -493,9 +528,7 @@ struct xfs_defer_ops *dop, xfs_fsblock_t *fbp) { - dop->dop_committed = false; - dop->dop_low = false; - memset(&dop->dop_inodes, 0, sizeof(dop->dop_inodes)); + memset(dop, 0, sizeof(struct xfs_defer_ops)); *fbp = NULLFSBLOCK; INIT_LIST_HEAD(&dop->dop_intake); INIT_LIST_HEAD(&dop->dop_pending); diff --git a/fs/xfs/libxfs/xfs_defer.h b/fs/xfs/libxfs/xfs_defer.h index d4f046d..045beac 100644 --- a/fs/xfs/libxfs/xfs_defer.h +++ b/fs/xfs/libxfs/xfs_defer.h @@ -59,6 +59,7 @@ enum xfs_defer_ops_type { }; #define XFS_DEFER_OPS_NR_INODES 2 /* join up to two inodes */ +#define XFS_DEFER_OPS_NR_BUFS 2 /* join up to two buffers */ struct xfs_defer_ops { bool dop_committed; /* did any trans commit? */ @@ -66,8 +67,9 @@ struct xfs_defer_ops { struct list_head dop_intake; /* unlogged pending work */ struct list_head dop_pending; /* logged pending work */ - /* relog these inodes with each roll */ + /* relog these with each roll */ struct xfs_inode *dop_inodes[XFS_DEFER_OPS_NR_INODES]; + struct xfs_buf *dop_bufs[XFS_DEFER_OPS_NR_BUFS]; }; void xfs_defer_add(struct xfs_defer_ops *dop, enum xfs_defer_ops_type type, @@ -77,6 +79,7 @@ void xfs_defer_add(struct xfs_defer_ops *dop, enum xfs_defer_ops_type type, void xfs_defer_init(struct xfs_defer_ops *dop, xfs_fsblock_t *fbp); bool xfs_defer_has_unfinished_work(struct xfs_defer_ops *dop); int xfs_defer_ijoin(struct xfs_defer_ops *dop, struct xfs_inode *ip); +int xfs_defer_bjoin(struct xfs_defer_ops *dop, struct xfs_buf *bp); /* Description of a deferred type. */ struct xfs_defer_op_type { -- 1.9.1

5 years, 8 months

1
0
0 0

[PATCH 8/8] fbdev: sm712fb: use 1024x768 by default on non-MIPS, fix garbled display.

by Yifeng Li

Loongson MIPS netbooks use 1024x600 LCD panels, which is the original target platform of this driver, but nearly all old x86 laptops have 1024x768. Lighting 768 panels using 600's timings would partially garble the display. Since it's not possible to distinguish them reliably, we change the default to 768, but keep 600 as-is on MIPS. Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD panel, this driver would probably garbled those display. As we don't have one for testing, the original behavior of the driver is kept as-is, but the problem has been documented is the comments. Signed-off-by: Yifeng Li <tomli(a)tomli.me> Cc: stable(a)vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712.h | 7 +++-- drivers/video/fbdev/sm712fb.c | 53 ++++++++++++++++++++++++++--------- 2 files changed, 44 insertions(+), 16 deletions(-) diff --git a/drivers/video/fbdev/sm712.h b/drivers/video/fbdev/sm712.h index 2cba1e73ed24..c7ebf03b8d53 100644 --- a/drivers/video/fbdev/sm712.h +++ b/drivers/video/fbdev/sm712.h @@ -15,9 +15,10 @@ #define FB_ACCEL_SMI_LYNX 88 -#define SCREEN_X_RES 1024 -#define SCREEN_Y_RES 600 -#define SCREEN_BPP 16 +#define SCREEN_X_RES 1024 +#define SCREEN_Y_RES_PC 768 +#define SCREEN_Y_RES_NETBOOK 600 +#define SCREEN_BPP 16 #define dac_reg (0x3c8) #define dac_val (0x3c9) diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index c39a2641182a..1e2503b52c6f 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1475,6 +1475,43 @@ static u_long sm7xx_vram_probe(struct smtcfb_info *sfb) return 0; /* unknown hardware */ } +static void sm7xx_resolution_probe(struct smtcfb_info *sfb) +{ + /* get mode parameter from smtc_scr_info */ + if (smtc_scr_info.lfb_width != 0) { + sfb->fb->var.xres = smtc_scr_info.lfb_width; + sfb->fb->var.yres = smtc_scr_info.lfb_height; + sfb->fb->var.bits_per_pixel = smtc_scr_info.lfb_depth; + goto final; + } + + /* + * No parameter, default resolution is 1024x768-16. + * + * FIXME: earlier laptops, such as IBM Thinkpad 240X, has a 800x600 + * panel, also see the comments about Thinkpad 240X above. + */ + sfb->fb->var.xres = SCREEN_X_RES; + sfb->fb->var.yres = SCREEN_Y_RES_PC; + sfb->fb->var.bits_per_pixel = SCREEN_BPP; + +#ifdef CONFIG_MIPS + /* + * Loongson MIPS netbooks use 1024x600 LCD panels, which is the original + * target platform of this driver, but nearly all old x86 laptops have + * 1024x768. Lighting 768 panels using 600's timings would partially + * garble the display, so we don't want that. But it's not possible to + * distinguish them reliably. + * + * So we change the default to 768, but keep 600 as-is on MIPS. + */ + sfb->fb->var.yres = SCREEN_Y_RES_NETBOOK; +#endif + +final: + big_pixel_depth(sfb->fb->var.bits_per_pixel, smtc_scr_info.lfb_depth); +} + static int smtcfb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -1520,19 +1557,6 @@ static int smtcfb_pci_probe(struct pci_dev *pdev, sm7xx_init_hw(); - /* get mode parameter from smtc_scr_info */ - if (smtc_scr_info.lfb_width != 0) { - sfb->fb->var.xres = smtc_scr_info.lfb_width; - sfb->fb->var.yres = smtc_scr_info.lfb_height; - sfb->fb->var.bits_per_pixel = smtc_scr_info.lfb_depth; - } else { - /* default resolution 1024x600 16bit mode */ - sfb->fb->var.xres = SCREEN_X_RES; - sfb->fb->var.yres = SCREEN_Y_RES; - sfb->fb->var.bits_per_pixel = SCREEN_BPP; - } - - big_pixel_depth(sfb->fb->var.bits_per_pixel, smtc_scr_info.lfb_depth); /* Map address and memory detection */ mmio_base = pci_resource_start(pdev, 0); pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chip_rev_id); @@ -1594,6 +1618,9 @@ static int smtcfb_pci_probe(struct pci_dev *pdev, goto failed_fb; } + /* probe and decide resolution */ + sm7xx_resolution_probe(sfb); + /* can support 32 bpp */ if (sfb->fb->var.bits_per_pixel == 15) sfb->fb->var.bits_per_pixel = 16; -- 2.20.1

5 years, 8 months

2
1
0 0

[PATCH 7/8] fbdev: sm712fb: fix support for 1024x768-16 mode.

by Yifeng Li

In order to support the 1024x600 panel on Yeeloong Loongson MIPS laptop, the original 1024x768-16 table was modified to 1024x600-16, without leaving the original. It causes problem on x86 laptop as the 1024x768-16 support was still claimed but not working. Fix it by introducing the 1024x768-16 mode. Signed-off-by: Yifeng Li <tomli(a)tomli.me> Cc: stable(a)vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712fb.c | 59 +++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index a40d0ae7cb66..c39a2641182a 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -530,6 +530,65 @@ static const struct modeinit vgamode[] = { 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, }, }, + { /* 1024 x 768 16Bpp 60Hz */ + 1024, 768, 16, 60, + /* Init_MISC */ + 0xEB, + { /* Init_SR0_SR4 */ + 0x03, 0x01, 0x0F, 0x03, 0x0E, + }, + { /* Init_SR10_SR24 */ + 0xF3, 0xB6, 0xC0, 0xDD, 0x00, 0x0E, 0x17, 0x2C, + 0x99, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC4, 0x30, 0x02, 0x01, 0x01, + }, + { /* Init_SR30_SR75 */ + 0x38, 0x03, 0x20, 0x09, 0xC0, 0x3A, 0x3A, 0x3A, + 0x3A, 0x3A, 0x3A, 0x3A, 0x00, 0x00, 0x03, 0xFF, + 0x00, 0xFC, 0x00, 0x00, 0x20, 0x18, 0x00, 0xFC, + 0x20, 0x0C, 0x44, 0x20, 0x00, 0x00, 0x00, 0x3A, + 0x06, 0x68, 0xA7, 0x7F, 0x83, 0x24, 0xFF, 0x03, + 0x0F, 0x60, 0x59, 0x3A, 0x3A, 0x00, 0x00, 0x3A, + 0x01, 0x80, 0x7E, 0x1A, 0x1A, 0x00, 0x00, 0x00, + 0x50, 0x03, 0x74, 0x14, 0x3B, 0x0D, 0x09, 0x02, + 0x04, 0x45, 0x30, 0x30, 0x40, 0x20, + }, + { /* Init_SR80_SR93 */ + 0xFF, 0x07, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x3A, + 0xF7, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x3A, 0x3A, + 0x00, 0x00, 0x00, 0x00, + }, + { /* Init_SRA0_SRAF */ + 0x00, 0xFB, 0x9F, 0x01, 0x00, 0xED, 0xED, 0xED, + 0x7B, 0xFB, 0xFF, 0xFF, 0x97, 0xEF, 0xBF, 0xDF, + }, + { /* Init_GR00_GR08 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0F, + 0xFF, + }, + { /* Init_AR00_AR14 */ + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x41, 0x00, 0x0F, 0x00, 0x00, + }, + { /* Init_CR00_CR18 */ + 0xA3, 0x7F, 0x7F, 0x00, 0x85, 0x16, 0x24, 0xF5, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x09, 0xFF, 0x80, 0x40, 0xFF, 0x00, 0xE3, + 0xFF, + }, + { /* Init_CR30_CR4D */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x02, 0x20, + 0x00, 0x00, 0x00, 0x40, 0x00, 0xFF, 0xBF, 0xFF, + 0xA3, 0x7F, 0x00, 0x86, 0x15, 0x24, 0xFF, 0x00, + 0x01, 0x07, 0xE5, 0x20, 0x7F, 0xFF, + }, + { /* Init_CR90_CRA7 */ + 0x55, 0xD9, 0x5D, 0xE1, 0x86, 0x1B, 0x8E, 0x26, + 0xDA, 0x8D, 0xDE, 0x94, 0x00, 0x00, 0x18, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x15, 0x03, + }, + }, { /* mode#5: 1024 x 768 24Bpp 60Hz */ 1024, 768, 24, 60, /* Init_MISC */ -- 2.20.1

5 years, 8 months

2
1
0 0

[PATCH 6/8] fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting.

by Yifeng Li

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display or starting the X server will crash and freeze the system, or garble the display. Experiments showed this problem can mostly be solved by adjusting the order of register writes. Also, sm712fb failed to consider the difference of clock frequency when unblanking the display, and programs the clock for SM712 to SM720. Fix them by adjusting the order of register writes, and adding an additional check for SM720 for programming the clock frequency. Signed-off-by: Yifeng Li <tomli(a)tomli.me> Cc: stable(a)vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712fb.c | 64 +++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 26 deletions(-) diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index 52234c57be02..a40d0ae7cb66 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -827,67 +827,79 @@ static inline unsigned int chan_to_field(unsigned int chan, static int smtc_blank(int blank_mode, struct fb_info *info) { + struct smtcfb_info *sfb = info->par; + /* clear DPMS setting */ switch (blank_mode) { case FB_BLANK_UNBLANK: /* Screen On: HSync: On, VSync : On */ + + switch (sfb->chip_id) { + case 0x710: + case 0x712: + smtc_seqw(0x6a, 0x16); + smtc_seqw(0x6b, 0x02); + case 0x720: + smtc_seqw(0x6a, 0x0d); + smtc_seqw(0x6b, 0x02); + break; + } + + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); - smtc_seqw(0x6a, 0x16); - smtc_seqw(0x6b, 0x02); smtc_seqw(0x21, (smtc_seqr(0x21) & 0x77)); smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); - smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); - smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); smtc_seqw(0x31, (smtc_seqr(0x31) | 0x03)); + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); break; case FB_BLANK_NORMAL: /* Screen Off: HSync: On, VSync : On Soft blank */ + smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); smtc_seqw(0x01, (smtc_seqr(0x01) & (~0x20))); + smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); smtc_seqw(0x6a, 0x16); smtc_seqw(0x6b, 0x02); - smtc_seqw(0x22, (smtc_seqr(0x22) & (~0x30))); - smtc_seqw(0x23, (smtc_seqr(0x23) & (~0xc0))); - smtc_seqw(0x24, (smtc_seqr(0x24) | 0x01)); - smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); break; case FB_BLANK_VSYNC_SUSPEND: /* Screen On: HSync: On, VSync : Off */ + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20)); smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); - smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); - smtc_seqw(0x6a, 0x0c); - smtc_seqw(0x6b, 0x02); smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x20)); - smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0x20)); - smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); - smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); break; case FB_BLANK_HSYNC_SUSPEND: /* Screen On: HSync: Off, VSync : On */ + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); - smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); - smtc_seqw(0x6a, 0x0c); - smtc_seqw(0x6b, 0x02); smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x10)); - smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); - smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); - smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); break; case FB_BLANK_POWERDOWN: /* Screen On: HSync: Off, VSync : Off */ + smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); + smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); + smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); smtc_seqw(0x01, (smtc_seqr(0x01) | 0x20)); - smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); - smtc_seqw(0x6a, 0x0c); - smtc_seqw(0x6b, 0x02); smtc_seqw(0x21, (smtc_seqr(0x21) | 0x88)); + smtc_seqw(0x20, (smtc_seqr(0x20) & (~0xB0))); smtc_seqw(0x22, ((smtc_seqr(0x22) & (~0x30)) | 0x30)); - smtc_seqw(0x23, ((smtc_seqr(0x23) & (~0xc0)) | 0xD8)); - smtc_seqw(0x24, (smtc_seqr(0x24) & (~0x01))); - smtc_seqw(0x31, ((smtc_seqr(0x31) & (~0x07)) | 0x00)); smtc_seqw(0x34, (smtc_seqr(0x34) | 0x80)); + smtc_seqw(0x6a, 0x0c); + smtc_seqw(0x6b, 0x02); break; default: return -EINVAL; -- 2.20.1

5 years, 8 months

2
1
0 0

[PATCH 5/8] fbdev: sm712fb: fix crashes during framebuffer writes by correctly mapping VRAM.

by Yifeng Li

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X will crash the machine instantly, because the VRAM/framebuffer is not mapped correctly. On SM712, the framebuffer starts at the beginning of address space, but SM720's framebuffer starts at the 1 MiB offset from the beginning. However, sm712fb fails to take this into account, as a result, writing to the framebuffer will destroy all the registers and kill the system immediately. Another problem is the driver assumes 8 MiB of VRAM for SM720, but some SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM. Fix this problem by removing the hardcoded VRAM size, adding a function to query the amount of VRAM from register MCR76 on SM720, and adding proper framebuffer offset. Please note that the memory map may have additional problems on Big-Endian system, which is not available for testing by myself. But I highly suspect that the original code is also broken on Big-Endian machines for SM720, so at least we are not making the problem worse. More, the driver also assumed SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used in earlier laptops, such as IBM Thinkpad 240X, the driver would probably crash on them. I've never seen one of those machines and cannot fix it, but I have documented these problems in the comments. Signed-off-by: Yifeng Li <tomli(a)tomli.me> Cc: stable(a)vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712.h | 5 ---- drivers/video/fbdev/sm712fb.c | 48 ++++++++++++++++++++++++++++++++--- 2 files changed, 44 insertions(+), 9 deletions(-) diff --git a/drivers/video/fbdev/sm712.h b/drivers/video/fbdev/sm712.h index aad1cc4be34a..2cba1e73ed24 100644 --- a/drivers/video/fbdev/sm712.h +++ b/drivers/video/fbdev/sm712.h @@ -19,11 +19,6 @@ #define SCREEN_Y_RES 600 #define SCREEN_BPP 16 -/*Assume SM712 graphics chip has 4MB VRAM */ -#define SM712_VIDEOMEMORYSIZE 0x00400000 -/*Assume SM722 graphics chip has 8MB VRAM */ -#define SM722_VIDEOMEMORYSIZE 0x00800000 - #define dac_reg (0x3c8) #define dac_val (0x3c9) diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index e8149f0f47d5..52234c57be02 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1329,6 +1329,11 @@ static int smtc_map_smem(struct smtcfb_info *sfb, { sfb->fb->fix.smem_start = pci_resource_start(pdev, 0); + if (sfb->chip_id == 0x720) + /* on SM720, the framebuffer starts at the 1 MB offset */ + sfb->fb->fix.smem_start += 0x00200000; + + /* XXX: is it safe for SM720 on Big-Endian? */ if (sfb->fb->var.bits_per_pixel == 32) sfb->fb->fix.smem_start += big_addr; @@ -1366,12 +1371,45 @@ static inline void sm7xx_init_hw(void) outb_p(0x11, 0x3c5); } +static u_long sm7xx_vram_probe(struct smtcfb_info *sfb) +{ + u8 vram; + + switch (sfb->chip_id) { + case 0x710: + case 0x712: + /* + * Assume SM712 graphics chip has 4MB VRAM. + * + * FIXME: SM712 can have 2MB VRAM, which is used on earlier + * laptops, such as IBM Thinkpad 240X. This driver would + * probably crash on those machines. If anyone gets one of + * those and is willing to help, run "git blame" and send me + * an E-mail. + */ + return 0x00400000; + case 0x720: + outb_p(0x76, 0x3c4); + vram = inb_p(0x3c5) >> 6; + + if (vram == 0x00) + return 0x00800000; /* 8 MB */ + else if (vram == 0x01) + return 0x01000000; /* 16 MB */ + else if (vram == 0x02) + return 0x00400000; /* illegal, fallback to 4 MB */ + else if (vram == 0x03) + return 0x00400000; /* 4 MB */ + } + return 0; /* unknown hardware */ +} + static int smtcfb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct smtcfb_info *sfb; struct fb_info *info; - u_long smem_size = 0x00800000; /* default 8MB */ + u_long smem_size; int err; unsigned long mmio_base; @@ -1428,12 +1466,15 @@ static int smtcfb_pci_probe(struct pci_dev *pdev, mmio_base = pci_resource_start(pdev, 0); pci_read_config_byte(pdev, PCI_REVISION_ID, &sfb->chip_rev_id); + smem_size = sm7xx_vram_probe(sfb); + dev_info(&pdev->dev, "%lu MiB of VRAM detected.\n", + smem_size / 1048576); + switch (sfb->chip_id) { case 0x710: case 0x712: sfb->fb->fix.mmio_start = mmio_base + 0x00400000; sfb->fb->fix.mmio_len = 0x00400000; - smem_size = SM712_VIDEOMEMORYSIZE; sfb->lfb = ioremap(mmio_base, mmio_addr); if (!sfb->lfb) { dev_err(&pdev->dev, @@ -1465,8 +1506,7 @@ static int smtcfb_pci_probe(struct pci_dev *pdev, case 0x720: sfb->fb->fix.mmio_start = mmio_base; sfb->fb->fix.mmio_len = 0x00200000; - smem_size = SM722_VIDEOMEMORYSIZE; - sfb->dp_regs = ioremap(mmio_base, 0x00a00000); + sfb->dp_regs = ioremap(mmio_base, 0x00200000 + smem_size); sfb->lfb = sfb->dp_regs + 0x00200000; sfb->mmio = (smtc_regbaseaddress = sfb->dp_regs + 0x000c0000); -- 2.20.1

5 years, 8 months

2
2
0 0

[PATCH 4/8] fbdev: sm712fb: fix boot screen glitch when sm712fb replaces VGA.

by Yifeng Li

When the machine is booted in VGA mode, loading sm712fb would cause a glitch of random pixels shown on the screen. To prevent it from happening, we first clear the entire framebuffer, and we also need to stop calling smtcfb_setmode() during initialization, the fbdev layer will call it for us later when it's ready. Signed-off-by: Yifeng Li <tomli(a)tomli.me> Cc: stable(a)vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712fb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index 1a3d232c2916..e8149f0f47d5 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1493,7 +1493,11 @@ static int smtcfb_pci_probe(struct pci_dev *pdev, if (err) goto failed; - smtcfb_setmode(sfb); + /* + * The screen would be temporarily garbled when sm712fb takes over + * vesafb or VGA text mode. Zero the framebuffer. + */ + memset_io(sfb->lfb, 0, sfb->fb->fix.smem_len); err = register_framebuffer(info); if (err < 0) -- 2.20.1

5 years, 8 months

2
1
0 0

[PATCH 3/8] fbdev: sm712fb: fix VRAM detection, don't set SR70/71/74/75.

by Yifeng Li

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video RAM is not detected correctly by the xf86-video-siliconmotion driver. This is because sm712fb overwrites the GPR71 Scratch Pad Register, which is set by BIOS on x86 and used to indicate amount of VRAM. Other Scratch Pad Registers, including GPR70/74/75, don't have the same side-effect, but overwriting to them is still questionable, as they are not related to modesetting. Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75). Signed-off-by: Yifeng Li <tomli(a)tomli.me> Cc: stable(a)vger.kernel.org # v4.4+ --- drivers/video/fbdev/sm712fb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index a19655babf67..1a3d232c2916 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1146,7 +1146,9 @@ static void sm7xx_set_timing(struct smtcfb_info *sfb) /* init SEQ register SR30 - SR75 */ for (i = 0; i < SIZE_SR30_SR75; i++) if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 && - (i + 0x30) != 0x6a && (i + 0x30) != 0x6b) + (i + 0x30) != 0x6a && (i + 0x30) != 0x6b && + (i + 0x30) != 0x70 && (i + 0x30) != 0x71 && + (i + 0x30) != 0x74 && (i + 0x30) != 0x75) smtc_seqw(i + 0x30, vgamode[j].init_sr30_sr75[i]); -- 2.20.1

5 years, 8 months

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2019