Linux-stable-mirror
January 2020
linux-stable-mirror@lists.linaro.org
- 332 participants
- 1084 discussions
Re: [v3] x86/tsc: Unset TSC_KNOWN_FREQ and TSC_RELIABLE flags on Intel Bay Trail SoC
by Andy Shevchenko
+Cc: Hans, since he possesses a lot of BYT devices and may be interested in this
On Thu, Jan 23, 2020 at 06:00:28PM +0530, vipul kumar wrote:
> Hi Thomas,
>
> On Wed, Jan 22, 2020 at 8:15 PM Thomas Gleixner <tglx(a)linutronix.de> wrote:
>
> > Vipul,
> >
> > vipul kumar <vipulk0511(a)gmail.com> writes:
> > > On Tue, Jan 21, 2020 at 11:15 PM Thomas Gleixner <tglx(a)linutronix.de>
> > wrote:
> >
> > > Measurement with the existing code:
> > > $ echo -n "SystemTime: " ; TZ=UTC date -Iseconds ; echo -n "RTC Time:
> > > " ; TZ=UTC hwclock -r ; echo -n "Uptime: " ; uptime -p
> > > SystemTime: 2019-12-05T17:18:37+00:00
> > > RTC Time: 2019-12-05 17:18:07.255341+0000
> > > Uptime: up 1 day, 7 minutes
> > >
> > > This sample shows a difference of 30 seconds after 1 day.
> > >
> > > Measurement with this patch:
> > > SystemTime: 2019-12-11T12:06:19+00:00
> > > RTC Time: 2019-12-11 12:06:19.083127+0000
> > > Uptime: up 1 day, 3 minutes
> > >
> > > With this patch, no time drift issue is observed. and tsc clocksource
> > > get calibration (tsc: Refined TSC clocksource calibration: 1833.333 MHz)
> > > which is missing
> > > with the existing implementation.
> >
> > What's the frequency which is determined from the MSR? Something like
> > this in dmesg:
> >
> > tsc: Detected NNN MHz processor
> > or
> > tsc: Detected NNN MHz TSC
> >
>
> tsc: Detected 1832.600 MHz processor
>
> # dmesg | grep tsc
> [ 0.000000] tsc: Detected 1832.600 MHz processor
> [ 4.895129] tsc: Refined TSC clocksource calibration: 1833.332 MHz
> [ 4.895201] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x34da5269766, max_idle_ns: 881590747508 ns
> [ 5.903264] clocksource: Switched to clocksource tsc
>
> Attached full logs with patch and without patch.
>
> >
> > Also please apply the debug patch below and provide a _full_ dmesg after
> > boot.
> >
> > >> > +config X86_FEATURE_TSC_UNKNOWN_FREQ
> > >> > + bool "Support to skip tsc known frequency flag"
> > >> > + help
> > >> > + Include support to skip X86_FEATURE_TSC_KNOWN_FREQ flag
> > >> > +
> > >> > + X86_FEATURE_TSC_KNOWN_FREQ flag is causing time-drift on
> > >> Valleyview/
> > >> > + Baytrail SoC.
> > >> > + By selecting this option, user can skip
> > >> X86_FEATURE_TSC_KNOWN_FREQ
> > >> > + flag to use refine tsc freq calibration.
> > >>
> > >> This is exactly the same problem as before. How does anyone aside of you
> > >> know whether to enable this or not?
> > >>
> > > Go through the Documentation/kbuild/kconfig-language.rst but didn't
> > > find related to make
> > > config known to everyone. Could you please point to documentation?
> >
> > Right. And there is no proper answer to this, which makes it clear that
> > a config option is not the right tool to use.
> >
> > >> And if someone enables this option then _ALL_ platforms which utilize
> > >> cpu_khz_from_msr() are affected. How is that any different from your
> > >> previous approach? This works on local kernels where you build for a
> > >> specific platform and you know exactly what you're doing, but not for
> > >> general consumption. What should a distro do with this option?
> > >>
> > >>
> > > TSC frequency is already calculated in cpu_khz_from_msr() function
> > > before setting these flags.
> >
> > Your mail client does some horrible formatting this zig-zag is
> > unreadable. I'm reformatting the paragraphs below.
> >
>
> Sorry for that. Need to set formatting for reply.
>
> >
> > > This patch return the same calculated TSC frequency but skipping
> > > those two flags. On the basis of these flags, we decide whether we
> > > skip the refined calibration and directly register it as a clocksource
> > > or use refine tsc freq calibration in init_tsc_clocksource()
> > > function. By default this config is disabled and if user wants to use
> > > refine tsc freq calibration() then only user will enable it otherwise
> > > it will go with existing implementations. So, I don't think so it will
> > > break for other ATOM SoC.
> >
> > It does. I explained most of the following to you in an earlier mail
> > already. Let me try again.
> >
> > If X86_FEATURE_TSC_RELIABLE is not set, then the TSC requires a watchdog
> > clocksource. But some of those SoCs do not have anything else than TSC,
> > so there is no watchdog available. As a consequence the TSC is not
> > usable for high resolution timers and NOHZ. That breaks existing systems
> > whether you like it or not.
> >
> > If X86_FEATURE_TSC_KNOWN_FREQUENCY is not set, then this delays the
> > usability of the TSC for high res and NOHZ until the refined calibration
> > figured out that it can't calibrate. And no, we can't know that it does
> > not work upfront when the early TSC init happens. Clearing this flag
> > will not break functionality, but it changes the behaviour on boot-time
> > optimized systems which can obviously be considered breakage.
> >
> > So no, having a config knob which might be turned on and turning working
> > systems into trainwrecks is simply not the way to go.
> >
>
> Thanks Thomas for clarifying about reliable and known frequency flags.
>
> >
> > What can be done is to have a command line option which enforces refined
> > calibration and that option can turn off X86_FEATURE_TSC_KNOWN_FREQUENCY,
> > but nothing else.
> >
>
> Sure Thomas, will make implementation as per your suggestion.
>
> Regards,
> Vipul
>
> >
> > > Check the cpu_khz_from_msr() function.
> >
> > I know that code.
> >
> > > In cpu_khz_from_msr() function we are setting
> > > X86_FEATURE_TSC_KNOWN_FREQ and X86_FEATURE_TSC_RELIABLE for all the
> > > SoC's but in native_calibrate_tsc(), we check for vendor == INTEL and
> > > CPUID > 0x15 and then at the end of function, will enable
> > > X86_FEATURE_TSC_RELIABLE for INTEL_FAM6_ATOM_GOLDMONT SoC.
> > >
> > > Do we need to set the same flag in two different functions as it will be
> > > set in cpu_khz_from_msr() for all SoCs ?
> >
> > cpu_khz_from_msr() does not handle INTEL_FAM6_ATOM_GOLDMONT or can you
> > find that in tsc_msr_cpu_ids[]? Making half informed claims is not
> > solving anything.
> >
> > Thanks,
> >
> > tglx
> >
> > 8<------------------
> >
> > --- a/arch/x86/kernel/tsc_msr.c
> > +++ b/arch/x86/kernel/tsc_msr.c
> > @@ -94,16 +94,20 @@ unsigned long cpu_khz_from_msr(void)
> > if (freq_desc->msr_plat) {
> > rdmsr(MSR_PLATFORM_INFO, lo, hi);
> > ratio = (lo >> 8) & 0xff;
> > + pr_info("MSR_PINFO: %08x%08x -> %u\n", hi, lo, ratio);
> > } else {
> > rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
> > ratio = (hi >> 8) & 0x1f;
> > + pr_info("MSR_PSTAT: %08x%08x -> %u\n", hi, lo, ratio);
> > }
> >
> > /* Get FSB FREQ ID */
> > rdmsr(MSR_FSB_FREQ, lo, hi);
> > + pr_info("MSR_FSBF: %08x%08x\n", hi, lo);
> >
> > /* Map CPU reference clock freq ID(0-7) to CPU reference clock
> > freq(KHz) */
> > freq = freq_desc->freqs[lo & 0x7];
> > + pr_info("REF_CLOCK: %08x\n", freq);
> >
> > /* TSC frequency = maximum resolved freq * maximum resolved bus
> > ratio */
> > res = freq * ratio;
> >
> root@localhost:# dmesg
> [ 0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
> [ 0.000000] Linux version 4.14.139-rt66 (builder@vipul) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT RT Thu Jan 23 11:04:55 UTC 2020
> [ 0.000000] Command line: rootwait quiet rootflags=i_version ima_tcb ima_appraise=enforce ima_appraise_tcb nohz=off splash plymouth.ignore-serial-consoles quiet root=/dev/mapper/system-systema
>
> [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x000000000008ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7af2fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000b7af3000-0x00000000b8402fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000b8403000-0x00000000b8502fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000b8503000-0x00000000b8542fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000b8543000-0x00000000b93c2fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000b93c3000-0x00000000b9cc2fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000b9cc3000-0x00000000b9ffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] e820: update [mem 0xb43d3018-0xb43e3057] usable ==> usable
> [ 0.000000] e820: update [mem 0xb43d3018-0xb43e3057] usable ==> usable
> [ 0.000000] extended physical RAM map:
> [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
> [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x000000000008ffff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b43d3017] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b43d3018-0x00000000b43e3057] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b43e3058-0x00000000b7af2fff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b7af3000-0x00000000b8402fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000b8403000-0x00000000b8502fff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x00000000b8503000-0x00000000b8542fff] ACPI data
> [ 0.000000] reserve setup_data: [mem 0x00000000b8543000-0x00000000b93c2fff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b93c3000-0x00000000b9cc2fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000b9cc3000-0x00000000b9ffffff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023fffffff] usable
> [ 0.000000] efi: EFI v2.40 by INSYDE Corp.
> [ 0.000000] efi: ACPI 2.0=0xb8542014 ESRT=0xb7be2d18 SMBIOS=0xb7dfa000
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: SIEMENS AG SIMATIC IPC227E/A5E38155677, BIOS V20.01.12 04/05/2019
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
> [ 0.000000] 1 base 000000000 mask F80000000 write-back
> [ 0.000000] 2 base 080000000 mask FC0000000 write-back
> [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
> [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
> [ 0.000000] 5 base 0BAE00000 mask FFFE00000 uncachable
> [ 0.000000] 6 base 100000000 mask F00000000 write-back
> [ 0.000000] 7 base 200000000 mask FC0000000 write-back
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
> [ 0.000000] Base memory trampoline at [ffff9b900008a000] 8a000 size 24576
> [ 0.000000] BRK [0x1ced18000, 0x1ced18fff] PGTABLE
> [ 0.000000] BRK [0x1ced19000, 0x1ced19fff] PGTABLE
> [ 0.000000] BRK [0x1ced1a000, 0x1ced1afff] PGTABLE
> [ 0.000000] BRK [0x1ced1b000, 0x1ced1bfff] PGTABLE
> [ 0.000000] BRK [0x1ced1c000, 0x1ced1cfff] PGTABLE
> [ 0.000000] BRK [0x1ced1d000, 0x1ced1dfff] PGTABLE
> [ 0.000000] BRK [0x1ced1e000, 0x1ced1efff] PGTABLE
> [ 0.000000] BRK [0x1ced1f000, 0x1ced1ffff] PGTABLE
> [ 0.000000] BRK [0x1ced20000, 0x1ced20fff] PGTABLE
> [ 0.000000] BRK [0x1ced21000, 0x1ced21fff] PGTABLE
> [ 0.000000] BRK [0x1ced22000, 0x1ced22fff] PGTABLE
> [ 0.000000] Secure boot could not be determined
> [ 0.000000] RAMDISK: [mem 0xadc31000-0xafffffff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000B8542014 000024 (v02 SIEMEN)
> [ 0.000000] ACPI: XSDT 0x00000000B8542120 00009C (v01 SIEMEN SIMATIC 11112222 01000013)
> [ 0.000000] ACPI: FACP 0x00000000B853B000 00010C (v05 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: DSDT 0x00000000B8530000 006A5B (v02 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: FACS 0x00000000B84AA000 000040
> [ 0.000000] ACPI: UEFI 0x00000000B8541000 000236 (v01 SIEMEN SIMATIC 00000001 WAS_ 12345678)
> [ 0.000000] ACPI: TCPA 0x00000000B8540000 000032 (v02 SIEMEN SIMATIC 00000000 WAS_ 00000000)
> [ 0.000000] ACPI: UEFI 0x00000000B853E000 000042 (v01 SIEMEN SIMATIC 00000000 WAS_ 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000B853D000 0004FD (v01 SIEMEN TPMACPI 00001000 WAS_ 20121114)
> [ 0.000000] ACPI: TPM2 0x00000000B853C000 000034 (v03 SIEMEN SIMATIC 00000000 WAS_ 00000000)
> [ 0.000000] ACPI: HPET 0x00000000B853A000 000038 (v01 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: LPIT 0x00000000B8539000 000104 (v01 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: APIC 0x00000000B8538000 000084 (v03 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: MCFG 0x00000000B8537000 00003C (v01 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: SSDT 0x00000000B852E000 000763 (v01 SIEMEN CpuPm 00003000 WAS_ 20121114)
> [ 0.000000] ACPI: SSDT 0x00000000B852D000 000290 (v01 SIEMEN Cpu0Tst 00003000 WAS_ 20121114)
> [ 0.000000] ACPI: SSDT 0x00000000B852C000 00017A (v01 SIEMEN ApTst 00003000 WAS_ 20121114)
> [ 0.000000] ACPI: FPDT 0x00000000B852B000 000044 (v01 SIEMEN SIMATIC 00000002 WAS_ 01000013)
> [ 0.000000] ACPI: BGRT 0x00000000B852F000 000038 (v01 SIEMEN SIMATIC 00000001 WAS_ 12345678)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x23fff7000-0x23fffbfff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
> [ 0.000000] Device empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
> [ 0.000000] node 0: [mem 0x0000000000070000-0x000000000008ffff]
> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7af2fff]
> [ 0.000000] node 0: [mem 0x00000000b8543000-0x00000000b93c2fff]
> [ 0.000000] node 0: [mem 0x00000000b9cc3000-0x00000000b9ffffff]
> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
> [ 0.000000] On node 0 totalpages: 2067518
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 11763 pages used for memmap
> [ 0.000000] DMA32 zone: 752816 pages, LIFO batch:31
> [ 0.000000] Normal zone: 20480 pages used for memmap
> [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
> [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
> [ 0.000000] Reserving Intel graphics memory at 0x00000000bb000000-0x00000000beffffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb43d3000-0xb43d3fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb43e3000-0xb43e3fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb7af3000-0xb8402fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb8403000-0xb8502fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb8503000-0xb8542fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb93c3000-0xb9cc2fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
> [ 0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] percpu: Embedded 226 pages/cpu s886080 r8192 d31424 u1048576
> [ 0.000000] pcpu-alloc: s886080 r8192 d31424 u1048576 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 [0] 2 3
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2035190
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: rootwait quiet rootflags=i_version ima_tcb ima_appraise=enforce ima_appraise_tcb nohz=off splash plymouth.ignore-serial-consoles quiet root=/dev/mapper/system-systema
>
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] Memory: 8008768K/8270072K available (10252K kernel code, 1185K rwdata, 3080K rodata, 2228K init, 856K bss, 261304K reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Kernel/User page tables isolation: enabled
> [ 0.000000] ftrace: allocating 30370 entries in 119 pages
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
> [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
> [ 0.000000] No expedited grace period (rcu_normal_after_boot).
> [ 0.000000] Tasks RCU enabled.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [ 0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.001000] tsc: Detected 1832.600 MHz processor
> [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3665.20 BogoMIPS (lpj=1832600)
> [ 0.001000] pid_max: default: 32768 minimum: 301
> [ 0.001000] ACPI: Core revision 20170728
> [ 0.012153] ACPI: 5 ACPI AML tables successfully acquired and loaded
> [ 0.012232] Security Framework initialized
> [ 0.012234] Yama: becoming mindful.
> [ 0.012268] AppArmor: AppArmor initialized
> [ 0.019782] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes)
> [ 0.027419] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.027539] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.027601] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.028129] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.028131] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [ 0.028143] mce: CPU supports 6 MCE banks
> [ 0.028155] process: using mwait in idle threads
> [ 0.028161] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
> [ 0.028163] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
> [ 0.028165] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [ 0.028168] Spectre V2 : Mitigation: Full generic retpoline
> [ 0.028169] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [ 0.028170] Spectre V2 : Enabling Restricted Speculation for firmware calls
> [ 0.028172] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [ 0.028174] MDS: Mitigation: Clear CPU buffers
> [ 0.028454] Freeing SMP alternatives memory: 20K
> [ 0.029967] smpboot: Max logical packages: 1
> [ 0.031000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.040079] TSC deadline timer enabled
> [ 0.040083] smpboot: CPU0: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (family: 0x6, model: 0x37, stepping: 0x8)
> [ 0.044040] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
> [ 0.044073] ... version: 3
> [ 0.044076] ... bit width: 40
> [ 0.044079] ... generic registers: 2
> [ 0.044082] ... value mask: 000000ffffffffff
> [ 0.044085] ... max period: 0000007fffffffff
> [ 0.044088] ... fixed-purpose events: 3
> [ 0.044090] ... event mask: 0000000700000003
> [ 0.048058] Hierarchical SRCU implementation.
> [ 0.057462] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 0.059020] smp: Bringing up secondary CPUs ...
> [ 0.070078] x86: Booting SMP configuration:
> [ 0.070084] .... node #0, CPUs: #1 #2 #3
> [ 0.096219] smp: Brought up 1 node, 4 CPUs
> [ 0.096219] smpboot: Total of 4 processors activated (14660.80 BogoMIPS)
> [ 0.098400] devtmpfs: initialized
> [ 0.099089] x86/mm: Memory block size: 128MB
> [ 0.104222] random: get_random_bytes called from setup_net+0x4c/0x190 with crng_init=0
> [ 0.104222] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
> [ 0.104222] PM: Registering ACPI NVS region [mem 0xb8403000-0xb8502fff] (1048576 bytes)
> [ 0.104380] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.104436] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 0.104640] pinctrl core: initialized pinctrl subsystem
> [ 0.105685] NET: Registered protocol family 16
> [ 0.106519] cpuidle: using governor ladder
> [ 0.106519] ACPI: bus type PCI registered
> [ 0.106519] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.106519] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
> [ 0.107068] PCI: not using MMCONFIG
> [ 0.107068] PCI: Using configuration type 1 for base access
> [ 0.112224] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> [ 0.113360] ACPI: Added _OSI(Module Device)
> [ 0.113365] ACPI: Added _OSI(Processor Device)
> [ 0.113369] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.113372] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.128124] ACPI: Dynamic OEM Table Load:
> [ 0.128144] ACPI: SSDT 0xFFFF9B9235135400 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20121114)
> [ 0.129424] ACPI: Dynamic OEM Table Load:
> [ 0.129440] ACPI: SSDT 0xFFFF9B92351D1E00 00015F (v01 PmRef ApIst 00003000 INTL 20121114)
> [ 0.132388] ACPI: Interpreter enabled
> [ 0.132448] ACPI: (supports S0 S4 S5)
> [ 0.132453] ACPI: Using IOAPIC for interrupt routing
> [ 0.132555] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
> [ 0.133369] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
> [ 0.133399] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.133992] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.555626] ACPI: Power Resource [USBC] (on)
> [ 0.570268] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.570281] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 0.570710] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
> [ 0.570739] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
> [ 0.571767] PCI host bridge to bus 0000:00
> [ 0.571774] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
> [ 0.571779] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
> [ 0.571784] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.571789] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [ 0.571794] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
> [ 0.571798] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
> [ 0.571803] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd09ffffe window]
> [ 0.571810] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.571827] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
> [ 0.572176] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
> [ 0.572197] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
> [ 0.572212] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
> [ 0.572226] pci 0000:00:02.0: reg 0x20: [io 0x7050-0x7057]
> [ 0.572251] pci 0000:00:02.0: BAR 2: assigned to efifb
> [ 0.572568] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
> [ 0.572595] pci 0000:00:13.0: reg 0x10: [io 0x7048-0x704f]
> [ 0.572608] pci 0000:00:13.0: reg 0x14: [io 0x705c-0x705f]
> [ 0.572620] pci 0000:00:13.0: reg 0x18: [io 0x7040-0x7047]
> [ 0.572632] pci 0000:00:13.0: reg 0x1c: [io 0x7058-0x705b]
> [ 0.572644] pci 0000:00:13.0: reg 0x20: [io 0x7020-0x703f]
> [ 0.572657] pci 0000:00:13.0: reg 0x24: [mem 0xd0904000-0xd09047ff]
> [ 0.572717] pci 0000:00:13.0: PME# supported from D3hot
> [ 0.573042] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
> [ 0.573077] pci 0000:00:1a.0: reg 0x10: [mem 0xd0800000-0xd08fffff]
> [ 0.573094] pci 0000:00:1a.0: reg 0x14: [mem 0xd0700000-0xd07fffff]
> [ 0.573212] pci 0000:00:1a.0: PME# supported from D0 D3hot
> [ 0.573512] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
> [ 0.573544] pci 0000:00:1b.0: reg 0x10: [mem 0xd0900000-0xd0903fff 64bit]
> [ 0.573631] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.573920] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
> [ 0.574000] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.574339] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
> [ 0.574422] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.574735] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
> [ 0.574818] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.575155] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
> [ 0.575237] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 0.575557] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
> [ 0.575593] pci 0000:00:1d.0: reg 0x10: [mem 0xd0905000-0xd09053ff]
> [ 0.575722] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.576051] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
> [ 0.576416] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
> [ 0.576464] pci 0000:00:1f.3: reg 0x10: [mem 0xd0906000-0xd090601f]
> [ 0.576539] pci 0000:00:1f.3: reg 0x20: [io 0x7000-0x701f]
> [ 0.577084] pci 0000:01:00.0: [110a:4078] type 00 class 0x050000
> [ 0.577125] pci 0000:01:00.0: reg 0x10: [mem 0xd0600000-0xd067ffff]
> [ 0.577146] pci 0000:01:00.0: reg 0x14: [mem 0xd0680000-0xd0687fff]
> [ 0.580025] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.580036] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
> [ 0.580224] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
> [ 0.580266] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd057ffff]
> [ 0.580298] pci 0000:02:00.0: reg 0x18: [io 0x6000-0x601f]
> [ 0.580316] pci 0000:02:00.0: reg 0x1c: [mem 0xd0580000-0xd0583fff]
> [ 0.580463] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 0.584024] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.584032] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
> [ 0.584039] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
> [ 0.584220] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
> [ 0.584260] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd047ffff]
> [ 0.584292] pci 0000:03:00.0: reg 0x18: [io 0x5000-0x501f]
> [ 0.584310] pci 0000:03:00.0: reg 0x1c: [mem 0xd0480000-0xd0483fff]
> [ 0.584310] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.587028] pci 0000:00:1c.2: PCI bridge to [bus 03]
> [ 0.587032] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
> [ 0.587038] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff]
> [ 0.587188] pci 0000:00:1c.3: PCI bridge to [bus 04]
> [ 0.792690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.792941] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793184] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793627] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793849] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.794099] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.794320] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.795333] pci 0000:00:02.0: vgaarb: setting as boot VGA device
> [ 0.795333] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [ 0.795333] pci 0000:00:02.0: vgaarb: bridge control possible
> [ 0.795333] vgaarb: loaded
> [ 0.795333] pps_core: LinuxPPS API ver. 1 registered
> [ 0.795333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it>
> [ 0.795333] PTP clock support registered
> [ 0.795333] EDAC MC: Ver: 3.0.0
> [ 0.796089] Registered efivars operations
> [ 0.796204] PCI: Using ACPI for IRQ routing
> [ 0.797938] PCI: pci_cache_line_size set to 64 bytes
> [ 0.798064] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
> [ 0.798072] e820: reserve RAM buffer [mem 0xb43d3018-0xb7ffffff]
> [ 0.798077] e820: reserve RAM buffer [mem 0xb7af3000-0xb7ffffff]
> [ 0.798082] e820: reserve RAM buffer [mem 0xb93c3000-0xbbffffff]
> [ 0.798088] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
> [ 0.800595] clocksource: Switched to clocksource refined-jiffies
> [ 0.858946] VFS: Disk quotas dquot_6.6.0
> [ 0.858991] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.859709] AppArmor: AppArmor Filesystem Enabled
> [ 0.859779] pnp: PnP ACPI init
> [ 0.859979] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.860373] system 00:01: [io 0x0680-0x069f] has been reserved
> [ 0.860382] system 00:01: [io 0x0400-0x047f] has been reserved
> [ 0.860389] system 00:01: [io 0x0500-0x05fe] has been reserved
> [ 0.860407] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.860881] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.861333] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 1.064797] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
> [ 1.064806] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
> [ 1.064814] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
> [ 1.064821] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
> [ 1.064828] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved
> [ 1.064835] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
> [ 1.064835] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
> [ 1.064835] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
> [ 1.064835] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
> [ 1.064835] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved
> [ 1.064835] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.064835] pnp: PnP ACPI: found 5 devices
> [ 1.076608] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 1.076986] clocksource: Switched to clocksource acpi_pm
> [ 1.076986] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
> [ 1.076986] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
> [ 1.076986] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
> [ 1.076986] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
> [ 1.076986] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
> [ 1.076986] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
> [ 1.076986] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
> [ 1.076986] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
> [ 1.076986] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
> [ 1.076986] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
> [ 1.076986] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
> [ 1.076986] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
> [ 1.076986] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
> [ 1.076986] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076986] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077409] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077415] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077423] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 1.077429] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 1.077437] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
> [ 1.077447] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 1.077452] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
> [ 1.077459] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
> [ 1.077469] pci 0000:00:1c.2: PCI bridge to [bus 03]
> [ 1.077474] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
> [ 1.077484] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff]
> [ 1.077505] pci 0000:00:1c.3: PCI bridge to [bus 04]
> [ 1.077514] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> [ 1.077528] pci_bus 0000:00: resource 4 [io 0x0000-0x006f window]
> [ 1.077533] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7 window]
> [ 1.077537] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
> [ 1.077542] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
> [ 1.077547] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff window]
> [ 1.077551] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff window]
> [ 1.077556] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd09ffffe window]
> [ 1.077560] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
> [ 1.077565] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
> [ 1.077570] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
> [ 1.077575] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
> [ 1.077579] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
> [ 1.077584] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
> [ 1.077588] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
> [ 1.077841] NET: Registered protocol family 2
> [ 1.078642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
> [ 1.081159] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
> [ 1.082450] TCP: Hash tables configured (established 65536 bind 65536)
> [ 1.082942] UDP hash table entries: 4096 (order: 7, 524288 bytes)
> [ 1.083526] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes)
> [ 1.083907] NET: Registered protocol family 1
> [ 1.083953] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 2.307105] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
> [ 2.307499] PCI: CLS 64 bytes, default 64
> [ 2.307698] Unpacking initramfs...
> [ 3.863476] Freeing initrd memory: 36668K
> [ 3.863485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 3.863491] software IO TLB: mapped [mem 0xb03d3000-0xb43d3000] (64MB)
> [ 3.863609] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x34d4ebe4b98, max_idle_ns: 881590735674 ns
> [ 3.863665] clocksource: Switched to clocksource tsc
> [ 3.864915] audit: initializing netlink subsys (disabled)
> [ 3.865083] audit: type=2000 audit(1579782171.864:1): state=initialized audit_enabled=0 res=1
> [ 3.866736] workingset: timestamp_bits=40 max_order=21 bucket_order=0
> [ 3.874245] zbud: loaded
> [ 4.765970] Key type asymmetric registered
> [ 4.765976] Asymmetric key parser 'x509' registered
> [ 4.766187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [ 4.766311] io scheduler noop registered
> [ 4.766316] io scheduler deadline registered
> [ 4.766340] io scheduler cfq registered (default)
> [ 4.766345] io scheduler mq-deadline registered
> [ 4.768175] efifb: probing for efifb
> [ 4.768215] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
> [ 4.768219] efifb: mode is 1024x768x32, linelength=4096, pages=1
> [ 4.768222] efifb: scrolling: redraw
> [ 4.768226] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 4.773901] Console: switching to colour frame buffer device 128x48
> [ 4.779263] fb0: EFI VGA frame buffer device
> [ 4.779297] intel_idle: MWAIT substates: 0x33000020
> [ 4.779302] intel_idle: v0.4.1 model 0x37
> [ 4.779310] intel_idle: intel_idle_state_table_update BYT 0x37 reached
> [ 4.779313] intel_idle: byt_idle_state_table_update reached
> [ 4.779317] intel_idle: state C6N is disabled
> [ 4.779320] intel_idle: state C6S is disabled
> [ 4.779323] intel_idle: state C7 is disabled
> [ 4.779326] intel_idle: state C7S is disabled
> [ 4.779674] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 4.789625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 4.789809] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a TI16750
> [ 4.790140] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a TI16750
> [ 4.791434] Linux agpgart interface v0.103
> [ 4.807830] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
> [ 5.225802] AMD IOMMUv2 driver by Joerg Roedel <jroedel(a)suse.de>
> [ 5.225807] AMD IOMMUv2 functionality not available on this system
> [ 5.235438] loop: module loaded
> [ 5.235637] i8042: PNP: No PS/2 controller found.
> [ 5.235641] i8042: Probing ports directly.
> [ 5.236512] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 5.236656] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 5.237091] mousedev: PS/2 mouse device common for all mice
> [ 5.237433] rtc_cmos 00:00: RTC can wake from S4
> [ 5.237785] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
> [ 5.237911] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
> [ 5.237948] intel_pstate: Intel P-state driver initializing
> [ 5.240962] pmc_atom: SIMATIC IPC227E critclks quirk enabled
> [ 5.244166] NET: Registered protocol family 10
> [ 5.267172] Segment Routing with IPv6
> [ 5.267238] mip6: Mobile IPv6
> [ 5.267248] NET: Registered protocol family 17
> [ 5.267266] mpls_gso: MPLS GSO support
> [ 5.268247] microcode: sig=0x30678, pf=0x8, revision=0x838
> [ 5.268482] microcode: Microcode Update Driver: v2.2.
> [ 5.268526] sched_clock: Marking stable (5268463229, 0)->(5284772362, -16309133)
> [ 5.269207] registered taskstats version 1
> [ 5.269326] zswap: loaded using pool lzo/zbud
> [ 5.269465] AppArmor: AppArmor sha1 policy hashing enabled
> [ 5.290880] ima: Allocated hash algorithm: sha256
> [ 5.483333] rtc_cmos 00:00: setting system clock to 2020-01-23 12:22:54 UTC (1579782174)
> [ 5.497555] Freeing unused kernel memory: 2228K
> [ 5.497566] Write protecting the kernel read-only data: 16384k
> [ 5.501268] Freeing unused kernel memory: 2024K
> [ 5.506952] Freeing unused kernel memory: 1016K
> [ 5.517886] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 5.517890] x86/mm: Checking user space page tables
> [ 5.528533] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 7.264890] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
> [ 7.280245] ACPI: Sleep Button [SLPB]
> [ 7.313607] SCSI subsystem initialized
> [ 7.333157] ACPI: bus type USB registered
> [ 7.342823] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
> [ 7.347944] usbcore: registered new interface driver usbfs
> [ 7.352374] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 7.353696] usbcore: registered new interface driver hub
> [ 7.354498] usbcore: registered new device driver usb
> [ 7.356061] ACPI: Power Button [PWRF]
> [ 7.377690] libata version 3.00 loaded.
> [ 7.414682] dca service started, version 1.12.1
> [ 7.438308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 7.571896] ehci-pci: EHCI PCI platform driver
> [ 7.572361] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 7.572379] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 7.572400] ehci-pci 0000:00:1d.0: debug port 2
> [ 7.573535] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
> [ 7.573539] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 7.576346] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 7.576523] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd0905000
> [ 7.584162] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 7.584413] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 7.584420] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 7.584426] usb usb1: Product: EHCI Host Controller
> [ 7.584432] usb usb1: Manufacturer: Linux 4.14.139-rt66 ehci_hcd
> [ 7.584437] usb usb1: SerialNumber: 0000:00:1d.0
> [ 7.585192] hub 1-0:1.0: USB hub found
> [ 7.585226] hub 1-0:1.0: 8 ports detected
> [ 7.590495] [drm] Memory usable by graphics device = 2048M
> [ 7.590511] checking generic (c0000000 300000) vs hw (c0000000 10000000)
> [ 7.590521] fb: switching to inteldrmfb from EFI VGA
> [ 7.590631] Console: switching to colour dummy device 80x25
> [ 7.591813] [drm] Replacing VGA console driver
> [ 7.592829] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 7.592838] [drm] Driver supports precise vblank timestamp query.
> [ 7.596552] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 7.603431] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
> [ 7.606166] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 7.606919] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
> [ 7.607395] ahci 0000:00:13.0: version 3.0
> [ 7.607857] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
> [ 7.618697] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
> [ 7.618708] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso
> [ 7.620442] scsi host0: ahci
> [ 7.621120] scsi host1: ahci
> [ 7.621433] ata1: SATA max UDMA/133 abar m2048@0xd0904000 port 0xd0904100 irq 88
> [ 7.621439] ata2: DUMMY
> [ 7.728937] fbcon: inteldrmfb (fb0) is primary device
> [ 7.784490] Console: switching to colour frame buffer device 240x67
> [ 7.809697] pps pps0: new PPS source ptp0
> [ 7.809705] igb 0000:02:00.0: added PHC on eth0
> [ 7.809709] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
> [ 7.809714] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 20:87:56:31:c5:0c
> [ 7.809758] igb 0000:02:00.0: eth0: PBA No: 000300-000
> [ 7.809762] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
> [ 7.826702] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 7.905112] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 7.934247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 7.935785] ata1.00: ATA-10: Micron_5100_MTFDDAK240TCB, D0MU037, max UDMA/133
> [ 7.935791] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 7.937914] ata1.00: configured for UDMA/133
> [ 7.938270] scsi 0:0:0:0: Direct-Access ATA Micron_5100_MTFD U037 PQ: 0 ANSI: 5
> [ 7.974092] ata1.00: Enabling discard_zeroes_data
> [ 7.974560] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
> [ 7.974564] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 7.974605] sd 0:0:0:0: [sda] Write Protect is off
> [ 7.974608] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 7.974680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 7.975140] ata1.00: Enabling discard_zeroes_data
> [ 7.977983] sda: sda1 sda2 sda3 sda4
> [ 7.978984] ata1.00: Enabling discard_zeroes_data
> [ 7.979510] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 8.033403] usb 1-1: New USB device found, idVendor=8087, idProduct=07e6
> [ 8.033411] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 8.038203] hub 1-1:1.0: USB hub found
> [ 8.038280] hub 1-1:1.0: 4 ports detected
> [ 8.050401] pps pps1: new PPS source ptp1
> [ 8.050408] igb 0000:03:00.0: added PHC on eth1
> [ 8.050412] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
> [ 8.050416] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 20:87:56:31:c5:06
> [ 8.050460] igb 0000:03:00.0: eth1: PBA No: 000300-000
> [ 8.050464] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
> [ 8.067473] igb 0000:02:00.0 enp2s0: renamed from eth0
> [ 8.074248] igb 0000:03:00.0 enp3s0: renamed from eth1
> [ 8.311138] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
> [ 8.345283] random: lvm: uninitialized urandom read (4 bytes read)
> [ 8.390544] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2514
> [ 8.390552] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 8.391047] hub 1-1.2:1.0: USB hub found
> [ 8.391166] hub 1-1.2:1.0: 4 ports detected
> [ 8.421224] device-mapper: uevent: version 1.0.3
> [ 8.421963] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel(a)redhat.com
> [ 8.456089] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
> [ 8.471697] random: lvm: uninitialized urandom read (2 bytes read)
> [ 8.539867] usb 1-1.3: New USB device found, idVendor=413c, idProduct=301a
> [ 8.539873] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 8.539878] usb 1-1.3: Product: Dell MS116 USB Optical Mouse
> [ 8.539881] usb 1-1.3: Manufacturer: PixArt
> [ 8.567534] hidraw: raw HID events driver (C) Jiri Kosina
> [ 8.591691] usbcore: registered new interface driver usbhid
> [ 8.591698] usbhid: USB HID core driver
> [ 8.606085] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
> [ 8.625980] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:301A.0001/input/input6
> [ 8.626720] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
> [ 8.692570] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2113
> [ 8.692585] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 8.692594] usb 1-1.4: Product: Dell KB216 Wired Keyboard
> [ 8.699556] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2113.0002/input/input7
> [ 8.752456] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:1d.0-1.4/input0
> [ 8.760277] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2113.0003/input/input8
> [ 8.763063] usb 1-1.2.4: new high-speed USB device number 6 using ehci-pci
> [ 8.812510] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:1d.0-1.4/input1
> [ 8.857158] usb 1-1.2.4: New USB device found, idVendor=0781, idProduct=5581
> [ 8.857177] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 8.857190] usb 1-1.2.4: Product: Ultra
> [ 8.857201] usb 1-1.2.4: Manufacturer: SanDisk
> [ 8.857213] usb 1-1.2.4: SerialNumber: 04018812802fe8c3affb6e4ff14c9072616e7bdcf156e4641ccc688d0ccd13340aa400000000000000000000c1ca173b001a0818815581079d275241
> [ 8.904607] usb-storage 1-1.2.4:1.0: USB Mass Storage device detected
> [ 8.905482] scsi host2: usb-storage 1-1.2.4:1.0
> [ 8.906380] usbcore: registered new interface driver usb-storage
> [ 8.937344] usbcore: registered new interface driver uas
> [ 9.953369] scsi 2:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
> [ 9.957618] sd 2:0:0:0: [sdb] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
> [ 9.959602] sd 2:0:0:0: [sdb] Write Protect is off
> [ 9.959607] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
> [ 9.960718] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 9.977778] GPT:Primary header thinks Alt. header is not at the end of the disk.
> [ 9.977789] GPT:14877681 != 120176639
> [ 9.977794] GPT:Alternate GPT header not at the end of the disk.
> [ 9.977800] GPT:14877681 != 120176639
> [ 9.977804] GPT: Use GNU Parted to correct GPT errors.
> [ 9.977852] sdb: sdb1 sdb2
> [ 9.983397] sd 2:0:0:0: [sdb] Attached SCSI removable disk
> [ 14.708900] NET: Registered protocol family 38
> [ 17.482198] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 25.648558] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 33.739683] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 41.853499] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 44.892110] random: lvm: uninitialized urandom read (4 bytes read)
> [ 45.636922] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: i_version
> [ 46.119594] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
> [ 46.122171] EXT4-fs (dm-7): mounted filesystem with journalled data mode. Opts: data=journal
> [ 47.457269] audit: type=1805 audit(1579782216.472:2): action="dont_appraise" fsmagic="0x9fa0" res=1
> [ 47.457285] audit: type=1805 audit(1579782216.472:3): action="dont_appraise" fsmagic="0x62656572" res=1
> [ 47.457296] audit: type=1805 audit(1579782216.472:4): action="dont_appraise" fsmagic="0x64626720" res=1
> [ 47.457305] audit: type=1805 audit(1579782216.472:5): action="dont_appraise" fsmagic="0x1021994" res=1
> [ 47.457317] audit: type=1805 audit(1579782216.472:6): action="dont_appraise" fsmagic="0x858458f6" res=1
> [ 47.457329] audit: type=1805 audit(1579782216.472:7): action="dont_appraise" fsmagic="0x1cd1" res=1
> [ 47.457367] audit: type=1805 audit(1579782216.472:8): action="dont_appraise" fsmagic="0x42494e4d" res=1
> [ 47.457378] audit: type=1805 audit(1579782216.472:9): action="dont_appraise" fsmagic="0x73636673" res=1
> [ 47.457388] audit: type=1805 audit(1579782216.472:10): action="dont_appraise" fsmagic="0xf97cff8c" res=1
> [ 47.457424] audit: type=1805 audit(1579782216.472:11): action="dont_appraise" fsmagic="0x43415d53" res=1
> [ 47.457580] systemd[1]: Successfully loaded the IMA custom policy /etc/ima/ima-policy.
> [ 47.457603] IMA: policy update completed
> [ 47.534320] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 47.595810] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
> [ 47.609184] systemd[1]: Detected architecture x86-64.
> [ 47.617495] systemd[1]: Set hostname to <localhost.localdomain>.
> [ 47.619885] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
> [ 47.954124] systemd[1]: /run/systemd/generator.late/squid.service:21: PIDFile= references path below legacy directory /var/run/, updating /var/run/squid.pid → /run/squid.pid; please update the unit file accordingly.
> [ 47.959208] systemd[1]: Listening on fsck to fsckd communication Socket.
> [ 47.960291] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [ 47.962620] systemd[1]: Created slice User and Session Slice.
> [ 47.962666] systemd[1]: Reached target Slices.
> [ 47.962735] systemd[1]: Reached target Swap.
> [ 48.105328] random: lvm: uninitialized urandom read (4 bytes read)
> [ 48.163805] Non-volatile memory driver v1.3
> [ 48.295496] random: systemd-random-: uninitialized urandom read (512 bytes read)
> [ 49.042161] systemd-journald[501]: Received request to flush runtime journal from PID 1
> [ 49.449539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 49.750708] iTCO_vendor_support: vendor-support=0
> [ 49.792209] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [ 49.795400] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
> [ 49.800408] input: PC Speaker as /devices/platform/pcspkr/input/input9
> [ 49.831550] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 49.838335] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 49.854453] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [ 49.992642] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [ 50.000803] igb 0000:02:00.0 factorylan0: renamed from enp2s0
> [ 50.010276] igb 0000:03:00.0 machinelan0: renamed from enp3s0
> [ 50.362232] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 50.425199] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 50.538093] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [ 50.581117] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [ 50.646200] random: lvm: uninitialized urandom read (4 bytes read)
> [ 50.721210] intel_rapl: Found RAPL domain package
> [ 50.721217] intel_rapl: Found RAPL domain core
> [ 52.216273] EXT4-fs (dm-6): mounted filesystem with journalled data mode. Opts: data=journal
> [ 52.294842] EXT4-fs (dm-8): mounted filesystem with journalled data mode. Opts: data=journal
> [ 56.369802] IPv6: ADDRCONF(NETDEV_UP): factorylan0: link is not ready
> [ 56.425587] IPv6: ADDRCONF(NETDEV_UP): factorylan0: link is not ready
> [ 56.438514] IPv6: ADDRCONF(NETDEV_UP): machinelan0: link is not ready
> [ 56.491600] IPv6: ADDRCONF(NETDEV_UP): machinelan0: link is not ready
> [ 56.932663] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
> [ 59.569636] igb 0000:03:00.0 machinelan0: igb: machinelan0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> [ 59.671360] IPv6: ADDRCONF(NETDEV_CHANGE): machinelan0: link becomes ready
> [ 67.803769] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
> [ 67.808889] Bridge firewalling registered
> [ 67.836843] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
> [ 68.088408] Initializing XFRM netlink socket
> [ 68.103161] Netfilter messages via NETLINK v0.30.
> [ 68.109737] ctnetlink v0.93: registering with nfnetlink.
> [ 68.353599] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
> root@localhost:#
> root@localhost:# dmesg | grep tsc
> [ 0.001000] tsc: Detected 1832.600 MHz processor
> [ 3.863609] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x34d4ebe4b98, max_idle_ns: 881590735674 ns
> [ 3.863665] clocksource: Switched to clocksource tsc
>
> root@localhost# dmesg
> [ 0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22
> [ 0.000000] Linux version 4.14.139-rt66 (builder@vipul) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT RT Mon Jan 20 07:36:20 UTC 2020
> [ 0.000000] Command line: rootwait quiet rootflags=i_version ima_tcb ima_appraise=enforce ima_appraise_tcb nohz=off splash plymouth.ignore-serial-consoles quiet root=/dev/mapper/system-systema
>
> [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x000000000008ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7af2fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000b7af3000-0x00000000b8402fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000b8403000-0x00000000b8502fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000b8503000-0x00000000b8542fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000b8543000-0x00000000b93c2fff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000b93c3000-0x00000000b9cc2fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000b9cc3000-0x00000000b9ffffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] e820: update [mem 0xb43d3018-0xb43e3057] usable ==> usable
> [ 0.000000] e820: update [mem 0xb43d3018-0xb43e3057] usable ==> usable
> [ 0.000000] extended physical RAM map:
> [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
> [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x000000000008ffff] usable
> [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b43d3017] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b43d3018-0x00000000b43e3057] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b43e3058-0x00000000b7af2fff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b7af3000-0x00000000b8402fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000b8403000-0x00000000b8502fff] ACPI NVS
> [ 0.000000] reserve setup_data: [mem 0x00000000b8503000-0x00000000b8542fff] ACPI data
> [ 0.000000] reserve setup_data: [mem 0x00000000b8543000-0x00000000b93c2fff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000b93c3000-0x00000000b9cc2fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000b9cc3000-0x00000000b9ffffff] usable
> [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
> [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
> [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023fffffff] usable
> [ 0.000000] efi: EFI v2.40 by INSYDE Corp.
> [ 0.000000] efi: ACPI 2.0=0xb8542014 ESRT=0xb7be2d18 SMBIOS=0xb7dfa000
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: SIEMENS AG SIMATIC IPC227E/A5E38155677, BIOS V20.01.12 04/05/2019
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
> [ 0.000000] 1 base 000000000 mask F80000000 write-back
> [ 0.000000] 2 base 080000000 mask FC0000000 write-back
> [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
> [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
> [ 0.000000] 5 base 0BAE00000 mask FFFE00000 uncachable
> [ 0.000000] 6 base 100000000 mask F00000000 write-back
> [ 0.000000] 7 base 200000000 mask FC0000000 write-back
> [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
> [ 0.000000] Base memory trampoline at [ffff9a110008a000] 8a000 size 24576
> [ 0.000000] BRK [0xa4118000, 0xa4118fff] PGTABLE
> [ 0.000000] BRK [0xa4119000, 0xa4119fff] PGTABLE
> [ 0.000000] BRK [0xa411a000, 0xa411afff] PGTABLE
> [ 0.000000] BRK [0xa411b000, 0xa411bfff] PGTABLE
> [ 0.000000] BRK [0xa411c000, 0xa411cfff] PGTABLE
> [ 0.000000] BRK [0xa411d000, 0xa411dfff] PGTABLE
> [ 0.000000] BRK [0xa411e000, 0xa411efff] PGTABLE
> [ 0.000000] BRK [0xa411f000, 0xa411ffff] PGTABLE
> [ 0.000000] BRK [0xa4120000, 0xa4120fff] PGTABLE
> [ 0.000000] BRK [0xa4121000, 0xa4121fff] PGTABLE
> [ 0.000000] BRK [0xa4122000, 0xa4122fff] PGTABLE
> [ 0.000000] BRK [0xa4123000, 0xa4123fff] PGTABLE
> [ 0.000000] Secure boot could not be determined
> [ 0.000000] RAMDISK: [mem 0xadc30000-0xafffffff]
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000B8542014 000024 (v02 SIEMEN)
> [ 0.000000] ACPI: XSDT 0x00000000B8542120 00009C (v01 SIEMEN SIMATIC 11112222 01000013)
> [ 0.000000] ACPI: FACP 0x00000000B853B000 00010C (v05 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: DSDT 0x00000000B8530000 006A5B (v02 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: FACS 0x00000000B84AA000 000040
> [ 0.000000] ACPI: UEFI 0x00000000B8541000 000236 (v01 SIEMEN SIMATIC 00000001 WAS_ 12345678)
> [ 0.000000] ACPI: TCPA 0x00000000B8540000 000032 (v02 SIEMEN SIMATIC 00000000 WAS_ 00000000)
> [ 0.000000] ACPI: UEFI 0x00000000B853E000 000042 (v01 SIEMEN SIMATIC 00000000 WAS_ 00000000)
> [ 0.000000] ACPI: SSDT 0x00000000B853D000 0004FD (v01 SIEMEN TPMACPI 00001000 WAS_ 20121114)
> [ 0.000000] ACPI: TPM2 0x00000000B853C000 000034 (v03 SIEMEN SIMATIC 00000000 WAS_ 00000000)
> [ 0.000000] ACPI: HPET 0x00000000B853A000 000038 (v01 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: LPIT 0x00000000B8539000 000104 (v01 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: APIC 0x00000000B8538000 000084 (v03 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: MCFG 0x00000000B8537000 00003C (v01 SIEMEN SIMATIC 11112222 WAS_ 00010001)
> [ 0.000000] ACPI: SSDT 0x00000000B852E000 000763 (v01 SIEMEN CpuPm 00003000 WAS_ 20121114)
> [ 0.000000] ACPI: SSDT 0x00000000B852D000 000290 (v01 SIEMEN Cpu0Tst 00003000 WAS_ 20121114)
> [ 0.000000] ACPI: SSDT 0x00000000B852C000 00017A (v01 SIEMEN ApTst 00003000 WAS_ 20121114)
> [ 0.000000] ACPI: FPDT 0x00000000B852B000 000044 (v01 SIEMEN SIMATIC 00000002 WAS_ 01000013)
> [ 0.000000] ACPI: BGRT 0x00000000B852F000 000038 (v01 SIEMEN SIMATIC 00000001 WAS_ 12345678)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
> [ 0.000000] NODE_DATA(0) allocated [mem 0x23fff8000-0x23fffcfff]
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
> [ 0.000000] Device empty
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
> [ 0.000000] node 0: [mem 0x0000000000070000-0x000000000008ffff]
> [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7af2fff]
> [ 0.000000] node 0: [mem 0x00000000b8543000-0x00000000b93c2fff]
> [ 0.000000] node 0: [mem 0x00000000b9cc3000-0x00000000b9ffffff]
> [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
> [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
> [ 0.000000] On node 0 totalpages: 2067518
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 11763 pages used for memmap
> [ 0.000000] DMA32 zone: 752816 pages, LIFO batch:31
> [ 0.000000] Normal zone: 20480 pages used for memmap
> [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
> [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
> [ 0.000000] Reserving Intel graphics memory at 0x00000000bb000000-0x00000000beffffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb43d3000-0xb43d3fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb43e3000-0xb43e3fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb7af3000-0xb8402fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb8403000-0xb8502fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb8503000-0xb8542fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xb93c3000-0xb9cc2fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
> [ 0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] percpu: Embedded 226 pages/cpu s886080 r8192 d31424 u1048576
> [ 0.000000] pcpu-alloc: s886080 r8192 d31424 u1048576 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 [0] 2 3
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2035190
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: rootwait quiet rootflags=i_version ima_tcb ima_appraise=enforce ima_appraise_tcb nohz=off splash plymouth.ignore-serial-consoles quiet root=/dev/mapper/system-systema
>
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] Memory: 8008768K/8270072K available (10252K kernel code, 1185K rwdata, 3080K rodata, 2228K init, 856K bss, 261304K reserved, 0K cma-reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Kernel/User page tables isolation: enabled
> [ 0.000000] ftrace: allocating 30370 entries in 119 pages
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
> [ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
> [ 0.000000] No expedited grace period (rcu_normal_after_boot).
> [ 0.000000] Tasks RCU enabled.
> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
> [ 0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
> [ 0.000000] Console: colour dummy device 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.001000] tsc: Detected 1832.600 MHz processor
> [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3665.20 BogoMIPS (lpj=1832600)
> [ 0.001000] pid_max: default: 32768 minimum: 301
> [ 0.001000] ACPI: Core revision 20170728
> [ 0.012101] ACPI: 5 ACPI AML tables successfully acquired and loaded
> [ 0.012179] Security Framework initialized
> [ 0.012182] Yama: becoming mindful.
> [ 0.012215] AppArmor: AppArmor initialized
> [ 0.019713] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes)
> [ 0.027394] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.027516] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.027579] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.028104] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
> [ 0.028105] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
> [ 0.028117] mce: CPU supports 6 MCE banks
> [ 0.028129] process: using mwait in idle threads
> [ 0.028135] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
> [ 0.028136] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
> [ 0.028139] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [ 0.028143] Spectre V2 : Mitigation: Full generic retpoline
> [ 0.028143] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [ 0.028145] Spectre V2 : Enabling Restricted Speculation for firmware calls
> [ 0.028147] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [ 0.028148] MDS: Mitigation: Clear CPU buffers
> [ 0.028427] Freeing SMP alternatives memory: 20K
> [ 0.029965] smpboot: Max logical packages: 1
> [ 0.031000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.040077] TSC deadline timer enabled
> [ 0.040082] smpboot: CPU0: Intel(R) Celeron(R) CPU N2930 @ 1.83GHz (family: 0x6, model: 0x37, stepping: 0x8)
> [ 0.044041] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
> [ 0.044073] ... version: 3
> [ 0.044076] ... bit width: 40
> [ 0.044078] ... generic registers: 2
> [ 0.044081] ... value mask: 000000ffffffffff
> [ 0.044084] ... max period: 0000007fffffffff
> [ 0.044087] ... fixed-purpose events: 3
> [ 0.044090] ... event mask: 0000000700000003
> [ 0.048058] Hierarchical SRCU implementation.
> [ 0.057463] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 0.059020] smp: Bringing up secondary CPUs ...
> [ 0.070076] x86: Booting SMP configuration:
> [ 0.070082] .... node #0, CPUs: #1 #2 #3
> [ 0.096219] smp: Brought up 1 node, 4 CPUs
> [ 0.096219] smpboot: Total of 4 processors activated (14660.80 BogoMIPS)
> [ 0.098407] devtmpfs: initialized
> [ 0.099095] x86/mm: Memory block size: 128MB
> [ 0.104223] random: get_random_bytes called from setup_net+0x4c/0x190 with crng_init=0
> [ 0.104223] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
> [ 0.104223] PM: Registering ACPI NVS region [mem 0xb8403000-0xb8502fff] (1048576 bytes)
> [ 0.104380] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.104437] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 0.104641] pinctrl core: initialized pinctrl subsystem
> [ 0.105691] NET: Registered protocol family 16
> [ 0.106528] cpuidle: using governor ladder
> [ 0.106528] ACPI: bus type PCI registered
> [ 0.106528] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.106528] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
> [ 0.107068] PCI: not using MMCONFIG
> [ 0.107068] PCI: Using configuration type 1 for base access
> [ 0.112226] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
> [ 0.114359] ACPI: Added _OSI(Module Device)
> [ 0.114364] ACPI: Added _OSI(Processor Device)
> [ 0.114368] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.114372] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.129992] ACPI: Dynamic OEM Table Load:
> [ 0.130029] ACPI: SSDT 0xFFFF9A13351A7800 0003BC (v01 PmRef Cpu0Ist 00003000 INTL 20121114)
> [ 0.131292] ACPI: Dynamic OEM Table Load:
> [ 0.131308] ACPI: SSDT 0xFFFF9A1335158400 00015F (v01 PmRef ApIst 00003000 INTL 20121114)
> [ 0.134265] ACPI: Interpreter enabled
> [ 0.134325] ACPI: (supports S0 S4 S5)
> [ 0.134331] ACPI: Using IOAPIC for interrupt routing
> [ 0.134432] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
> [ 0.135239] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
> [ 0.135270] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.135864] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.556549] ACPI: Power Resource [USBC] (on)
> [ 0.571159] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.571172] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [ 0.571603] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
> [ 0.571632] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
> [ 0.572665] PCI host bridge to bus 0000:00
> [ 0.572672] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
> [ 0.572677] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
> [ 0.572682] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.572687] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [ 0.572691] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
> [ 0.572696] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
> [ 0.572700] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd09ffffe window]
> [ 0.572707] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.572724] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
> [ 0.573073] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
> [ 0.573093] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
> [ 0.573108] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
> [ 0.573122] pci 0000:00:02.0: reg 0x20: [io 0x7050-0x7057]
> [ 0.573147] pci 0000:00:02.0: BAR 2: assigned to efifb
> [ 0.573468] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
> [ 0.573495] pci 0000:00:13.0: reg 0x10: [io 0x7048-0x704f]
> [ 0.573507] pci 0000:00:13.0: reg 0x14: [io 0x705c-0x705f]
> [ 0.573520] pci 0000:00:13.0: reg 0x18: [io 0x7040-0x7047]
> [ 0.573532] pci 0000:00:13.0: reg 0x1c: [io 0x7058-0x705b]
> [ 0.573544] pci 0000:00:13.0: reg 0x20: [io 0x7020-0x703f]
> [ 0.573556] pci 0000:00:13.0: reg 0x24: [mem 0xd0904000-0xd09047ff]
> [ 0.573616] pci 0000:00:13.0: PME# supported from D3hot
> [ 0.573918] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
> [ 0.573953] pci 0000:00:1a.0: reg 0x10: [mem 0xd0800000-0xd08fffff]
> [ 0.573969] pci 0000:00:1a.0: reg 0x14: [mem 0xd0700000-0xd07fffff]
> [ 0.574104] pci 0000:00:1a.0: PME# supported from D0 D3hot
> [ 0.574412] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
> [ 0.574444] pci 0000:00:1b.0: reg 0x10: [mem 0xd0900000-0xd0903fff 64bit]
> [ 0.574531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.574821] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
> [ 0.574905] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.575237] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
> [ 0.575320] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.575633] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
> [ 0.575716] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.576044] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
> [ 0.576127] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> [ 0.576444] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
> [ 0.576480] pci 0000:00:1d.0: reg 0x10: [mem 0xd0905000-0xd09053ff]
> [ 0.576609] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.576917] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
> [ 0.577295] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
> [ 0.577343] pci 0000:00:1f.3: reg 0x10: [mem 0xd0906000-0xd090601f]
> [ 0.577419] pci 0000:00:1f.3: reg 0x20: [io 0x7000-0x701f]
> [ 0.577949] pci 0000:01:00.0: [110a:4078] type 00 class 0x050000
> [ 0.577991] pci 0000:01:00.0: reg 0x10: [mem 0xd0600000-0xd067ffff]
> [ 0.578027] pci 0000:01:00.0: reg 0x14: [mem 0xd0680000-0xd0687fff]
> [ 0.581024] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.581035] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
> [ 0.581217] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
> [ 0.581258] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd057ffff]
> [ 0.581290] pci 0000:02:00.0: reg 0x18: [io 0x6000-0x601f]
> [ 0.581309] pci 0000:02:00.0: reg 0x1c: [mem 0xd0580000-0xd0583fff]
> [ 0.581309] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> [ 0.584024] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.584032] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
> [ 0.584038] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
> [ 0.584211] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
> [ 0.584252] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd047ffff]
> [ 0.584283] pci 0000:03:00.0: reg 0x18: [io 0x5000-0x501f]
> [ 0.584302] pci 0000:03:00.0: reg 0x1c: [mem 0xd0480000-0xd0483fff]
> [ 0.584447] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [ 0.588023] pci 0000:00:1c.2: PCI bridge to [bus 03]
> [ 0.588031] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
> [ 0.588038] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff]
> [ 0.588187] pci 0000:00:1c.3: PCI bridge to [bus 04]
> [ 0.793195] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793665] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.793887] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.794134] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
> [ 0.794357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.794577] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
> [ 0.794797] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
> [ 0.795820] pci 0000:00:02.0: vgaarb: setting as boot VGA device
> [ 0.795820] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [ 0.795820] pci 0000:00:02.0: vgaarb: bridge control possible
> [ 0.795820] vgaarb: loaded
> [ 0.796141] pps_core: LinuxPPS API ver. 1 registered
> [ 0.796145] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it>
> [ 0.796156] PTP clock support registered
> [ 0.796202] EDAC MC: Ver: 3.0.0
> [ 0.796414] Registered efivars operations
> [ 0.796414] PCI: Using ACPI for IRQ routing
> [ 0.798406] PCI: pci_cache_line_size set to 64 bytes
> [ 0.798515] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
> [ 0.798522] e820: reserve RAM buffer [mem 0xb43d3018-0xb7ffffff]
> [ 0.798527] e820: reserve RAM buffer [mem 0xb7af3000-0xb7ffffff]
> [ 0.798532] e820: reserve RAM buffer [mem 0xb93c3000-0xbbffffff]
> [ 0.798538] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
> [ 0.800732] clocksource: Switched to clocksource refined-jiffies
> [ 0.859223] VFS: Disk quotas dquot_6.6.0
> [ 0.859280] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.859949] AppArmor: AppArmor Filesystem Enabled
> [ 0.860037] pnp: PnP ACPI init
> [ 0.860239] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.860633] system 00:01: [io 0x0680-0x069f] has been reserved
> [ 0.860641] system 00:01: [io 0x0400-0x047f] has been reserved
> [ 0.860649] system 00:01: [io 0x0500-0x05fe] has been reserved
> [ 0.860667] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.861148] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.861570] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 1.063984] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
> [ 1.063994] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
> [ 1.064001] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
> [ 1.064008] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
> [ 1.064015] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved
> [ 1.064022] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
> [ 1.064030] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
> [ 1.064037] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
> [ 1.064044] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
> [ 1.064051] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved
> [ 1.064070] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 1.064612] pnp: PnP ACPI: found 5 devices
> [ 1.076790] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 1.076977] clocksource: Switched to clocksource acpi_pm
> [ 1.076977] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
> [ 1.076977] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
> [ 1.076977] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
> [ 1.076977] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
> [ 1.076977] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
> [ 1.076977] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
> [ 1.076977] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
> [ 1.076977] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076977] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.076977] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.076977] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077208] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077215] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077229] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
> [ 1.077234] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
> [ 1.077256] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077262] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077274] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
> [ 1.077285] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
> [ 1.077302] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
> [ 1.077308] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
> [ 1.077330] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077335] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077357] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077362] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077384] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077390] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077411] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
> [ 1.077417] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
> [ 1.077424] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 1.077430] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 1.077437] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
> [ 1.077448] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 1.077453] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
> [ 1.077460] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff]
> [ 1.077470] pci 0000:00:1c.2: PCI bridge to [bus 03]
> [ 1.077475] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
> [ 1.077482] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd04fffff]
> [ 1.077492] pci 0000:00:1c.3: PCI bridge to [bus 04]
> [ 1.077497] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> [ 1.077511] pci_bus 0000:00: resource 4 [io 0x0000-0x006f window]
> [ 1.077516] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7 window]
> [ 1.077520] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
> [ 1.077525] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
> [ 1.077530] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff window]
> [ 1.077534] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff window]
> [ 1.077539] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd09ffffe window]
> [ 1.077544] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
> [ 1.077548] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
> [ 1.077553] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
> [ 1.077558] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
> [ 1.077562] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
> [ 1.077567] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
> [ 1.077572] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
> [ 1.077819] NET: Registered protocol family 2
> [ 1.078615] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
> [ 1.081158] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
> [ 1.082455] TCP: Hash tables configured (established 65536 bind 65536)
> [ 1.082955] UDP hash table entries: 4096 (order: 7, 524288 bytes)
> [ 1.083530] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes)
> [ 1.083926] NET: Registered protocol family 1
> [ 1.083973] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 2.293104] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
> [ 2.293507] PCI: CLS 64 bytes, default 64
> [ 2.293720] Unpacking initramfs...
> [ 3.849375] Freeing initrd memory: 36672K
> [ 3.849384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 3.849389] software IO TLB: mapped [mem 0xb03d3000-0xb43d3000] (64MB)
> [ 3.850852] audit: initializing netlink subsys (disabled)
> [ 3.851124] audit: type=2000 audit(1579779453.850:1): state=initialized audit_enabled=0 res=1
> [ 3.852811] workingset: timestamp_bits=40 max_order=21 bucket_order=0
> [ 3.860637] zbud: loaded
> [ 4.781454] Key type asymmetric registered
> [ 4.781461] Asymmetric key parser 'x509' registered
> [ 4.781625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [ 4.781777] io scheduler noop registered
> [ 4.781782] io scheduler deadline registered
> [ 4.781807] io scheduler cfq registered (default)
> [ 4.781812] io scheduler mq-deadline registered
> [ 4.783771] efifb: probing for efifb
> [ 4.783810] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
> [ 4.783815] efifb: mode is 1024x768x32, linelength=4096, pages=1
> [ 4.783817] efifb: scrolling: redraw
> [ 4.783821] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 4.789833] Console: switching to colour frame buffer device 128x48
> [ 4.795515] fb0: EFI VGA frame buffer device
> [ 4.795551] intel_idle: MWAIT substates: 0x33000020
> [ 4.795555] intel_idle: v0.4.1 model 0x37
> [ 4.795563] intel_idle: intel_idle_state_table_update BYT 0x37 reached
> [ 4.795566] intel_idle: byt_idle_state_table_update reached
> [ 4.795570] intel_idle: state C6N is disabled
> [ 4.795573] intel_idle: state C6S is disabled
> [ 4.795577] intel_idle: state C7 is disabled
> [ 4.795579] intel_idle: state C7S is disabled
> [ 4.795975] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 4.806494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 4.806692] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a TI16750
> [ 4.807130] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a TI16750
> [ 4.808544] Linux agpgart interface v0.103
> [ 4.825212] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
> [ 4.895129] tsc: Refined TSC clocksource calibration: 1833.333 MHz
> [ 4.895196] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x34da54753aa, max_idle_ns: 881590618787 ns
> [ 5.242969] AMD IOMMUv2 driver by Joerg Roedel <jroedel(a)suse.de>
> [ 5.242974] AMD IOMMUv2 functionality not available on this system
> [ 5.253443] loop: module loaded
> [ 5.253643] i8042: PNP: No PS/2 controller found.
> [ 5.253647] i8042: Probing ports directly.
> [ 5.254696] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 5.254835] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 5.255359] mousedev: PS/2 mouse device common for all mice
> [ 5.255647] rtc_cmos 00:00: RTC can wake from S4
> [ 5.256165] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
> [ 5.256325] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
> [ 5.256361] intel_pstate: Intel P-state driver initializing
> [ 5.259552] pmc_atom: SIMATIC IPC227E critclks quirk enabled
> [ 5.262904] NET: Registered protocol family 10
> [ 5.288902] Segment Routing with IPv6
> [ 5.288959] mip6: Mobile IPv6
> [ 5.288968] NET: Registered protocol family 17
> [ 5.288983] mpls_gso: MPLS GSO support
> [ 5.290144] microcode: sig=0x30678, pf=0x8, revision=0x838
> [ 5.290400] microcode: Microcode Update Driver: v2.2.
> [ 5.290440] sched_clock: Marking stable (5290383624, 0)->(5307267426, -16883802)
> [ 5.291113] registered taskstats version 1
> [ 5.291208] zswap: loaded using pool lzo/zbud
> [ 5.291321] AppArmor: AppArmor sha1 policy hashing enabled
> [ 5.307572] ima: Allocated hash algorithm: sha256
> [ 5.496426] rtc_cmos 00:00: setting system clock to 2020-01-23 11:37:35 UTC (1579779455)
> [ 5.511262] Freeing unused kernel memory: 2228K
> [ 5.511270] Write protecting the kernel read-only data: 16384k
> [ 5.514988] Freeing unused kernel memory: 2024K
> [ 5.520939] Freeing unused kernel memory: 1016K
> [ 5.532218] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 5.532222] x86/mm: Checking user space page tables
> [ 5.543163] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 5.904409] clocksource: Switched to clocksource tsc
> [ 7.067537] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
> [ 7.067577] ACPI: Sleep Button [SLPB]
> [ 7.068184] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 7.072102] ACPI: Power Button [PWRF]
> [ 7.278653] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
> [ 7.278922] ACPI: bus type USB registered
> [ 7.284861] usbcore: registered new interface driver usbfs
> [ 7.292620] usbcore: registered new interface driver hub
> [ 7.295421] SCSI subsystem initialized
> [ 7.295876] usbcore: registered new device driver usb
> [ 7.298236] dca service started, version 1.12.1
> [ 7.362661] libata version 3.00 loaded.
> [ 7.385579] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
> [ 7.385584] igb: Copyright (c) 2007-2014 Intel Corporation.
> [ 7.401118] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 7.510462] ehci-pci: EHCI PCI platform driver
> [ 7.510946] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 7.510961] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 7.510982] ehci-pci 0000:00:1d.0: debug port 2
> [ 7.514993] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 7.515453] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd0905000
> [ 7.522131] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 7.522512] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 7.522522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 7.522529] usb usb1: Product: EHCI Host Controller
> [ 7.522535] usb usb1: Manufacturer: Linux 4.14.139-rt66 ehci_hcd
> [ 7.522541] usb usb1: SerialNumber: 0000:00:1d.0
> [ 7.523380] hub 1-0:1.0: USB hub found
> [ 7.523422] hub 1-0:1.0: 8 ports detected
> [ 7.527906] [drm] Memory usable by graphics device = 2048M
> [ 7.527913] checking generic (c0000000 300000) vs hw (c0000000 10000000)
> [ 7.527917] fb: switching to inteldrmfb from EFI VGA
> [ 7.527970] Console: switching to colour dummy device 80x25
> [ 7.528620] [drm] Replacing VGA console driver
> [ 7.529224] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 7.529227] [drm] Driver supports precise vblank timestamp query.
> [ 7.530713] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 7.539108] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
> [ 7.542442] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 7.543159] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
> [ 7.543504] ahci 0000:00:13.0: version 3.0
> [ 7.544866] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
> [ 7.555182] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
> [ 7.555193] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso
> [ 7.556960] scsi host0: ahci
> [ 7.557620] scsi host1: ahci
> [ 7.557929] ata1: SATA max UDMA/133 abar m2048@0xd0904000 port 0xd0904100 irq 88
> [ 7.557935] ata2: DUMMY
> [ 7.624548] pps pps0: new PPS source ptp0
> [ 7.624563] igb 0000:02:00.0: added PHC on eth0
> [ 7.624572] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
> [ 7.624582] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 20:87:56:31:c5:0c
> [ 7.624634] igb 0000:02:00.0: eth0: PBA No: 000300-000
> [ 7.624643] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
> [ 7.663725] fbcon: inteldrmfb (fb0) is primary device
> [ 7.715912] Console: switching to colour frame buffer device 240x67
> [ 7.752821] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 7.849108] usb 1-1: new high-speed USB device number 2 using ehci-pci
> [ 7.862245] pps pps1: new PPS source ptp1
> [ 7.862252] igb 0000:03:00.0: added PHC on eth1
> [ 7.862256] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
> [ 7.862260] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 20:87:56:31:c5:06
> [ 7.862303] igb 0000:03:00.0: eth1: PBA No: 000300-000
> [ 7.862308] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
> [ 7.869343] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 7.870113] igb 0000:02:00.0 enp2s0: renamed from eth0
> [ 7.870864] ata1.00: ATA-10: Micron_5100_MTFDDAK240TCB, D0MU037, max UDMA/133
> [ 7.870869] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [ 7.872982] ata1.00: configured for UDMA/133
> [ 7.873448] scsi 0:0:0:0: Direct-Access ATA Micron_5100_MTFD U037 PQ: 0 ANSI: 5
> [ 7.876337] igb 0000:03:00.0 enp3s0: renamed from eth1
> [ 7.927678] ata1.00: Enabling discard_zeroes_data
> [ 7.927918] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
> [ 7.927921] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 7.927962] sd 0:0:0:0: [sda] Write Protect is off
> [ 7.927965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 7.928086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 7.928580] ata1.00: Enabling discard_zeroes_data
> [ 7.932119] sda: sda1 sda2 sda3 sda4
> [ 7.933294] ata1.00: Enabling discard_zeroes_data
> [ 7.933745] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 7.977410] usb 1-1: New USB device found, idVendor=8087, idProduct=07e6
> [ 7.977418] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 7.977925] hub 1-1:1.0: USB hub found
> [ 7.978055] hub 1-1:1.0: 4 ports detected
> [ 8.255098] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
> [ 8.287909] random: lvm: uninitialized urandom read (4 bytes read)
> [ 8.333412] usb 1-1.2: New USB device found, idVendor=0424, idProduct=2514
> [ 8.333421] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 8.334095] hub 1-1.2:1.0: USB hub found
> [ 8.334287] hub 1-1.2:1.0: 4 ports detected
> [ 8.360743] device-mapper: uevent: version 1.0.3
> [ 8.361140] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel(a)redhat.com
> [ 8.400062] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
> [ 8.414458] random: lvm: uninitialized urandom read (2 bytes read)
> [ 8.483918] usb 1-1.3: New USB device found, idVendor=413c, idProduct=301a
> [ 8.483926] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 8.483931] usb 1-1.3: Product: Dell MS116 USB Optical Mouse
> [ 8.483936] usb 1-1.3: Manufacturer: PixArt
> [ 8.512842] hidraw: raw HID events driver (C) Jiri Kosina
> [ 8.536324] usbcore: registered new interface driver usbhid
> [ 8.536329] usbhid: USB HID core driver
> [ 8.549051] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
> [ 8.564722] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:301A.0001/input/input6
> [ 8.565486] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
> [ 8.635160] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2113
> [ 8.635167] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 8.635171] usb 1-1.4: Product: Dell KB216 Wired Keyboard
> [ 8.640453] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2113.0002/input/input7
> [ 8.693432] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:1d.0-1.4/input0
> [ 8.700294] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:413C:2113.0003/input/input8
> [ 8.705097] usb 1-1.2.4: new high-speed USB device number 6 using ehci-pci
> [ 8.752218] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:1d.0-1.4/input1
> [ 8.797190] usb 1-1.2.4: New USB device found, idVendor=0781, idProduct=5581
> [ 8.797206] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 8.797216] usb 1-1.2.4: Product: Ultra
> [ 8.797225] usb 1-1.2.4: Manufacturer: SanDisk
> [ 8.797235] usb 1-1.2.4: SerialNumber: 04018812802fe8c3affb6e4ff14c9072616e7bdcf156e4641ccc688d0ccd13340aa400000000000000000000c1ca173b001a0818815581079d275241
> [ 8.839864] usb-storage 1-1.2.4:1.0: USB Mass Storage device detected
> [ 8.840644] scsi host2: usb-storage 1-1.2.4:1.0
> [ 8.841311] usbcore: registered new interface driver usb-storage
> [ 8.880219] usbcore: registered new interface driver uas
> [ 9.889263] scsi 2:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
> [ 9.892272] sd 2:0:0:0: [sdb] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
> [ 9.893800] sd 2:0:0:0: [sdb] Write Protect is off
> [ 9.893813] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
> [ 9.895222] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 9.916779] GPT:Primary header thinks Alt. header is not at the end of the disk.
> [ 9.916791] GPT:14877691 != 120176639
> [ 9.916798] GPT:Alternate GPT header not at the end of the disk.
> [ 9.916804] GPT:14877691 != 120176639
> [ 9.916809] GPT: Use GNU Parted to correct GPT errors.
> [ 9.916867] sdb: sdb1 sdb2
> [ 9.922154] sd 2:0:0:0: [sdb] Attached SCSI removable disk
> [ 14.715297] NET: Registered protocol family 38
> [ 17.437791] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 25.557261] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 33.658071] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 41.752577] random: cryptsetup: uninitialized urandom read (2 bytes read)
> [ 44.817298] random: lvm: uninitialized urandom read (4 bytes read)
> [ 45.573555] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: i_version
> [ 46.013797] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
> [ 46.016488] EXT4-fs (dm-7): mounted filesystem with journalled data mode. Opts: data=journal
> [ 47.319423] audit: type=1805 audit(1579779497.322:2): action="dont_appraise" fsmagic="0x9fa0" res=1
> [ 47.319439] audit: type=1805 audit(1579779497.322:3): action="dont_appraise" fsmagic="0x62656572" res=1
> [ 47.319450] audit: type=1805 audit(1579779497.322:4): action="dont_appraise" fsmagic="0x64626720" res=1
> [ 47.319460] audit: type=1805 audit(1579779497.322:5): action="dont_appraise" fsmagic="0x1021994" res=1
> [ 47.319474] audit: type=1805 audit(1579779497.322:6): action="dont_appraise" fsmagic="0x858458f6" res=1
> [ 47.319490] audit: type=1805 audit(1579779497.322:7): action="dont_appraise" fsmagic="0x1cd1" res=1
> [ 47.319531] audit: type=1805 audit(1579779497.322:8): action="dont_appraise" fsmagic="0x42494e4d" res=1
> [ 47.319544] audit: type=1805 audit(1579779497.322:9): action="dont_appraise" fsmagic="0x73636673" res=1
> [ 47.319558] audit: type=1805 audit(1579779497.322:10): action="dont_appraise" fsmagic="0xf97cff8c" res=1
> [ 47.319586] audit: type=1805 audit(1579779497.322:11): action="dont_appraise" fsmagic="0x43415d53" res=1
> [ 47.319735] systemd[1]: Successfully loaded the IMA custom policy /etc/ima/ima-policy.
> [ 47.319758] IMA: policy update completed
> [ 47.366386] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 47.437980] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
> [ 47.451240] systemd[1]: Detected architecture x86-64.
> [ 47.457586] systemd[1]: Set hostname to <localhost.localdomain>.
> [ 47.459459] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
> [ 47.818194] systemd[1]: /run/systemd/generator.late/squid.service:21: PIDFile= references path below legacy directory /var/run/, updating /var/run/squid.pid → /run/squid.pid; please update the unit file accordingly.
> [ 47.827355] systemd[1]: Created slice system-getty.slice.
> [ 47.828000] systemd[1]: Listening on udev Kernel Socket.
> [ 47.828420] systemd[1]: Listening on fsck to fsckd communication Socket.
> [ 47.828862] systemd[1]: Listening on Journal Socket (/dev/log).
> [ 47.829710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [ 47.996814] random: lvm: uninitialized urandom read (4 bytes read)
> [ 48.050142] Non-volatile memory driver v1.3
> [ 48.316925] random: systemd-random-: uninitialized urandom read (512 bytes read)
> [ 48.494669] random: mktemp: uninitialized urandom read (6 bytes read)
> [ 49.056503] systemd-journald[503]: Received request to flush runtime journal from PID 1
> [ 49.337143] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 49.847951] input: PC Speaker as /devices/platform/pcspkr/input/input9
> [ 49.946847] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 50.014119] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [ 50.168891] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [ 50.215517] igb 0000:02:00.0 factorylan0: renamed from enp2s0
> [ 50.254803] igb 0000:03:00.0 machinelan0: renamed from enp3s0
> [ 50.318608] iTCO_vendor_support: vendor-support=0
> [ 50.377676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
> [ 50.380349] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
> [ 50.455705] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 50.705168] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> [ 50.753973] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 50.833744] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [ 50.866327] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [ 50.955750] intel_rapl: Found RAPL domain package
> [ 50.955757] intel_rapl: Found RAPL domain core
> [ 52.482335] EXT4-fs (dm-6): mounted filesystem with journalled data mode. Opts: data=journal
> [ 52.557641] EXT4-fs (dm-8): mounted filesystem with journalled data mode. Opts: data=journal
> [ 55.920244] IPv6: ADDRCONF(NETDEV_UP): factorylan0: link is not ready
> [ 55.978874] IPv6: ADDRCONF(NETDEV_UP): factorylan0: link is not ready
> [ 55.995905] IPv6: ADDRCONF(NETDEV_UP): machinelan0: link is not ready
> [ 56.049581] IPv6: ADDRCONF(NETDEV_UP): machinelan0: link is not ready
> [ 58.981633] igb 0000:03:00.0 machinelan0: igb: machinelan0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> [ 59.087351] IPv6: ADDRCONF(NETDEV_CHANGE): machinelan0: link becomes ready
> [ 66.389565] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
> [ 66.395634] Bridge firewalling registered
> [ 66.431249] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
> [ 66.671647] Initializing XFRM netlink socket
> [ 66.684553] Netfilter messages via NETLINK v0.30.
> [ 66.689312] ctnetlink v0.93: registering with nfnetlink.
> [ 66.963230] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
> root@localhost:/home/mentor#
> root@localhost:# dmesg | grep tsc
> [ 0.001000] tsc: Detected 1832.600 MHz processor
> [ 4.895129] tsc: Refined TSC clocksource calibration: 1833.333 MHz
> [ 4.895196] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x34da54753aa, max_idle_ns: 881590618787 ns
> [ 5.904409] clocksource: Switched to clocksource tsc
>
--
With Best Regards,
Andy Shevchenko
4 years, 9 months
- 6
- 21
[PATCH 1/6] hwrng: imx-rngc - fix an error path
by Martin Kaiser
Make sure that the rngc interrupt is masked if the rngc self test fails.
Self test failure means that probe fails as well. Interrupts should be
masked in this case, regardless of the error.
Cc: stable(a)vger.kernel.org
Fixes: 1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Signed-off-by: Martin Kaiser <martin(a)kaiser.cx>
---
drivers/char/hw_random/imx-rngc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/char/hw_random/imx-rngc.c b/drivers/char/hw_random/imx-rngc.c
index 30cf00f8e9a0..0576801944fd 100644
--- a/drivers/char/hw_random/imx-rngc.c
+++ b/drivers/char/hw_random/imx-rngc.c
@@ -105,8 +105,10 @@ static int imx_rngc_self_test(struct imx_rngc *rngc)
return -ETIMEDOUT;
}
- if (rngc->err_reg != 0)
+ if (rngc->err_reg != 0) {
+ imx_rngc_irq_mask_clear(rngc);
return -EIO;
+ }
return 0;
}
--
2.20.1
4 years, 9 months
- 2
- 1
[PATCH 5.4 00/78] 5.4.12-stable review
by Greg Kroah-Hartman
This is the start of the stable review cycle for the 5.4.12 release.
There are 78 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Linux 5.4.12-rc1
Florian Westphal <fw(a)strlen.de>
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
Florian Westphal <fw(a)strlen.de>
netfilter: conntrack: dccp, sctp: handle null timeout argument
Florian Westphal <fw(a)strlen.de>
netfilter: arp_tables: init netns pointer in xt_tgchk_param struct
Tony Lindgren <tony(a)atomide.com>
phy: cpcap-usb: Fix flakey host idling and enumerating of devices
Tony Lindgren <tony(a)atomide.com>
phy: cpcap-usb: Fix error path when no host driver is loaded
Alan Stern <stern(a)rowland.harvard.edu>
USB: Fix: Don't skip endpoint descriptors with maxpacket=0
Dmitry Torokhov <dmitry.torokhov(a)gmail.com>
HID: hiddev: fix mess in hiddev_open()
Navid Emamdoost <navid.emamdoost(a)gmail.com>
ath10k: fix memory leak
Navid Emamdoost <navid.emamdoost(a)gmail.com>
rtl8xxxu: prevent leaking urb
Navid Emamdoost <navid.emamdoost(a)gmail.com>
scsi: bfa: release allocated memory in case of error
Navid Emamdoost <navid.emamdoost(a)gmail.com>
rpmsg: char: release allocated memory
Navid Emamdoost <navid.emamdoost(a)gmail.com>
mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf
Ganapathi Bhat <gbhat(a)marvell.com>
mwifiex: fix possible heap overflow in mwifiex_process_country_ie()
Malcolm Priestley <tvboxspy(a)gmail.com>
staging: vt6656: remove bool from vnt_radio_power_on ret
Amanieu d'Antras <amanieu(a)gmail.com>
um: Implement copy_thread_tls
Amanieu d'Antras <amanieu(a)gmail.com>
clone3: ensure copy_thread_tls is implemented
Amanieu d'Antras <amanieu(a)gmail.com>
xtensa: Implement copy_thread_tls
Amanieu d'Antras <amanieu(a)gmail.com>
riscv: Implement copy_thread_tls
Amanieu d'Antras <amanieu(a)gmail.com>
parisc: Implement copy_thread_tls
Amanieu d'Antras <amanieu(a)gmail.com>
arm: Implement copy_thread_tls
Amanieu d'Antras <amanieu(a)gmail.com>
arm64: Implement copy_thread_tls
Amanieu d'Antras <amanieu(a)gmail.com>
arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
Sudip Mukherjee <sudipm.mukherjee(a)gmail.com>
tty: always relink the port
Sudip Mukherjee <sudipm.mukherjee(a)gmail.com>
tty: link tty and port before configuring it as console
Patrick Steinhardt <ps(a)pks.im>
iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
Punit Agrawal <punit1.agrawal(a)toshiba.co.jp>
serdev: Don't claim unsupported ACPI serial devices
Michael Straube <straube.linux(a)gmail.com>
staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21
Malcolm Priestley <tvboxspy(a)gmail.com>
staging: vt6656: limit reg output to block size
Malcolm Priestley <tvboxspy(a)gmail.com>
staging: vt6656: correct return of vnt_init_registers.
Ian Abbott <abbotti(a)mev.co.uk>
staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713
Paul Cercueil <paul(a)crapouillou.net>
usb: musb: dma: Correct parameter passed to IRQ handler
Paul Cercueil <paul(a)crapouillou.net>
usb: musb: Disable pullup at init
Tony Lindgren <tony(a)atomide.com>
usb: musb: fix idling for suspend after disconnect interrupt
Daniele Palmas <dnlplm(a)gmail.com>
USB: serial: option: add ZLP support for 0x1bc7/0x9010
Douglas Gilbert <dgilbert(a)interlog.com>
USB-PD tcpm: bad warning+size, PPS adapters
Colin Ian King <colin.king(a)canonical.com>
usb: ohci-da8xx: ensure error return on variable error is set
Peter Chen <peter.chen(a)nxp.com>
usb: cdns3: should not use the same dev_id for shared interrupt handler
Malcolm Priestley <tvboxspy(a)gmail.com>
staging: vt6656: Fix non zero logical return of, usb_control_msg
Malcolm Priestley <tvboxspy(a)gmail.com>
staging: vt6656: set usb_set_intfdata on driver fail.
Kees Cook <keescook(a)chromium.org>
pstore/ram: Regularize prz label allocation lifetime
Hans de Goede <hdegoede(a)redhat.com>
gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
Hans de Goede <hdegoede(a)redhat.com>
gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
Oliver Hartkopp <socketcan(a)hartkopp.net>
can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs
Florian Faber <faber(a)faberman.de>
can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode
Sean Nyekjaer <sean(a)geanix.com>
can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before register access
Johan Hovold <johan(a)kernel.org>
can: gs_usb: gs_usb_probe(): use descriptors of current altsetting
Johan Hovold <johan(a)kernel.org>
can: kvaser_usb: fix interface sanity check
Kaike Wan <kaike.wan(a)intel.com>
IB/hfi1: Adjust flow PSN with the correct resync_psn
Chris Wilson <chris(a)chris-wilson.co.uk>
drm/i915/gt: Mark up virtual engine uabi_instance
Matt Roper <matthew.d.roper(a)intel.com>
drm/i915: Add Wa_1407352427:icl,ehl
Wayne Lin <Wayne.Lin(a)amd.com>
drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ
Geert Uytterhoeven <geert+renesas(a)glider.be>
drm/fb-helper: Round up bits_per_pixel if possible
Chen-Yu Tsai <wens(a)csie.org>
drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
Alex Deucher <alexander.deucher(a)amd.com>
Revert "drm/amdgpu: Set no-retry as default."
Chunming Zhou <david1.zhou(a)amd.com>
drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu
Matt Roper <matthew.d.roper(a)intel.com>
drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
Arnd Bergmann <arnd(a)arndb.de>
Input: input_event - fix struct padding on sparc64
Dmitry Torokhov <dmitry.torokhov(a)gmail.com>
Input: add safety guards to input_set_keycode()
Dmitry Torokhov <dmitry.torokhov(a)gmail.com>
HID: hid-input: clear unmapped usages
Marcel Holtmann <marcel(a)holtmann.org>
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
Marcel Holtmann <marcel(a)holtmann.org>
HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
Alan Stern <stern(a)rowland.harvard.edu>
HID: Fix slab-out-of-bounds read in hid_field_extract
Joel Fernandes (Google) <joel(a)joelfernandes.org>
tracing: Change offset type to s32 in preempt/irq tracepoints
Steven Rostedt (VMware) <rostedt(a)goodmis.org>
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
Kaitao Cheng <pilgrimtao(a)gmail.com>
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
Chen-Yu Tsai <wens(a)csie.org>
rtc: sun6i: Add support for RTC clocks on R40
Tadeusz Struk <tadeusz.struk(a)intel.com>
tpm: Handle negative priv->response_len in tpm_common_read()
Stefan Berger <stefanb(a)linux.ibm.com>
tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"
Stefan Berger <stefanb(a)linux.ibm.com>
tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"
Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com>
tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"
Kailang Yang <kailang(a)realtek.com>
ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen
Kailang Yang <kailang(a)realtek.com>
ALSA: hda/realtek - Set EAPD control to default for ALC222
Kailang Yang <kailang(a)realtek.com>
ALSA: hda/realtek - Add new codec supported for ALCS1200A
Takashi Iwai <tiwai(a)suse.de>
ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5
Guenter Roeck <linux(a)roeck-us.net>
usb: chipidea: host: Disable port power only if previously enabled
Harry Pan <harry.pan(a)intel.com>
powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
Russell King <rmk+kernel(a)armlinux.org.uk>
i2c: fix bus recovery stop mode timing
Will Deacon <will(a)kernel.org>
chardev: Avoid potential use-after-free in 'chrdev_open()'
-------------
Diffstat:
Makefile | 4 +-
arch/arm/Kconfig | 1 +
arch/arm/kernel/process.c | 6 +-
arch/arm64/Kconfig | 1 +
arch/arm64/include/asm/unistd.h | 1 -
arch/arm64/include/uapi/asm/unistd.h | 1 +
arch/arm64/kernel/process.c | 10 +--
arch/parisc/Kconfig | 1 +
arch/parisc/kernel/process.c | 8 +-
arch/riscv/Kconfig | 1 +
arch/riscv/kernel/process.c | 6 +-
arch/um/Kconfig | 1 +
arch/um/include/asm/ptrace-generic.h | 2 +-
arch/um/kernel/process.c | 6 +-
arch/x86/um/tls_32.c | 6 +-
arch/x86/um/tls_64.c | 7 +-
arch/xtensa/Kconfig | 1 +
arch/xtensa/kernel/process.c | 8 +-
drivers/char/tpm/tpm-dev-common.c | 2 +-
drivers/char/tpm/tpm-dev.h | 2 +-
drivers/char/tpm/tpm_tis_core.c | 34 ++++----
drivers/gpio/gpiolib-acpi.c | 51 ++++++++++--
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 7 +-
drivers/gpu/drm/drm_dp_mst_topology.c | 2 +-
drivers/gpu/drm/drm_fb_helper.c | 7 +-
drivers/gpu/drm/i915/gt/intel_lrc.c | 2 +
drivers/gpu/drm/i915/i915_reg.h | 8 +-
drivers/gpu/drm/i915/intel_pm.c | 11 +++
drivers/gpu/drm/sun4i/sun4i_tcon.c | 15 +++-
drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 +
drivers/hid/hid-core.c | 6 ++
drivers/hid/hid-input.c | 16 +++-
drivers/hid/hidraw.c | 4 +-
drivers/hid/uhid.c | 2 +-
drivers/hid/usbhid/hiddev.c | 97 ++++++++++------------
drivers/i2c/i2c-core-base.c | 13 ++-
drivers/infiniband/hw/hfi1/tid_rdma.c | 9 ++
drivers/input/evdev.c | 14 ++--
drivers/input/input.c | 26 +++---
drivers/input/misc/uinput.c | 14 ++--
drivers/iommu/intel-iommu.c | 9 +-
drivers/net/can/m_can/tcan4x5x.c | 4 +
drivers/net/can/mscan/mscan.c | 21 +++--
drivers/net/can/usb/gs_usb.c | 4 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 2 +-
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 2 +-
drivers/net/wireless/ath/ath10k/usb.c | 1 +
drivers/net/wireless/marvell/mwifiex/pcie.c | 4 +-
drivers/net/wireless/marvell/mwifiex/sta_ioctl.c | 13 ++-
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
drivers/phy/motorola/phy-cpcap-usb.c | 35 ++++----
drivers/powercap/intel_rapl_common.c | 3 +
drivers/rpmsg/rpmsg_char.c | 6 +-
drivers/rtc/rtc-sun6i.c | 16 ++++
drivers/scsi/bfa/bfad_attr.c | 4 +-
drivers/staging/comedi/drivers/adv_pci1710.c | 4 +-
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
drivers/staging/vt6656/baseband.c | 4 +-
drivers/staging/vt6656/card.c | 2 +-
drivers/staging/vt6656/device.h | 1 +
drivers/staging/vt6656/main_usb.c | 3 +-
drivers/staging/vt6656/usbpipe.c | 25 +++++-
drivers/staging/vt6656/usbpipe.h | 5 ++
drivers/staging/vt6656/wcmd.c | 1 +
drivers/tty/serdev/core.c | 10 +++
drivers/tty/serial/serial_core.c | 1 +
drivers/usb/cdns3/gadget.c | 14 ++--
drivers/usb/chipidea/host.c | 4 +-
drivers/usb/core/config.c | 12 ++-
drivers/usb/host/ohci-da8xx.c | 8 +-
drivers/usb/musb/musb_core.c | 11 +++
drivers/usb/musb/musbhsdma.c | 2 +-
drivers/usb/serial/option.c | 8 ++
drivers/usb/serial/usb-wwan.h | 1 +
drivers/usb/serial/usb_wwan.c | 4 +
drivers/usb/typec/tcpm/tcpci.c | 20 +++--
fs/char_dev.c | 2 +-
fs/pstore/ram.c | 4 +-
fs/pstore/ram_core.c | 2 +-
include/linux/can/dev.h | 34 ++++++++
include/trace/events/preemptirq.h | 8 +-
include/uapi/linux/input.h | 1 +
kernel/fork.c | 10 +++
kernel/trace/trace_sched_wakeup.c | 4 +-
kernel/trace/trace_stack.c | 5 ++
net/ipv4/netfilter/arp_tables.c | 27 +++---
net/netfilter/ipset/ip_set_core.c | 3 +-
net/netfilter/nf_conntrack_proto_dccp.c | 3 +
net/netfilter/nf_conntrack_proto_sctp.c | 3 +
sound/pci/hda/patch_realtek.c | 5 ++
sound/usb/quirks.c | 1 +
91 files changed, 547 insertions(+), 245 deletions(-)
4 years, 9 months
- 11
- 105
[PATCH 1/2 v2] perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event map
by Kim Phillips
Commit 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h"),
claimed L2 misses were unsupported, due to them not being found in its
referenced documentation, whose link has now moved [1].
That old documentation listed PMCx064 unit mask bit 3 as:
"LsRdBlkC: LS Read Block C S L X Change to X Miss."
and bit 0 as:
"IcFillMiss: IC Fill Miss"
We now have new public documentation [2] with improved descriptions, that
clearly indicate what events those unit mask bits represent:
Bit 3 now clearly states:
"LsRdBlkC: Data Cache Req Miss in L2 (all types)"
and bit 0 is:
"IcFillMiss: Instruction Cache Req Miss in L2."
So we can now add support for L2 misses in perf's genericised events as
PMCx064 with both the above unit masks.
[1] The commit's original documentation reference, "Processor Programming
Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors",
originally available here:
https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0…
is now available here:
https://developer.amd.com/wordpress/media/2017/11/54945_PPR_Family_17h_Mode…
[2] "Processor Programming Reference (PPR) for Family 17h Model 31h,
Revision B0 Processors", available here:
https://developer.amd.com/wp-content/resources/55803_0.54-PUB.pdf
Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com>
Cc: Andi Kleen <ak(a)linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme(a)kernel.org>
Cc: Babu Moger <babu.moger(a)amd.com>
Cc: Borislav Petkov <bp(a)alien8.de>
Cc: Fenghua Yu <fenghua.yu(a)intel.com>
Cc: Frank van der Linden <fllinden(a)amazon.com>
Cc: H. Peter Anvin <hpa(a)zytor.com>
Cc: Huang Rui <ray.huang(a)amd.com>
Cc: Ingo Molnar <mingo(a)kernel.org>
Cc: Ingo Molnar <mingo(a)redhat.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan(a)amd.com>
Cc: Jan Beulich <jbeulich(a)suse.com>
Cc: Jiaxun Yang <jiaxun.yang(a)flygoat.com>
Cc: Jiri Olsa <jolsa(a)redhat.com>
Cc: Josh Poimboeuf <jpoimboe(a)redhat.com>
Cc: Linus Torvalds <torvalds(a)linux-foundation.org>
Cc: Luwei Kang <luwei.kang(a)intel.com>
Cc: Martin Liška <mliska(a)suse.cz>
Cc: Matt Fleming <matt(a)codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung(a)kernel.org>
Cc: Paolo Bonzini <pbonzini(a)redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta(a)linux.intel.com>
Cc: Peter Zijlstra <peterz(a)infradead.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit(a)amd.com>
Cc: Thomas Gleixner <tglx(a)linutronix.de>
Cc: Tom Lendacky <thomas.lendacky(a)amd.com>
Cc: x86(a)kernel.org
Cc: linux-kernel(a)vger.kernel.org
Cc: stable(a)vger.kernel.org
Reported-by: Babu Moger <babu.moger(a)amd.com>
Tested-by: Babu Moger <babu.moger(a)amd.com>
Fixes: 3fe3331bb285 ("perf/x86/amd: Add event map for AMD Family 17h")
Signed-off-by: Kim Phillips <kim.phillips(a)amd.com>
---
v2: no changes.
arch/x86/events/amd/core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index 1f22b6bbda68..39eb276d0277 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -250,6 +250,7 @@ static const u64 amd_f17h_perfmon_event_map[PERF_COUNT_HW_MAX] =
[PERF_COUNT_HW_CPU_CYCLES] = 0x0076,
[PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
[PERF_COUNT_HW_CACHE_REFERENCES] = 0xff60,
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x0964,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c2,
[PERF_COUNT_HW_BRANCH_MISSES] = 0x00c3,
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x0287,
--
2.25.0
4 years, 9 months
- 2
- 2
[PATCH 4.19 000/321] 4.19.88-stable review
by Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.19.88 release.
There are 321 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 05 Dec 2019 22:30:32 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.88-rc…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Linux 4.19.88-rc1
Hans de Goede <hdegoede(a)redhat.com>
platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
Hans de Goede <hdegoede(a)redhat.com>
platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
Pierre-Yves MORDRET <pierre-yves.mordret(a)st.com>
dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
Wen Yang <yellowriver2010(a)hotmail.com>
ASoC: stm32: sai: add missing put_device()
Olivier Moysan <olivier.moysan(a)st.com>
ASoC: stm32: i2s: fix IRQ clearing
Olivier Moysan <olivier.moysan(a)st.com>
ASoC: stm32: i2s: fix 16 bit format support
Olivier Moysan <olivier.moysan(a)st.com>
ASoC: stm32: i2s: fix dma configuration
Alexandre Torgue <alexandre.torgue(a)st.com>
pinctrl: stm32: fix memory leak issue
Fabien Dessenne <fabien.dessenne(a)st.com>
mailbox: mailbox-test: fix null pointer if no mmio
Gabriel Fernandez <gabriel.fernandez(a)st.com>
clk: stm32mp1: parent clocks update
Gabriel Fernandez <gabriel.fernandez(a)st.com>
clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks
Gabriel Fernandez <gabriel.fernandez(a)st.com>
clk: stm32mp1: fix mcu divider table
Gabriel Fernandez <gabriel.fernandez(a)st.com>
clk: stm32mp1: fix HSI divider flag
Lionel Debieve <lionel.debieve(a)st.com>
hwrng: stm32 - fix unbalanced pm_runtime_enable
Hugues Fruchet <hugues.fruchet(a)st.com>
media: stm32-dcmi: fix check of pm_runtime_get_sync return value
Hugues Fruchet <hugues.fruchet(a)st.com>
media: stm32-dcmi: fix DMA corruption when stopping streaming
Lionel Debieve <lionel.debieve(a)st.com>
crypto: stm32/hash - Fix hmac issue more than 256 bytes
Candle Sun <candle.sun(a)unisoc.com>
HID: core: check whether Usage Page item is after Usage ID items
Yuchung Cheng <ycheng(a)google.com>
tcp: exit if nothing to retransmit on RTO timeout
Arnaud Pouliquen <arnaud.pouliquen(a)st.com>
mailbox: stm32_ipcc: add spinlock to fix channels concurrent access
Claudiu Beznea <claudiu.beznea(a)microchip.com>
drm/atmel-hlcdc: revert shift by 8
huijin.park <huijin.park(a)samsung.com>
mtd: spi-nor: cast to u64 to avoid uint overflows
Wen Yang <yellowriver2010(a)hotmail.com>
mtd: rawnand: atmel: fix possible object reference leak
Miquel Raynal <miquel.raynal(a)bootlin.com>
mtd: rawnand: atmel: Fix spelling mistake in error message
Paul Thomas <pthomas8589(a)gmail.com>
net: macb driver, check for SKBTX_HW_TSTAMP
Harini Katakam <harini.katakam(a)xilinx.com>
net: macb: Fix SUBNS increment and increase resolution
Eugen Hristev <eugen.hristev(a)microchip.com>
watchdog: sama5d4: fix WDD value to be always set to max
Theodore Ts'o <tytso(a)mit.edu>
ext4: add more paranoia checking in ext4_expand_extra_isize handling
Chuhong Yuan <hslester96(a)gmail.com>
net: macb: add missed tasklet_kill
Dust Li <dust.li(a)linux.alibaba.com>
net: sched: fix `tc -s class show` no bstats on class with nolock subqueues
Xin Long <lucien.xin(a)gmail.com>
sctp: cache netns in sctp_ep_common
John Rutherford <john.rutherford(a)dektech.com.au>
tipc: fix link name length check
Jakub Kicinski <jakub.kicinski(a)netronome.com>
selftests: bpf: test_sockmap: handle file creation failures gracefully
Paolo Abeni <pabeni(a)redhat.com>
openvswitch: remove another BUG_ON()
Paolo Abeni <pabeni(a)redhat.com>
openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()
Jouni Hogander <jouni.hogander(a)unikie.com>
slip: Fix use-after-free Read in slip_open
Navid Emamdoost <navid.emamdoost(a)gmail.com>
sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcook
Paolo Abeni <pabeni(a)redhat.com>
openvswitch: fix flow command message size
Nikolay Aleksandrov <nikolay(a)cumulusnetworks.com>
net: psample: fix skb_over_panic
Menglong Dong <dong.menglong(a)zte.com.cn>
macvlan: schedule bc_work even if error
Eugen Hristev <eugen.hristev(a)microchip.com>
media: atmel: atmel-isc: fix INIT_WORK misplacement
Eugen Hristev <eugen.hristev(a)microchip.com>
media: atmel: atmel-isc: fix asd memory allocation
Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
pwm: Clear chip_data in pwm_put()
Luca Ceresoli <luca(a)lucaceresoli.net>
net: macb: fix error format in dev_err()
Eugen Hristev <eugen.hristev(a)microchip.com>
media: v4l2-ctrl: fix flags for DO_WHITE_BALANCE
Steffen Klassert <steffen.klassert(a)secunet.com>
xfrm: Fix memleak on xfrm state destroy
Mika Westerberg <mika.westerberg(a)linux.intel.com>
thunderbolt: Power cycle the router if NVM authentication fails
Alexander Usyskin <alexander.usyskin(a)intel.com>
mei: me: add comet point V device id
Alexander Usyskin <alexander.usyskin(a)intel.com>
mei: bus: prefix device names on bus with the bus name
Fabio D'Urso <fabiodurso(a)hotmail.it>
USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9P
Hans de Goede <hdegoede(a)redhat.com>
staging: rtl8723bs: Add 024c:0525 to the list of SDIO device-ids
Hans de Goede <hdegoede(a)redhat.com>
staging: rtl8723bs: Drop ACPI device ids
Pan Bian <bianpan2016(a)163.com>
staging: rtl8192e: fix potential use after free
Mathias Kresin <dev(a)kresin.me>
usb: dwc2: use a longer core rest timeout in dwc2_core_reset()
Alexandre Belloni <alexandre.belloni(a)bootlin.com>
clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated()
Eugen Hristev <eugen.hristev(a)microchip.com>
clk: at91: fix update bit maps on CFG_MOR write
Sean Christopherson <sean.j.christopherson(a)intel.com>
KVM: nVMX: assimilate nested_vmx_entry_failure() into nested_vmx_enter_non_root_mode()
Sean Christopherson <sean.j.christopherson(a)intel.com>
KVM: nVMX: rename enter_vmx_non_root_mode to nested_vmx_enter_non_root_mode
Vlastimil Babka <vbabka(a)suse.cz>
mm, gup: add missing refcount overflow checks on s390
Boris Brezillon <bbrezillon(a)kernel.org>
mtd: Remove a debug trace in mtdpart.c
Jesper Dangaard Brouer <brouer(a)redhat.com>
xdp: fix cpumap redirect SKB creation bug
Gen Zhang <blackgod016574(a)gmail.com>
powerpc/pseries/dlpar: Fix a missing check in dlpar_parse_cc_property()
Hui Wang <hui.wang(a)canonical.com>
ASoC: rt5645: Headphone Jack sense inverts on the LattePanda board
YueHaibing <yuehaibing(a)huawei.com>
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
Yixian Liu <liuyixian(a)huawei.com>
RDMA/hns: Fix the state of rereg mr
Lijun Ou <oulijun(a)huawei.com>
RDMA/hns: Bugfix for the scene without receiver queue
Lijun Ou <oulijun(a)huawei.com>
RDMA/hns: Fix the bug with updating rq head pointer when flush cqe
John Garry <john.garry(a)huawei.com>
scsi: libsas: Check SMP PHY control function result
Xiang Chen <chenxiang66(a)hisilicon.com>
scsi: hisi_sas: shutdown axi bus to avoid exception CQ returned
James Morse <james.morse(a)arm.com>
ACPI / APEI: Switch estatus pool to use vmalloc memory
James Morse <james.morse(a)arm.com>
ACPI / APEI: Don't wait to serialise with oops messages when panic()ing
John Garry <john.garry(a)huawei.com>
scsi: libsas: Support SATA PHY connection rate unmatch fixing during discovery
Chris Coulson <chris.coulson(a)canonical.com>
apparmor: delete the dentry in aafs_remove() to avoid a leak
Aaron Ma <aaron.ma(a)canonical.com>
iommu/amd: Fix NULL dereference bug in match_hid_uid
Peng Li <lipeng321(a)huawei.com>
net: hns3: fix an issue for hns3_update_new_int_gl
Peng Li <lipeng321(a)huawei.com>
net: hns3: fix an issue for hclgevf_ae_get_hdev
Yunsheng Lin <linyunsheng(a)huawei.com>
net: hns3: fix PFC not setting problem for DCB module
Yunsheng Lin <linyunsheng(a)huawei.com>
net: hns3: Change fw error code NOT_EXEC to NOT_SUPPORTED
Peng Sun <sironhide0null(a)gmail.com>
bpf: drop refcount if bpf_map_new_fd() fails in map_create()
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
kvm: properly check debugfs dentry before using it
Andy Shevchenko <andriy.shevchenko(a)linux.intel.com>
net: dev: Use unsigned integer as an argument to left-shift
Ming Lei <ming.lei(a)redhat.com>
mmc: core: align max segment size with logical block size
Peng Sun <sironhide0null(a)gmail.com>
bpf: decrease usercnt if bpf_map_new_fd() fails in bpf_map_get_fd_by_id()
Maciej Kwiecien <maciej.kwiecien(a)nokia.com>
sctp: don't compare hb_timer expire date before starting it
Lorenzo Bianconi <lorenzo.bianconi(a)redhat.com>
net: ip6_gre: do not report erspan_ver for ip6gre or ip6gretap
Lorenzo Bianconi <lorenzo.bianconi(a)redhat.com>
net: ip_gre: do not report erspan_ver for gre or gretap
Eric Dumazet <edumazet(a)google.com>
net: fix possible overflow in __sk_mem_raise_allocated()
Matteo Croce <mcroce(a)redhat.com>
geneve: change NET_UDP_TUNNEL dependency to select
Bert Kenward <bkenward(a)solarflare.com>
sfc: initialise found bitmap in efx_ef10_mtd_probe
Sylwester Nawrocki <s.nawrocki(a)samsung.com>
ASoC: samsung: i2s: Fix prescaler setting for the secondary DAI
Hoang Le <hoang.h.le(a)dektech.com.au>
tipc: fix skb may be leaky in tipc_link_input
Ursula Braun <ubraun(a)linux.ibm.com>
net/smc: fix byte_order for rx_curs_confirmed
Jan Kara <jack(a)suse.cz>
blktrace: Show requests without sector
Ursula Braun <ubraun(a)linux.ibm.com>
net/smc: fix sender_free computation
Brian Foster <bfoster(a)redhat.com>
xfs: end sync buffer I/O properly on shutdown error
Qian Cai <cai(a)lca.pw>
mm/hotplug: invalid PFNs from pfn_to_online_page()
Karsten Graul <kgraul(a)linux.ibm.com>
net/smc: don't wait for send buffer space when data was already sent
Karsten Graul <kgraul(a)linux.ibm.com>
net/smc: prevent races between smc_lgr_terminate() and smc_conn_free()
Johannes Berg <johannes.berg(a)intel.com>
decnet: fix DN_IFREQ_SIZE
wenxu <wenxu(a)ucloud.cn>
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
Edward Cree <ecree(a)solarflare.com>
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
Lucas Stach <l.stach(a)pengutronix.de>
gpu: ipu-v3: pre: don't trigger update if buffer address doesn't change
He Zhe <zhe.he(a)windriver.com>
serial: 8250: Fix serial8250 initialization crash
Konstantin Khlebnikov <khlebnikov(a)yandex-team.ru>
net/core/neighbour: fix kmemleak minimal reference count for hash tables
Ming Lei <ming.lei(a)redhat.com>
PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity()
Miquel Raynal <miquel.raynal(a)bootlin.com>
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
Konstantin Khlebnikov <khlebnikov(a)yandex-team.ru>
net/core/neighbour: tell kmemleak about hash tables
Gustavo A. R. Silva <gustavo(a)embeddedor.com>
tipc: fix memory leak in tipc_nl_compat_publ_dump
Boris Brezillon <bbrezillon(a)kernel.org>
mtd: Check add_mtd_device() ret code
Olof Johansson <olof(a)lixom.net>
lib/genalloc.c: include vmalloc.h
Qian Cai <cai(a)gmx.us>
drivers/base/platform.c: kmemleak ignore a known leak
Yi Wang <wang.yi59(a)zte.com.cn>
fork: fix some -Wmissing-prototypes warnings
Huang Shijie <sjhuang(a)iluvatar.ai>
lib/genalloc.c: use vzalloc_node() to allocate the bitmap
Alexey Skidanov <alexey.skidanov(a)intel.com>
lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk
James Morse <james.morse(a)arm.com>
firmware: arm_sdei: Fix DT platform device creation
Nicolas Saenz Julienne <nsaenzjulienne(a)suse.de>
firmware: arm_sdei: fix wrong of_node_put() in init function
Aditya Pakki <pakki001(a)umn.edu>
infiniband/qedr: Potential null ptr dereference of qp
Aditya Pakki <pakki001(a)umn.edu>
infiniband: bnxt_re: qplib: Check the return value of send_message
Chuck Lever <chuck.lever(a)oracle.com>
xprtrdma: Prevent leak of rpcrdma_rep objects
Kangjie Lu <kjlu(a)umn.edu>
netfilter: nf_tables: fix a missing check of nla_put_failure
Anthony Yznaga <anthony.yznaga(a)oracle.com>
tools/vm/page-types.c: fix "kpagecount returned fewer pages than expected" failures
Wentao Wang <witallwang(a)gmail.com>
mm/page_alloc.c: deduplicate __memblock_free_early() and memblock_free()
Aaron Lu <aaron.lu(a)intel.com>
mm/page_alloc.c: use a single function to free page
Aaron Lu <aaron.lu(a)intel.com>
mm/page_alloc.c: free order-0 pages through PCP in page_frag_free()
Wei Yang <richard.weiyang(a)gmail.com>
vmscan: return NODE_RECLAIM_NOSCAN in node_reclaim() when CONFIG_NUMA is n
Junxiao Bi <junxiao.bi(a)oracle.com>
ocfs2: clear journal dirty flag after shutdown journal
Wen Yang <wen.yang99(a)zte.com.cn>
net/wan/fsl_ucc_hdlc: Avoid double free in ucc_hdlc_probe()
Kangjie Lu <kjlu(a)umn.edu>
net: marvell: fix a missing check of acpi_match_device
Kangjie Lu <kjlu(a)umn.edu>
tipc: fix a missing check of genlmsg_put
Kangjie Lu <kjlu(a)umn.edu>
atl1e: checking the status of atl1e_write_phy_reg
Kangjie Lu <kjlu(a)umn.edu>
net: dsa: bcm_sf2: Propagate error value from mdio_write
Kangjie Lu <kjlu(a)umn.edu>
net: stmicro: fix a missing check of clk_prepare
Kangjie Lu <kjlu(a)umn.edu>
net: (cpts) fix a missing check of clk_prepare
Richard Weinberger <richard(a)nod.at>
um: Make GCOV depend on !KCOV
Richard Weinberger <richard(a)nod.at>
um: Include sys/uio.h to have writev()
Chao Yu <yuchao0(a)huawei.com>
f2fs: fix to dirty inode synchronously
Qiuyang Sun <sunqiuyang(a)huawei.com>
f2fs: fix block address for __check_sit_bitmap
Aditya Pakki <pakki001(a)umn.edu>
net/net_namespace: Check the return value of register_pernet_subsys()
Aditya Pakki <pakki001(a)umn.edu>
net/netlink_compat: Fix a missing check of nla_parse_nested
Alexander Shiyan <shc_work(a)mail.ru>
pwm: clps711x: Fix period calculation
Fabio Estevam <festevam(a)gmail.com>
crypto: mxc-scc - fix build warnings on ARM64
Benjamin Herrenschmidt <benh(a)kernel.crashing.org>
powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
Michael Ellerman <mpe(a)ellerman.id.au>
powerpc/pseries: Fix node leak in update_lmb_associativity_index()
Christophe Leroy <christophe.leroy(a)c-s.fr>
powerpc/83xx: handle machine check caused by watchdog timer
Kangjie Lu <kjlu(a)umn.edu>
regulator: tps65910: fix a missing check of return value
Jesper Dangaard Brouer <brouer(a)redhat.com>
bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't
Parav Pandit <parav(a)mellanox.com>
IB/rxe: Make counters thread safe
Luc Van Oostenryck <luc.vanoostenryck(a)gmail.com>
drbd: fix print_st_err()'s prototype to match the definition
Lars Ellenberg <lars.ellenberg(a)linbit.com>
drbd: do not block when adjusting "disk-options" while IO is frozen
Lars Ellenberg <lars.ellenberg(a)linbit.com>
drbd: reject attach of unsuitable uuids even if connected
Lars Ellenberg <lars.ellenberg(a)linbit.com>
drbd: ignore "all zero" peer volume sizes in handshake
Alexey Kardashevskiy <aik(a)ozlabs.ru>
powerpc/powernv/eeh/npu: Fix uninitialized variables in opal_pci_eeh_freeze_status
Alexey Kardashevskiy <aik(a)ozlabs.ru>
vfio/spapr_tce: Get rid of possible infinite loop
Benjamin Herrenschmidt <benh(a)kernel.crashing.org>
powerpc/44x/bamboo: Fix PCI range
Christophe Leroy <christophe.leroy(a)c-s.fr>
powerpc/mm: Make NULL pointer deferences explicit on bad page faults.
Christophe Leroy <christophe.leroy(a)c-s.fr>
powerpc/prom: fix early DEBUG messages
Joel Stanley <joel(a)jms.id.au>
powerpc/32: Avoid unsupported flags with clang
Madhavan Srinivasan <maddy(a)linux.vnet.ibm.com>
powerpc/perf: Fix unit_sel/cache_sel checks
Kyle Roeschley <kyle.roeschley(a)ni.com>
ath6kl: Fix off by one error in scan completion
Kyle Roeschley <kyle.roeschley(a)ni.com>
ath6kl: Only use match sets when firmware supports it
Stefan Wahren <stefan.wahren(a)i2se.com>
brcmfmac: Fix access point mode
Varun Prakash <varun(a)chelsio.com>
scsi: csiostor: fix incorrect dma device in case of vport
Anatoliy Glagolev <glagolig(a)gmail.com>
scsi: qla2xxx: deadlock by configfs_depend_item
Bart Van Assche <bvanassche(a)acm.org>
RDMA/srp: Propagate ib_post_send() failures to the SCSI mid-layer
Geert Uytterhoeven <geert(a)linux-m68k.org>
openrisc: Fix broken paths to arch/or32
Alexander Shiyan <shc_work(a)mail.ru>
serial: max310x: Fix tx_empty() callback
Jonathan Bakker <xc-racer2(a)live.ca>
Bluetooth: hci_bcm: Handle specific unknown packets after firmware loading
Kangjie Lu <kjlu(a)umn.edu>
drivers/regulator: fix a missing check of return value
Christophe Leroy <christophe.leroy(a)c-s.fr>
powerpc/xmon: fix dump_segments()
Christophe Leroy <christophe.leroy(a)c-s.fr>
powerpc/book3s/32: fix number of bats in p/v_block_mapped()
Petr Machata <petrm(a)mellanox.com>
vxlan: Fix error path in __vxlan_dev_create()
Tao Ren <taoren(a)fb.com>
clocksource/drivers/fttmr010: Fix invalid interrupt register access
Dan Carpenter <dan.carpenter(a)oracle.com>
IB/qib: Fix an error code in qib_sdma_verbs_send()
Nick Bowler <nbowler(a)draconx.ca>
xfs: Fix bulkstat compat ioctls on x32 userspace.
Nick Bowler <nbowler(a)draconx.ca>
xfs: Align compat attrlist_by_handle with native implementation.
Heinz Mauelshagen <heinzm(a)redhat.com>
dm raid: fix false -EBUSY when handling check/repair message
Bob Peterson <rpeterso(a)redhat.com>
gfs2: take jdata unstuff into account in do_grow
Sweet Tea <sweettea(a)redhat.com>
dm flakey: Properly corrupt multi-page bios.
Peter Hutterer <peter.hutterer(a)who-t.net>
HID: doc: fix wrong data structure reference for UHID_OUTPUT
Geert Uytterhoeven <geert+renesas(a)glider.be>
pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10
Geert Uytterhoeven <geert+renesas(a)glider.be>
pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration
Geert Uytterhoeven <geert+renesas(a)glider.be>
pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 SEL_I2C1 field width
Michael Mueller <mimu(a)linux.ibm.com>
KVM: s390: unregister debug feature on failing arch init
Vasundhara Volam <vasundhara-v.volam(a)broadcom.com>
bnxt_en: query force speeds before disabling autoneg mode.
Michael Chan <michael.chan(a)broadcom.com>
bnxt_en: Save ring statistics before reset.
Vasundhara Volam <vasundhara-v.volam(a)broadcom.com>
bnxt_en: Return linux standard errors in bnxt_ethtool.c
Al Viro <viro(a)zeniv.linux.org.uk>
exofs_mount(): fix leaks on failure exits
Alin Nastac <alin.nastac(a)gmail.com>
netfilter: nf_nat_sip: fix RTP/RTCP source port translations
Leon Romanovsky <leon(a)kernel.org>
net/mlx5: Continue driver initialization despite debugfs failure
Martin Schiller <ms(a)dev.tdt.de>
pinctrl: xway: fix gpio-hog related boot issues
Linus Walleij <linus.walleij(a)linaro.org>
memory: omap-gpmc: Get the header of the enum
Nathan Chancellor <natechancellor(a)gmail.com>
vfio-mdev/samples: Use u8 instead of char for handle functions
Masami Hiramatsu <mhiramat(a)kernel.org>
kprobes/x86: Show x86-64 specific blacklisted symbols correctly
Masami Hiramatsu <mhiramat(a)kernel.org>
kprobes: Blacklist symbols in arch-defined prohibited area
Ross Lagerwall <ross.lagerwall(a)citrix.com>
xen/pciback: Check dev_data before using it
Andrea Righi <righi.andrea(a)gmail.com>
kprobes/x86/xen: blacklist non-attachable xen interrupt functions
Darwin Dingel <darwin.dingel(a)alliedtelesis.co.nz>
serial: 8250: Rate limit serial port rx interrupts during input overruns
Nicolas Saenz Julienne <nsaenzjulienne(a)suse.de>
gpio: raspberrypi-exp: decrease refcount on firmware dt node
Pan Bian <bianpan2016(a)163.com>
HID: intel-ish-hid: fixes incorrect error handling
Geert Uytterhoeven <geert+renesas(a)glider.be>
serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
Josef Bacik <jbacik(a)fb.com>
btrfs: only track ref_heads in delayed_ref_updates
Filipe Manana <fdmanana(a)suse.com>
Btrfs: allow clear_extent_dirty() to receive a cached extent state record
Anand Jain <anand.jain(a)oracle.com>
btrfs: dev-replace: set result code of cancel by status of scrub
Hans van Kranenburg <hans.van.kranenburg(a)mendix.com>
btrfs: fix ncopies raid_attr for RAID56
Nikolay Borisov <nborisov(a)suse.com>
btrfs: Check for missing device before bio submission in btrfs_map_bio
Roger Quadros <rogerq(a)ti.com>
usb: ehci-omap: Fix deferred probe for phy handling
Boris Brezillon <boris.brezillon(a)bootlin.com>
mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SET
Jerome Brunet <jbrunet(a)baylibre.com>
mmc: meson-gx: make sure the descriptor is stopped on errors
Lepton Wu <ytht.net(a)gmail.com>
VSOCK: bind to random port for VMADDR_PORT_ANY
Atul Gupta <atul.gupta(a)chelsio.com>
crypto/chelsio/chtls: listen fails with multiadapt
Jim Mattson <jmattson(a)google.com>
kvm: vmx: Set IA32_TSC_AUX for legacy mode guests
Krzysztof Kozlowski <krzk(a)kernel.org>
gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB
Marek Vasut <marek.vasut(a)gmail.com>
gpio: pca953x: Fix AI overflow on PCAL6524
Sara Sharon <sara.sharon(a)intel.com>
iwlwifi: pcie: set cmd_len in the correct place
Sara Sharon <sara.sharon(a)intel.com>
iwlwifi: pcie: fix erroneous print
Avraham Stern <avraham.stern(a)intel.com>
iwlwifi: mvm: force TCM re-evaluation on TCM resume
Luca Coelho <luciano.coelho(a)intel.com>
iwlwifi: move iwl_nvm_check_version() into dvm
Masahiro Yamada <yamada.masahiro(a)socionext.com>
microblaze: fix multiple bugs in arch/microblaze/boot/Makefile
Masahiro Yamada <yamada.masahiro(a)socionext.com>
microblaze: move "... is ready" messages to arch/microblaze/Makefile
Masahiro Yamada <yamada.masahiro(a)socionext.com>
microblaze: adjust the help to the real behavior
Pan Bian <bianpan2016(a)163.com>
ubi: Do not drop UBI device reference before using
Pan Bian <bianpan2016(a)163.com>
ubi: Put MTD device after it is not used
Gabor Juhos <juhosg(a)openwrt.org>
ubifs: Fix default compression selection in ubifs
Sagi Grimberg <sagi(a)grimberg.me>
nvme: fix kernel paging oops
Darrick J. Wong <darrick.wong(a)oracle.com>
xfs: require both realtime inodes to mount
Shenghui Wang <shhuiw(a)foxmail.com>
bcache: do not mark writeback_running too early
Shenghui Wang <shhuiw(a)foxmail.com>
bcache: do not check if debug dentry is ERR or NULL explicitly on remove
Pan Bian <bianpan2016(a)163.com>
rtl818x: fix potential use after free
Madhan Mohan R <MadhanMohan.R(a)cypress.com>
brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373
Wright Feng <wright.feng(a)cypress.com>
brcmfmac: set F2 watermark to 256 for 4373
Brian Norris <briannorris(a)chromium.org>
mwifiex: debugfs: correct histogram spacing, formatting
Pan Bian <bianpan2016(a)163.com>
mwifiex: fix potential NULL dereference and use after free
Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com>
arm64: dts: renesas: draak: Fix CVBS input
Eric Biggers <ebiggers(a)google.com>
crypto: user - support incremental algorithm dumps
Harald Freudenberger <freude(a)linux.ibm.com>
s390/zcrypt: make sysfs reset attribute trigger queue reset
Jens Axboe <axboe(a)kernel.dk>
nvme: provide fallback for discard alloc failure
Giridhar Malavali <gmalavali(a)marvell.com>
scsi: qla2xxx: Fix for FC-NVMe discovery for NPIV port
Himanshu Madhani <hmadhani(a)marvell.com>
scsi: qla2xxx: Fix NPIV handling for FC-NVMe
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Enable Management features for IF_TYPE=6
Hans de Goede <hdegoede(a)redhat.com>
ACPI / LPSS: Ignore acpi_device_fix_up_power() return value
Arnd Bergmann <arnd(a)arndb.de>
ARM: ks8695: fix section mismatch warning
Dave Chinner <dchinner(a)redhat.com>
xfs: zero length symlinks are not valid
Thomas Meyer <thomas(a)m3y3r.de>
PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
Gal Pressman <galpress(a)amazon.com>
RDMA/vmw_pvrdma: Use atomic memory allocation in create AH
Will Deacon <will.deacon(a)arm.com>
arm64: preempt: Fix big-endian when checking preempt count in assembly
Lijun Ou <oulijun(a)huawei.com>
RDMA/hns: Fix the bug while use multi-hop of pbl
Aaro Koskinen <aaro.koskinen(a)iki.fi>
ARM: OMAP1: fix USB configuration for device-only setups
Vadim Pasternak <vadimp(a)mellanox.com>
platform/x86: mlx-platform: Fix LED configuration
Tony Lindgren <tony(a)atomide.com>
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
Suzuki K Poulose <Suzuki.Poulose(a)arm.com>
arm64: smp: Handle errors reported by the firmware
Steve Capper <steve.capper(a)arm.com>
arm64: mm: Prevent mismatched 52-bit VA support
Tony Lindgren <tony(a)atomide.com>
ARM: dts: Fix hsi gdd range for omap4
Helge Deller <deller(a)gmx.de>
parisc: Fix HP SDC hpa address output
Helge Deller <deller(a)gmx.de>
parisc: Fix serio address output
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx25: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx27: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx1: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx23: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx50: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx6sl: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx6sx: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx6ul: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx7: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx35: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx31: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx53: Fix memory node duplication
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx51: Fix memory node duplication
Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
Masami Hiramatsu <mhiramat(a)kernel.org>
tracing: Lock event_mutex before synth_event_mutex
Linus Walleij <linus.walleij(a)linaro.org>
ARM: dts: Fix up SQ201 flash access
Ding Tao <miyatsu(a)qq.com>
arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Fix dif and first burst use in write commands
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Fix kernel Oops due to null pring pointers
Bart Van Assche <bvanassche(a)acm.org>
scsi: target/tcmu: Fix queue_cmd_ring() declaration
Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de>
pwm: bcm-iproc: Prevent unloading the driver module while in use
Dan Carpenter <dan.carpenter(a)oracle.com>
block: drbd: remove a stray unlock in __drbd_send_protocol()
Ahmed Zaki <anzaki(a)gmail.com>
mac80211: fix station inactive_time shortly after boot
Toke Høiland-Jørgensen <toke(a)redhat.com>
net/fq_impl: Switch to kvmalloc() for memory allocation
Jeff Layton <jlayton(a)kernel.org>
ceph: return -EINVAL if given fsc mount option on kernel w/o support
Vladimir Oltean <olteanv(a)gmail.com>
net: mscc: ocelot: fix __ocelot_rmw_ix prototype
Doug Berger <opendmb(a)gmail.com>
net: bcmgenet: reapply manual settings to the PHY
Doug Berger <opendmb(a)gmail.com>
net: bcmgenet: use RGMII loopback for MAC reset
Ilya Leoshkevich <iii(a)linux.ibm.com>
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
Olivier Moysan <olivier.moysan(a)st.com>
ASoC: stm32: sai: add restriction on mmap support
Xingyu Chen <xingyu.chen(a)amlogic.com>
watchdog: meson: Fix the wrong value of left time
Timo Schlüßler <schluessler(a)krause.de>
can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race condition
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: flexcan: increase error counters if skb enqueueing via can_rx_offload_queue_sorted() fails
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: rx-offload: can_rx_offload_irq_offload_fifo(): continue on error
Jeroen Hofstee <jhofstee(a)victronenergy.com>
can: rx-offload: can_rx_offload_irq_offload_timestamp(): continue on error
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: rx-offload: can_rx_offload_offload_one(): use ERR_PTR() to propagate error value in case of errors
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: rx-offload: can_rx_offload_offload_one(): increment rx_fifo_errors on queue overflow or OOM
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: rx-offload: can_rx_offload_offload_one(): do not increase the skb_queue beyond skb_queue_len_max
Marc Kleine-Budde <mkl(a)pengutronix.de>
can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb mem leak
Jeroen Hofstee <jhofstee(a)victronenergy.com>
can: c_can: D_CAN: c_can_chip_config(): perform a sofware reset on open
Jeroen Hofstee <jhofstee(a)victronenergy.com>
can: peak_usb: report bus recovery as well
Florian Westphal <fw(a)strlen.de>
bridge: ebtables: don't crash when using dnat target in output chains
Chuhong Yuan <hslester96(a)gmail.com>
net: fec: add missed clk_disable_unprepare in remove
Tony Lindgren <tony(a)atomide.com>
clk: ti: clkctrl: Fix failed to enable error with double udelay timeout
Peter Ujfalusi <peter.ujfalusi(a)ti.com>
clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call
Xiaochen Shen <xiaochen.shen(a)intel.com>
x86/resctrl: Prevent NULL pointer dereference when reading mondata
Matthew Wilcox (Oracle) <willy(a)infradead.org>
idr: Fix idr_alloc_u32 on 32-bit systems
Matthew Wilcox (Oracle) <willy(a)infradead.org>
idr: Fix integer overflow in idr_for_each_entry
Eric Dumazet <edumazet(a)google.com>
powerpc/bpf: Fix tail call implementation
Björn Töpel <bjorn.topel(a)intel.com>
samples/bpf: fix build by setting HAVE_ATTR_TEST to zero
Ondrej Jirman <megous(a)megous.com>
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
Colin Ian King <colin.king(a)canonical.com>
clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18
Nathan Chancellor <natechancellor(a)gmail.com>
clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup
Alexandre Belloni <alexandre.belloni(a)bootlin.com>
clk: at91: avoid sleeping early
Randy Dunlap <rdunlap(a)infradead.org>
reset: fix reset_control_ops kerneldoc comment
Fabio Estevam <festevam(a)gmail.com>
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
Andy Shevchenko <andriy.shevchenko(a)linux.intel.com>
pinctrl: cherryview: Allocate IRQ chip dynamic
Marek Szyprowski <m.szyprowski(a)samsung.com>
clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume
Russell King <rmk+kernel(a)armlinux.org.uk>
ASoC: kirkwood: fix device remove ordering
Russell King <rmk+kernel(a)armlinux.org.uk>
ASoC: kirkwood: fix external clock probe defer
Marek Szyprowski <m.szyprowski(a)samsung.com>
clk: samsung: exynos5433: Fix error paths
Kishon Vijay Abraham I <kishon(a)ti.com>
reset: Fix memory leak in reset_control_array_put()
Xiaojun Sang <xsang(a)codeaurora.org>
ASoC: compress: fix unsigned integer overflow check
Stephan Gerhold <stephan(a)gerhold.net>
ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX
Fabien Parent <fparent(a)baylibre.com>
clocksource/drivers/mediatek: Fix error handling
Martin Blumenstingl <martin.blumenstingl(a)googlemail.com>
clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
-------------
Diffstat:
Documentation/hid/uhid.txt | 2 +-
Makefile | 4 +-
arch/arm/Kconfig.debug | 28 +++----
arch/arm/boot/dts/gemini-sq201.dts | 37 ++-------
arch/arm/boot/dts/imx1-ads.dts | 1 +
arch/arm/boot/dts/imx1-apf9328.dts | 1 +
arch/arm/boot/dts/imx1.dtsi | 2 -
arch/arm/boot/dts/imx23-evk.dts | 1 +
arch/arm/boot/dts/imx23-olinuxino.dts | 1 +
arch/arm/boot/dts/imx23-sansa.dts | 1 +
arch/arm/boot/dts/imx23-stmp378x_devb.dts | 1 +
arch/arm/boot/dts/imx23-xfi3.dts | 1 +
arch/arm/boot/dts/imx23.dtsi | 2 -
arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 1 +
arch/arm/boot/dts/imx25-karo-tx25.dts | 1 +
arch/arm/boot/dts/imx25-pdk.dts | 1 +
arch/arm/boot/dts/imx25.dtsi | 2 -
arch/arm/boot/dts/imx27-apf27.dts | 1 +
arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi | 1 +
arch/arm/boot/dts/imx27-pdk.dts | 1 +
arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi | 1 +
arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi | 1 +
arch/arm/boot/dts/imx27.dtsi | 2 -
arch/arm/boot/dts/imx31-bug.dts | 1 +
arch/arm/boot/dts/imx31-lite.dts | 1 +
arch/arm/boot/dts/imx31.dtsi | 2 -
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi | 1 +
arch/arm/boot/dts/imx35-pdk.dts | 1 +
arch/arm/boot/dts/imx35.dtsi | 2 -
arch/arm/boot/dts/imx50-evk.dts | 1 +
arch/arm/boot/dts/imx50.dtsi | 2 -
arch/arm/boot/dts/imx51-apf51.dts | 1 +
arch/arm/boot/dts/imx51-babbage.dts | 1 +
arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi | 1 +
arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi | 1 +
arch/arm/boot/dts/imx51-ts4800.dts | 1 +
arch/arm/boot/dts/imx51-zii-rdu1.dts | 1 +
arch/arm/boot/dts/imx51-zii-scu2-mezz.dts | 1 +
arch/arm/boot/dts/imx51-zii-scu3-esb.dts | 1 +
arch/arm/boot/dts/imx51.dtsi | 2 -
arch/arm/boot/dts/imx53-ard.dts | 1 +
arch/arm/boot/dts/imx53-cx9020.dts | 1 +
arch/arm/boot/dts/imx53-m53.dtsi | 1 +
arch/arm/boot/dts/imx53-qsb-common.dtsi | 1 +
arch/arm/boot/dts/imx53-smd.dts | 1 +
arch/arm/boot/dts/imx53-tqma53.dtsi | 1 +
arch/arm/boot/dts/imx53-tx53.dtsi | 1 +
arch/arm/boot/dts/imx53-usbarmory.dts | 1 +
arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi | 8 +-
arch/arm/boot/dts/imx53.dtsi | 2 -
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 8 ++
arch/arm/boot/dts/imx6sl-evk.dts | 1 +
arch/arm/boot/dts/imx6sl-warp.dts | 1 +
arch/arm/boot/dts/imx6sl.dtsi | 2 -
arch/arm/boot/dts/imx6sll-evk.dts | 1 +
arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 1 +
arch/arm/boot/dts/imx6sx-sabreauto.dts | 1 +
arch/arm/boot/dts/imx6sx-sdb.dtsi | 1 +
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 1 +
arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 1 +
arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 1 +
arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 1 +
arch/arm/boot/dts/imx6sx.dtsi | 2 -
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 1 +
arch/arm/boot/dts/imx6ul-geam.dts | 1 +
arch/arm/boot/dts/imx6ul-isiot.dtsi | 1 +
arch/arm/boot/dts/imx6ul-litesom.dtsi | 1 +
arch/arm/boot/dts/imx6ul-opos6ul.dtsi | 1 +
arch/arm/boot/dts/imx6ul-pico-hobbit.dts | 1 +
arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 1 +
arch/arm/boot/dts/imx6ul.dtsi | 2 -
arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi | 1 +
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 1 +
arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 3 +-
arch/arm/boot/dts/imx7d-colibri-emmc.dtsi | 1 +
arch/arm/boot/dts/imx7d-colibri.dtsi | 1 +
arch/arm/boot/dts/imx7d-nitrogen7.dts | 1 +
arch/arm/boot/dts/imx7d-pico.dtsi | 1 +
arch/arm/boot/dts/imx7d-sdb.dts | 1 +
arch/arm/boot/dts/imx7s-colibri.dtsi | 1 +
arch/arm/boot/dts/imx7s-warp.dts | 1 +
arch/arm/boot/dts/imx7s.dtsi | 2 -
arch/arm/boot/dts/omap4-l4.dtsi | 4 +-
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 1 +
arch/arm/mach-ks8695/board-acs5k.c | 2 +-
arch/arm/mach-omap1/Makefile | 2 +-
arch/arm/mach-omap1/include/mach/usb.h | 2 +-
.../boot/dts/marvell/armada-3720-espressobin.dts | 22 +++++
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 2 +-
arch/arm64/include/asm/assembler.h | 8 +-
arch/arm64/kernel/entry.S | 6 +-
arch/arm64/kernel/head.S | 26 ++++++
arch/arm64/kernel/smp.c | 6 ++
arch/microblaze/Makefile | 14 ++--
arch/microblaze/boot/Makefile | 23 ++----
arch/openrisc/kernel/entry.S | 2 +-
arch/openrisc/kernel/head.S | 2 +-
arch/powerpc/Makefile | 9 +-
arch/powerpc/boot/dts/bamboo.dts | 4 +-
arch/powerpc/include/asm/cputable.h | 1 +
arch/powerpc/include/asm/reg.h | 2 +
arch/powerpc/kernel/cputable.c | 10 ++-
arch/powerpc/kernel/exceptions-64s.S | 2 +-
arch/powerpc/kernel/prom.c | 6 +-
arch/powerpc/mm/fault.c | 17 ++--
arch/powerpc/mm/ppc_mmu_32.c | 4 +-
arch/powerpc/net/bpf_jit_comp64.c | 13 +++
arch/powerpc/perf/isa207-common.c | 25 ++++--
arch/powerpc/perf/isa207-common.h | 4 +-
arch/powerpc/platforms/83xx/misc.c | 17 ++++
arch/powerpc/platforms/powernv/eeh-powernv.c | 8 +-
arch/powerpc/platforms/powernv/pci-ioda.c | 4 +-
arch/powerpc/platforms/powernv/pci.c | 4 +-
arch/powerpc/platforms/pseries/dlpar.c | 4 +
arch/powerpc/platforms/pseries/hotplug-memory.c | 1 +
arch/powerpc/xmon/xmon.c | 2 +-
arch/s390/kvm/kvm-s390.c | 17 +++-
arch/s390/mm/gup.c | 9 +-
arch/um/Kconfig.debug | 1 +
arch/um/drivers/vector_user.c | 1 +
arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c | 4 +
arch/x86/kernel/kprobes/core.c | 6 ++
arch/x86/kvm/vmx.c | 86 +++++++++----------
arch/x86/xen/xen-asm_64.S | 2 +
crypto/crypto_user.c | 37 +++++----
drivers/acpi/acpi_lpss.c | 7 +-
drivers/acpi/apei/ghes.c | 32 ++++----
drivers/ata/ahci_mvebu.c | 68 +++++++++++----
drivers/base/platform.c | 3 +
drivers/block/drbd/drbd_main.c | 1 -
drivers/block/drbd/drbd_nl.c | 43 +++++++---
drivers/block/drbd/drbd_receiver.c | 52 +++++++++++-
drivers/block/drbd/drbd_state.h | 2 +-
drivers/bluetooth/hci_bcm.c | 22 +++++
drivers/bus/ti-sysc.c | 32 ++++++--
drivers/char/hw_random/stm32-rng.c | 8 ++
drivers/clk/at91/clk-generated.c | 28 +++----
drivers/clk/at91/clk-main.c | 7 +-
drivers/clk/at91/sckc.c | 20 ++++-
drivers/clk/clk-stm32mp1.c | 28 ++++---
drivers/clk/meson/gxbb.c | 1 +
drivers/clk/samsung/clk-exynos5420.c | 6 ++
drivers/clk/samsung/clk-exynos5433.c | 14 +++-
drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 2 +-
drivers/clk/sunxi/clk-sunxi.c | 4 +-
drivers/clk/ti/clk-dra7-atl.c | 6 --
drivers/clk/ti/clkctrl.c | 5 +-
drivers/clocksource/timer-fttmr010.c | 73 +++++++++-------
drivers/clocksource/timer-mediatek.c | 10 +--
drivers/crypto/chelsio/chtls/chtls.h | 5 ++
drivers/crypto/chelsio/chtls/chtls_main.c | 50 ++++++-----
drivers/crypto/mxc-scc.c | 12 +--
drivers/crypto/stm32/stm32-hash.c | 2 +-
drivers/dma/stm32-dma.c | 20 ++---
drivers/firmware/arm_sdei.c | 6 --
drivers/gpio/gpio-pca953x.c | 2 +-
drivers/gpio/gpio-raspberrypi-exp.c | 1 +
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
drivers/gpu/ipu-v3/ipu-pre.c | 6 ++
drivers/hid/hid-core.c | 51 ++++++++++--
drivers/hid/intel-ish-hid/ishtp-hid.c | 2 +-
drivers/infiniband/hw/bnxt_re/qplib_sp.c | 5 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 15 +++-
drivers/infiniband/hw/hns/hns_roce_mr.c | 4 +-
drivers/infiniband/hw/hns/hns_roce_qp.c | 3 +-
drivers/infiniband/hw/qedr/qedr_iw_cm.c | 2 +
drivers/infiniband/hw/qib/qib_sdma.c | 4 +-
drivers/infiniband/hw/vmw_pvrdma/pvrdma_verbs.c | 2 +-
drivers/infiniband/sw/rxe/rxe_hw_counters.c | 2 +-
drivers/infiniband/sw/rxe/rxe_verbs.h | 6 +-
drivers/infiniband/ulp/srp/ib_srp.c | 1 +
drivers/input/serio/gscps2.c | 4 +-
drivers/input/serio/hp_sdc.c | 4 +-
drivers/iommu/amd_iommu.c | 8 +-
drivers/mailbox/mailbox-test.c | 14 ++--
drivers/mailbox/stm32-ipcc.c | 37 ++++++---
drivers/md/bcache/debug.c | 3 +-
drivers/md/bcache/super.c | 3 +-
drivers/md/bcache/writeback.c | 3 +-
drivers/md/dm-flakey.c | 33 +++++---
drivers/md/dm-raid.c | 3 +-
drivers/media/platform/atmel/atmel-isc.c | 12 ++-
drivers/media/platform/stm32/stm32-dcmi.c | 23 +++++-
drivers/media/v4l2-core/v4l2-ctrls.c | 1 +
drivers/memory/omap-gpmc.c | 1 +
drivers/misc/mei/bus.c | 9 +-
drivers/misc/mei/hw-me-regs.h | 1 +
drivers/misc/mei/pci-me.c | 1 +
drivers/mmc/core/block.c | 6 --
drivers/mmc/core/queue.c | 9 +-
drivers/mmc/host/meson-gx-mmc.c | 73 +++++++++++++---
drivers/mtd/mtdcore.h | 2 +-
drivers/mtd/mtdpart.c | 35 ++++++--
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/pmecc.c | 21 +++--
drivers/mtd/nand/raw/sunxi_nand.c | 2 +-
drivers/mtd/spi-nor/spi-nor.c | 2 +-
drivers/mtd/ubi/build.c | 2 +-
drivers/mtd/ubi/kapi.c | 2 +-
drivers/net/Kconfig | 4 +-
drivers/net/can/c_can/c_can.c | 26 ++++++
drivers/net/can/flexcan.c | 10 ++-
drivers/net/can/rx-offload.c | 96 ++++++++++++++++++----
drivers/net/can/spi/mcp251x.c | 2 +-
drivers/net/can/usb/peak_usb/pcan_usb.c | 15 ++--
drivers/net/dsa/bcm_sf2.c | 7 +-
drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 57 +++++++++----
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 78 ++++++++++++++----
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +-
drivers/net/ethernet/broadcom/genet/bcmmii.c | 33 ++++++++
drivers/net/ethernet/cadence/macb.h | 6 +-
drivers/net/ethernet/cadence/macb_main.c | 19 +++--
drivers/net/ethernet/cadence/macb_ptp.c | 5 +-
drivers/net/ethernet/freescale/fec_main.c | 2 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c | 2 +
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 7 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 +
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +-
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 7 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +
drivers/net/ethernet/mellanox/mlx5/core/main.c | 8 +-
drivers/net/ethernet/mscc/ocelot.h | 2 +-
drivers/net/ethernet/sfc/ef10.c | 29 +++++--
drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 4 +-
drivers/net/ethernet/ti/cpts.c | 4 +-
drivers/net/macvlan.c | 3 +-
drivers/net/slip/slip.c | 1 +
drivers/net/vxlan.c | 13 ++-
drivers/net/wan/fsl_ucc_hdlc.c | 1 -
drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 10 +++
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 29 ++++++-
.../wireless/broadcom/brcm80211/brcmfmac/sdio.h | 9 +-
drivers/net/wireless/intel/iwlwifi/dvm/main.c | 17 ++++
.../net/wireless/intel/iwlwifi/iwl-eeprom-parse.c | 19 -----
.../net/wireless/intel/iwlwifi/iwl-eeprom-parse.h | 5 +-
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 14 ++++
drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 24 +++---
drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 10 +--
drivers/net/wireless/marvell/mwifiex/debugfs.c | 14 ++--
drivers/net/wireless/marvell/mwifiex/scan.c | 18 ++--
drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 3 +-
drivers/nvme/host/core.c | 41 +++++++--
drivers/nvme/host/nvme.h | 3 +
drivers/pci/msi.c | 22 +++--
drivers/pinctrl/intel/pinctrl-cherryview.c | 24 +++---
drivers/pinctrl/pinctrl-xway.c | 39 ++++++---
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 +-
drivers/pinctrl/sh-pfc/pfc-sh7734.c | 16 ++--
drivers/pinctrl/stm32/pinctrl-stm32.c | 26 +++---
drivers/platform/x86/hp-wmi.c | 10 +--
drivers/platform/x86/mlx-platform.c | 4 +-
drivers/power/avs/smartreflex.c | 3 +-
drivers/pwm/core.c | 1 +
drivers/pwm/pwm-bcm-iproc.c | 1 +
drivers/pwm/pwm-berlin.c | 1 -
drivers/pwm/pwm-clps711x.c | 4 +-
drivers/pwm/pwm-pca9685.c | 1 -
drivers/pwm/pwm-samsung.c | 1 -
drivers/regulator/palmas-regulator.c | 5 +-
drivers/regulator/tps65910-regulator.c | 4 +-
drivers/reset/core.c | 1 +
drivers/s390/crypto/ap_queue.c | 23 +++++-
drivers/scsi/csiostor/csio_init.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 12 +++
drivers/scsi/libsas/sas_expander.c | 29 ++++++-
drivers/scsi/lpfc/lpfc.h | 6 ++
drivers/scsi/lpfc/lpfc_attr.c | 4 +-
drivers/scsi/lpfc/lpfc_bsg.c | 6 +-
drivers/scsi/lpfc/lpfc_els.c | 4 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 7 +-
drivers/scsi/lpfc/lpfc_scsi.c | 18 ++++
drivers/scsi/lpfc/lpfc_sli.c | 2 +
drivers/scsi/qla2xxx/qla_attr.c | 2 +
drivers/scsi/qla2xxx/qla_init.c | 10 +--
drivers/scsi/qla2xxx/qla_nvme.c | 16 +---
drivers/scsi/qla2xxx/qla_os.c | 2 +
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 48 ++---------
drivers/scsi/qla2xxx/tcm_qla2xxx.h | 3 -
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 5 +-
drivers/staging/rtl8723bs/os_dep/sdio_intf.c | 7 +-
drivers/target/target_core_user.c | 2 +-
drivers/thunderbolt/switch.c | 54 +++++++++---
drivers/tty/serial/8250/8250_core.c | 26 ++++++
drivers/tty/serial/8250/8250_fsl.c | 23 +++++-
drivers/tty/serial/8250/8250_of.c | 5 ++
drivers/tty/serial/max310x.c | 7 +-
drivers/tty/serial/sh-sci.c | 2 +-
drivers/usb/dwc2/core.c | 2 +-
drivers/usb/host/ehci-omap.c | 7 +-
drivers/usb/serial/ftdi_sio.c | 3 +
drivers/usb/serial/ftdi_sio_ids.h | 7 ++
drivers/vfio/vfio_iommu_spapr_tce.c | 10 +--
drivers/watchdog/meson_gxbb_wdt.c | 4 +-
drivers/watchdog/sama5d4_wdt.c | 4 +-
drivers/xen/xen-pciback/pci_stub.c | 3 +-
fs/btrfs/delayed-ref.c | 3 -
fs/btrfs/dev-replace.c | 21 +++--
fs/btrfs/disk-io.c | 7 +-
fs/btrfs/extent-tree.c | 7 +-
fs/btrfs/extent_io.h | 4 +-
fs/btrfs/volumes.c | 13 +--
fs/ceph/super.c | 11 ++-
fs/exofs/super.c | 37 +++++++--
fs/ext4/inode.c | 15 ++++
fs/ext4/super.c | 21 +++--
fs/f2fs/file.c | 2 +-
fs/f2fs/segment.c | 2 +-
fs/gfs2/bmap.c | 2 +
fs/ocfs2/journal.c | 6 +-
fs/ubifs/sb.c | 13 ++-
fs/xfs/libxfs/xfs_symlink_remote.c | 14 +++-
fs/xfs/xfs_buf.c | 3 +-
fs/xfs/xfs_ioctl32.c | 40 ++++++++-
fs/xfs/xfs_rtalloc.c | 4 +-
fs/xfs/xfs_symlink.c | 33 ++++----
include/linux/blktrace_api.h | 8 +-
include/linux/genalloc.h | 13 +--
include/linux/gpio/consumer.h | 2 +-
include/linux/idr.h | 2 +-
include/linux/kprobes.h | 3 +
include/linux/memory_hotplug.h | 18 ++--
include/linux/netdevice.h | 2 +-
include/linux/reset-controller.h | 2 +-
include/linux/sched/task.h | 2 +
include/linux/serial_8250.h | 4 +
include/linux/swap.h | 6 --
include/linux/trace_events.h | 2 +
include/net/fq_impl.h | 4 +-
include/net/sctp/structs.h | 3 +
include/net/sock.h | 2 +-
include/trace/events/rpcrdma.h | 28 +++++++
init/main.c | 1 -
kernel/bpf/cpumap.c | 13 ++-
kernel/bpf/syscall.c | 6 +-
kernel/fork.c | 5 --
kernel/kprobes.c | 67 +++++++++++----
kernel/trace/trace_events.c | 34 ++++++--
kernel/trace/trace_events_hist.c | 24 +++---
lib/genalloc.c | 25 +++---
lib/radix-tree.c | 2 +-
mm/internal.h | 10 +++
mm/memblock.c | 7 +-
mm/page_alloc.c | 29 +++----
net/bridge/netfilter/ebt_dnat.c | 19 ++++-
net/core/neighbour.c | 13 ++-
net/core/net_namespace.c | 3 +-
net/core/sock.c | 2 +-
net/decnet/dn_dev.c | 2 +-
net/ipv4/ip_gre.c | 33 ++++----
net/ipv4/ip_tunnel.c | 8 +-
net/ipv4/tcp_timer.c | 6 +-
net/ipv6/ip6_gre.c | 36 ++++----
net/mac80211/sta_info.c | 3 +-
net/netfilter/nf_nat_sip.c | 39 ++++++++-
net/netfilter/nf_tables_api.c | 2 +
net/openvswitch/datapath.c | 17 +++-
net/psample/psample.c | 2 +-
net/sched/sch_mq.c | 3 +-
net/sched/sch_mqprio.c | 4 +-
net/sched/sch_multiq.c | 2 +-
net/sched/sch_prio.c | 2 +-
net/sctp/associola.c | 1 +
net/sctp/endpointola.c | 1 +
net/sctp/input.c | 4 +-
net/sctp/sm_statefuns.c | 4 +-
net/sctp/transport.c | 3 +-
net/smc/smc_cdc.c | 7 +-
net/smc/smc_cdc.h | 45 +++++++---
net/smc/smc_core.c | 4 +
net/smc/smc_tx.c | 10 +--
net/sunrpc/xprtrdma/rpc_rdma.c | 4 +
net/tipc/link.c | 2 +-
net/tipc/netlink_compat.c | 15 +++-
net/vmw_vsock/af_vsock.c | 7 +-
net/xfrm/xfrm_state.c | 2 +
samples/bpf/Makefile | 1 +
samples/vfio-mdev/mtty.c | 26 +++---
scripts/gdb/linux/symbols.py | 3 +-
security/apparmor/apparmorfs.c | 1 +
sound/core/compress_offload.c | 2 +-
sound/soc/codecs/msm8916-wcd-analog.c | 4 +-
sound/soc/codecs/rt5645.c | 14 ++++
sound/soc/kirkwood/kirkwood-i2s.c | 11 +--
sound/soc/samsung/i2s.c | 8 +-
sound/soc/stm/stm32_i2s.c | 29 ++++---
sound/soc/stm/stm32_sai.c | 11 ++-
sound/soc/stm/stm32_sai_sub.c | 12 ++-
tools/testing/selftests/bpf/test_sockmap.c | 9 ++
tools/vm/page-types.c | 2 +-
virt/kvm/kvm_main.c | 2 +-
398 files changed, 2626 insertions(+), 1216 deletions(-)
4 years, 9 months
- 15
- 351
[PATCH 4.19 000/114] 4.19.93-stable review
by Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.19.93 release.
There are 114 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 04 Jan 2020 21:58:48 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.93-rc…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Linux 4.19.93-rc1
Hans de Goede <hdegoede(a)redhat.com>
pinctrl: baytrail: Really serialize all register accesses
David Engraf <david.engraf(a)sysgo.com>
tty/serial: atmel: fix out of range clock divider handling
Christophe Leroy <christophe.leroy(a)c-s.fr>
spi: fsl: don't map irq during probe
Taehee Yoo <ap420073(a)gmail.com>
gtp: avoid zero size hashtable
Taehee Yoo <ap420073(a)gmail.com>
gtp: fix an use-after-free in ipv4_pdp_find()
Taehee Yoo <ap420073(a)gmail.com>
gtp: fix wrong condition in gtp_genl_dump_pdp()
Eric Dumazet <edumazet(a)google.com>
tcp: do not send empty skb from tcp_write_xmit()
Eric Dumazet <edumazet(a)google.com>
tcp/dccp: fix possible race __inet_lookup_established()
Russell King <rmk+kernel(a)armlinux.org.uk>
net: marvell: mvpp2: phylink requires the link interrupt
Taehee Yoo <ap420073(a)gmail.com>
gtp: do not allow adding duplicate tid and ms_addr pdp context
Hangbin Liu <liuhangbin(a)gmail.com>
net/dst: do not confirm neighbor for vxlan and geneve pmtu update
Hangbin Liu <liuhangbin(a)gmail.com>
sit: do not confirm neighbor when do pmtu update
Hangbin Liu <liuhangbin(a)gmail.com>
vti: do not confirm neighbor when do pmtu update
Hangbin Liu <liuhangbin(a)gmail.com>
tunnel: do not confirm neighbor when do pmtu update
Hangbin Liu <liuhangbin(a)gmail.com>
net/dst: add new function skb_dst_update_pmtu_no_confirm
Hangbin Liu <liuhangbin(a)gmail.com>
gtp: do not confirm neighbor when do pmtu update
Hangbin Liu <liuhangbin(a)gmail.com>
ip6_gre: do not confirm neighbor when do pmtu update
Hangbin Liu <liuhangbin(a)gmail.com>
net: add bool confirm_neigh parameter for dst_ops.update_pmtu
Stefano Garzarella <sgarzare(a)redhat.com>
vhost/vsock: accept only packets with the right dst_cid
Antonio Messina <amessina(a)google.com>
udp: fix integer overflow while computing available space in sk_rcvbuf
Cambda Zhu <cambda(a)linux.alibaba.com>
tcp: Fix highest_sack and highest_sack_seq
Vladis Dronov <vdronov(a)redhat.com>
ptp: fix the race between the release of ptp_clock and cdev
Martin Blumenstingl <martin.blumenstingl(a)googlemail.com>
net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
Vladyslav Tarasiuk <vladyslavt(a)mellanox.com>
net/mlxfw: Fix out-of-memory error in mfa2 flash burning
Netanel Belgazal <netanel(a)amazon.com>
net: ena: fix napi handler misbehavior when the napi budget is zero
Eric Dumazet <edumazet(a)google.com>
hrtimer: Annotate lockless access to timer->state
Eric Dumazet <edumazet(a)google.com>
net: icmp: fix data-race in cmp_global_allow()
Eric Dumazet <edumazet(a)google.com>
net: add a READ_ONCE() in skb_peek_tail()
Eric Dumazet <edumazet(a)google.com>
inetpeer: fix data-race in inet_putpeer / inet_putpeer
Eric Dumazet <edumazet(a)google.com>
netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()
Eric Dumazet <edumazet(a)google.com>
6pack,mkiss: fix possible deadlock
Florian Westphal <fw(a)strlen.de>
netfilter: ebtables: compat: reject all padding in matches/watchers
Logan Gunthorpe <logang(a)deltatee.com>
PCI/switchtec: Read all 64 bits of part_event_bitmap
Linus Torvalds <torvalds(a)linux-foundation.org>
filldir[64]: remove WARN_ON_ONCE() for bad directory entries
Linus Torvalds <torvalds(a)linux-foundation.org>
Make filldir[64]() verify the directory entry filename is valid
Mattias Jacobsson <2pi(a)mok.nu>
perf strbuf: Remove redundant va_end() in strbuf_addv()
Mahesh Bandewar <maheshb(a)google.com>
bonding: fix active-backup transition after link failure
Takashi Iwai <tiwai(a)suse.de>
ALSA: hda - Downgrade error message for single-cmd fallback
Marco Oliverio <marco.oliverio(a)tanaza.com>
netfilter: nf_queue: enqueue skbs with NULL dst
Alexander Lobakin <alobakin(a)dlink.ru>
net, sysctl: Fix compiler warning when only cBPF is present
Jan H. Schönherr <jschoenh(a)amazon.de>
x86/mce: Fix possibly incorrect severity calculation on AMD
Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Revert "powerpc/vcpu: Assume dedicated processors as non-preempt"
Mike Rapoport <rppt(a)linux.ibm.com>
userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
Johannes Weiner <hannes(a)cmpxchg.org>
kernel: sysctl: make drop_caches write-only
Daniel Baluta <daniel.baluta(a)nxp.com>
mailbox: imx: Fix Tx doorbell shutdown path
Ding Xiang <dingxiang(a)cmss.chinamobile.com>
ocfs2: fix passing zero to 'PTR_ERR' warning
Thomas Richter <tmricht(a)linux.ibm.com>
s390/cpum_sf: Check for SDBT and SDB consistency
Masahiro Yamada <yamada.masahiro(a)socionext.com>
libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
Harald Freudenberger <freude(a)linux.ibm.com>
s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR
Arnaldo Carvalho de Melo <acme(a)redhat.com>
perf regs: Make perf_reg_name() return "unknown" instead of NULL
Adrian Hunter <adrian.hunter(a)intel.com>
perf script: Fix brstackinsn for AUXTRACE
Diego Elio Pettenò <flameeyes(a)flameeyes.com>
cdrom: respect device capabilities during opening action
Chengguang Xu <cgxu519(a)mykernel.net>
f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()
Nathan Chancellor <natechancellor(a)gmail.com>
powerpc: Don't add -mabi= flags when building with Clang
Masahiro Yamada <yamada.masahiro(a)socionext.com>
scripts/kallsyms: fix definitely-lost memory leak
Colin Ian King <colin.king(a)canonical.com>
apparmor: fix unsigned len comparison with less than zero
Vladimir Oltean <vladimir.oltean(a)nxp.com>
gpio: mpc8xxx: Don't overwrite default irq_set_type callback
Bart Van Assche <bvanassche(a)acm.org>
scsi: target: iscsi: Wait for all commands to finish before freeing a session
Anatol Pomazau <anatol(a)google.com>
scsi: iscsi: Don't send data to unbound connection
Finn Thain <fthain(a)telegraphics.com.au>
scsi: NCR5380: Add disconnect_mask module parameter
Maurizio Lombardi <mlombard(a)redhat.com>
scsi: scsi_debug: num_tgts must be >= 0
Subhash Jadavani <subhashj(a)codeaurora.org>
scsi: ufs: Fix error handing during hibern8 enter
peter chang <dpf(a)google.com>
scsi: pm80xx: Fix for SATA device discovery
Kevin Hao <haokexin(a)gmail.com>
watchdog: Fix the race between the release of watchdog_core_data and cdev
Andrew Duggan <aduggan(a)synaptics.com>
HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
Blaž Hrastnik <blaz(a)mxxn.io>
HID: Improve Windows Precision Touchpad detection.
Qian Cai <cai(a)lca.pw>
libnvdimm/btt: fix variable 'rc' set but not used
Doug Berger <opendmb(a)gmail.com>
ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening
Hans de Goede <hdegoede(a)redhat.com>
HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
Jinke Fan <fanjinke(a)hygon.cn>
HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
Coly Li <colyli(a)suse.de>
bcache: at least try to shrink 1 node in bch_mca_scan()
Robert Jarzmik <robert.jarzmik(a)free.fr>
clk: pxa: fix one of the pxa RTC clocks
Finn Thain <fthain(a)telegraphics.com.au>
scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
Gustavo L. F. Walbon <gwalbon(a)linux.ibm.com>
powerpc/security: Fix wrong message when RFI Flush is disable
Tyrel Datwyler <tyreld(a)linux.ibm.com>
PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-info
Tyrel Datwyler <tyreld(a)linux.ibm.com>
PCI: rpaphp: Annotate and correctly byte swap DRC properties
Tyrel Datwyler <tyreld(a)linux.ibm.com>
PCI: rpaphp: Don't rely on firmware feature to imply drc-info support
David Hildenbrand <david(a)redhat.com>
powerpc/pseries/cmm: Implement release() function for sysfs device
Bean Huo <beanhuo(a)micron.com>
scsi: ufs: fix potential bug which ends in system hang
Tyrel Datwyler <tyreld(a)linux.ibm.com>
PCI: rpaphp: Fix up pointer to first drc-info entry
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences
Konstantin Khlebnikov <khlebnikov(a)yandex-team.ru>
fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long
Lee Jones <lee.jones(a)linaro.org>
mfd: mfd-core: Honour Device Tree's request to disable a child-device
Paul Cercueil <paul(a)crapouillou.net>
irqchip: ingenic: Error out if IRQ domain creation failed
Florian Fainelli <f.fainelli(a)gmail.com>
irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary
Michael Hennerich <michael.hennerich(a)analog.com>
clk: clk-gpio: propagate rate change to parent
Jeffrey Hugo <jeffrey.l.hugo(a)gmail.com>
clk: qcom: Allow constant ratio freq tables for rcg
Chao Yu <yuchao0(a)huawei.com>
f2fs: fix to update dir's i_pino during cross_rename
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow
Bart Van Assche <bvanassche(a)acm.org>
scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)
Jan Kara <jack(a)suse.cz>
jbd2: Fix statistics for the number of logged blocks
Matthew Bobrowski <mbobrowski(a)mbobrowski.org>
ext4: iomap that extends beyond EOF should be marked dirty
Matthew Bobrowski <mbobrowski(a)mbobrowski.org>
ext4: update direct I/O read lock pattern for IOCB_NOWAIT
Aneesh Kumar K.V <aneesh.kumar(a)linux.ibm.com>
powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning
Anthony Steinhauser <asteinhauser(a)google.com>
powerpc/security/book3s64: Report L1TF status in sysfs
Geert Uytterhoeven <geert+renesas(a)glider.be>
clocksource/drivers/timer-of: Use unique device name instead of timer
Chuhong Yuan <hslester96(a)gmail.com>
clocksource/drivers/asm9260: Add a check for of_clk_get
Guido Günther <agx(a)sigxcpu.org>
leds: lm3692x: Handle failure to probe the regulator
Eric Dumazet <edumazet(a)google.com>
dma-debug: add a schedule point in debug_dma_dump_mappings()
Michael Ellerman <mpe(a)ellerman.id.au>
powerpc/tools: Don't quote $objdump in scripts
Aneesh Kumar K.V <aneesh.kumar(a)linux.ibm.com>
powerpc/pseries: Don't fail hash page table insert for bolted mapping
Michael Ellerman <mpe(a)ellerman.id.au>
powerpc/pseries: Mark accumulate_stolen_time() as notrace
Xiang Chen <chenxiang66(a)hisilicon.com>
scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec()
Dan Carpenter <dan.carpenter(a)oracle.com>
scsi: csiostor: Don't enable IRQs too early
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices
David Disseldorp <ddiss(a)suse.de>
scsi: target: compare full CHAP_A Algorithm strings
Nicholas Graumann <nick.graumann(a)gmail.com>
dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset
Thierry Reding <treding(a)nvidia.com>
iommu/tegra-smmu: Fix page tables in > 4 GiB memory
Ezequiel Garcia <ezequiel(a)collabora.com>
iommu: rockchip: Free domain on .domain_free
Chao Yu <yuchao0(a)huawei.com>
f2fs: fix to update time in lazytime mode
Evan Green <evgreen(a)chromium.org>
Input: atmel_mxt_ts - disable IRQ across suspend
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Fix locking on mailbox command completion
Sreekanth Reddy <sreekanth.reddy(a)broadcom.com>
scsi: mpt3sas: Fix clear pending bit in ioctl status
James Smart <jsmart2021(a)gmail.com>
scsi: lpfc: Fix discovery failures when target device connectivity bounces
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/compressed/libfdt_env.h | 4 +-
arch/arm/mm/proc-v7-bugs.c | 3 +
arch/powerpc/Makefile | 4 +
arch/powerpc/boot/libfdt_env.h | 2 +
arch/powerpc/include/asm/spinlock.h | 4 +-
arch/powerpc/kernel/security.c | 21 ++--
arch/powerpc/kernel/time.c | 2 +-
arch/powerpc/mm/hash_utils_64.c | 10 +-
arch/powerpc/platforms/pseries/cmm.c | 5 +
arch/powerpc/platforms/pseries/setup.c | 7 --
arch/powerpc/tools/relocs_check.sh | 2 +-
arch/powerpc/tools/unrel_branch_check.sh | 4 +-
arch/s390/kernel/perf_cpum_sf.c | 17 +++-
arch/x86/kernel/cpu/mcheck/mce.c | 2 +-
drivers/cdrom/cdrom.c | 12 ++-
drivers/clk/clk-gpio.c | 2 +-
drivers/clk/pxa/clk-pxa27x.c | 1 +
drivers/clk/qcom/clk-rcg2.c | 2 +
drivers/clk/qcom/common.c | 3 +
drivers/clocksource/asm9260_timer.c | 4 +
drivers/clocksource/timer-of.c | 2 +-
drivers/dma/xilinx/xilinx_dma.c | 1 +
drivers/gpio/gpio-mpc8xxx.c | 3 +-
drivers/hid/hid-core.c | 4 +
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-logitech-hidpp.c | 3 +
drivers/hid/hid-quirks.c | 1 +
drivers/hid/hid-rmi.c | 3 +-
drivers/input/touchscreen/atmel_mxt_ts.c | 4 +
drivers/iommu/rockchip-iommu.c | 7 +-
drivers/iommu/tegra-smmu.c | 11 +-
drivers/irqchip/irq-bcm7038-l1.c | 4 +
drivers/irqchip/irq-ingenic.c | 15 ++-
drivers/leds/leds-lm3692x.c | 13 ++-
drivers/mailbox/imx-mailbox.c | 4 +-
drivers/md/bcache/btree.c | 2 +
drivers/mfd/mfd-core.c | 5 +
drivers/net/bonding/bond_main.c | 3 -
drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +-
drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c | 7 +-
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 14 ++-
drivers/net/gtp.c | 111 ++++++++++++---------
drivers/net/hamradio/6pack.c | 4 +-
drivers/net/hamradio/mkiss.c | 4 +-
drivers/nvdimm/btt.c | 8 +-
drivers/pci/hotplug/rpaphp_core.c | 38 +++----
drivers/pci/switch/switchtec.c | 2 +-
drivers/pinctrl/intel/pinctrl-baytrail.c | 81 ++++++++-------
drivers/ptp/ptp_clock.c | 31 +++---
drivers/ptp/ptp_private.h | 2 +-
drivers/s390/crypto/zcrypt_error.h | 2 +
drivers/scsi/NCR5380.c | 6 +-
drivers/scsi/atari_scsi.c | 6 +-
drivers/scsi/csiostor/csio_lnode.c | 15 +--
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +-
drivers/scsi/iscsi_tcp.c | 8 ++
drivers/scsi/lpfc/lpfc_els.c | 2 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 7 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +-
drivers/scsi/lpfc/lpfc_sli.c | 15 ++-
drivers/scsi/mac_scsi.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 2 +
drivers/scsi/scsi_debug.c | 5 +
drivers/scsi/scsi_trace.c | 11 +-
drivers/scsi/sun3_scsi.c | 4 +-
drivers/scsi/ufs/ufshcd.c | 21 ++--
drivers/spi/spi-fsl-spi.c | 5 +-
drivers/target/iscsi/iscsi_target.c | 10 +-
drivers/target/iscsi/iscsi_target_auth.c | 2 +-
drivers/tty/serial/atmel_serial.c | 43 ++++----
drivers/vhost/vsock.c | 4 +-
drivers/watchdog/watchdog_dev.c | 70 ++++++-------
fs/ext4/inode.c | 16 ++-
fs/f2fs/f2fs.h | 23 +++--
fs/f2fs/inode.c | 6 +-
fs/f2fs/namei.c | 15 ++-
fs/f2fs/super.c | 20 ++--
fs/jbd2/commit.c | 4 +-
fs/ocfs2/acl.c | 4 +-
fs/quota/dquot.c | 29 +++---
fs/readdir.c | 40 ++++++++
fs/userfaultfd.c | 18 ++--
include/linux/hrtimer.h | 14 ++-
include/linux/libfdt_env.h | 3 +
include/linux/posix-clock.h | 19 ++--
include/linux/quota.h | 2 +-
include/linux/rculist_nulls.h | 37 +++++++
include/linux/skbuff.h | 6 +-
include/net/dst.h | 13 ++-
include/net/dst_ops.h | 3 +-
include/net/inet_hashtables.h | 12 ++-
include/net/sock.h | 5 +
include/scsi/iscsi_proto.h | 1 +
kernel/dma/debug.c | 1 +
kernel/sysctl.c | 2 +-
kernel/time/hrtimer.c | 11 +-
kernel/time/posix-clock.c | 31 +++---
net/bridge/br_netfilter_hooks.c | 3 +
net/bridge/br_nf_core.c | 3 +-
net/bridge/netfilter/ebtables.c | 33 +++---
net/core/sysctl_net_core.c | 2 +
net/decnet/dn_route.c | 6 +-
net/ipv4/icmp.c | 11 +-
net/ipv4/inet_connection_sock.c | 2 +-
net/ipv4/inet_diag.c | 3 +-
net/ipv4/inet_hashtables.c | 19 ++--
net/ipv4/inetpeer.c | 12 ++-
net/ipv4/ip_tunnel.c | 2 +-
net/ipv4/ip_vti.c | 2 +-
net/ipv4/route.c | 9 +-
net/ipv4/tcp_ipv4.c | 7 +-
net/ipv4/tcp_output.c | 11 ++
net/ipv4/udp.c | 2 +-
net/ipv4/xfrm4_policy.c | 5 +-
net/ipv6/inet6_connection_sock.c | 2 +-
net/ipv6/inet6_hashtables.c | 3 +-
net/ipv6/ip6_gre.c | 2 +-
net/ipv6/ip6_tunnel.c | 4 +-
net/ipv6/ip6_vti.c | 2 +-
net/ipv6/route.c | 22 ++--
net/ipv6/sit.c | 2 +-
net/ipv6/xfrm6_policy.c | 5 +-
net/netfilter/ipvs/ip_vs_xmit.c | 2 +-
net/netfilter/nf_queue.c | 2 +-
net/sctp/transport.c | 2 +-
scripts/kallsyms.c | 2 +
security/apparmor/label.c | 12 ++-
sound/pci/hda/hda_controller.c | 2 +-
tools/perf/builtin-script.c | 2 +-
tools/perf/util/perf_regs.h | 2 +-
tools/perf/util/strbuf.c | 1 -
134 files changed, 856 insertions(+), 450 deletions(-)
4 years, 10 months
- 8
- 133
[PATCH v1] power: supply: ltc2941-battery-gauge: fix use-after-free
by Sven Van Asbroeck
This driver's remove path calls cancel_delayed_work().
However, that function does not wait until the work function
finishes. This could mean that the work function is still
running after the driver's remove function has finished,
which would result in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
that the work is properly cancelled, no longer running, and
unable to re-schedule itself.
This issue was detected with the help of Coccinelle.
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Sven Van Asbroeck <TheSven73(a)gmail.com>
---
drivers/power/supply/ltc2941-battery-gauge.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
index da49436176cd..30a9014b2f95 100644
--- a/drivers/power/supply/ltc2941-battery-gauge.c
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -449,7 +449,7 @@ static int ltc294x_i2c_remove(struct i2c_client *client)
{
struct ltc294x_info *info = i2c_get_clientdata(client);
- cancel_delayed_work(&info->work);
+ cancel_delayed_work_sync(&info->work);
power_supply_unregister(info->supply);
return 0;
}
--
2.17.1
4 years, 10 months
- 3
- 5
[RFC][PATCH 0/2] Avoiding DWC3 transfer stalls/hangs when using adb over f_fs
by John Stultz
Hey all,
I wanted to send these out for comment and thoughts.
Since ~4.20, when the functionfs gadget enabled scatter-gather
support, we have seen problems with adb connections stalling and
stopping to function on hardware with dwc3 usb controllers.
Specifically, HiKey960, Dragonboard 845c, and Pixel3 devices.
Initally the workaround we used was to simply disable scatter
gather support on the dwc3 by commenting out the
"dwc->gadget.sg_supported = true;" line.
After working with Fei Yang, who was seeing similar trouble on
Intel dwc3 based hardare, Thinh Nguyen mentioned that a fix had
already been found and pointed me to one of Anurag's patches.
This solved the issue on HiKey960 and I sent it out to the list
but didn't get any feedback.
Additional testing with the Dragonboard 845c found that that
first fix was not sufficient, and so I've sat on the fix
thinking something deeper was amiss and went back to the hack
of disabling sg_supported on all dwc3 platforms.
In the following months Fei's continued and repeated efforts
didn't seem to get enough review to result in a fix, and they've
since moved on to other work.
Recently, I found that folks at qcom have seen similer issues
and pointed me to the second patch in this series, which does
seem to resolve the issue on the Dragonboard 845c, but not the
HiKey960 on its own.
So I wanted to send these patches out for comment. There's
clearly a number of folks seeing broken behavior for ahwile on
dwc3 hardware, and we're all seeemingly working around it in our
own ways, so either those individual fixes need to get upstream
or we need to figure out some deeper solution to the issue.
So I wanted to send these two out for review and feedback.
thanks
-john
Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com>
Cc: Yang Fei <fei.yang(a)intel.com>
Cc: Thinh Nguyen <thinhn(a)synopsys.com>
Cc: Tejas Joglekar <tejas.joglekar(a)synopsys.com>
Cc: Andrzej Pietrasiewicz <andrzej.p(a)collabora.com>
Cc: Jack Pham <jackp(a)codeaurora.org>
Cc: Todd Kjos <tkjos(a)google.com>
Cc: Greg KH <gregkh(a)linuxfoundation.org>
Cc: Linux USB List <linux-usb(a)vger.kernel.org>
Cc: stable <stable(a)vger.kernel.org>
Anurag Kumar Vulisha (2):
usb: dwc3: gadget: Check for IOC/LST bit in both event->status and
TRB->ctrl fields
usb: dwc3: gadget: Correct the logic for finding last SG entry
drivers/usb/dwc3/gadget.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--
2.17.1
4 years, 10 months
- 6
- 25
[PATCH] mtd: spi-nor: Fixup page size for S25FS-S
by Alexander X Sverdlin
From: Alexander Sverdlin <alexander.sverdlin(a)nokia.com>
Spansion S25FS-S family has an issue in Basic Flash Parameter Table:
DWORD-11 bits 7-4 specify write page size 512 bytes. In reality this
is configurable in the non-volatile CR3NV register and even factory
default configuration is "wrap at 256 bytes". So blind relying on BFPT
breaks write operation on these Flashes.
All this story is vendor-specific, so add the corresponding fixup hook
which first restores the safe page size of 256 bytes from
struct flash_info but checks is more performant 512 bytes configuration
is active and adjusts the page_size accordingly.
Cc: stable(a)vger.kernel.org
Fixes: f384b352c ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin(a)nokia.com>
---
drivers/mtd/spi-nor/spi-nor.c | 39 +++++++++++++++++++++++++++++++++++++--
include/linux/mtd/spi-nor.h | 5 +++++
2 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 73172d7..18f8705 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1711,6 +1711,39 @@ static struct spi_nor_fixups mx25l25635_fixups = {
.post_bfpt = mx25l25635_post_bfpt_fixups,
};
+/* Spansion S25FS-S SFDP workarounds */
+static int s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ const struct flash_info *info = nor->info;
+ u8 read_opcode, buf;
+ int ret;
+
+ /* Default is safe */
+ params->page_size = info->page_size;
+
+ /*
+ * But is the chip configured for more performant 512 bytes write page
+ * size?
+ */
+ read_opcode = nor->read_opcode;
+
+ nor->read_opcode = SPINOR_OP_RDAR;
+ ret = nor->read(nor, SPINOR_REG_CR3V, 1, &buf);
+ if (!ret && (buf & CR3V_02H_V))
+ params->page_size = 512;
+
+ nor->read_opcode = read_opcode;
+
+ return ret;
+}
+
+static const struct spi_nor_fixups s25fs_s_fixups = {
+ .post_bfpt = s25fs_s_post_bfpt_fixups,
+};
+
/* NOTE: double check command sets and memory organization when you add
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
@@ -1903,7 +1936,8 @@ static const struct flash_info spi_nor_ids[] = {
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
+ { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR)
+ .fixups = &s25fs_s_fixups, },
{ "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
@@ -1913,7 +1947,8 @@ static const struct flash_info spi_nor_ids[] = {
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
+ { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
+ .fixups = &s25fs_s_fixups, },
{ "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
{ "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
{ "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index b3d360b..222eee9 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -114,6 +114,7 @@
/* Used for Spansion flashes only. */
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */
+#define SPINOR_OP_RDAR 0x65 /* Read Any Register */
/* Used for Micron flashes only. */
#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
@@ -149,6 +150,10 @@
/* Status Register 2 bits. */
#define SR2_QUAD_EN_BIT7 BIT(7)
+/* Used for Spansion flashes RDAR command only. */
+#define SPINOR_REG_CR3V 0x800004
+#define CR3V_02H_V BIT(4) /* Page Buffer Wrap */
+
/* Supported SPI protocols */
#define SNOR_PROTO_INST_MASK GENMASK(23, 16)
#define SNOR_PROTO_INST_SHIFT 16
--
2.4.6
4 years, 10 months
- 3
- 3
[PATCH 1/7] Input: pegasus_notetaker: fix endpoint sanity check
by Johan Hovold
The driver was checking the number of endpoints of the first alternate
setting instead of the current one, something which could be used by a
malicious device (or USB descriptor fuzzer) to trigger a NULL-pointer
dereference.
Fixes: 1afca2b66aac ("Input: add Pegasus Notetaker tablet driver")
Cc: stable <stable(a)vger.kernel.org> # 4.8
Cc: Martin Kepplinger <martink(a)posteo.de>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
---
drivers/input/tablet/pegasus_notetaker.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c
index a1f3a0cb197e..38f087404f7a 100644
--- a/drivers/input/tablet/pegasus_notetaker.c
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -275,7 +275,7 @@ static int pegasus_probe(struct usb_interface *intf,
return -ENODEV;
/* Sanity check that the device has an endpoint */
- if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+ if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
dev_err(&intf->dev, "Invalid number of endpoints\n");
return -EINVAL;
}
--
2.24.0
4 years, 10 months
- 4
- 6