November 2020 - Linux-stable-mirror

FAILED: patch "[PATCH] drm/amd/display: Fix ODM policy implementation" failed to apply to 5.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 25b315817216eaac93ca880d736b359ababae61a Mon Sep 17 00:00:00 2001 From: Wesley Chalmers <Wesley.Chalmers(a)amd.com> Date: Tue, 8 Sep 2020 16:22:25 -0400 Subject: [PATCH] drm/amd/display: Fix ODM policy implementation [WHY] Only the leftmost ODM pipe should be offset when scaling. A previous code change was intended to implement this policy, but a section of code was overlooked. Signed-off-by: Wesley Chalmers <Wesley.Chalmers(a)amd.com> Reviewed-by: Aric Cyr <Aric.Cyr(a)amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: <stable(a)vger.kernel.org> diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index 4cea9344d8aa..e430148e47cf 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -785,14 +785,15 @@ static void calculate_recout(struct pipe_ctx *pipe_ctx) /* * Only the leftmost ODM pipe should be offset by a nonzero distance */ - if (!pipe_ctx->prev_odm_pipe) + if (!pipe_ctx->prev_odm_pipe) { data->recout.x = stream->dst.x; - else - data->recout.x = 0; - if (stream->src.x < surf_clip.x) - data->recout.x += (surf_clip.x - stream->src.x) * stream->dst.width + if (stream->src.x < surf_clip.x) + data->recout.x += (surf_clip.x - stream->src.x) * stream->dst.width / stream->src.width; + } else + data->recout.x = 0; + data->recout.width = surf_clip.width * stream->dst.width / stream->src.width; if (data->recout.width + data->recout.x > stream->dst.x + stream->dst.width) data->recout.width = stream->dst.x + stream->dst.width - data->recout.x;

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] drm/amd/pm: increase mclk switch threshold to 200 us" failed to apply to 5.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 83da6eea3af669ee0b1f1bc05ffd6150af984994 Mon Sep 17 00:00:00 2001 From: Evan Quan <evan.quan(a)amd.com> Date: Wed, 2 Sep 2020 16:10:10 +0800 Subject: [PATCH] drm/amd/pm: increase mclk switch threshold to 200 us To avoid underflow seen on Polaris10 with some 3440x1440 144Hz displays. As the threshold of 190 us cuts too close to minVBlankTime of 192 us. Signed-off-by: Evan Quan <evan.quan(a)amd.com> Acked-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index 3bf8be4d107b..1e8919b0acdb 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -2883,7 +2883,7 @@ static int smu7_vblank_too_short(struct pp_hwmgr *hwmgr, if (hwmgr->is_kicker) switch_limit_us = data->is_memory_gddr5 ? 450 : 150; else - switch_limit_us = data->is_memory_gddr5 ? 190 : 150; + switch_limit_us = data->is_memory_gddr5 ? 200 : 150; break; case CHIP_VEGAM: switch_limit_us = 30;

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] drm/amdgpu/swsmu: drop smu i2c bus on navi1x" failed to apply to 5.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 10105d0c9763f058f6a9a09f78397d5bf94dc94c Mon Sep 17 00:00:00 2001 From: Alex Deucher <alexander.deucher(a)amd.com> Date: Mon, 26 Oct 2020 17:30:28 -0400 Subject: [PATCH] drm/amdgpu/swsmu: drop smu i2c bus on navi1x Stop registering the SMU i2c bus on navi1x. This leads to instability issues when userspace processes mess with the bus and also seems to cause display stability issues in some cases. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1314 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1341 Reviewed-by: Evan Quan <evan.quan(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index 8d8081c6bd38..9cf97744b67e 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -2534,29 +2534,6 @@ static const struct i2c_algorithm navi10_i2c_algo = { .functionality = navi10_i2c_func, }; -static int navi10_i2c_control_init(struct smu_context *smu, struct i2c_adapter *control) -{ - struct amdgpu_device *adev = to_amdgpu_device(control); - int res; - - control->owner = THIS_MODULE; - control->class = I2C_CLASS_SPD; - control->dev.parent = &adev->pdev->dev; - control->algo = &navi10_i2c_algo; - snprintf(control->name, sizeof(control->name), "AMDGPU SMU"); - - res = i2c_add_adapter(control); - if (res) - DRM_ERROR("Failed to register hw i2c, err: %d\n", res); - - return res; -} - -static void navi10_i2c_control_fini(struct smu_context *smu, struct i2c_adapter *control) -{ - i2c_del_adapter(control); -} - static ssize_t navi10_get_gpu_metrics(struct smu_context *smu, void **table) { @@ -2687,8 +2664,6 @@ static const struct pptable_funcs navi10_ppt_funcs = { .set_default_dpm_table = navi10_set_default_dpm_table, .dpm_set_vcn_enable = navi10_dpm_set_vcn_enable, .dpm_set_jpeg_enable = navi10_dpm_set_jpeg_enable, - .i2c_init = navi10_i2c_control_init, - .i2c_fini = navi10_i2c_control_fini, .print_clk_levels = navi10_print_clk_levels, .force_clk_levels = navi10_force_clk_levels, .populate_umd_state_clk = navi10_populate_umd_state_clk,

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] i2c: imx: Fix external abort on interrupt in exit paths" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski <krzk(a)kernel.org> Date: Sun, 20 Sep 2020 23:12:38 +0200 Subject: [PATCH] i2c: imx: Fix external abort on interrupt in exit paths If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003 Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0) (free_irq) from [<805844ec>] (release_nodes+0x178/0x284) (release_nodes) from [<80580030>] (really_probe+0x10c/0x348) (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170) (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0) (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec) (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110) (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4) (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc) (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110) (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20) Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens. The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case. Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> Acked-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Signed-off-by: Wolfram Sang <wsa(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 63f4367c312b..c98529c76348 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1169,14 +1169,6 @@ static int i2c_imx_probe(struct platform_device *pdev) return ret; } - /* Request IRQ */ - ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED, - pdev->name, i2c_imx); - if (ret) { - dev_err(&pdev->dev, "can't claim irq %d\n", irq); - goto clk_disable; - } - /* Init queue */ init_waitqueue_head(&i2c_imx->queue); @@ -1195,6 +1187,14 @@ static int i2c_imx_probe(struct platform_device *pdev) if (ret < 0) goto rpm_disable; + /* Request IRQ */ + ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED, + pdev->name, i2c_imx); + if (ret) { + dev_err(&pdev->dev, "can't claim irq %d\n", irq); + goto rpm_disable; + } + /* Set up clock divider */ i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ; ret = of_property_read_u32(pdev->dev.of_node, @@ -1237,13 +1237,12 @@ static int i2c_imx_probe(struct platform_device *pdev) clk_notifier_unregister: clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); + free_irq(irq, i2c_imx); rpm_disable: pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - -clk_disable: clk_disable_unprepare(i2c_imx->clk); return ret; } @@ -1251,7 +1250,7 @@ static int i2c_imx_probe(struct platform_device *pdev) static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); - int ret; + int irq, ret; ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) @@ -1271,6 +1270,9 @@ static int i2c_imx_remove(struct platform_device *pdev) imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, i2c_imx); clk_disable_unprepare(i2c_imx->clk); pm_runtime_put_noidle(&pdev->dev);

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] i2c: imx: Fix external abort on interrupt in exit paths" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski <krzk(a)kernel.org> Date: Sun, 20 Sep 2020 23:12:38 +0200 Subject: [PATCH] i2c: imx: Fix external abort on interrupt in exit paths If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003 Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0) (free_irq) from [<805844ec>] (release_nodes+0x178/0x284) (release_nodes) from [<80580030>] (really_probe+0x10c/0x348) (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170) (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0) (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec) (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110) (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4) (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc) (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110) (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20) Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens. The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case. Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> Acked-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Signed-off-by: Wolfram Sang <wsa(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 63f4367c312b..c98529c76348 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1169,14 +1169,6 @@ static int i2c_imx_probe(struct platform_device *pdev) return ret; } - /* Request IRQ */ - ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED, - pdev->name, i2c_imx); - if (ret) { - dev_err(&pdev->dev, "can't claim irq %d\n", irq); - goto clk_disable; - } - /* Init queue */ init_waitqueue_head(&i2c_imx->queue); @@ -1195,6 +1187,14 @@ static int i2c_imx_probe(struct platform_device *pdev) if (ret < 0) goto rpm_disable; + /* Request IRQ */ + ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED, + pdev->name, i2c_imx); + if (ret) { + dev_err(&pdev->dev, "can't claim irq %d\n", irq); + goto rpm_disable; + } + /* Set up clock divider */ i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ; ret = of_property_read_u32(pdev->dev.of_node, @@ -1237,13 +1237,12 @@ static int i2c_imx_probe(struct platform_device *pdev) clk_notifier_unregister: clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); + free_irq(irq, i2c_imx); rpm_disable: pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - -clk_disable: clk_disable_unprepare(i2c_imx->clk); return ret; } @@ -1251,7 +1250,7 @@ static int i2c_imx_probe(struct platform_device *pdev) static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); - int ret; + int irq, ret; ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) @@ -1271,6 +1270,9 @@ static int i2c_imx_remove(struct platform_device *pdev) imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, i2c_imx); clk_disable_unprepare(i2c_imx->clk); pm_runtime_put_noidle(&pdev->dev);

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] i2c: imx: Fix external abort on interrupt in exit paths" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski <krzk(a)kernel.org> Date: Sun, 20 Sep 2020 23:12:38 +0200 Subject: [PATCH] i2c: imx: Fix external abort on interrupt in exit paths If interrupt comes late, during probe error path or device remove (could be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler i2c_imx_isr() will access registers with the clock being disabled. This leads to external abort on non-linefetch on Toradex Colibri VF50 module (with Vybrid VF5xx): Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003 Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) (i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0) (free_irq) from [<805844ec>] (release_nodes+0x178/0x284) (release_nodes) from [<80580030>] (really_probe+0x10c/0x348) (really_probe) from [<80580380>] (driver_probe_device+0x60/0x170) (driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60) (device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0) (__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4) (bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec) (bus_add_driver) from [<80581320>] (driver_register+0x78/0x110) (driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4) (do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc) (kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110) (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20) Additionally, the i2c_imx_isr() could wake up the wait queue (imx_i2c_struct->queue) before its initialization happens. The resource-managed framework should not be used for interrupt handling, because the resource will be released too late - after disabling clocks. The interrupt handler is not prepared for such case. Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> Acked-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Signed-off-by: Wolfram Sang <wsa(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 63f4367c312b..c98529c76348 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1169,14 +1169,6 @@ static int i2c_imx_probe(struct platform_device *pdev) return ret; } - /* Request IRQ */ - ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED, - pdev->name, i2c_imx); - if (ret) { - dev_err(&pdev->dev, "can't claim irq %d\n", irq); - goto clk_disable; - } - /* Init queue */ init_waitqueue_head(&i2c_imx->queue); @@ -1195,6 +1187,14 @@ static int i2c_imx_probe(struct platform_device *pdev) if (ret < 0) goto rpm_disable; + /* Request IRQ */ + ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED, + pdev->name, i2c_imx); + if (ret) { + dev_err(&pdev->dev, "can't claim irq %d\n", irq); + goto rpm_disable; + } + /* Set up clock divider */ i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ; ret = of_property_read_u32(pdev->dev.of_node, @@ -1237,13 +1237,12 @@ static int i2c_imx_probe(struct platform_device *pdev) clk_notifier_unregister: clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); + free_irq(irq, i2c_imx); rpm_disable: pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - -clk_disable: clk_disable_unprepare(i2c_imx->clk); return ret; } @@ -1251,7 +1250,7 @@ static int i2c_imx_probe(struct platform_device *pdev) static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); - int ret; + int irq, ret; ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) @@ -1271,6 +1270,9 @@ static int i2c_imx_remove(struct platform_device *pdev) imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); + irq = platform_get_irq(pdev, 0); + if (irq >= 0) + free_irq(irq, i2c_imx); clk_disable_unprepare(i2c_imx->clk); pm_runtime_put_noidle(&pdev->dev);

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] rtc: rx8010: don't modify the global rtc ops" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d3b14296da69adb7825022f3224ac6137eb30abf Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Date: Mon, 14 Sep 2020 17:45:48 +0200 Subject: [PATCH] rtc: rx8010: don't modify the global rtc ops The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index fe010151ec8f..08c93d492494 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -407,16 +407,26 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) } } -static struct rtc_class_ops rx8010_rtc_ops = { +static const struct rtc_class_ops rx8010_rtc_ops_default = { .read_time = rx8010_get_time, .set_time = rx8010_set_time, .ioctl = rx8010_ioctl, }; +static const struct rtc_class_ops rx8010_rtc_ops_alarm = { + .read_time = rx8010_get_time, + .set_time = rx8010_set_time, + .ioctl = rx8010_ioctl, + .read_alarm = rx8010_read_alarm, + .set_alarm = rx8010_set_alarm, + .alarm_irq_enable = rx8010_alarm_irq_enable, +}; + static int rx8010_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = client->adapter; + const struct rtc_class_ops *rtc_ops; struct rx8010_data *rx8010; int err = 0; @@ -447,16 +457,16 @@ static int rx8010_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "unable to request IRQ\n"); - client->irq = 0; - } else { - rx8010_rtc_ops.read_alarm = rx8010_read_alarm; - rx8010_rtc_ops.set_alarm = rx8010_set_alarm; - rx8010_rtc_ops.alarm_irq_enable = rx8010_alarm_irq_enable; + return err; } + + rtc_ops = &rx8010_rtc_ops_alarm; + } else { + rtc_ops = &rx8010_rtc_ops_default; } rx8010->rtc = devm_rtc_device_register(&client->dev, client->name, - &rx8010_rtc_ops, THIS_MODULE); + rtc_ops, THIS_MODULE); if (IS_ERR(rx8010->rtc)) { dev_err(&client->dev, "unable to register the class device\n");

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] rtc: rx8010: don't modify the global rtc ops" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d3b14296da69adb7825022f3224ac6137eb30abf Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Date: Mon, 14 Sep 2020 17:45:48 +0200 Subject: [PATCH] rtc: rx8010: don't modify the global rtc ops The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index fe010151ec8f..08c93d492494 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -407,16 +407,26 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) } } -static struct rtc_class_ops rx8010_rtc_ops = { +static const struct rtc_class_ops rx8010_rtc_ops_default = { .read_time = rx8010_get_time, .set_time = rx8010_set_time, .ioctl = rx8010_ioctl, }; +static const struct rtc_class_ops rx8010_rtc_ops_alarm = { + .read_time = rx8010_get_time, + .set_time = rx8010_set_time, + .ioctl = rx8010_ioctl, + .read_alarm = rx8010_read_alarm, + .set_alarm = rx8010_set_alarm, + .alarm_irq_enable = rx8010_alarm_irq_enable, +}; + static int rx8010_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = client->adapter; + const struct rtc_class_ops *rtc_ops; struct rx8010_data *rx8010; int err = 0; @@ -447,16 +457,16 @@ static int rx8010_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "unable to request IRQ\n"); - client->irq = 0; - } else { - rx8010_rtc_ops.read_alarm = rx8010_read_alarm; - rx8010_rtc_ops.set_alarm = rx8010_set_alarm; - rx8010_rtc_ops.alarm_irq_enable = rx8010_alarm_irq_enable; + return err; } + + rtc_ops = &rx8010_rtc_ops_alarm; + } else { + rtc_ops = &rx8010_rtc_ops_default; } rx8010->rtc = devm_rtc_device_register(&client->dev, client->name, - &rx8010_rtc_ops, THIS_MODULE); + rtc_ops, THIS_MODULE); if (IS_ERR(rx8010->rtc)) { dev_err(&client->dev, "unable to register the class device\n");

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] rtc: rx8010: don't modify the global rtc ops" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From d3b14296da69adb7825022f3224ac6137eb30abf Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Date: Mon, 14 Sep 2020 17:45:48 +0200 Subject: [PATCH] rtc: rx8010: don't modify the global rtc ops The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski(a)baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index fe010151ec8f..08c93d492494 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -407,16 +407,26 @@ static int rx8010_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) } } -static struct rtc_class_ops rx8010_rtc_ops = { +static const struct rtc_class_ops rx8010_rtc_ops_default = { .read_time = rx8010_get_time, .set_time = rx8010_set_time, .ioctl = rx8010_ioctl, }; +static const struct rtc_class_ops rx8010_rtc_ops_alarm = { + .read_time = rx8010_get_time, + .set_time = rx8010_set_time, + .ioctl = rx8010_ioctl, + .read_alarm = rx8010_read_alarm, + .set_alarm = rx8010_set_alarm, + .alarm_irq_enable = rx8010_alarm_irq_enable, +}; + static int rx8010_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct i2c_adapter *adapter = client->adapter; + const struct rtc_class_ops *rtc_ops; struct rx8010_data *rx8010; int err = 0; @@ -447,16 +457,16 @@ static int rx8010_probe(struct i2c_client *client, if (err) { dev_err(&client->dev, "unable to request IRQ\n"); - client->irq = 0; - } else { - rx8010_rtc_ops.read_alarm = rx8010_read_alarm; - rx8010_rtc_ops.set_alarm = rx8010_set_alarm; - rx8010_rtc_ops.alarm_irq_enable = rx8010_alarm_irq_enable; + return err; } + + rtc_ops = &rx8010_rtc_ops_alarm; + } else { + rtc_ops = &rx8010_rtc_ops_default; } rx8010->rtc = devm_rtc_device_register(&client->dev, client->name, - &rx8010_rtc_ops, THIS_MODULE); + rtc_ops, THIS_MODULE); if (IS_ERR(rx8010->rtc)) { dev_err(&client->dev, "unable to register the class device\n");

4 years, 5 months

1
0
0 0

FAILED: patch "[PATCH] perf python scripting: Fix printable strings in python3" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 6fcd5ddc3b1467b3586972ef785d0d926ae4cdf4 Mon Sep 17 00:00:00 2001 From: Jiri Olsa <jolsa(a)kernel.org> Date: Mon, 28 Sep 2020 22:11:35 +0200 Subject: [PATCH] perf python scripting: Fix printable strings in python3 scripts Hagen reported broken strings in python3 tracepoint scripts: make PYTHON=python3 perf record -e sched:sched_switch -a -- sleep 5 perf script --gen-script py perf script -s ./perf-script.py [..] sched__sched_switch 7 563231.759525792 0 swapper prev_comm=bytearray(b'swapper/7\x00\x00\x00\x00\x00\x00\x00'), prev_pid=0, prev_prio=120, prev_state=, next_comm=bytearray(b'mutex-thread-co\x00'), The problem is in the is_printable_array function that does not take the zero byte into account and claim such string as not printable, so the code will create byte array instead of string. Committer testing: After this fix: sched__sched_switch 3 484522.497072626 1158680 kworker/3:0-eve prev_comm=kworker/3:0, prev_pid=1158680, prev_prio=120, prev_state=I, next_comm=swapper/3, next_pid=0, next_prio=120 Sample: {addr=0, cpu=3, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1158680, tid=1158680, time=484522497072626, transaction=0, values=[(0, 0)], weight=0} sched__sched_switch 4 484522.497085610 1225814 perf prev_comm=perf, prev_pid=1225814, prev_prio=120, prev_state=, next_comm=migration/4, next_pid=30, next_prio=0 Sample: {addr=0, cpu=4, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1225814, tid=1225814, time=484522497085610, transaction=0, values=[(0, 0)], weight=0} Fixes: 249de6e07458 ("perf script python: Fix string vs byte array resolving") Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Tested-by: Hagen Paul Pfeifer <hagen(a)jauu.net> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Michael Petlan <mpetlan(a)redhat.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: stable(a)vger.kernel.org Link: http://lore.kernel.org/lkml/20200928201135.3633850-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> diff --git a/tools/perf/util/print_binary.c b/tools/perf/util/print_binary.c index 599a1543871d..13fdc51c61d9 100644 --- a/tools/perf/util/print_binary.c +++ b/tools/perf/util/print_binary.c @@ -50,7 +50,7 @@ int is_printable_array(char *p, unsigned int len) len--; - for (i = 0; i < len; i++) { + for (i = 0; i < len && p[i]; i++) { if (!isprint(p[i]) && !isspace(p[i])) return 0; }

4 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2020