October 2024 - Linux-stable-mirror

[PATCH 6.1] Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails

by Xiangyu Chen

From: Rick Edgecombe <rick.p.edgecombe(a)intel.com> In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens. Signed-off-by: Rick Edgecombe <rick.p.edgecombe(a)intel.com> Signed-off-by: Michael Kelley <mhklinux(a)outlook.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy(a)linux.intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Link: https://lore.kernel.org/r/20240311161558.1310-2-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu(a)kernel.org> Message-ID: <20240311161558.1310-2-mhklinux(a)outlook.com> [Xiangyu: Modified to apply on 6.1.y] Signed-off-by: Xiangyu Chen <xiangyu.chen(a)windriver.com> --- drivers/hv/connection.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index da51b50787df..c74088b69a5f 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -243,8 +243,17 @@ int vmbus_connect(void) ret |= set_memory_decrypted((unsigned long) vmbus_connection.monitor_pages[1], 1); - if (ret) + if (ret) { + /* + * If set_memory_decrypted() fails, the encryption state + * of the memory is unknown. So leak the memory instead + * of risking returning decrypted memory to the free list. + * For simplicity, always handle both pages the same. + */ + vmbus_connection.monitor_pages[0] = NULL; + vmbus_connection.monitor_pages[1] = NULL; goto cleanup; + } /* * Isolation VM with AMD SNP needs to access monitor page via -- 2.43.0

7 months, 1 week

3
4
0 0

[PATCH net 0/4] mptcp: misc. fixes involving fallback to TCP

by Matthieu Baerts (NGI0)

- Patch 1: better handle DSS corruptions from a bugged peer: reducing warnings, doing a fallback or a reset depending on the subflow state. For >= v5.7. - Patch 2: fix DSS corruption due to large pmtu xmit, where MPTCP was not taken into account. For >= v5.6. - Patch 3: fallback when MPTCP opts are dropped after the first data packet, instead of resetting the connection. For >= v5.6. - Patch 4: restrict the removal of a subflow to other closing states, a better fix, for a recent one. For >= v5.10. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Matthieu Baerts (NGI0) (2): mptcp: fallback when MPTCP opts are dropped after 1st data mptcp: pm: do not remove closing subflows Paolo Abeni (2): mptcp: handle consistently DSS corruption tcp: fix mptcp DSS corruption due to large pmtu xmit net/ipv4/tcp_output.c | 5 +---- net/mptcp/mib.c | 2 ++ net/mptcp/mib.h | 2 ++ net/mptcp/pm_netlink.c | 3 ++- net/mptcp/protocol.c | 24 +++++++++++++++++++++--- net/mptcp/subflow.c | 6 ++++-- 6 files changed, 32 insertions(+), 10 deletions(-) --- base-commit: f15b8d6eb63874230e36a45dd24239050a6f6250 change-id: 20241008-net-mptcp-fallback-fixes-16a9afee238e Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

7 months, 1 week

2
5
0 0

[PATCH] spmi: pmic-arb: fix return path in for_each_available_child_of_node()

by Javier Carrasco

This loop requires explicit calls to of_node_put() upon early exits (break, goto, return) to decrement the child refcounter and avoid memory leaks if the child is not required out of the loop. A more robust solution is using the scoped variant of the macro, which automatically calls of_node_put() when the child goes out of scope. Cc: stable(a)vger.kernel.org Fixes: 979987371739 ("spmi: pmic-arb: Add multi bus support") Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> --- drivers/spmi/spmi-pmic-arb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 9ba9495fcc4b..ea843159b745 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -1763,14 +1763,13 @@ static int spmi_pmic_arb_register_buses(struct spmi_pmic_arb *pmic_arb, { struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; - struct device_node *child; int ret; /* legacy mode doesn't provide child node for the bus */ if (of_device_is_compatible(node, "qcom,spmi-pmic-arb")) return spmi_pmic_arb_bus_init(pdev, node, pmic_arb); - for_each_available_child_of_node(node, child) { + for_each_available_child_of_node_scoped(node, child) { if (of_node_name_eq(child, "spmi")) { ret = spmi_pmic_arb_bus_init(pdev, child, pmic_arb); if (ret) --- base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc change-id: 20241001-spmi-pmic-arb-scoped-a4b90179edef Best regards, -- Javier Carrasco <javier.carrasco.cruz(a)gmail.com>

7 months, 1 week

3
2
0 0

[PATCH 1/1] selftests/rseq: Fix mm_cid test failure

by Mathieu Desnoyers

Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by: glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)") Without this fix, rseq selftests for mm_cid fail: ./run_param_test.sh Default parameters Running test spinlock Running compare-twice test spinlock Running mm_cid test spinlock Error: cpu id getter unavailable [ This is based on the following branch: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git branch: fixes ] Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Peter Zijlstra <peterz(a)infradead.org> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Shuah Khan <skhan(a)linuxfoundation.org> CC: Carlos O'Donell <carlos(a)redhat.com> CC: Florian Weimer <fweimer(a)redhat.com> CC: linux-kselftest(a)vger.kernel.org CC: stable(a)vger.kernel.org --- tools/testing/selftests/rseq/rseq.c | 110 +++++++++++++++++++--------- tools/testing/selftests/rseq/rseq.h | 10 +-- 2 files changed, 77 insertions(+), 43 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 96e812bdf8a4..5b9772cdf265 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -60,12 +60,6 @@ unsigned int rseq_size = -1U; /* Flags used during rseq registration. */ unsigned int rseq_flags; -/* - * rseq feature size supported by the kernel. 0 if the registration was - * unsuccessful. - */ -unsigned int rseq_feature_size = -1U; - static int rseq_ownership; static int rseq_reg_success; /* At least one rseq registration has succeded. */ @@ -111,6 +105,43 @@ int rseq_available(void) } } +/* The rseq areas need to be at least 32 bytes. */ +static +unsigned int get_rseq_min_alloc_size(void) +{ + unsigned int alloc_size = rseq_size; + + if (alloc_size < ORIG_RSEQ_ALLOC_SIZE) + alloc_size = ORIG_RSEQ_ALLOC_SIZE; + return alloc_size; +} + +/* + * Return the feature size supported by the kernel. + * + * Depending on the value returned by getauxval(AT_RSEQ_FEATURE_SIZE): + * + * 0: Return ORIG_RSEQ_FEATURE_SIZE (20) + * > 0: Return the value from getauxval(AT_RSEQ_FEATURE_SIZE). + * + * It should never return a value below ORIG_RSEQ_FEATURE_SIZE. + */ +static +unsigned int get_rseq_kernel_feature_size(void) +{ + unsigned long auxv_rseq_feature_size, auxv_rseq_align; + + auxv_rseq_align = getauxval(AT_RSEQ_ALIGN); + assert(!auxv_rseq_align || auxv_rseq_align <= RSEQ_THREAD_AREA_ALLOC_SIZE); + + auxv_rseq_feature_size = getauxval(AT_RSEQ_FEATURE_SIZE); + assert(!auxv_rseq_feature_size || auxv_rseq_feature_size <= RSEQ_THREAD_AREA_ALLOC_SIZE); + if (auxv_rseq_feature_size) + return auxv_rseq_feature_size; + else + return ORIG_RSEQ_FEATURE_SIZE; +} + int rseq_register_current_thread(void) { int rc; @@ -119,7 +150,7 @@ int rseq_register_current_thread(void) /* Treat libc's ownership as a successful registration. */ return 0; } - rc = sys_rseq(&__rseq_abi, rseq_size, 0, RSEQ_SIG); + rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { if (RSEQ_READ_ONCE(rseq_reg_success)) { /* Incoherent success/failure within process. */ @@ -140,28 +171,12 @@ int rseq_unregister_current_thread(void) /* Treat libc's ownership as a successful unregistration. */ return 0; } - rc = sys_rseq(&__rseq_abi, rseq_size, RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG); + rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG); if (rc) return -1; return 0; } -static -unsigned int get_rseq_feature_size(void) -{ - unsigned long auxv_rseq_feature_size, auxv_rseq_align; - - auxv_rseq_align = getauxval(AT_RSEQ_ALIGN); - assert(!auxv_rseq_align || auxv_rseq_align <= RSEQ_THREAD_AREA_ALLOC_SIZE); - - auxv_rseq_feature_size = getauxval(AT_RSEQ_FEATURE_SIZE); - assert(!auxv_rseq_feature_size || auxv_rseq_feature_size <= RSEQ_THREAD_AREA_ALLOC_SIZE); - if (auxv_rseq_feature_size) - return auxv_rseq_feature_size; - else - return ORIG_RSEQ_FEATURE_SIZE; -} - static __attribute__((constructor)) void rseq_init(void) { @@ -178,28 +193,54 @@ void rseq_init(void) } if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p && *libc_rseq_size_p != 0) { + unsigned int libc_rseq_size; + /* rseq registration owned by glibc */ rseq_offset = *libc_rseq_offset_p; - rseq_size = *libc_rseq_size_p; + libc_rseq_size = *libc_rseq_size_p; rseq_flags = *libc_rseq_flags_p; - rseq_feature_size = get_rseq_feature_size(); - if (rseq_feature_size > rseq_size) - rseq_feature_size = rseq_size; + + /* + * Previous versions of glibc expose the value + * 32 even though the kernel only supported 20 + * bytes initially. Therefore treat 32 as a + * special-case. glibc 2.40 exposes a 20 bytes + * __rseq_size without using getauxval(3) to + * query the supported size, while still allocating a 32 + * bytes area. Also treat 20 as a special-case. + * + * Special-cases are handled by using the following + * value as active feature set size: + * + * rseq_size = min(32, get_rseq_kernel_feature_size()) + */ + switch (libc_rseq_size) { + case ORIG_RSEQ_FEATURE_SIZE: + fallthrough; + case ORIG_RSEQ_ALLOC_SIZE: + { + unsigned int rseq_kernel_feature_size = get_rseq_kernel_feature_size(); + + if (rseq_kernel_feature_size < ORIG_RSEQ_ALLOC_SIZE) + rseq_size = rseq_kernel_feature_size; + else + rseq_size = ORIG_RSEQ_ALLOC_SIZE; + break; + } + default: + /* Otherwise just use the __rseq_size from libc as rseq_size. */ + rseq_size = libc_rseq_size; + break; + } return; } rseq_ownership = 1; if (!rseq_available()) { rseq_size = 0; - rseq_feature_size = 0; return; } rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); rseq_flags = 0; - rseq_feature_size = get_rseq_feature_size(); - if (rseq_feature_size == ORIG_RSEQ_FEATURE_SIZE) - rseq_size = ORIG_RSEQ_ALLOC_SIZE; - else - rseq_size = RSEQ_THREAD_AREA_ALLOC_SIZE; } static __attribute__((destructor)) @@ -209,7 +250,6 @@ void rseq_exit(void) return; rseq_offset = 0; rseq_size = -1U; - rseq_feature_size = -1U; rseq_ownership = 0; } diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index d7364ea4d201..4e217b620e0c 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -68,12 +68,6 @@ extern unsigned int rseq_size; /* Flags used during rseq registration. */ extern unsigned int rseq_flags; -/* - * rseq feature size supported by the kernel. 0 if the registration was - * unsuccessful. - */ -extern unsigned int rseq_feature_size; - enum rseq_mo { RSEQ_MO_RELAXED = 0, RSEQ_MO_CONSUME = 1, /* Unused */ @@ -193,7 +187,7 @@ static inline uint32_t rseq_current_cpu(void) static inline bool rseq_node_id_available(void) { - return (int) rseq_feature_size >= rseq_offsetofend(struct rseq_abi, node_id); + return (int) rseq_size >= rseq_offsetofend(struct rseq_abi, node_id); } /* @@ -207,7 +201,7 @@ static inline uint32_t rseq_current_node_id(void) static inline bool rseq_mm_cid_available(void) { - return (int) rseq_feature_size >= rseq_offsetofend(struct rseq_abi, mm_cid); + return (int) rseq_size >= rseq_offsetofend(struct rseq_abi, mm_cid); } static inline uint32_t rseq_current_mm_cid(void) -- 2.39.2

7 months, 1 week

2
1
0 0

[PATCH 1/1] nfsd: fix possible badness in FREE_STATEID

by Olga Kornievskaia

When multiple FREE_STATEIDs are sent for the same delegation stateid, it can lead to a possible either use-after-tree or counter refcount underflow errors. In nfsd4_free_stateid() under the client lock we find a delegation stateid, however the code drops the lock before calling nfs4_put_stid(), that allows another FREE_STATE to find the stateid again. The first one will proceed to then free the stateid which leads to either use-after-free or decrementing already zerod counter. CC: stable(a)vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev(a)redhat.com> --- fs/nfsd/nfs4state.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index ac1859c7cc9d..56b261608af4 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -7154,6 +7154,7 @@ nfsd4_free_stateid(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, switch (s->sc_type) { case SC_TYPE_DELEG: if (s->sc_status & SC_STATUS_REVOKED) { + s->sc_status |= SC_STATUS_CLOSED; spin_unlock(&s->sc_lock); dp = delegstateid(s); list_del_init(&dp->dl_recall_lru); -- 2.43.5

7 months, 1 week

8
10
0 0

[PATCH v10 2/2] ufs: core: requeue aborted request

by peter.wang＠mediatek.com

From: Peter Wang <peter.wang(a)mediatek.com> After the SQ cleanup fix, the CQ will receive a response with the corresponding tag marked as OCS: ABORTED. To align with the behavior of Legacy SDB mode, the handling of OCS: ABORTED has been changed to match that of OCS_INVALID_COMMAND_STATUS (SDB), with both returning a SCSI result of DID_REQUEUE. Furthermore, the workaround implemented before the SQ cleanup fix can be removed. Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode") Cc: stable(a)vger.kernel.org Signed-off-by: Peter Wang <peter.wang(a)mediatek.com> --- drivers/ufs/core/ufshcd.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 24a32e2fd75e..8e2a7889a565 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -5417,10 +5417,12 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp, } break; case OCS_ABORTED: - result |= DID_ABORT << 16; - break; case OCS_INVALID_COMMAND_STATUS: result |= DID_REQUEUE << 16; + dev_warn(hba->dev, + "OCS %s from controller for tag %d\n", + (ocs == OCS_ABORTED? "aborted" : "invalid"), + lrbp->task_tag); break; case OCS_INVALID_CMD_TABLE_ATTR: case OCS_INVALID_PRDT_ATTR: @@ -6466,26 +6468,12 @@ static bool ufshcd_abort_one(struct request *rq, void *priv) struct scsi_device *sdev = cmd->device; struct Scsi_Host *shost = sdev->host; struct ufs_hba *hba = shost_priv(shost); - struct ufshcd_lrb *lrbp = &hba->lrb[tag]; - struct ufs_hw_queue *hwq; - unsigned long flags; *ret = ufshcd_try_to_abort_task(hba, tag); dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1, *ret ? "failed" : "succeeded"); - /* Release cmd in MCQ mode if abort succeeds */ - if (hba->mcq_enabled && (*ret == 0)) { - hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(lrbp->cmd)); - if (!hwq) - return 0; - spin_lock_irqsave(&hwq->cq_lock, flags); - if (ufshcd_cmd_inflight(lrbp->cmd)) - ufshcd_release_scsi_cmd(hba, lrbp); - spin_unlock_irqrestore(&hwq->cq_lock, flags); - } - return *ret == 0; } -- 2.45.2

7 months, 1 week

2
1
0 0

[PATCH] firmware/psci: fix missing '%u' format literal in kthread_create_on_cpu()

by Alexander Lobakin

kthread_create_on_cpu() always requires format string to contain one '%u' at the end, as it automatically adds the CPU ID when passing it to kthread_create_on_node(). The former isn't marked as __printf() as it's not printf-like itself, which effectively hides this from the compiler. If you convert this function to printf-like, you'll see the following: In file included from drivers/firmware/psci/psci_checker.c:15: drivers/firmware/psci/psci_checker.c: In function 'suspend_tests': drivers/firmware/psci/psci_checker.c:401:48: warning: too many arguments for format [-Wformat-extra-args] 401 | "psci_suspend_test"); | ^~~~~~~~~~~~~~~~~~~ drivers/firmware/psci/psci_checker.c:400:32: warning: data argument not used by format string [-Wformat-extra-args] 400 | (void *)(long)cpu, cpu, | ^ 401 | "psci_suspend_test"); | ~~~~~~~~~~~~~~~~~~~ Add the missing format literal to fix this. Now the corresponding kthread will be named as "psci_suspend_test-<cpuid>", as it's meant by kthread_create_on_cpu(). Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408141012.KhvKaxoh-lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202408141243.eQiEOQQe-lkp@intel.com Fixes: ea8b1c4a6019 ("drivers: psci: PSCI checker module") Cc: stable(a)vger.kernel.org # 4.10+ Signed-off-by: Alexander Lobakin <aleksander.lobakin(a)intel.com> --- drivers/firmware/psci/psci_checker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/psci/psci_checker.c b/drivers/firmware/psci/psci_checker.c index 116eb465cdb4..ecc511c745ce 100644 --- a/drivers/firmware/psci/psci_checker.c +++ b/drivers/firmware/psci/psci_checker.c @@ -398,7 +398,7 @@ static int suspend_tests(void) thread = kthread_create_on_cpu(suspend_test_thread, (void *)(long)cpu, cpu, - "psci_suspend_test"); + "psci_suspend_test-%u"); if (IS_ERR(thread)) pr_err("Failed to create kthread on CPU %d\n", cpu); else -- 2.46.2

7 months, 1 week

3
3
0 0

[tip: x86/urgent] x86/bugs: Use code segment selector for VERW operand

by tip-bot2 for Pawan Gupta

The following commit has been merged into the x86/urgent branch of tip: Commit-ID: 785bf1ab58aa1f89a5dfcb17b682b7089d69c34f Gitweb: https://git.kernel.org/tip/785bf1ab58aa1f89a5dfcb17b682b7089d69c34f Author: Pawan Gupta <pawan.kumar.gupta(a)linux.intel.com> AuthorDate: Thu, 26 Sep 2024 09:10:31 -07:00 Committer: Dave Hansen <dave.hansen(a)linux.intel.com> CommitterDate: Tue, 08 Oct 2024 15:19:21 -07:00 x86/bugs: Use code segment selector for VERW operand Robert Gill reported below #GP in 32-bit mode when dosemu software was executing vm86() system call: general protection fault: 0000 [#1] PREEMPT SMP CPU: 4 PID: 4610 Comm: dosemu.bin Not tainted 6.6.21-gentoo-x86 #1 Hardware name: Dell Inc. PowerEdge 1950/0H723K, BIOS 2.7.0 10/30/2010 EIP: restore_all_switch_stack+0xbe/0xcf EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: ff8affdc DS: 0000 ES: 0000 FS: 0000 GS: 0033 SS: 0068 EFLAGS: 00010046 CR0: 80050033 CR2: 00c2101c CR3: 04b6d000 CR4: 000406d0 Call Trace: show_regs+0x70/0x78 die_addr+0x29/0x70 exc_general_protection+0x13c/0x348 exc_bounds+0x98/0x98 handle_exception+0x14d/0x14d exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf exc_bounds+0x98/0x98 restore_all_switch_stack+0xbe/0xcf This only happens in 32-bit mode when VERW based mitigations like MDS/RFDS are enabled. This is because segment registers with an arbitrary user value can result in #GP when executing VERW. Intel SDM vol. 2C documents the following behavior for VERW instruction: #GP(0) - If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. CLEAR_CPU_BUFFERS macro executes VERW instruction before returning to user space. Use %cs selector to reference VERW operand. This ensures VERW will not #GP for an arbitrary user %ds. Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition") Reported-by: Robert Gill <rtgill82(a)gmail.com> Reviewed-by: Andrew Cooper <andrew.cooper3(a)citrix.com Cc: stable(a)vger.kernel.org # 5.10+ Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218707 Closes: https://lore.kernel.org/all/8c77ccfd-d561-45a1-8ed5-6b75212c7a58@leemhuis.i… Suggested-by: Dave Hansen <dave.hansen(a)linux.intel.com> Suggested-by: Brian Gerst <brgerst(a)gmail.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta(a)linux.intel.com> --- arch/x86/include/asm/nospec-branch.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h index ff5f1ec..96b410b 100644 --- a/arch/x86/include/asm/nospec-branch.h +++ b/arch/x86/include/asm/nospec-branch.h @@ -323,7 +323,16 @@ * Note: Only the memory operand variant of VERW clears the CPU buffers. */ .macro CLEAR_CPU_BUFFERS - ALTERNATIVE "", __stringify(verw _ASM_RIP(mds_verw_sel)), X86_FEATURE_CLEAR_CPU_BUF +#ifdef CONFIG_X86_64 + ALTERNATIVE "", "verw mds_verw_sel(%rip)", X86_FEATURE_CLEAR_CPU_BUF +#else + /* + * In 32bit mode, the memory operand must be a %cs reference. The data + * segments may not be usable (vm86 mode), and the stack segment may not + * be flat (ESPFIX32). + */ + ALTERNATIVE "", "verw %cs:mds_verw_sel", X86_FEATURE_CLEAR_CPU_BUF +#endif .endm #ifdef CONFIG_X86_64

7 months, 1 week

5
6
0 0

[PATCH v3 4/9] serial: qcom-geni: fix dma rx cancellation

by Johan Hovold

Make sure to wait for the DMA transfer to complete when cancelling the rx command on stop_rx(). This specifically prevents the DMA completion interrupt from firing after rx has been restarted, something which can lead to an IOMMU fault and hosed rx when the interrupt handler unmaps the DMA buffer for the new command: qcom_geni_serial 988000.serial: serial engine reports 0 RX bytes in! arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x563 arm-smmu 15000000.iommu: FSYNR0 = 00210013 [S1CBNDX=33 WNR PLVL=3] Bluetooth: hci0: command 0xfc00 tx timeout Bluetooth: hci0: Reading QCA version information failed (-110) Also add the missing state machine reset which is needed in case cancellation fails. Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable(a)vger.kernel.org # 6.3 Cc: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/tty/serial/qcom_geni_serial.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 87cd974b76bf..aaf24bd037a7 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -805,17 +805,27 @@ static void qcom_geni_serial_start_rx_fifo(struct uart_port *uport) static void qcom_geni_serial_stop_rx_dma(struct uart_port *uport) { struct qcom_geni_serial_port *port = to_dev_port(uport); + bool done; if (!qcom_geni_serial_secondary_active(uport)) return; geni_se_cancel_s_cmd(&port->se); - qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, - S_CMD_CANCEL_EN, true); - - if (qcom_geni_serial_secondary_active(uport)) + done = qcom_geni_serial_poll_bit(uport, SE_DMA_RX_IRQ_STAT, + RX_EOT, true); + if (done) { + writel(RX_EOT | RX_DMA_DONE, + uport->membase + SE_DMA_RX_IRQ_CLR); + } else { qcom_geni_serial_abort_rx(uport); + writel(1, uport->membase + SE_DMA_RX_FSM_RST); + qcom_geni_serial_poll_bit(uport, SE_DMA_RX_IRQ_STAT, + RX_RESET_DONE, true); + writel(RX_RESET_DONE | RX_DMA_DONE, + uport->membase + SE_DMA_RX_IRQ_CLR); + } + if (port->rx_dma_addr) { geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, DMA_RX_BUF_SIZE); -- 2.45.2

7 months, 1 week

1
0
0 0

[PATCH v3 2/9] serial: qcom-geni: revert broken hibernation support

by Johan Hovold

This reverts commit 35781d8356a2eecaa6074ceeb80ee22e252fcdae. Hibernation is not supported on Qualcomm platforms with mainline kernels yet a broken vendor implementation for the GENI serial driver made it upstream. This is effectively dead code that cannot be tested and should just be removed, but if these paths were ever hit for an open non-console port they would crash the machine as the driver would fail to enable clocks during restore() (i.e. all ports would have to be closed by drivers and user space before hibernating the system to avoid this as a comment in the code hinted at). The broken implementation also added a random call to enable the receiver in the port setup code where it does not belong and which enables the receiver prematurely for console ports. Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") Cc: stable(a)vger.kernel.org # 6.2 Cc: Aniket Randive <quic_arandive(a)quicinc.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/tty/serial/qcom_geni_serial.c | 41 ++------------------------- 1 file changed, 2 insertions(+), 39 deletions(-) diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index c237c9d107cd..2e4a5361f137 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1170,7 +1170,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode); - qcom_geni_serial_start_rx(uport); port->setup = true; return 0; @@ -1799,38 +1798,6 @@ static int qcom_geni_serial_sys_resume(struct device *dev) return ret; } -static int qcom_geni_serial_sys_hib_resume(struct device *dev) -{ - int ret = 0; - struct uart_port *uport; - struct qcom_geni_private_data *private_data; - struct qcom_geni_serial_port *port = dev_get_drvdata(dev); - - uport = &port->uport; - private_data = uport->private_data; - - if (uart_console(uport)) { - geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ALWAYS); - geni_icc_set_bw(&port->se); - ret = uart_resume_port(private_data->drv, uport); - /* - * For hibernation usecase clients for - * console UART won't call port setup during restore, - * hence call port setup for console uart. - */ - qcom_geni_serial_port_setup(uport); - } else { - /* - * Peripheral register settings are lost during hibernation. - * Update setup flag such that port setup happens again - * during next session. Clients of HS-UART will close and - * open the port during hibernation. - */ - port->setup = false; - } - return ret; -} - static const struct qcom_geni_device_data qcom_geni_console_data = { .console = true, .mode = GENI_SE_FIFO, @@ -1842,12 +1809,8 @@ static const struct qcom_geni_device_data qcom_geni_uart_data = { }; static const struct dev_pm_ops qcom_geni_serial_pm_ops = { - .suspend = pm_sleep_ptr(qcom_geni_serial_sys_suspend), - .resume = pm_sleep_ptr(qcom_geni_serial_sys_resume), - .freeze = pm_sleep_ptr(qcom_geni_serial_sys_suspend), - .poweroff = pm_sleep_ptr(qcom_geni_serial_sys_suspend), - .restore = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume), - .thaw = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume), + SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend, + qcom_geni_serial_sys_resume) }; static const struct of_device_id qcom_geni_serial_match_table[] = { -- 2.45.2

7 months, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2024