June 2024 - Linux-stable-mirror

[PATCH 6.6~6.9] cifs: fix pagecache leak when do writepages

by Yang Erkun

After commit f3dc1bdb6b0b("cifs: Fix writeback data corruption"), the writepages for cifs will find all folio needed writepage with two phase. The first folio will be found in cifs_writepages_begin, and the latter various folios will be found in cifs_extend_writeback. All those will first get folio, and for normal case, once we set page writeback and after do really write, we should put the reference, folio found in cifs_extend_writeback do this with folio_batch_release. But the folio found in cifs_writepages_begin never get the chance do it. And every writepages call, we will leak a folio(found this problem while do xfstests over cifs). Besides, the exist path seem never handle this folio correctly, fix it too with this patch. The problem does not exist in mainline since writepages path for cifs has changed to netfs. It's had to backport all related change, so try fix this problem with this single patch. Fixes: f3dc1bdb6b0b ("cifs: Fix writeback data corruption") Signed-off-by: Yang Erkun <yangerkun(a)huawei.com> --- fs/smb/client/file.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c index 9be37d0fe724..0a48d80b3871 100644 --- a/fs/smb/client/file.c +++ b/fs/smb/client/file.c @@ -2860,17 +2860,21 @@ static ssize_t cifs_write_back_from_locked_folio(struct address_space *mapping, rc = cifs_get_writable_file(CIFS_I(inode), FIND_WR_ANY, &cfile); if (rc) { cifs_dbg(VFS, "No writable handle in writepages rc=%d\n", rc); + folio_unlock(folio); goto err_xid; } rc = server->ops->wait_mtu_credits(server, cifs_sb->ctx->wsize, &wsize, credits); - if (rc != 0) + if (rc != 0) { + folio_unlock(folio); goto err_close; + } wdata = cifs_writedata_alloc(cifs_writev_complete); if (!wdata) { rc = -ENOMEM; + folio_unlock(folio); goto err_uncredit; } @@ -3017,17 +3021,22 @@ static ssize_t cifs_writepages_begin(struct address_space *mapping, lock_again: if (wbc->sync_mode != WB_SYNC_NONE) { ret = folio_lock_killable(folio); - if (ret < 0) + if (ret < 0) { + folio_put(folio); return ret; + } } else { - if (!folio_trylock(folio)) + if (!folio_trylock(folio)) { + folio_put(folio); goto search_again; + } } if (folio->mapping != mapping || !folio_test_dirty(folio)) { start += folio_size(folio); folio_unlock(folio); + folio_put(folio); goto search_again; } @@ -3057,6 +3066,7 @@ static ssize_t cifs_writepages_begin(struct address_space *mapping, out: if (ret > 0) *_start = start + ret; + folio_put(folio); return ret; } -- 2.39.2

3 months, 4 weeks

3
2
0 0

+ mm-gup-clear-the-lru-flag-of-a-page-before-adding-to-lru-batch.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/gup: clear the LRU flag of a page before adding to LRU batch has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-gup-clear-the-lru-flag-of-a-page-before-adding-to-lru-batch.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: yangge <yangge1116(a)126.com> Subject: mm/gup: clear the LRU flag of a page before adding to LRU batch Date: Sat, 22 Jun 2024 14:48:04 +0800 If a large number of CMA memory are configured in system (for example, the CMA memory accounts for 50% of the system memory), starting a virtual machine, it will call pin_user_pages_remote(..., FOLL_LONGTERM, ...) to pin memory. Normally if a page is present and in CMA area, pin_user_pages_remote() will migrate the page from CMA area to non-CMA area because of FOLL_LONGTERM flag. But the current code will cause the migration failure due to unexpected page refcounts, and eventually cause the virtual machine fail to start. If a page is added in LRU batch, its refcount increases one, remove the page from LRU batch decreases one. Page migration requires the page is not referenced by others except page mapping. Before migrating a page, we should try to drain the page from LRU batch in case the page is in it, however, folio_test_lru() is not sufficient to tell whether the page is in LRU batch or not, if the page is in LRU batch, the migration will fail. To solve the problem above, we modify the logic of adding to LRU batch. Before adding a page to LRU batch, we clear the LRU flag of the page so that we can check whether the page is in LRU batch by folio_test_lru(page). Seems making the LRU flag of the page invisible a long time is no problem, because a new page is allocated from buddy and added to the lru batch, its LRU flag is also not visible for a long time. Link: https://lkml.kernel.org/r/1719038884-1903-1-git-send-email-yangge1116@126.c… Signed-off-by: yangge <yangge1116(a)126.com> Cc: Baolin Wang <baolin.wang(a)linux.alibaba.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: Alex Shi <alex.shi(a)linux.alibaba.com> Cc: Shaohua Li <shli(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/swap.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) --- a/mm/swap.c~mm-gup-clear-the-lru-flag-of-a-page-before-adding-to-lru-batch +++ a/mm/swap.c @@ -212,10 +212,6 @@ static void folio_batch_move_lru(struct for (i = 0; i < folio_batch_count(fbatch); i++) { struct folio *folio = fbatch->folios[i]; - /* block memcg migration while the folio moves between lru */ - if (move_fn != lru_add_fn && !folio_test_clear_lru(folio)) - continue; - folio_lruvec_relock_irqsave(folio, &lruvec, &flags); move_fn(lruvec, folio); @@ -256,11 +252,16 @@ static void lru_move_tail_fn(struct lruv void folio_rotate_reclaimable(struct folio *folio) { if (!folio_test_locked(folio) && !folio_test_dirty(folio) && - !folio_test_unevictable(folio) && folio_test_lru(folio)) { + !folio_test_unevictable(folio)) { struct folio_batch *fbatch; unsigned long flags; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock_irqsave(&lru_rotate.lock, flags); fbatch = this_cpu_ptr(&lru_rotate.fbatch); folio_batch_add_and_move(fbatch, folio, lru_move_tail_fn); @@ -353,11 +354,15 @@ static void folio_activate_drain(int cpu void folio_activate(struct folio *folio) { - if (folio_test_lru(folio) && !folio_test_active(folio) && - !folio_test_unevictable(folio)) { + if (!folio_test_active(folio) && !folio_test_unevictable(folio)) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.activate); folio_batch_add_and_move(fbatch, folio, folio_activate_fn); @@ -701,6 +706,11 @@ void deactivate_file_folio(struct folio return; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate_file); folio_batch_add_and_move(fbatch, folio, lru_deactivate_file_fn); @@ -717,11 +727,16 @@ void deactivate_file_folio(struct folio */ void folio_deactivate(struct folio *folio) { - if (folio_test_lru(folio) && !folio_test_unevictable(folio) && - (folio_test_active(folio) || lru_gen_enabled())) { + if (!folio_test_unevictable(folio) && (folio_test_active(folio) || + lru_gen_enabled())) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate); folio_batch_add_and_move(fbatch, folio, lru_deactivate_fn); @@ -738,12 +753,16 @@ void folio_deactivate(struct folio *foli */ void folio_mark_lazyfree(struct folio *folio) { - if (folio_test_lru(folio) && folio_test_anon(folio) && - folio_test_swapbacked(folio) && !folio_test_swapcache(folio) && - !folio_test_unevictable(folio)) { + if (folio_test_anon(folio) && folio_test_swapbacked(folio) && + !folio_test_swapcache(folio) && !folio_test_unevictable(folio)) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_lazyfree); folio_batch_add_and_move(fbatch, folio, lru_lazyfree_fn); _ Patches currently in -mm which might be from yangge1116(a)126.com are mm-page_alloc-separate-thp-pcp-into-movable-and-non-movable-categories.patch mm-gup-clear-the-lru-flag-of-a-page-before-adding-to-lru-batch.patch

3 months, 4 weeks

1
0
0 0

+ nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: nilfs2: fix incorrect inode allocation from reserved inodes has been added to the -mm mm-hotfixes-unstable branch. Its filename is nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Subject: nilfs2: fix incorrect inode allocation from reserved inodes Date: Sun, 23 Jun 2024 14:11:35 +0900 If the bitmap block that manages the inode allocation status is corrupted, nilfs_ifile_create_inode() may allocate a new inode from the reserved inode area where it should not be allocated. Previous fix commit d325dc6eb763 ("nilfs2: fix use-after-free bug of struct nilfs_root"), fixed the problem that reserved inodes with inode numbers less than NILFS_USER_INO (=11) were incorrectly reallocated due to bitmap corruption, but since the start number of non-reserved inodes is read from the super block and may change, in which case inode allocation may occur from the extended reserved inode area. If that happens, access to that inode will cause an IO error, causing the file system to degrade to an error state. Fix this potential issue by adding a wraparound option to the common metadata object allocation routine and by modifying nilfs_ifile_create_inode() to disable the option so that it only allocates inodes with inode numbers greater than or equal to the inode number read in "nilfs->ns_first_ino", regardless of the bitmap status of reserved inodes. Link: https://lkml.kernel.org/r/20240623051135.4180-4-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Cc: Hillf Danton <hdanton(a)sina.com> Cc: Jan Kara <jack(a)suse.cz> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/nilfs2/alloc.c | 19 +++++++++++++++---- fs/nilfs2/alloc.h | 4 ++-- fs/nilfs2/dat.c | 2 +- fs/nilfs2/ifile.c | 7 ++----- 4 files changed, 20 insertions(+), 12 deletions(-) --- a/fs/nilfs2/alloc.c~nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes +++ a/fs/nilfs2/alloc.c @@ -377,11 +377,12 @@ void *nilfs_palloc_block_get_entry(const * @target: offset number of an entry in the group (start point) * @bsize: size in bits * @lock: spin lock protecting @bitmap + * @wrap: whether to wrap around */ static int nilfs_palloc_find_available_slot(unsigned char *bitmap, unsigned long target, unsigned int bsize, - spinlock_t *lock) + spinlock_t *lock, bool wrap) { int pos, end = bsize; @@ -397,6 +398,8 @@ static int nilfs_palloc_find_available_s end = target; } + if (!wrap) + return -ENOSPC; /* wrap around */ for (pos = 0; pos < end; pos++) { @@ -495,9 +498,10 @@ int nilfs_palloc_count_max_entries(struc * nilfs_palloc_prepare_alloc_entry - prepare to allocate a persistent object * @inode: inode of metadata file using this allocator * @req: nilfs_palloc_req structure exchanged for the allocation + * @wrap: whether to wrap around */ int nilfs_palloc_prepare_alloc_entry(struct inode *inode, - struct nilfs_palloc_req *req) + struct nilfs_palloc_req *req, bool wrap) { struct buffer_head *desc_bh, *bitmap_bh; struct nilfs_palloc_group_desc *desc; @@ -516,7 +520,7 @@ int nilfs_palloc_prepare_alloc_entry(str entries_per_group = nilfs_palloc_entries_per_group(inode); for (i = 0; i < ngroups; i += n) { - if (group >= ngroups) { + if (group >= ngroups && wrap) { /* wrap around */ group = 0; maxgroup = nilfs_palloc_group(inode, req->pr_entry_nr, @@ -550,7 +554,14 @@ int nilfs_palloc_prepare_alloc_entry(str bitmap_kaddr = kmap_local_page(bitmap_bh->b_page); bitmap = bitmap_kaddr + bh_offset(bitmap_bh); pos = nilfs_palloc_find_available_slot( - bitmap, group_offset, entries_per_group, lock); + bitmap, group_offset, entries_per_group, lock, + wrap); + /* + * Since the search for a free slot in the second and + * subsequent bitmap blocks always starts from the + * beginning, the wrap flag only has an effect on the + * first search. + */ kunmap_local(bitmap_kaddr); if (pos >= 0) goto found; --- a/fs/nilfs2/alloc.h~nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes +++ a/fs/nilfs2/alloc.h @@ -50,8 +50,8 @@ struct nilfs_palloc_req { struct buffer_head *pr_entry_bh; }; -int nilfs_palloc_prepare_alloc_entry(struct inode *, - struct nilfs_palloc_req *); +int nilfs_palloc_prepare_alloc_entry(struct inode *inode, + struct nilfs_palloc_req *req, bool wrap); void nilfs_palloc_commit_alloc_entry(struct inode *, struct nilfs_palloc_req *); void nilfs_palloc_abort_alloc_entry(struct inode *, struct nilfs_palloc_req *); --- a/fs/nilfs2/dat.c~nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes +++ a/fs/nilfs2/dat.c @@ -75,7 +75,7 @@ int nilfs_dat_prepare_alloc(struct inode { int ret; - ret = nilfs_palloc_prepare_alloc_entry(dat, req); + ret = nilfs_palloc_prepare_alloc_entry(dat, req, true); if (ret < 0) return ret; --- a/fs/nilfs2/ifile.c~nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes +++ a/fs/nilfs2/ifile.c @@ -56,13 +56,10 @@ int nilfs_ifile_create_inode(struct inod struct nilfs_palloc_req req; int ret; - req.pr_entry_nr = 0; /* - * 0 says find free inode from beginning - * of a group. dull code!! - */ + req.pr_entry_nr = NILFS_FIRST_INO(ifile->i_sb); req.pr_entry_bh = NULL; - ret = nilfs_palloc_prepare_alloc_entry(ifile, &req); + ret = nilfs_palloc_prepare_alloc_entry(ifile, &req, false); if (!ret) { ret = nilfs_palloc_get_entry_block(ifile, req.pr_entry_nr, 1, &req.pr_entry_bh); _ Patches currently in -mm which might be from konishi.ryusuke(a)gmail.com are nilfs2-fix-inode-number-range-checks.patch nilfs2-add-missing-check-for-inode-numbers-on-directory-entries.patch nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes.patch nilfs2-prepare-backing-device-folios-for-writing-after-adding-checksums.patch nilfs2-do-not-call-inode_attach_wb-directly.patch

3 months, 4 weeks

1
0
0 0

+ nilfs2-add-missing-check-for-inode-numbers-on-directory-entries.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: nilfs2: add missing check for inode numbers on directory entries has been added to the -mm mm-hotfixes-unstable branch. Its filename is nilfs2-add-missing-check-for-inode-numbers-on-directory-entries.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Subject: nilfs2: add missing check for inode numbers on directory entries Date: Sun, 23 Jun 2024 14:11:34 +0900 Syzbot reported that mounting and unmounting a specific pattern of corrupted nilfs2 filesystem images causes a use-after-free of metadata file inodes, which triggers a kernel bug in lru_add_fn(). As Jan Kara pointed out, this is because the link count of a metadata file gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(), tries to delete that inode (ifile inode in this case). The inconsistency occurs because directories containing the inode numbers of these metadata files that should not be visible in the namespace are read without checking. Fix this issue by treating the inode numbers of these internal files as errors in the sanity check helper when reading directory folios/pages. Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer analysis. Link: https://lkml.kernel.org/r/20240623051135.4180-3-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Reported-by: syzbot+d79afb004be235636ee8(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d79afb004be235636ee8 Reported-by: Jan Kara <jack(a)suse.cz> Closes: https://lkml.kernel.org/r/20240617075758.wewhukbrjod5fp5o@quack3 Tested-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Cc: Hillf Danton <hdanton(a)sina.com> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/nilfs2/dir.c | 6 ++++++ fs/nilfs2/nilfs.h | 5 +++++ 2 files changed, 11 insertions(+) --- a/fs/nilfs2/dir.c~nilfs2-add-missing-check-for-inode-numbers-on-directory-entries +++ a/fs/nilfs2/dir.c @@ -135,6 +135,9 @@ static bool nilfs_check_folio(struct fol goto Enamelen; if (((offs + rec_len - 1) ^ offs) & ~(chunk_size-1)) goto Espan; + if (unlikely(p->inode && + NILFS_PRIVATE_INODE(le64_to_cpu(p->inode)))) + goto Einumber; } if (offs != limit) goto Eend; @@ -160,6 +163,9 @@ Enamelen: goto bad_entry; Espan: error = "directory entry across blocks"; + goto bad_entry; +Einumber: + error = "disallowed inode number"; bad_entry: nilfs_error(sb, "bad entry in directory #%lu: %s - offset=%lu, inode=%lu, rec_len=%zd, name_len=%d", --- a/fs/nilfs2/nilfs.h~nilfs2-add-missing-check-for-inode-numbers-on-directory-entries +++ a/fs/nilfs2/nilfs.h @@ -121,6 +121,11 @@ enum { ((ino) >= NILFS_FIRST_INO(sb) || \ ((ino) < NILFS_USER_INO && (NILFS_SYS_INO_BITS & BIT(ino)))) +#define NILFS_PRIVATE_INODE(ino) ({ \ + ino_t __ino = (ino); \ + ((__ino) < NILFS_USER_INO && (__ino) != NILFS_ROOT_INO && \ + (__ino) != NILFS_SKETCH_INO); }) + /** * struct nilfs_transaction_info: context information for synchronization * @ti_magic: Magic number _ Patches currently in -mm which might be from konishi.ryusuke(a)gmail.com are nilfs2-fix-inode-number-range-checks.patch nilfs2-add-missing-check-for-inode-numbers-on-directory-entries.patch nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes.patch nilfs2-prepare-backing-device-folios-for-writing-after-adding-checksums.patch nilfs2-do-not-call-inode_attach_wb-directly.patch

3 months, 4 weeks

1
0
0 0

+ nilfs2-fix-inode-number-range-checks.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: nilfs2: fix inode number range checks has been added to the -mm mm-hotfixes-unstable branch. Its filename is nilfs2-fix-inode-number-range-checks.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Subject: nilfs2: fix inode number range checks Date: Sun, 23 Jun 2024 14:11:33 +0900 Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inode number, is read from the superblock, but its lower limit is not checked. As a result, if a number that overlaps with the inode number range of reserved inodes such as the root directory or metadata files is set in the super block parameter, the inode number test macros (NILFS_MDT_INODE and NILFS_VALID_INODE) will not function properly. In addition, these test macros use left bit-shift calculations using with the inode number as the shift count via the BIT macro, but the result of a shift calculation that exceeds the bit width of an integer is undefined in the C specification, so if "ns_first_ino" is set to a large value other than the default value NILFS_USER_INO (=11), the macros may potentially malfunction depending on the environment. Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and by preventing bit shifts equal to or greater than the NILFS_USER_INO constant in the inode number test macros. Also, change the type of "ns_first_ino" from signed integer to unsigned integer to avoid the need for type casting in comparisons such as the lower bound check introduced this time. Link: https://lkml.kernel.org/r/20240623051135.4180-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20240623051135.4180-2-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Cc: Hillf Danton <hdanton(a)sina.com> Cc: Jan Kara <jack(a)suse.cz> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- fs/nilfs2/nilfs.h | 5 +++-- fs/nilfs2/the_nilfs.c | 6 ++++++ fs/nilfs2/the_nilfs.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-) --- a/fs/nilfs2/nilfs.h~nilfs2-fix-inode-number-range-checks +++ a/fs/nilfs2/nilfs.h @@ -116,9 +116,10 @@ enum { #define NILFS_FIRST_INO(sb) (((struct the_nilfs *)sb->s_fs_info)->ns_first_ino) #define NILFS_MDT_INODE(sb, ino) \ - ((ino) < NILFS_FIRST_INO(sb) && (NILFS_MDT_INO_BITS & BIT(ino))) + ((ino) < NILFS_USER_INO && (NILFS_MDT_INO_BITS & BIT(ino))) #define NILFS_VALID_INODE(sb, ino) \ - ((ino) >= NILFS_FIRST_INO(sb) || (NILFS_SYS_INO_BITS & BIT(ino))) + ((ino) >= NILFS_FIRST_INO(sb) || \ + ((ino) < NILFS_USER_INO && (NILFS_SYS_INO_BITS & BIT(ino)))) /** * struct nilfs_transaction_info: context information for synchronization --- a/fs/nilfs2/the_nilfs.c~nilfs2-fix-inode-number-range-checks +++ a/fs/nilfs2/the_nilfs.c @@ -452,6 +452,12 @@ static int nilfs_store_disk_layout(struc } nilfs->ns_first_ino = le32_to_cpu(sbp->s_first_ino); + if (nilfs->ns_first_ino < NILFS_USER_INO) { + nilfs_err(nilfs->ns_sb, + "too small lower limit for non-reserved inode numbers: %u", + nilfs->ns_first_ino); + return -EINVAL; + } nilfs->ns_blocks_per_segment = le32_to_cpu(sbp->s_blocks_per_segment); if (nilfs->ns_blocks_per_segment < NILFS_SEG_MIN_BLOCKS) { --- a/fs/nilfs2/the_nilfs.h~nilfs2-fix-inode-number-range-checks +++ a/fs/nilfs2/the_nilfs.h @@ -182,7 +182,7 @@ struct the_nilfs { unsigned long ns_nrsvsegs; unsigned long ns_first_data_block; int ns_inode_size; - int ns_first_ino; + unsigned int ns_first_ino; u32 ns_crc_seed; /* /sys/fs/<nilfs>/<device> */ _ Patches currently in -mm which might be from konishi.ryusuke(a)gmail.com are nilfs2-fix-inode-number-range-checks.patch nilfs2-add-missing-check-for-inode-numbers-on-directory-entries.patch nilfs2-fix-incorrect-inode-allocation-from-reserved-inodes.patch nilfs2-prepare-backing-device-folios-for-writing-after-adding-checksums.patch nilfs2-do-not-call-inode_attach_wb-directly.patch

3 months, 4 weeks

1
0
0 0

[tip: irq/urgent] PCI/MSI: Fix UAF in msi_capability_init

by tip-bot2 for Mostafa Saleh

The following commit has been merged into the irq/urgent branch of tip: Commit-ID: 9eee5330656bf92f51cb1f09b2dc9f8cf975b3d1 Gitweb: https://git.kernel.org/tip/9eee5330656bf92f51cb1f09b2dc9f8cf975b3d1 Author: Mostafa Saleh <smostafa(a)google.com> AuthorDate: Mon, 24 Jun 2024 20:37:28 Committer: Thomas Gleixner <tglx(a)linutronix.de> CommitterDate: Mon, 24 Jun 2024 23:33:38 +02:00 PCI/MSI: Fix UAF in msi_capability_init KFENCE reports the following UAF: BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488 Use-after-free read at 0x0000000024629571 (in kfence-#12): __pci_enable_msi_range+0x2c0/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128 allocated by task 81 on cpu 7 at 10.808142s: __kmem_cache_alloc_node+0x1f0/0x2bc kmalloc_trace+0x44/0x138 msi_alloc_desc+0x3c/0x9c msi_domain_insert_msi_desc+0x30/0x78 msi_setup_msi_desc+0x13c/0x184 __pci_enable_msi_range+0x258/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 freed by task 81 on cpu 7 at 10.811436s: msi_domain_free_descs+0xd4/0x10c msi_domain_free_locked.part.0+0xc0/0x1d8 msi_domain_alloc_irqs_all_locked+0xb4/0xbc pci_msi_setup_msi_irqs+0x30/0x4c __pci_enable_msi_range+0x2a8/0x488 pci_alloc_irq_vectors_affinity+0xec/0x14c pci_alloc_irq_vectors+0x18/0x28 Descriptor allocation done in: __pci_enable_msi_range msi_capability_init msi_setup_msi_desc msi_insert_msi_desc msi_domain_insert_msi_desc msi_alloc_desc ... Freed in case of failure in __msi_domain_alloc_locked() __pci_enable_msi_range msi_capability_init pci_msi_setup_msi_irqs msi_domain_alloc_irqs_all_locked msi_domain_alloc_locked __msi_domain_alloc_locked => fails msi_domain_free_locked ... That failure propagates back to pci_msi_setup_msi_irqs() in msi_capability_init() which accesses the descriptor for unmasking in the error exit path. Cure it by copying the descriptor and using the copy for the error exit path unmask operation. [ tglx: Massaged change log ] Fixes: bf6e054e0e3f ("genirq/msi: Provide msi_device_populate/destroy_sysfs()") Suggested-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Mostafa Saleh <smostafa(a)google.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Bjorn Heelgas <bhelgaas(a)google.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20240624203729.1094506-1-smostafa@google.com --- drivers/pci/msi/msi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/pci/msi/msi.c b/drivers/pci/msi/msi.c index c5625dd..3a45879 100644 --- a/drivers/pci/msi/msi.c +++ b/drivers/pci/msi/msi.c @@ -352,7 +352,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec, struct irq_affinity *affd) { struct irq_affinity_desc *masks = NULL; - struct msi_desc *entry; + struct msi_desc *entry, desc; int ret; /* Reject multi-MSI early on irq domain enabled architectures */ @@ -377,6 +377,12 @@ static int msi_capability_init(struct pci_dev *dev, int nvec, /* All MSIs are unmasked by default; mask them all */ entry = msi_first_desc(&dev->dev, MSI_DESC_ALL); pci_msi_mask(entry, msi_multi_mask(entry)); + /* + * Copy the MSI descriptor for the error path because + * pci_msi_setup_msi_irqs() will free it for the hierarchical + * interrupt domain case. + */ + memcpy(&desc, entry, sizeof(desc)); /* Configure MSI capability structure */ ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); @@ -396,7 +402,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec, goto unlock; err: - pci_msi_unmask(entry, msi_multi_mask(entry)); + pci_msi_unmask(&desc, msi_multi_mask(&desc)); pci_free_msi_irqs(dev); fail: dev->msi_enabled = 0;

3 months, 4 weeks

1
0
0 0

+ mm-damon-core-merge-regions-aggressively-when-max_nr_regions-is-unmet.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/damon/core: merge regions aggressively when max_nr_regions is unmet has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-damon-core-merge-regions-aggressively-when-max_nr_regions-is-unmet.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: SeongJae Park <sj(a)kernel.org> Subject: mm/damon/core: merge regions aggressively when max_nr_regions is unmet Date: Mon, 24 Jun 2024 10:58:14 -0700 DAMON keeps the number of regions under max_nr_regions by skipping regions split operations when doing so can make the number higher than the limit. It works well for preventing violation of the limit. But, if somehow the violation happens, it cannot recovery well depending on the situation. In detail, if the real number of regions having different access pattern is higher than the limit, the mechanism cannot reduce the number below the limit. In such a case, the system could suffer from high monitoring overhead of DAMON. The violation can actually happen. For an example, the user could reduce max_nr_regions while DAMON is running, to be lower than the current number of regions. Fix the problem by repeating the merge operations with increasing aggressiveness in kdamond_merge_regions() for the case, until the limit is met. Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org Fixes: b9a6ac4e4ede ("mm/damon: adaptively adjust regions") Signed-off-by: SeongJae Park <sj(a)kernel.org> Cc: <stable(a)vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/damon/core.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) --- a/mm/damon/core.c~mm-damon-core-merge-regions-aggressively-when-max_nr_regions-is-unmet +++ a/mm/damon/core.c @@ -1358,14 +1358,30 @@ static void damon_merge_regions_of(struc * access frequencies are similar. This is for minimizing the monitoring * overhead under the dynamically changeable access pattern. If a merge was * unnecessarily made, later 'kdamond_split_regions()' will revert it. + * + * The total number of regions could be temporarily higher than the + * user-defined limit, max_nr_regions for some cases. For an example, the user + * updates max_nr_regions to a number that lower than the current number of + * regions while DAMON is running. Depending on the access pattern, it could + * take indefinitve time to reduce the number below the limit. For such a + * case, repeat merging until the limit is met while increasing @threshold and + * @sz_limit. */ static void kdamond_merge_regions(struct damon_ctx *c, unsigned int threshold, unsigned long sz_limit) { struct damon_target *t; + unsigned int nr_regions; - damon_for_each_target(t, c) - damon_merge_regions_of(t, threshold, sz_limit); + do { + nr_regions = 0; + damon_for_each_target(t, c) { + damon_merge_regions_of(t, threshold, sz_limit); + nr_regions += damon_nr_regions(t); + } + threshold = max(1, threshold * 2); + sz_limit = max(1, sz_limit * 2); + } while (nr_regions > c->attrs.max_nr_regions); } /* _ Patches currently in -mm which might be from sj(a)kernel.org are mm-damon-core-merge-regions-aggressively-when-max_nr_regions-is-unmet.patch mm-damon-sysfs-schemes-add-target_nid-on-sysfs-schemes-fix.patch docs-damon-document-damos_migrate_hotcold-fix.patch mm-damon-core-implement-damos-quota-goals-online-commit-function.patch mm-damon-core-implement-damon-context-commit-function.patch mm-damon-sysfs-use-damon_commit_ctx.patch mm-damon-sysfs-schemes-use-damos_commit_quota_goals.patch mm-damon-sysfs-remove-unnecessary-online-tuning-handling-code.patch mm-damon-sysfs-rename-damon_sysfs_set_targets-to-add_targets.patch mm-damon-sysfs-schemes-remove-unnecessary-online-tuning-handling-code.patch mm-damon-sysfs-schemes-rename-_set_schemesscheme_filtersquota_scoreschemes.patch mm-damon-reclaim-use-damon_commit_ctx.patch mm-damon-reclaim-remove-unnecessary-code-for-online-tuning.patch mm-damon-lru_sort-use-damon_commit_ctx.patch mm-damon-lru_sort-remove-unnecessary-online-tuning-handling-code.patch docs-mm-damon-maintainer-profile-introduce-hackermail.patch docs-mm-damon-maintainer-profile-document-damon-community-meetups.patch

3 months, 4 weeks

1
0
0 0

[PATCH v4 2/2] drm/rockchip: vop: enable VOP_FEATURE_INTERNAL_RGB on RK3066

by Val Packett

The RK3066 does have RGB display output, so it should be marked as such. Fixes: f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable(a)vger.kernel.org Signed-off-by: Val Packett <val(a)packett.cool> --- drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c index 9bcb40a64..e2c6ba26f 100644 --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c @@ -515,6 +515,7 @@ static const struct vop_data rk3066_vop = { .output = &rk3066_output, .win = rk3066_vop_win_data, .win_size = ARRAY_SIZE(rk3066_vop_win_data), + .feature = VOP_FEATURE_INTERNAL_RGB, .max_output = { 1920, 1080 }, }; -- 2.45.2

3 months, 4 weeks

1
0
0 0

[PATCH v4 1/2] drm/rockchip: vop: clear DMA stop bit on RK3066

by Val Packett

The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame and needs the driver to acknowledge that by clearing the bit. Unless we clear it "between" frames, the RGB output only shows noise instead of the picture. atomic_flush is the place for it that least affects other code (doing it on vblank would require converting all other usages of the reg_lock to spin_(un)lock_irq, which would affect performance for everyone). This seems to be a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block. Fixes: f4a6de8 ("drm: rockchip: vop: add rk3066 vop definitions") Cc: stable(a)vger.kernel.org Signed-off-by: Val Packett <val(a)packett.cool> --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 4 ++++ drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 1 + drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 + 3 files changed, 6 insertions(+) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index a13473b2d..e88fbd568 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1583,6 +1583,10 @@ static void vop_crtc_atomic_flush(struct drm_crtc *crtc, VOP_AFBC_SET(vop, enable, s->enable_afbc); vop_cfg_done(vop); + /* Ack the DMA transfer of the previous frame (RK3066). */ + if (VOP_HAS_REG(vop, common, dma_stop)) + VOP_REG_SET(vop, common, dma_stop, 0); + spin_unlock(&vop->reg_lock); /* diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h index b33e5bdc2..0cf512cc1 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h @@ -122,6 +122,7 @@ struct vop_common { struct vop_reg lut_buffer_index; struct vop_reg gate_en; struct vop_reg mmu_en; + struct vop_reg dma_stop; struct vop_reg out_mode; struct vop_reg standby; }; diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c index b9ee02061..9bcb40a64 100644 --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c @@ -466,6 +466,7 @@ static const struct vop_output rk3066_output = { }; static const struct vop_common rk3066_common = { + .dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0), .standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1), .out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0), .cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0), -- 2.45.2

3 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] drm/i915/gt: Disarm breadcrumbs if engines are already idle" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 70cb9188ffc75e643debf292fcddff36c9dbd4ae # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061929-scalding-tweak-f522@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 70cb9188ffc7 ("drm/i915/gt: Disarm breadcrumbs if engines are already idle") c877bed82e10 ("drm/i915/gt: Only kick the signal worker if there's been an update") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 70cb9188ffc75e643debf292fcddff36c9dbd4ae Mon Sep 17 00:00:00 2001 From: Chris Wilson <chris(a)chris-wilson.co.uk> Date: Tue, 23 Apr 2024 18:23:10 +0200 Subject: [PATCH] drm/i915/gt: Disarm breadcrumbs if engines are already idle The breadcrumbs use a GT wakeref for guarding the interrupt, but are disarmed during release of the engine wakeref. This leaves a hole where we may attach a breadcrumb just as the engine is parking (after it has parked its breadcrumbs), execute the irq worker with some signalers still attached, but never be woken again. That issue manifests itself in CI with IGT runner timeouts while tests are waiting indefinitely for release of all GT wakerefs. <6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats <7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5 <7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT. ... <6> [299.356526] sysrq: Show State ... <6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002 <6> [299.373967] Call Trace: <6> [299.373968] <TASK> <6> [299.373970] __schedule+0x3bb/0xda0 <6> [299.373974] schedule+0x41/0x110 <6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915] <6> [299.374083] ? __pfx_var_wake_function+0x10/0x10 <6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915] <6> [299.374173] __i915_subtests+0xbe/0x240 [i915] <6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915] <6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915] <6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915] <6> [299.374547] __run_selftests+0xbb/0x190 [i915] <6> [299.374635] i915_live_selftests+0x4b/0x90 [i915] <6> [299.374717] i915_pci_probe+0x10d/0x210 [i915] At the end of the interrupt worker, if there are no more engines awake, disarm the breadcrumb and go to sleep. Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026 Signed-off-by: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Andrzej Hajda <andrzej.hajda(a)intel.com> Cc: <stable(a)vger.kernel.org> # v5.12+ Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik(a)linux.intel.com> Acked-by: Nirmoy Das <nirmoy.das(a)intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda(a)intel.com> Reviewed-by: Andi Shyti <andi.shyti(a)linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janus… (cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5) Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> diff --git a/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c b/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c index d650beb8ed22..20b9b04ec1e0 100644 --- a/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c +++ b/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c @@ -263,8 +263,13 @@ static void signal_irq_work(struct irq_work *work) i915_request_put(rq); } + /* Lazy irq enabling after HW submission */ if (!READ_ONCE(b->irq_armed) && !list_empty(&b->signalers)) intel_breadcrumbs_arm_irq(b); + + /* And confirm that we still want irqs enabled before we yield */ + if (READ_ONCE(b->irq_armed) && !atomic_read(&b->active)) + intel_breadcrumbs_disarm_irq(b); } struct intel_breadcrumbs * @@ -315,13 +320,7 @@ void __intel_breadcrumbs_park(struct intel_breadcrumbs *b) return; /* Kick the work once more to drain the signalers, and disarm the irq */ - irq_work_sync(&b->irq_work); - while (READ_ONCE(b->irq_armed) && !atomic_read(&b->active)) { - local_irq_disable(); - signal_irq_work(&b->irq_work); - local_irq_enable(); - cond_resched(); - } + irq_work_queue(&b->irq_work); } void intel_breadcrumbs_free(struct kref *kref) @@ -404,7 +403,7 @@ static void insert_breadcrumb(struct i915_request *rq) * the request as it may have completed and raised the interrupt as * we were attaching it into the lists. */ - if (!b->irq_armed || __i915_request_is_complete(rq)) + if (!READ_ONCE(b->irq_armed) || __i915_request_is_complete(rq)) irq_work_queue(&b->irq_work); }

3 months, 4 weeks

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2024