February 2025 - Linux-stable-mirror

[PATCH] Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"

by Christian Heusel

This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772. This commit was found responsible for issues with SD card recognition, as users had to re-insert their cards in the readers and wait for a while. As for some people the SD card was involved in the boot process it also caused boot failures. Cc: stable(a)vger.kernel.org Link: https://bbs.archlinux.org/viewtopic.php?id=303321 Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection") Reported-by: qf <quintafeira(a)tutanota.com> Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu Signed-off-by: Christian Heusel <christian(a)heusel.eu> --- drivers/misc/cardreader/rtsx_usb.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c index e0174da5e9fc39ae96b70ce70d57a87dfaa2ebdb..77b0490a1b38d79134d48020bd49a9fa6f0df967 100644 --- a/drivers/misc/cardreader/rtsx_usb.c +++ b/drivers/misc/cardreader/rtsx_usb.c @@ -286,7 +286,6 @@ static int rtsx_usb_get_status_with_bulk(struct rtsx_ucr *ucr, u16 *status) int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status) { int ret; - u8 interrupt_val = 0; u16 *buf; if (!status) @@ -309,20 +308,6 @@ int rtsx_usb_get_card_status(struct rtsx_ucr *ucr, u16 *status) ret = rtsx_usb_get_status_with_bulk(ucr, status); } - rtsx_usb_read_register(ucr, CARD_INT_PEND, &interrupt_val); - /* Cross check presence with interrupts */ - if (*status & XD_CD) - if (!(interrupt_val & XD_INT)) - *status &= ~XD_CD; - - if (*status & SD_CD) - if (!(interrupt_val & SD_INT)) - *status &= ~SD_CD; - - if (*status & MS_CD) - if (!(interrupt_val & MS_INT)) - *status &= ~MS_CD; - /* usb_control_msg may return positive when success */ if (ret < 0) return ret; --- base-commit: d082ecbc71e9e0bf49883ee4afd435a77a5101b6 change-id: 20250224-revert-sdcard-patch-f7a7453d4d8a Best regards, -- Christian Heusel <christian(a)heusel.eu>

10 months

2
2
0 0

[PATCH] pinctrl: nomadik: Add error handling for find_nmk_gpio_from_pin

by Wentao Liang

When find_nmk_gpio_from_pin fails to find a valid GPIO chip for the given pin, the bit variable remains uninitialized. This uninitialized value is then passed to __nmk_gpio_set_mode, leading to undefined behavior and undesired address access. To fix this, add error handling to check the return value of find_nmk_gpio_from_pin. Log an error message indicating an invalid pin offset and return -EINVAL immediately If the function fails. Fixes: 75d270fda64d ("gpio: nomadik: request dynamic ID allocation") Cc: stable(a)vger.kernel.org # 6.9+ Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/pinctrl/nomadik/pinctrl-nomadik.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c index f4f10c60c1d2..4155137b0674 100644 --- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c +++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c @@ -985,7 +985,7 @@ static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev, unsigned int pin) { struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); - struct nmk_gpio_chip *nmk_chip; + struct nmk_gpio_chip *nmk_chip, *r; struct gpio_chip *chip; unsigned int bit; @@ -1002,7 +1002,12 @@ static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev, dev_dbg(npct->dev, "enable pin %u as GPIO\n", pin); - find_nmk_gpio_from_pin(pin, &bit); + r = find_nmk_gpio_from_pin(pin, &bit); + if (!r) { + dev_err(npct->dev, + "invalid pin offset %d\n", pin); + return -EINVAL; + } clk_enable(nmk_chip->clk); /* There is no glitch when converting any pin to GPIO */ -- 2.42.0.windows.2

10 months

3
2
0 0

[tip: sched/urgent] sched/core: Prevent rescheduling when interrupts are disabled

by tip-bot2 for Thomas Gleixner

The following commit has been merged into the sched/urgent branch of tip: Commit-ID: 82c387ef7568c0d96a918a5a78d9cad6256cfa15 Gitweb: https://git.kernel.org/tip/82c387ef7568c0d96a918a5a78d9cad6256cfa15 Author: Thomas Gleixner <tglx(a)linutronix.de> AuthorDate: Mon, 16 Dec 2024 14:20:56 +01:00 Committer: Ingo Molnar <mingo(a)kernel.org> CommitterDate: Thu, 27 Feb 2025 21:13:57 +01:00 sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched(). Reported-by: David Woodhouse <dwmw(a)amazon.co.uk> Suggested-by: Peter Zijlstra <peterz(a)infradead.org> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Tested-by: David Woodhouse <dwmw(a)amazon.co.uk> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: stable(a)vger.kernel.org Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@… --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 9aecd91..6718990 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7285,7 +7285,7 @@ out_unlock: #if !defined(CONFIG_PREEMPTION) || defined(CONFIG_PREEMPT_DYNAMIC) int __sched __cond_resched(void) { - if (should_resched(0)) { + if (should_resched(0) && !irqs_disabled()) { preempt_schedule_common(); return 1; }

10 months

1
0
0 0

[tip: sched/urgent] sched/core: Prevent rescheduling when interrupts are disabled

by tip-bot2 for Thomas Gleixner

The following commit has been merged into the sched/urgent branch of tip: Commit-ID: c092dc7d88c1214e109591790c9021a0f734677a Gitweb: https://git.kernel.org/tip/c092dc7d88c1214e109591790c9021a0f734677a Author: Thomas Gleixner <tglx(a)linutronix.de> AuthorDate: Mon, 16 Dec 2024 14:20:56 +01:00 Committer: Ingo Molnar <mingo(a)kernel.org> CommitterDate: Thu, 27 Feb 2025 20:55:16 +01:00 sched/core: Prevent rescheduling when interrupts are disabled David reported a warning observed while loop testing kexec jump: Interrupts enabled after irqrouter_resume+0x0/0x50 WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220 kernel_kexec+0xf6/0x180 __do_sys_reboot+0x206/0x250 do_syscall_64+0x95/0x180 The corresponding interrupt flag trace: hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90 hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90 That means __up_console_sem() was invoked with interrupts enabled. Further instrumentation revealed that in the interrupt disabled section of kexec jump one of the syscore_suspend() callbacks woke up a task, which set the NEED_RESCHED flag. A later callback in the resume path invoked cond_resched() which in turn led to the invocation of the scheduler: __cond_resched+0x21/0x60 down_timeout+0x18/0x60 acpi_os_wait_semaphore+0x4c/0x80 acpi_ut_acquire_mutex+0x3d/0x100 acpi_ns_get_node+0x27/0x60 acpi_ns_evaluate+0x1cb/0x2d0 acpi_rs_set_srs_method_data+0x156/0x190 acpi_pci_link_set+0x11c/0x290 irqrouter_resume+0x54/0x60 syscore_resume+0x6a/0x200 kernel_kexec+0x145/0x1c0 __do_sys_reboot+0xeb/0x240 do_syscall_64+0x95/0x180 This is a long standing problem, which probably got more visible with the recent printk changes. Something does a task wakeup and the scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and invokes schedule() from a completely bogus context. The scheduler enables interrupts after context switching, which causes the above warning at the end. Quite some of the code paths in syscore_suspend()/resume() can result in triggering a wakeup with the exactly same consequences. They might not have done so yet, but as they share a lot of code with normal operations it's just a question of time. The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling models. Full preemption is not affected as cond_resched() is disabled and the preemption check preemptible() takes the interrupt disabled flag into account. Cure the problem by adding a corresponding check into cond_resched(). Reported-by: David Woodhouse <dwmw(a)amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Tested-by: David Woodhouse <dwmw(a)amazon.co.uk> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: stable(a)vger.kernel.org Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@… --- kernel/sched/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 9aecd91..6718990 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -7285,7 +7285,7 @@ out_unlock: #if !defined(CONFIG_PREEMPTION) || defined(CONFIG_PREEMPT_DYNAMIC) int __sched __cond_resched(void) { - if (should_resched(0)) { + if (should_resched(0) && !irqs_disabled()) { preempt_schedule_common(); return 1; }

10 months

1
0
0 0

[PATCH v6 2/3] x86/tdx: Fix arch_safe_halt() execution for TDX VMs

by Vishal Annapurve

Direct HLT instruction execution causes #VEs for TDX VMs which is routed to hypervisor via TDCALL. If HLT is executed in STI-shadow, resulting #VE handler will enable interrupts before TDCALL is routed to hypervisor leading to missed wakeup events. Current TDX spec doesn't expose interruptibility state information to allow #VE handler to selectively enable interrupts. To bypass this issue, TDX VMs need to replace "sti;hlt" execution with direct TDCALL followed by explicit interrupt flag update. Commit bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests") prevented the idle routines from executing HLT instruction in STI-shadow. But it missed the paravirt routine which can be reached like this as an example: acpi_safe_halt() => raw_safe_halt() => arch_safe_halt() => irq.safe_halt() => pv_native_safe_halt() To reliably handle arch_safe_halt() for TDX VMs, introduce explicit dependency on CONFIG_PARAVIRT and override paravirt halt()/safe_halt() routines with TDX-safe versions that execute direct TDCALL and needed interrupt flag updates. Executing direct TDCALL brings in additional benefit of avoiding HLT related #VEs altogether. Cc: stable(a)vger.kernel.org Fixes: bfe6ed0c6727 ("x86/tdx: Add HLT support for TDX guests") Signed-off-by: Vishal Annapurve <vannapurve(a)google.com> --- arch/x86/Kconfig | 1 + arch/x86/coco/tdx/tdx.c | 26 +++++++++++++++++++++++++- arch/x86/include/asm/tdx.h | 2 +- arch/x86/kernel/process.c | 2 +- 4 files changed, 28 insertions(+), 3 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index be2c311f5118..933c046e8966 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -902,6 +902,7 @@ config INTEL_TDX_GUEST depends on X86_64 && CPU_SUP_INTEL depends on X86_X2APIC depends on EFI_STUB + depends on PARAVIRT select ARCH_HAS_CC_PLATFORM select X86_MEM_ENCRYPT select X86_MCE diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c index 32809a06dab4..6aad910d119d 100644 --- a/arch/x86/coco/tdx/tdx.c +++ b/arch/x86/coco/tdx/tdx.c @@ -14,6 +14,7 @@ #include <asm/ia32.h> #include <asm/insn.h> #include <asm/insn-eval.h> +#include <asm/paravirt_types.h> #include <asm/pgtable.h> #include <asm/set_memory.h> #include <asm/traps.h> @@ -398,7 +399,7 @@ static int handle_halt(struct ve_info *ve) return ve_instr_len(ve); } -void __cpuidle tdx_safe_halt(void) +void __cpuidle tdx_halt(void) { const bool irq_disabled = false; @@ -409,6 +410,16 @@ void __cpuidle tdx_safe_halt(void) WARN_ONCE(1, "HLT instruction emulation failed\n"); } +static void __cpuidle tdx_safe_halt(void) +{ + tdx_halt(); + /* + * "__cpuidle" section doesn't support instrumentation, so stick + * with raw_* variant that avoids tracing hooks. + */ + raw_local_irq_enable(); +} + static int read_msr(struct pt_regs *regs, struct ve_info *ve) { struct tdx_module_args args = { @@ -1109,6 +1120,19 @@ void __init tdx_early_init(void) x86_platform.guest.enc_kexec_begin = tdx_kexec_begin; x86_platform.guest.enc_kexec_finish = tdx_kexec_finish; + /* + * Avoid "sti;hlt" execution in TDX guests as HLT induces a #VE that + * will enable interrupts before HLT TDCALL invocation if executed + * in STI-shadow, possibly resulting in missed wakeup events. + * + * Modify all possible HLT execution paths to use TDX specific routines + * that directly execute TDCALL and toggle the interrupt state as + * needed after TDCALL completion. This also reduces HLT related #VEs + * in addition to having a reliable halt logic execution. + */ + pv_ops.irq.safe_halt = tdx_safe_halt; + pv_ops.irq.halt = tdx_halt; + /* * TDX intercepts the RDMSR to read the X2APIC ID in the parallel * bringup low level code. That raises #VE which cannot be handled diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h index b4b16dafd55e..393ee2dfaab1 100644 --- a/arch/x86/include/asm/tdx.h +++ b/arch/x86/include/asm/tdx.h @@ -58,7 +58,7 @@ void tdx_get_ve_info(struct ve_info *ve); bool tdx_handle_virt_exception(struct pt_regs *regs, struct ve_info *ve); -void tdx_safe_halt(void); +void tdx_halt(void); bool tdx_early_handle_ve(struct pt_regs *regs); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 6da6769d7254..d11956a178df 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -934,7 +934,7 @@ void __init select_idle_routine(void) static_call_update(x86_idle, mwait_idle); } else if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) { pr_info("using TDX aware idle routine\n"); - static_call_update(x86_idle, tdx_safe_halt); + static_call_update(x86_idle, tdx_halt); } else { static_call_update(x86_idle, default_idle); } -- 2.48.1.658.g4767266eb4-goog

10 months

2
2
0 0

[PATCH] LoongArch: Use polling play_dead() when resuming from hibernation

by Huacai Chen

When CONFIG_RANDOM_KMALLOC_CACHES or other randomization infrastructrue enabled, the idle_task's stack may different between the booting kernel and target kernel. So when resuming from hibernation, an ACTION_BOOT_CPU IPI wakeup the idle instruction in arch_cpu_idle_dead() and jump to the interrupt handler. But since the stack pointer is changed, the interrupt handler cannot restore correct context. So rename the current arch_cpu_idle_dead() to idle_play_dead(), make it as the default version of play_dead(), and the new arch_cpu_idle_dead() call play_dead() directly. For hibernation, implement an arch-specific hibernate_resume_nonboot_cpu_disable() to use the polling version (idle instruction is replace by nop, and irq is disabled) of play_dead(), i.e. poll_play_dead(), to avoid IPI handler corrupting the idle_task's stack when resuming from hibernation. This solution is a little similar to commit 406f992e4a372dafbe3c ("x86 / hibernate: Use hlt_play_dead() when resuming from hibernation"). Cc: stable(a)vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> --- arch/loongarch/kernel/smp.c | 40 ++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c index fbf747447f13..308478f29278 100644 --- a/arch/loongarch/kernel/smp.c +++ b/arch/loongarch/kernel/smp.c @@ -19,6 +19,7 @@ #include <linux/smp.h> #include <linux/threads.h> #include <linux/export.h> +#include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/time.h> #include <linux/tracepoint.h> @@ -423,7 +424,7 @@ void loongson_cpu_die(unsigned int cpu) mb(); } -void __noreturn arch_cpu_idle_dead(void) +static void __noreturn idle_play_dead(void) { register uint64_t addr; register void (*init_fn)(void); @@ -447,6 +448,43 @@ void __noreturn arch_cpu_idle_dead(void) BUG(); } +static void __noreturn poll_play_dead(void) +{ + register uint64_t addr; + register void (*init_fn)(void); + + idle_task_exit(); + __this_cpu_write(cpu_state, CPU_DEAD); + + __smp_mb(); + do { + __asm__ __volatile__("nop\n\t"); + addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0); + } while (addr == 0); + + init_fn = (void *)TO_CACHE(addr); + iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR); + + init_fn(); + BUG(); +} + +static void (*play_dead)(void) = idle_play_dead; + +void __noreturn arch_cpu_idle_dead(void) +{ + play_dead(); + BUG(); /* play_dead() doesn't return */ +} + +#ifdef CONFIG_HIBERNATION +int hibernate_resume_nonboot_cpu_disable(void) +{ + play_dead = poll_play_dead; + return suspend_disable_secondary_cpus(); +} +#endif + #endif /* -- 2.47.1

10 months

2
1
0 0

[PATCH] mm: fix finish_fault() handling for large folios

by Brian Geffon

When handling faults for anon shmem finish_fault() will attempt to install ptes for the entire folio. Unfortunately if it encounters a single non-pte_none entry in that range it will bail, even if the pte that triggered the fault is still pte_none. When this situation happens the fault will be retried endlessly never making forward progress. This patch fixes this behavior and if it detects that a pte in the range is not pte_none it will fall back to setting just the pte for the address that triggered the fault. Cc: stable(a)vger.kernel.org Cc: Baolin Wang <baolin.wang(a)linux.alibaba.com> Cc: Hugh Dickins <hughd(a)google.com> Fixes: 43e027e41423 ("mm: memory: extend finish_fault() to support large folio") Reported-by: Marek Maslanka <mmaslanka(a)google.com> Signed-off-by: Brian Geffon <bgeffon(a)google.com> --- mm/memory.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index b4d3d4893267..32de626ec1da 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -5258,9 +5258,22 @@ vm_fault_t finish_fault(struct vm_fault *vmf) ret = VM_FAULT_NOPAGE; goto unlock; } else if (nr_pages > 1 && !pte_range_none(vmf->pte, nr_pages)) { - update_mmu_tlb_range(vma, addr, vmf->pte, nr_pages); - ret = VM_FAULT_NOPAGE; - goto unlock; + /* + * We encountered a set pte, let's just try to install the + * pte for the original fault if that pte is still pte none. + */ + pgoff_t idx = (vmf->address - addr) / PAGE_SIZE; + + if (!pte_none(ptep_get_lockless(vmf->pte + idx))) { + update_mmu_tlb_range(vma, addr, vmf->pte, nr_pages); + ret = VM_FAULT_NOPAGE; + goto unlock; + } + + vmf->pte = vmf->pte + idx; + page = folio_page(folio, idx); + addr = vmf->address; + nr_pages = 1; } folio_ref_add(folio, nr_pages - 1); -- 2.48.1.711.g2feabab25a-goog

10 months

4
11
0 0

[PATCH] xen/pciback: Make missing GSI non-fatal

by Jason Andryuk

A PCI may not have a legacy IRQ. In that case, do not fail assigning to the pciback stub. Instead just skip xen_pvh_setup_gsi(). This will leave psdev->gsi == -1. In that case, when reading the value via IOCTL_PRIVCMD_PCIDEV_GET_GSI, return -ENOENT. Userspace can used this to distinquish from other errors. Fixes: b166b8ab4189 ("xen/pvh: Setup gsi for passthrough device") Cc: stable(a)vger.kernel.org Signed-off-by: Jason Andryuk <jason.andryuk(a)amd.com> --- drivers/xen/acpi.c | 4 ++-- drivers/xen/xen-pciback/pci_stub.c | 17 ++++++++++------- 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/xen/acpi.c b/drivers/xen/acpi.c index d2ee605c5ca1..d6ab0cb3ba3f 100644 --- a/drivers/xen/acpi.c +++ b/drivers/xen/acpi.c @@ -101,7 +101,7 @@ int xen_acpi_get_gsi_info(struct pci_dev *dev, pin = dev->pin; if (!pin) - return -EINVAL; + return -ENOENT; entry = acpi_pci_irq_lookup(dev, pin); if (entry) { @@ -116,7 +116,7 @@ int xen_acpi_get_gsi_info(struct pci_dev *dev, gsi = -1; if (gsi < 0) - return -EINVAL; + return -ENOENT; *gsi_out = gsi; *trigger_out = trigger; diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index b616b7768c3b..9715c2f70586 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -240,6 +240,9 @@ static int pcistub_get_gsi_from_sbdf(unsigned int sbdf) if (!psdev) return -ENODEV; + if (psdev->gsi == -1) + return -ENOENT; + return psdev->gsi; } #endif @@ -475,14 +478,14 @@ static int pcistub_init_device(struct pcistub_device *psdev) #ifdef CONFIG_XEN_ACPI if (xen_initial_domain() && xen_pvh_domain()) { err = xen_acpi_get_gsi_info(dev, &gsi, &trigger, &polarity); - if (err) { - dev_err(&dev->dev, "Fail to get gsi info!\n"); - goto config_release; + if (err && err != -ENOENT) { + dev_err(&dev->dev, "Failed to get gsi info! %d\n", err); + } else if (!err) { + err = xen_pvh_setup_gsi(gsi, trigger, polarity); + if (err) + goto config_release; + psdev->gsi = gsi; } - err = xen_pvh_setup_gsi(gsi, trigger, polarity); - if (err) - goto config_release; - psdev->gsi = gsi; } #endif -- 2.34.1

10 months

3
4
0 0

[PATCH v2] usb: xhci: lack of clearing xHC resources

by Pawel Laszczak

The xHC resources allocated for USB devices are not released in correct order after resuming in case when while suspend device was reconnected. This issue has been detected during the fallowing scenario: - connect hub HS to root port - connect LS/FS device to hub port - wait for enumeration to finish - force host to suspend - reconnect hub attached to root port - wake host For this scenario during enumeration of USB LS/FS device the Cadence xHC reports completion error code for xHC commands because the xHC resources used for devices has not been property released. XHCI specification doesn't mention that device can be reset in any order so, we should not treat this issue as Cadence xHC controller bug. Similar as during disconnecting in this case the device resources should be cleared starting form the last usb device in tree toward the root hub. To fix this issue usbcore driver should call hcd->driver->reset_device for all USB devices connected to hub which was reconnected while suspending. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable(a)vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell(a)cadence.com> --- Changelog: v2: - Replaced disconnection procedure with releasing only the xHC resources drivers/usb/core/hub.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a76bb50b6202..d3f89528a414 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -6065,6 +6065,36 @@ void usb_hub_cleanup(void) usb_deregister(&hub_driver); } /* usb_hub_cleanup() */ +/** + * hub_hc_release_resources - clear resources used by host controller + * @pdev: pointer to device being released + * + * Context: task context, might sleep + * + * Function releases the host controller resources in correct order before + * making any operation on resuming usb device. The host controller resources + * allocated for devices in tree should be released starting from the last + * usb device in tree toward the root hub. This function is used only during + * resuming device when usb device require reinitialization - that is, when + * flag udev->reset_resume is set. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +static void hub_hc_release_resources(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int i; + + /* Release up resources for all children before this device */ + for (i = 0; i < udev->maxchild; i++) + if (hub->ports[i]->child) + hub_hc_release_resources(hub->ports[i]->child); + + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); +} + /** * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) @@ -6131,6 +6161,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) mutex_lock(hcd->address0_mutex); + if (udev->reset_resume) + hub_hc_release_resources(udev); + for (i = 0; i < PORT_INIT_TRIES; ++i) { if (hub_port_stop_enumerate(parent_hub, port1, i)) { ret = -ENODEV; -- 2.43.0

10 months

3
4
0 0

[PATCH v2] arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S

by Justin Klaassen

The u2phy1_host should always have the same status as usb_host1_ehci and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be initialized for a disabled usb port. Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to the vdd_5v regulator. Fixes: db792e9adbf8 ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S") Cc: stable(a)vger.kernel.org Signed-off-by: Justin Klaassen <justin(a)tidylabs.net> Reviewed-by: Dragan Simic <dsimic(a)manjaro.org> --- v1 -> v2: Updated commit message, added Fixes: and Cc: stable tags arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi index b1c9bd0e63ef..8d94d9f91a5c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi @@ -115,7 +115,7 @@ &u2phy0_host { }; &u2phy1_host { - status = "disabled"; + phy-supply = <&vdd_5v>; }; &uart0 { -- 2.47.1

10 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025