February 2025 - Linux-stable-mirror

[PATCH 6/8] arm64: dts: qcom: x1e80100-yoga-slim7x: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree") Cc: stable(a)vger.kernel.org # 6.11 Cc: Srinivas Kandagatla <srinivas.kandagatla(a)linaro.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index a3d53f2ba2c3..9d4ba9728355 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -290,6 +290,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l14b_3p0: ldo14 { @@ -304,8 +305,8 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; - }; regulators-1 { -- 2.45.3

3 months, 3 weeks

1
0
0 0

[PATCH 5/8] arm64: dts: qcom: x1e80100-hp-x14: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 6f18b8d4142c ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14") Cc: stable(a)vger.kernel.org # 6.14 Cc: Jens Glathe <jens.glathe(a)oldschoolsolutions.biz> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index cd860a246c45..ab5addb33b7a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -633,6 +633,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -654,6 +655,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.45.3

3 months, 3 weeks

1
0
0 0

[PATCH 3/8] arm64: dts: qcom: x1e001de-devkit: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7b8a31e82b87 ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows") Cc: stable(a)vger.kernel.org # 6.14 Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index 5e3970b26e2f..f92bda2d34f2 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -507,6 +507,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -528,6 +529,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.45.3

3 months, 3 weeks

1
0
0 0

[PATCH 2/8] arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: 7d1cbe2f4985 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6") Cc: stable(a)vger.kernel.org # 6.12 Cc: Konrad Dybcio <konradybcio(a)kernel.org> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts index b2c2347f54fa..7f756ce48d2f 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts @@ -344,6 +344,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -365,6 +366,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l17b_2p5: ldo17 { -- 2.45.3

3 months, 3 weeks

1
0
0 0

[PATCH 1/8] arm64: dts: qcom: x1e80100-crd: mark l12b and l15b always-on

by Johan Hovold

The l12b and l15b supplies are used by components that are not (fully) described (and some never will be) and must never be disabled. Mark the regulators as always-on to prevent them from being disabled, for example, when consumers probe defer or suspend. Fixes: bd50b1f5b6f3 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device") Cc: stable(a)vger.kernel.org # 6.8 Cc: Abel Vesa <abel.vesa(a)linaro.org> Cc: Rajendra Nayak <quic_rjendra(a)quicinc.com> Cc: Sibi Sankar <quic_sibis(a)quicinc.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index ff5b3472fafd..ffce8f1eb2e1 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -437,6 +437,7 @@ vreg_l12b_1p2: ldo12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l13b_3p0: ldo13 { @@ -458,6 +459,7 @@ vreg_l15b_1p8: ldo15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; }; vreg_l16b_2p9: ldo16 { -- 2.45.3

3 months, 3 weeks

1
0
0 0

[PATCH 0/6] drm/v3d: Fix GPU reset issues on the Raspberry Pi 5

by Maíra Canal

This series addresses GPU reset issues reported in [1], where running a long compute job would trigger repeated GPU resets, leading to a UI freeze. Patches #1 and #2 prevent the same faulty job from being resubmitted in a loop, mitigating the first cause of the issue. However, the issue isn't entirely solved. Even with only a single GPU reset, the UI still freezes on the Raspberry Pi 5, indicating a GPU hang. Patches #3 to #5 address this by properly configuring the V3D_SMS registers, which are required for power management and resets in V3D 7.1. Patch #6 updates the DT maintainership, replacing Emma with the current v3d driver maintainer. [1] https://github.com/raspberrypi/linux/issues/6660 Best Regards, - Maíra --- Maíra Canal (6): drm/v3d: Don't run jobs that have errors flagged in its fence drm/v3d: Set job pointer to NULL when the job's fence has an error drm/v3d: Associate a V3D tech revision to all supported devices dt-bindings: gpu: v3d: Add SMS to the registers' list drm/v3d: Use V3D_SMS registers for power on/off and reset on V3D 7.x dt-bindings: gpu: Add V3D driver maintainer as DT maintainer .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 8 +-- drivers/gpu/drm/v3d/v3d_drv.c | 58 ++++++++++++++++++++-- drivers/gpu/drm/v3d/v3d_drv.h | 18 +++++++ drivers/gpu/drm/v3d/v3d_gem.c | 17 +++++++ drivers/gpu/drm/v3d/v3d_regs.h | 26 ++++++++++ drivers/gpu/drm/v3d/v3d_sched.c | 23 +++++++-- 6 files changed, 140 insertions(+), 10 deletions(-) --- base-commit: 099b79f94366f3110783301e20d8136d762247f8 change-id: 20250224-v3d-gpu-reset-fixes-2d21fc70711d

3 months, 3 weeks

2
2
0 0

[PATCH 3/4] drm/xe: Fix fault mode invalidation with unbind

by Thomas Hellström

Fix fault mode invalidation racing with unbind leading to the PTE zapping potentially traversing an invalid page-table tree. Do this by holding the notifier lock across PTE zapping. This might transfer any contention waiting on the notifier seqlock read side to the notifier lock read side, but that shouldn't be a major problem. At the same time get rid of the open-coded invalidation in the bind code by relying on the notifier even when the vma bind is not yet committed. Finally let userptr invalidation call a dedicated xe_vm function performing a full invalidation. Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job") Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.12+ Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/gpu/drm/xe/xe_pt.c | 38 ++++------------ drivers/gpu/drm/xe/xe_vm.c | 78 ++++++++++++++++++++------------ drivers/gpu/drm/xe/xe_vm.h | 8 ++++ drivers/gpu/drm/xe/xe_vm_types.h | 4 +- 4 files changed, 68 insertions(+), 60 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_pt.c b/drivers/gpu/drm/xe/xe_pt.c index 1ddcc7e79a93..12a627a23eb4 100644 --- a/drivers/gpu/drm/xe/xe_pt.c +++ b/drivers/gpu/drm/xe/xe_pt.c @@ -1213,42 +1213,22 @@ static int vma_check_userptr(struct xe_vm *vm, struct xe_vma *vma, return 0; uvma = to_userptr_vma(vma); - notifier_seq = uvma->userptr.notifier_seq; + if (xe_pt_userptr_inject_eagain(uvma)) + xe_vma_userptr_force_invalidate(uvma); - if (uvma->userptr.initial_bind && !xe_vm_in_fault_mode(vm)) - return 0; + notifier_seq = uvma->userptr.notifier_seq; if (!mmu_interval_read_retry(&uvma->userptr.notifier, - notifier_seq) && - !xe_pt_userptr_inject_eagain(uvma)) + notifier_seq)) return 0; - if (xe_vm_in_fault_mode(vm)) { + if (xe_vm_in_fault_mode(vm)) return -EAGAIN; - } else { - spin_lock(&vm->userptr.invalidated_lock); - list_move_tail(&uvma->userptr.invalidate_link, - &vm->userptr.invalidated); - spin_unlock(&vm->userptr.invalidated_lock); - - if (xe_vm_in_preempt_fence_mode(vm)) { - struct dma_resv_iter cursor; - struct dma_fence *fence; - long err; - - dma_resv_iter_begin(&cursor, xe_vm_resv(vm), - DMA_RESV_USAGE_BOOKKEEP); - dma_resv_for_each_fence_unlocked(&cursor, fence) - dma_fence_enable_sw_signaling(fence); - dma_resv_iter_end(&cursor); - - err = dma_resv_wait_timeout(xe_vm_resv(vm), - DMA_RESV_USAGE_BOOKKEEP, - false, MAX_SCHEDULE_TIMEOUT); - XE_WARN_ON(err <= 0); - } - } + /* + * Just continue the operation since exec or rebind worker + * will take care of rebinding. + */ return 0; } diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 4c1ca47667ad..37d773c0b729 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -580,51 +580,26 @@ static void preempt_rebind_work_func(struct work_struct *w) trace_xe_vm_rebind_worker_exit(vm); } -static bool vma_userptr_invalidate(struct mmu_interval_notifier *mni, - const struct mmu_notifier_range *range, - unsigned long cur_seq) +static void __vma_userptr_invalidate(struct xe_vm *vm, struct xe_userptr_vma *uvma) { - struct xe_userptr *userptr = container_of(mni, typeof(*userptr), notifier); - struct xe_userptr_vma *uvma = container_of(userptr, typeof(*uvma), userptr); + struct xe_userptr *userptr = &uvma->userptr; struct xe_vma *vma = &uvma->vma; - struct xe_vm *vm = xe_vma_vm(vma); struct dma_resv_iter cursor; struct dma_fence *fence; long err; - xe_assert(vm->xe, xe_vma_is_userptr(vma)); - trace_xe_vma_userptr_invalidate(vma); - - if (!mmu_notifier_range_blockable(range)) - return false; - - vm_dbg(&xe_vma_vm(vma)->xe->drm, - "NOTIFIER: addr=0x%016llx, range=0x%016llx", - xe_vma_start(vma), xe_vma_size(vma)); - - down_write(&vm->userptr.notifier_lock); - mmu_interval_set_seq(mni, cur_seq); - - /* No need to stop gpu access if the userptr is not yet bound. */ - if (!userptr->initial_bind) { - up_write(&vm->userptr.notifier_lock); - return true; - } - /* * Tell exec and rebind worker they need to repin and rebind this * userptr. */ if (!xe_vm_in_fault_mode(vm) && - !(vma->gpuva.flags & XE_VMA_DESTROYED) && vma->tile_present) { + !(vma->gpuva.flags & XE_VMA_DESTROYED)) { spin_lock(&vm->userptr.invalidated_lock); list_move_tail(&userptr->invalidate_link, &vm->userptr.invalidated); spin_unlock(&vm->userptr.invalidated_lock); } - up_write(&vm->userptr.notifier_lock); - /* * Preempt fences turn into schedule disables, pipeline these. * Note that even in fault mode, we need to wait for binds and @@ -642,11 +617,35 @@ static bool vma_userptr_invalidate(struct mmu_interval_notifier *mni, false, MAX_SCHEDULE_TIMEOUT); XE_WARN_ON(err <= 0); - if (xe_vm_in_fault_mode(vm)) { + if (xe_vm_in_fault_mode(vm) && userptr->initial_bind) { err = xe_vm_invalidate_vma(vma); XE_WARN_ON(err); } +} + +static bool vma_userptr_invalidate(struct mmu_interval_notifier *mni, + const struct mmu_notifier_range *range, + unsigned long cur_seq) +{ + struct xe_userptr_vma *uvma = container_of(mni, typeof(*uvma), userptr.notifier); + struct xe_vma *vma = &uvma->vma; + struct xe_vm *vm = xe_vma_vm(vma); + + xe_assert(vm->xe, xe_vma_is_userptr(vma)); + trace_xe_vma_userptr_invalidate(vma); + + if (!mmu_notifier_range_blockable(range)) + return false; + vm_dbg(&xe_vma_vm(vma)->xe->drm, + "NOTIFIER: addr=0x%016llx, range=0x%016llx", + xe_vma_start(vma), xe_vma_size(vma)); + + down_write(&vm->userptr.notifier_lock); + mmu_interval_set_seq(mni, cur_seq); + + __vma_userptr_invalidate(vm, uvma); + up_write(&vm->userptr.notifier_lock); trace_xe_vma_userptr_invalidate_complete(vma); return true; @@ -656,6 +655,27 @@ static const struct mmu_interval_notifier_ops vma_userptr_notifier_ops = { .invalidate = vma_userptr_invalidate, }; +#if IS_ENABLED(CONFIG_DRM_XE_USERPTR_INVAL_INJECT) +/** + * xe_vma_userptr_force_invalidate() - force invalidate a userptr + * @uvma: The userptr vma to invalidate + * + * Perform a forced userptr invalidation for testing purposes. + */ +void xe_vma_userptr_force_invalidate(struct xe_userptr_vma *uvma) +{ + struct xe_vm *vm = xe_vma_vm(&uvma->vma); + + lockdep_assert_held_write(&vm->lock); + lockdep_assert_held(&vm->userptr.notifier_lock); + + if (!mmu_interval_read_retry(&uvma->userptr.notifier, + uvma->userptr.notifier_seq)) + uvma->userptr.notifier_seq -= 2; + __vma_userptr_invalidate(vm, uvma); +} +#endif + int xe_vm_userptr_pin(struct xe_vm *vm) { struct xe_userptr_vma *uvma, *next; diff --git a/drivers/gpu/drm/xe/xe_vm.h b/drivers/gpu/drm/xe/xe_vm.h index 7c8e39049223..f5d835271350 100644 --- a/drivers/gpu/drm/xe/xe_vm.h +++ b/drivers/gpu/drm/xe/xe_vm.h @@ -287,4 +287,12 @@ struct xe_vm_snapshot *xe_vm_snapshot_capture(struct xe_vm *vm); void xe_vm_snapshot_capture_delayed(struct xe_vm_snapshot *snap); void xe_vm_snapshot_print(struct xe_vm_snapshot *snap, struct drm_printer *p); void xe_vm_snapshot_free(struct xe_vm_snapshot *snap); + +#if IS_ENABLED(CONFIG_DRM_XE_USERPTR_INVAL_INJECT) +void xe_vma_userptr_force_invalidate(struct xe_userptr_vma *uvma); +#else +static inline void xe_vma_userptr_force_invalidate(struct xe_userptr_vma *uvma) +{ +} +#endif #endif diff --git a/drivers/gpu/drm/xe/xe_vm_types.h b/drivers/gpu/drm/xe/xe_vm_types.h index 52467b9b5348..1fe79bf23b6b 100644 --- a/drivers/gpu/drm/xe/xe_vm_types.h +++ b/drivers/gpu/drm/xe/xe_vm_types.h @@ -228,8 +228,8 @@ struct xe_vm { * up for revalidation. Protected from access with the * @invalidated_lock. Removing items from the list * additionally requires @lock in write mode, and adding - * items to the list requires the @userptr.notifer_lock in - * write mode. + * items to the list requires either the @userptr.notifer_lock in + * write mode, OR @lock in write mode. */ struct list_head invalidated; } userptr; -- 2.48.1

3 months, 3 weeks

2
1
0 0

[PATCH] rapidio: fix an API misues when rio_add_net() fails

by Haoxiang Li

rio_add_net() calls device_register() and fails when device_register() fails. Thus, put_device() should be used rather than kfree(). Fixes: e8de370188d0 ("rapidio: add mport char device driver") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/rapidio/devices/rio_mport_cdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c index 27afbb9d544b..cfff1c82fb25 100644 --- a/drivers/rapidio/devices/rio_mport_cdev.c +++ b/drivers/rapidio/devices/rio_mport_cdev.c @@ -1742,7 +1742,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv, err = rio_add_net(net); if (err) { rmcd_debug(RDEV, "failed to register net, err=%d", err); - kfree(net); + put_device(&net->dev); goto cleanup; } } -- 2.25.1

3 months, 3 weeks

2
1
0 0

[PATCH] dpll: Add a check before kfree() to match the existing check before kmemdup()

by Jiasheng Jiang

When src->freq_supported is not NULL but src->freq_supported_num is 0, dst->freq_supported is equal to src->freq_supported. In this case, if the subsequent kstrdup() fails, src->freq_supported may be freed without being set to NULL, potentially leading to a use-after-free or double-free error. Fixes: 830ead5fb0c5 ("dpll: fix pin dump crash for rebound module") Cc: <stable(a)vger.kernel.org> # v6.8+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool(a)gmail.com> --- drivers/dpll/dpll_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dpll/dpll_core.c b/drivers/dpll/dpll_core.c index 32019dc33cca..7d147adf8455 100644 --- a/drivers/dpll/dpll_core.c +++ b/drivers/dpll/dpll_core.c @@ -475,7 +475,8 @@ static int dpll_pin_prop_dup(const struct dpll_pin_properties *src, err_panel_label: kfree(dst->board_label); err_board_label: - kfree(dst->freq_supported); + if (src->freq_supported_num) + kfree(dst->freq_supported); return -ENOMEM; } -- 2.25.1

3 months, 3 weeks

5
9
0 0

[PATCH 2/4] drm/xe/vm: Fix a misplaced #endif

by Thomas Hellström

Fix a (harmless) misplaced #endif leading to declarations appearing multiple times. Fixes: 0eb2a18a8fad ("drm/xe: Implement VM snapshot support for BO's and userptr") Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com> Cc: José Roberto de Souza <jose.souza(a)intel.com> Cc: <stable(a)vger.kernel.org> # v6.9+ Signed-off-by: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> --- drivers/gpu/drm/xe/xe_vm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_vm.h b/drivers/gpu/drm/xe/xe_vm.h index f66075f8a6fe..7c8e39049223 100644 --- a/drivers/gpu/drm/xe/xe_vm.h +++ b/drivers/gpu/drm/xe/xe_vm.h @@ -282,9 +282,9 @@ static inline void vm_dbg(const struct drm_device *dev, const char *format, ...) { /* noop */ } #endif -#endif struct xe_vm_snapshot *xe_vm_snapshot_capture(struct xe_vm *vm); void xe_vm_snapshot_capture_delayed(struct xe_vm_snapshot *snap); void xe_vm_snapshot_print(struct xe_vm_snapshot *snap, struct drm_printer *p); void xe_vm_snapshot_free(struct xe_vm_snapshot *snap); +#endif -- 2.48.1

3 months, 3 weeks

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2025