April 2025 - Linux-stable-mirror

Re: Patch "x86/mm/ident_map: Fix theoretical virtual address overflow to zero" has been added to the 6.14-stable tree

by Kirill A. Shutemov

On Mon, Apr 14, 2025 at 06:37:27AM -0400, Sasha Levin wrote: > This is a note to let you know that I've just added the patch titled > > x86/mm/ident_map: Fix theoretical virtual address overflow to zero > > to the 6.14-stable tree which can be found at: > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… > > The filename of the patch is: > x86-mm-ident_map-fix-theoretical-virtual-address-ove.patch > and it can be found in the queue-6.14 subdirectory. > > If you, or anyone else, feels it should not be added to the stable tree, > please let <stable(a)vger.kernel.org> know about it. It was explicitly called out that no backporting needed: > [ Backporter's note: there's no need to backport this patch. ] -- Kiryl Shutsemau / Kirill A. Shutemov

4 months, 2 weeks

2
3
0 0

[PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs

by Avadhut Naik

Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD EPYC SOCs has an Address Mask and a Secondary Address Mask register associated with it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity during init using these two registers. Currently, the module primarily considers only the Address Mask register for computing DIMM sizes. The Secondary Address Mask register is only considered for odd CS. Additionally, if it has been considered, the Address Mask register is ignored altogether for that CS. For power-of-two DIMMs, this is not an issue since only the Address Mask register is used. For non-power-of-two DIMMs, however, the Secondary Address Mask register is used in conjunction with the Address Mask register. However, since the module only considers either of the two registers for a CS, the size computed by the module is incorrect. The Secondary Address Mask register is not considered for even CS, and the Address Mask register is not considered for odd CS. Furthermore, also rename some variables for greater clarity. Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs") Signed-off-by: Avadhut Naik <avadhut.naik(a)amd.com> Cc: stable(a)vger.kernel.org --- drivers/edac/amd64_edac.c | 56 ++++++++++++++++++++++++--------------- 1 file changed, 35 insertions(+), 21 deletions(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 90f0eb7cc5b9..16117fda727f 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1209,7 +1209,9 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) if (csrow_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_PRIMARY; - /* Asymmetric dual-rank DIMM support. */ + if (csrow_sec_enabled(2 * dimm, ctrl, pvt)) + cs_mode |= CS_EVEN_SECONDARY; + if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_SECONDARY; @@ -1230,12 +1232,10 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) return cs_mode; } -static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, - int csrow_nr, int dimm) +static int calculate_cs_size(u32 mask, unsigned int cs_mode) { - u32 msb, weight, num_zero_bits; - u32 addr_mask_deinterleaved; - int size = 0; + int msb, weight, num_zero_bits; + u32 deinterleaved_mask = 0; /* * The number of zero bits in the mask is equal to the number of bits @@ -1248,19 +1248,32 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, * without swapping with the most significant bit. This can be handled * by keeping the MSB where it is and ignoring the single zero bit. */ - msb = fls(addr_mask_orig) - 1; - weight = hweight_long(addr_mask_orig); + msb = fls(mask) - 1; + weight = hweight_long(mask); num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE); /* Take the number of zero bits off from the top of the mask. */ - addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1); + deinterleaved_mask = GENMASK(msb - num_zero_bits, 1); + edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", deinterleaved_mask); + + return (deinterleaved_mask >> 2) + 1; +} + +static int __addr_mask_to_cs_size(u32 addr_mask, u32 addr_mask_sec, + unsigned int cs_mode, int csrow_nr, int dimm) +{ + int size = 0; edac_dbg(1, "CS%d DIMM%d AddrMasks:\n", csrow_nr, dimm); - edac_dbg(1, " Original AddrMask: 0x%x\n", addr_mask_orig); - edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", addr_mask_deinterleaved); + edac_dbg(1, " Primary AddrMask: 0x%x\n", addr_mask); /* Register [31:1] = Address [39:9]. Size is in kBs here. */ - size = (addr_mask_deinterleaved >> 2) + 1; + size = calculate_cs_size(addr_mask, cs_mode); + + if (addr_mask_sec) { + edac_dbg(1, " Secondary AddrMask: 0x%x\n", addr_mask); + size += calculate_cs_size(addr_mask_sec, cs_mode); + } /* Return size in MBs. */ return size >> 10; @@ -1270,7 +1283,7 @@ static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { int cs_mask_nr = csrow_nr; - u32 addr_mask_orig; + u32 addr_mask = 0, addr_mask_sec = 0; int dimm, size = 0; /* No Chip Selects are enabled. */ @@ -1308,13 +1321,13 @@ static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, if (!pvt->flags.zn_regs_v2) cs_mask_nr >>= 1; - /* Asymmetric dual-rank DIMM support. */ - if ((csrow_nr & 1) && (cs_mode & CS_ODD_SECONDARY)) - addr_mask_orig = pvt->csels[umc].csmasks_sec[cs_mask_nr]; - else - addr_mask_orig = pvt->csels[umc].csmasks[cs_mask_nr]; + if (cs_mode & CS_EVEN_PRIMARY || cs_mode & CS_ODD_PRIMARY) + addr_mask = pvt->csels[umc].csmasks[cs_mask_nr]; + + if (cs_mode & CS_EVEN_SECONDARY || cs_mode & CS_ODD_SECONDARY) + addr_mask_sec = pvt->csels[umc].csmasks_sec[cs_mask_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, dimm); + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, dimm); } static void umc_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) @@ -3512,9 +3525,10 @@ static void gpu_get_err_info(struct mce *m, struct err_info *err) static int gpu_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { - u32 addr_mask_orig = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask_sec = pvt->csels[umc].csmasks_sec[csrow_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, csrow_nr >> 1); + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, csrow_nr >> 1); } static void gpu_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) base-commit: f1861fb575b028e35e6233295441d535f2e3f240 -- 2.43.0

4 months, 2 weeks

3
4
0 0

[PATCH v3] iio: adc: Correct conditional logic for store mode

by Gabriel Shahrouzi

The mode setting logic in ad7816_store_mode was reversed due to incorrect handling of the strcmp return value. strcmp returns 0 on match, so the `if (strcmp(buf, "full"))` block executed when the input was not "full". This resulted in "full" setting the mode to AD7816_PD (power-down) and other inputs setting it to AD7816_FULL. Fix this by checking it against 0 to correctly check for "full" and "power-down", mapping them to AD7816_FULL and AD7816_PD respectively. Fixes: 7924425db04a ("staging: iio: adc: new driver for AD7816 devices") Cc: stable(a)vger.kernel.org Signed-off-by: Gabriel Shahrouzi <gshahrouzi(a)gmail.com> --- Changes since v3: - Tag stable(a)vger.kernel.org instead of an email CC - Use the correct version for patch Changes since v2: - Add fixes tag that references commit that introduced the bug. - Replace sysfs_streq with strcmp. --- drivers/staging/iio/adc/ad7816.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index 6c14d7bcdd675..081b17f498638 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -136,7 +136,7 @@ static ssize_t ad7816_store_mode(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7816_chip_info *chip = iio_priv(indio_dev); - if (strcmp(buf, "full")) { + if (strcmp(buf, "full") == 0) { gpiod_set_value(chip->rdwr_pin, 1); chip->mode = AD7816_FULL; } else { -- 2.43.0

4 months, 2 weeks

1
0
0 0

[PATCH] iio: adc: Correct conditional logic for store mode

by Gabriel Shahrouzi

The mode setting logic in ad7816_store_mode was reversed due to incorrect handling of the strcmp return value. strcmp returns 0 on match, so the `if (strcmp(buf, "full"))` block executed when the input was not "full". This resulted in "full" setting the mode to AD7816_PD (power-down) and other inputs setting it to AD7816_FULL. Fix this by checking it against 0 to correctly check for "full" and "power-down", mapping them to AD7816_FULL and AD7816_PD respectively. Fixes: 7924425db04a ("staging: iio: adc: new driver for AD7816 devices") Signed-off-by: Gabriel Shahrouzi <gshahrouzi(a)gmail.com> --- Changes since v2: - Add fixes tag that references commit that introduced the bug. - Replace sysfs_streq with strcmp. --- drivers/staging/iio/adc/ad7816.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c index 6c14d7bcdd675..081b17f498638 100644 --- a/drivers/staging/iio/adc/ad7816.c +++ b/drivers/staging/iio/adc/ad7816.c @@ -136,7 +136,7 @@ static ssize_t ad7816_store_mode(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7816_chip_info *chip = iio_priv(indio_dev); - if (strcmp(buf, "full")) { + if (strcmp(buf, "full") == 0) { gpiod_set_value(chip->rdwr_pin, 1); chip->mode = AD7816_FULL; } else { -- 2.43.0

4 months, 2 weeks

2
1
0 0

[PATCH] net: usb: lan78xx: Enforce a minimum interrupt polling period

by Fiona Klute

If a new reset event appears before the previous one has been processed, the device can get stuck into a reset loop. This happens rarely, but blocks the device when it does, and floods the log with messages like the following: lan78xx 2-3:1.0 enp1s0u3: kevent 4 may have been dropped The only bit that the driver pays attention to in the interrupt data is "link was reset". If there's a flapping status bit in that endpoint data (such as if PHY negotiation needs a few tries to get a stable link), polling at a slower rate allows the state to settle. This is a simplified version of a patch that's been in the Raspberry Pi downstream kernel since their 4.14 branch, see also: https://github.com/raspberrypi/linux/issues/2447 Signed-off-by: Fiona Klute <fiona.klute(a)gmx.de> Cc: kernel-list(a)raspberrypi.com Cc: stable(a)vger.kernel.org --- For the stable crew: I've *tested* the patch with 6.12.7 and 6.13.5 on a Revolution Pi Connect 4 (Raspberry Pi CM4 based device with built-in LAN7800 as second ethernet port), according to the linked issue for the RPi downstream kernel the problem should be present in all maintained longterm kernel versions, too (based on how long they've carried a patch). drivers/net/usb/lan78xx.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index a91bf9c7e31d..7bf01a31a932 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -173,6 +173,12 @@ #define INT_EP_GPIO_1 (1) #define INT_EP_GPIO_0 (0) +/* highspeed device, so polling interval is in microframes (eight per + * millisecond) + */ +#define INT_URB_MICROFRAMES_PER_MS 8 +#define MIN_INT_URB_INTERVAL_MS 8 + static const char lan78xx_gstrings[][ETH_GSTRING_LEN] = { "RX FCS Errors", "RX Alignment Errors", @@ -4527,7 +4533,11 @@ static int lan78xx_probe(struct usb_interface *intf, if (ret < 0) goto out4; - period = ep_intr->desc.bInterval; + period = max(ep_intr->desc.bInterval, + MIN_INT_URB_INTERVAL_MS * INT_URB_MICROFRAMES_PER_MS); + dev_info(&intf->dev, + "interrupt urb period set to %d, bInterval is %d\n", + period, ep_intr->desc.bInterval); maxp = usb_maxpacket(dev->udev, dev->pipe_intr); dev->urb_intr = usb_alloc_urb(0, GFP_KERNEL); base-commit: dd83757f6e686a2188997cb58b5975f744bb7786 -- 2.47.2

4 months, 2 weeks

3
9
0 0

[PATCH] objtool/rust: add one more `noreturn` Rust function

by Miguel Ojeda

Starting with Rust 1.86.0 (see upstream commit b151b513ba2b ("Insert null checks for pointer dereferences when debug assertions are enabled") [1]), under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`, one may trigger a new `objtool` warning: rust/kernel.o: warning: objtool: _R..._6kernel9workqueue6system() falls through to next function _R...9workqueue14system_highpri() due to a call to the `noreturn` symbol: core::panicking::panic_null_pointer_dereference Thus add it to the list so that `objtool` knows it is actually `noreturn`. See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") for more details. Cc: stable(a)vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Fixes: 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") Link: https://github.com/rust-lang/rust/commit/b151b513ba2b65c7506ec1a80f2712bbd0… [1] Signed-off-by: Miguel Ojeda <ojeda(a)kernel.org> --- tools/objtool/check.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 4a1f6c3169b3..67006eeb30c8 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -225,6 +225,7 @@ static bool is_rust_noreturn(const struct symbol *func) str_ends_with(func->name, "_4core9panicking14panic_nounwind") || str_ends_with(func->name, "_4core9panicking18panic_bounds_check") || str_ends_with(func->name, "_4core9panicking19assert_failed_inner") || + str_ends_with(func->name, "_4core9panicking30panic_null_pointer_dereference") || str_ends_with(func->name, "_4core9panicking36panic_misaligned_pointer_dereference") || strstr(func->name, "_4core9panicking13assert_failed") || strstr(func->name, "_4core9panicking11panic_const24panic_const_") || base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 -- 2.49.0

4 months, 2 weeks

4
4
0 0

[PATCH] rust: fix building firmware abstraction on 32bit arm

by Christian Schrefl

When trying to build the rust firmware abstractions on 32 bit arm the following build error occures: ``` error[E0308]: mismatched types --> rust/kernel/firmware.rs:20:14 | 20 | Self(bindings::request_firmware) | ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item | | | arguments to this function are incorrect | = note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _` found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {request_firmware}` note: tuple struct defined here --> rust/kernel/firmware.rs:14:8 | 14 | struct FwFunc( | ^^^^^^ error[E0308]: mismatched types --> rust/kernel/firmware.rs:24:14 | 24 | Self(bindings::firmware_request_nowarn) | ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item | | | arguments to this function are incorrect | = note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _` found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {firmware_request_nowarn}` note: tuple struct defined here --> rust/kernel/firmware.rs:14:8 | 14 | struct FwFunc( | ^^^^^^ error[E0308]: mismatched types --> rust/kernel/firmware.rs:64:45 | 64 | let ret = unsafe { func.0(pfw as _, name.as_char_ptr(), dev.as_raw()) }; | ------ ^^^^^^^^^^^^^^^^^^ expected `*const i8`, found `*const u8` | | | arguments to this function are incorrect | = note: expected raw pointer `*const i8` found raw pointer `*const u8` error: aborting due to 3 previous errors ``` To fix this error the char pointer type in `FwFunc` is converted to `ffi::c_char`. Fixes: de6582833db0 ("rust: add firmware abstractions") Cc: stable(a)vger.kernel.org # Backport only to 6.15 needed Signed-off-by: Christian Schrefl <chrisi.schrefl(a)gmail.com> --- rust/kernel/firmware.rs | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/rust/kernel/firmware.rs b/rust/kernel/firmware.rs index f04b058b09b2d2397e26344d0e055b3aa5061432..1d6284316f2a4652ef3f76272670e5e29b0ff924 100644 --- a/rust/kernel/firmware.rs +++ b/rust/kernel/firmware.rs @@ -5,14 +5,18 @@ //! C header: [`include/linux/firmware.h`](srctree/include/linux/firmware.h) use crate::{bindings, device::Device, error::Error, error::Result, str::CStr}; -use core::ptr::NonNull; +use core::{ffi, ptr::NonNull}; /// # Invariants /// /// One of the following: `bindings::request_firmware`, `bindings::firmware_request_nowarn`, /// `bindings::firmware_request_platform`, `bindings::request_firmware_direct`. struct FwFunc( - unsafe extern "C" fn(*mut *const bindings::firmware, *const u8, *mut bindings::device) -> i32, + unsafe extern "C" fn( + *mut *const bindings::firmware, + *const ffi::c_char, + *mut bindings::device, + ) -> i32, ); impl FwFunc { --- base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 change-id: 20250408-rust_arm_fix_fw_abstaction-4c3a89d75e29 Best regards, -- Christian Schrefl <chrisi.schrefl(a)gmail.com>

4 months, 2 weeks

5
10
0 0

[PATCH AUTOSEL 5.4 1/5] KVM: s390: Don't use %pK through tracepoints

by Sasha Levin

From: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> [ Upstream commit 6c9567e0850be2f0f94ab64fa6512413fd1a1eb1 ] Restricted pointers ("%pK") are not meant to be used through TP_format(). It can unintentionally expose security sensitive, raw pointer values. Use regular pointer formatting instead. Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c70704… Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Michael Mueller <mimu(a)linux.ibm.com> Link: https://lore.kernel.org/r/20250217-restricted-pointers-s390-v1-1-0e4ace75d8… Signed-off-by: Janosch Frank <frankja(a)linux.ibm.com> Message-ID: <20250217-restricted-pointers-s390-v1-1-0e4ace75d8aa(a)linutronix.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/s390/kvm/trace-s390.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h index 6f0209d45164f..9c5f546a2e1a3 100644 --- a/arch/s390/kvm/trace-s390.h +++ b/arch/s390/kvm/trace-s390.h @@ -56,7 +56,7 @@ TRACE_EVENT(kvm_s390_create_vcpu, __entry->sie_block = sie_block; ), - TP_printk("create cpu %d at 0x%pK, sie block at 0x%pK", + TP_printk("create cpu %d at 0x%p, sie block at 0x%p", __entry->id, __entry->vcpu, __entry->sie_block) ); @@ -255,7 +255,7 @@ TRACE_EVENT(kvm_s390_enable_css, __entry->kvm = kvm; ), - TP_printk("enabling channel I/O support (kvm @ %pK)\n", + TP_printk("enabling channel I/O support (kvm @ %p)\n", __entry->kvm) ); -- 2.39.5

4 months, 2 weeks

1
4
0 0

[PATCH AUTOSEL 6.14 01/34] KVM: s390: Don't use %pK through tracepoints

by Sasha Levin

From: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> [ Upstream commit 6c9567e0850be2f0f94ab64fa6512413fd1a1eb1 ] Restricted pointers ("%pK") are not meant to be used through TP_format(). It can unintentionally expose security sensitive, raw pointer values. Use regular pointer formatting instead. Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c70704… Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Michael Mueller <mimu(a)linux.ibm.com> Link: https://lore.kernel.org/r/20250217-restricted-pointers-s390-v1-1-0e4ace75d8… Signed-off-by: Janosch Frank <frankja(a)linux.ibm.com> Message-ID: <20250217-restricted-pointers-s390-v1-1-0e4ace75d8aa(a)linutronix.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/s390/kvm/trace-s390.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h index 9ac92dbf680db..9e28f165c114c 100644 --- a/arch/s390/kvm/trace-s390.h +++ b/arch/s390/kvm/trace-s390.h @@ -56,7 +56,7 @@ TRACE_EVENT(kvm_s390_create_vcpu, __entry->sie_block = sie_block; ), - TP_printk("create cpu %d at 0x%pK, sie block at 0x%pK", + TP_printk("create cpu %d at 0x%p, sie block at 0x%p", __entry->id, __entry->vcpu, __entry->sie_block) ); @@ -255,7 +255,7 @@ TRACE_EVENT(kvm_s390_enable_css, __entry->kvm = kvm; ), - TP_printk("enabling channel I/O support (kvm @ %pK)\n", + TP_printk("enabling channel I/O support (kvm @ %p)\n", __entry->kvm) ); -- 2.39.5

4 months, 2 weeks

2
34
0 0

[PATCH AUTOSEL 5.10 01/11] KVM: s390: Don't use %pK through tracepoints

by Sasha Levin

From: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> [ Upstream commit 6c9567e0850be2f0f94ab64fa6512413fd1a1eb1 ] Restricted pointers ("%pK") are not meant to be used through TP_format(). It can unintentionally expose security sensitive, raw pointer values. Use regular pointer formatting instead. Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c70704… Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Michael Mueller <mimu(a)linux.ibm.com> Link: https://lore.kernel.org/r/20250217-restricted-pointers-s390-v1-1-0e4ace75d8… Signed-off-by: Janosch Frank <frankja(a)linux.ibm.com> Message-ID: <20250217-restricted-pointers-s390-v1-1-0e4ace75d8aa(a)linutronix.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- arch/s390/kvm/trace-s390.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h index 6f0209d45164f..9c5f546a2e1a3 100644 --- a/arch/s390/kvm/trace-s390.h +++ b/arch/s390/kvm/trace-s390.h @@ -56,7 +56,7 @@ TRACE_EVENT(kvm_s390_create_vcpu, __entry->sie_block = sie_block; ), - TP_printk("create cpu %d at 0x%pK, sie block at 0x%pK", + TP_printk("create cpu %d at 0x%p, sie block at 0x%p", __entry->id, __entry->vcpu, __entry->sie_block) ); @@ -255,7 +255,7 @@ TRACE_EVENT(kvm_s390_enable_css, __entry->kvm = kvm; ), - TP_printk("enabling channel I/O support (kvm @ %pK)\n", + TP_printk("enabling channel I/O support (kvm @ %p)\n", __entry->kvm) ); -- 2.39.5

4 months, 2 weeks

1
10
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2025